Since the update 3.1, my Huawei assistant switched from Portuguese to Chinese.
My phone is a Yal-Al10.
Is there anyway to get it back in portuguese?
marcusasdrubal said:
Since the update 3.1, my Huawei assistant switched from Portuguese to Chinese.
My phone is a Yal-Al10.
Is there anyway to get it back in portuguese?
Click to expand...
Click to collapse
Try checking your phone's language settings. If they are normal, try setting up the assistant again. (clear data in settings and open assistant. It should be reset to as if you're opening it for the first time). Otherwise, I don't really know of any other way.
Related
I was in China recently and bought a Koobee Halo H1 but even when the language is changed to English, it still gives system updates in Chinese and won't let me install Google Play or anything related.
I tried flashing it with the official ROM from NeedRom and it seemed to work but now the screen is completely unresponsive (the screen turns on but the touch screen won't respond when it's pressed). I've tried reflashing it, updating it and so on but the same problem always arises.
Would anyone have any suggestions on how I can get it to use an English operating system that can use Google Play?
Any help greatly appreciated.
Hi all,
I've just got new Amazfit Stratos 3, paired them with the phone and didn't do anything else. When trying to go into the Settings-General, getting the "Unfortunetly, Settings has stopped".
Tried to update Firmware, but when checking on the phone or on the watch it says that it is uptodate: 4.2.0.1.
So how can I fix the Settings error and how can I update from 4.2.0.1?
I have the same problem
i think they're going to push a new firmware because 4.2.6.0 is no more available since this WE.
you can manually push the 4.2.5.0 (last stable) to your watch for the post: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
winni21 said:
i think they're going to push a new firmware because 4.2.6.0 is no more available since this WE.
you can manually push the 4.2.5.0 (last stable) to your watch for the post: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
Click to expand...
Click to collapse
really I must be an IT engineer to do it? is not easy, unlock the watch and push a new firmware.
is not possible other option like the "update firmware" button?
PlataoPlomo said:
really I must be an IT engineer to do it? is not easy, unlock the watch and push a new firmware.
is not possible other option like the "update firmware" button?
Click to expand...
Click to collapse
No need to unlock bootloader to upgrade just copy the OTA file to your watch then run the command to launch the update.
karabel said:
Hi all,
I've just got new Amazfit Stratos 3, paired them with the phone and didn't do anything else. When trying to go into the Settings-General, getting the "Unfortunetly, Settings has stopped".
Tried to update Firmware, but when checking on the phone or on the watch it says that it is uptodate: 4.2.0.1.
So how can I fix the Settings error and how can I update from 4.2.0.1?
Click to expand...
Click to collapse
Check this: https://forum.xda-developers.com/showpost.php?p=82908781&postcount=82
Hi, same problem like @karabel, received today my Stratos 3, no french language??, and the problem with the General menu, tried to go into and got the "Unfortunately, Settings has stopped".
I have updated the firmware 4.2.0.1 to 4.2..6.0 and all been fine . Now General is accessible and all languages are available.
Thank you a lot @Saratoga79 for your support!! I like all you do for these smartwatches!
Ps: Could add in the download folder file Stratos3 a stock_firmware_adb_root_init.d_supersu for this watch as you have done for the PACE ? Many Many thanks!
Hello all!!
I had the same problem, I bought an Stratos 3 with two days ago with Firmware version 4.2.0.1. with no Spanish Language. I have tried to update to a newest version following the instructions said @Saratoga79, but now my watch isn't working. It shows all the time in the screen 'FastBoot' an some Chinese words... I am really desperate, I think I have broken the clock ...
Anyone can help??
Sidnarref said:
Hello all!!
I had the same problem, I bought an Stratos 3 with two days ago with Firmware version 4.2.0.1. with no Spanish Language. I have tried to update to a newest version following the instructions said @Saratoga79, but now my watch isn't working. It shows all the time in the screen 'FastBoot' an some Chinese words... I am really desperate, I think I have broken the clock ...
Anyone can help??
Click to expand...
Click to collapse
What did you exactly use to update?
Hi everybody. I need some help..
I was update my Verge Lite on Notify and Fitness app. I dont know how it happened but it couldnt finish update. I tried 3 times for update again but it couldnt. Then i deleted mi fit, Amazfit app and Notify&fitness app for try again but after install all apps i have a big problem..
Mifit or Amazfit offical app recognize my watch but it failed to try pair. There is some note in Turkish like factory reset. But i cant pair with offical apps. And on the watch screen i can see only "Please open the app and select check for updates on the watch pageto continue update". Also notify&fitness can pair but there is 2 ways i have to do for work Notify&fitness. First way pair with offical app (i cant do this) and the other option is auth key for "no mifit app" option. I searched for that but i think there is one way for find the auth key is ''freemyband''. Freemyband wants pair with an offical app. I cant pair with offical app how can i do that?
I'm lost Please help me. I dont want buy a new watch.. Thank you all and sorry for my bad english
Edit: I fixed my verge lite with helps of @Fardeenansari21. We worked on so much but it was very easy. If your Verge Lite bricked like mine just put into charge dock while pressing button and it will open again.
Hi @10ore, good morning from Spain.
I've got a Verge Lite chinese version and i'm looking for a firmare or trick to get it in English or Spanish. Is it possible? Do yo know how?
In fact I could load a global version and the watch connected with the Amazfit app but a "Please open the app and select check for updates on the watch page to continue update" message appeared. With your proposed solution, I could put into charge and press the button to move between options (in English!!!!) but i haven't found a solution to avoid this semi-bricked message yet. Can you help me? Do you know any solution?
Also, if I connect the watch with the official Amazfit app, it updates de firmware to the lastest official version and the message "Please open the app and select ..... continues forever....
Thank you very much in advance.
txelu.
Hello,
Have global version of the phone. Yesterday have installed Android 12 firmware by OTA.
Always on display functionality doesn't work anymore - have tried all modes and on/off states. Also fingerprint scanner not showing and working on turned off screen at all. On android 11 I was able to unblock phone just using scanner. Now I must turn on screen by power button before. Is any some settings that I've missed or it bug of new firmware?
Also is there a way to downgrade firmware?
Thank you.
Did try to factory reset?
0kti said:
Did try to factory reset?
Click to expand...
Click to collapse
Not yet. Have tried only reset system settings. Now am trying to discover is there any other way that full reset to fix. Have a lot of applications that should be restored and reconfigured after reset...
how could you install it on the global version? what county are you from?
Zierbeek said:
how could you install it on the global version? what county are you from?
Click to expand...
Click to collapse
russia. Just check the update section on the phone...
thanks! is it bad to flash a C version on an A version?
Mike Starkov said:
Not yet. Have tried only reset system settings. Now am trying to discover is there any other way that full reset to fix. Have a lot of applications that should be restored and reconfigured after reset...
Click to expand...
Click to collapse
hi, i have the same problems after updating the os via ota. Both a soft and hard reset were useless
Same bug after upgrading from full ota file
I've have a solution for this issue. It's not ideally - because you cannot restore the phone from backup and need to migrate all data and applications manually.
I have loaded phone in the recovery mode (turning on by power button + volume down button) and perform the wipe data operation. After reboot I've initialized the phone without restoring from backup.
AOD works correctly but the fingerprint sensor doesn't showing by default on AOD screen. I've turned off/on the Show finderprint settings and all works fine.
After that I've installed and initilized all applications from Google play.
I've installed OTA today, have no issues, Global Version, Germany.
Hi, have same problem with mine, Poland - GDPR.
Edit, AOD started working for me after formating data from recovery mode. Dont use in-android wiping.
Edit 2: AOD is working untill i log in to google...
Same issue here! Global Version - Italy
It's very annoying, I hope in a fast new update
Same problem here. Global Version - Spain
No way to make AOD work. Have tried all possible setups. It was working fine in previous version. Quite frustrating.
I've also noticed since updating to Realme UI 3.0 - Android 12, that some apps are asking for fingerprint to unlock, while other apps ask for face unlock...
These apps would always ask for fingerprint in previous version.
Anyone else facing this problem?
I have the same issue when I try to unlock an app with finger. The finger sensor not appears. I must power off screen and then power up for sensor appear and works
okay, recently I bought a used mate20pro online. the set reach my hand safely. to my surprise its LYA-AL00.
as usual, I try to phone clone from my universal Mate 20 to it. after everything is done, I try login to my Huawei ID, can't seem to login.
it pop ups "Unable to obtain data. Please try again later." I tried using SMS method, same popups.
btw, im a Malaysian, the phone can use Malaysian sim without issue. call in or out, sms, surfing and even update from app gallery no issue.
only that I can't login to Huawei and there's no system update at all. stays on EMUI 9 only.
current firmware info:
Base: LYA-LGRP1-CHN 9.0.0.176
Just: LYA-AL00-CUST 9.0.0.170(C00)
Preload: LYA-AL00-PRELOAD 9.0.0.20(C00R1)
can anyone please help?
*** managed to upgrade EMUI 11 thru HiSuite. all the way to Harmony OS 2.0.
my experience, emui11 is more stable compares to Harmony, at least EMUI is more mature.
there's few hiccups on Harmony OS, the accessibility settings seems to reset if the system detects modded app being installed. certain google apps might triggers the accessibility settings resets. kinda bugging me..
joox isnt stable... keep crashing for the first few times every time i wanna listen to fav songs...
but im lazy to revert back to emui...
I have the same model "LYA-00" and I can not update the software. My button does nothing. I tried also through the maintanence tool but no such luck. I'll see if the Hisuite can help.