[GUIDE][MAGISK] Root Access for Redmi 9 Mediatek Helio G80 without TWRP - Redmi 9 / Poco M2 Guides, News, & Discussion

Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
EDIT: NO FORMAT DATA REQUIRED BUT BACKUP ALWAYS RECOMMENDED
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
How to:
STEP 1
- Backup Always Recommended
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img (WARNING: if not successful cause bootloop)
fastboot flash boot magisk_patched.img
fastboot reboot
- Open Magisk Manager (Internet Connection required for download some magisk files and will automatically reboot in 5 minutes)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES
Tested on MIUI 11.0.3.0-11.0.6.0 GLOBAL ID, 11.0.7.0-11.0.8.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Q&A
Q: How to completely uninstall magisk?
A: Flash miui fastboot rom via Mi Flash or Flash full recovery rom
Q: Bootloop?
A: Disable vbmeta not successful, use adb fastboot in my comment or flash stock boot.img
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester

i can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity'

AstroKkngTool said:
i can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity'
Click to expand...
Click to collapse
download my attachment adb_fastboot.zip
extract & copy folder to C:/ then try again

How did you unlock the bootloader on global rom?
Or you have non NFC version of Redmi 9?

afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img
fastboot erase userdata
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
It WORKS. I'm on MIUI 11.0.4.0 GLOBAL. Huge Thanks :fingers-crossed:

Thanks it works my phone .

I am on miui 11.0.2 v. (Redmi 9 prime)
There is no update sill now,
There no Firmware 11.0.2 what I am using
What can I do further????
Can I flash the latest Global Rom on my phone using Fastboot mode????

Why Аndroid is 10 oreo? (pictured)
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img
fastboot erase userdata
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
Why Аndroid is 10 oreo? (pictured)

Mantipallykrishna said:
I am on miui 11.0.2 v. (Redmi 9 prime)
There is no update sill now,
There no Firmware 11.0.2 what I am using
What can I do further????
Can I flash the latest Global Rom on my phone using Fastboot mode????
Click to expand...
Click to collapse
Are you from India? I wanted to ask, is a model with NFC officially sold in your country?

iYowo said:
Why Аndroid is 10 oreo? (pictured)
Click to expand...
Click to collapse
Good catch, I missed this information when I had a look!
It seems to be a issue with the app he's using!
DevCheck by Flar2 (who does the ElementalX kernel for years on many different devices) reports the android version correctly - and I personally trust rather Flar2's App then anything else!
Should be just a bug in the App that OP uses...
Edit: also selinux appears to be disabled in OPs screenshot, I wonder if he did this on purpose or what the deal is (another App bug?) because usually Magisk patches selinux but doesn't disable it, at least from my experience...
Sent from my galahad using XDA Labs

afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
Any bootloop Risk? Please helpme, i am noob
Modelo M2004J19G no NFC
MIUI GLOBAL 11.0.4 STABLE QJCMIXM
Android 10

Sam Nakamura said:
Good catch, I missed this information when I had a look!
It seems to be a issue with the app he's using!
DevCheck by Flar2 (who does the ElementalX kernel for years on many different devices) reports the android version correctly - and I personally trust rather Flar2's App then anything else!
Should be just a bug in the App that OP uses...
Edit: also selinux appears to be disabled in OPs screenshot, I wonder if he did this on purpose or what the deal is (another App bug?) because usually Magisk patches selinux but doesn't disable it, at least from my experience...
Click to expand...
Click to collapse
idk sir, i just download root check app & open it after root successfully ??

KevinTM93 said:
Any bootloop Risk? Please helpme, i am noob
Modelo M2004J19G no NFC
MIUI GLOBAL 11.0.4 STABLE QJCMIXM
Android 10
Click to expand...
Click to collapse
Yes, definitely bootloop risk!
Make sure you understand the instructions in this post and to have the stock kernel stored close to you, in theory you should be easy able to restore the device from bootlooping by flashing the unmodified stock kernel...
And you'll need to unlock the bootloader which will factory reset the device, so before playing around you'll probably want to backup your important files and do the unlocking process, which takes a while on xiaomi phones
Sent from my galahad using XDA Labs

Deleted...already explained

Sam Nakamura said:
Yes, definitely bootloop risk!
Make sure you understand the instructions in this post and to have the stock kernel stored close to you, in theory you should be easy able to restore the device from bootlooping by flashing the unmodified stock kernel...
And you'll need to unlock the bootloader which will factory reset the device, so before playing around you'll probably want to backup your important files and do the unlocking process, which takes a while on xiaomi phones
Click to expand...
Click to collapse
Thank you very much, I understand that there is always a risk of bootloop, but I wanted to know if with those specifications I could perform this method ... another question, where can I download the specific stock rom for my device? I appreciate your help, un MI Page i found MIUI global 11.0.5.0 QJCMIXM, and my device is MIUI global 11.0.4.0 QJCMIXM...

KevinTM93 said:
Thank you very much, I understand that there is always a risk of bootloop, but I wanted to know if with those specifications I could perform this method ... another question, where can I download the specific stock rom for my device? I appreciate your help, un MI Page i found MIUI global 11.0.5.0 QJCMIXM, and my device is MIUI global 11.0.4.0 QJCMIXM...
Click to expand...
Click to collapse
you can find the lancelot miui full recovery rom in here :
https://xiaomifirmwareupdater.com/miui/lancelot/
11.0.5.0 > global stable beta
11.0.4.0 > global stable
if you want 11.0.5.0 so update your rom first,,, if not, you can download miui 11.0.4.0 rom there and ready to patch boot.img...

I can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity

Zeppelin_Elevation said:
Are you from India? I wanted to ask, is a model with NFC officially sold in your country?
Click to expand...
Click to collapse
There is no NFC in Redmi 9 Prime Lancelot (INDIA)

ممكن اتواصل معاك فديو شرح

Hamoo kamshto said:
ممكن اتواصل معاك فديو شر [\QUOTE]
PLEASE use english as required by the forum rules, so everyone can understand and contribute, also you'll get help much faster!
Sent from my Google Pixel 3 XL
Click to expand...
Click to collapse

Related

Magisk on Honor 9 oreo B360

Can anyone provide a guide to install Magisk root on Honor 9 with Oreo B360.
I did search here but didn't find it anywhere.
Thank you.
This magisk 15.4 fully works with honor 9 :
https://forum.xda-developers.com/showthread.php?t=3749280
I'm waiting for someone to confirm everythings also work on magisk 16.0 ; I think one user told it didn't.
oslo83 said:
This magisk 15.4 fully works with honor 9 :
https://forum.xda-developers.com/showthread.php?t=3749280
I'm waiting for someone to confirm everythings also work on magisk 16.0 ; I think one user told it didn't.
Click to expand...
Click to collapse
So, can I just install Magisk zip file with Twrp or do I need to do something else?
It you read the link i sent you, you'll see:
"Instructions
If your device have TWRP support, just directly flash it via TWRP. For devices without TWRP yet (currently all Huawei Treble devices), you can follow the instructions below)"
I didn't tried the twrp way, I did the fastboot way as I did not had a twrp when i did it.
1) Unlock your device (if you haven't not already)
2) Install this TWRP: https://forum.xda-developers.com/honor-9/development/oreo-t3754483
3) Install last version of magisk from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Reboot to system, and check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install/upgrade it manually!
Click to expand...
Click to collapse
I've done this and all working well on B360.
@WFree So you confirm : root, hide root & safetynet checks work fine on Magisk v16.0 with honor 9 on oreo ?
(They do on 15.4(1541))
oslo83 said:
@WFree So you confirm : root, hide root & safetynet checks work fine on Magisk v16.0 with honor 9 on oreo ?
(They do on 15.4(1541))
Click to expand...
Click to collapse
Yes.
Proof here: https://forum.xda-developers.com/showpost.php?p=75689044&postcount=12
The patched image is only 8 mo, is it ok?
How are things going with the OTA updates?
So, using method from " [OFFICIAL] Magisk v16.0 - Root & Universal Systemless Interface [Android 5.0+] " I use adb command , the first is ok
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/MagiskManager/patched_boot.img
When I try the second :
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
I get this message : " < waiting for any device >
Can you help me for that ?
I'm using stock rom , STF L09 8.0.0 360 / c432 to be exact
Thanks !
EDIT : Did I need unlocked bootloader to flash patched boot image ?
sonneper said:
So, using method from " [OFFICIAL] Magisk v16.0 - Root & Universal Systemless Interface [Android 5.0+] " I use adb command , the first is ok
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/MagiskManager/patched_boot.img
When I try the second :
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
I get this message : " < waiting for any device >
Can you help me for that ?
I'm using stock rom , STF L09 8.0.0 360 / c432 to be exact
Thanks !
EDIT : Did I need unlocked bootloader to flash patched boot image ?
Click to expand...
Click to collapse
UP !
is there many people using Magisk on Honor 9 ? some experiences ?
Sorry for that, but same question : Did I need unlocked bootloader to use fasboot command with adb method ? It's only write : " no need root, no need custom recovery "
thanks !
I think you need unlocked bootloader to be able to flash image through fastboot.
So with the adb command you pulled the patched boot from your phone to your computer.
Now about the fastboot command ; the fact you get a '< waiting for any device >' means your phone isn't on bootloader, or isn't connected while you issue that command.
You could type :
' fastboot devices ' to test your fastboot connection while your phone is booted in bootloader aka fastboot mode.
---------- Post added at 21:31 ---------- Previous post was at 21:27 ----------
By the way l'm on honor 9 with magisk and all is working great ! (magisk 15.41 then 16.00)
Ok, thanks for your answer , I've try again and I can use fastboot command . Is no problem with patched image who is only 8mo vs 16mo for original ?
sonneper said:
Is no problem with patched image who is only 8mo vs 16mo for original ?
Click to expand...
Click to collapse
No problem
: ) Now, i know what I have to do ! Thanks !
someone have stock boot.img STF L09 8.0.0 360 / c432??
https://forum.xda-developers.com/honor-9/help/stock-boot-imf-b360-oreo-t3756967
Bla bla
oslo83 said:
By the way l'm on honor 9 with magisk and all is working great ! (magisk 15.41 then 16.00)
Click to expand...
Click to collapse
How do you did that? Do you have TWRP on your H9 or did you use fastboot way?
Thanks!
Fastboot way, but i heard twrp way was also working.

Unable to sucessfully root MIUI 10 Global

MODS: Please move this question to the HELP section - incorrectly posted. Thanks.
Hello,
I am trying to root the Global MIUI _V10.2.1.0.PECMIXM ROM using Magisk. I want my phone to remain encrypted, and having spent all day today trying to achieve this, I am turning here for help.
I have tried flashing via Fastboot and TWRP, have tried flashing Disable DMVerity (without disabling the force encryption) before, and after flashing Magisk. I hava managed to get Magisk 18 flashed and able to boot to the ROM, but when I open Magisk Manager (Installed by the flash) it updates itself and says it needs to install Magisk, proposing to download it - or patch boot img.
Every time I try to flash the downloaded zip, or try fastboot flashing the modified boot.img, the phone won't boot - it just ends up in TWRP recovery.
I have wiped data 100s of times to try to fix this, to no avail.
I have tried to boot into TWRP without flashing it, but this just hands on the TWRP flash screen every time.
Any help / tips would be appreciated.
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
msg7086 said:
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
Click to expand...
Click to collapse
Thanks for replying. Yes, following tutorials, have unlocked my bootloader and can flash ROMs, just cannot get the latest MIUI 10 Global Stable rooted, without decrypting the phone. I have managed it on the Xiaomi.eu global stable, but not with the original Stock ROM.
Has anyone succeeded?
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
t4manh198E said:
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
Click to expand...
Click to collapse
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
My post help u to install twrp or flash twrp
I do not know your mean what is flash twrp !?
Reboot to recov cook by press volumn +/- and power button
Use magisk 17.1 stanle, u can find it in my gg driver or download in miui eu 's page
---------- Post added at 05:03 AM ---------- Previous post was at 05:02 AM ----------
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
1 in 2 ways is certainly successful
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
nfadrizp said:
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
Click to expand...
Click to collapse
I rooted firsr u
nd now i am using mi mix 3 ???

Root k20/mi9t without twrp

this guide help you to root k20/mi9t by using magisk patched boot img
this guide is for users who likes to be on stock with magisks modules customisation
advantage
[no data loss in whole process]
[safety passes okk]
[install modules like dolby,viper4android after root to improve sound quality]
REQUIREMENTS
.unlocked bootloader( its one time requirement)
.magisk patched boot img
patched boot img is created using stock boot img that is different for every miui version,so create your own patched boot img according to your miui version by this easy process https://forum.xda-developers.com/mi...dian-rom-v10-3-6-0-twrp-t3958566/post80163818
just to be on safe side remove all types of lock, u can use lock after all steps completed
NOW FOLLOW THE STEPS
install latest magisk manager apk
place the downloaded magisk patched boot img to adb folder or platform tool folder whatever u call in pc
1.boot your phone into fastboot by holding power menu &volume down button togethor
2.connect your phone to pc using original cable
3.Go to adb folder & open command window by clicking shift+control+right key on the blank space (command window appear in option)
4.now check your devices by if its properly connected by typing
code: fastboot devices
if it shows attached devices then proceed
5.now flash patched img by typing command
code: fastboot flash boot magisk_patched.img
finally boot your phone to system by typing command
code: fastboot reboot
6.now open magisk manager it show some recommendation just reject that option(important steps)
7.click on install in magisk manager then select direct install recommended option
let it install &reboot [step 7 is neccessary otherwise you cant install module in magisk)
this is 100% tested method
need any help or confused comment down below before attempting this
hit THANKS BUTTON IF U LIKE
Is bootloader unlock is required because you didn't mentioned that....
if u debloat xioami apps in miui roms & do some customization with magisk module .its become quite useful rom for a while now until stable custom rom available for use
RSM10 said:
Is bootloader unlock is required because you didn't mentioned that....
Click to expand...
Click to collapse
yes bootloder unlocked is required this is basic
u can do very little customisation like debloating with locked bootloader
Thanks I knew that bl unlock is required but since you didn't mentioned it here I thought you found a way out without unlocking bl. This patched boot.img is for 10.3.6.0 What if there is new update, then we will lost root.
i will try to provide patched boot img for future updates
rkview37 said:
this guide help you to root k20 by using magisk patched boot img
this guide is for users who likes to be on stock with magisks modules customisation
advantage
[no data loss in whole process]
[safety passes okk]
[install modules like dolby,viper4android after root to improve sound quality]
REQUIREMENTS
.unlocked bootloader
.magisk patched boot img (download from link below)
.must be on miui v10.3.6.0
just to be on safe side remove all types of lock, u can use lock after all steps completed
download magisk patched boot img provided by me
https://mega.nz/#!CpUz3KwB!76fE3z30gngG282mA9DzS05AZyjG6RuQFs5-STg2kXE
now follow steps carefully
install latest magisk manager apk
place the downloaded magisk patched boot img to adb folder or platform tool folder whatever u call in pc
1.boot your phone into fastboot by holding power menu &volume down button togethor
2.connect your phone to pc using original cable
3.Go to adb folder & open command window by clicking shift+control+right key on the black space (command window appear in option)
4.now check your devices by if its properly connected by typing
code: adb devices
if it shows attached devices then proceed
5.now flash patched img by typing command
code: fastboot flash boot magisk_patched.img
finally boot your phone to system by typing command
code: fastboot reboot
6.now open magisk manager it show some recommendation just reject that option(important steps)
7.click on install in magisk manager then select direct install recommended option
let it install &reboot [steps 7 is neccessary otherwise you cant install module in magisk)
this is 100% tested method
need any help or confused comment down below before attempting this
hit THANKS BUTTON IF U LIKE
Click to expand...
Click to collapse
Thank you keep updating as and when stock updates are received.
Sent from my [device_name] using XDA-Developers Legacy app
If we receive ota update. How should we install? Will magisk stay?
Sent from my [device_name] using XDA-Developers Legacy app
Can i do magisk update regularly?
manan001 said:
If we receive ota update. How should we install? Will magisk stay?
Sent from my [device_name] using XDA-Developers Legacy app
Can i do magisk update regularly?
Click to expand...
Click to collapse
1)as we all know k20 is single partition device.so we cannot perform ota whiile preserving magisk,i will update op with all info once i figured out a way to save effort of installing all modules all over again
2)magisk can be updated regularly,no issues at all
Finally installed magisk. Thanks for the detail steps. It works well.
Sent from my [device_name] using XDA-Developers Legacy app
10.3.8 OTA update available.
Patched boot.
https://drive.google.com/folderview?id=1-3QhAjIH5JmrlZaYgsCjr92XjcUv90nN
Sent from my [device_name] using XDA-Developers Legacy app
manan001 said:
10.3.8 OTA update available.
Patched boot.
https://drive.google.com/folderview?id=1-3QhAjIH5JmrlZaYgsCjr92XjcUv90nN
Click to expand...
Click to collapse
from where did you extracted stock boot img
afaik latest 10.3.8.0 stock rom not available on any site yet
manan001 said:
10.3.8 OTA update available.
Patched boot.
Do you have the stock recovery.img ?
How to update via OTA when i am on twrp ?
Can you confirm if root working after flashing your patched boot image ?
Click to expand...
Click to collapse
rkview37 said:
from where did you extracted stock boot img
afaik latest 10.3.8.0 stock rom not available on any site yet
Click to expand...
Click to collapse
In phone update we get option to download full rom ota. I downloaded and extracted boot.img, rest you know the process.
If you like my work do hit like button.
Dear Rkview31
If the flash install of the patched image fails, can we reinstall de rom with miflash? Or, is enough to reflash by fastboot command line the original fastboot rom image?
Can any one provide stock recovery (10.3.6) please.
neek619 said:
Can any one provide stock recovery (10.3.6) please.
Click to expand...
Click to collapse
go here
download from my mega account
https://mega.nz/#!Ok8yBYaB!N9CnTLSfpvoakHiQGDyyIxDvEL0MUmUsxAQqj3nhSu0
Guys
This procedure wokrs with eea device?
mauriciocardoso said:
Guys
This procedure wokrs with eea device?
Click to expand...
Click to collapse
guide is okk but stock boot img of every rom is different so patched boot img in this thread will not work for u
rkview37 said:
go here
download from my mega account
https://mega.nz/#!Ok8yBYaB!N9CnTLSfpvoakHiQGDyyIxDvEL0MUmUsxAQqj3nhSu0
Click to expand...
Click to collapse
Thanks for the file, was able to update to 10.3.8
Patched boot image by @manan001 in the link above do not work and reboots phone in recovery mode.
Patched my own boot image works fine with 10.3.8
https://drive.google.com/file/d/1-odNizuv4HlEw92O8tl_X13aQxdFwbGe/view?usp=drivesdk

Question How to install a GSI properly?

Hello all, I've been trying to install /e/ OS GSI on my Redmi Note 11S, but that didn't go exactly well. Luckily, I managed to fix it. So before I brick this thing again, How should I install a GSI properly without bricking, and which GSI would you recommend? I am looking for something more privacy oriented. Thank you in advance
[TOOL][AUTOINSTALLER][GSI]SMINORI GSI AUTO INSTALLER FOCO M4 PRO
After i'm search many tutorial and thread about installing clean and optimal GSI and take a lot of time. So, i decided to make batch auto installer for GSI ROM for help u guys, this is easy way for installing gsi rom WITH JUST PRESS ENTER:sneaky...
forum.xda-developers.com
nothing other than that. thats it.
when it goes wrong u can easly flash full stock with miflshtool
lurchiii said:
[TOOL][AUTOINSTALLER][GSI]SMINORI GSI AUTO INSTALLER FOCO M4 PRO
After i'm search many tutorial and thread about installing clean and optimal GSI and take a lot of time. So, i decided to make batch auto installer for GSI ROM for help u guys, this is easy way for installing gsi rom WITH JUST PRESS ENTER:sneaky...
forum.xda-developers.com
nothing other than that. thats it.
when it goes wrong u can easly flash full stock with miflshtool
Click to expand...
Click to collapse
Thank you
Is there some sort of Linux alternative?
And which GSI would you recommend?
kritomas said:
Thank you
Is there some sort of Linux alternative?
And which GSI would you recommend?
Click to expand...
Click to collapse
I have tried Evolution X A13 & Pixel Experience Plus A13 & CRDROID A12 and on all of them I had issues with Wifi, bluetooth, thethering - non of them worked so I gave up and went back to miui
1. adb reboot bootloader
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
3. fastboot reboot fastboot (because gsi must be flashed in fastbootd )
4. fastboot getvar is-userspace
5. fastboot erase system
6. fastboot delete-logical-partition product_a
7. fastboot flash system YOUR_GSI_ROM.img (system.img)
8. fastboot reboot recovery
9. (in recovery) wipe data
10. (in recovery) reboot to system
i flashed yesterday Arrow OS lite A12 it has several fixes for most common problems on board and it worked very well and smooth.
on telegram you can found a magiskmodul fix for auto-variable Hz and a magisk modul for disable hw-overlays consistent. (cauz after reboot it turn back on automaticly)
BUT gaming performance is horrible and good kernel tweaks are over my level
Had someone tried any of these GSI images without having wifi / bluetooth issues?
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
..... flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
Click to expand...
Click to collapse
Where should I take the vbmeta.img for my phone?
shady9090 said:
Where should I take the vbmeta.img for my phone?
Click to expand...
Click to collapse
Download the Fastboot Firmware that match the Firmware on your phone from here: https://forum.xda-developers.com/t/...dmi-note-11s-4g-poco-m4-pro-4g-fleur.4428655/
Extract it with the file and in the images folder is the vbmeta.
I have this weird issue on every GSIs where the status bar isn't aligned with the camera. Does anyone know how I can fix that?
Dio Off-Brando said:
I have this weird issue on every GSIs where the status bar isn't aligned with the camera. Does anyone know how I can fix that?
Click to expand...
Click to collapse
In the Developer Options is a fix for that. But idk how the exactly Name was for it.
lurchiii said:
1. adb reboot bootloader
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
3. fastboot reboot fastboot (because gsi must be flashed in fastbootd )
4. fastboot getvar is-userspace
5. fastboot erase system
6. fastboot delete-logical-partition product_a
7. fastboot flash system YOUR_GSI_ROM.img (system.img)
8. fastboot reboot recovery
9. (in recovery) wipe data
10. (in recovery) reboot to system
i flashed yesterday Arrow OS lite A12 it has several fixes for most common problems on board and it worked very well and smooth.
on telegram you can found a magiskmodul fix for auto-variable Hz and a magisk modul for disable hw-overlays consistent. (cauz after reboot it turn back on automaticly)
BUT gaming performance is horrible and good kernel tweaks are over my level
Click to expand...
Click to collapse
So from Linux with platform-tool installed and by giving the mentioned commands I can flash Gsi rom Pixel Experience right???
fastboot delete-logical-partition product_a??? no b???
yes you can flash it from windows or from linux. they are the same commands..
and yes only a
GitHub - VegaBobo/DSU-Sideloader: A simple app made to help users easily install GSIs via DSU's Android feature.
A simple app made to help users easily install GSIs via DSU's Android feature. - GitHub - VegaBobo/DSU-Sideloader: A simple app made to help users easily install GSIs via DSU's Android feat...
github.com

How To Guide [GUIDE][ROOT][MAGISK] How to Root ACE 2/11R with Magisk without TWRP

Hello everyone hope you are all keeping well.
Since I believe that many of you don't know about this, I've decided to share the steps I've done in order to root the OP 11R ( ACE 2 )
I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!
1 - Unlock the bootloader (if you haven't done it already...beware that this will erase all of your user data). To do so, you must:
Enable developer options
Enable the "OEM unlocking" option
Enable USB debugging
Have both adb and fastboot, from SDK Platform Tools available on your PC
Connect your phone to your PC using the USB cable and run the following commands:
adb devices
adb reboot bootloader
(so your phone will reboot into fastboot mode)
fastboot flashing unlock
(device should now unlock)
fastboot reboot
(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)
2 - Download OP 11R stock boot.img that you may find later on this post, that matches your current build.
Copy the boot.img to your devices internal memory
Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)
Indian Boot.img A_0.8 - download
3 - Download latest Magisk Manager from HERE and install it on your phone
4 - Open Magisk Manager App and press:
Install
Select and Patch a File
Browse to the path where you saved stock boot.img and select it
Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img
5 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)
6 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)
adb reboot bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
7 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!
8 - Enjoy!
All credits goes to topjohnwu and his incredible work with Magisk.
Why title says NORD 2T?
firoz3321 said:
Why title says NORD 2T?
Click to expand...
Click to collapse
MB ... typo
Thank you for detailed steps.
Is there any benefit with KernelSU over this method ?
I always used Magisk on OP8, but recently saw an article for OP11 with Kernel SU.
Also is there MSM tool support to recover softbriked device ?
firoz3321 said:
Thank you for detailed steps.
Is there any benefit with KernelSU over this method ?
I always used Magisk on OP8, but recently saw an article for OP11 with Kernel SU.
Also is there MSM tool support to recover softbriked device ?
Click to expand...
Click to collapse
Sorry but there is no msm tool available for new OnePlus devices. + You can use Fastboot enhance tool from github to recover softbrick , magisk is always recommended for rooting because of ease of steps and simple to use
Hello, thanks for the detailed instructions. Today I updated to A. 10, and unfortunately lost my root access. Without the root cannot extract the boot image. If you're already updated and have a backup of A. 10 boot, can you please share?
saifsohel said:
Hello, thanks for the detailed instructions. Today I updated to A. 10, and unfortunately lost my root access. Without the root cannot extract the boot image. If you're already updated and have a backup of A. 10 boot, can you please share?
Click to expand...
Click to collapse
i didn't got the update yet ... + oxygen updater also showing A.08. i will update this post soon as I got update
shiki_senpai said:
i didn't got the update yet ... + oxygen updater also showing A.08. i will update this post soon as I got update
Click to expand...
Click to collapse
Then remember to take a backup of the boot before rebooting. I messed up big time.
Thanks for the detailed information man. Can I know if bootloader unlock decreases widevine L1 to L3? As this was case with my OP6

Categories

Resources