Mi Unlock status stuck, keeps saying "Connect to network and try again" while net is - Xiaomi Redmi 3 Questions & Answers

Mi Unlock status stuck, keeps saying "Connect to network and try again" while net is
I'm trying to activate Mi unlock status on my old redmi3 so I can unlock the bootloader using their tool, but every time I press the button it 1st says "Preparing to add account and device.." then near instantly " Connect to network and try again" (and if I try with no net then the 1st message doesn't show). The phone is tied to the Mi account, I know for sure since now every time I reinstall the ROMs it tells me is tied and I need to enter the Mi account password, its only Mi unlock status the doesn't and keeps the Mi unlocker from unlocking my bootloader.
Backstory:
So I have a redmi3 (ido) with android 5.1.1 bought in 2016, finally decided to try and update my phone from the ****ty vendor ROM (MIUI 6.9...smt) that had the updater bugged (the app couldn't also connect to net to check) and Mi unlock status missing, flashed MIUI 9.6.2.0 from the official site using their tool which fixed the updater (but now I can't downgrade) and now has Mi unlock but as I said it doesn't work.
What I tried so far:
-Log off Mi account and log in through the Mi unlock status (also tried using phone number as id)
-Change location to China or Indonesia then try again (tried both)
-Make sure the phone is the only device tied to the Mi account
-Enable "Find device" then use it to locate the phone (it was very accurate)
-try while having only Wi-fi or while having only mobile data on (tried both)
Here is some more info of the phone:
MIUI version: MIUI Global | Stable 9.6.2.0(LAIMIFD) (can also flash 9.6.1.0)
Android version: 5.1.1 LMY47V
Android security patch level: 2017-01-01
Baseband version: FAAANUZM-1.56482.1.63385.1_V013
Kernel version: 3.10.49.perf-g13b30f1
It also lets me enter in fastboot and EDL mode.

I had the same problem recently, after many tries I succeeded unlock bootloader.
Step by step guide:
1. Download xiaomitool and install.
2. Reboot phone to recovery.
3. In recovery menu choose Mi assistant, and connect to PC through USB.
4. Run xiaomitool and choose "My device is bricked and i want to unbrick it" and continue.
5. Xiaomitool will download chinese rom, this may take a while.
6. When its finish, in xiaomitool you can see message to set usb debugging, NOW you must power off phone, and enter to recovery again and select Mi assistant, like in step 2, and connect phone to pc throught USB, if you dont see this message xiaomitool should run next step.
7. Now Xiaomitool install chines rom, after reboot log into you account, unblock developer mode and click on mi unlock status when your wi fi is disable and mobile data is on.
9. Now unlock phone with mi Unlock.
10. AND DONE!!!!!

Aalard_ said:
I had the same problem recently, after many tries I succeeded unlock bootloader.
Step by step guide:
1. Download xiaomitool and install.
2. Reboot phone to recovery.
3. In recovery menu choose Mi assistant, and connect to PC through USB.
4. Run xiaomitool and choose "My device is bricked and i want to unbrick it" and continue.
5. Xiaomitool will download chinese rom, this may take a while.
6. When its finish, in xiaomitool you can see message to set usb debugging, NOW you must power off phone, and enter to recovery again and select Mi assistant, like in step 2, and connect phone to pc throught USB, if you dont see this message xiaomitool should run next step.
7. Now Xiaomitool install chines rom, after reboot log into you account, unblock developer mode and click on mi unlock status when your wi fi is disable and mobile data is on.
9. Now unlock phone with mi Unlock.
10. AND DONE!!!!!
Click to expand...
Click to collapse
Buddy I'm the one you talked with on the Mi community forum so you already helped me : D
Only reason these are still up is that I couldn't find a delete button here : )) . Appreciate trying to help others in our similar situation tho

I am facing the same issue. The version of the ROM is exactly the same as the InowHateXiaomi's.
However, the method above doesn't seem to work. The XiaoMiTool V2 doesn't download the Chinese ROM.
I tried whatnot but cannot add the device to my account so that I can unlock it.

have tried this method..it tries to download the ROM but failed. dunno what wrong with my devices anymore.

Have you tried to
- install adb and fastboot;
- enter fastboot mode and fastboot oem unlock to unlock bootloader first?

it is not working, toker error or something...

wenyendev said:
Have you tried to
- install adb and fastboot;
- enter fastboot mode and fastboot oem unlock to unlock bootloader first?
Click to expand...
Click to collapse
I have latest 12 miui poco f1 with all updates done ok , CE (for EU) and tried many thing from the net - but nothing is working - this error (token error in fastbook when want to fastoot oem unlock) and unlock MI status - connect.. err try again..... cant unlock this phone,
even did accident the phone reset to factory defaults by fastboot lock and then window appeared to enter xiaomi account pass , thx god i had backups in google etc.
anybody help???

Same here, where to report this problem?

change Your region to asia close to china or china, and then register once again using vpn set as You were in asia - then it should be ok, no waiting for old phones, I noticed they are blocking central EU or even west but asia is treated differently

i use this method but still dont solve anything, its say missing coockies or anything

Related

Error while unlocking bootloader

I have to unlock my bootloader of redmi note 3 i got permission from xiaomi but when i used mi unlock tool to unlock bootloader but it is showing verific
ation error
It's a common error you might face. The solution is to enable oem unlock in developer options and USB debugging and go to i.mi.com and login in with your account to make sure that the device is shown online. Then go to fastboot and try unlocking. If it doesn't work, wait for some 3 days and try again.
Mine worked after 3 days.
this method worked for me (kenzo) when i was on V8.0.6.0.LHOMIDG MIUI8.
1- you need to switch from global stable to global developer rom, download the latest global developer rom on android lollipop(5.1).
unfortunately xda won't let me include links,so google this : miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
2- after downloading the rom,rename the file name to Update.zip then copy to internal storage(in downloaded_rom folder).
3- open updater app, select choose update package, go to downloaded_rom folder and select Update.zip. It will verify your rom and install it.
4- download the latest global developer rom from en miui , repeat the steps 2 and 3.
5- sign in to your mi account on your device(enable find device),also on i.mi.com(to check your device). enable developer options, then enable OEM unlocking and USB debugging.
also check your status in developer options>unlock bootloader(I forgot the exact name of this section)
6- download the latest version of MIFlashUnlock tool and log into your account
7- turn off your device and go to fastboot (press and hold volume - and power button at the same time), connect your device to your PC, click unlock(on MIFlashUnlock tool), after your bootloader successfully unlocked, click on reboot.
also there is no need to wait after receiving your permission, it worked for me after a few hours of searching for solutions and if I knew this method in the first place, I don't think there would be a problem right after receiving my permission to unlock the bootloader.

[Unlocking Bootloader] All Possible Methods [3s/Prime]

=======================
UNLOCK BOOTLOADER
=======================
NOTE: To be on safe side, Backup your data before doing any experiment. I will not responsible if you damage your phone. So do this at your own risk.
Firstly read Requirement section & Instructions 1,2,3 before trying or downloading anything.
Before unlocking bootloader, YOU NEED PERMISSION OF UNLOCKING BOOTLOADER IN YOUR ACCOUNT.
follow below steps carefully.
**************
REQUIREMENT:
*****************
1. Redmi 3s/3s Prime Running On MIUI 7/8
2. A PC With Windows xp/7/8/8.1/10 installed
3. USB Cable
4. ADB Drivers [ http://forum.xda-developers.com/showthread.php?t=2588979 ]
5. MiFlashUnlock Tool [ https://drive.google.com/uc?id=0B95YT61gv-breXVPZl9FZ3hkdDQ&export=download ]
6. Qualcomm Driver [ http://cloud.xiaomitips.com/utility/Qualcomm_Drivers_QDLoader.zip ]
7. Mi PC Suite [ http://bigota.d.miui.com/MiFlash/MiSetup2.2.0.7032_2717.exe ]
8. Mi Flash Tool [ http://xiaomiflashtool.com/wp-content/uploads/MiFlash20160830.zip ]
9. Lots of Patience.
***************************************************
INSTRUCTIONS 1 (Getting Unlocking Permission)
***************************************************
Before unlocking bootloader, you need to take permission from Xiaomi.
SKIP these steps and Jump to Instruction 2 if you already have unlocking permission in your mi account.
1. open this link[ http://en.miui.com/unlock ] and click on "Unlock Now" button.
2. Log in with your mi account.
3. Fill all details. While filling details you will find a text field "Please input your unlocking reason"
4. In this text field, enter these reasons: "I understand the risks of unlocking bootloader. I want to flash the ROM to fix the bootloop. I request you to grant me the permissions for unlocking."
5. Click on "Apply Now"
6. Verify phone via OTP. After that, your Account is verified and it says Processing and you will receive a SMS within 10 days.
7. Afer 2-3 days you will get a SMS Like "You have been granted for permissions To unlock ur device ..."
**********************************************
INSTRUCTIONS 2 (Changing Phone Setting)
**********************************************
1. Now you are having unlocking permission on your phone. So login into the Mi account in your phone with the same id on which you got the unlocking permission.
2. Now remove Fingerprint and Pattern Lock.
3. On your Redmi 3s/3s Prime, go to Settings > About Phone > Tap on "MIUI Version" 7 times. This will enable Developer Options.
3. Now go to Settings > Developer options > enable "USB debugging" and "OEM unlocking"
4. Open the "MI Account" app on your phone and Login with the Phone number or id that you used to get the unlocking Permission.
***********************************************
INSTRUCTIONS 3 (Downloading & Installing)
***********************************************
All Downloading links are given in "Requirement" section. Install one by one in sequential order on your laptop/PC.
1. Disable Driver Signature Enforcement in your system [ http://en.miui.com/thread-237673-1-1.html ]
2. Download & Install Mi PC Suite into your laptop/PC
3. Download & Install Mi Flash Tool.
4. Download ADB driver and install it.
5. Download MiFlashUnlock Tool and extract to desktop. It will be easy to find & use from the desktop.
6. Download and install Qualcomm Driver. (To Install Qualcomm Driver, you have to extract the downloaded "Qualcomm_Drivers_QDLoader.zip" file and open the extracted folder. Within some folder u will find the file "qcser.inf" Right click on it and click install. )
7. Restart your PC/Laptop.
********************************************
INSTRUCTIONS 4 (Unlocking Bootloader)
********************************************
METHOD 1
************
1. On your computer, open MiFlashUnlock folder which you have extract in the desktop.
2. Right click on MiFlashUnlock.exe and select "Run it as administrator" & click on 'Yes'
3. Login into the unlocking tool on PC with the same Mi account.
4. Reboot your phone into Bootloader mode. To do that, simply turn off your device, press & hold Power button + Volume down buttons at the same time. Hold until you see Mi Bunny Fastboot logo.
5. Now connect your phone to the computer using its USB cable.
6. Once your phone is connected, the Unlock button will become active.
7. Simply click on the Unlock button to start the process. The unlock process will take about 10 – 15 seconds to complete.
8. You will see the message in green color "Unlocking Successfully" then you are the luckiest guy in this world who unlocked the bootloader in an easiest way.
9. Follow Method 2 if you stuck at 50%
METHOD 2
************
1. Go to http://en.miui.com/forum.php
2. Sign in with your account which was used to get unlocked permission.
3. Now open setting of your profile and then Personal Info
4. Here at the end of the page you will find the Device name.
5. Change the device name to Redmi 3s or Redmi 3s prime according to the phone which you have.
6. Save the setting and close the window.
7. Open the MI unlock tool in your PC and login into your Mi account with Phone Number (user id) and try to unlock now.
8. Finally, hit the Unlock button.
9. Now your bootloader will be unlocked, If you still do not get success and stuck at 50% then follow next method
METHOD 3
************
1. In your phone, Add your Mi Account in "Settings > Accounts"
If you already have a Mi Account, skip this step.
2.Make sure "Find device" is turned on in the Mi Account app. If you don't know how to turn on find device option then follow this tutorial [ http://en.miui.com/thread-329633-1-1.html ] and move to step 3.
3. Now go to your PC and open the https://i.mi.com and sign in using the same Mi Account (use your mobile phone number as user id)
4. Once you logged in, you’ll be able to see a list of connected devices. If you will see some of your Old Xiaomi phone in the list. Delete them all and make sure your current phone is online. If not then, locate your phone by clicking on "Find Device"
5. Now wait for 1 day.
6. On the next day, reboot your phone into Fastboot mode and open the MI unlock tool in your PC and login into your Mi account with Phone Number (user id) and try to unlock now.
7. Finally, hit the Unlock button.
11. Now your bootloader will be unlocked, If you still do not get success and stuck at 50% then follow next method
METHOD 4
************
1. Remove your Mi account from your phone. Also, delete account data.
2. Now again login into your account and turn off find device option
3. Open unlock tool by Right click on MiFlashUnlock.exe and select "Run it as administrator"
4. Login into the unlocking tool on PC with the same Mi account.
5. Don't connect the phone to Computer.
6. Once you Logged in, the Unlock button will become active.
7. Now Disconnect/turn off your internet connection from PC for 5 min
8. It may show "unknown error 501"
9. Now again turn ON the internet connection. And connect your phone to PC in Fastboot mode.
10. Click on Unlock button.
11. Now your bootloader will be unlocked
12. If you still do not get success and stuck at 50% then follow METHOD 4
METHOD 5
************
1. Open this link [ http://en.miui.com/download-303.html ] and download the Developer ROM (size: 1.4gb)
2. Paste the downloaded ROM into the internal memory of your phone.
3. Open Updater app and go to option.
4. Select "Choose Update Package" and select the developer ROM which you have pasted into the internal memory. (Before doing this battery should be greater than 30% charged)
5. Now your phone will reboot and installation takes place. It will take around 20 min. or more.
6. Now follow the "steps 2-7 of METHOD 1 "
7. In this method, you will definitely get success.
METHOD 6
************
1. Download this Latest MiUnlock flash tool v1.1.1111 [ https://drive.google.com/uc?id=0B95YT61gv-brdkxiM09mTzZya0E&export=download ]
2. In place of an old unlocking flash tool, use this latest MiUnlock flash tool to unlock by following above methods.
3. You may get success but chances are less.
METHOD 7
************
If you don't get success in any method then try to change the version of MiUnlock Tool and again try.
Still, if you stuck at 50% then wait for some days (7-8 days) and try again above methods
If you like it then click on "THANKS" button
and Cheers if you UNLOCKED your bootloader successfully.
For More updates related to Rooting, Flashing, Unlocking, Bootloop and other such stuff.
JOIN our Facebook group :good:
https://www.facebook.com/groups/redmi3s
Telegram Group :good:
telegram.me/Redmi3s_prime
Good Information. But MiFlashUnlock tool link is broken. Getting 404 error.
Great tutorial.!! I think disable driver signature is for windows 10 64 bit. Is it possible to do this method in windows 7 32bit?
If anybody has success with windows 7 please reply
Thanks
arceuss said:
Good Information. But MiFlashUnlock tool link is broken. Getting 404 error.
Click to expand...
Click to collapse
Thanks for informing. Now the link is updated and working fine.
P€πtex4869 said:
Great tutorial.!! I think disable driver signature is for windows 10 64 bit. Is it possible to do this method in windows 7 32bit?
If anybody has success with windows 7 please reply
Thanks
Click to expand...
Click to collapse
In the link, they have provided the method for all windows 7/8/8.1/10 separately.
Ohk. Thanks
Thanks
m4mohit said:
Thanks for informing. Now the link is updated and working fine.
Click to expand...
Click to collapse
Thank You.
Entering method 4
I have downloaded latest developer rom,
moved it to phone's internal memory,
But when I tried to update with updater app, it throws an error that I am permitted to update to other stable update only.
For other methods, I am getting error at 50% "Couldn't verify device - Current account is different from the account info on the device". The phone is also not booting to EDL mode. It's just booting to android instead.
arceuss said:
Thank You.
Entering method 4
I have downloaded latest developer rom,
moved it to phone's internal memory,
But when I tried to update with updater app, it throws an error that I am permitted to update to other stable update only.
For other methods, I am getting error at 50% "Couldn't verify device - Current account is different from the account info on the device". The phone is also not booting to EDL mode. It's just booting to android instead.
Click to expand...
Click to collapse
Means you have to manually flash the Dev. ROM
follow the instructions from this link
http://xiaomitips.com/guide/fastboot-bootloop-hardbrick-softbrick/
m4mohit said:
Means you have to manually flash the Dev. ROM
follow the instructions from this link
http://xiaomitips.com/guide/fastboot-bootloop-hardbrick-softbrick/
Click to expand...
Click to collapse
Thanks.
But as you have said on your other thread the method in the link follows fastboot mode which is for unlocked Bootloader only. My phone's Bootloader is still locked. And I am unable to enter EDL mode also. Phone reboots to android when I try to enter download mode.
arceuss said:
Thanks.
But as you have said on your other thread the method in the link follows fastboot mode which is for unlocked Bootloader only. My phone's Bootloader is still locked. And I am unable to enter EDL mode also. Phone reboots to android when I try to enter download mode.
Click to expand...
Click to collapse
Without edl mode with locked bootloader it is not possible to flash. So there are various methods to open edl mode. Search on google you will get it.
i have sucessfully unlocked
pavan.sampara said:
i have sucessfully unlocked
Click to expand...
Click to collapse
How??
by using miunlock tool
pavan.sampara said:
by using miunlock tool
Click to expand...
Click to collapse
Which method did you use. Im still stuck at 50%
wait 5-7 days after receiving conformation msg. enable oem unlocking in developers option
pavan.sampara said:
wait 5-7 days after receiving conformation msg. enable oem unlocking in developers option
Click to expand...
Click to collapse
Yup.. I waited a week and done that
---------- Post added at 08:30 AM ---------- Previous post was at 07:49 AM ----------
Still not working
good job!
excellent guide
big thx !
do you turn off drivers signature enforcement in your pc
@m4mohit , maybe you should add, that logging into miui accound and activate device track can help at unlocking also. in fact this was how it finally worked for me. despite the other prerequisites
im using windows 7 32bit so there is no driver signature check i guess

Stuck in Mi Recovery 3.0 with a stock device

Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
CiDsTaR said:
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
Click to expand...
Click to collapse
If your device is Redmi Note 5 from other country but India then it´s Whyred and this Forum is for Redmi 5 Plus/Redmi Note 5 (only India) that is Vince.
In the case I´m right and your device is Whyred (two rear cameras is a simple way to note it) then as far as I know you will need an EDL authorized account to flash a rom through MiFlash Tool.
Other tool that you can use is XiaomiFlash Tool by Francesco Tescari through Mi-Recovery but you will need too have enable USB debugging (maybe you have) but the same way you can flash a rom also you´ll lose all your data.
Adb shell works only in rooted devices, you can´t backup nothing in this state and fastboot mode is limited to just few commands like list device/reboot devices and nothing more in locked bootloaders.
In this scenario you have two things in order to solve this issue:
1- Highly probable loosing all your data.
- Doing format data through recovery and try to boot (data lost for sure)
- Flashing a rom through recovery with the mentioned tool (99% data lost probabilities)
- Flashing a rom through EDL; if you have Vince you can do it but if you have Whyred I don´t think so (if you choose second option "Flash without erase userdata" in MiFlash Tool I guess your data will be preserved)
2- If you enabled before USB debugging and binded your Mi account with device wait the time to unlock bootloader and maybe booting first of all in TWRP you can recover some data from your device, if you unlocked but first of all you boot on system for sure all your data will gone.
So what happened? Were you able to solve it? PLs share if you were...
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
gldvs007 said:
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
Click to expand...
Click to collapse
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
RehanSiddiqui said:
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
Click to expand...
Click to collapse
BIG THANKSS, THIS HELP ME TOO
In my case my Redmi Note 7 MIUI 11.xx and had a update notification
im accidenly hold my power button my, and ALWAYS go to MI-Recovery 3.0 after several reboot
Im downloading that app and updating that app,
And copy the translate file from China to English (my pc WINDOWS 10 64x)
i chose "Connect to Mi Assistant" in phone connect to my pc and open the app, that can see my current ROM (MIUI 11.xx) can be update to "MIUI 12.xx" ,im flashing(updating) with "LEFT" option
that say "CAN SAVE UR SEVERAL FILES" than option RIGHT(DELETE ALL FILES) i guess i dont much remember
Im flashing(updating) with hope my files still in there,
The app start downloading the ROM and instaling to my phone 0% to 100%
My phone reboot and had notify "The system has been destroy"
After restarting several time, Im lossing hope on my phone,
Im trying hold my -Volume button while rebooting, then my phone booting on MIUI 12 in several minute
And "EVERYTHING ITS FINE" i have my all files,app,photos, just like my regular phone but have new MIUI 12 update Introduce changelog
I just wanna share my experience
THANK YOU A LOT
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Mi app recovery will not work on older phones like vince i suggest flashing through test point by removing the back cover and reconnect both points
mccholai said:
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Click to expand...
Click to collapse
it stuck at 99%
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
Just remove SD card & SIM tray from phone and restart. I work for me. try at our end. Don't flash or connect anything.
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
how u solved your problem , i am stuck in same stage .. help please
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
harsimran27 said:
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
Click to expand...
Click to collapse
were any files deleted? and do you perhaps know if it would work on redmi note 7?
hello guys just look this video i solved it
Hi all,.
I also faced the same issue my redmi note 5 Pro which was on I believe MIUI 10 because it was never updated from the day it was purchased got stuck in bootloop and not getting ahead after recovery mode no matter how much time you reboot it was all working fine but some apps were updating such as youtube when this incident occurred I tried every solution like pressing keys pressing all three keys simultaneously or ADB method but none could work since the phone was locked also there was no USB debugging so adb method wouldn't work to also if an if ADB connected I couldn't flash because it will remove the data, in recovery mod you can see in option connect with MI Assistant but the Indian English version shown no connection so found one youtube video (channel name -" Ach Sharif ", video link-
which helped to install chinese version and and solved login issues I used Google translate translate to read the Chinese characters and understand what is going on I connected the device intending to take a backup backup but as no option was available I had to click on flash device so it downloaded upgraded recovery rom and automatically flash to MIUI 11 but still same problem then again I connected and upgraded to MIUI 12 and the phone was able to boot so the phone finally got fixed all data and all apps were intact and working as originally also all data of WhatsApp chats etc remained even the open apps at the time when problem happened were still present.
I believe guys this is the only solution to the problem because while flashing it replaces the recovery module of the rom which was corrupted earlier in my case when MIUi 12 installed not 11 I feel that it replaced recovery module due to update and it was able to work so please try once and I hope you get your files back, now lesson learned please do regular backups to live worry free life otherwise we will be spending time and energy here only.
I believe ADB methods or other methods won't work because they will flash and you won't be able to get data only flashing through recovery ROM not fastboot rom just like update package will be able to solve your problem if it is a software problem it will be can be fixed fixed this way only and saving data if it's a hardware problem such as power of all volume buttons are stucked you just get change and everything will be fine it happened in my other phone redmi Y2 so from speaking from experience thats all as I was going through trouble these things really help me so I thought to spend time in creating this guide please follow and I hope it will be solved.
You must open back cover( easily you can do it by hair dryer) and disconnect and connect again the battery, it will fix

Error, find device manager currpted, your device is unsafe now. Miui 11?

Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
ismail697 said:
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
Click to expand...
Click to collapse
try installing the rom zip
Enviado desde mi iPhone utilizando Tapatalk
ismail697 said:
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
Click to expand...
Click to collapse
Hi!
Something very similar happened to me a few days ago. After unsuccessfully trying to install Havoc 3.0 rom (Android 10) on my device, I decided to come back to Miui 11. Then I found this weird message, but instead of "device manager" I think in my case it said "...storage is corrupted...". I was lucky not to lock the bootloader. The solution was flashing via fastboot an old Miui rom, a Marshmallow one. Thay solved the problem. Keep on trying to unlock the bootloader. Good luck!
I had same problem and found an easy solution! Your presist partition is corrupt...do the following:
1. fastboot flash latest MIUI 11 firmware with miflash
-you will see the error message...ignore it for now
-if you are on latest MIUI 11 then ignore step 1
2. turn OFF the phone and boot into fastboot mode (volume down + power)
3. Connect phone to pc
4. download atached archive and unpack to a folder on your pc
-in folder you will see a file named "RedMi Note 4 & 4X EDL Mode"...with phone in fastboot mode and connected run that file...screen on phone will turn off and red light will blink
-now you are in "edl" mode
5. Open miflash tool and select folder that you unpacked from my archive...select flash all and flash your phone
6. After few seconds miflash will show flash done...you are good to go
Phone will turn off...disconnect it and press power button for about 8-10 seconds and phone will boot...done...no more error :good::fingers-crossed:
Hope this helped
Saky22 said:
I had same problem and found an easy solution! Your presist partition is corrupt...do the following:
1. fastboot flash latest MIUI 11 firmware with miflash
-you will see the error message...ignore it for now
-if you are on latest MIUI 11 then ignore step 1
2. turn OFF the phone and boot into fastboot mode (volume down + power)
3. Connect phone to pc
4. download atached archive and unpack to a folder on your pc
-in folder you will see a file named "RedMi Note 4 & 4X EDL Mode"...with phone in fastboot mode and connected run that file...screen on phone will turn off and red light will blink
-now you are in "edl" mode
5. Open miflash tool and select folder that you unpacked from my archive...select flash all and flash your phone
6. After few seconds miflash will show flash done...you are good to go
Phone will turn off...disconnect it and press power button for about 8-10 seconds and phone will boot...done...no more error :good::fingers-crossed:
Hope this helped
Click to expand...
Click to collapse
Will it work for locked bootloader?

Unlocking the bootloader on Xiaomi Poco C40

Greetings. I've had a very painful week trying to unlock the bootloader of my Poco C40, I waited a week for the wait to finish so I can unlock it and when it was done I thought it was going to be smooth sailing from now on.
However, for some reason whenever I try to unlock it, it goes up to 50% and gets an error saying it couldn't verify my device and get info, and that I should connect it again.
I didn't know what it meant by connect again, so I tried reconnecting the USB cable (different ports, cables, etc...), re-adding my account for unlocking. Yet, neither of those options seem to have fixed the problem.
If you have some advice that you could give and it would be greatly appreciated.
Hi MitsuhashiIcy, Soory to say but Mi unlock works only with Qualcomm and Mediatek socs. And you have CHIPSET JLQ JR510 which is worse than Mediatek.
But still you can give try. I think by following the above instruction you can unlock the Bootloader :-
DOWNLOAD Xiaomi Poco C40 USB Drivers.
DOWNLOAD Mi Unlock Tool.
DOWNLOAD Xiaomi Poco C40 fastboot drivers.
FIRST DOWNLOAD AND INSTALL AVOBE FILES FIRST.
Step 1: Enable The Developer Option and OEM Unlock​Step 2: Time To Link Your Xiaomi Poco C40 with Mi Account​Step 3: Final Step: Unlocking Bootloader on Xiaomi Poco C40​ # Boot Xiaomi Poco C40 into Fastboot mode.
# Grab the original cable of your smartphone and then connect it to your PC while in fastboot mode.
# If you have downloaded the Mi Unlock tool from the above pre-requisites section, then simply just extract the zip file and then run the miflash_unlock.exe file.
# Also, proceed with logging into your Mi Account on the unlock tool with the right credentials.
# When you get successfully logged in to your Mi Account, the tool will begin to verify whether your phone is eligible for unlocking bootloader.
# After your phone gets verified, you will see the status on the tool displaying "Phone Connected".
# Now, just click on the "Unlock" button available on the tool interface to start the unlocking bootloader process.
# Once, you click the button, It will prompt a warning message, where you just need to ignore and click on the "Unlock Anyway" button.
# When the process gets complete, you will be served with a message displaying "Unlocked Successfully".
# At last, click on the button, so that your phone boots up in the unlocked bootloader state.
That's it... YOU CAN GIVE A TRY.
NOAKNAVAS said:
Hi MitsuhashiIcy, Soory to say but Mi unlock works only with Qualcomm and Mediatek socs. And you have CHIPSET JLQ JR510 which is worse than Mediatek.
But still you can give try. I think by following the above instruction you can unlock the Bootloader :-
DOWNLOAD Xiaomi Poco C40 USB Drivers.
DOWNLOAD Mi Unlock Tool.
DOWNLOAD Xiaomi Poco C40 fastboot drivers.
FIRST DOWNLOAD AND INSTALL AVOBE FILES FIRST.
Step 1: Enable The Developer Option and OEM Unlock​Step 2: Time To Link Your Xiaomi Poco C40 with Mi Account​Step 3: Final Step: Unlocking Bootloader on Xiaomi Poco C40​ # Boot Xiaomi Poco C40 into Fastboot mode.
# Grab the original cable of your smartphone and then connect it to your PC while in fastboot mode.
# If you have downloaded the Mi Unlock tool from the above pre-requisites section, then simply just extract the zip file and then run the miflash_unlock.exe file.
# Also, proceed with logging into your Mi Account on the unlock tool with the right credentials.
# When you get successfully logged in to your Mi Account, the tool will begin to verify whether your phone is eligible for unlocking bootloader.
# After your phone gets verified, you will see the status on the tool displaying "Phone Connected".
# Now, just click on the "Unlock" button available on the tool interface to start the unlocking bootloader process.
# Once, you click the button, It will prompt a warning message, where you just need to ignore and click on the "Unlock Anyway" button.
# When the process gets complete, you will be served with a message displaying "Unlocked Successfully".
# At last, click on the button, so that your phone boots up in the unlocked bootloader state.
That's it... YOU CAN GIVE A TRY.
Click to expand...
Click to collapse
Thank you for the reply, I'm sorry I couldn't reply earlier as it was already late for me.
I have tried installing the adb drivers first through the adb-setup exe file, however, when I try to install it, it says that access was denied.
I decided to ignore it for now and go to the Mi Unlock tool that you've linked, I noticed it was a really old version but nonetheless I went with it. The first thing I noticed was how slow the sign in page was, I had to log in via qr scanner through another device because I couldn't manually put in my credentials.
After that I managed to sign in, but instead of directly taking me to the screen where it tells me to boot my phone to fastboot mode and connect it to my pc and all that stuff, it took me to this screen showing my phone number and email (which I've censored). I haven't found a way around this screen to get me to where I want to be.
Suppose I'm on my own once again.
I seem to have managed to unlock the bootloader for my Poco C40 with the official Mi Unlock tool using version 7.6.602.42, so if anyone wants to know whether or not it is possible to unlock Poco C40's bootloader with Mi Unlock, now you know.

Categories

Resources