I cant find a good case for ROG 3 on flipkart of Amazon. Which case are you guys using? where did you buy it from??
I am using Lighting Armor case as I need to use the air trigger. If you do not care for the function of air triggers (dual & slide), can get IMAK case from aliexpress.
I'm also using the lighting armour , I like it ok it drains power but I still like it
I am using the average tpu case that is available for rog 3, i had to make cut out for the side mounted type c ports though
I'm using this: https://www.aliexpress.com/item/4001345047036.html?spm=a2g0s.9042311.0.0.5d6e4c4d4DwYCq
It's not perfect, but provides enough all around protection, the cutouts are in place.
The included tempered glass screen protector is of good quality, but the black border covers a few pixels on the sides.
It's pretty cheap, I can recommend buying it to protect your ROG Phone 3 - as I said, it's not perfect, but good enough.
Using this one with a tempered glass in the front and a silicon film in the back
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Used to use the lighting armor case until the slippery uncovered aluminium side caused me to drop the phone yesterday, now the phone has a dent on the top right corner of the frame. Lighting armor has the best look of all the cases out there. Now using Zshow case which should prevent it from hitting the screen flat down if I ever drop it again. I'm lucky the phone didn't fall face down with the lighting armor case which would have guaranteed a cracked screen.
I have the imak tpu case too but it cause the tempered glass to lift.
Besides the tempered glass being lifted issue, what's your experience/ feedback regarding your IMAK TPU case (is it with extra corner protection)?
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
I'm getting the hydrogel film screen protectors - Hoping that screen lift is not an issue.....
What's your experience or opinion regarding the general damage/ drop protection with this case?
Quality, overall fitting & feel?
It will protect if dropping on the corners as well as face down. However dropping on the back might be a problem because the camera lens are protuting out (although the case cover the camera lens). Placing the phone on the table will also result in wobbly phone when using.
---------- Post added at 06:15 AM ---------- Previous post was at 06:13 AM ----------
Quality, would say it is better than those generic cheap tpu case (which has worse fit than imak), feel wise, it is slippery on the back.
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
It covers the side? The picture on amazon looks like it is an open side design. I don't see slapping that case will provide a good grip.
lornranger said:
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
Click to expand...
Click to collapse
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Davisk8 said:
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Click to expand...
Click to collapse
I am using Asus Original Screen Protector without antibacterial coating. The antibacterial protector is not available in my country. Great protector, no blocking of edge unlike the cheap china protector which has thick black borders and block the edges of the display.
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
Thanks for this, I did think about getting this over.
I'm using the magnetic flip case which is great, but no front lip so don't drop the thing like I did, broke my display as the screen protector didn't quite cover all of it and a tiny stone hit the outer edge.
Not the end though as I've bought another, and will get it repaired under insurance consider it a lesson learned.
￡2.32 23%OFF | Safety protective Glass for Asus Rog Phone 3 ZS661KS Oleophobic Screen Protector For ROG Phone 3 Strix Tempered Glass Film
https://a.aliexpress.com/_B0aeTT
This was with the rog case which in all honesty shouldn't come with it.
This is the protector, don't bother with it, I've another coming that has smooth edges, looks decent so will see.
Turns out the one I've ordered might be the same Asus sells.
￡1.59 | For Asus ROG Phone 3 Phone3 ZS661KS / Strix 6.59" 21D 9D Full Glue Cover Toughened Tempered Glass Film Screen Protector Guard
https://a.aliexpress.com/_B0iH9b
the lighting case but I installed a diy wireless charger because I have so many already laying around
[/COLOR]
elmor0 said:
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Click to expand...
Click to collapse
FEEDBACK
Took about 5 weeks to arrive (from China).
This IMAK case is good build quality and fit over all, could have been a bit more snug - the extra corner padding does not make it look slick, and I am not sure if it is worth it on balance.
There is a 2 mm lip all around the front panel to help with screen protection.
Cut-outs are spot on - including for air-triggers/ 3 mics/ heat vent/ side USB ports. No cut-out for SIM-tray though but it's better this way.
Camera module is fairly well protected.
No issues with air-trigger related squeeze gestures.
The Hydrogel clear gel screen protector had a ?extra notch cut-out just left of the front camera (?? why) but otherwise the rest of the dimensions were spot on. It came as a set of x2 in one pack, which was a nice surprise. Included a helpful set of instructions/ link to video.
I preferred it to be short by about 1 mm all around the edges to minimise the risk of "lift" when the case is compressed in pockets/ when using the squeeze gestures etc.
The touch feel is smooth and has a good response. Visibility through this screen film is fine; no glare issues. I prefer these type of gel screen protectors to glass.
Has anyone come across a case that doesn't need to be removed when connecting to the accessories (eg Twinview, Mobile Desktop Dock)?
Related
Bought the fusion crystal case from Ringke:
GOOD:
- Completely transparent to show off Z5P's sexy back
- Grip is pretty solid
- Caps for both the headphone jack and the USB port provides additional protection for when you have that occasional dip in the pool.
- Looks premium; doesn't look cheap
- Has these four little bumpers at the back to prevent the case from being scratched when put on a flat surface
- Volume rocker and power rubbers can be easily pressed
- Scratch-resistant (so far)
- Comes with free screen protectors for both front and back
BAD:
- Fingerprint magnet (so you need to wash it after a hard day's use)
How is that and where did you get it from?
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Lad said:
How is that and where did you get it from?
Click to expand...
Click to collapse
i'm from canada so i bought it at amazon.
kcteun said:
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Click to expand...
Click to collapse
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
when i put on the back protector is clear as i can still see the mirror, after removing the top layer sticker which is part (2) my back protector goes matte. i suddenly feel so disappointed. the matte back looks nice but i still prefer the mirror back. im struggling should i remove the back protector as it is a very good quality and when i stick it on theres very little bubble and easy to take out those bubble.
Lawliet918 said:
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
Click to expand...
Click to collapse
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
I also have this case. My Chrome z5p looks gorgeous in this. Quality
Transparent with 1 year
Enviado de meu E6853 usando Tapatalk
Hi everyone, I am using Ringke Fusion Smoke Black for my Sony Xperia Z5 Premium. I have selected smoke black after reading some online reviews & some fitting issue, as after some time clear one gets yellowing. I am happy with smoke black.
ill be getting the smoked black one in the mail soon will report back with a small review
do this case makes the phone a lot hotter ?
otaolaurruchi said:
do this case makes the phone a lot hotter ?
Click to expand...
Click to collapse
No it does not make the phone hotter
Too thick for my taste...
Sent from my Xperia Z5 Premium!
Got a scratch 1st day... And I have a too big gap at the back around the cam so dust comes in between the case and the phone. Annoying on a black phone... Good fit besides that
Infraaa said:
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
Click to expand...
Click to collapse
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
diji1 said:
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
Click to expand...
Click to collapse
Got mine yesterday, smoke black, and my pone looks great. You have to use the back cover and everything will work and look as intended. Good qualiy case but a bit pricy
This is the best case for z5p. Its not over protected, but just enough. Also fits perfect.
Huge fan of Ringke Fusion cases in general, as I used them on few of my past phones. I will go as far as saying this is probably the best case of this clear/hybrid type in general, beating even the Spigen Ultra Hybrid which is quite hyped case. I find Ringe Fusion extremely precisely built, with perfect cutouts, and also the button cover sections are very easy to press, and you perfectly feel the "click" underneath. One more thing I like, is that the surface is so gentle to wipe, and not sticky at all, like some kind of oleophobic coating for plastic is there. I'm using the smoke black version on my Z5P, and I love it, along with matt protector for back side which takes away some of the mirror effect, but also reduces smudges and dust visibility.
Sent from my E6833 using Tapatalk
I am using this too, protection is superb, design details are satisfying, well considerate,
I waited a few weeks to review these to be able to give a more in depth review.
Zagg Curved HD: http://www.zagg.com/us/en_us/invisibleshield/samsung-galaxy-s7/glass-curve-samsung-galaxy-s7
This is Zagg's tempered glass, edge to edge screen protector. As most of you may know, yes it is dot matrix and therefore the adhesive is only present around the edges of the screen protector.
The application process was relatively easy. Washed my hands to make sure oil is off, aligned the top cut outs first and the rest of it fell in place. I would say it was a near perfect install based on where the home button, camera, sensors are in relation to the cut outs of the screen protector.
I first used it for a week with the RhinoShield bumper case. I am comfortable to say that the bumper case went quite nicely with the screen protector. there wasn't any major lifting except for one of the top corners where there was VERY minor lifting visible. The screen protector wasn't going anywhere even with the bumper case on. The protector felt nice when in use, finger glides just like the gorilla glass.
Onto the not so good points.
Significant loss of sensitivity. I couldn't wait to rip it off but I really wanted to give it a fair chance so I left it on for another week without the bumper case to see if it makes a difference. It didn't. I don't know how, but over time it actually got worse. Made typing and browsing really annoying. I guess because the glass only adheres around the edges, it also left a tiny bit of space between the the protector and the actual screen, therefore when I type it would make this tapping sound. The protector also adds a little bit of thickness to your phone, therefore the home button will be a bit depressed. And because of this bit of added thickness, even with the raised edge lips from the rhino shield bumper case, when my phone face planted in my bathroom, the Zagg protector cracked slightly. Now of course this could be different if you have a more heavy duty case which a more pronounced raised lip around the edges.
Rhino Shield bumper case: http://www.evolutivelabs.com/collec...cts/galaxy-s7-bumper-case?variant=12325884673
There is a video on youtube showing the protection that this bumper case provides, specifically for the s7. Mod Edit: Link removed. Page contains affiliate sales links. Not allowed on xda thanks!
There are more that shows the case with other phones. Their claim is it will protect the phone up to 11ft drop.
As I said above, if you are looking for a case that is somewhat friendly with the Zagg curved HD, this case would do the job.
Besides that, I must say I love this case because it's very light, adds very little bulk yet have a lot of real users backing up its level of protection.
The front and back of the bumper case have raised lips, more so on the back especially on the 4 corners. The buttons of the case are a tad bit harder to press in comparison to the Spigen I reviewed earlier, but it's still pretty responsive.
The only negative is that for some reason, one side of the case seems to be a LITTLE loose (side of the power button); it's not as snug as the other side. From a quick google search, It seems like the same issue exists with other phones and someone posted a response from Evolutive Labs saying that because the case is not made of TPU material, they purposely made the case not as snug such that it's easier to install the case . I am going to email Evolutive Labs about this and I will update this thread when I hear back. I must say tho this looseness is not noticeable when you are using the phone so it doesn't bother me. In fact it makes me feel more comfortable putting the case on with a screen protector since it's not going to bite into the screen protector as much.
Considering the Rhino Shield's price, would you say it's good value?
RebDovid said:
Considering the Rhino Shield's price, would you say it's good value?
Click to expand...
Click to collapse
Hard for me to give a personal opinion since our canadian dollar sucks right now, therefore after conversion it's actually 30-35 cad with shipping.
If I am in the states tho, I would definitely pick this over the other cases that are in the same price range based on the level of protection it provides while being a minimalistic case.
I think they would gain a lot more interest at $20 usd with more color options but then with more color options it may end up increasing their production cost.
My current phone is a Nexus 6P and I have been using a Spigen case + an intelliArmor tempered glass screen protector. Both products are excellent and I have been thrilled with them (and the phone), but the battery is starting to go on me so I figured it was time for a replacement. After some research I settled on the XZP (G8142).
I was able to order the Spigen case for the XZP, but intelliArmor does not make a screen shield (that I can find), so I was wondering if anyone has had any experience with Supershieldz before.
I looked at getting the Skinomi skin and just using the part for the screen along with the Spigen case, but I really prefer tempered glass.
Looking forward to my first Xperia phone!
** UPDATE **
The protector, phone, and case all came in. The Spigen case is top notch as expected, as is the phone itself.
The screen protector is also fantastic. I tried putting it on the recommended way (using the guide stickers), but I could never get the right alignment using this method. I ended up free-handing it and lining it up as best I could, and I think I got within a half millimeter or so of a perfect application (the bottom is perfect, the top speaker is slightly off but not enough to be annoying or obstruct the speaker). There were absolutely no air bubbles to smooth out, which surprised me.
GreenDev9 said:
My current phone is a Nexus 6P and I have been using a Spigen case + an intelliArmor tempered glass screen protector. Both products are excellent and I have been thrilled with them (and the phone), but the battery is starting to go on me so I figured it was time for a replacement. After some research I settled on the XZP (G8142).
I was able to order the Spigen case for the XZP, but intelliArmor does not make a screen shield (that I can find), so I was wondering if anyone has had any experience with Supershieldz before.
I looked at getting the Skinomi skin and just using the part for the screen along with the Spigen case, but I really prefer tempered glass.
Looking forward to my first Xperia phone!
** UPDATE **
The protector, phone, and case all came in. The Spigen case is top notch as expected, as is the phone itself.
The screen protector is also fantastic. I tried putting it on the recommended way (using the guide stickers), but I could never get the right alignment using this method. I ended up free-handing it and lining it up as best I could, and I think I got within a half millimeter or so of a perfect application (the bottom is perfect, the top speaker is slightly off but not enough to be annoying or obstruct the speaker). There were absolutely no air bubbles to smooth out, which surprised me.
Click to expand...
Click to collapse
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Mobfigurz said:
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Click to expand...
Click to collapse
Mine has the glue on the edges but there's no oil or anything in the middle.
It looks very similar to the Supershieldz one, might even be a rebrand. It's under the brand name "Panzer Glass".
It works pretty much flawlessly.
Xifar said:
Mine has the glue on the edges but there's no oil or anything in the middle.
It looks very similar to the Supershieldz one, might even be a rebrand. It's under the brand name "Panzer Glass".
It works pretty much flawlessly.
Click to expand...
Click to collapse
The one I purchased is very similar also, but has the cut-out where you can see the Sony 'logo'. Reviews are poor for those, everyone has observed the same issues as myself. I have purchased several other Tempered Glass Protectors, still waiting for them to arrive, different styles and brands to see which is the best fit with the best coverage. I will report back.
Mobfigurz said:
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Click to expand...
Click to collapse
I didn't actually notice if the adhesive was along the edges or the entire piece of glass, but it seemed like the whole piece had adhesive when I peeled off the protective plastic before applying.
I have been using the phone with the protector for about two weeks and here are my observations:
I have moved my thumbs with ample pressure across the face of the protector to see if the glass shifts or moves. It hasn't budged.
No oily residue or weird artifacts.
The fit is quite nice. Without a case, the edges would be noticeable, but with the Spigen case on you can hardly tell there is a screen protector.
In bright/direct sunlight or when you hold the phone in bright light just right you will see a grid of dots on the LCD screen - I don't know if this is because of the protector or the screen itself. It doesn't bother me as it is not noticeable the majority of the time.
My account is too new to link to external sites, so just search supershieldz xperia xz premium on Amazon and it should come up.
GreenDev9 said:
I didn't actually notice if the adhesive was along the edges or the entire piece of glass, but it seemed like the whole piece had adhesive when I peeled off the protective plastic before applying.
I have been using the phone with the protector for about two weeks and here are my observations:
I have moved my thumbs with ample pressure across the face of the protector to see if the glass shifts or moves. It hasn't budged.
No oily residue or weird artifacts.
The fit is quite nice. Without a case, the edges would be noticeable, but with the Spigen case on you can hardly tell there is a screen protector.
In bright/direct sunlight or when you hold the phone in bright light just right you will see a grid of dots on the LCD screen - I don't know if this is because of the protector or the screen itself. It doesn't bother me as it is not noticeable the majority of the time.
My account is too new to link to external sites, so just search supershieldz xperia xz premium on Amazon and it should come up.
Click to expand...
Click to collapse
Appreciate the feedback. I have just taken possession of a Muvit Tempered glass, it is clear without any borders but just the same as the rest. Everyone I have tried thus far has adhesive only on the edges, the larger portion of the screen is free to flex and move and due to that, requires a firmer press and in doing so, you hear a crisp packet like noise, a sort of crunching sound. Really annoying me now, but it is due to the curvature of the screen that we are seeing a lack of good quality glass protectors. For the Z5P I found P-Think on Amazon to be the best, yet to find any suitable candidates for the XZP.
I will order a double pack of Supershieldz soon.
Just received my case included is a screen protector and some goodies you can check the pictures. All for the price of 14 RMB. I bought it from JD.com in China. It took 11 days until I received my order because they were waiting for orders to start manufacturing the case since it's still a new phone.
Link to the store: https://item.m.jd.com/product/40266...are&utm_campaign=t_335139774&utm_term=CopyURL
After a successful application. Thanks to God Almighty.
Looking Good
Any news for a back skin transparent or otherwise,
From the likes of skinomi & illumi aqua sheild?
Rashad83 said:
Just received my case included is a screen protector and some goodies you can check the pictures. All for the price of 14 RMB. I bought it from JD.com in China. It took 11 days until I received my order because they were waiting for orders to start manufacturing the case since it's still a new phone.
Click to expand...
Click to collapse
Dentist.M.Evy said:
Looking Good
Any news for a back skin transparent or otherwise,
From the likes of skinomi & illumi aqua sheild?
Click to expand...
Click to collapse
Regarding a back skin I am not aware of any sold in China probably outside of it maybe yeah. The only cases that were available for the 1st generation ROG were only these type of TPU cases. I hope it's not the same case for the ROG 2. So far the only cases you can find for the ROG 2 are the TPU and book cover types.
Can you still use the air triggers with this case?
Cammarratta said:
Can you still use the air triggers with this case?
Click to expand...
Click to collapse
Looks like there are cutouts for them
Cammarratta said:
Can you still use the air triggers with this case?
Click to expand...
Click to collapse
Yes there is a cut out for air triggers and side USB. I can use the air triggers but not comfortably, if you use them too much I would suggest using the plastic case included with phone instead.You can check the cut outs from the pictures attached.
I bought a TPU Case and Tempered Glass screen protector off eBay (both came from the same seller) for my ROG Phone 2 (Tencent 8GB/128GB model), so I thought I'd share my thoughts on them.
Case ($10.89): Ultra Thin Soft Silicone Case For ASUS Rog Phone 2 ZS660KL Shockproof Back Cover
Screen Protector ($14.89): Nillkin CP+Pro Tempered Glass Full Screen Protector For ASUS ROG Phone 2 ZS660KL
I love both items!
The case is probably one of the best TPU cases available for the ROG Phone 2 at the moment. All ports are accessible, everything lines up properly, Air Triggers still work great, it has a nice 0.3mm raised lip around the screen to help protect it. Overall, nothing really bad to say about the case, other than maybe the "Soft Silicone" part of the name is a bit misleading as its not like super soft rubber or anything like that. Its flexible before inserting the phone, but I wouldn't really call it soft silicone. Still though, its a great case and I feel the phone is protected from small accidental drops now (definitely more-so than the stock clear hard plastic case that comes with it)!
The Tempered Glass screen protector is also great. The fingerprint sensor still works just fine, Its easy to apply, it can be lifted and re-positioned if you don't get it on perfect the first time. I was worried about the black borders around this particular screen protector when I first bought it, but everything lines up perfectly and doesn't appear to be covering or blocking anything when positioned correctly on the screen!
Edit: ok so even when installed perfectly, the black borders on the sides of the screen protector do block a tiny bit of the screen when viewed straight on... But it is tiny, like maybe 5 or 10 pixels on each side of the screen. You really gotta be looking for it to notice it though.
Edit2: so it also seems there is a very slight decrease in touch screen sensitivity with the tempered glass screen protector installed. After using it for awhile I noticed very occasionally it wouldn't register my input and I'd have to tap again. HOWEVER, this phone is so awesome, it has a built in way to solve this issue. Just go into the settings, then Advanced, scroll to the bottom and enable Glove Mode! It's meant to increases the touch screen sensitivity while wearing gloves, obviously, but works well to fix this minor issue as well.
bluegizmo83 said:
I bought a TPU Case and Tempered Glass screen protector off eBay (both came from the same seller) for my ROG Phone 2 (Tencent 8GB/128GB model), so I thought I'd share my thoughts on them.
Case ($10.89): Ultra Thin Soft Silicone Case For ASUS Rog Phone 2 ZS660KL Shockproof Back Cover
Screen Protector ($14.89): Nillkin CP+Pro Tempered Glass Full Screen Protector For ASUS ROG Phone 2 ZS660KL
I love both items!
The case is probably one of the best TPU cases available for the ROG Phone 2 at the moment. All ports are accessible, everything lines up properly, Air Triggers still work great, it has a nice 0.3mm raised lip around the screen to help protect it. Overall, nothing really bad to say about the case, other than maybe the "Soft Silicone" part of the name is a bit misleading as its not like super soft rubber or anything like that. Its flexible before inserting the phone, but I wouldn't really call it soft silicone. Still though, its a great case and I feel the phone is protected from small accidental drops now (definitely more-so than the stock clear hard plastic case that comes with it)!
The Tempered Glass screen protector is also great. The fingerprint sensor still works just fine, Its easy to apply, it can be lifted and re-positioned if you don't get it on perfect the first time. I was worried about the black borders around this particular screen protector when I first bought it, but everything lines up perfectly and doesn't appear to be covering or blocking anything when positioned correctly on the screen!
Edit: ok so even when installed perfectly, the black borders on the sides of the screen protector do block a tiny bit of the screen when viewed straight on... But it is tiny, like maybe 5 or 10 pixels on each side of the screen. You really gotta be looking for it to notice it though.
Edit2: so it also seems there is a very slight decrease in touch screen sensitivity with the tempered glass screen protector installed. After using it for awhile I noticed very occasionally it wouldn't register my input and I'd have to tap again. HOWEVER, this phone is so awesome, it has a built in way to solve this issue. Just go into the settings, then Advanced, scroll to the bottom and enable Glove Mode! It's meant to increases the touch screen sensitivity while wearing gloves, obviously, but works well to fix this minor issue as well.
Click to expand...
Click to collapse
Good tip on using glove mode when you use a tempered glass screen protector. Thanks!
Hi,
Stumbled on this Android Central article for Asus ROG phone 2 cases - Link
The first one mentioned as the staff pick looks promising.
Found the similar one on AliExpress - Link
Has anyone bought this TPU case, If yes can you give feedback or share images
qwertymk16i said:
Hi,
Stumbled on this Android Central article for Asus ROG phone 2 cases - Link
The first one mentioned as the staff pick looks promising.
Found the similar one on AliExpress - Link
Has anyone bought this TPU case, If yes can you give feedback or share images
Click to expand...
Click to collapse
I have that staff pick case, bought it on eBay. Reviewed it and a screen protector here : https://forum.xda-developers.com/rog-phone-2/accessories/tpu-case-screen-protector-ebay-t3968465
bluegizmo83 said:
I have that staff pick case, bought it on eBay. Reviewed it and a screen protector here : https://forum.xda-developers.com/rog-phone-2/accessories/tpu-case-screen-protector-ebay-t3968465
Click to expand...
Click to collapse
I've also ordered the nillkin CP+Pro tempered glass.
Have been using their tempered glasses for years. They are the best.
Can you also share images from bottom and top of the cover with phone?? And how much thickness does this cover add to the phone?
Also does it create issues in heat dissipation?
Thanks
qwertymk16i said:
I've also ordered the nillkin CP+Pro tempered glass.
Have been using their tempered glasses for years. They are the best.
Can you also share images from bottom and top of the cover with phone?? And how much thickness does this cover add to the phone?
Also does it create issues in heat dissipation?
Thanks
Click to expand...
Click to collapse
Including the 0.3mm raised lip around the phones screen, this case adds a total of 2.5mm of thickness and 3mm of width to the phone.
Measuring with my digital calipers, the phone without a case is 9.5mm thick and 78mm wide (not including the slight camera bump or the phones buttons). With the case on it measured 12mm thick and 81mm wide.
Heat dissipation is still excellent. I haven't noticed any change at all in temperatures.
I've looked everywhere but its nowhere to be found, can anyone guides me as to where I can get a good tpu case?
International vendors ship to india but delivery dates are no less than 30 days after I order.
Hi,
No TPU case present in India as of yet.
I have bought the one described in this thread - link
The units sold is very less in comparison to other brands like oneplus that is why you don't see recognised brands like spigen, otterbox or ringke creating a case for this phone.
Your best bet is to place an order on Aliexpress or Amazon.com.
Though sellers will be shipping cases from china only.
Please share if you find out some other good case?
Also look at these cases available as of now - Link
bluegizmo83 said:
Including the 0.3mm raised lip around the phones screen, this case adds a total of 2.5mm of thickness and 3mm of width to the phone.
Measuring with my digital calipers, the phone without a case is 9.5mm thick and 78mm wide (not including the slight camera bump or the phones buttons). With the case on it measured 12mm thick and 81mm wide.
Heat dissipation is still excellent. I haven't noticed any change at all in temperatures.
Click to expand...
Click to collapse
Thanks for the reply, I guess you indulge in DIY projects (measuring the dimensions using digital calipers :laugh
Do you play games on this phone? Do you observe noticeable increase in temp with the cover placed?
qwertymk16i said:
Thanks for the reply, I guess you indulge in DIY projects (measuring the dimensions using digital calipers :laugh
Do you play games on this phone? Do you observe noticeable increase in temp with the cover placed?
Click to expand...
Click to collapse
Lol yup lots of DIY and 3D Printing stuff.
I play lots of games on it via emulators, and some native gaming with PUBG and the new COD Mobile. No noticable temp increases.
This one is out of this world LOL!
https://www.ebay.com/itm/ZIMON-Alum...36373735?_trkparms=ispr=1&hash=item3b37a113e7
jkeener88 said:
This one is out of this world LOL!
https://www.ebay.com/itm/ZIMON-Alum...36373735?_trkparms=ispr=1&hash=item3b37a113e7
Click to expand...
Click to collapse
I wonder how that aluminum will change reception...
i ordered imak mate/sand feel case
its 0.1mm above the screen protector but it have air bags and not slipery as transperent ones sides are more loose then the silicone transperent case
i also ordered the this fist case from android central lets see how its hold
who have best oleophobic coating on the glass?
Ok guys I got the Xperia 1 iii after much thought and since I got it after getting the official Sony case and a screen protector I have been through 3 glass screen protectors in like the first couple of weeks and hadn't even droped my phone outside . I put this down to the poor protection from the official Sony case offers. So I purchased the Spigen case that offers the full bumper cover and replaced another Spigen glass screen protector for little under £15 and after putting it on my bed side cabinet last night and getting in the car this morning I noticed the screen protector is broken again .and I haven't even dropped it inside . So I'm down over £100 in the last month or so and geting fed up with trying to find a decent case and screen protector for the Xperia 1 iii
I also look for a good screen protector. Which one can I get on Amazon Italy?
I have read that it is best to avoid the spigen align master.
As a cover I feel great with the Spigen
Spigen case is great. You will not find a suitable screen protector because the edges of the screen are still "curved" thereby not allowing the protector to cover the entire screen edge-to-edge. I gave up on a screen protector for most phones lately due to this fact.
jaseman said:
You will not find a suitable screen protector because the edges of the screen are still "curved" thereby not allowing the protector to cover the entire screen edge-to-edge.
Click to expand...
Click to collapse
I think it depends on what you mean by edge to edge protection. If you mean it covers the entire front, bezels included all the way to phone edges than no there isn't one, though those screen protectors with black borders all around get pretty close. The draw back is that depending on the manufacturer, some of them have black borders covering the edges of the screen more than others, which can be noticeable and annoying.
There are also screen protectors that go slightly beyond the edge of the screen. As in you can see the border between the screen and the bezels right beneath the glass, but that's about it. I consider that screen edge to edge and I have been using that. As you mentioned, since the screen curves ever so slightly at edges, the edge of that screen protector doesn't sit 100% flush on the screen.
Some manufacturers give a kind of transparent filler glue that you can brush in the gap along the edge to fill it up and make it looks seamless instead of a visible air gap. However because it isn't a solid surface, the glass along the edges can crack if you press your screen edge hard enough multiple times, maybe from an intense gaming session. But under normal use, so far it held up.
I don't have recommendations, as I bought them from my local e-commerce site, although they are direct from China, so I'm sure they are there somewhere on Taobao or Aliexpress. I am not sure of which ones are these if I were to search on those platforms, or on your platforms like Amazon.
I use spigen glass and except the first one that broken easily i have no issue.
I bought spigen case but trashed it after a single day..too bulky...i bought a 10 Eur in soft clear silicon off amazon.it (Elyco Cover) Not the best against yellow tint but i smoke then no case will ever be safe from yellow tint.
But this cover is really really thin and don't ruin phone appearance
The spigen cover for iphone 12 pro was good, pretty thin but protective. The one for Xperia 1 III from spigen is really really bad, it protect well but increase the size of the phone in a nasty way
Evil_Sephiroth said:
I use spigen glass and except the first one that broken easily i have no issue.
I bought spigen case but trashed it after a single day..too bulky...i bought a 10 Eur in soft clear silicon off amazon.it (Elyco Cover) Not the best against yellow tint but i smoke then no case will ever be safe from yellow tint.
But this cover is really really thin and don't ruin phone appearance
The spigen cover for iphone 12 pro was good, pretty thin but protective. The one for Xperia 1 III from spigen is really really bad, it protect well but increase the size of the phone in a nasty way
Click to expand...
Click to collapse
Not sure which Spigen case you are talking about but the one I have does not add hardly anything to the feel of the phone. Oh well, to each his own!
jaseman said:
Not sure which Spigen case you are talking about but the one I have does not add hardly anything to the feel of the phone. Oh well, to each his own!
Click to expand...
Click to collapse
The Spigen ultra hybrid (in 2021 It was the only cover for Xperia 1III fine by Spigen)
And compared to the One i use now is sensibly bigger and bulkier, also i found the hard plastic parts in the rear of the cover pretty nasty.
For example on my old Xperia 1 i have the Spigen Crystal liquid cover and if you compare that Spigen cover with the One for X1 III Is pretty clear how the new cover made the phone bulkier.
It's not much, around 1-1.5 mm thicker, but the feeling Is worst, at least for me.
https://us.amazon.com/Spigen-Rugged-Armor-Designed-Xperia/dp/B08V32DGL7/ref=sr_1_2?crid=LVB4LWO43ZWQ&keywords=spigen+rugged+armor+xperia+1+ii&qid=1647539155&sprefix=spigen+rugged+armor+xperia+1+iii%2Cspecialty-aps%2C67&sr=8-2
$12.00 can't be beat!
I really recommend the original cover with stand:
Osłona z podstawką do smartfonu Sony Xperia 1 III | XQZ-CBBCB - Etui - sklep internetowy Sony Centre
XQZCBBCB.ROW : Stylowa osłona z podstawką do smartfonu Xperia 1 III
scentre.pl
It is made of materials that helps heat dissipation and also anti-bacterial.
Maybe it's only a cover and expensive one but I can say it is really a good quality. So I can recommend it.
Spigen cases all the way. Had them since my Nexus 6P.
If you can get up to north Wales tech base they have what they call clear shield it's like that dbrand skin I have it on my Xperia 5 ii only prob is getting there and paying 20 pound of you want I can show pictures of the front and back o also have the like crabon type back cover and also have Duc ducis flip case I alternate between the 2 and go naked sometimes
Here's what I was on about