Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
Hi my friends... i am new here and i have a problem with my nexus 9 wifi with 5.0.1 firm.
i ad try to root my device and he works nice ... but later tried install the kali nethunder 2.0 on my nexus 9.
i downloaded the image of kali , i downloaded also the TWRP Manager from google play and then installing the TWRP correctly.
so far so good ..at the momment!
Then... entered to the recovery mode i put the install button , I searched for the kali nethunder image and then execute it correctly!
He made some time to install it , when it finished the installation , rebooting and stuck there!
i turn off and rebooting again to the bootloader menu , i make the factory reset but after the reboot , it show me the adroind error icon witha red triangle...
I Dont now what to do now, my pc is not recognizes my nexus . the only screen i have is the scrren with the recovery, factory reset,sim lock, image crc ,show barcode and ram test !
but the recovery and the factory reset is not working... if i put those two it show me again the ...
the icon of adroind error with a red triange.
You have me suggest some solution ??? help me please ...
Thanks any way !!!
Can you get into fastboot mode (Power + Vol down, when device is turned off).
If so try manually flashing stock factory image.
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Im facing the same issue.
Please let me know if you were able to fix it.
I had yhe USB debug mode off when my phone crashed. The recovery is also corrupt. Nothing hets displayed after Volume up + power.
Phone is not detected by the computer, so cant use QF
Swipe Elite Plus Fully Wiped "No OS" Stuck on Swipe Logo
As for now reaching every corner of my no OS issue I can Quote sure problem happend to my device.
I really want to explain everything how it happed. Firstly
1.I bought Swipe Elite Plus 2 monts back, everything was fine but then suddenly after one week using at the mornig time I see Phone shutting down after every 2 to 4 min.
2. When I head to settings "about phone" phone backs to home screen if I swipe to and fro 5 to 6 time device switch offs' .
So wasn't stepping towards flashing .... before flashing what I did was
1. reset.. then hard reset... switch off hold volume + and Power button bootloader hardreset. Evrything done but the result was same (hangs /switch off).
2. In recovery mode i can see 9 times reset logs.. gave up..then
I googled for stock rom... I could not find for first 1 month or two until now...
3. Then I downloaded stock rom for this device (Swipe Elite Plus) found from previously posted swipe forums links (google drive), Drivers, Tools, and Stock Rom...everything.
4. But I get... sahara Fail...this is not possible with Sahara protocol..
#
# Tried several times.. changing ports...Qualcom driver installation.... everything was right (doubted driver problem ~but tried everything/manual port driver update to Qualcom.... QLoader 9008)...
# But sahara Fail.... Cannot procced with sahara protocol....
---------------------
Read forum.... thought to root....rooted with iroot(not sure rooted or not rooted) however TWRP flashed... and wiped everthing now no OS....
# No way to connect to pc. I can hear connection (sound) when i plug in usb to phone then phone switch on and stuck on swipe elite plus logo..
# however I can enter to TWRP recovery by volum up + power button...and When I go to "power off" from reboot option in TWRP phone offs' then on again and stuck on swipe logo, while usb cable is still connected and I can hear connection sound but no signs (nothing) of device at "Device Manager"....
#Can I have any ROM/CM to flash from internal memory as I can still access Internal storage (through PC) in TWRP mode and rooted...??.I will try...
#Do I need convert emax mini/ TCL M3G ..?? But no way to usb connecion??? only sound...( I am Using win7 32bit)
Any Links to flash file plz....????
My swipe elite plus wont boot
Well.. somehow I have QFIL flashed the TCL M3G rom following the UMI forum tutorial..
But I can not restore QCN backup (Downloaded from given link 216kb) bcz.. Port is not Showing 9091 com port.... When I go to QFIL>>Tools tab>>backup /restore>> then select the downloaded QCN file then backup and restore button is inactive...I know it bcz of com Port ....QDoader 9008(COMxx)...
# But then If I try to Switch on it Stuck on Small Linux logo (No more Swipe Elite Plus/phone changed to TCL M3G)...And sometimes Loads big "Android" Logo for 1 or 2 then shuts down and nothing happens.... I can boot to bootloader....TWRP is Gone...
# I did try to flash the stock rom found at aplush.xyz but this time it is again Sahara Fail...Sahara..Fail...
What Can I do...??? :fingers-crossed::fingers-crossed::fingers-crossed:
anuragkumar19 said:
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Click to expand...
Click to collapse
I am also facing same problem
This happened everytime whenever i tried to hard reset
May be flashing custom rom will help
Bt im afraid if while processing it may cause the same problem
problem of swipe elite plus hang on logo and screen blinks
guys first tell me if your phone is rooted or not
if your phone is not rooted then try the below steps
download swipe elite plus firmware
download android usb driver
download qualcomm driver
download QPST
move the swipe elite plus firmware to the following path:-my computer/local disc(C)/program files/qualcomm/QPST/bin
then you will not encounter sahara error
now press and hold volume+ and volume- button at atime and connect usb cable simultaneosly
you will entert diwnload mode
now provide qualcumm driver path and open QPST AND flash your firmware
enjoy
I rooted my swipe elite plus with Kingroot and uninstalled some system apps and also apps provided bt swipe.....Then..there was no problems and i've restarted several times after i rooted and uninstalled the system apps...but when i uninstall Kingroot (unroot) Then my phone got stuck on Swipe logo ...I tried hardreset (volumup+power) But didt work again stuck at the logo..What Can i do please help
from ,
jahir ali abbas
pallapatti karur district tamilnadu.
To,
swipe elite plus MD
swipe mobile
unrespected sir,
this is a worst mobile i have ever had. bakwas mobile. china company. not booting whats the solution u fellows.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
---------- Post added at 12:03 PM ---------- Previous post was at 11:52 AM ----------
"download fail firehorse fail fail to load qdloader port after switch" plz help.
Swipe elite plus blank screen even after successful flash with stock rom
My swipe elite plus show blank black screen, even after several times flashing with stock rom... What should i do... When i use ADB commands, it shows null device. Kindly help me..
... I also tried it to flash with videocon v502830 rom.. But after 36% completion, it shows nprg error.. Or 5002...but phone status appears to be rooted while this flash.
Have you tried going "NUCLEAR" Android=>> ♧♧♧ !!!
IDK if code works on iOS, other OS. After W 8.1, I went in 2010 to 2.2 -> 8.1 now on Pixel 2(loved it, native OS w/No bloat like Samsung & never went back -> Android/Chrome). Code as follows.
*2767*3855#
It's a complete wiping of your mobile also it reinstalls the phones firmware(in XDA forum). "Work for me with 'normal' FRR or HR -> 'no joy' or for non-military means 'nothing' -> Mech Engr/CS B.S. degrees. If you are ~XDA, your risk, ask the Mods or leads for XDA if my suggestion is ok"!
so i have a blu dash music 4.0 and one day i got a encryption unsuccessful error and i clicked reset but it did not boot into recovery mode it booted in to android with a ton of errors in fact i was unable to get to the home-screen so i rebooted to recovery mode and did a hard reset but when i rebooted the same thing happened i tried it five more time and then it wont let me into recovery mode and is in a boot loop it shows the BLU logo for 5-15 seconds then reboots to the same thing i know i have dev options enabled but i don't know if i have usb debuging enabled or if my bootloder is unlocked i cant get it to connect to the computer with the battery but if i take the battery out and plug it in to my computer and press the vol buttons it will connect to the computer for like 5 seconds i have tried re flashing using this tut: "how to use smart phone flash tool to flash any blu smartphone" but it failed
please help thanks