Related
TWRP Recovery 3.0.2.0 For Samsung Galaxy Star GT-S5282
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Team Win Recovery Project (TWRP), is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.
Screenshots
Under screenshots tab
Installation
Pick your build type, i.e recovery flashable or Odin flashable.
If recovery flashable, simply put the zip in phone, and flash it from an existing working recovery.
If Odin flashable, go to download mode, connect to PC, run Odin, select 'PDA', select the twrp tar.md5, flash it.
Enjoy.
Walkthrough
Since our device resolution is low, TWRP does not fit into the screen, hence there is a button with arrow key (left/right), which indicates that there is another section of the page, pressing that button takes you to the other section.
Downloads
Flashable ZIP
ODIN Flashable tar
Device Specific Source
Here .
Credits
@corphish
@Dreamstar
@psych.half
@andii_nr
TeamWin
XDA:DevDB Information
TWRP 3.0.2-0, Tool/Utility for the Samsung Galaxy Star
Contributors
LahKeda
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-08-08
Created 2016-08-08
Last Updated 2016-08-08
Fetures And Notes !
Fetures
You can now backup your EFS partition !
Full Selinux support !
Compressed using LZMA to fit our device space !
Notes
-You will not be able to unpack this recovery image to take kernel image or modify ramdisk as the ramdisk is compressed using LZMA not GZIP to fit the device recovery partition ! - You will only get kernel Image if you used boot-repacker for windows - .
-If you are going to build a recovery using device tree provided in this thread you'd better use the prebuilt kernel provided with the tree !
Hello reserved
Cool bro !!! please tell me whether it is possible to flash the kernel r10 "psych.half"on cm13 by using a script http://forum.xda-developers.com/showthread.php?t=2670512
medved197938 said:
Cool bro !!! please tell me whether it is possible to flash the kernel r10 "psych.half"on cm13 by using a script http://forum.xda-developers.com/showthread.php?t=2670512
Click to expand...
Click to collapse
You can't flash psych.half kernel on cm13 it won't work .
pretty cool,.THANKS for this one...
s5282
"E:signature verification failed"
what can I do?
got it
Pfff. installed windows on old comp and managed to install TWRP using Odin.
No idea why it doesn't work with adb
anyway I guess I'm last one with this phone on this planet
Is it still working? I tried everything but couldn't flash twrp in my gt 5282
ShineBaka said:
Is it still working? I tried everything but couldn't flash twrp in my gt 5282
Click to expand...
Click to collapse
Install as odin flashable.tar. Install odin 3.10.6, add it to the AP part and flash it. I just tried it works
Worked like a charm thanks
i installed with odin, flash succeded, but when i want to go to recovery by power + volup + home it just turns off and restart. when i use adb reboot recovery it just turns to android default recovery.
---
edit: i'm not sure how but it's working
OrangeFox Recovery Project
Code:
Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this recovery * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you.
OrangeFox is FREE SOFTWARE
Supports MIUI and Custom Roms
Credits
* OrangeFox Recovery Project Team
* @LUNARIO, who did ALL the work, but sadly opened a thread violating the rules and the link to Recovery was deleted and the thread moved. Original here.
FEATURES:
* Touch Screen every single time
* Decryption works
* Fixed Error 7 while clean or dirty flashing (starting from version 6)
* Migrate backup installation (starting from version 6)
* OTG support
* ROM Flashing works 100%
* F2FS Support
* Fastboot commands supported
NOT WORKING FOR NOW:
* Fastbootd
* ADB Sideload
* Backing up and restoring Image Flash (system-vendor-product)
DOWNLOAD
Version 6 - Google: https://drive.google.com/file/d/1eHM9ST9ni-55bbT3z-TGSZQsgE3KYr9s/view
OLD VERSION DOWNLOAD
Version 4 - Google: https://drive.google.com/file/d/1Qq6hqaEOstxajOC7Y6AGeRYajhMWjttL/view
Version 0 - Sourceforge: https://sourceforge.net/projects/or...x-R11.0_0_Alpha-Unofficial-surya.img/download
INSTALLATION
1. Download the OrangeFoxRecovery IMG file to your PC.
2. Restart your POCO X3 in Fastboot mode (Power+Vol Down)
3. Use ADB and type in the following command:
Code:
fastboot flash recovery "OrangeFox-R11.0_6_Alpha-Unofficial-surya.img"
4. After it is installed successfully, type in this command:
Code:
fastboot boot "OrangeFox-R11.0_6_Alpha-Unofficial-surya.img"
5. The device will automatically reboot into OrangeFox Recovery after installation (allow this to happen)
6. Enjoy!
Version Information
Status: Alpha
Alpha Release Date: 2020-10-14
Does it support dd commands to backup/flash persist.img?
I tried but after I flashed xiaomi eu and went back to recovery, the touchscreen would't work
hope this gets updated i like this recovery
olujnap316 said:
hope this gets updated i like this recovery
Click to expand...
Click to collapse
here you can download updated version, I have this flashed for around one week... so far so good, but still adb sideload not working... dunno what other bugs are there... I am flashing with this NitrogenOS.... zero problems for me so far...
jeryll said:
here you can download updated version, I have this flashed for around one week... so far so good, but still adb sideload not working... dunno what other bugs are there... I am flashing with this NitrogenOS.... zero problems for me so far...
Click to expand...
Click to collapse
yes i saw that on telegram. but why is it not updated on this thread.
olujnap316 said:
yes i saw that on telegram. but why is it not updated on this thread.
Click to expand...
Click to collapse
oh, you were talking about the thread itself, sorry... but the recovery itself will work the same regardless number of posts here on xda or telegram... I personally don't care where are new versions announced...
Not affiliated
olujnap316 said:
yes i saw that on telegram. but why is it not updated on this thread.
Click to expand...
Click to collapse
Because sadly I am not the developer and I cannot post Telegram links here.
I can update manually, as long as any of you guys DM me the link to the Telegram group, so I can join.
@jeryll @olujnap316
Can anyone of you guys provide the Telegram link for me to update the thread more often?
Best regards,
billabongstaff said:
Because sadly I am not the developer and I cannot post Telegram links here.
I can update manually, as long as any of you guys DM me the link to the Telegram group, so I can join.
@[email protected]
Can anyone of you guys provide the Telegram link for me to update the thread more often?
Best regards,
Click to expand...
Click to collapse
@POCox3OfficialUpdates just search that on telegram, they posted the latest orangefox there
Thank you
olujnap316 said:
@POCox3OfficialUpdates just search that on telegram, they posted the latest orangefox there
Click to expand...
Click to collapse
Thank you, man.
I appreciate it.
I'll try to keep the thread updated.
Best regards,
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
nikolaos8 said:
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
Click to expand...
Click to collapse
of course there are, you can use Google search with the exact query you posted here and you can then choose where to start learning or click here...
nikolaos8 said:
Are there any written instructions anywhere on how to run the adb tools and commands precisely? Total noob here
Click to expand...
Click to collapse
Very good for Beginners. ▼
For ADB
https://android.tutorials.how/adb-commands/#adb_devices_command
For FASTBOOT
https://android.tutorials.how/fastboot-commands/
Update.
New build is up.
Version 6.
Fixes error 7 while clean or dirty flashing.
Backup migration now works.
Cheers.
Thanks guys. Made small instructions video for the absolute noobs (me included).
Tools used: https://developer.android.com/studio/releases/platform-tools
Instructions on adb commands and flashing:
1. Bootloader Unlocked
2. Download the latest Orangefox boot.img from first post and put it into a dedicated folder in your computer.
3. Go to the folder where you have put the Orangefox-file. Now open a command window inside that folder. To do that hold together "Shift + Right click" on any empty white space inside the folder and then select "Open PowerShell Window Here" or "Open Command Window Here" (depends on your pc).
4. Enter fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
5. Enter the terminal command in command line: >>fastboot flash recovery OrangeFox-R11.0_6_Alpha-Unofficial-surya.img
(Needs to be exactly as the name of the file, in case developer uploads new version with new name)<<. Attention: Do not restart your device otherwise Xiaomi's original recovery might overwrite Orangefox!
6. After, device will reboot into Oangefox recovery.
Video Tutorial: https://youtu.be/E7fl_02Kgc8
I had also downloaded the latest Magisk zip (not Manager) from here: https://github.com/topjohnwu/Magisk/releases and placed it into the device before flashing Orangefox, so that i flash Magisk directly from recovery (as we left it above), in order to ensure it will not lose Orangefox installation after reboot.
In case it does not automatically reboot, hold +VOL + Power Button in order to reboot into the new orangefox recovery and install magisk zip from there ( do not forget to have it downloaded somewhere on your device before initiating the procedure)
Thanks everyone, especially OP for his contributions!
Factory reset /wipe prevents userdata to be decrypted? For twrp after you do a factory reset you have to format userdata even without password/pin inside the OS.
Can i backup persist partition with this recovery?
Hi!
I'm getting the error "Failed to map file" while I try to flash Magisk in this recovery.
Any help?
Hope this recovery will be official soon ! I don't know why there is no stable built yet of twp or yours ! I'm waiting for it to flash !
Jess182 said:
Can i backup persist partition with this recovery?
Click to expand...
Click to collapse
Yes you can using dd.
Hi everybody,
I have followed several guides here and after trying 2 different methods and read other tutorials, there is no way to root my op7t pro (actually with last version lineage os). Also add that I have the phone unlocked and lineage recovery.
So, I thought maybe it should be easier to flash again oxygen os, then obtain root with method payload dumper and finally flash again lineage.
Nevertheless, I didn't find any guide about this process, could you please shed some light about this point?
Thanks in advance
Soul_Viper said:
Hi everybody,
I have followed several guides here and after trying 2 different methods and read other tutorials, there is no way to root my op7t pro (actually with last version lineage os). Also add that I have the phone unlocked and lineage recovery.
So, I thought maybe it should be easier to flash again oxygen os, then obtain root with method payload dumper and finally flash again lineage.
Nevertheless, I didn't find any guide about this process, could you please shed some light about this point?
Thanks in advance
Click to expand...
Click to collapse
What methods have you tried?
What is your logic for going back to oos and rooting, then installing lineage again? You won't retain root this way.
Hw4ng3r said:
What methods have you tried?
What is your logic for going back to oos and rooting, then installing lineage again? You won't retain root this way.
Click to expand...
Click to collapse
Tried this one:
[Updated/All Versions & Models!] Root OnePlus 7T Pro
How to root any version of the OnePlus 7T Pro! 1. Make sure your bootloader is unlocked! 2. Once you're unlocked enter the following ADB commands to extract your current boot image (Your phone needs to be on) adb shell dd...
forum.xda-developers.com
Also this another one:
[Magisk][ROOT][EdXposed]Auto install tool - Magisk Installer for OnePlus 7T Pro
#include /* * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included...
forum.xda-developers.com
So finally, after reading and seeing that basically all the rooting methods consider the phone is on oxygen os and can't find any real way to root from custom rom, I have considered the best option was going back to stock rom and start all the fu... process again
Soul_Viper said:
Tried this one:
[Updated/All Versions & Models!] Root OnePlus 7T Pro
How to root any version of the OnePlus 7T Pro! 1. Make sure your bootloader is unlocked! 2. Once you're unlocked enter the following ADB commands to extract your current boot image (Your phone needs to be on) adb shell dd...
forum.xda-developers.com
Also this another one:
[Magisk][ROOT][EdXposed]Auto install tool - Magisk Installer for OnePlus 7T Pro
#include /* * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included...
forum.xda-developers.com
So finally, after reading and seeing that basically all the rooting methods consider the phone is on oxygen os and can't find any real way to root from custom rom, I have considered the best option was going back to stock rom and start all the fu... process again
Click to expand...
Click to collapse
So when you are on a custom rom and have it booted. You install magisk manager. Then you take the boot.img from the rom zip or payload from that rom. Next put it on the storage of your phone. Open magisk manager and select install then patch boot omg and select it on your storage. It will generate a patched image in your downloads folder. After that copy the patched image back to your computer and put it in your fastboot tools folder. Open cmd prompt in your fastboot folder. Reboot your phone to fastboot mode. In the cmd prompt type fastboot flash boot (name of patched boot image).img then reboot your phone and you should be rooted
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Working Features:
- Decryption Works
- Backup works
- Wipes Work
- MTP
- ADB
- OTG
- RUI 2 ozip Flashing
- RUI 1 ozip flashing
Not Working:
- No f2fs support yet
- Not tested on CN variants (Can't confirm working status)
Flashing Guide:
Patched VBMETA is must to boot a twrp , so flash the below image to successfully boot this recovery and make it available even after booting back to RealmeUI.
Download Links:
TWRP Download Link
VBMETA Link
To flash TWRP:
fastboot flash recovery twrp-3.6-RUI2-RMX1931-final.img
Flash the VBMETA using below commands
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_path.img
ADB and Fastboot Drivers:
ADB and Fastboot Installer
Source code:
https://github.com/TeamWin/android_bootable_recovery
https://github.com/arnodorian-r/recovery_realme_RMX1931
https://github.com/arnodorian-r/kernel_realme_sm8150
Credits:
Thanks to @mrtechnophile2.0 , Roy for the testing
Thanks @pjgowtham @XiaoAk for guiding me
The best thing ever happened for realme ui 2. Great work mate..!
Finally, a proper working Recovery for our device
Wow...Finally Working TWRP for RMX1931 on RUI2.
Thanks alot bro.
Can I flash this, when I'm on Lineage-18.1?
zheka99 said:
Can I flash this, when I'm on Lineage-18.1
Click to expand...
Click to collapse
Technically its possible...but you should do it after roms released based on rui2 firmware. If not , you will endup with broken OS. For now dont flash custom roms with this recovery.
can i flash magysk to optine root, wich version?
Isavar said:
can i flash magysk to optine root, wich version?
Click to expand...
Click to collapse
Magisk-92546e8a(23016) from CANARY all Ok!
Sorry for my English. And thank you very much for your work. I have the mobile with the latest version of rui2 and with root done following this guide:
https://forum.xda-developers.com/t/...fix-rui-2-0-android-11-global-indian.4371041/ When I went to install twrp, the mobile only started in twrp , and I had to reinstall everything. I used realme flashtool and refollowed the guide to get me back up and running properly. What could have happened?
Leozgz85 said:
Sorry for my English. And thank you very much for your work. I have the mobile with the latest version of rui2 and with root done following this guide:
https://forum.xda-developers.com/t/...fix-rui-2-0-android-11-global-indian.4371041/ When I went to install twrp, the mobile only started in twrp , and I had to reinstall everything. I used realme flashtool and refollowed the guide to get me back up and running properly. What could have happened?
Click to expand...
Click to collapse
Hi
was the same for me, had to reinstall everything, only started in TWRP. Would like to install the recovery but I don't feel like this error anymore.
Thanks. It's working.
Doesnt work for me, i cant boot to realme ui after flashing the vbmeta, i got stuck on recovery. (f.14)
This recovery is broken for me, it gives me no space left on sdcard even after a full data reformat, ozip extraction stops after 500mb.
It's just not working as it should 3.4 works best
arnodorian-r said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Working Features:
- Decryption Works
- Backup works
- Wipes Work
- MTP
- ADB
- OTG
- RUI 2 ozip Flashing
- RUI 1 ozip flashing
Not Working:
- No f2fs support yet
- Not tested on CN variants (Can't confirm working status)
Flashing Guide:
Patched VBMETA is must to boot a twrp , so flash the below image to successfully boot this recovery and make it available even after booting back to RealmeUI.
Download Links:
TWRP Download Link
VBMETA Link
To flash TWRP:
fastboot flash recovery twrp-3.6-RUI2-RMX1931-final.img
Flash the VBMETA using below commands
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_path.img
ADB and Fastboot Drivers:
ADB and Fastboot Installer
Source code:
https://github.com/TeamWin/android_bootable_recovery
https://github.com/arnodorian-r/recovery_realme_RMX1931
https://github.com/arnodorian-r/kernel_realme_sm8150
Credits:
Thanks to @mrtechnophile2.0 , Roy for the testing
Thanks @pjgowtham @XiaoAk for guiding me
Click to expand...
Click to collapse
I followed this guide and many others in the past 48 hours, with no success. Every time I flash TWRP and the VBMETA, I get stuck in TWRP bootloop.
I started unblocking the bootloader, rolling back to RUI1 - Android 9 and using the Deep-Test App.
After the roll back, I got the phone unblocked right, but then first soft-brick, with only bootloader available and no way to flash a working ROM. After some searches, I've finally managed to unbrick, using OPPO flash tool, and installing stock rom RMX1931_11_F.14_2021102817443142.
This gives me a working phone, RUI.2 - Android 11. Standard recovery.
I tried to flash TWRP and got the phone soft bricked again, in TWRP recovery bootloop.
I'd like to install TWRP and from there going to OrangeFox and finally install Lineage 19.1...
How can i first have a working TWRP recovery??? If you can support also following steps, would be amazing. Thank you!!!
I went few step further... but still I am not able to install a working custom recovery for my realme X2 pro.
I have now also rooted my device with magisk.
I just need a custom recovery to perform 2 actions:
- make a NANDroid backup;
- install a custom ROM.
Any advice? Thank you for your time!
Installed. Working like a charm with lineage 19.1. Only problem: can't access files in storage. Digging into the matter, it seems to be an issue with android 12's new encryption method, which can't be overriden by this version of the recovery. There's a brand new TWRP 3.7.0_9.0 in the official TWRP website which boasts to overcome this problem but, whenever I try to install it (with or without the vbmeta.img provided for version 3.6.0_11), the recovery won't start. Guess a new vbmeta.img is needed as everything goes ok reinstalling TWRP 3.6.0_11 and its corresponding vbmeta. Tried to extract and install vbmeta.img from the lineage zip file without success. Shall we have to patch vbmeta.img? How can we do that? Through Magisk? I've come across some "vbmeta patcher" apk... Am I pointing the right way?
can any one help me to unlock bootloader in realme x2 pro . i am on RUI 10 . i installed in depth tool it said seccesful but no bootloader just keep rebooting and showing fast boot for a moment .. help please i search every where for fix but no way to yet
I'm using the CN variant device, which I understand does not yet have confirmed support, nonetheless sharing the error I'm encountering in case it's a simple or obvious fix I'm missing.
Having followed all above steps, I'm able to flash and get into TWRP recovery, but decryption always failed (even after a dozen tries) with the following:
"Attempting to decrypt FBE for user 0...
Failed to decrypt user 0"
Much obliged for any insight on this. I'm attempting to get back on OF after successfully installing Lineage 19.1, which broke the OF recovery, and since OF needs to be installed as a ZIP, I need to get some version of TWRP working as an intermediary. Specifically this is because I didn't install GAPPS along with Lineage 19.1 (I misread the opening post, which seemed to imply that GAPPS was included in that particular ROM). So alternatively, if there's another way to get GAPPS onto the device without recovery (sideload won't work since I can't decrypt...) then that would be helpful too.
Thanks in advance for any insight on this!
Hey Guys,
for relocking the Bootloader i need a freshly backuped Stock Recovery.img from a DN2103_A19.
Can someone of you provide this please?
I only found the newest Boot.img and the newest vbmeta.img of A19.
I did get managed to relock my bootloader. The Problem was not my recovery, it was the boot image.
Here are my steps for Anyone Interested:
1. With the PartitionBackupper I restored my phone to A16.
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
[TOOL][NO ROOT] PartitionsBackupper | Nandroid alternative
/* * Your warranty is... still valid! * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. * Please do some research yourself before asking or use anything on this...
forum.xda-developers.com
2. Booted to Bootloader and flashed TWRP
3. In TWRP via ADB Sideload I flashed DN2103_update_A16_to_A17.zip and the DN2103_A17_to_A19.zip
[STOCK][DN2103][EU] Incremental update packages & Boot images
Hi All, Below you can find a couple of incremental update packages that you can use for updating from various versions of your device. Incremental update packages These can be installed using TWRP by following this tutorial...
forum.xda-developers.com
4.Format Data in TWRP and Reboot to Bootloader
5.Fastboot flash recovery stock_recovery.img
6. Fastboot flashing lock