The phone that never dies, gets a new Android version yet again.
Samsung only gave it Android 4. Lineage gives it Android 11. A whopping amount of 7 newer versions than the last official one it came with. This time I can present a usable build almost 3 months earlier than what was the case with Lineage 17.1.
All major functions should be working, but keep in mind that there's probably some features not yet ported over to Lineage 18.1.
For root, use Magisk (untested on R): https://github.com/topjohnwu/Magisk
If you are doing backups of 18.1 with TWRP, and wants to restore one of these backups,
you need to flash this right after restoring, or otherwise the boot will hang: http://www.mediafire.com/file/a454nnpp8l7afbr/fix_rootfs_label.zip/file (Needed only for older TWRP, and not for the one linked to below)
Download:
GT-I9190: https://www.mediafire.com/file/xlk1a08s0sek9rl/lineage-18.1-20230419-UNOFFICIAL-serrano3gxx.zip/file
GT-I9192: https://www.mediafire.com/file/25pwxi62shwwif0/lineage-18.1-20230419-UNOFFICIAL-serranodsdd.zip/file
GT-I9195: https://www.mediafire.com/file/azdm...8.1-20230419-UNOFFICIAL-serranoltexx.zip/file
SPH-L520: https://www.mediafire.com/file/4jir....1-20230420-UNOFFICIAL-serranoltespr.zip/file
SCH-R890: https://www.mediafire.com/file/fjbo....1-20230420-UNOFFICIAL-serranolteusc.zip/file
Recovery (TWRP):
GT-I9190: https://www.mediafire.com/file/e42oml5716ekvk7/twrp-3.6.2_9-0-serrano3gxx.img/file
GT-I9192: https://www.mediafire.com/file/2plk5azmfxwsm5z/twrp-3.6.2_9-0-serranodsdd.img/file
GT-I9195: https://www.mediafire.com/file/wtsopyh3rmfoatf/twrp-3.6.2_9-0-serranoltexx.img/file
SPH-L520: https://www.mediafire.com/file/iw68mr671fgftnb/twrp-3.6.2_9-0-serranoltespr.img/file
SCH-R890: https://www.mediafire.com/file/417w6vp0m338fb0/twrp-3.6.2_9-0-serranolteusc.img/file
Link to all builds:
GT-I9190: https://www.mediafire.com/folder/0g24ygtc8xqvn/lineage-18.1
GT-I9192: https://www.mediafire.com/folder/vjczfo09021i8/lineage-18.1
GT-I9195: https://www.mediafire.com/folder/datnj63h9apck/lineage-18.1
SPH-L520: https://www.mediafire.com/folder/1lor6ilgr76oe/lineage-18.1
SCH-R890: https://www.mediafire.com/folder/7w7268i9ypxb0/lineage-18.1
Unofficial OpenGApps: https://sourceforge.net/projects/althafvly/files/gapps/
MindTheGApps: https://wiki.lineageos.org/gapps.html
Sources:
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_serrano-common
https://github.com/LineageOS/android_device_samsung_serrano3gxx
https://github.com/LineageOS/android_device_samsung_serranodsdd
https://github.com/LineageOS/android_device_samsung_serranoltexx
https://github.com/arco/android_device_samsung_serranoltespr
https://github.com/arco/android_device_samsung_serranolteusc
Cellular not working on the 9192? Upgrade your baseband: https://forum.xda-developers.com/t/modem-odin-stopped-samsung-galaxy-s4-mini-duos-i9192.2768593/
First to say thank you. In other devices I've seen bitgapps boot fine.
@arco68
Wonderful, you are the best!
A thousand thanks for your great job
FYI:
https://bitgapps.cf/arm/R/
https://forum.xda-developers.com/android/software/custom-bitgapps-android-t4012165
See section : Known Issue
Many thanks @arco68 . Many thanks really.:angel::angel::angel:
Do you have plans for other variants in future builds?:victory::victory::victory:
palmiye1 said:
Many thanks @arco68 . Many thanks really.:angel::angel::angel:
Do you have plans for other variants in future builds?:victory::victory::victory:
Click to expand...
Click to collapse
Eventually yes.
Absolutely incredible....thank you, arco68!
@arco68
THX for your work and this Rom.
Tried clean install with BitGapps and all work fine.
Did anyone try YouTube playback? I remember it was an issue in Lineage 17, and that we needed a fix for it. Just wondering if it's still the case.
arco68 said:
Did anyone try YouTube playback? I remember it was an issue in Lineage 17, and that we needed a fix for it. Just wondering if it's still the case.
Click to expand...
Click to collapse
It is still failing, YouTube fc's immediately. The same applies to FM radio. Otherwise, a flawless release.
mdx54 said:
It is still failing, YouTube fc's immediately. The same applies to FM radio. Otherwise, a flawless release.
Click to expand...
Click to collapse
Shouldn't force close, just that the video playback is garbled. Anyway that should be fixed in next build.
First post updated with links to new builds.
Added build for GT-I9190.
Video on YouTube fixed.
Tethering fixed.
Other fixes.
Hello @arco68
First of all i want to say it's one of a great build!
I've been visiting XDA forum for years, playing with different ROMs on different devices i had in my past, Samsung S2 (I9100), HTC Desire HD, Samsung Tab Pro (SM-T525).
A week ago i found my wife's old Samsung S4 mini from drawer, I did XDA search for it and saw that somebody has made some good job on releasing new ROMs.
What i did from stock to your LOS 18 build.
First flashed latest firmware with Odin I9195XXUCQL2_I9195XXUCQL2.tar [RECOVERY][OFFICIAL] TWRP 3.4.0-0 [I9190][I9192][I9195][L520]
Installed latest TWRP twrp-3.4.0-0-serranoltexx TWRP for Samsung Galaxy S4 Mini (International LTE)
And followed instructions from this thread.
About ROM, some actions take some time, got some keep stopping messages, but what you expect form 8 year old phone.
Youtube - no problems with playback.
Installed also Outlook and Teams, both working fine only some notifications arrive with delay.
I have problem with sending and receiving SMS, clicking on contacts messaging button i get Could not start conversation. From Messaging i could select contact but can not start typing message.
Also do not receive any messages. Is it corrupt installation or i'm missing some settings on my phone?
arco68 said:
First post updated with links to new builds.
Added build for GT-I9190.
Video on YouTube fixed.
Tethering fixed.
Other fixes.
Click to expand...
Click to collapse
Hi,
News on source code layout (cleanup).
Thank you in advance
Great job .......but i have i9192 ... i wait your work for this device.
@arco68
Installed last Version , works so far.
I tried video calls with google duo and signal messenger.
On both apps video is OK, but microphone is not working .
I'm not 100% sure but issue was also on LOS 17 with some video calls.
I've flashed it and it works usually very well, but once in a while the file managers don't see the internal storage.
But the bigger problem is that i can't flash Magisk. TWRP cannot mount /vendor. Is there another way to root it? Or to flash any zip?
Nicador38 said:
I've flashed it and it works usually very well, but once in a while the file managers don't see the internal storage.
But the bigger problem is that i can't flash Magisk. TWRP cannot mount /vendor. Is there another way to root it? Or to flash any zip?
Click to expand...
Click to collapse
What version of twrp are you using?
carlos974 said:
What version of twrp are you using?
Click to expand...
Click to collapse
The one in the link below
http://www.mediafire.com/file/uatfq62gkjw2ao9/twrp-3.4.0-0-serranoltexx.img/file
Also, i tried to back up my old system with this TWRP version; it seemed to work, but when i restored it, the phone got stuck at the boot logo (before showing the boot animation).
Nicador38 said:
The one in the link below
http://www.mediafire.com/file/uatfq62gkjw2ao9/twrp-3.4.0-0-serranoltexx.img/file
Also, i tried to back up my old system with this TWRP version; it seemed to work, but when i restored it, the phone got stuck at the boot logo (before showing the boot animation).
Click to expand...
Click to collapse
Device?
Related
Official Cyanogenmod 14.1 Motorola athene Released for Moto G4/G4 Plus.Find the below link for Download.
https://download.cyanogenmod.org/?device=athene
stkpxl said:
Yay! Guessing you need the latest soak test modem and bootloader to install though?
Click to expand...
Click to collapse
That's a negative. My understanding is the soak test is needed in the plus because of finger print scanner issues. I have the XT1625 and it runs great without the soak test. Flash the quark kernel too. Waaaaaay better benchmark results.
stkpxl said:
I just installed it. Definitely didn't need the soak test. VoLTE works too when I called my voicemail to check. No crash on the Gallery app either like I've seen reported. And the best part for me is that Republic Wireless works with it and the app works too! Usually they don't support custom ROMs but this time everything works.
Click to expand...
Click to collapse
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
I've just rooted my phone, I'm in 6.0.1, I just need to download and put this in SdCard, later Install w/o gapps and it will works?
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
mikemelbrooks said:
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
Click to expand...
Click to collapse
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Mexickano said:
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Click to expand...
Click to collapse
Were you trying to install the arm64 gapps? I could only install the arm gapps.
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Running 12222016 as of this morning. Have been using it since it first hit the streets. Seems a little unstable. While it's running, it runs great. However, for no apparent reason it reboots my device. I can't seem to pinpoint the cause as it happens sporadically and randomly.
I noted that the blue light filter "sort of" works. It has to be manually activated. Tried the automatic route but it's hit or miss.
hooks024 said:
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
Click to expand...
Click to collapse
That would be because the "other ones" are for MM based ROM's and 2.0/2.2 are for Nougat.
mikemelbrooks said:
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Click to expand...
Click to collapse
Fixed the camera by clearing the camera data and cache!
chrisjwild said:
Were you trying to install the arm64 gapps? I could only install the arm gapps.
Click to expand...
Click to collapse
Im a dumb, I was installing other gapps, now Im not getting any issue, only about video recording but I'll fix it flashing a boot.img.
Thanks to all.
I always install ROM boot it then go to browser and search Gapps it automatically finds the one I need then just download and reboot to recovery and install so I don't have any issues the Roms are all comparable for bothering devices but I think arm is different between devices if that helps anybody
:crying: Sad News Guys Cyanogen is shutting down all its services from 31st Dec 2016.
But
http://lineageos.org/
Hi,
I bought a Moto G4 for Christmas. I'll receive it tomorrow, and so I'm looking for a good custom rom. I had the Moto G 2014 LTE (thea) running CM14.1. I notice that the last CM build available for athene is the 20161225, and I'd like to know if it's stable. Does it have an option to make volume buttons control media volume instead of ringtone, for instance ?
Thank you, 'n have a nice day !
Yo is cm 14.1 gonna get xposed
I installed the CM 14.1 12/25 nightly on a XT1625 motoG4 non-plus. Upon reboot, the OS asked me to input my password. It was unable to decrypt my data.
I had a pattern PIN, so I looked up the proper numeric sequence and entered it, and the OS told me "my password was correct but the data was corrupt" and suggested I wipe my phone.
I tried this several times with different passwords, and even with completely incorrect passwords it said it was correct but the data corrupt. So I had to wipe my data. After wiping data, nougat 7.1 came up fine.
Note I have a SDcard set as adaptable storage. My guess (and it is only a guess) is this is what screwed me over.
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
slatteew said:
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
Click to expand...
Click to collapse
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
yakzockt said:
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
Click to expand...
Click to collapse
Thanks! I found the latest Nightly and also an updated LineageOS (replacement for Cyanogen since they've stopped) version, might try them both out. I was perusing the Soak Test and saw it doesn't work with XT1625 devices unfortunately. I have the XT1625 non-Amazon version with Republic Wireless. Saw someone posted earlier in this thread that Republic Wireless was working fine on CM 14.1 Nightly, so that gave me some incentive as well.
This will work on any gt58lte device, which includes, but is not limited to, gt58ltexx, gt58ltetmo, gt58ltechn, gt58ltedo.
To install:
(Using the *.img file)
Flash using Flashify if your device is rooted, or using TWRP, if you have another build installed already.
(Using the *.tar file)
Flash using Odin, with your device in Download Mode, with the tar file in the AP slot.
Downloads
twrp_3.1.1-0_gt58lte.img
MD5: 935227b8c84e13805e280cf0e9e7b5e9
twrp_3.1.1-0_gt58lte.tar
MD5: 9a2f10320943053af6a13ff5b504851b
XDA:DevDB Information
TWRP Recovery 3.1.1-0 for Samsung Galaxy Tab A 8.0 - SM-T355/SM-357 (gt58lte), Tool/Utility for the Samsung Galaxy Tab A series
Contributors
r3pwn, The Evervolv Team (for their work on gt58wifi)
Source Code: https://github.com/gt58ltexx
Version Information
Status: Testing
Created 2017-05-28
Last Updated 2017-06-03
Is there any custom ROM for SMT355Y?
Is there???
Jayesh Nirve said:
Is there???
Click to expand...
Click to collapse
Not at the moment, but I'm working on a unified gt58lte LineageOS 7.1.2 build, which would include support for all variants. Running into some issues at the moment, and it doesn't even show the boot animation yet, but I'm working on it.
r3pwn said:
Not at the moment, but I'm working on a unified gt58lte LineageOS 7.1.2 build, which would include support for all variants. Running into some issues at the moment, and it doesn't even show the boot animation yet, but I'm working on it.
Click to expand...
Click to collapse
Pls fastttt
Jayesh Nirve said:
Pls fastttt
Click to expand...
Click to collapse
I'm waiting on a part to arrive in the mail so I can make a debug cable, which will help me out in getting it up and running. For now, though, there isn't much I can do.
Will it work for SM T355Y???
r3pwn said:
Not at the moment, but I'm working on a unified gt58lte LineageOS 7.1.2 build, which would include support for all variants. Running into some issues at the moment, and it doesn't even show the boot animation yet, but I'm working on it.
Click to expand...
Click to collapse
Cool! Carry on with the good work! I'm open to testing if you need a tester
How much more time??
So did that build ever happen?
Keep up the great work man!
r3pwn said:
Not at the moment, but I'm working on a unified gt58lte LineageOS 7.1.2 build, which would include support for all variants. Running into some issues at the moment, and it doesn't even show the boot animation yet, but I'm working on it.
Click to expand...
Click to collapse
I have been looking for a custom rom for a loooong time. All of us for this model. I'm sure that all of us with this underappreciated device is ready to help you out throughout he build. Thanks in advance and good luck
it's okay if you couldn't build the LeneageROM for T355Y but could you tell if is there any way to root this device (currently running on Nougat 7.1.1)
r3pwn said:
Not at the moment, but I'm working on a unified gt58lte LineageOS 7.1.2 build, which would include support for all variants. Running into some issues at the moment, and it doesn't even show the boot animation yet, but I'm working on it.
Click to expand...
Click to collapse
Hi,
Any Update on the OS Development.
Any help would be appreciated. I am Sick n Tired of this factory OS.
It is so slow.
Please help
sjaiswal92 said:
Hi,
Any Update on the OS Development.
Any help would be appreciated. I am Sick n Tired of this factory OS.
It is so slow.
Please help
Click to expand...
Click to collapse
Got it booting, but because of how Samsung implemented the audio amp, it's pretty difficult to get audio working, and the audioserver is crashing so often that mere seconds after the device boots, it gets super laggy and basically unusable.
r3pwn said:
Got it booting, but because of how Samsung implemented the audio amp, it's pretty difficult to get audio working, and the audioserver is crashing so often that mere seconds after the device boots, it gets super laggy and basically unusable.
Click to expand...
Click to collapse
What are you using as your base? CAF/AOSP/LineageOS?
Sent from my Mi A1 using XDA Labs
Thanks for the Update.
Please notify as soon as you this lagging issue is fixed.
Basically If sim card related function, Audio, Wifi and Internet is working then I can help you test this.
Because camera and other functions are not that of a priority for me.
Till the time Main OS is not crashing.
Because I rooted the factory OS and it is getting Crashed every now and then.
Looking forward for next update.
Thanks..
r3pwn said:
Got it booting, but because of how Samsung implemented the audio amp, it's pretty difficult to get audio working, and the audioserver is crashing so often that mere seconds after the device boots, it gets super laggy and basically unusable.
Click to expand...
Click to collapse
How's the OS going @r3pwn. Any update on that audio problem? Also i thing u should begin a new thread for this . This thread should be for the recovery only. And by the way love your twrp:good:
---------- Post added at 05:07 AM ---------- Previous post was at 05:03 AM ----------
JerryGoyal said:
it's okay if you couldn't build the LeneageROM for T355Y but could you tell if is there any way to root this device (currently running on Nougat 7.1.1)
Click to expand...
Click to collapse
Don't know if u got it (its been a long time since your post) but u can root by using latest superSu from chainfire . Just download the beta and flash.
EDIT: TRY THIS. http://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip?retrieve_file=1
Can anyone confirm if the IMG or TAR file does indeed work with the SM-T355Y model?
I have been trying my best to install it. The only way i got it installed was to flash via recovery or using the TWRP App.
Odin just does not want to install it, it sits on analyzing file and just sits there until i close Odin
Both methods worked to install the app using Android 7.1.1 but the recovery does some odd things once installed.
It shows some texture glitches on the bottom of the screen before launching the TWRP Splash page, once it launches in TWRP, it just restarts back to Rom.
I have to re-flash the 3.1.0 rom in order for the recovery to work again.
The method how i went on updating and Rooting the phone is as follows.
1. Installed Stock 6.0.1 Rom, then upgraded to 7.1.1
2. Using Odin I flashed sm-t350_p350_p355_cf-autoroot.tar file, Worked no problem.
3. TWRP 3.1.0 (Filename: twrp_3.1.0-1_sm-t355_16317.tar) using Odin
4. Installed SR5-SuperSU-v2.82-SR5-20171001224502.zip and no-verity-no-encrypt_ashyx.zip.
All worked but when I try installing the TWRP 3.1.1 it just does what i described above.
Any help would be much appreciated.
Squida said:
Can anyone confirm if the IMG or TAR file does indeed work with the SM-T355Y model?
I have been trying my best to install it. The only way i got it installed was to flash via recovery or using the TWRP App.
Odin just does not want to install it, it sits on analyzing file and just sits there until i close Odin
Both methods worked to install the app using Android 7.1.1 but the recovery does some odd things once installed.
It shows some texture glitches on the bottom of the screen before launching the TWRP Splash page, once it launches in TWRP, it just restarts back to Rom.
I have to re-flash the 3.1.0 rom in order for the recovery to work again.
The method how i went on updating and Rooting the phone is as follows.
1. Installed Stock 6.0.1 Rom, then upgraded to 7.1.1
2. Using Odin I flashed sm-t350_p350_p355_cf-autoroot.tar file, Worked no problem.
3. TWRP 3.1.0 (Filename: twrp_3.1.0-1_sm-t355_16317.tar) using Odin
4. Installed SR5-SuperSU-v2.82-SR5-20171001224502.zip and no-verity-no-encrypt_ashyx.zip.
All worked but when I try installing the TWRP 3.1.1 it just does what i described above.
Any help would be much appreciated.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-tab-a/development/recovery-t3426560
how can i root my sm-t355y plz hel
Plz guide me how to root sm-t355y
Is there any custom ROM for SMT355 (gt58lte)?
This LineageOS 14.1 ROM is built from source for Blu R1 HD.
Some features of this LineageOS 14 rom are:
- Hardware rendered LiveDisplay (no UI lag in night mode)
- Android security patches up to October
- Security hardened kernel (including BlueBorne bluetooth patches)
- Kernel patched for Nougat (Nougat compatible SELinux)
- No Chinese spyware
Credits:
zhaofengli (major thanks for getting the rom booting + hotspot/GPS fix, among other things!)
vampirefo
danielhk (GPS fix)
DeckerSu(Initial device tree, MTK patches)
Sources:
Code:
[URL=https://github.com/blumonks/android_device_blu_p6601]Device Tree[/URL]
[URL=https://github.com/blumonks/android_kernel_mediatek_mt6735]Kernel Source[/URL]
[URL=https://github.com/blumonks/android_p6601]Build Manifest[/URL]
[URL=https://github.com/blumonks/twrp_device_blu_p6601]Recovery device tree[/URL]
Downloads:
LineageOS 14.X Downloads
TWRP Recovery
Click to expand...
Click to collapse
Installation Guide:
1) Flash TWRP recovery (See downloads)
Code:
fastboot flash twrp-3.1.1-0-p6601.img
This TWRP recovery has a different device name than previous versions of TWRP.
2) Boot into recovery (Hold vol up when booting and use vol keys to select recovery)
3) If coming from a non lineageOS rom, please format system, data, and cache in recovery before flashing this rom. Otherwise stale files from previous roms may cause bugs.
5) Flash lineage rom
6) Flash gapps (obtain here: http://opengapps.org/)
Current bugs:
Camera does not work. It is still under active research and development.
Bluetooth
Github Issue Tracker (Please do not open duplicate issues)
Please note that support will be limited.
UPDATED BUILD 24 AUG 2020.
If anyone is still using this device, here is an updated build with the August 2020 Android Security Bulletin & all merged LineageOS changes since October 2017. MAKE SURE YOU FLASH USING THE TWRP IN THE ORIGINAL POST! You can flash over any builds in this thread, the camera still doesn't work and I have no interest in fixing it.
https://www.mediafire.com/file/dbdmk...p6601.zip/file
https://gofile.io/d/vTddMJ
Vulnerability said:
Nice! Can't wait to test it! Any screenshots?
Click to expand...
Click to collapse
It's the same as any other lineage rom. Updated OP.
How well does Bluetooth Audio work? Does it make you sound like a Chipmunk?
Is enforcing SELinux supported? Or only permissive?
EDIT: Don't worry I saw the issue tracker post
I'm gonna try this rom
It's nice to see development alive!!!
Hope you could a finally fix the broken camera
Does anyone know anything about the KRACK vulnerability?
zombie_ryushu said:
How well does Bluetooth Audio work? Does it make you sound like a Chipmunk?
Click to expand...
Click to collapse
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
zombie_ryushu said:
Does anyone know anything about the KRACK vulnerability?
Click to expand...
Click to collapse
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
jianC said:
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
Click to expand...
Click to collapse
Thanks for the updated version.
Urg, but I just finished downloading the original release
jianC said:
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
Click to expand...
Click to collapse
Does this fix also apply to the LineageOS 13.x Rom? I need the Front facing camera working, and that works under Marshmellow and not Nougat.
Just wanted to thank you for your hard work and dedication on this ROM project and wish you good luck with the camera as well.
Not that I find the camera on the R1 HD all that useful as it takes pretty lame photos, but the lack of camera is basically the only thing keeping me from ditching Blu software altogether.
I really hope you manage to get a 100% operational LineageOS for the R1 HD.
Yesterday I called Amazon and complained about the software that collected our personal information and data and submitted it to Blu headquarters in China. They said that I could return the phone for a full refund so at this point I am seriously contemplating doing that. The only problem is that I don't have a backup phone.
The lack of resources from MTK based processors is such a deal breaker. I was not aware it would be so difficult to get development going for it when I bought my phone last year.
Now I'm contemplating getting an used phone with better development support after I return my R1 HD.
I really wanted to wait until OnePlus released their new device with a better display and hopefully a near bezel less display and at least IP67 water resistance. That's the reason why I didn't go for the OP5. The upside-down screen was also another one.
If you could get the camera working in LOS than I'd hold on to my R1 HD for a a while longer. But I'm not keeping my hopes up... Just being realistic. Haha!
Thanks again!
Thanks for your support!
As of now, I've been studying the leaked MTK camera sources for other devices and using IDA to see what extra symbols and logic the stock libcameraservice.so and libcamera_client.so has. It appears that replacing these two libs was the key to fixing camera in cm-13 ports.
Thank you!
Oh, I didn't know camera support was fixed for CM 13 on the R1 HD. Maybe I didn't see it here. But I'd much rather have a non Blu version of Android with all security patches even if it's just on marshmallow.
Three days ago I just realized that Blu had a frigging app collecting my personal data and sending it back to China.
It had sent over 5.9MB of data since July 21st. I think it's a lot of data for text only transmissions.
Anyhow, I've been seeing people using Footej on other ROMs in which they could not get the camera working with stock camera app. Is that what you mean by getting the camera to work?
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
khyr said:
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
Click to expand...
Click to collapse
Dang! That's old! I guess devs should be more organized in doing a walk through with links to the files and recoveries needed to flash their awesome work.
Here's mine that I've just uploaded to zippy. I think it's the latest available and should be compatible with all ROMs.
Please report back with your findings and opinions on the ROM.
Please try to use both SIM cards to see if they work okay.
http://www8.zippyshare.com/d/p4HMiDRq/41954/R1_Port_3.1-TWRP.img
khyr said:
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
Click to expand...
Click to collapse
Which version of the ROM is installed on it now? Modified or stock? Which recovery is on the phone? Stock or TWRP?
I can't post pictures but it gives me an error saying that the package is for p6601 and the updated twrp image says device is Life_Max
frosted.efizzle said:
I can't post pictures but it gives me an error saying that the package is for p6601 and the updated twrp image says device is Life_Max
Click to expand...
Click to collapse
Did you download and flash the image I've just shared above?
AndroidBR said:
Did you download and flash the image I've just shared above?
Click to expand...
Click to collapse
Same error
With they recovery You provided above
Thanks for your support!
Android 10 is here!
Took a while, but here's Lineage 17.1 builds, based on Android 10.
Everything should work AFAIK, but let me know if something doesn't.
If you run into problems installing Gapps, you might need an updated
TWRP build. It needed a change to support the new system-as-root
in Android 10. If the official TWRP builds doesn't have it yet, there's
links below of some builds I did.
For root, use Magisk: https://forum.xda-developers.com/apps/magisk
If you are doing backups of 17.1 with TWRP, and wants to restore one of these backups,
you need to flash this right after restoring, or otherwise the boot will hang: http://www.mediafire.com/file/a454nnpp8l7afbr/fix_rootfs_label.zip/file (Needed only for older TWRP, and not for the one linked to below)
Download:
GT-I9190: https://www.mediafire.com/file/ewdbbg757ujbc3r/lineage-17.1-20220816-UNOFFICIAL-serrano3gxx.zip/file
GT-I9192: https://www.mediafire.com/file/a0ya2fdcf0drjt1/lineage-17.1-20220817-UNOFFICIAL-serranodsdd.zip/file
GT-I9195: https://www.mediafire.com/file/3ky5...7.1-20220816-UNOFFICIAL-serranoltexx.zip/file
SPH-L520: https://www.mediafire.com/file/l0le....1-20220817-UNOFFICIAL-serranoltespr.zip/file
SCH-R890: https://www.mediafire.com/file/cqxl....1-20220817-UNOFFICIAL-serranolteusc.zip/file
Recovery (TWRP):
GT-I9190: https://www.mediafire.com/file/e42oml5716ekvk7/twrp-3.6.2_9-0-serrano3gxx.img/file
GT-I9192: https://www.mediafire.com/file/2plk5azmfxwsm5z/twrp-3.6.2_9-0-serranodsdd.img/file
GT-I9195: https://www.mediafire.com/file/wtsopyh3rmfoatf/twrp-3.6.2_9-0-serranoltexx.img/file
SPH-L520: https://www.mediafire.com/file/iw68mr671fgftnb/twrp-3.6.2_9-0-serranoltespr.img/file
SCH-R890: https://www.mediafire.com/file/417w6vp0m338fb0/twrp-3.6.2_9-0-serranolteusc.img/file
Link to all builds:
GT-I9190: http://www.mediafire.com/folder/4kjlyp6v2lfnh/lineage-17.1
GT-I9192: http://www.mediafire.com/folder/hw7l5hqe0fv1m/lineage-17.1
GT-I9195: http://www.mediafire.com/folder/3911mczazsvdt/lineage-17.1
Download Gapps: https://opengapps.org/?api=10.0&variant=pico
Sources:
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_serrano-common
https://github.com/LineageOS/android_device_samsung_serrano3gxx
https://github.com/LineageOS/android_device_samsung_serranodsdd
https://github.com/LineageOS/android_device_samsung_serranoltexx
https://github.com/arco/android_device_samsung_serranoltespr
https://github.com/arco/android_device_samsung_serranolteusc
Cellular not working on the 9192? Upgrade your baseband: https://forum.xda-developers.com/t/modem-odin-stopped-samsung-galaxy-s4-mini-duos-i9192.2768593/
Thanks arco <3
Thanks :good: arne everything working on I9192
Arslan140 said:
Thanks :good: arne everything working on I9192
Click to expand...
Click to collapse
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
khatir bahri said:
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
Click to expand...
Click to collapse
Both Rom and Recovery Works for me on my I9192
Maybe your download get corrupt
Root is not working though as arne said
i tried to patched boot.img for magisk but it did not work either
little things that i notice So far
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
2nd conditions/Summaries that shown on the top section of the settings like turn on mobile data,your phone is on silent..etc There is no way to dismiss that on previous versions you can swype to dissmiss that
Everything seem to be working well in here
And here is some screenshots for ya
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Hello,
thanks for your work.
Sadly there are some ugly and heavy bugs, escpecially regarding some hardware
related things.
Bluetooth Audio stutters and cause the whole system ui to get laggy and also
some force closes can happen. Audio streaming is not possible.
Wifi Direct is not working anymore.
Memory leaks appear.
And so on..
After some hours of intensive and frustrating testing i went back to stock rom
where i never encounter such issues.
Im using the phone at home without any simcard just for audio streaming from
my nas to my hometheatre-system.
Best regards.
Dear arco68 ! What about magisk ?
---------- Post added at 12:26 PM ---------- Previous post was at 11:54 AM ----------
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Arslan140 said:
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
Click to expand...
Click to collapse
Will be fixed in next build.
Jaroslav.100 said:
Dear arco68 ! What about magisk ?
Click to expand...
Click to collapse
Google magisk and system-as-root. It's not a straight forward thing in Android 10, due to the bootimage is not containing a real ramdisk anymore. As far as I could figure out, you have to patch the recoveryimage, and boot to recovery in order for magisk to load. When booting this patched recoveryimage, magisk will boot into the normal system unless you keep the hardware keys pressed all until recovery is loaded. It's all a bit messy, and I could not get this to work though. If anyones gonna mess with this, be sure you have backups, in case normal boot gets broken.
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Click to expand...
Click to collapse
Dual SIM? Probably some stuff are not implemented yet for this.
Thank you arco, we will wait for your updates !
@arco68 is our devices can install the GSI roms or nah ?
Ala Ghanmi said:
@arco68 is our devices can install the GSI roms or nah ?
Click to expand...
Click to collapse
No
Ala Ghanmi said:
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Click to expand...
Click to collapse
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Diresh said:
No
Click to expand...
Click to collapse
Okay get it
---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------
Claudio4780 said:
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Click to expand...
Click to collapse
That's nice
Is network is working fine for both sim , because previously linage os 16 have issue
omgitsavinash said:
Is network is working fine for both sim , because previously linage os 16 have issue
Click to expand...
Click to collapse
Both Sims are working fine
I installed this ROM on my test device. It all works very well. The only problem I noticed was like @franticfreddy said, the Bluetooth audio doesn't work right.
Build 02/06/2023 #OPO
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower R 11.0.0_r46 1.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is pico package since nano its now too big to install ( ARM):
OTA built in on rom for updates easly
Three fingers screenshot ( enable in settings over gestures options )
Support out of the box to microG GmsCore ( https://forum.xda-developers.com/t/...oftware-clone-of-google-play-services.3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
Nethunter/Kali supported
What does not works:
Let me know to add to second post
Download: https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/LineageOS/android_device_oneplus_bacon
Kernel:- https://github.com/LineageOS/android_kernel_oppo_msm8974
Place HOLDER for bugs !
Down link not working.
Gold Ribbed said:
Down link not working.
Click to expand...
Click to collapse
Fixed, bad copy paste, thanks for reporting that !
I have one question, does this rom supports DRM content and apps based on it?
Thanks for this Rod. Working good for me.
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
oneplusausage said:
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
Click to expand...
Click to collapse
Thats normal, the base it self its Los, the diference its on having 3 finger screenshot, microg nogapps support, nethunter support and mock locations apps the system report real GPS instead of mock app ( Pokemon will not ban for using mock location app ), support for face unlock its WIP ( no eta )
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
saphta said:
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
Click to expand...
Click to collapse
If the rom fail to flash its because you need to make that, but on OPO if you did not messed with the partitons before you will be probably just fine flashing and no need to resize. The issue is not really rom problem, the problem its when flashing gapps that will ask for more space, but that is most for bigger gapps packaging, it you use the nano or base package you will have no issues flashing. Sorry for late answer mate !
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
saphta said:
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
Click to expand...
Click to collapse
One or another should be fine, if use open gapps pick the small package and then install the rest trough Play Store !
Will do! thank you very much!
I'm not able to flash opengapps pico : error 70
I tried to resize system partition but not being able...
@danieldmm can you help me?
@danieldmm
I can confirm what amadeumagalhaes wrote above. Gapps pico won't install.
I've installed Magisk, got root and I tried deleting some system files to make more space but all apps I've used gave me the same message: uninstall failed. I used SD Maid, System app remover, My Android Tools.
Any ideas?
P.S.1 Instead of opengapps pico, I've flashed mindthegapps. No issues flashing it even if it's larger than opengapps pico. The issue with deleting system files remains unchanged.
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
saphta said:
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
Click to expand...
Click to collapse
A bunch of us had this same problem with @Tomoms ROM. He managed to fix this in recent releases.
I have no issues on whatsapp. On Tomoms ROM thread it says to restart the app until the overexposure is gone.
Well, its being a while guys, updated OP with 2.0 build done today.
TugaPower R 2.0 2023/06/02
https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
If you have still 1.0 you cannot use OTA since the system its down, to use OTA you need to update the Updater you have on 1.0, will drop on bottom a update apk of Updater if you are on 1.0 and prefer to use OTA, just install as regular app updating the system one. And then use the built OTA to update from 1.0 to 2.0, you can also check the change log after updating the updater, its too big to post here, it have all the changes commited to lineageos since my last build. Enjoy guys, long live to OPO