[ARM64][VENDOR][BOOT][RECOVERY][GSI][V4.0][UPGRADED] - Redmi 7A ROMs, Kernels, Recoveries, & Other Develo

ARM64 VENDOR+BOOT+RECOVERY v4.0 Upgraded , ready for Android 12
All files is ARM64 !!​
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : MOD EDIT: LINK REMOVED
If you have question or you find bug , write to me message on telegram
RECOVERY - TWRP - 3.4.0.20201002 - Maded by me - Source and info about TWRP 3.4.0
VENDOR - 4.0 - Compiled by me - Source Xiaomi - Based on : V11.0.4.0.QCMMIXM
Install only via TWRP flash . Images and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
DOWNLOAD: MOD EDIT: DOWNLOAD LINK REMOVED
-Added fix for brightness - sometimes need factory reset for correct working .
-Added fix for VoLte and VoWifi
-Added buffers for faster internet
-Disabled logcat and bootanimation
-Other tweaks for ram and longer battery live
-Other tweaks for performance
All tweaks are visible in build.prop. Build.prop is visible in quote code ↓↓
# Debug Options for VoLTE
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
# Radio Options for VoLTE
persist.radio.volte.dan_support=true
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
persist.radio.VT_ENABLE=1
# VoLTE hax
PRODUCT_PROPERTY_OVERRIDES += \
persist.dbg.volte_avail_ovr=1 \
persist.dbg.vt_avail_ovr=1 \
persist.dbg.wfc_avail_ovr=1 \
persist.radio.rat_on=combine \
persist.radio.data_ltd_sys_ind=1 \
persist.radio.data_con_rprt=1 \
persist.radio.calls.on.ims=1
# Data Options
# Commented this line out as it was reported to break WiFi calling on some carriers. Not even sure if it's required to begin with.
persist.data.iwlan.enable=true
persist.data.iwlan=1
persist.data.iwlan.ipsec.ap=1
# Other Options
persist.sys.cust.lte_config=true
persist.rcs.supported=1
# end of device/xiaomi/pine/system.prop
debug.sf.nobootanimation=1
logcat.live=disable
persist.cust.tel.eons=1
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
ro.mot.eri.losalert.delay=1000 (could brake tethering.)
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
ro.telephony.call_ring.delay=0
ring.delay=0
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
ro.config.nocheckin=1
persist.sys.use_dithering=1
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
#END of patch MAREK10747
ro.product.first_api_level=28
ro.vendor.build.security_patch=2020-09-01
ro.vendor.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.vendor.product.cpu.abilist32=armeabi-v7a,armeabi
ro.vendor.product.cpu.abilist64=arm64-v8a
ro.product.board=QC_Reference_Phone
ro.board.platform=msm8937
ro.hwui.use_vulkan=
# begin common build properties
# autogenerated by build/make/tools/buildinfo_common.sh
ro.vendor.build.date=Thu Sep 24 21:22:33 WIB 2020
ro.vendor.build.date.utc=1600957353
ro.vendor.build.fingerprint=Xiaomi/pine/pine:10/QKQ1.191014.001/V11.0.4.0.QCMMIXM:user/release-keys
ro.vendor.build.id=QKQ1.191014.001
ro.vendor.build.tags=release-keys
ro.vendor.build.type=user
ro.vendor.build.version.incremental=V11.0.4.0.QCMMIXM
ro.vendor.build.version.release=10
ro.vendor.build.version.sdk=29
ro.product.vendor.brand=Xiaomi
ro.product.vendor.device=pine
ro.product.vendor.manufacturer=Xiaomi
ro.product.vendor.model=Redmi 7A
ro.product.vendor.name=pine
# end common build properties
#
# BOOTIMAGE_BUILD_PROPERTIES
#
ro.bootimage.build.date=Fri Sep 18 20:03:29 CST 2020
ro.bootimage.build.date.utc=1600430609
ro.bootimage.build.fingerprint=Xiaomi/pine/pine:10/QKQ1.191014.001/V11.0.4.0.QCMMIXM:user/release-keys
#
# ADDITIONAL VENDOR BUILD PROPERTIES
#
persist.sys.mcd_config_file=/system/etc/mcd_default.conf
drm.service.enabled=true
debug.stagefright.omx_default_rank.sw-audio=1
debug.stagefright.omx_default_rank=0
vendor.vidc.disable.split.mode=1
ro.control_privapp_permissions=enforce
dalvik.vm.heapminfree=4m
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapmaxfree=8m
ro.hardware.nfc_nci=nqx.default
vendor.hw.fm.init=0
ro.hardware.keystore_desede=true
persist.radio.multisim.config=dsds
persist.vendor.qcomsysd.enabled=1
ro.hardware.vulkan=adreno
ro.hardware.egl=adreno
vendor.power.pasr.enabled=true
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=libqti-perfd-client.so
persist.vendor.radio.apm_sim_not_pwdn=1
persist.vendor.radio.sib16_support=1
persist.vendor.radio.custom_ecc=1
persist.vendor.radio.rat_on=combine
persist.backup.ntpServer=0.pool.ntp.org
sys.vendor.shutdown.waittime=500
persist.vendor.radio.procedure_bytes=SKIP
ro.frp.pst=/dev/block/bootdevice/by-name/config
ro.vendor.qti.config.swap=1
vendor.audio.chk.cal.us=0
vendor.audio.chk.cal.spk=0
af.fast_track_multiplier=1
vendor.audio_hal.period_size=192
ro.vendor.audio.sdk.fluencetype=none
persist.vendor.audio.fluence.voicecall=true
persist.vendor.audio.fluence.voicerec=false
persist.vendor.audio.fluence.speaker=true
vendor.audio.tunnel.encode=false
vendor.audio.offload.buffer.size.kb=64
audio.offload.min.duration.secs=30
audio.offload.video=true
vendor.audio.offload.track.enable=false
audio.deep_buffer.media=true
vendor.voice.path.for.pcm.voip=true
vendor.audio.offload.multiaac.enable=true
vendor.audio.dolby.ds2.enabled=false
vendor.audio.dolby.ds2.hardbypass=false
vendor.audio.offload.multiple.enabled=false
vendor.audio.offload.passthrough=false
ro.vendor.audio.sdk.ssr=false
vendor.audio.offload.gapless.enabled=true
vendor.audio.safx.pbe.enabled=true
vendor.audio.parser.ip.buffer.size=262144
vendor.audio.playback.mch.downsample=true
vendor.audio.use.sw.alac.decoder=true
vendor.audio.use.sw.ape.decoder=true
vendor.audio.pp.asphere.enabled=false
vendor.voice.playback.conc.disabled=true
vendor.voice.record.conc.disabled=false
vendor.voice.voip.conc.disabled=true
vendor.voice.conc.fallbackpath=deep-buffer
persist.vendor.audio.speaker.prot.enable=false
vendor.audio.hw.aac.encoder=false
vendor.audio.flac.sw.decoder.24bit=true
ro.af.client_heap_size_kbyte=7168
persist.vendor.audio.hw.binder.size_kbyte=1024
ro.vendor.audio.voice.volume.boost=manual
ro.audio.soundfx.dirac=true
ro.vendor.audio.soundfx.type=mi
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
vendor.rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
persist.sys.periodic.enable=true
persist.vendor.cts.sensors=false
ro.logd.size=4194304
ro.crypto.volume.filenames_mode=aes-256-cts
persist.vendor.max.brightness=437
vendor.qcom.bluetooth.soc=pronto
persist.vendor.qcom.bluetooth.enable.splita2dp=false
ro.vendor.bluetooth.wipower=false
ro.telephony.iwlan_operation_mode=legacy
sys.fp.miui.token=0
sys.thermal.data.path=/data/vendor/thermal/
debug.svi.logs=1
debug.als.logs=1
ro.vendor.display.svi=1
ro.vendor.display.sensortype=2
vendor.display.svi.config=1
vendor.display.svi.config_path=/vendor/etc/SVIConfig.xml
ro.apex.updatable=false
persist.sys.phh.camera.force_timestampsource=1
ro.vendor.sensors.pseudo_gyro=true
persist.sys.overlay.devinputjack=true
debug.sf.latch_unsignaled=1
debug.sf.disable_backpressure=1
debug.sf.hw=1
debug.egl.hw=1
persist.sys.phh.linear_brightness=true
persist.sys.phh.caf.media_profile=true
Click to expand...
Click to collapse

nice vendor bro super smooth

cavin2424 said:
nice vendor bro super smooth
Click to expand...
Click to collapse
Must to be I working now with little better vendor optimized for gaming , where you have more space on userdata and more free ram . I have few ideas for do that. Now actually I test few options , as possible soon i publish not only very smooth vendor but maybe rom prepared for redmi 7a . I think about very fast rom , without gapps based on Android 11 . In february or march i try to make first alpha or beta android 12 optimized and with fixed bugs . Now I got unofficial source of A12 and i test it with this vendor - working nice , some bugs is in A12 Watch thread . If you like my work , like my thread . Thanks

Thread closed
Threads without proper source are not allowed.
@op: Please pm me when you can provide the necessary.
strongst
Forum Moderator

Related

Device ID Change Questions

Hello!
I have a Galaxy Player 5.0, and I am interested in changing the build.prop file to indicate to the App Store that it is a Galaxy S phone. I would like assistance with that, as well as any answers to the following questions:
1. Risks?
2. I have some commercial apps, and would like to avoid changes that might remove data they rely upon to confirm they are activated (read "paid for"). What do I need to know/do/do-I-need-to-be-slapped-silly?
3. Any ideas as to what data in the build.prop file is often used for purpose of activating (indicating are activated) commercial apps, such as for applications like Sygic, that I should also back-up in case of need in the future, such as with a ROM or Android OS upgrade that might break them?
I just figured-out rooting, (heck, and before that, just figured-out what the different USB modes were in order to make Kies work), then had to work-around the apparent inability of Windows to browse the system in any mode (used Android Commander by PanPiotr), so please forgive how green I am in regards these things: I was on Linux forever and avoided messing around with the GP 5.0 due to old recommendations about updating firmware to the latest before doing this or that, and given I couldn't run Kies, I wasn't sure how to do it at the time.
I will post more info upon request, as I am not really sure I know what info is necessary. These lines<-- look relevant, however:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.UEKI8
ro.build.version.incremental=UEKI8
ro.build.version.sdk=10
ro.build.version.codename=REL <--?
ro.build.version.release=2.3.5
ro.build.date=Fri Sep 16 21:22:25 KST 2011
ro.build.date.utc=1316175745
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-49 <--?
ro.build.tags=release-keys
ro.product.model=YP-G70 <--
ro.product.brand=samsung <--
ro.product.name=YP-G70 <--
ro.product.device=YP-G70 <--
ro.product.board=YP-G70 <--
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=YP-G70 <--
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=YP-G70-user 2.3.5 GINGERBREAD UEKI8 release-keys <--
ro.build.fingerprint=samsung/YP-G70/YP-G70:2.3.5/GINGERBREAD/UEKI8:user/release-keys
# Samsung Specific Properties
ro.build.PDA=G70UEKI8 <--
ro.build.hidden_ver=G70UEKI8 <--
ro.build.changelist=566269 <--?
ro.csc.sales_code=XAA <--
ro.flash.resolution=720
I don't know enough to begin to answer your question, but what I do know is the following:
At a minimum, you should read thru this thread:
http://forum.xda-developers.com/showthread.php?t=1435617
As stated, if you just change the product model in build.prop, it will probably result in bootloop, as it did for me. Using the build.prop file posted by eng_matt on page 4 worked for me (fixed the bootloop), but resulted in the swype "glitch", and the app I wanted from the Play Store was still considered incompatible.
You may want to consider using Titanium Backup to save your applications and data.
Hope this helps
ro.product.model= GT-I9000 is what i put in and didd not give me boot loop
Sent from my GT-I9000 using XDA
Here is how my build.prop looks like I didn't get bootloop I just changed the parts that say GT-i9000 didn't mess with anything else.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKPQ.Klassic_R5
ro.build.version.incremental=XXKPQ
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Nov 1 09:31:52 KST 2011
ro.build.date.utc=1320107512
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-77
ro.build.tags=release-keys
ro.product.model=GT-i9000
ro.product.brand=samsung
ro.product.name=GT-i9000
ro.product.device=GT-i9000
ro.product.board=GT-i9000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-i9000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=YP-G1-user 2.3.6 GINGERBREAD XXKPQ release-keys
ro.build.fingerprint=samsung/YP-G1/YP-G1:2.3.6/GINGERBREAD/XXKPQ:user/release-keys
# Samsung Specific Properties
ro.build.PDA=G1XXKPQ
ro.build.hidden_ver=G1XXKPQ
ro.build.changelist=700402
ro.csc.sales_code=XAA
ro.flash.resolution=720
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/system/lib/libsec-ril-apalone.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r7
wifi.interface=eth0
ro.secdevenc=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Smurfed Out Settings
# By Papa Smurf151
# Smurtastic
#!
# Raise Photo and Video Quality
#!
ro.media.enc.jpeg.quality=100
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
media.stagefright.enable-player=true
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
ro.media.enc.hprof.vid.fps=65
#!
# VM Tweaks
#!
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=128m
dalvik.vm.dexopt-flags=v=n,o=v
#!
# WiFi and 3g Tweaks
#!
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
ro.mot.eri.losalert.delay=1000
#!
# Battery Saving Tweaks
#!
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
ro.ril.disable.power.collapse=1
#!
# Render UI with GPU
#!
debug.sf.hw=1
#!
# Decrease dialing out delay
#!
ro.telephony.call_ring.delay=0
#!
# Helps scrolling responsiveness and Increase overall touch responsiveness
windowsmgr.max_events_per_sec=240
debug.performance.tuning=1
video.accelerate.hw=1
#!
# Disable blackscreen issue after a call
#!
ro.lge.proximity.delay=25
mot.proximity.delay=25
#!
# Fix some application issues
#!
ro.kernel.android.checkjni=0
#!
# Force button lights on when screen is on
#!
ro.mot.buttonlight.timeout=0
#!
# Memory Tweaks
#!
# Qualcom Tweaks
debug.qctwa.statusbar=1
debug.qctwa.perservebuf=1
com.qc.hardware=true
#!
# Misc Tweaks
#!
ro.ril.enable.amr.wideband=1
ro.ril.def.agps.feature=1
ro.ril.def.agps.mode=2
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=0
persist.ril.uart.flowctrl=10
ro.config.disable_hw_accel=false
persist.ril.mux.noofchannels=10
ro.ext4fs=1
persist.sys.shutdown.mode=hibernate
ro.wmt.blcr.enable=0
windowsmgr.support_rotation_270=true
debug.egl.profiler=1
ring.delay=0
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=
MIN_HIDDEN_APPS=
MAX_HIDDEN_APPS=
CONTENT_APP_IDLE_OFFSET=
EMPTY_APP_IDLE_OFFSET=
MAX_ACTIVITIES=
ACTIVITY_INACTIVE_RESET_TIME=
# SuperCharger Installation Marker.
# V6 SuperCharger, OOM Grouping & Priority Fixes created by zeppelinrox.
# SuperMinFree Calculator & MFK Calculator (for min_free_kbytes) created by zeppelinrox also ;^]
#
# See http://goo.gl/krtf9 - Linux Memory Consumption - Nice article!
# See http://goo.gl/hFdNO - Memory and SuperCharging Overview ...or... "Why `Free RAM` Is NOT Wasted RAM!"
# See http://goo.gl/4w0ba - MFK Calculator Info - explanation for vm.min_free_kbytes.
#
# DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE!
#
# BEGIN OOM_MEM_Settings
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3584
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=14080
ro.SECONDARY_SERVER_MEM=14080
ro.BACKUP_APP_MEM=17920
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=17920
ro.EMPTY_APP_MEM=25600
# END OOM_MEM_Settings
# BEGIN OOM_ADJ_Settings
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
# END OOM_ADJ_Settings
# End of V6 SuperCharged Entries.
Sent from my GT-i9000 using XDA
To change the model NO. all you have to do is edit ro.product.model. To change it to the Galaxy S, change it to look like:
ro.product.model=GT-I9000
Note that Google market will still see your Gplayer as a 5.0, not as a galaxy S, but most apps (not sure about ones already installed), and websites (hello gameloft!), will recognise you as the modded product.model line.

[UPDATE][ALL][PORT][APP] Snapdragon Battery Guru

Hello .. As you know Friends this port of Snapdragon Battery Guru app from Xperia Z
And Now , I have fix a problem that sometimes , This apps says your device is incompatible though you have also followed my earlier instructions
hmm .. In This update I have new line in build.prop
1. Download this port from below..
2. You need to add Some lines to build.prop
3. Open Your File Manager with Root enable
4. Now go to system and open build.prop .. add this lines in it :-
Be Careful Dont play with these lines...
Code:
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
5. Also you have to change a bit thing in build.prop
Rename ro.product.board to MSM8960
like this :-
Code:
ro.product.board=MSM8960
6.Instructions to install this app
--------------------------------------------------------------------------------
Friends ...
Make Sure That You Have Added Lines That I Have Posted
If Yes then Go Ahead with next step
Reboot phone and Open Given Zip
Go to system , then app , then you will get app of Battery Guru
What You Have Do With That App . That Just Simply Install This App .. As You Install A Normal App
Visit This site to download this port :-
http://www.4shared.com/zip/R4IoW1VO/Snapdragon_Battery_Guru_By_Noe.html?
For more ports and mods
http://xperiasola.blogspot.in/
This is third time you have posted this here
Nope..
DavidMKD said:
This is third time you have posted this here
Click to expand...
Click to collapse
Find the other thread
hm you will not find it ..
and also read the title [UPDATE]
I Have added new improvements
Thanks ...
NoelMacwan said:
Hello .. As you know Friends this port of Snapdragon Battery Guru app from Xperia Z
And Now , I have fix a problem that sometimes , This apps says your device is incompatible though you have also followed my earlier instructions
hmm .. In This update I have new line in build.prop
1. Download this port from below..
2. You need to add Some lines to build.prop
3. Open Your File Manager with Root enable
4. Now go to system and open build.prop .. add this lines in it :-
Be Careful Dont play with these lines...
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
5. Also you have to change a bit thing in build.prop
Rename ro.product.board to MSM8960
like this :- ro.product.board=MSM8960
6.Instructions to install this app
--------------------------------------------------------------------------------
Friends ...
Make Sure That You Have Added Lines That I Have Posted
If Yes then Go Ahead with next step
Reboot phone and Open Given Zip
Go to system , then app , then you will get app of Battery Guru
What You Have Do With That App . That Just Simply Install This App .. As You Install A Normal App
Visit This site to download this port :-
http://www.4shared.com/zip/R4IoW1VO/Snapdragon_Battery_Guru_By_Noe.html?
For more ports and mods
http://xperiasola.blogspot.in/
Click to expand...
Click to collapse
Thanks a lot for this fix ..
i have tried and my problem is fixed
thanks a lot for the OP and this Update
I hope you will also do new things , im waiting for it
thanks .. :good:
NoelMacwan said:
Hello .. As you know Friends this port of Snapdragon Battery Guru app from Xperia Z
And Now , I have fix a problem that sometimes , This apps says your device is incompatible though you have also followed my earlier instructions
hmm .. In This update I have new line in build.prop
1. Download this port from below..
2. You need to add Some lines to build.prop
3. Open Your File Manager with Root enable
4. Now go to system and open build.prop .. add this lines in it :-
Be Careful Dont play with these lines...
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
5. Also you have to change a bit thing in build.prop
Rename ro.product.board to MSM8960
like this :- ro.product.board=MSM8960
6.Instructions to install this app
--------------------------------------------------------------------------------
Friends ...
Make Sure That You Have Added Lines That I Have Posted
If Yes then Go Ahead with next step
Reboot phone and Open Given Zip
Go to system , then app , then you will get app of Battery Guru
What You Have Do With That App . That Just Simply Install This App .. As You Install A Normal App
Visit This site to download this port :-
http://www.4shared.com/zip/R4IoW1VO/Snapdragon_Battery_Guru_By_Noe.html?
For more ports and mods
http://xperiasola.blogspot.in/
Click to expand...
Click to collapse
force close in my xperia go help me please this is my build promp
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Mon Sep 10 16:04:56 2012
ro.build.date.utc=1347285896
ro.build.user=BuildUser
ro.build.host=BuildHost
##### Final patch of properties #####
ro.build.product=ST27i
ro.build.description=ST27i-user 4.0.4 6.1.1.B.1.10 9bt3zw test-keys
ro.product.brand=SEMC
ro.product.name=ST27i_1265-8426
ro.product.device=ST27i
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/ST27i_1265-8426/ST27i:4.0.4/6.1.1.B.1.10/9bt3zw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1265-8426
ro.semc.version.cust_revision=R5G
persist.ro.ril.sms_sync_sending=1
#########################################################################
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA3
################# Updating of the SW Version #################
ro.semc.version.fs_revision=6.1.1.B.1.10
ro.build.id=6.1.1.B.1.10
ro.build.display.id=6.1.1.B.1.54
##### Values from product package metadata #####
ro.semc.product.model=ST27i
ro.semc.ms_type_id=PM-0090-BV
ro.semc.version.fs=WORLD
ro.semc.product.name=ST27i
ro.semc.product.device=ST27
ro.product.model=ST27i
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.incremental=ybt3zw
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.type=user
ro.product.board=montblanc
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=montblanc
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for lotus
#
rild.libpath=/system/lib/libu300-ril.so
rild.libargs=-c UNIX -n 2 -p /dev/socket/at_core -s /dev/socket/at_core -i rmnet
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version=131072
# debug.sf.hw=0 Use b2r2 as compositor in SurfaceFlinger
# debug.sf.hw=1 Use Mali as compositor in SurfaceFlinger
debug.sf.hw=1
# Android defaults EGL preserved swap behaviour
# This gives bad performace for deferred renderers
# such as Mali.
hwui.render_dirty_regions=false
# system props for Battery test in Service menu
ro.semc.batt.capacity=1500
ro.semc.batt.test.z_threshold=50
ro.semc.batt.test.min_level=70
# System props for SOLS
ro.semc.sols.product-code=98
ro.semc.sols.company-code=5
# STE: Low power audio - enable ULP mode
ste.nmf.autoidle=1
# prop to indicate what kind of external memory the product have.
ro.semc.product.user_storage=emmc_sdcard
ro.build.characteristics=default
# STE: Address of DBus STE bus
ste.dbus.bus.address=unixath=/dev/socket/dbus_ste
# STE: UNSOL_CALL_RING is only sent once from RIL.
# Android needs to generate more rings if needed.
ro.telephony.call_ring.multiple=true
#Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
#Limitation on how much hwmem MM codecs should use
ste.video.decoder.max.hwmem=0x2600000
ste.video.decoder.max.res=720p
ste.video.decoder.h264.max.lev=3.2
#STE: Hardware video codecs configuration
ste.video.dec.mpeg4.in.size=8192
ste.video.enc.out.buffercnt=5
ste.video.dec.recycle.delay=1
#STE: Fast Dormancy Flag
# Fast Dormancy based on USB Tether Events and Screen States
ste.special_fast_dormancy=false
# System props for audio
persist.audio.hp=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r5
ro.com.google.clientidbase=android-sonyericsson
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.semc.xloud.supported=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=44m
dalvik.vm.heapsize=44m
ro.sf.lcd_density=160
ro.am.max_recent_tasks=8
ro.usb.pid_suffix=17E
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
ro.drm.active.num=3
ro.drm.active.0=marlin,1
ro.drm.active.1=hdcp_av8100,1
ro.drm.active.2=playready,0
ro.media.enc.jpeg.quality=100
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=25
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
persist.sys.purgeable_assets=1
### Sony : Beats Audio props
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.alc.enable=1
af.resampler.quality=255
af.resample=42000
# Sony_Added Build Properties
#Bravia Engine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
#Graphics acceleration tweaks
debug.performance.tuning=1
video.accelerate.hw=1
#System tweaks
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.sys.purgeable_assets=1
#Smoother scrolling
ro.max.fling_velocity=120000
ro.min.fling_velocity=80000
view.scroll_friction=10
#Dalvik tweaks - Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
#Dalvik tweaks - Turn on Just In Time in dalvik virtual machine
dalvik.vm.execution-mode=int:jit
#Battery saving tweaks
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000
windowsmgr.max_events_per_sec=150
#Improve 3g data speeds
ro.ril.hsxpa=2
ro.ril.gprsclass=10
net.dns1=8.8.8.8
net.dns2=8.8.4.4
#Better net speeds.
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=524288,1048576,2097152,262144,524288,1048576
net.tcp.buffersize.hspa=4094,87380,704512,4096,16384,262144
net.tcp.buffersize.umts=4094,87380,563200,4096,16384,110208
net.tcp.buffersize.gprs=4094,87380,256960,4096,16384,110208
net.tcp.buffersize.edge=4094,87380,256960,4096,16384,110208
#Increase the volume steps in-call: 7 is default
ro.config.vc_call_steps=15
#Force Launcher Into The Memory
ro.HOME_APP_MEM=7680
ro.HOME_APP_ADJ=1
#Keep apps in memory - test
#
### Phone dialer app ###
sys.keep_app_1=com.android.sonyericsson.socialphonebook
### Launcher apps ###
sys.keep_app_1=com.sonyericsson.home # Sony Launcher
sys.keep_app_1=com.sonymobile.home.homeadd #Add widgets
### System apps ###
sys.keep_app_1=com.android.systemui # Status bar
sys.keep_app_1=com.android.settings # Settings menu
sys.keep_app_1=com.sonyericsson.music # Walkman app
# autogenerated by buildinfo.sh
ro.build.version.incremental=9bt3zw
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.type=user
ro.product.board=montblanc
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=montblanc
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for lotus
#
rild.libpath=/system/lib/libu300-ril.so
rild.libargs=-c UNIX -n 2 -p /dev/socket/at_core -s /dev/socket/at_core -i rmnet
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version=131072
# debug.sf.hw=0 Use b2r2 as compositor in SurfaceFlinger
# debug.sf.hw=1 Use Mali as compositor in SurfaceFlinger
debug.sf.hw=1
# Android defaults EGL preserved swap behaviour
# This gives bad performace for deferred renderers
# such as Mali.
hwui.render_dirty_regions=false
# system props for Battery test in Service menu
ro.semc.batt.capacity=1500
ro.semc.batt.test.z_threshold=50
ro.semc.batt.test.min_level=70
# System props for SOLS
ro.semc.sols.product-code=98
ro.semc.sols.company-code=5
# STE: Low power audio - enable ULP mode
ste.nmf.autoidle=1
# prop to indicate what kind of external memory the product have.
ro.semc.product.user_storage=emmc_sdcard
ro.build.characteristics=default
# STE: Address of DBus STE bus
ste.dbus.bus.address=unixath=/dev/socket/dbus_ste
# STE: UNSOL_CALL_RING is only sent once from RIL.
# Android needs to generate more rings if needed.
ro.telephony.call_ring.multiple=false
#Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
#Limitation on how much hwmem MM codecs should use
ste.video.decoder.max.hwmem=0x2600000
ste.video.decoder.max.res=720p
ste.video.decoder.h264.max.lev=3.2
#STE: Hardware video codecs configuration
ste.video.dec.mpeg4.in.size=8192
ste.video.enc.out.buffercnt=5
ste.video.dec.recycle.delay=1
#STE: Fast Dormancy Flag
# Fast Dormancy based on USB Tether Events and Screen States
ste.special_fast_dormancy=false
# System props for audio
persist.audio.hp=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r4
ro.com.google.clientidbase=android-sonyericsson
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.semc.xloud.supported=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
ro.sf.lcd_density=160
ro.am.max_recent_tasks=8
ro.usb.pid_suffix=17E
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#ro.service.swiqi.supported=true
#persist.service.swiqi.enable=1
ro.drm.active.num=3
ro.drm.active.0=marlin,1
ro.drm.active.1=hdcp_av8100,1
ro.drm.active.2=playready,0
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
# persist.sys.NV_FPSLIMIT=60 ~useless on our devices ,sorry
persist.sys.ui.hw=1
ro.vold.umsdirtyratio=20
ro.wmt.blcr.enable=0
# added tweaks
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
view.scroll_friction=10
windowsmgr.max_events_per_sec=280
ro.min_pointer_dur=8
ro.telephony.call_ring.delay=0
ring.delay=0
###AC!D Sound Tweaks by krabappel2548 R-ikfoot###
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
#Sony Xloud & Clearbass +
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.walkman.enable=1
ro.somc.clearphase.supported=true
persist.service.clearphase.enable=1
#Resampling
af.resampler.quality=255
persist.af.resampler.quality=255
persist.audio.samplerate=48000
persist.af.resample=52000
ro.audio.pcm.samplerate=48000
persist.dev.pm.dyn_samplingrate=1
#System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#Awesome Beats Engine
persist.audio.fluence.mode=endfire
persist.audio.hp=true
htc.audio.global.state=0
htc.audio.lpa.a2dp=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
persist.htc.audio.pcm.samplerate=44100
persist.htc.audio.pcm.channels=2
htc.audio.swalt.mingain=14512
htc.audio.swalt.enable=1
htc.audio.alc.enable=1
#Alsa driver
ro.sound.driver=alsa
ro.sound.alsa=snd_pcm
alsa.mixer.playback.master=Speaker
alsa.mixer.capture.master=Mic
alsa.mixer.playback.earpiece=Earpiece
alsa.mixer.capture.earpiece=Mic
alsa.mixer.playback.headset=Headset
alsa.mixer.capture.headset=Mic
alsa.mixer.playback.speaker=Speaker
alsa.mixer.capture.speaker=Mic
alsa.mixer.playback.bt.sco=BTHeadset
alsa.mixer.capture.bt.sco=BTHeadset
#SONY New Sound Enhancement + V4A Dual Audio Engine
#v5 - 1/Mac/2013
#Brought to you by [email protected]
#BRAVIA Engine 2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
#Audio tweaks
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.hp=true
#xLOUD, ClearAudio+, ClearPhase
ro.sony.walkman.logger=1
ro.semc.xloud.supported=true
ro.semc.enhance.supported=true
ro.semc.clearaudio.supported=true
ro.somc.clearphase.supported=true
ro.semc.sound_effects_enabled=true
#Activated by default
persist.service.xloud.enable=1
persist.service.walkman.enable=1
persist.service.enhance.enable=1
persist.service.clearaudio.enable=1
persist.service.clearphase.enable=1
#Audio Resampling Tweaks
af.resampler.quality=255
persist.af.resampler.quality=255
persist.audio.samplerate=48000
persist.af.resample=48000
#System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
Hello nealalfred19 , You Have done mistakes
1st of all you haven't edited ro.product.board
edit it to :- ro.product.board=MSM8960
2nd you have to copy this :-
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
under SOLS and space too Property Like this :-
# System props for SOLS
ro.semc.sols.product-code=98
ro.semc.sols.company-code=5
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
NoelMacwan said:
Hello nealalfred19 , You Have done mistakes
1st of all you haven't edited ro.product.board
edit it to :- ro.product.board=MSM8960
2nd you have to copy this :-
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
under SOLS and space too Property Like this :-
# System props for SOLS
ro.semc.sols.product-code=98
ro.semc.sols.company-code=5
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
Click to expand...
Click to collapse
i change the build.prop then now my phone is brick
---------- Post added at 12:36 AM ---------- Previous post was at 12:30 AM ----------
what will i do i brick my phone :crying:
always backup!!
just load your backup u did before u edited build.prop
nealalfred19 said:
i change the build.prop then now my phone is brick
---------- Post added at 12:36 AM ---------- Previous post was at 12:30 AM ----------
what will i do i brick my phone :crying:
Click to expand...
Click to collapse
Yes you can restore your previous backup... But above lines doesn't cause brick.. I have edited and my previous thread, so many members have also edited there build.prop.. As I have told to do
Sent from my C6603 using xda premium
now i just restore my preview back up what will i do to enable the battery guru
nealalfred19 said:
now i just restore my preview back up what will i do to enable the battery guru
Click to expand...
Click to collapse
Edit build.prop by your phone Only ,..don't by pc and pushing it to your phone.. If you 'll do so then you ll get boot loop...
Sent from my C6603 using xda premium
also FC on my experia go... :crying::crying:
hdmiacc said:
also FC on my experia go... :crying::crying:
Click to expand...
Click to collapse
What you did ?
already follow the step u give for the previous question for experia go...
bit the system show the pop up.. "unfortunately the battery guru has stop"
:crying:
hdmiacc said:
already follow the step u give for the previous question for experia go...
bit the system show the pop up.. "unfortunately the battery guru has stop"
:crying:
Click to expand...
Click to collapse
Did you added that lines in your build prop then did you have rebooted then installed app??
Sent from my C6603 using xda premium
Noel Macwan said:
Did you added that lines in your build prop then did you have rebooted then installed app??
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
i Follow this step
Noel Macwan said:
Hello nealalfred19 , You Have done mistakes
1st of all you haven't edited ro.product.board
edit it to :- ro.product.board=MSM8960
2nd you have to copy this :-
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
under SOLS and space too Property Like this :-
# System props for SOLS
ro.semc.sols.product-code=98
ro.semc.sols.company-code=5
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=false
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
Click to expand...
Click to collapse
Thanks A lot ... Works Perfectly in my miro
Nikunj Kubadia said:
Thanks A lot ... Works Perfectly in my miro
Click to expand...
Click to collapse
That's good
from battery guru.. its show.. device not support.. any advice ??

[Guide]How to make your own BUILD

Hi guys this Guide will show you how to make your own build of your system
You Need:
1-Root
2-Root explorer
Important:
Changing your build may cause to get a continues boot so if that happen to you reflash the zip
This zip is a flashable zip that made for xperia p users to restore there original build don't use it on other Model
Click here to download
Things you can change
ro.build.version.release=change the current Build version
ro.product.model=change your phone model
ro.product.brand=change your brand
Mods you can add:
Those info are taking from other ROM BUILD like DARK ROM or MOON ROM or NEUTRON v 1.9
Code:
#Graphics acceleration tweaks
debug.egl.hw=1
debug.compbypass.enable=1
dev.pm.dyn_samplingrate=1
debug.mdpcomp.maxlayer=3
debug.mdpcomp.logs=0
Code:
#Disable USB Debugging PopUp
persist.adb.notify=0
Code:
#Allow to free more ram
persist.sys.purgeable_assets=1
Code:
#Better Touchscreen Responsiveness
touch.pressure.scale=0.7
touch.size.bias=67.00
touch.size.scale=18.22
Code:
#Smoother video watching
video.accelerate.hw=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
If you want more Get Thise Rom Build and Read

Best build.prop tweaks 4.4.4 & 5.0.2 & 5.1.1 & 6.0.1 (updated-Jan2016)

This Thread is closed and no longer being updated
I've Started New Project (BT4A)
Check it out LINK [Updated]
Just For Rooted Devices​VPN and Security entrance FC bug , fixed​
The best build.prop tweak for Grand Prime 5.0.2 & 4.4.4
but Works for any smart phone running 4.3 & 4.4.2 & 4.4.4 & 5.0.1 & 5.0.2 & 5.1.1 & 6.0.1
​
Tested Devices :
SM-G530H/DV
SM-G530H/DS
SM-G530FZ
SM-G530BT
SM-G530F
SM-G530M
SM-G360
SM-G531 (all variants)
SM-S920L
S7582 S Dous 2
LG G2 (d801)
SM-G5308W
Idol 3
Redmi 3/Pro/S/S Prime /X
Almost all of devices:good:
Waiting for feedbacks ...
Before doing anything plz backup your main build.prop located in root/system/build.prop and save it on the PC
Here is some Enhancements:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (NEW2016)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- Qualcomm Tweaks
For Grand Prime:
1. Find this line"ro.pip.gated=0" at the end of build.prop as U can see its the last line
2. Copy all of these lines just below the "ro.pip.gated=0"
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
For other phones :
1. Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
#ADD
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.lge.proximity.delay=25
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
#security.mdpp=none
#security.mdpp.result=none
wifi.supplicant_scan_interval=220
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
#NEW
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
#End
U can Use Root Explorer app or notepad++ to edit your build.prop
Remember to set the permission to rw-r-r after editing ( If you don't do it your device gonna brick)
Technically it has to work with any phone with Android L but I am not responsible for any damage
Please always pay attention to risk of soft bricking
If something goes wrong use your backup build.prop to get the default settings
Does it work for your phone ? U tell me ( with details )
Send me feedbacks about your phone and I am gonna put it in the Tested List
XDA:DevDB Information
Best build.prop tweaks 4.4.4 & 5.0.2 & 5.1.1 (updated-Jan2016), Tool/Utility for the Samsung Galaxy Grand Prime
Contributors
adblocker
Version Information
Status: Stable
Current Stable Version: 1.2.1
Stable Release Date: 2015-11-01
Created 2015-08-27
Last Updated 2016-10-28
Reserved
Working great on my G530FZ
Hi.my phone is g530h.plz linke of lp rom for me. (To test this build prop)
Sent from my SM-N9005 using Tapatalk
G530 fz
Hello
G530 fz ?
Office. Fab said:
Hello
G530 fz ?
Click to expand...
Click to collapse
working !
roozbeh158 said:
Hi.my phone is g530h.plz linke of lp rom for me. (To test this build prop)
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Your Base band is HXX ! you got to wait for that !
working fine on my G530H
can someone make it flashable zip or something i copied all the lines but after reboot i stuck on black screen
Crimmy20 said:
can someone make it flashable zip or something i copied all the lines but after reboot i stuck on black screen
Click to expand...
Click to collapse
I think u didn't change the permissions ! please change the permissions after editing to rw-r-r or 0644 with the app
do i need set permissions to the build.prop file or for the system folder? and if i made changes app just backed up my original build.prop should i need to delete it ? sorry for my silly questions
G530BT?
This should go in general section not here.
it wont work on kitkat right ?
sorry im just new to this
AJexplorer said:
it wont work on kitkat right ?
sorry im just new to this
Click to expand...
Click to collapse
working on the kitkat too
Crimmy20 said:
do i need set permissions to the build.prop file or for the system folder? and if i made changes app just backed up my original build.prop should i need to delete it ? sorry for my silly questions
Click to expand...
Click to collapse
just the build.prop file !
set it to rw-r-r
math_natividade said:
G530BT?
Click to expand...
Click to collapse
should work ! but I am not sure :0
adblocker said:
should work ! but I am not sure :0
Click to expand...
Click to collapse
How about SM-G530H?
genesisbaliw said:
How about SM-G530H?
Click to expand...
Click to collapse
Working 100%
dcduartee said:
Working great on my G530FZ
Click to expand...
Click to collapse
Confirm!It works well in my G530FZ
Tanks
:good:

Build Props Tweaks

Build Props Tweaks [For both rooting method (System & Systemless)]
Code:
I am NOT responsible for bricked devices, destroyed SD cards or any
damage that may happen to your device.
We need to add this code to the end of file "/system/build.prop"
I will add complete information in the future about these codes!
I try these in Lineage OS 17.1 and give good results!
To begging these tweaks:
1- Enable adb from developer options.
2- In recovery mode mount System partition and connect your USB to your computer!
3- Open your computer terminal and type this (to pull(download) the file "/system/build.prop" to your Desktop):
adb pull /system/build.prop ~/Desktop/build.prop
4- Now come to your Desktop and first take a backup from this file then open the file "build.prop" with text editor and add all below codes to the end of file "build.prop" then save it! (don't try to edit other lines!)
Code:
#----------------------------------
# Start
#----------------------------------
# Audio enhancer
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=true
persist.audio.handset.mic=digital
af.resampler.quality=255
mpq.audio.decode=true
#----------------------------------
# Call delay
ro.telephony.call_ring.delay=800
#----------------------------------
# Video acceleration enabled
video.accelerate.hw=1
#----------------------------------
# Wifi scaning rate [every 60 --> 1 scan / min]
wifi.supplicant_scan_interval=180
#----------------------------------
# Deeper sleep/better battery life [for extrimmly power save] [kills all background apps]
ro.ril.disable.power.collapse=1
# pm.sleep_mode=1
#----------------------------------
# Improves audio and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.camcorder.videoModes=true
#----------------------------------
# Picture Quality Enhancer
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
#----------------------------------
# Disable Boot Animation [for Enable set 0]
debug.sf.nobootanimation=1
#----------------------------------
# Disable Camera Sound
ro.camera.sound.forced=0
#----------------------------------
# Better Scrolling
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
windowsmgr.max_events_per_sec=60
#----------------------------------
# Disable strict mode checking
persist.android.strictmode=0
#----------------------------------
# Remain launcher in memory
ro.HOME_APP_ADJ=1
#----------------------------------
# Disable usb debugging popup in notification
# persist.adb.notify=0
#----------------------------------
# Proximeter delays
ro.lge.proximity.delay=25
mot.proximity.delay=10
#----------------------------------
# media enhancer [codecs]
ro.media.dec.aud.flac.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.avi.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.mp3.enabled=1
ro.media.dec.vid.mp4.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.H.264.enabled=1
ro.media.enc.aud.flac.enabled=1
ro.media.enc.vid.H.264.enabled=1
ro.media.enc.aud.wma.enabled=1
ro.media.enc.vid.wmv.enabled=1
ro.media.enc.aud.mp3.enabled=1
ro.media.enc.vid.mp4.enabled=1
#----------------------------------
# Improved performance
debug.performance.tuning=1
#----------------------------------
# DNS Servers [Quad9 & Cloudflare]
net.dns1=9.9.9.9
net.dns2=149.112.112.112
net.dns3=1.1.1.1
net.dns4=1.0.0.1
net.wlan0.dns1=9.9.9.9
net.wlan0.dns2=149.112.112.112
net.wlan0.dns3=1.1.1.1
net.wlan0.dns4=1.0.0.1
net.eth0.dns1=9.9.9.9
net.eth0.dns2=149.112.112.112
net.eth0.dns3=1.1.1.1
net.eth0.dns4=1.0.0.1
net.wcdma.dns1=9.9.9.9
net.wcdma.dns2=149.112.112.112
net.wcdma.dns3=1.1.1.1
net.wcdma.dns4=1.0.0.1
net.hspa.dns1=9.9.9.9
net.hspa.dns2=149.112.112.112
net.hspa.dns3=1.1.1.1
net.hspa.dns4=1.0.0.1
net.lte.dns1=9.9.9.9
net.lte.dns2=149.112.112.112
net.lte.dns3=1.1.1.1
net.lte.dns4=1.0.0.1
net.ltea.dns1=9.9.9.9
net.ltea.dns2=149.112.112.112
net.ltea.dns3=1.1.1.1
net.ltea.dns4=1.0.0.1
#----------------------------------
# Better Network Signals
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#----------------------------------
# Better call voice quality
ro.ril.enable.amr.wideband=1
#----------------------------------
# Faster streaming videos
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
#----------------------------------
# Disables built in error reporting
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#----------------------------------
# Disables kernel error checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#----------------------------------
# Disable Logcat
logcat.live=disable
#----------------------------------
# Disables sending of usage data
ro.config.nocheckin=1
#----------------------------------
# Boost Booting Speed & hibernate mode
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#----------------------------------
# Very fast reboot
persist.sys.purgeable_assets=1
#----------------------------------
# Disables locating
ro.com.google.locationfeatures=0
ro.com.google.networklocation=0
#----------------------------------
# Net speed enhancer[tcp buffersize]
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
#----------------------------------
# For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#----------------------------------
# DHA tunning
ro.config.dha_tunnable=1
#----------------------------------
# Faster Boot-Animation FPS
# boot.fps=20
#----------------------------------
# END
#----------------------------------
5- Now we must push(upload) new file "build.prop" by typing this command in your terminal:
adb push ~/Desktop/build.prop /system/build.prop
If you have a problem with these tweaks use backup file to restore your first file "/system/build.prop"
If you have any suggestion to improve this thread please tell me!
Thanks for your contribution
Works on stock rom without root?
ehbm said:
Works on stock rom without root?
Click to expand...
Click to collapse
No, it's not work!

Categories

Resources