Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What's working:
Boots
RIL (Calls, SMS, Data)
WiFi
Bluetooth
Audio
Video Playback
Sensors
Flashlight
GPS
Notification Slider
Off screen gestures
Camera
Known issues:
None
Bug Reporting:
Do not report any bugs here except for features under testing.
Features:-
-4k video recording
-40%-50% louder mic volume. (under testing)
Q Timelapse/Slow motion recording not working
A Use OOS stock camera.
Downloads:
LineageOS 18.1
Gapps
Recovery - TWRP 3.2.3 14.02.2019
Special Thanks
@lineageos
XDA:DevDB Information
LineageOS 18.1, ROM for the OnePlus X
Contributors
psychem
Source Code: https://github.com/YumeMichi/device_oneplus_onyx
https://github.com/YumeMichi/kernel_oneplus_onyx
https://github.com/YumeMichi/proprietory_vendor_oneplus
ROM OS Version: Android 11
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2021-02-19
Awesome..R on Onyx!
btw I'm using latest core nikgapps, contact sync on account not showing, pls advice thx in advance, g maps also keep stopping
Surefive said:
Awesome..R on Onyx!
btw I'm using latest core nikgapps, contact sync on account not showing, pls advice thx in advance, g maps also keep stopping
Click to expand...
Click to collapse
Opengapps 11 beta pico
mponyx said:
@psychem:
First of all, thank you very much for your work and porting Android 11 to our beloved Onyx I've used your Android 10 ROM before, which went absolutely great. Now I've switched to your new one. Runs absolutely stable, the only thing that is (still) missing is the option to swap the lower hardware buttons, or Android Auto does not want to connect to my Mazda ... That worked great with the Android 10 ROM. Maybe you have the possibility to add these two things with a future update? Greetings, mponyx
Click to expand...
Click to collapse
I dirty flashed over 17.1 , don't have these issues, buttons are as I like them to be. Try dirty flashing.
Great work, @psychem !
Truly appreciate your work.
Thank you for a good ROM.
I have found a bug, if I run the Screen Cast, android is crashing.
Liolyk L said:
Thank you for a good ROM.
I have found a bug, if I run the Screen Cast, android is crashing.
Click to expand...
Click to collapse
works fine
Hi, one bug I found, sometimes phone restart itself, and it had problem connect do SD card, i try different card, but problem still exist. I use sd card like expanded storage, for apps and tec, and after restart it have long loading card, and never put back icons on homescreen...how to fix it pls? thank you
Thank you for your work it's great. How to change saving photos to SD card?
mponyx said:
@psychem:
First of all, thank you very much for your work and porting Android 11 to our beloved Onyx I've used your Android 10 ROM before, which went absolutely great. Now I've switched to your new one. Runs absolutely stable, the only thing that is (still) missing is the option to swap the lower hardware buttons, or Android Auto does not want to connect to my Mazda ... That worked great with the Android 10 ROM. Maybe you have the possibility to add these two things with a future update? Greetings, mponyx
Click to expand...
Click to collapse
You could use Button Mapper pro for the time being, it can swap the hardware buttons.
I'm missing the option to force close apps in developer settings? Or is that an android 11 thing?
Oh nice !
Thank you to maintain our sweet Oneplus X.
Is it possible to have some screenshots of the rom or maybe a video ?
Thanks for keeping the phone alive. I've installed the image a few days ago and it generally seems to work fine so far. There are a couple of minor issues - some of them mentioned already (e.g. can't seem to find a way to swap the hardware buttons). Topic for another time, they don't bother me much.
However, a more major problem is perhaps related to the tweaks to microphone volume: it appears too loud, and it also sounds like noise cancellation is disabled: all surrounding noise is making it to the person I'm talking to. Any hints on how to enable this?
Hello ; thanks for this good work !
Like tbodor, i experience very poor microphone quality.
Hard to be understood on the other side.
Regards
rahan56 said:
Hello ; thanks for this good work !
Like tbodor, i experience very poor microphone quality.
Hard to be understood on the other side.
Regards
Click to expand...
Click to collapse
I have since rolled back the volume changes and no one is complaining about code quality anymore. To be fair I think they said it's not quite as good as it was with my previous version (14.1), but definitely usable.
I suspect noise suppression is calibrated for original volumes and changing them breaks that calibration.. but I don't really understand how audio works and don't really have time to learn.
Thanks for you update.
Can you describe how you reverted the volume changes, please ?
It is an edit to do on /system/vendor/etc/mixer_paths.xml ?
I saw threads on this, replacing speaker-mic with another reference (dmic1 ?) :
<path name="voice-speaker-mic">
<path name="speaker-mic" />
</path>
speaker-mic has volumes at 108 (DEC3, DEC4) ; i honestly know nothing about all of that.
i changed /system/vendor/audio/audio_platform_info.xml from
<device name="SND_DEVICE_IN_SPEAKER_MIC" acdb_id="11" />
to
<device name="SND_DEVICE_IN_SPEAKER_MIC" acdb_id="42" />
and apparently, sound is much better in speaker mode.
cf https://github.com/YumeMichi/device...e3657ddfcbcafe39d12e3f0397836d6400bdb0c24cc80
Hi,
I have just installed and I don't know how to exchange the back button and the recent apps button.
Is there the possibility?
rahan56 said:
Thanks for you update.
Can you describe how you reverted the volume changes, please ?
It is an edit to do on /system/vendor/etc/mixer_paths.xml ?
I saw threads on this, replacing speaker-mic with another reference (dmic1 ?) :
<path name="voice-speaker-mic">
<path name="speaker-mic" />
</path>
speaker-mic has volumes at 108 (DEC3, DEC4) ; i honestly know nothing about all of that.
Click to expand...
Click to collapse
Hi.. I actually uploaded the mixer_paths.xml from my backup. But that is effectively the same as the one here: https://raw.githubusercontent.com/YumeMichi/device_oneplus_onyx/lineage-18.1/audio/mixer_paths.xml, so you can use that. I didn't rebuild the image, just changed it directly on the phone (adb in root mode, remount / as read write, then adb push to /system/vendor/etc/mixer_paths.xml, reboot - not sure if it's needed, but I did just in case).
If you extract the one from the image linked in the original post and compare to the one from github you will see the volume differences. Reverting to the old one seems to bring the volumes back into the range expected by the calibration.
As for the acdb, I think the DMIC one already gets selected correctly, so not sure what your change does there and why it ends up being better. I've looked at my logs and I can see that at the start of a voice call, I seem to get the correct acdb - one with dual mic support. I also don't know much about this, I'd afraid. I am only guessing from a few hours' worth of research.
lovechii said:
Hi,
I have just installed and I don't know how to exchange the back button and the recent apps button.
Is there the possibility?
Click to expand...
Click to collapse
I'd also like to know; I am used to the back button on the left. It's possible to swap them if you use on screen buttons, but for hardware buttons - no idea. I am slowly getting used to the 'wrong' layout, it's a minor annoyance. But if someone knows how to swap them, that would be great.
Related
I noticed there was no active development that was trying to get the standard AOSP build working, which I really would like to use as my day to day ROM....so I decided to give it a shot. Feel free to help
I use the Ninphetamine kernel and a clockwork recovery initramfs. The initramfs has been altered and will not boot with other ones. This is because of a missing socket that the older init.rc doesn't make.
I'll be using the next post to describe what I'm working on and update it with any useful info I find.
Currently it's in an unusable state, here's where it stands:
Working
Making calls
SMS
Audio
Internet (Data Connection)
Note: When you open browser, it will crash because google's home page try's to use location services, you need to navigate away quickly in order for it not to crash.
Proximity Sensor
Internal Storage
microSD Storage
Vibration
Camera
USB Transfer with Internal Storage
Untested
Other Sensors
TV Out (doubtful)
Not Working (yet)
WiFi (don't even turn this on, it will reboot endlessly) <-- working on it
Camcorder
Bluetooth
GPS
USB Transfer with microSD (not a huge priority)
I know that cyanogenmod is pretty darn close to AOSP and that I'm duplicating work, but I'm doing it anyways.
If you want to try it out:
Binaries:
CWM Kernel Zip
CWM AOSP Zip
Note: Obviously you need to wipe.
Sources:
https://github.com/nemasu/
Working on WiFi
no notes yet
nemasu said:
I noticed there was no active development that was trying to get the standard AOSP build working, which I really would like to use as my day to day ROM....so I decided to give it a shot. Feel free to help
Click to expand...
Click to collapse
AdamG has made devnull (http://forum.xda-developers.com/showthread.php?t=1183063&highlight=devnull) which is basicly the AOSP build. Some stuff not working though as the CM7 team has not managed to get audio over bluetooth working.
He has also started the Oxygen development. The oxygen thread is here: http://www.forums.acsyndicate.net/showthread.php/1591-ROM-AOSP-GRJ90-2.3.5-Oxygen-v2.2.1
Good to hear others working on this too, hope you manage to get bluetooth audio issue sorted and perhaps help other AOSP / CM7 devs with that issue.
Pume said:
AdamG has made devnull (http://forum.xda-developers.com/showthread.php?t=1183063&highlight=devnull) which is basicly the AOSP build. Some stuff not working though as the CM7 team has not managed to get audio over bluetooth working.
He has also started the Oxygen development. The oxygen thread is here: http://www.forums.acsyndicate.net/showthread.php/1591-ROM-AOSP-GRJ90-2.3.5-Oxygen-v2.2.1
Good to hear others working on this too, hope you manage to get bluetooth audio issue sorted and perhaps help other AOSP / CM7 devs with that issue.
Click to expand...
Click to collapse
Ah, yeah, I forgot about that one. I'll be leaving it completely stock AOSP though (when it works well anyways). Might speed things up for me a bit. I am doing this as a sort of hobby too, interesting to learn how it works.
EDIT: It WILL speed things up a great deal....DevNull did some great work.
search for the Oxygen ROM on google.
it's a rom for SGS2 where everything works, and it's only AOSP.
http://forum.oxygen.im/index.php
All the same, great work mate, we need more AOSP ROM's, since AdamG has taken a break due to personal reasons it's nice for another dev to take the helm.
Good luck mate, all the best.
nesquix said:
search for the Oxygen ROM on google.
it's a rom for SGS2 where everything works, and it's only AOSP.
http://forum.oxygen.im/index.php
Click to expand...
Click to collapse
Does A2DP work on Oxygen?
Sent from my CM7 powered SGS2
This xda members...
AdamG did great work yes but it does not preclude to new AOSP roms.
Keep your respected work.
Edit: If AdamG had taken a break, maybe you should think to fork devnull. This speeds up work and you can focus another thinks etc A2DP and tvout. Its open source
I have been using CM7 as well as Devnull/Oxygen and I felt Oxygen was very stable, while CM7 26 was the most stable for me while 31 made my me turn back to Oxygen.
My sincere request, kindly take over from where Adam left Will be a great boon for us!
bluheart said:
I have been using CM7 as well as Devnull/Oxygen and I felt Oxygen was very stable, while CM7 26 was the most stable for me while 31 made my me turn back to Oxygen.
My sincere request, kindly take over from where Adam left Will be a great boon for us!
Click to expand...
Click to collapse
Agree......
Sent from my GT-I9100 using Tapatalk
Keep up the good work!
Nice work buddy
I turn my back for 1 day and you're nearly done! Keep it up
does it have a aosp lockscreen only?
Always nice to see more AOSP love will be keeping an eye on this, good luck man no wifi would be a dealbreaker for me ATM..
wliu88 said:
does it have a aosp lockscreen only?
Click to expand...
Click to collapse
yup, I've added nothing to it, pure aosp.
Hi! I'm trying to reproduce this compilation but no success. It stucks with a lot of libs errors. Any idea? I'm using a little modified device configuration from android_device_samsung_galaxys2.
Sent from my GT-I9100 using XDA App
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
#include
Your warranty is now void!
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Submitting bug reports on nightly builds is the leading cause of male impotence.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/
Instructions:
Your device will need to be rooted and have custom recovery before proceeding. Please check your device forum for instructions.
First time flashing CyanogenMod 12 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Already on CM12, try a dirty flash.
Reboot into recovery
Make back up <optional>
Wipe cache, system, dalvik-cache
Install ROM, GApps and optional Superuser app
Reboot
Download: CM12 nightly builds
Basketbuild - HERE
AndroidFileHost - HERE
Goo.im - HERE
There have been issues with Goo.im lately, if your download is corrupt or install fails then try the Basketbuild mirror.
Google Apps: Optional add on package that allows Google Play services such as Google Play Store and other Google Apps outside of AOSP based ROMs.
Check THIS post
Changelog:
CyanogenMod Change Log HERE
G3 Specific Change Log HERE
AndroidUser00110001 Change Log HERE
invsisblek Change Log HERE
GitHub - Source Code:
GitHub - CyanogenMod
GitHub - AndroidUser00110001
GitHub - invsisblek
Credits:
Thanks to all sent Paypal!!!
CyanogenMod
Thanks to @invisiblek for the work he has done on device trees.
Thanks to @timmytim for all of his work in getting CM11/12 to where it is now.
Thanks to @Cuzz1369 for all of his work on the d852 device tree.
Thanks to everyone who I have not mentioned yet...hard to keep track of XDA names and hangout names
Team Codefire for root.
TWRP for their awesome recovery.
Change Log & Other info
Personal Disclaimer:
I am the CM12 device maintainer for D850 so thought I would make this for the D852 users. It should be on par with the CM12 for AT&T G3.
I do not have this device in hand so bugs may take longer to resolve.
Whatever donations I get from this will go towards device so I can have one in hand to build with. If you happen to have a d852/5 for a fair deal then maybe we can work something out...
Bugs:
For proper technique on reporting bugs:
Read THIS and THIS.
When reporting a bug be as specific as possible, make sure you can replicate the issue coming from a clean install and that no other apps are causing the issue. Do not have any modifications done to the Android system besides the installation of GApps with out any other tweaks applied or apps installed. Provide a logcat if possible and make sure you are reporting on the latest build. This will make my job of trying to squash bugs a lot easier.
First! Thx u.. Cant wait to see the official name tag
What is the difference betweeen your build and Manups4e one?
Both are for D855.
Thanks
When i listen to music over bluetooth when i turn up the volume on the phone it gets very loud on the stereo. Blowing my Speakers up.. Common aosp bug?
Sent from my LG-D855 using XDA Free mobile app
pulcinella75 said:
What is the difference betweeen your build and Manups4e one?
Both are for D855.
Thanks
Click to expand...
Click to collapse
Not sure since I never ran it. I was asked to start making nightly ROMs for the D855 so I am... If it is causing any issues then I can just drop it. I am part of the group of devs working on the G3 device tree so I am looking to finalize the hardware side so we can push the device tree to CM.
Mennooo said:
When i listen to music over bluetooth when i turn up the volume on the phone it gets very loud on the stereo. Blowing my Speakers up.. Common aosp bug?
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Have not noticed it but will look into it.
Please do NOT drop it, @AndroidUser00110001, I beg you!
Having an actual device maintainer here offering his time and work is awesome!
tobitege said:
Please do NOT drop it, @AndroidUser00110001, I beg you!
Having an actual device maintainer here offering his time and work is awesome!
Click to expand...
Click to collapse
Thanks...It's all good
Will have today's build up in about an hour.
I was not asking you to drop it. Only asking what are differences.
If it is a step towards official CM you are very welcome.
Yikes, out of thanks for today... @AndroidUser00110001 try this: 8DN66510WB1214140
tobitege said:
Please do NOT drop it, @AndroidUser00110001, I beg you!
Having an actual device maintainer here offering his time and work is awesome!
Click to expand...
Click to collapse
I will second this
Looking forward to see future updates.
Not sure if its a coincidence but is 00110001=1?
Helloworld294 said:
Not sure if its a coincidence but is 00110001=1?
Click to expand...
Click to collapse
It is
I am building for you guys so don't worry. I got a donation from a D855 user so now I am obligated too I would have anyways...
My machine is building today's version now. Will be up in an hour or so.
Is anyone having trouble seeing 5G WiFi networks?
what Device sources are you using?
Any chance of getting magnetic sensor to work for circle cover and other flip covers?
AndroidUser00110001 said:
Is anyone having trouble seeing 5G WiFi networks?
Click to expand...
Click to collapse
Nope, i see mine But i got problem with BT sound blowing my Speakers up.
Sent from my LG-D855 using XDA Free mobile app
bunny0007 said:
Any chance of getting magnetic sensor to work for circle cover and other flip covers?
Click to expand...
Click to collapse
Does it not work now? I thought it was being worked on, maybe the commit has not been merged yet. Will look into it.
Mennooo said:
Nope, i see mine But i got problem with BT sound blowing my Speakers up.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Does the volume start too loud?
Mennooo said:
Nope, i see mine But i got problem with BT sound blowing my Speakers up.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
when you start turning it up about 3/4 volume the volume start normal and then cranks up stupidly high lol
AndroidUser00110001 said:
Does it not work now? I thought it was being worked on, maybe the commit has not been merged yet. Will look into it.
Does the volume start too loud?
Click to expand...
Click to collapse
If i higher the volume over ~70% on the phone the volume is rising even if i lower it again so i have to turn it off. And the sound aint nice, its cracky and sounds aweful when it goes up. It was the same on liquidsmooth and ive tried it with my car, home stereo and a bluetooth speaker. All the same.
Sent from my LG-D855 using XDA Free mobile app
Edit1: This issue have workaround found to be raliable-ish, see post 6.
Edit2: I've figured it out, see post 12.
Greetings!
My device is Redmi Note 4X black 3/32GB. I have an issue with the microphone not working, but only during phone calls and only when using the built-in earpiece for communication. Switching to loudspeaker mode or plugging hands-free makes it work again.
This issue is reproducible only on custom AOSP based ROMs, but works as expected on Mi A1 ported ROM and on official and customized MIUI.
It's kinda strange, because some guys here don't encounter such problems with either the RN4(SD) or the RN4X(SD), both code-named "mido".
nasko_spasko said:
Greetings!
My device is Redmi Note 4X black 3/32GB. I have an issue with the microphone not working, but only during phone calls and only when using the built-in earpiece for communication. Switching to loudspeaker mode or plugging hands-free makes it work again.
This issue is reproducible only on custom AOSP based ROMs, but works as expected on Mi A1 ported ROM and on official and customized MIUI.
It's kinda strange, because some guys here don't encounter such problems with either the RN4(SD) or the RN4X(SD), both code-named "mido".
Click to expand...
Click to collapse
Read this : https://forum.xda-developers.com/re...dia-sounds-t3682812/post74247791#post74247791
sachin n said:
Read this : https://forum.xda-developers.com/re...dia-sounds-t3682812/post74247791#post74247791
Click to expand...
Click to collapse
Thanks! I'll try and report, but I have issue with the mic, not the speaker.
nasko_spasko said:
Thanks! I'll try and report, but I have issue with the mic, not the speaker.
Click to expand...
Click to collapse
Oh, nvm! Sorry.
I have same problem and dont find a solution.
I've found some sort of a workaround for this issue. The problem described in the thread is kinda different than mine, but seems to fix my problem too. It's in this XDA thread. All i did was flashing the two zip files from zile995: fix-audio-*-zile995.zip at the bottom of the OP.
As I said, this is a workaround, not a fix. If you know some of the maintainers for the device tree for LOS, feel free to mention them in this thread. I could make a fix proposal miself, but I don't have the time to invest in this. However if no progress is observed in the next couple of week, maybe I'll try to make it work and propose a fix to be pushed to upstream, so no more dirty flashes of patches to be required for the mic to work properly during a phone call.
Ok i will test too.
Edit: I have test and its work but i dont have lte and the other side say the volume is very low.
Schrotty35 said:
Ok i will test too.
Edit: I have test and its work but i dont have lte and the other side say the volume is very low.
Click to expand...
Click to collapse
Tested ot on LOS 14.1 and RR Nougat, in my case LTE works and the other guy says it's too loud. How come?
I have test with latest rr too. I dont know what is the problem. In the other Thread i have see there is a v6. I will test with this. Have you install both fix after install Rom direct?
Schrotty35 said:
Have you install both fix after install Rom direct?
Click to expand...
Click to collapse
Yup! It's not necessary, though. Flashing the v2 version is sufficient in my case. build.prop version does nothing. I'll play with it further during the weekend.
Cheers!
I have found a good fix which work for me.
You found it here https://forum.xda-developers.com/showthread.php?t=3630473
Done, fugured it out
Greetings, ppl!
I know it's been a while, but I've finally figured it out.
The property 'persist.vendor.audio.fluence.voicecall' should be set to 'false' instead of 'true'.
In the Official and all MIUI based ROMs it's set to false, but in all AOSP based ones it's set to true, which breaks in-call audio for alot of people, at least the ones with newer revisions of the board. So next I'll try to fork the device tree from the LOS project and modify it accordingly and build the ROM with it and see if it finally works out of the box.
Oh, such a relief! The mic finally works when calling people.
Could you please try and report? You're not supposed to, though. Flashing roms and testing configs can be annoying sometimes.
Happy holidays!
nasko_spasko said:
Greetings, ppl!
I know it's been a while, but I've finally figured it out.
The property 'persist.vendor.audio.fluence.voicecall' should be set to 'false' instead of 'true'.
In the Official and all MIUI based ROMs it's set to false, but in all AOSP based ones it's set to true, which breaks in-call audio for alot of people, at least the ones with newer revisions of the board. So next I'll try to fork the device tree from the LOS project and modify it accordingly and build the ROM with it and see if it finally works out of the box.
Oh, such a relief! The mic finally works when calling people.
Could you please try and report? You're not supposed to, though. Flashing roms and testing configs can be annoying sometimes.
Happy holidays!
Click to expand...
Click to collapse
i have exactly same problem
already wrote here in this sub forum without any response from the members here
will try today at the office and report to you later
thank you for sharing
done editing to false, now incall is nice but i hear low voice from other party in speakerphone mode although volume is full. ?
but it was more than enough since i dont use speakerphone mode that much
really appreciate your finding my friend
groovepeppy said:
done editing to false, no incall is nice but i hear low voice from other party, volume is full.
Click to expand...
Click to collapse
have you tested it on clean isntall? I mean no other patches applied?
nasko_spasko said:
have you tested it on clean isntall? I mean no other patches applied?
Click to expand...
Click to collapse
pardon me, the connection is bad over here
i believe i have edited my post because it was full of typos but it turns out its not edited yet.
please re-read the post you have quoted.
fyi, i clean flashed PixelExperience 8.1 ROM right after i arrived at work
setting this and that, root the phone using latest Magisk, install Root Explorer and did what you have wrote on post #12 and yes, i did not use any patch, just your workaround
Reboot the phone, test calling and i smile very wide.
one thing i found, setting up Google Assistant can't be done
it told me to say "Ok Google" but the app didn't hear me
so i change all of the "almost identical" line to false, like this....
persist.vendor.audio.fluence.voicecall=false
persist.vendor.audio.fluence.voicerec=false
persist.vendor.audio.fluence.speaker=false
Click to expand...
Click to collapse
Google Assistant recognize my voice now
But the speakerphone mode stay the same, the voice from the other end aren't loud enough.
once again say thanks to you for your effort
feel happy that i'm not the only one suffering this problem LOL
I still face the issue after editing build prop..
hi @nasko_spasko
I'm getting a bit irritated by this phone
How come i am (maybe with you too) the only one having this problem
Last night i look at latest xiaomi.eu build prop and i decide to get all audio related lines and overwrite the related lines in pixel experience's rom build.prop
crossing my finger here, wish me luck man
edit:
still i get very small volume for speakerphone mode
anybody knows how to gain the speakerphone output level?
@nasko_spasko
finally i fixed it
mic working fine in call
loud speakerphone
i did what he told me here.....
https://forum.xda-developers.com/showpost.php?p=74000643&postcount=210
change fluencetype to none and add one line in audio_platform_info.xml
reboot
works like a charm
by the way, i still use pixel experience rom.
groovepeppy said:
@nasko_spasko
finally i fixed it
mic working fine in call
loud speakerphone
i did what he told me here.....
https://forum.xda-developers.com/showpost.php?p=74000643&postcount=210
change fluencetype to none and add one line in audio_platform_info.xml
reboot
works like a charm
by the way, i still use pixel experience rom.
Click to expand...
Click to collapse
Thanks for lot! But, can you write the line to add in audio_platform_info.xml?
I'm in pixel experience too.
See here for disclaimer and FAQs
Installation and download instructions are available on the wiki
Downloads are here
For help with Sprint, see here
XDA:DevDB Information
LineageOS 14.1 for Galaxy S5 Sport, ROM for the Sprint Samsung Galaxy S5
Contributors
javelinanddart
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: G860PVPU2BOK1
Version Information
Status: Nightly
Created 2017-12-30
Last Updated 2017-12-30
Reserved
Reserved
Just wanted to say thanks for this!
I use this phone with hangouts dialer on wifi when I'm out working (leaving my good, fragile phone safe in the house). I was using the old cyangenmod 13 rom because it was the only one that would work without missing sim errors.
This rom works perfectly for my needs, again, thanks!
javelinanddart said:
See here for disclaimer and FAQs
Installation and download instructions are available on the wiki
Downloads are here
For help with Sprint, see here
XDA:DevDB Information
LineageOS 14.1 for Galaxy S5 Sport, ROM for the Sprint Samsung Galaxy S5
Contributors
javelinanddart
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: G860PVPU2BOK1
Version Information
Status: Nightly
Created 2017-12-30
Last Updated 2017-12-30
Click to expand...
Click to collapse
Is this rom still being actively developed? I'm interested in testing if so.
FanboyStudios said:
Is this rom still being actively developed? I'm interested in testing if so.
Click to expand...
Click to collapse
EDIT: Oops, wrong thread. It's stable, I'm not working on 14.1 right now.
javelinanddart said:
EDIT: Oops, wrong thread. It's stable, I'm not working on 14.1 right now.
Click to expand...
Click to collapse
I found an issue, the stock equalizer does not seem to work at all. Also tried to install V4A and it does not work either (I suspect it's Samsung's fault with the problematic Samsung Knox). Screen recording seems to be buggy and 5GHz hotspot don't work (2.4 GHz works fine). Other than that I haven't found any other issues. Video recording works fine.
Edit: Stock equalizer seems to work on all my audio files (.wav, .flac, .m4a), except .mp3 files.
FanboyStudios said:
I found an issue, the stock equalizer does not seem to work at all. Also tried to install V4A and it does not work either (I suspect it's Samsung's fault with the problematic Samsung Knox). Screen recording seems to be buggy and 5GHz hotspot don't work (2.4 GHz works fine). Other than that I haven't found any other issues. Video recording works fine.
Click to expand...
Click to collapse
The stock equalizer works perfectly fine (I use it all the time), so is 5GHz wifi and screen recording. Video recording is an issue in 15.1, not 14.1.
javelinanddart said:
The stock equalizer works perfectly fine (I use it all the time), so is 5GHz wifi and screen recording. Video recording is an issue in 15.1, not 14.1.
Click to expand...
Click to collapse
I'm using the latest official build from the official LineageOS website. It's 14.1
There is a bug in lineage-14.1-20180222-nightly-kltesprsports-signed.zip build - no sound after installation, because "Do not disturb" option is turned on by default, but it shows like it is turned off in the drop-down menu so you have to touch the "Do not disturb" icon to see it is actually turned on, and turn it off manually.
It took a few reinstalls from 20180222 to 20180215 back and forth to find this out.
Also I am kinda upset about not functioning NFC, and I found out that LineageOS does not support NFC on many different Samsung models. Why is it so - a missing driver or something else?
I would like to pay someone to fund NFC development, if possible.
vrobo said:
There is a bug in lineage-14.1-20180222-nightly-kltesprsports-signed.zip build - no sound after installation, because "Do not disturb" option is turned on by default, but it shows like it is turned off in the drop-down menu so you have to touch the "Do not disturb" icon to see it is actually turned on, and turn it off manually.
It took a few reinstalls from 20180222 to 20180215 back and forth to find this out.
Also I am kinda upset about not functioning NFC, and I found out that LineageOS does not support NFC on many different Samsung models. Why is it so - a missing driver or something else?
I would like to pay someone to fund NFC development, if possible.
Click to expand...
Click to collapse
NFC works fine on my kltesprsports on 14.1 at least. I'm not sure why you're seeing issues. Can you give me some steps to reproduce?
javelinanddart said:
NFC works fine on my kltesprsports on 14.1 at least. I'm not sure why you're seeing issues. Can you give me some steps to reproduce?
Click to expand...
Click to collapse
Oh, that's good news! In fact I did not check the NFC function before writing that message, I think I saw somewhere that NFC does not work in LineageOS on S5.
Or maybe I got confused with S4 (jfltexx) which I also own and where NFC does not work for sure.
I've sent you a donation thru Paypal, many thanks for your work!
Just a side note for fun and general info. My bank flagged my account after using their banking app as accessing with a "known fraud device" and locked my savings and checking. In the end, I had to get new accounts because they could not turn them on after the fact. I tried to explain in vain and they would not hear it. So fair warning if you try to use your banking app on the Lineage ROM. Nothing extra added, only the current version of this ROM and open gapps.
Is there any chance to see Wireguard VPN support in this build?
vrobo said:
There is a bug in lineage-14.1-20180222-nightly-kltesprsports-signed.zip build - no sound after installation, because "Do not disturb" option is turned on by default, but it shows like it is turned off in the drop-down menu so you have to touch the "Do not disturb" icon to see it is actually turned on, and turn it off manually.
It took a few reinstalls from 20180222 to 20180215 back and forth to find this out.
Also I am kinda upset about not functioning NFC, and I found out that LineageOS does not support NFC on many different Samsung models. Why is it so - a missing driver or something else?
I would like to pay someone to fund NFC development, if possible.
Click to expand...
Click to collapse
What are the bugs with the lineage-14.1-20180222-nightly-kltesprsports-signed.zip build? I'm interested in flashing. Also, was the issue with airplane mode disconnecting LTE on the s5 sport ever resolved? Disabling airplane mode does not initiate LTE connection only until I reboot my phone. I'm on build 14.1-20170418 currently so curious to see what has improved. Also, a big thanks to everyone in this community. I moved from cm13 to this build a year ago and I've been happy. Just looking to resolve the LTE issue .
onlyoneway, this is very old version from February, you should better install the latest nightly build from here: https://download.lineageos.org/kltesprsports
I do not know about LTE as my operator frequencies do not match US ones. However 3G works nice after "Flight Mode" on/off.
P.S. bumping the question
vrobo said:
Is there any chance to see Wireguard VPN support in this build?
Click to expand...
Click to collapse
Wireguard is awesome.
I found out that calendar does not notify about forthcoming events. I use LineageOS without Google stuff (with Offline Calendar https://f-droid.org/en/packages/org.sufficientlysecure.localcalendar/ instead).
Is this a bug in Offline Calendar on in LineageOS build for kltesprsports?
vrobo said:
onlyoneway, this is very old version from February, you should better install the latest nightly build from here: https://download.lineageos.org/kltesprsports
I do not know about LTE as my operator frequencies do not match US ones. However 3G works nice after "Flight Mode" on/off.
P.S. bumping the question
Wireguard is awesome.
Click to expand...
Click to collapse
Thanks vrobo. Do you happen to know where I can find the changelog from the build I have upto the latest?
onlyoneway said:
Thanks vrobo. Do you happen to know where I can find the changelog from the build I have upto the latest?
Click to expand...
Click to collapse
https://download.lineageos.org/kltesprsports/changes/
Hey Guys! I have a Samsung S5 sport that I recently dirty flashed to the 14.1-20180803-NIGHTLY-kltesprsports build. Now my battery does not go beyond 65% no matter how long I leave my phone plugged in. I have tested different cables and adapters, and still the same thing. Didn't have this issue with the 20180720 build. Any thoughts? Bug maybe? Thanks in advance.
Hi to all
The developers of derpfest ROM don't wanna share the links to Derpfest in xda.
We have to respect this! Don't post any links to ROM or telegram derpfest groups!
Here is the closed thread without links but with important infos:
https://forum.xda-developers.com/Mi-9/help/android-10-derpfest-rom-10-official-t4032543
So, this thread is only for advice, discussions and experiences.
Future requests
Please tell me what you want to have changed or implemented, the I would ask the developers if it could be possible.
My list
1. adding autocall record
2. Adding flip display down to mute ringer
3. Smart charge (charging only to a predefined % value)
4. Adding display saturation level
5. All closing button in recent app list
6. And last to be 100% perfect with 5 stars: a system menu with automatic timebased network disconnect... Like leandroid app
Hi guys
This TWRP (last version from 16.) is lookin and working better than all others:
https://forum.xda-developers.com/Mi-9/development/orangefox-recovery-10-mi9cepheus-test-t3987959
If you delete the empty folder root data per_boot the backup is running without faults.
Many additional functions like disable magisk modules for testing or after bootloop with a non working module....
There are 2 versions of derpfest 13.1. 20 online. Someone checked the differences?
Is it impossible to support the ok google hotword feature?
Sadly hotword don't work on most custom roms in Mi9.
Except few roms
For example, old Bootleggers ROM, EvolutionX 3.5 1224 build etc...
You can assign AI button to ok google or use screen gestures,
but in my case I really need a hotword so I can't move to another rom.
I saw some comments before.
There was a saying that moving from possible ROM to impossible ROM, but the attempt failed.
System - product - priv-app - hotwordenrollmentokgooglehexagon
coey0814 said:
Is it impossible to support the ok google hotword feature?
Sadly hotword don't work on most custom roms in Mi9.
Except few roms
For example, old Bootleggers ROM, EvolutionX 3.5 1224 build etc...
You can assign AI button to ok google or use screen gestures,
but in my case I really need a hotword so I can't move to another rom.
I saw some comments before.
There was a saying that moving from possible ROM to impossible ROM, but the attempt failed.
System - product - priv-app - hotwordenrollmentokgooglehexagon
Click to expand...
Click to collapse
I didn't use it but do you checked all settings?
Have a look here:
https://translate.googleusercontent...700271&usg=ALkJrhjVQfsolQJiA_E-Zura_IPnjE5Krw
Laptapper said:
I didn't use it but do you checked all settings?
Have a look here:
https://translate.googleusercontent...700271&usg=ALkJrhjVQfsolQJiA_E-Zura_IPnjE5Krw
Click to expand...
Click to collapse
Thanks for your comment. But the site you link to looks like the official Google site,
I tried it before and it didn't help.
coey0814 said:
Thanks for your comment. But the site you link to looks like the official Google site,
I tried it before and it didn't help.
Click to expand...
Click to collapse
Of course officially Google site, I don't know your knowledge. But now we can go deeper in system and thinking...
Did you try to restore a working google with titanium?
Google cam for derpfest (may be good for all android 10)
Hey ladies
If you want to try my personally favorite of gcam with complete settings (I'm on derpfest but I think it's working quite good in all roms with Android 10) then you can download my backup and restore it with titanium. Recommend is no gcam is installed on starting restore.
https://drive.google.com/uc?id=106vNLIqUZeaIADT6KGIVlSXi9nZLYwkv&export=download
Am I here alone?
No comments no experiences no feature requests for derpfest (some people thinking it's the best ROM for Mi9!)
Laptapper said:
Hey ladies
If you want to try my personally favorite of gcam with complete settings (I'm on derpfest but I think it's working quite good in all roms with Android 10) then you can download my backup and restore it with titanium. Recommend is no gcam is installed on starting restore.
https://drive.google.com/uc?id=106vNLIqUZeaIADT6KGIVlSXi9nZLYwkv&export=download
Click to expand...
Click to collapse
Selfie video still not working
Laptapper said:
Am I here alone?
No comments no experiences no feature requests for derpfest (some people thinking it's the best ROM for Mi9!)
Click to expand...
Click to collapse
most people looking for information about some roms go to the "ROMs" section and not here, which is why so little interest. DerpFest itself is the best rom for mi9 (with weekly releases.)
IBTD, a ROM with GAPPS included can never be 'the best ROM' for any device. YMMV but I'd like to decide by myself which Google bloatware I'd like to install.
Cheers
Toscha
rekin79 said:
most people looking for information about some roms go to the "ROMs" section and not here, which is why so little interest. DerpFest itself is the best rom for mi9 (with weekly releases.)
Click to expand...
Click to collapse
+1
stajlus said:
+1
Click to expand...
Click to collapse
Yes you are right but in case of forbidden links (btw I didn't know why the developer of derpfest didn't allow us to post links in xda) in my opinion I can't move in the ROM thread in case of xda rules.
Battery tweak
I've tested magisk module "MOD optimal battery saving for Mi 9 v3. 7" in newest derpfest
and yesterday evening I was on 71% and today in the morning around 8 hours of sleep it was also 71%!
Never seen such a low battery consumption over night.
Patricmac said:
Selfie video still not working
Click to expand...
Click to collapse
Yes, I think every gcam has some bugs.
Also this one:
https://drive.google.com/folderview?id=1-HAYDgRI2z2Z7pbWMBtmEuP8jStW5oPT
But this one (apk install, unpack my zip xml settings to sd card that you've got a GCam Folder with subfolder Configs7 and there are the xml configs / open cam app and choose the config file by double click black area or in the settings menu)
I've found today and there are a lot of settings adjustable and quite stable. For me perfect pictures....
Try and give feedback.
I've used Derpfest for a couple of days and was very happy with it. But I couldn't get Android Auto to work with my car - dark screen on the dashboard and phone would lock up. I've dirty flashed PE and there Android Auto works fine.
I understand Android Auto may be a very rare use case, so I certainly don't want to complain. What's more interesting is that you may apparently try dirty flashing between PE and Derpfest...at least at this moment.
Can confirm. Android auto not working. Black screen and phone restarts for me.
So i am going back to PE.
Laptapper said:
Battery tweak
I've tested magisk module "MOD optimal battery saving for Mi 9 v3. 7" in newest derpfest
and yesterday evening I was on 71% and today in the morning around 8 hours of sleep it was also 71%!
Never seen such a low battery consumption over night.
Click to expand...
Click to collapse
Hi, thanks. Can you share the mod?
Sent from my MI 9 using Tapatalk
GIPAQ said:
Hi, thanks. Can you share the mod?
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
Attached