[CUSTOM ROM ISSUE - Realme 6 ] I have a realme 6 device and i tried to install corvus os in it . i used pitchblack recovery . - Realme 6 Questions & Answers

upto unlocking the bootloader is done alright but after installation, while rebooting the phone shows the message "orange state ,your device has been unlocked and can't be trusted not booting, will boot in 5 seconds" and it reboots again and it continues .I have no prior experience in flashing custom rom .any help is appreciated . At this point it would be great if i could atleast get back the realme ui ....

its pitch black recovery which troubles in flashing corvus rom . through there's a forum to revert back to realme ui b.55 firmware from custom rom or can be used in case of a bricked phone it works and for future if you want to flash corvus i suggest sky hawk recovery , i personally get same problem with pitch black recovery so i used sky hawk recovery and surprisingly it works pretty well than i expected it to be

Related

[BRICKED] Need help!! Alcatel One Touch S'Pop (4030x)

Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.

S6 Edge G925F stuck in bootloop [video] [Solved]

So from yesterday my phone is stucked on a bootloop ... i didn't installed anything in the last days, i didn't installed anyupdate.
I tried to install stock firmware via odin but i'm still on bootloop ...
Before installing stock firmware my phone was booting until android .. it showed Android is optimizing app x from xx and then rebooting and doing the same thing ..
After intalling stock my phone is restarting after Galaxy s6 edge - powered by android logo.
I've looked into this forum and tried to solve how others solved,but nothings work ...
Anyone knows how to solve this?
I tried to flash custom rom but i cannot copy on internal storage via twrp ... and i dunno also how to solve this ...
VladHD said:
So from yesterday my phone is stucked on a bootloop ... i didn't installed anything in the last days, i didn't installed anyupdate.
I tried to install stock firmware via odin but i'm still on bootloop ...
Before installing stock firmware my phone was booting until android .. it showed Android is optimizing app x from xx and then rebooting and doing the same thing ..
After intalling stock my phone is restarting after Galaxy s6 edge - powered by android logo.
I've looked into this forum and tried to solve how others solved,but nothings work ...
Anyone knows how to solve this?
I tried to flash custom rom but i cannot copy on internal storage via twrp ... and i dunno also how to solve this ...
Click to expand...
Click to collapse
Factory reset from recovery.
Sent from my SM-N920C
i did that ... same
Problem solved with JTAG repair.
Can you describe in details?
Sent from my SM-N920C
When a phone is in a hard-bricked state it’s most likely that the bootloaders, which is the phones initial code to launch the phones ROM, becomes corrupted.
The only way to revive the phone is to rewrite the bootloader code.
So basically, if you can't flash a rom through twrp or odin, this service we'll rewrite the os from scratch without having any acces to phone.

my MOTO Z is a disaster !

I broke my moto z display back in 2017 and i recently got it repaired.
My device was rooted , and had nexus rom on it
So after i got it repaired i updated the twrp and tried to flash a couple of roms
After the flash every rom i have flashed is stuck in bootloop
so i went back to the service center and got back to stock os ( OREO ) !
Once its all done ! my device wont boot , instead show a NO COMMAND screen .:crying:
It only boots if i boot to bootloader and from there i select the START option
The second thing is that my device codename shows SHERIDAN in bootloader and grffin in few apps i used !
And can i root my device on oreo ! and if possible please guide me i as i could not find any reliable source !
whiteTee said:
I broke my moto z display back in 2017 and i recently got it repaired.
My device was rooted , and had nexus rom on it
So after i got it repaired i updated the twrp and tried to flash a couple of roms
After the flash every rom i have flashed is stuck in bootloop
so i went back to the service center and got back to stock os ( OREO ) !
Once its all done ! my device wont boot , instead show a NO COMMAND screen .:crying:
It only boots if i boot to bootloader and from there i select the START option
The second thing is that my device codename shows SHERIDAN in bootloader and grffin in few apps i used !
And can i root my device on oreo ! and if possible please guide me i as i could not find any reliable source !
Click to expand...
Click to collapse
Download the two files here https://forum.xda-developers.com/moto-z/development/stock-moto-z-8-0-firmware-t3805226 put in the same folder an run the bat retail_AS_800.bat
mosfet321 said:
Download the two files here https://forum.xda-developers.com/moto-z/development/stock-moto-z-8-0-firmware-t3805226 put in the same folder an run the bat retail_AS_800.bat
Click to expand...
Click to collapse
Thank you it worked for me but i had to use cmds

[Request] Stock Rom for GooPhone 11 Pro Max (a.k.a. iPhone 11 Pro Max Clone

Last night i took the oportunity to flash my device with stock rom it, but didn't observed the important info that my device version is with 8 gb storage and the flash firmware was for the version with 16 gb storage. So now my phone is bricked. SP flash tool is still the option to revive it back to life, but i haven't the needed flash files for my version - 8 gb storage. Please help
up
up
Up
Up
hello
here is the stock firmware rom all are looking for i upload it for xda members , my phone WAS BRIKE DEAD,its work and phone start up , charging , recovery , everything ok , but hang on first boot , , ,when you chose language and contrary its hang on welcome logo ......i did flash many times using sp tools , same problem , any have solution
file name : MT6580__Apple__XS_Max__IPhone_XS_Max__6.0__alps-mp-m0.mp1-V2.34_hct6580.weg.c.m_P147
i think its a backup rom , because in recovery i make a root integrity check and find some error apk modification....or i have emmc problem and its not full flashing
you can try maybe its work for others...best luck and please tell us if its work.....
The Link
https://www.4shared.com/s/ftVYZSL78iq

umi device detected as cmi by TWRP

Hi, I'm trying to flash miui 12 or 12.5 into my mi 10 because my carrier never bothered beyond 11.6.0.
I've followed some tutorial here at XDA and when trying to install a umi rom, it gives me error 7 and tells me my device is cmi and the rom is meant for umi. I've tried several different roms with no success. I also tried flashing a cmi rom but it doesn't boot, since TWRP detected the device as such, but after a successful installation, it will not boot properly, it gets stuck at MI screen and restarts over and over.
Any help would be much appreciated.
Edit: I managed to solve it by redoing everything from scratch (at lease form where I was able to, since my phone was unable to boot Android).

Categories

Resources