Related
I don't see that screen protectors have been discussed recently, so I'm looking for suggestions/experiences for screen only protectors (I'm a flip case kind of gal, so I have no worries about the body).
I'm one of those weirdos who is very careful (and lucky) with cell phones, so I'm looking for something with minimal interference with the screen sensitivity. I'm defecting back after 2 years of using an iPhone without a single scratch on the screen (nor are there any scratches on my 8525 or my Treo or the 8125) in spite of extensive use, and I'm already loving being able to use my fingernails again
I'll greatly appreciate any suggestions/experiences on what's worked well . . . or what hasn't worked. Ease of application is a plus as my 8525 to this day has a tiny bubble I never was able to eliminate . . .
Also, I hope this is an appropriate place to express my gratitude for this forum. When I found it, I was vacillating between the Tilt 2 & the LG eXpo, and comments here nudged me into my decision: I brought my Tilt 2 home yesterday
TIA!
The screen protectors that AT&T sell for the Tilt 2 work really well, are easy to apply, and are a good deal (3 for $10).
I briefly used the AT&T-supplied screen protector. I switched to an eBay full-body protector, but was unhappy with the way it was cut - didn't fit the Tilt2 very well. I replaced that with the BodyGuardz full body protector and it's a much better fit. I recently removed the BodyGuardz screen protector (but still using the body protector) and installed an anti-glare screen protector from Boxwave.
I had no complaints about screen sensitivity with any of them. The original AT&T screen protector and the one from Boxwave feel "slick", are a more rigid plastic and they didn't really adhere to the screen very well around the edges. The ebay one and the BodyGuardz feel a bit "rubbery", adhere better to the screen and any bubbles will work themselves out after a day or so.
I don't really have a preference one over the other - for me it came down to a preference for a less glossy screen.
Hy! You can try and have a look about what other are saying here http://forum.xda-developers.com/showthread.php?t=605241 or here http://forum.xda-developers.com/showthread.php?t=571172 or here http://forum.xda-developers.com/showthread.php?t=594029
In short, there are 3 majors options:
Zagg's Invisible Shield - found here http://www.zagg.com/invisibleshield/htc-tilt-2-cases-screen-protectors-covers-skins-shields.php
Bodyguardz - found here http://www.bodyguardz.com/content/accessories/1-12--2393.htm
Gadget Shieldz - found here http://www.gadgetshieldz.com/att-ti...nvisible-shields-screen-protectors-skins.html
The main difference between them is the price, the first 2 cost 25$ each, but Bodyguardz offers 2 kits and both sellers offer lifetime warranty, third is pretty much the same but whitout the fancy package and alot more cheaper.
Try reading all the topic's I gave you and you will find some discount coupons for each seller. The rest is up to you to decide which one suits you better!
Cheers!
Check out WMExperts store
@ sslund,
I can totally appreciate your minor obsession over the "right" screen protector for your device. When I first recieved my TP2, I was using the crappy Rocketfish iPhone screen protectors that I would cut to size. They provided good scratch protection but there was a lot of color separation, meaning they kind of scintillated a red-green pattern over the display which sucked. I then tried the ATT's offering which I didn't like either.
On a whim I bought these from WMExperts Store and have been very happy with them. I cannot post the link as per forum rules, but search their site for "Smartphone Experts Screen Protectors (3-Pack) for AT&T Tilt2"
They do not scratch unlike some of the cheaper Fellows products, nor are they really even noticeable. They are removable, washable, and can be reapplied, which I've successfully done - as long as you're patient in the drying process so as to not get dust stuck to them (air dry), re-application actually works! I did have to cut the sides down a bit as it was just a hair too wide, but that's more of a personal preference. Since they are removable, I've only used one of the three since I got my TP2 in October.
Of course YMMV, but given em a shot and good luck!
I really like my body guardz. thicker and doesnt have a smuge if i touch it like the one that came with the phone.
I would like to install a new shield on my screen but I can't tell if the original is removable and what the recommended method of removal would be if it is.
Clarivue ultra clears are REALLY nice and clear and tough. They come two to a pack. I cought some from a guy on ebay for like $9 shipped. They were real retail clarivues.
WillardZ said:
I would like to install a new shield on my screen but I can't tell if the original is removable and what the recommended method of removal would be if it is.
Click to expand...
Click to collapse
If you are referring to the flimsy protective film that ships on the device? It is removable. Otherwise you would need to try and look through the message that is pre-printed on it.
If you mean the protector that is shipped in the box, well that is also removable if you have attached it.
If you mean ANY screen cover, then the answer is still yes. They are all removable.
Use your finger nail, a toothpick, a credit card, or similar device to pry it off of the screen.
Very simple and rudementary.
Any glass recommendations for the BLU R1 HD device?
I am looking for the same. I found some on AMZN but dont know if to bite the bullet on them.
Amazon Screen Protectors
Honestly I wasn't going to put one on, because for me it's just a cheap backup, But after one day of use I already have a few very small scratches on the top right hand corner, Gorilla Glass 3 isn't doing great and my OCD is already bothering me.
If I get scratches on the actual screen area I'll lose it lol
On Amazon their are three choices and honestly they very well may all be manufactured by the same company based on the listings
BLU R1 HD Screen Protector [Tempered Glass], Popsky 0.26MM Ultra Thin 9H Hardness High Definition HD Scratch Proof Premium Screen Protector Glass Protective Film $8.50 w/ Shipping
[2 Pack] BLU R1 HD Screen Protector, Nearpow® [Tempered Glass] Screen Protector with [9H Hardness] [Crystal Clear] [Easy Bubble-Free Installation] [Scratch Resist] $9.99 - Free Prime Shipping
BLU R1 HD Tempered Glass Screen Protetor, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness Shatterproof High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone - $8.30 with shipping
They are all 0.26MM
They all have 2.5D edges (which should match better with the 2.5d screen
They all have oleophobic coating
They all list Anti scratch/shatter/explosion.
My advice would be that if you want a backup protector and have prime go for the second one, otherwise the last one is 20 cents cheaper and most likely they are all the same screen protector just repacked by different companies which is extremely common. For a buck and some change more I'll probably go with the second one and let you know how it goes.
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
thirdlobe said:
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
Click to expand...
Click to collapse
Looking forward to your review as I'm looking at that one myself.
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Any updates on best screen protectors, no scratches yet, but i have saw a post or two about how easy this screen scratches.
The one I purchased arrived last night and I took off 6 for a .99$ plastic protector that I bought. That protector never say well so I gave the glass a try. Unfortunately the glass one sat just as poorly. Where the cut outs were for the camera and the LED the glass did not fit flush against the phone and showed as it was lifted.
I have taken both off and am just using the phone naked.
IMO
In my personal experience *most* screen protectors are created equal. My sister bought one off Amazon for 10$ and I bought one for 1.50$ on Ebay, When they arrived her's was in a fancier box but inside the boxes they had almost exactly the same contents. I tried scratching mine with a knife, and it didn't scratch (so it was glass). I'd say it is worth the risk (only 1.50 shipped in the same time as amazon one)
EvoKnvl said:
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Click to expand...
Click to collapse
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
movielover76 said:
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
Click to expand...
Click to collapse
Same, because the phone screen is not square in the sides the protector don't adhere like it's supposed too
Does anyone like the nearpow ones from amazon? I bought the box with two of them but haven't put one on yet. I'm wondering if it's even worth trying since reports so far don't seem to good. I can see where it might be more challenging to make them for a screen with rounded edges. I have two of the phones now and like them very much so am interested in protecting them.
I purchased this one:
"BLU R1 HD Tempered Glass Screen Protector, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone"
from amazon.
Does not fit cleanly.
Given all these reports I am beginning to wonder if these are even tested or manufacturers just assume it will work once cut out to size.
Sadly, i'm just joining in the bad news. I purchased the Qosea Ultra-thin 2.5D 9H Hardness Crystal Clear Scratch Resistant Tempered Glass Screen Protector for BLU R1 HD and so far it-s the same result, it doesn-t stick on the edges because of the curvature of the screen. I'm still using it because i don't want to ruin the screen so i'll be waiting for the confirmation of a tempered glass that actually fits the screen properly.
I'm a bit baffled reading all the comments here and on amazon. It truly seems like nobody tested these things. I-m starting to think there are fake commenters because each glass protector have at least one 5 star review telling about how amazingly fits. Followed by nothing but unsatisfied people.
I have had mine since release and it's still in good shape. Don't see a point in getting any protector for such a cheap phone.
Well it's not exactly tempered glass but the reviews are better as to fit. Apparently it's a hard plastic. I'm getting this phone for my kid so something needs to go on there becasue he's not exactly not clumsy.
https://www.amazon.com/dp/B01HQOTA1M/ref=psdc_2407781011_t3_B01N4DEMZY
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
I would urge you to ditch the plastic screen protector that is provided with the phone and get a premium tampered glass protector. Not only does it make the screen view much better, as well it makes handling the phone much easier, and something this phone deserves.
have you any photos of this tempered glass on P10?
Just google "Olixar Huawei P10 Tempered Glass Screen Protector".
Although it left 2-3 mm bubbles around the edges of the whole phone, which isn't nice, the bubbles looks like grey dirt, and I can't remove these bubbles. Might be looking for another brand like Zagg or something equivalent.
nicoX said:
Just google "Olixar Huawei P10 Tempered Glass Screen Protector".
Although it left 2-3 mm bubbles around the edges of the whole phone, which isn't nice, the bubbles looks like grey dirt, and I can't remove these bubbles. Might be looking for another brand like Zagg or something equivalent.
Click to expand...
Click to collapse
These bubbles are the cause why I don't replace the screen foil ^^
I use an screen protector like i posted in the oleophobic thread. No bubbles or anything here. But i don't know if it is sold somewhere outside the Netherlands.
I think these manufacture has improved over these years in producing protectors for curved glass, probably the latest trend is a normal glass protector and they include a tube of liquid adhesive to squeeze along the edge to cover the gaps, I check a few out to try, although they are not available for purchase out of hong kong or china, so I cannot provide a link, but I think places like ebay or amazon will have them available but at a much increased priced.
@ the ops, I too removed the protector, the supplied one is a good quality one, but I had a speck of dust underneath, and wasn't sure if it was dust or bright pixel. I just used one of my Sony XP protector and cut to shape for now untill I get a proper one.
Any suggestions which company do good on the p10?
I've tried two brands.
LK branded glass screen protector from Amazon UK. The fit was good, the black border blended in perfectly on my P10 black. But there was a big rainbow patch in the middle. I complained, the service was excellent, got a replacement no questions asked. But the new one also had a rainbow patch, even bigger!
Then I gave up and ordered a different one. An OMOTON branded one, also from Amazon. This one was all transparent glass, no gaps around the sides, and covers the whole screen width. It's a little short, ending with a gap at the top and bottom of the phone. However, the screen is so smooth to tap, and the brightness and colours so much better than the LK protector.
So I would recommend the OMOTON. It doesn't offer full protection, but I pair it with a simple tpu case with a lip, and it works quite well together.
Thanks for the help. Tomorrow a PULESEN, (via Amazon) will arive. If it is not that good, I go for your recommendation.
I ordered a GlasRitter protector by tradelis via eBay Germany.
It doesn't fit perfectly - the hole for the home button is around 1mm too low.
Also the glass looks like a mirror. When I'm outside at sunny weather it's really annoying and when I'm in the dark with a small light source, like a bed light, I can see myself.
So, don't buy this - it's oleophobic, but the rest isn't that good.
But it's the only one I found which covers the whole screen including the small area under the home button. Without this I don't want a protector. I need a full protector. Any recommendations?
After killing the first one of PULESEN with dust, I was able to figure out how to place the second one. It was not that easy but currently I am satisified.
Hi, I am getting the S23 ultra soon and was wondering, am I best leaving Samsung's film screen protector on, or will this not really offer much protection?
Am I best taking this off and putting my own?
I was looking at these UV glass ones, which I don't really have experience with, they are all a little on the dear side in comparison to the glass ones that are ready to stick.
I tend to prefer glass as it feels like more protection and touch / fingerprint still works fine and also tends not to suffer air bubbles as much.
Regards
James
You dont get a screen protector on it when it arrives
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
s3fan said:
You dont get a screen protector on it when it arrives
Click to expand...
Click to collapse
That's a bummer, they have as far as I know, at least on the flagships since the S10
Sprov said:
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
Click to expand...
Click to collapse
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Getting on my high horse here to ***** about the hypocrisy around "saving the planet" by not providing a screen protector....it's all virtues signaling and real cheap ass practice.
Look what resulted from buying a screen protector from Scamazon (add gas burned, electricity, etc ) to see the "savings"
dl12345 said:
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Click to expand...
Click to collapse
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
robbo1947 said:
That's a bummer, they have as far as I know, at least on the flagships since the S10
Click to expand...
Click to collapse
yeah it looks like they stopped including them with S22 Ultra. My S21U came with a screen protector and the S22U didn't. I'm from EU if it matters.
Sprov said:
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
Click to expand...
Click to collapse
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
kevindd992002 said:
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
Click to expand...
Click to collapse
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
who cares? said:
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
Click to expand...
Click to collapse
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Thanks for everyone's replies, after a lot of fear, hassle, and a bit of a loss of money I decided on a film protector which is working 100% fine.
Not sure if I just picked rubbish glass screen protectors, but they caused me big issues. Neither would work with fingerprint reader and because they were hard, my original case was lifting the sides of the protector a bit, meaning touch was less sensitive.
The first glass protector I tried was UV and when it came to taking this off, that was a little scary with this brand-new phone!
Trying to peel it back off was a hard job, was very stuck and was actually cracking as I was slowly lifting it off.
So now I have a different case that doesn't affect the protector and a film protector and all seems good now
kevindd992002 said:
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Click to expand...
Click to collapse
Very little issues. Honestly it's works as well as the tpu film did I had on my s21 ultra. I wanted glass over the film on the ultra because of the pen. I wasn't sure how the pen tip would work with indenting the tpu film. I like the feel of the glass a lot better.
Before my S23U arrived I already had the case and glass ready. Didn't even power it on first, but went right away and applied this UV glass.
No issues with case causing glass come off. Glass needs to be perfectly aligned.
I did the same with my N9 that I traded in - not a scratch anywhere, although I dropped it few times and the UV glass saved it And I had N9 for full 4 years..
No issues when I took the glass off before shipping N9 back to Samsung.

After using these on my S21 Ultra, I purchased the same for my S23 Ultra and installed it today. Took about 15 minutes and extremely happy with the results. Feels like the original glass and most times don't even notice it's on. Additionally, customer support is top notch. Any issues and they send out replacements without issue. They're also available for installation support if needed.
The key is to watch the installation video and read the instructions multiple times and clean clean clean the phone.
https://www.amazon.com/dp/B0BMDLDPY6?psc=1&ref=ppx_yo2ov_dt_b_product_details
I live in Asia and use Zeelot glass screen uv protector. Fingerprints work well and didn't have issue with my case
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
_GRIZZLY_ said:
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
Click to expand...
Click to collapse
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
aureum said:
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
Click to expand...
Click to collapse
Yes, I think too about original samsung screen protector but I will buy it after receive points (about few days) thanks to buy phone in official site. Change my 3mk if I see issues but after 1 week (I know it's small period time) all is fine with case spigen tough armor.
However I don't sure that later, will not unstick because is full dimension from corner to corner with my case.
Easy wet application like similar film protectors.
Mine is 3mk Silver protection:
Folia na ekran Samsung Galaxy S23 Ultra - 3mk SilverProtection+
Antyuderzeniowa folia ochronna, wzmacnia ekran do 400%, powłoka samoregenerująca, łatwy montaż. Zabezpiecz Samsung Galaxy S23 Ultra. Oficjalny sklep producenta
sklep.3mk.pl
This is local product of my country - Poland
i use domeglass and spigen ultra hyprid clear case, because of Red Color from phone.
Its fit perfect together.