I am not responsible for your actions, but I will try to help.
I'm going to assume you have unlocked bootloader and ADB/Fastboot tools installed.
1. Download latest Magisk and make 2 copies of it. Install one of them on your phone. Change the extension of 2nd from .apk to .zip, then move it to your phone`s storage
2. Download Pitch Black recovery for Redmi 9C
3. Move recovery.img to both your ADB folder (can be found at C:\adb) and phone`s storage
5. Download DM-VERITY, FORCED ENCRYPTION
6. Rename it to enfec.zip and place in phone`s storage
4. Download attached vbmeta.img and place it in your ADB folder
5. Go into fastboot mode
5. On your PC, open cmd-here.exe in adb folder
6. fastboot flash recovery recovery.img
7. fastboot flash vbmeta vbmeta.img
8. fastboot reboot recovery
9. Sometimes recoveries don't work with touchscreen. In this case, flash other region's ROM. To do this, find and download fastboot version of ROM. Unzip it, run flash_all.bat while being in a fastboot mode (this will erase all data). WARNING: DO NOT RUN flash_all_and_lock.bat. THIS WILL LOCK THE BOOTLOADER AND YOU WILL HAVE TO WAIT ANOTHER WEEK!
Next retry again the whole tutorial. You can also use USB-OTG mouse.
10. Navigate to 'Install' section. Check every option except 'Reboot after installation is complete', 'Zip signature verification' and 'Advanced remove of Forced Encryption'. Select recovery image that you previously moved to your storage and install it 'as Recovery'.
11. In recovery, move to 'backup' and make a backup to your SD card (optional, but highly recommended). Usually, it doesn`t work out of the box. Try searching for guides.
12. In the same section install enfec.zip and then Magisk.zip. If you get errors like 'Failed to mount /nv_data', ignore them.
13. Reboot to system, copy external_sd/PBRB/tools -> storage/0/emulated/PBRB/
Done!
How to pass SafetyNet (tested on 05.05.21 dd/mm):
Simply enable MagiskHide. This will only work if you haven`t modified the /system with modules that don`t hide themselves.
If you did heavy modifications, install UniversalSafetyNetFix (USNF) (repo) or install both MagiskHide Props Config (can be found in Magisk`s modules) and USNF. Instructions to installation of Props Config can be found in the README or on the web. Experiment with it, this is device specific.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems like you are using redmi 9C NFC
I am using redmi 9C Global
Did you tested this recovery on your phone?
I downloaded a recovery from GitHub for redmi 9c flashed it after flashing I flashed vbmeta too but can't boot into recovery
I am currently on global EU ROM 12.0.3 which I flashed yesterday
Before that I was on miui global 12.0.10
I tried to root it with magisk and after flashing magisk patched boot.img flashed vbmeta too
But can't get root access
Before I was on miui global 12.0.8
I rooted with magisk and got root access
In order to get root access I downgraded back to miui 12.0.8 but can't get root access
What should I do now?
It seems like you are using redmi 9C NFC
Click to expand...
Click to collapse
True
I am using redmi 9C Global
Click to expand...
Click to collapse
That doesn`t really matter
Did you tested this recovery on your phone?
Click to expand...
Click to collapse
Yes
I downloaded a recovery from GitHub for redmi 9c
Click to expand...
Click to collapse
Which recovery have you flashed? I provided link to SouceForge, not GitHub
I downloaded a recovery [...] flashed it after flashing I flashed vbmeta too but can't boot into recovery
Click to expand...
Click to collapse
Try fastboot reboot recovery.img
If that doesn`t work, try updating your ADB/Fastboot tools. Just download needed files from any site and place them in your ADB folder.
Also, since this recovery is unofficial port, it is a bit different from original. To boot into recovery, you don`t have to hold power+volume_up untill you see recovery menu. Instead, hold it untill screen goes black.
I tried to root it with magisk and after flashing magisk patched boot.img flashed vbmeta too
But can't get root access
Click to expand...
Click to collapse
From my guide:
No users report bootloops, but in some cases root isn't granted. In this case follow next steps.
Click to expand...
Click to collapse
Before I was on miui global 12.0.8
I rooted with magisk and got root access
In order to get root access I downgraded back to miui 12.0.8 but can't get root access
Click to expand...
Click to collapse
I don`t really get what you say, but there is no need to downgrade/upgrade. If I were you, I would flash latest MIUI, though
What should I do now?
Click to expand...
Click to collapse
Try flashing latest eu MIUI (I can help with that, if you want) and then follow method B) step by step, without making any changes and reading everything that I wrote
Hope this helps!
Can't make a backup as your tutorial because i got an error, and what i need to backup just the 'one' selected from the recobery ? can i skip this step and just install the enfec.zip and then Magisk.zip ?
I am stuck from the step 8 and 9 because i got that error and i have no idea what select from the list of the backup...
Backup is an optional step. I get an error too and I have no idea why.
Seems like it worked very well. but the safetynet failed, should download Magisk v21.4 zip because the newest one failed at the moment to flash it, and if you get an error at the end of flashing the DM-VERITY, FORCED ENCRYPTION it's ok still working anyway. thanks for sharing the post
@0purple
Btw personally skip the step 8 and 9, if you failed to get into recovery with the bottons just try again the step 5,6,7
Knox6 said:
but the safetynet failed, should download Magisk v21.4 zip because the newest one failed at the moment to flash it,
Click to expand...
Click to collapse
Updated the post, try it
I have the European version 12.06 of the redmi 9c. I tried to boot into recovery, but the touch doesn't work in any way, so I can't do anything... help me
i just enabled magisk hide option in magisk manager setting it fixed it
MHaseebpk said:
View attachment 5278627View attachment 5278627i just enabled magisk hide option in magisk manager setting it fixed it
Click to expand...
Click to collapse
does the root work for you? I have the EUropera version 12.0.6 and it doesn't work
sephirot91 said:
does the root work for you? I have the EUropera version 12.0.6 and it doesn't work
Click to expand...
Click to collapse
Yes
MHaseebpk said:
Yes
Click to expand...
Click to collapse
See this
MHaseebpk said:
See this View attachment 5278773
Click to expand...
Click to collapse
how did you do it? I followed the guide perfectly and it doesn't work. On the other hand, with the second method, the pitch recovery touch does not respond to commands
sephirot91 said:
how did you do it? I followed the guide perfectly and it doesn't work. On the other hand, with the second method, the pitch recovery touch does not respond to commands
Click to expand...
Click to collapse
I just followed seconds method and I am on global rom
You should flash global rom and should try again
MHaseebpk said:
I just followed seconds method and I am on global rom
You should flash global rom and should try again
Click to expand...
Click to collapse
Ok thanks, I could try. Do you have a guide to flash the global version? thank you very much
https://c.mi.com/oc/miuidownload/detail?guide=2
is it okay? for flashing rom global
sephirot91 said:
Ok thanks, I could try. Do you have a guide to flash the global version? thank you very much
Click to expand...
Click to collapse
First you need to download angelica global latest (12.0.10) fastboot rom from Here
Download miflash pro english from Here
Extract mi flash pro zip file install mi flash pro and extract angelica global image too in your PC
Now power off you phone
Hold volume down and power button simultaneously for 5 seconds
Your phone will boot into fastboot mode
Now open miflash pro login with your mi account connect your phone
When you will connect your phone your phone will be automatically detected
And miflash pro will recommend you to flash in recovery click on it
Next select package (fastboot rom) which you downloaded and extracted before and select script flash all.bat
Wait for 5 to 6 minutes
Your phone will be flashed
After that setup your phone
Boot again into fastboot mode
Setup adb in your PC
Install mediatek USB vcom drivers
And next follow second method
MHaseebpk said:
First you need to download angelica global latest (12.0.10) fastboot rom from Here
Download miflash pro english from Here
Extract mi flash pro zip file install mi flash pro and extract angelica global image too in your PC
Now power off you phone
Hold volume down and power button simultaneously for 5 seconds
Your phone will boot into fastboot mode
Now open miflash pro login with your mi account connect your phone
When you will connect your phone your phone will be automatically detected
And miflash pro will recommend you to flash in recovery click on it
Next select package (fastboot rom) which you downloaded and extracted before and select script flash all.bat
Wait for 5 to 6 minutes
Your phone will be flashed
After that setup your phone
Boot again into fastboot mode
Setup adb in your PC
Install mediatek USB vcom drivers
And next follow second method
Click to expand...
Click to collapse
I don't lose the unlocked bootloader, right?
sephirot91 said:
I don't lose the unlocked bootloader, right?
Click to expand...
Click to collapse
Yes select flash all.bat your bootloader will remain unlock and your phone will be flashed
Don't select flash all and lock script otherwise bootloader of your phone will be locked and you will have to wait for 7 days to unlock bootloader
Related
Hi folks!
I hope somebody can help me out with downgrade issue on my redmi note 2. I succesfully upgraded my phone to stable 7.0.7 MIUI from Miui 66.77.33. but found problems regarding traanslation and etc...
I can't downgrade the phone back to 66.77.33 version, tried using installed "mi recovery", adb tools, fastboot, mi-flash, and even tried SP flash tool.
I can't Root the phone. tried i think every single instructions on forums and still i can't get to install twrp and supersu.
Sp flash tool keeps disconnecting so that's not possible (with the right drivers installed), otherwise it would be easy to do it. I can't find the stable fastboot rom to use mi flash.
Phone boots back to Miui 7, or gives me driver signature failed, update.zip not working.
It only worked one time when upgrading to miui 7.
I would like to install 66.77.33. or Hermes global Miui 7, but whatever i do i can't get it to work.
Can somebody please isntruct me how to do downgrade. (on youtube and other foums it looks easy but all those are not working for me, don't know where is the problem)
Is it possible that new stable miui 7 has some kind of protection...
Try downgrade by fastboot
Sent from my HM 1S using Tapatalk
I tried but it's not working eother.
Can you give me directions how to exactly do it jus to see if i am doing something wrong.
I am driving crazy. Spent the whole day trying yesterday. It's drivin me nuts...
Thanks....
stomas30 said:
Hi folks!
I hope somebody can help me out with downgrade issue on my redmi note 2. I succesfully upgraded my phone to stable 7.0.7 MIUI from Miui 66.77.33. but found problems regarding traanslation and etc...
I can't downgrade the phone back to 66.77.33 version, tried using installed "mi recovery", adb tools, fastboot, mi-flash, and even tried SP flash tool.
I can't Root the phone. tried i think every single instructions on forums and still i can't get to install twrp and supersu.
Sp flash tool keeps disconnecting so that's not possible (with the right drivers installed), otherwise it would be easy to do it. I can't find the stable fastboot rom to use mi flash.
Phone boots back to Miui 7, or gives me driver signature failed, update.zip not working.
It only worked one time when upgrading to miui 7.
I would like to install 66.77.33. or Hermes global Miui 7, but whatever i do i can't get it to work.
Can somebody please isntruct me how to do downgrade. (on youtube and other foums it looks easy but all those are not working for me, don't know where is the problem)
Is it possible that new stable miui 7 has some kind of protection...
Click to expand...
Click to collapse
Flashed cn dev rom, then installed flashify, used it to flash twrp.img. dev rom already rooted. Then you can downgraded to any rom you like. If you ate going to flash stable rom by twrp, after flashed the stable rom, straight go to flashed superSU, now you reboot your phone with the stable rom with root by superSU. Hope it help.
Sent from my Redmi Note 2 using Tapatalk
I will try and let you know...hope it works.
I must have tried almost everything...
timberwolf60 said:
Flashed cn dev rom, then installed flashify, used it to flash twrp.img. dev rom already rooted. Then you can downgraded to any rom you like. If you ate going to flash stable rom by twrp, after flashed the stable rom, straight go to flashed superSU, now you reboot your phone with the stable rom with root by superSU. Hope it help.
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
i can't quite understand what you trying to say.
Can you please clearify step by step...
stomas30 said:
i can't quite understand what you trying to say.
Can you please clearify step by step...
Click to expand...
Click to collapse
This method no need to used pc.
1) downloaded china dev rom: http://en.miui.com/extra.php?mod=rom/download&r=274&mobile=no or choose the older version, saved it to your internal sd card/phone storage and renamed it to update.zip. boot into mi recovery and flashed it. Once completed. Your phone will be rooted.
2) extract this: twrp287RM note2_update.zip to a folder, inside you will have twrp.img, copy this to the external sd card or phone statage. Run flashify(play store) and granted root permission in security application. Run flashify to flash recovery img which was twrp.img just mention above. Then you will have twrp recovery.
3) boot up system and used any file explorer with root access like root explorer. Then go to system folder to rename recovery-from-boot.p to recovery-from-boot.bak else upon reboot your recovery will changed back to mi recovery.
4) Run sdFix(play store) and reboot which enabled to write to sd card.
5) if you preferred stable rom, you can used twrp to flash it and remember also flashed UPDATE-SuperSU-v2.46.zip which can be downloaded from chainfire site. This will ensure your stable rom with root.
China dev rom without google application, you can downloaded through flashify, I was using this: gapps-lp-20141109-signed-5.0.zip and flashed by twrp.
You can also flashed xiaomi.eu multi languaged rom from here: https://www.androidfilehost.com/?w=files&flid=40163
Sorry for my bad English and I hope this will solved your problem.
Sent from my Redmi Note 2 using Tapatalk
timberwolf60 said:
This method no need to used pc.
1) downloaded china dev rom: http://en.miui.com/extra.php?mod=rom/download&r=274&mobile=no or choose the older version, saved it to your internal sd card/phone storage and renamed it to update.zip. boot into mi recovery and flashed it. Once completed. Your phone will be rooted.
2) extract this: twrp287RM note2_update.zip to a folder, inside you will have twrp.img, copy this to the external sd card or phone statage. Run flashify(play store) and granted root permission in security application. Run flashify to flash recovery img which was twrp.img just mention above. Then you will have twrp recovery.
3) boot up system and used any file explorer with root access like root explorer. Then go to system folder to rename recovery-from-boot.p to recovery-from-boot.bak else upon reboot your recovery will changed back to mi recovery.
4) Run sdFix(play store) and reboot which enabled to write to sd card.
5) if you preferred stable rom, you can used twrp to flash it and remember also flashed UPDATE-SuperSU-v2.46.zip which can be downloaded from chainfire site. This will ensure your stable rom with root.
China dev rom without google application, you can downloaded through flashify, I was using this: gapps-lp-20141109-signed-5.0.zip and flashed by twrp.
You can also flashed xiaomi.eu multi languaged rom from here: https://www.androidfilehost.com/?w=files&flid=40163
Sorry for my bad English and I hope this will solved your problem.
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
ok, thanks, just waiting to download dev rom... can you point me to a link "twrp287RM note2_update.zip" and "gapps-lp-20141109-signed-5.0.zip" where it is located so i don't download something wrong or is it inside dev rom?
Also, so i need to install dev rom first in order to flash mulitlanguage rom from xiaomi.eu???????
stomas30 said:
ok, thanks, just waiting to download dev rom... can you point me to a link "twrp287RM note2_update.zip" and "gapps-lp-20141109-signed-5.0.zip" where it is located so i don't download something wrong or is it inside dev rom?
Also, so i need to install dev rom first in order to flash mulitlanguage rom from xiaomi.eu???????
Click to expand...
Click to collapse
twrp link: http://en.miui.com/thread-152550-1-1.html?mobile=2, previously we can flashed by mi recovery, but now not working, so need to used my above post's method.
I get gapps downloaded through flashify:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and
Also I had save a good hint from one of the post here: " You obviously didn't read the thread. The instructions works only for those on developer ROM which has root access. If you are on stable ROM you need to do the following:
1) Download supersu.zip and transfer the file to your phone's internal memory
https://download.chainfire.eu/696/SuperSU
2) Download the twrp287.zip from this thread. Rename it to update.zip, transfer it to your phone and install through the updater app. (Not working now)
3) The updater app will reboot your phone automatically when the installation is complete. Once the screen turned off, quickly hold the volume-up button to enter recoevery. You will see TWRP recovery.
4) While in TWRP, flash the supersu.zip to get root access. Reboot your phone once done.
5) Once your phone rebooted into android again, use any file explore with root access to delete recovery-from-boot.p or renamed to recovery-from-boot.bak from system folder.
6) Your TWRP should work from now on and persist through reboots.
Hope you managed to get it working. The material interface rocks!"
Also used Tapatalk and go to xiaomi.eu:
Sent from my Redmi Note 2 using Tapatalk
timberwolf60 said:
twrp link: http://en.miui.com/thread-152550-1-1.html?mobile=2, previously we can flashed by mi recovery, but now not working, so need to used my above post's method.
I get gapps downloaded through flashify:
and
Also I had save a good hint from one of the post here: " You obviously didn't read the thread. The instructions works only for those on developer ROM which has root access. If you are on stable ROM you need to do the following:
1) Download supersu.zip and transfer the file to your phone's internal memory
https://download.chainfire.eu/696/SuperSU
2) Download the twrp287.zip from this thread. Rename it to update.zip, transfer it to your phone and install through the updater app. (Not working now)
3) The updater app will reboot your phone automatically when the installation is complete. Once the screen turned off, quickly hold the volume-up button to enter recoevery. You will see TWRP recovery.
4) While in TWRP, flash the supersu.zip to get root access. Reboot your phone once done.
5) Once your phone rebooted into android again, use any file explore with root access to delete recovery-from-boot.p or renamed to recovery-from-boot.bak from system folder.
6) Your TWRP should work from now on and persist through reboots.
Hope you managed to get it working. The material interface rocks!"
Also used Tapatalk and go to xiaomi.eu:
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
Followed every single thing you wrote me, but it keeps entering Mi recovery and not twrp. It seems like mission impossible.
Ok! I would like to thank you for all your effort guiding me. Unfortunately i couldn.t do it. But managed to install multi lang rom from Hermes.
This is what i did. I often find that people don't write solution to their problems so i will write it now for naybody who needs help.
1. Downloaded fastboot ROM hermes_images_V6.7.11.0.LHMCNCH_20150826.0000.7_5.0_cn_13ba732702
2.. Enter into fastboot mode (hold Volume-down button and press Power button), when logo appears immediately release power button and it will show fastboot.
3. Download Miflash tool http://en.miui.com/a-234.html and open Miflash
4. Press browse and navigate to a folder where hermes_images_V6.7.11.0.LHMCNCH_20150826.0000.7_5.0_cn_13ba732702 is.
5. Press F5 to refresh, after refresh it should show under device some kind of numbers which represent your phone.
6. Tick "Flash all" (don't forget you will get error if your folder anywhere has spaces between words. It has to be like this "stockrom" not "stock rom".
7. Press Flash, when complete, reboot your phone
8. Download WinDroid Universal Android Toolkit v2.5
9. Download xiaomi.eu_multi_hermes_V7.0.6.0.LHMCNCI_v7-5.0
10. Follow windroid Universal toolkit (first flash twrp and then supersu) Phone has to be connected.
11. When flashing new multi lang rom, while phone is connected press Sideload ZIP and navigate to a folder where you saved new ROM.
12. Follow directions and that's it.
13. When finished, the phone will boot and you will see a small line on the bottom progressing. Wiat till completed and voila you have new multi lang stable ROM downgraded/upgraded from Chinese only Miui.
14. Don't worry if phone (touch screen) gets stuck while flashing new ROM via sideload. Wait till finished and you can pull out battery and then boot.
Thanks Timberwolf 60
Flashed twrp.img again by flashify, then you will be good
---------- Post added at 10:33 AM ---------- Previous post was at 10:29 AM ----------
stomas30 said:
Ok! I would like to thank you for all your effort guiding me. Unfortunately i couldn.t do it. But managed to install multi lang rom from Hermes.
This is what i did. I often find that people don't write solution to their problems so i will write it now for naybody who needs help.
1. Downloaded fastboot ROM hermes_images_V6.7.11.0.LHMCNCH_20150826.0000.7_5.0_cn_13ba732702
2.. Enter into fastboot mode (hold Volume-down button and press Power button), when logo appears immediately release power button and it will show fastboot.
3. Download Miflash tool http://en.miui.com/a-234.html and open Miflash
4. Press browse and navigate to a folder where hermes_images_V6.7.11.0.LHMCNCH_20150826.0000.7_5.0_cn_13ba732702 is.
5. Press F5 to refresh, after refresh it should show under device some kind of numbers which represent your phone.
6. Tick "Flash all" (don't forget you will get error if your folder anywhere has spaces between words. It has to be like this "stockrom" not "stock rom".
7. Press Flash, when complete, reboot your phone
8. Download WinDroid Universal Android Toolkit v2.5
9. Download xiaomi.eu_multi_hermes_V7.0.6.0.LHMCNCI_v7-5.0
10. Follow windroid Universal toolkit (first flash twrp and then supersu) Phone has to be connected.
11. When flashing new multi lang rom, while phone is connected press Sideload ZIP and navigate to a folder where you saved new ROM.
12. Follow directions and that's it.
13. When finished, the phone will boot and you will see a small line on the bottom progressing. Wiat till completed and voila you have new multi lang stable ROM downgraded/upgraded from Chinese only Miui.
14. Don't worry if phone (touch screen) gets stuck while flashing new ROM via sideload. Wait till finished and you can pull out battery and then boot.
Thanks Timberwolf 60
Click to expand...
Click to collapse
This was an easy way with pc. But I had no pc so need to do my method without failed. I saved your note for future reference.
stomas30 said:
Followed every single thing you wrote me, but it keeps entering Mi recovery and not twrp. It seems like mission impossible.
Click to expand...
Click to collapse
i have the same problem.i upgraded my factory rom to 7.07.0 and now i want to downgrade it. i've tryed 10 times and did nothing (can't instal root, custom recovery or custom rom)... it always sais update.zip signature verification failed. and when i flash twrp recovery and reboot phone it comes back on im recovery. i accessed in security permissions and i dont have option ''root access''. whyyyy? can anyone help me pliiiiiiz
luky_zd said:
i have the same problem.i upgraded my factory rom to 7.07.0 and now i want to downgrade it. i've tryed 10 times and did nothing (can't instal root, custom recovery or custom rom)... it always sais update.zip signature verification failed. and when i flash twrp recovery and reboot phone it comes back on im recovery. i accessed in security permissions and i dont have option ''root access''. whyyyy? can anyone help me pliiiiiiz
Click to expand...
Click to collapse
Hi luky_zd!
1. First thing you need to do is download fastboot ROM from my previous post (1). That "hermes_images_V6.7.11.0.LHMCNCH_20150826.0000.7_5. 0_cn_13ba732702". This file you will use with Miflash to downgrade to Miui 6. (Miui 7 obviously has a problem entering and installing TWRP, i don't know why). But once you downgrade to Miui 6 you will have no problem installing TWRP.
2. Once you download fastboot ROM, enter fastboot mode on your Redmi Note 2 (press volume down button and then Power button, When your phone vibrates release power button and you will enter into fastboot mode. You will see a little guy with hat on and it will write on Redmi note 2 screen fastboot.
3. Connect your phone via usb to PC.
4. Run Miflash tool, in some cases it's Miphone but it is the same thing (follow links on my post).
5. In Miflash click "browse" and navigate where you saved "hermes_images_V6.7.11.0.LHMCNCH_20150826.0000.7_5. 0_cn_13ba732702" fastbbot ROM. Be carefull not to have spaces in folder.Example if you saved fastboot rom into "New folder", rename it to Newfolder. Folder Must not have spaces between words, otherwise Miflash will give you error.
6. When you pointed to correct folder, press F5 to refresh Miflash and then it will show your phone (they will be somekind of numbers, but that is your phone.
7. In Miflash select radio button "Flash all" and click Flash. It will flash Miui v.6 to your phone and when finished you have downgraded your phone to Miui 6 from Miui 7.
Next steps are for flashing TWRP and supersu.
1. Power up your phone
2. Connect phone via usb to pc.
3. Start Windroid Universal Android Toolkit (i used v2.5.)
4. If connected ok, it will read "Online" (if not Choose Xiaomi and all the way to the bottom is Redmi Note 2)
5. While your phone is still powered on, click on "Flash TWRP" and follow instructions. Just press Ok.
6. When in TWRP (you don't have to check anything just "swipe to install". It will reboot the phone back to normal state. After that is finished then in Windroid choose Flash Supersu.
7. When that is done, your phone is rooted. When in TWRP Supersu is located in (i forgot now but either in install or advanced menu)
8. And after that when you boot back to phone next step is
9. in Windroid click "Commands" and then "Sideload ZIP" and you will enter into TWRP mode again and just navigate where you saved xiaomi.eu_multi_hermes_V7.0.6.0.LHMCNCI_v7-5.0. Twrp will do the rest. When its finished just reboot your phone and that's it.
10. Don't worry if your screen locks while flashing sideload zip (mine did also). When it's finished just take the battery out (but only when finished) and power your phone and that's it.
11. Your phone has multilanguage miui v.7.0.6.
stomas30 thank you very much for all your effort and infos!! i downloaded all from list above and in couple of days i will try that.
once again thank you
thanks people!!!!!
I have been having same problem with updater app(MIUI 7.0.7)and had almost given up on rooting hermes.his thread has given me some hope really.I will follow what you guys have dicussed and will let you know if I could do It!
aaditya99 said:
I have been having same problem with updater app(MIUI 7.0.7)and had almost given up on rooting hermes.his thread has given me some hope really.I will follow what you guys have dicussed and will let you know if I could do It!
Click to expand...
Click to collapse
While you run windroid, goto setting to selected redmi note 2. Also need to enable usb debugging in dev option. This was the easier method to root the phone. Before using windroid, in order to get root, I will flashed a china dev rom, then used flashify to flash twrp(2.8.6). img. With twrp to flash any global rom and flashed superSU to gain root.
Sent from my Redmi Note 2 using Tapatalk
I don't own or created this mod.it's look like this mod was created by unofficial Xiaomi Distributor to flash modified rom that included GApps thats marketed outside of China.
This mod allow you to flash custom kernel/recovery in locked bootloader state.it's a full working unlocked bootloader with a limitation.You will lost the modified bootloader if you flash official full rom from miflash/fastboot/updater.
Installation :
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
2. Rooted device
- download FX File Explorer
- download FX File Explorer (Root Add-On)
- download file ido-aboot-mod-image.zip
- extract ido-aboot-mod-image.zip,copy aboot and abootbak to /dev/block/bootdevice/by-name
Workaround for official full rom flash:
- miflash/fastboot -> follow installation method for unrooted device
- updater/recovery -> after rom installation flash ido-aboot-mod-image.zip from TWRP
! ! ! WARNING ! ! !
If currently installed ROM is Official MIUI ROM , DO NOT ENABLE SYSTEM MODIFICATION in TWRP. refer to this thread if you want to make modification to the system(root/gapps/xposed/etc)
Click to expand...
Click to collapse
Quoted from official TWRP page :
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
differences between locked/unlocked/modified bootloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
locked bootloader : failed to flash/boot twrp recovery
locked bootloader : successfully flash/boot twrp recovery
modified bootloader:successfully flash/boot twrp recovery(even "device unlocked:false")
Source :
Original MIUI thread : http://en.miui.com/thread-276565-1-1.html
4pda forum post : http://4pda.ru/forum/index.php?showtopic=741257&st=1640#entry49599609
Official TWRP : https://twrp.me/devices/xiaomiredmi3.html
Hi puppet13th,
I installed via Mi-Flash the twrp file, everything seemed ok, but after reboot and going in recovery mod I still find the "normal" xiaomi recovery mod. Any suggestions? Thanks mate!
churchino said:
Hi puppet13th,
I installed via Mi-Flash the twrp file, everything seemed ok, but after reboot and going in recovery mod I still find the "normal" xiaomi recovery mod. Any suggestions? Thanks mate!
Click to expand...
Click to collapse
It's look like you have boot normally before entering recovery mode.your should be able to flash in fastboot mode now.why don't u try to flash twrp in fastboot mode.
Sent from my D5503 using Tapatalk
1st flash seems to be good but recovery didn't change any good.
2nd flash with fastboot, it has error in the miflash.
3rd flash back to download mode again and it worked, but system cannot booted. Currently i'm trying to flash cutomized rom with the twrp itself but then my phone bootlooping -_-
atiprusma said:
1st flash seems to be good but recovery didn't change any good.
2nd flash with fastboot, it has error in the miflash.
3rd flash back to download mode again and it worked, but system cannot booted. Currently i'm trying to flash cutomized rom with the twrp itself but then my phone bootlooping -_-
Click to expand...
Click to collapse
If you're on official MIUI rom please refer to this https://r.tapatalk.com/shareLink?ur...e_fid=3793&share_type=t
Redmi 3 auto-bootimg thread to get working system.
Sent from my D5503 using Tapatalk
i did flash twrp .... but now redmi 3 pro has bricked. how to back my phone normaly ... sorry my bad english
my phone now only vibrate 2 times ... cannot download mode
Has anyone confirmed this to work? I'm on the Chinese Stable 7.3.2.0 ROM but planning to flash Xiaomi.eu or CM12.1 in the future. I would like to know if anyone has experience with flashing Xiaomi.eu with this TWRP; so I will probably use this method if unlocking my phone through the official way fails.
[email protected] said:
i did flash twrp .... but now redmi 3 pro has bricked. how to back my phone normaly ... sorry my bad english
my phone now only vibrate 2 times ... cannot download mode
Click to expand...
Click to collapse
Updated 1st post,please read the warning.to force the phone enter download mode simultaneously press "volume +" + "volume -" + power button.
If you have successfully flashed the ido-TWRP-3.0.2.0-miflash.zip from miflash,you should be able to enter TWRP and then flash ido-auto-bootimg.zip to get the system boot normally.
puppet13th said:
Updated 1st post,please read the warning.to force the phone enter download mode simultaneously press "volume +" + "volume -" + power button.
If you have successfully flashed the ido-TWRP-3.0.2.0-miflash.zip from miflash,you should be able to enter TWRP and then flash ido-auto-bootimg.zip to get the system boot normally.
Click to expand...
Click to collapse
How about if we try to install Xiaomi.eu? Do we still have to flash the auto-bootimg or can it be used right away?
bloodvayne said:
How about if we try to install Xiaomi.eu? Do we still have to flash the auto-bootimg or can it be used right away?
Click to expand...
Click to collapse
If that was official MIUI rom,you should install auto-bootimg.
Sent from my D5503 using Tapatalk
puppet13th said:
If you're on official MIUI rom please refer to this https://r.tapatalk.com/shareLink?ur...e_fid=3793&share_type=t
Redmi 3 auto-bootimg thread to get working system.
Sent from my D5503 using Tapatalk
Click to expand...
Click to collapse
I assume if multirom was modified the official stable rom i flashed before and I did flash the autoboot-img, but the mistake i also did is allowing modifying system at the first twrp screen.
And now i just flashed with manIT dev global rom by miflash.
And it will have the original mi recovery i'm sure.
Sent from my Redmi 3 using Tapatalk
im a bit confused about the steps to do? could you please do the tut more step by step your noobs ?
so it's rooted when we finish (SUPERSU included)?????
do you know can it avoid root checking (such as Puzzle & Dragon Japanese verison)?
Someone confirmed work with Redmi3 Pro (international version), help me here
http://en.miui.com/thread-282476-1-1.html
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
jpg3927 said:
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
SH1M4BD3 said:
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
Click to expand...
Click to collapse
so. do i need to unlock bootloader in offical way to flash other custom roms?
whenever I choose download mode via vol up + power, I only got blank screen
when I tried to flash using miflash in fastboot menu, error "device locked"
jpg3927 said:
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
jpg3927 said:
so. do i need to unlock bootloader in offical way to flash other custom roms?
Click to expand...
Click to collapse
all the answer already in the 1st post.
This mod allow you to flash custom kernel/recovery in locked bootloader state.it's a full working unlocked bootloader with a limitation.You will lost the modified bootloader if you flash official full rom from miflash/fastboot/updater.
Click to expand...
Click to collapse
SH1M4BD3 said:
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
Click to expand...
Click to collapse
i think there is no DM verity in custom rom.
Paleskin said:
whenever I choose download mode via vol up + power, I only got blank screen
when I tried to flash using miflash in fastboot menu, error "device locked"
Click to expand...
Click to collapse
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
Click to expand...
Click to collapse
everytime I tried to access download mode, it only give blank black screen and when I connect it to the computer, nothing shows up
Version 10.2.26.0
Version 10.2.24.0 ------------ > Stock/Root
Version 10.2.9.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T4Ump said:
Version 10.2.24.0 - Link
Click to expand...
Click to collapse
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
vtec303 said:
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
Click to expand...
Click to collapse
Fastboot flash boot.img
It's only magisk for 10.2.24
You can create your own if you want, it's just 30s faster
Code:
fastboot flash boot boot.img
Thank you so much for posting this. I'd been trying for 2 days with twrp and magisk (19.1 and 19.2) and could never get past the recovery bootloop on my Mi 9.
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Does anyone have boot.img V10.2.9.0.PFAMIXM? I wanna try root, but only need that file
xxx
T4Ump said:
xxx
Click to expand...
Click to collapse
Hi, thanks for the patched one. Do you still have the stock one? My phone stuck at recovery mode
Edited: nvm. I'll download the fastboot ROM. Thank you anyway.
realm9thfeb said:
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Click to expand...
Click to collapse
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
PriPhaze said:
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
Click to expand...
Click to collapse
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
PriPhaze said:
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
Click to expand...
Click to collapse
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
T4Ump said:
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
Click to expand...
Click to collapse
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Click to expand...
Click to collapse
Because once I moved back to revolution OS ( I sawp of ROMs quite often ) I realized that my entire apps restored with titanium were crashing , and the few that actually open correctly didn't hold my data.
They were as if you just download them for the first time from the store.
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
Click to expand...
Click to collapse
No, i dont have this problem.
Root images updated to 19.2 magisk.
10.9.20 require wipe all data after flash patched image, this is not practical at all.
1. you stuck in this rom unless you want to wipe all data every time there is new rom.
2. Magisk bug existed in the latest global stable rom, notification prompted everytime you open Magisk to install zip, you can only ignore it or installation zip brick the phone.
10.2.26.0 root/stock
Can I use those with locked bootloader ?
Sent from my MI 9 using Tapatalk
How to Install TWRP:
Note: that version is UNOFFICIAL TWRP-3.3.0-0524
.Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here https://devsjournal.com/usb-drivers-...d-devices.html
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here https://devsjournal.com/download-min...boot-tool.html
Pre-Requisite 3
Your device needs this with unlocked bootloader
if it is not unlocked do the tutorial to unlock HERE
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
------------------------------------------------
1) Download TWRP: recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
2) After getting the TWRP file put it in the same ADB folder
3) Now start the phone in bootlader by doing this:
Connect the phone to the PC
Start the Minimal ADB & Fastboot program from the PC
On the PC screen, type:
adb reboot bootloader
(A request may appear on the phone screen with permission of USB debugging, accept it)
The phone will now restart in Bootloader mode.
4) Now that you are in bootloader mode, from the PC, from the screen
Minimal ADB and Fastboot type:
fastboot flash recovery recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
Sending 'recovery' (98304 KB) OKAY [ 5.970s]
Writing 'recovery' OKAY [ 0.539s]
Done !
---------
.How to Install Root Magisk:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Done !
Credits:
Maker: wzsx150
Developer Team: LR.Team
Is there any issues related to this recovery?
firemax13 said:
Is there any issues related to this recovery?
Click to expand...
Click to collapse
I had no problem with this recovery
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
luigi0824 said:
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
Click to expand...
Click to collapse
I've read somewhere that you need to flash vbmeta.img if verified boot is enabled, however I couldn't find the correct img to flash anywhere. Maybe if we ask someone that has the phone already rooted.
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
BlueIce84 said:
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
Click to expand...
Click to collapse
What method would you follow to install the stock rom, like you, it comes with the bootloader unlocked by the seller and I don't know how to flash stock rom
Use this guide:
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945
carlshark said:
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
Click to expand...
Click to collapse
I gave up on clublenovo. They require SMS authentication to post so even when you log in you can't post and download. TWRP 3.3.1 is also available from 4PDA. That's what I used.
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
luigi0824 said:
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
Click to expand...
Click to collapse
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
thorvall said:
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
Click to expand...
Click to collapse
Will I lose any data if I decrypt my phone? And where do I find that pin code?
luigi0824 said:
Will I lose any data if I decrypt my phone? And where do I find that pin code?
Click to expand...
Click to collapse
Its the pin code you use to open the phone.
And enabling does not remove data, but it does give twrp read/write permission
Is it possible to implement support for OTA updates through TWRP?
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
butterx2341 said:
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
Click to expand...
Click to collapse
If you boot your ZUI system, your twrp will be overwritten by a stock recovery.
However if you flash magisk, your twrp won't be overwritten anymore. If you want to preserve your twrp after rebooting on ZUI, you need to flash magisk.
whatever I do.. the twrp wont be installed (let alone the root/magisk). ADB does say the twrp is flashed... but it will always boot to or the bootloader.. or the system (not the lenovo recovery or twrp recovery). Quiet frustrating... what can I do? Want this boy rooted!
Edit: done. The twrp linked in the tutorial is not correct use this one: https://drive.google.com/file/d/13mt0RLmT83BHSUBpH-J7EhaeZQ-MPYUu/view
That worked!
I want to unlock my bootloader but the site where you request the image file for unlocking it wont accept my IMEI1.. any idea guys?
Keeping it short:
This is the official STABLE global MIUI 11 Rom for Mi 9T
Official download links:
For rooted devices - Recovery full zip (2.3GB)
For stock unrooted devices - OTA upgrade zip (779MB)
Magisk Root without TWRP:
Objectives :
Have root using Magisk
Be able to install OTA from the settings without bootloops
Avoid boot loop
Very important :
Your phone has to have an unlocked bootloader
Your phone has to have stock recovery. TWRP WILL cause bootloop for root and/or OTA updates from system.
I like to have root with magisk and don't want to install TWRP because I want to be able to install OTA from system without boot loops. This guide will help you achieve this with ease.
Download the rooted boot image for your correct ROM version from here: https://mega.nz/#F!1kwETAwD!O5iPgAaocQ8WxfUK2V7RVA
Restart your phone in fastboot mode (hold vol-down and power buttons for a few seconds)
Flash the rooted boot image using fastboot. (fastboot flash boot Magisk_9T_Global_V11.0.1.0.PFJMIXM.img)* **
Reboot device (fastboot.exe reboot)
(install then) Open Magisk manager
Follow instruction shown in the magisk manager for adding necessary files (you might not need this)
*Download the latest Minimal ADB /fastboot and USB drivers for your device if you are having a problem with this.
** Using some data cables will result in your fastboot not seeing your device (showing < waiting for any device >). If you have this problem change your USB cable with another or use the one that comes with the device
I have attached the following root files:
V10.3.11.0.PFJMIXM (MIUI10) global stable room - Global 9T stock boot image
V11.0.1.0.PFJMIXM (MIUI11) global stable room - Global 9T stock boot image
V11.0.1.0.PFJMIXM (MIUI11) global stable room - Global 9T Magisk rooted boot image
Things to consider doing after the update:
Remove ads using this guide: https://miblog.co/miui-remove-system-ads/
Enable Android style notification (instead of the default MiUI one) from the notification settings
Disable option: “Settings / Additional settings / Privacy / Location / Scanning / WLAN scanning” to improve battery life
Use this guide to install Xiaomi Mi 9 Google Camera (GCam) (no root needed): https://miblog.co/xiaomi-mi9-google-camera/
Disable autostart for all apps excluding the ones you want to autostart to fix the battery drainage issue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey, quick question. I'm trying to install the new MIUI11 stock global ROM for my Mi 9T. The thing is, the phone's updater takes forever to download and the download itself even gets cancelled out of nowhere (my internet is pretty slow) Can I just download the 779MB OTA Upgrade zip you provided and move it to my phone and proceed selecting it from the updater app? Is it the same file you get as downloading it from the app? I'm on global, PFJMIXM version 10.3.11.0
Thanks!
Danielxgl said:
Hey, quick question. I'm trying to install the new MIUI11 stock global ROM for my Mi 9T. The thing is, the phone's updater takes forever to download and the download itself even gets cancelled out of nowhere (my internet is pretty slow) Can I just download the 779MB OTA Upgrade zip you provided and move it to my phone and proceed selecting it from the updater app? Is it the same file you get as downloading it from the app? I'm on global, PFJMIXM version 10.3.11.0
Thanks!
Click to expand...
Click to collapse
I'm not sure how the update app does the file check. Can you try it and report?
I know that if you're rooted, the OTA will fail to install and the update app automatically starts downloading the full ROM, which is pretty cool.
Kiwironic said:
I'm not sure how the update app does the file check. Can you try it and report?
I know that if you're rooted, the OTA will fail to install and the update app automatically starts downloading the full ROM, which is pretty cool.
Click to expand...
Click to collapse
Wish I could try it, but my update app miraculously decided not to fail this time, and I was able to update the phone normally. Maybe someone else could try it?
What im i do wrong if i get twrp while trying to boot miui? Installed Patched boot installed firmware cannot boot
Still Android 9, no?
SeriousX said:
What im i do wrong if i get twrp while trying to boot miui? Installed Patched boot installed firmware cannot boot
Click to expand...
Click to collapse
Flash the stock or rooted boot image and recovery for your device. It should work normally. That's my main reason to root without TWRP
robi10101298 said:
Still Android 9, no?
Click to expand...
Click to collapse
Yes
Kiwironic said:
Keeping it short:
This is the official STABLE global MIUI 11 Rom for Mi 9T
Official download links:
For rooted devices - Recovery full zip (2.3GB)
For stock unrooted devices - OTA upgrade zip (779MB)
Magisk Root without TWRP:
Download the rooted boot image for your correct ROM version from here: https://mega.nz/#F!1kwETAwD!O5iPgAaocQ8WxfUK2V7RVA
Restart your phone in fastboot mode (hold vol-down and power buttons for a few seconds)
Flash the rooted boot image using fastboot. (fastboot flash boot Magisk_9T_Global_V11.0.1.0.PFJMIXM.img)* **
Reboot device (fastboot.exe reboot)
(install then) Open Magisk manager
Follow instruction shown in the magisk manager for adding necessary files (you might not need this)
*Download the latest Minimal ADB /fastboot and USB drivers for your device if you are having a problem with this.
** Using some data cables will result in your fastboot not seeing your device (showing < waiting for any device >). If you have this problem change your USB cable with another or use the one that comes with the device
I have attached the following root files:
V10.3.11.0.PFJMIXM (MIUI10) global stable room - Global 9T stock boot image
V11.0.1.0.PFJMIXM (MIUI11) global stable room - Global 9T stock boot image
V11.0.1.0.PFJMIXM (MIUI11) global stable room - Global 9T Magisk rooted boot image
Things to consider doing after the update:
Remove ads using this guide: https://miblog.co/miui-remove-system-ads/
Enable Android style notification (instead of the default MiUI one) from the notification settings
Disable option: “Settings / Additional settings / Privacy / Location / Scanning / WLAN scanning” to improve battery life
Use this guide to install Xiaomi Mi 9 Google Camera (GCam) (no root needed): https://miblog.co/xiaomi-mi9-google-camera/
Disable autostart for all apps excluding the ones you want to autostart to fix the battery drainage issue
Click to expand...
Click to collapse
If I don't want root anymore I can install this via Twrp: Recovery full zip (2.3GB)rooted devices + V11.0.1.0.PFJMIXM (MIUI11) global stable room - Global 9T stock boot image
Is this right?
Drakar88 said:
If I don't want root anymore I can install this via Twrp: Recovery full zip (2.3GB)rooted devices + V11.0.1.0.PFJMIXM (MIUI11) global stable room - Global 9T stock boot image
Is this right?
Click to expand...
Click to collapse
Yes the full rom. But no need to flash boot, flashing the full image will automatically rewrite the boot image to a stock unrooted one.
Anybody who needed a root boot image, can send me the version of their ROM or send me the boot image from their phone and I'll root it for you using magisk. You can do that yourself as well by downloading the full ROM zip file, take the boot file and use magisk to create a root boot image. Can provide more details if you don't know how to do it.
Kiwironic said:
Anybody who needed a root boot image, can send me the version of their ROM or send me the boot image from their phone and I'll root it for you using magisk. You can do that yourself as well by downloading the full ROM zip file, take the boot file and use magisk to create a root boot image. Can provide more details if you don't know how to do it.
Click to expand...
Click to collapse
Do provide more details. I'm on stock miui (davinciin), with unlocked bl and would like to root tf outta this
geeknoob said:
Do provide more details. I'm on stock miui (davinciin), with unlocked bl and would like to root tf outta this
Click to expand...
Click to collapse
I wrote a guide and made some videos here :
https://forum.xda-developers.com/showpost.php?p=80835573&postcount=1
Updated the post because people using the guide while having TWRP will have bootloop . Please read the instructing carefully. You need a stock recovery for this root to work and for OTA to install from settings
Thanks for this guide, I couldn't get official TWRP to stick so that I could flash Magisk. I used your guide and now I have root. Many thanks
i need to ask.
when miui release a new update i usually update and after that i had to re flash the "recovery-TWRP-3.3.1-0916-REDMI_K20-CN-wzsx150" then again flash the magisk.
but this time i try to install it boot the recovery but when i go to the internal memory it appear a lot of weird folders and it won't allow me to paste the magisk to install it.
"+KPcZ3jsjybn9M850BgrhB"
3zitjokdIMQE++oQFL8PxA
9AmJcdRgO71ehKtIhWg3oB
9Y0e9H1NkAr4FMzOz9X,UD
882G73cfQNPbaXm2zAzXiD
---------- Post added at 11:34 AM ---------- Previous post was at 11:24 AM ----------
Jctatis said:
i need to ask.
when miui release a new update i usually update and after that i had to re flash the "recovery-TWRP-3.3.1-0916-REDMI_K20-CN-wzsx150" then again flash the magisk.
but this time i try to install it boot the recovery but when i go to the internal memory it appear a lot of weird folders and it won't allow me to paste the magisk to install it.
"+KPcZ3jsjybn9M850BgrhB"
3zitjokdIMQE++oQFL8PxA
9AmJcdRgO71ehKtIhWg3oB
9Y0e9H1NkAr4FMzOz9X,UD
882G73cfQNPbaXm2zAzXiD
Click to expand...
Click to collapse
NVM already fixed installed the twrp-3.3.1-0-davinci.img and flashed the magisk v.20
Kiwironic said:
Anybody who needed a root boot image, can send me the version of their ROM or send me the boot image from their phone and I'll root it for you using magisk. You can do that yourself as well by downloading the full ROM zip file, take the boot file and use magisk to create a root boot image. Can provide more details if you don't know how to do it.
Click to expand...
Click to collapse
Thanks for this! Would you be able to make a patched boot.img for V11.0.5.0.QFJMIXM? Please? Mi net is too bad to download the whole rom
galelouch993 said:
Thanks for this! Would you be able to make a patched boot.img for V11.0.5.0.QFJMIXM? Please? Mi net is too bad to download the whole rom
Click to expand...
Click to collapse
Just downloaded the whole ROM with no problem from:
https://mirom.ezbox.idv.tw/en/phone/davinci/
Anyway, try with the following - patched from my Magisk Canary:
https://mega.nz/file/09M13QhI#4AXcEYviHw_1xyhCoDYZh_J41Iu58ulozuRJbhQZP6w
You can test just by temporarily booting to the patched image (if it boots ok, then you would really flash it):
fastboot boot boot-Magisk_Canary_20405-davinci_v11.0.5.0_QFJIMXM_aaab5b40c7_10.0.img
Download and install the corresponding Canary Magisk Manager e.g. app-release.apk, from:
https://github.com/topjohnwu/magisk_files/find/canary?q=
If you have a bootloop it could be due to the previously installed Magisk modules - you would need to disable them in TWRP:
/data/adb/modules
and to every subfolder add an empty file named "disable" (or delete the whole modules folder)
zgfg said:
Just downloaded the whole ROM with no problem from:
https://mirom.ezbox.idv.tw/en/phone/davinci/
Anyway, try with the following - patched from my Magisk Canary:
https://mega.nz/file/09M13QhI#4AXcEYviHw_1xyhCoDYZh_J41Iu58ulozuRJbhQZP6w
You can test just by temporarily booting to the patched image (if it boots ok, then you would really flash it):
fastboot boot boot-Magisk_Canary_20405-davinci_v11.0.5.0_QFJIMXM_aaab5b40c7_10.0.img
Download and install the corresponding Canary Magisk Manager e.g. app-release.apk, from:
https://github.com/topjohnwu/magisk_files/find/canary?q=
If you have a bootloop it could be due to the previously installed Magisk modules - you would need to disable them in TWRP:
/data/adb/modules
and to every subfolder add an empty file named "disable" (or delete the whole modules folder)
Click to expand...
Click to collapse
Ty very much for replying with a complete guide and files needed. I managed to get a boot.img for my version and patched it successfully with stable magisk manager. I'm very grateful for your efforts tho.
Btw, any special reason for using canary builds in your steps?
9
galelouch993 said:
Ty very much for replying with a complete guide and files needed. I managed to get a boot.img for my version and patched it successfully with stable magisk manager. I'm very grateful for your efforts tho.
Btw, any special reason for using canary builds in your steps?
Click to expand...
Click to collapse
Canary has some early fixes and features, but also some new bugs
E.g., for a long time, Canary has a new UI. It was buggy and with issues but now is already good and stable andI I like its new features
But just realized that V4A cannot install driver with yesterday's Magisk Canary 20401 so I returned back to Canary 20405
Edit:
Btw, you can try Magisk Manager Canary - install from the link in my previous post.
It should work with your stable Magisk
By using Stable Channel, you can always return to stable Manager version