I don't own or created this mod.it's look like this mod was created by unofficial Xiaomi Distributor to flash modified rom that included GApps thats marketed outside of China.
This mod allow you to flash custom kernel/recovery in locked bootloader state.it's a full working unlocked bootloader with a limitation.You will lost the modified bootloader if you flash official full rom from miflash/fastboot/updater.
Installation :
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
2. Rooted device
- download FX File Explorer
- download FX File Explorer (Root Add-On)
- download file ido-aboot-mod-image.zip
- extract ido-aboot-mod-image.zip,copy aboot and abootbak to /dev/block/bootdevice/by-name
Workaround for official full rom flash:
- miflash/fastboot -> follow installation method for unrooted device
- updater/recovery -> after rom installation flash ido-aboot-mod-image.zip from TWRP
! ! ! WARNING ! ! !
If currently installed ROM is Official MIUI ROM , DO NOT ENABLE SYSTEM MODIFICATION in TWRP. refer to this thread if you want to make modification to the system(root/gapps/xposed/etc)
Click to expand...
Click to collapse
Quoted from official TWRP page :
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
differences between locked/unlocked/modified bootloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
locked bootloader : failed to flash/boot twrp recovery
locked bootloader : successfully flash/boot twrp recovery
modified bootloader:successfully flash/boot twrp recovery(even "device unlocked:false")
Source :
Original MIUI thread : http://en.miui.com/thread-276565-1-1.html
4pda forum post : http://4pda.ru/forum/index.php?showtopic=741257&st=1640#entry49599609
Official TWRP : https://twrp.me/devices/xiaomiredmi3.html
Hi puppet13th,
I installed via Mi-Flash the twrp file, everything seemed ok, but after reboot and going in recovery mod I still find the "normal" xiaomi recovery mod. Any suggestions? Thanks mate!
churchino said:
Hi puppet13th,
I installed via Mi-Flash the twrp file, everything seemed ok, but after reboot and going in recovery mod I still find the "normal" xiaomi recovery mod. Any suggestions? Thanks mate!
Click to expand...
Click to collapse
It's look like you have boot normally before entering recovery mode.your should be able to flash in fastboot mode now.why don't u try to flash twrp in fastboot mode.
Sent from my D5503 using Tapatalk
1st flash seems to be good but recovery didn't change any good.
2nd flash with fastboot, it has error in the miflash.
3rd flash back to download mode again and it worked, but system cannot booted. Currently i'm trying to flash cutomized rom with the twrp itself but then my phone bootlooping -_-
atiprusma said:
1st flash seems to be good but recovery didn't change any good.
2nd flash with fastboot, it has error in the miflash.
3rd flash back to download mode again and it worked, but system cannot booted. Currently i'm trying to flash cutomized rom with the twrp itself but then my phone bootlooping -_-
Click to expand...
Click to collapse
If you're on official MIUI rom please refer to this https://r.tapatalk.com/shareLink?ur...e_fid=3793&share_type=t
Redmi 3 auto-bootimg thread to get working system.
Sent from my D5503 using Tapatalk
i did flash twrp .... but now redmi 3 pro has bricked. how to back my phone normaly ... sorry my bad english
my phone now only vibrate 2 times ... cannot download mode
Has anyone confirmed this to work? I'm on the Chinese Stable 7.3.2.0 ROM but planning to flash Xiaomi.eu or CM12.1 in the future. I would like to know if anyone has experience with flashing Xiaomi.eu with this TWRP; so I will probably use this method if unlocking my phone through the official way fails.
[email protected] said:
i did flash twrp .... but now redmi 3 pro has bricked. how to back my phone normaly ... sorry my bad english
my phone now only vibrate 2 times ... cannot download mode
Click to expand...
Click to collapse
Updated 1st post,please read the warning.to force the phone enter download mode simultaneously press "volume +" + "volume -" + power button.
If you have successfully flashed the ido-TWRP-3.0.2.0-miflash.zip from miflash,you should be able to enter TWRP and then flash ido-auto-bootimg.zip to get the system boot normally.
puppet13th said:
Updated 1st post,please read the warning.to force the phone enter download mode simultaneously press "volume +" + "volume -" + power button.
If you have successfully flashed the ido-TWRP-3.0.2.0-miflash.zip from miflash,you should be able to enter TWRP and then flash ido-auto-bootimg.zip to get the system boot normally.
Click to expand...
Click to collapse
How about if we try to install Xiaomi.eu? Do we still have to flash the auto-bootimg or can it be used right away?
bloodvayne said:
How about if we try to install Xiaomi.eu? Do we still have to flash the auto-bootimg or can it be used right away?
Click to expand...
Click to collapse
If that was official MIUI rom,you should install auto-bootimg.
Sent from my D5503 using Tapatalk
puppet13th said:
If you're on official MIUI rom please refer to this https://r.tapatalk.com/shareLink?ur...e_fid=3793&share_type=t
Redmi 3 auto-bootimg thread to get working system.
Sent from my D5503 using Tapatalk
Click to expand...
Click to collapse
I assume if multirom was modified the official stable rom i flashed before and I did flash the autoboot-img, but the mistake i also did is allowing modifying system at the first twrp screen.
And now i just flashed with manIT dev global rom by miflash.
And it will have the original mi recovery i'm sure.
Sent from my Redmi 3 using Tapatalk
im a bit confused about the steps to do? could you please do the tut more step by step your noobs ?
so it's rooted when we finish (SUPERSU included)?????
do you know can it avoid root checking (such as Puzzle & Dragon Japanese verison)?
Someone confirmed work with Redmi3 Pro (international version), help me here
http://en.miui.com/thread-282476-1-1.html
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
jpg3927 said:
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
SH1M4BD3 said:
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
Click to expand...
Click to collapse
so. do i need to unlock bootloader in offical way to flash other custom roms?
whenever I choose download mode via vol up + power, I only got blank screen
when I tried to flash using miflash in fastboot menu, error "device locked"
jpg3927 said:
can i install custom roms on this forum via this method on locked bootloader?
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
jpg3927 said:
so. do i need to unlock bootloader in offical way to flash other custom roms?
Click to expand...
Click to collapse
all the answer already in the 1st post.
This mod allow you to flash custom kernel/recovery in locked bootloader state.it's a full working unlocked bootloader with a limitation.You will lost the modified bootloader if you flash official full rom from miflash/fastboot/updater.
Click to expand...
Click to collapse
SH1M4BD3 said:
Nope, without unlocking BL or modified the Abot files, its too risky as it said used DM verify
Click to expand...
Click to collapse
i think there is no DM verity in custom rom.
Paleskin said:
whenever I choose download mode via vol up + power, I only got blank screen
when I tried to flash using miflash in fastboot menu, error "device locked"
Click to expand...
Click to collapse
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
Click to expand...
Click to collapse
everytime I tried to access download mode, it only give blank black screen and when I connect it to the computer, nothing shows up
Related
Heres the latest update from LG.
Must be at least 20f/g with TWRP to flash this.
To get TWRP go here: (Kdz to 20f if on 20g)
https://forum.xda-developers.com/showthread.php?t=3533338
Do NOT wipe system or you might get stuck in twrp bootloop.
Includes new 20H modem.
**********************
FLASHING INSTRUCTIONS
**********************
1. WARNING, MUST BE IN 20F/G. IF ON LINEAGE, DO NOT FLASH. YOU MUST KDZ TO 20F OR RESTORE 20F BACKUP FIRST.
2. DO NOT FORMAT SYSTEM.
2. TWRP BACKUP FIRST
3. Flash from TWRP.
DOWNLOAD
LG-V521-20H-Stock-Rooted.zip
https://www.androidfilehost.com/?fid=745425885120726661
Sent from my LG-V521 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does it include the modem?
I'm going to try from lineage.
Edit -flashed from lineage worked fine. It rebooted straight from twrp so i wasn't sure if the flash comppeted. After waiting at bootscreen i still wasn't sure so i did the volume down, power button combo and it booted into system fine.
Edit 2 - no root and loss twrp
Airtioteclint said:
Does it include the modem?
I'm going to try from lineage.
Edit -flashed from lineage worked fine. It rebooted straight from twrp so i wasn't sure if the flash comppeted. After waiting at bootscreen i still wasn't sure so i did the volume down, power button combo and it booted into system fine.
Edit 2 - no root and loss twrp
Click to expand...
Click to collapse
Lineage always messes up going back to stock roms. I've had this problem to on 20g to after being on lineage. You'll have to kdz to 20f and get twrp. I had put this on the flashing instructions you must be on 20f/g. .
It does include modem.
Sent from my SM-G955U using Tapatalk
MicroMod777 said:
Lineage always messes up going back to stock roms. I've had this problem to on 20g to after being on lineage. You'll have to kdz to 20f and get twrp. I had put this on the flashing instructions you must be on 20f/g. .
It does include modem.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Yeah kdz 20f and was able to get root back. Reinstalled your 20h and everything's working flawlessly. I was having problems with my touchscreen being a little laggy and I think your rom fixed it. :good:
Any way to install this update from SD card on stock recovery? I get error Everytime the regular way. Thanks
Hawksronny said:
Any way to install this update from SD card on stock recovery? I get error Everytime the regular way. Thanks
Click to expand...
Click to collapse
Impossible.
Sent from my SM-G955U using Tapatalk
MicroMod777 said:
Impossible.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
So even though there is an option to update from SD in stock recovery, it's impossible? Just want to confirm. Just doesn't make sense to me
Hawksronny said:
So even though there is an option to update from SD in stock recovery, it's impossible? Just want to confirm. Just doesn't make sense to me
Click to expand...
Click to collapse
Then try it! lol
Sent from my SM-G955U using Tapatalk
MicroMod777 said:
Then try it! lol
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
I'm no developer. I just want to update without rooting or custom recovery. I try it 2 ways, and fails the normal way, and the stock recovery doesn't recognize the update.zip the 2nd way. I probably have it named wrong. Either way, I doubt it's impossible. Any help would be appreciated. Thanks
Hawksronny said:
I'm no developer. I just want to update without rooting or custom recovery. I try it 2 ways, and fails the normal way, and the stock recovery doesn't recognize the update.zip the 2nd way. I probably have it named wrong. Either way, I doubt it's impossible. Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Its very, very impossible to flash this rom except per twrp.
LG uses security keys to flash anything from stock recovery.
Sent from my SM-G955U using Tapatalk
I don't want to flash a rom. I asked how to flash the stock update from the stock recovery because the update errors out when I try to do it the normal ota way. There is an option to update from SD in the stock recovery. It's just that it doesn't recognize the stock update.zip in the stock recovery because I probably don't have it named right. Was just wondering if anyone knew what to name it, where to download the update.zip, how to update with it etc. Didn't mean to offend anybody ?
Hawksronny said:
I don't want to flash a rom. I asked how to flash the stock update from the stock recovery because the update errors out when I try to do it the normal ota way. There is an option to update from SD in the stock recovery. It's just that it doesn't recognize the stock update.zip in the stock recovery because I probably don't have it named right. Was just wondering if anyone knew what to name it, where to download the update.zip, how to update with it etc. Didn't mean to offend anybody ?
Click to expand...
Click to collapse
No offence taken. All good. You just can't do that. [emoji4]
Sent from my SM-G955U using Tapatalk
Should i be able to downgrade from 20h to 20 f to root. I just got a new one on a warranty exchange and get an error in lgup at 4%. Sorry if this is off topic
same question, some body can check antirollback, this tab can downgrade from v521 v20h to v20f or mashmallow or not
Thanks
[ROM] T-Mobile LG G Pad X V521 20i Stock ROM Rooted TWRP\FF Backups Release 7/1/2017
A TWRP backup of a stock rooted v52120i:
Code:
https://drive.google.com/file/d/0B6L7kMY8TK7uZ2lPMUhtVmRINUk/view?usp=sharing
FlashFire Restore from backup:
Code:
https://drive.google.com/file/d/0B6L7kMY8TK7uQlFfY3lJTVl1X1k/view?usp=sharing
To install, move files to designated place (twrp/backups/{phoneid}/) or (FlashFire/backups).
at least 20f and root required.
saw nobody put it up so i decided i would.
Mine still has rooted 10c. How to update to this latest ROM and rooted ? TIA
Does 7.0 improve idling/sleeping battery ?
Yes that is probably one of its biggest changes vs MM.
Follow this guide to a T: https://forum.xda-developers.com/lg-g-pad-83/development/nougat-7-0-v521-guide-to-update-v521-lg-t3533338
then boot into recovery, copy my TWRP backup to internal/microsd/usb, in TWRP restore the system and boot partitions that are automatically checked.
Download the latest systemless or system mode supersu.zip and copy it to the main install folder C:\Program Files x86\Minimal ADB and Fastboot\.
Then in twrp click ADB sideload > do not check anything to erase > open minimal adb/fastboot and type adb sideload whateveryounamedyoursupersuzipfile.zip and you should be good to go.
Shockey0710 said:
Yes that is probably one of its biggest changes vs MM.
Follow this guide to a T: https://forum.xda-developers.com/lg-g-pad-83/development/nougat-7-0-v521-guide-to-update-v521-lg-t3533338
then boot into recovery, copy my TWRP backup to internal/microsd/usb, in TWRP restore the system and boot partitions that are automatically checked.
Download the latest systemless or system mode supersu.zip and copy it to the main install folder C:\Program Files x86\Minimal ADB and Fastboot\.
Then in twrp click ADB sideload > do not check anything to erase > open minimal adb/fastboot and type adb sideload whateveryounamedyoursupersuzipfile.zip and you should be good to go.
Click to expand...
Click to collapse
how did u get 20i ? and got it into permissive mode to obtain root ? know anything about 20h/i changelog ?
abced123 said:
how did u get 20i ? and got it into permissive mode to obtain root ? know anything about 20h/i changelog ?
Click to expand...
Click to collapse
i havent found a changelog nor have i looked though but new kernel version and various security fixes tho, and yes its getenforce permissive. from tmobile fota.
Can I use this in LG-V500???
I have a locked bootloader, twrp, didn't make a backup, the instructions I followed were from this thread https://forum.xda-developers.com/redmi-note-3/how-to/kate-guide-install-lineage-os-locked-t3546154 can anyone help? Can I just flash the latest MIUI global rom via TWRP, or do I need to do something on the computer?
You cannot flash MIUI from twrp directly else you will get bootloop. Either you flash MIUI For EU (haven't used it,juat heard of it). Or flash Miui with pc.
Sent from my Pixel XL using Tapatalk
deepjyoti30 said:
You cannot flash MIUI from twrp directly else you will get bootloop. Either you flash MIUI For EU (haven't used it,juat heard of it). Or flash Miui with pc.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Hmm I don't quite get it, what do I actually do? Can you make me a step by step guide? I know I post a lot of question, but don't want to mess things up, and this phone is very different from others when it comes to flashing, unlocking bootloader and other stuff...
@Acoca
http://en.miui.com/thread-235865-1-1.html
bloodytolits said:
@Acoca
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
Wow didn't think it would be this hard, maybe it's not hard but I don't understand half of the instructios... Thank you anyways, I'll try to follow the instructions you provided me. :good:
Acoca said:
Wow didn't think it would be this hard, maybe it's not hard but I don't understand half of the instructios... Thank you anyways, I'll try to follow the instructions you provided me. :good:
Click to expand...
Click to collapse
I think you can probably skip to the flashing part. If you've done what you said on the 1st post then that means drivers are already installed and the PC(miflash) detects your phone. Flash in edl mode, probably won't work on fastboot.
If you want to try MIUI but don't want to do that procedure(and still have twrp) I'd suggest just installing the xiaomi.eu ROM. You just need to flash that in twrp
bloodytolits said:
I think you can probably skip to the flashing part. If you've done what you said on the 1st post then that means drivers are already installed and the PC(miflash) detects your phone. Flash in edl mode, probably won't work on fastboot.
Click to expand...
Click to collapse
Okay so if I understood this are the steps:
1. Boot to fastboot mode and then to EDL mode
2. In MiFlash choose the fastboot rom without replaced recovery.img and flash
I deleted everything of my friends laptop, since I used his laptop to do this all.. So I just follow the steps from the thread how to flash LOS, and only flash the rom itself? Thank you!
Acoca said:
Okay so if I understood this are the steps:
1. Boot to fastboot mode and then to EDL mode
2. In MiFlash choose the fastboot rom without replaced recovery.img and flash
I deleted everything of my friends laptop, since I used his laptop to do this all.. So I just follow the steps from the thread how to flash LOS, and only flash the rom itself? Thank you!
Click to expand...
Click to collapse
Yup pretty much. If you want to keep twrp then just flash xiaomi.eu in twrp, it's basically MIUI without the bloats.
Be sure to flash the correct rom for your device, the download link have too much different ROMs in it. Here's the name of the ROM for our device:
Kenzo: xiaomi.eu_multi_HMNote3Pro_*version*.zip
Kate: xiaomi.eu_multi_HMNote3SE_*version*.zip
bloodytolits said:
Yup pretty much. If you want to keep twrp then just flash xiaomi.eu in twrp, it's basically MIUI without the bloats.
Be sure to flash the correct rom for your device, the download link have too much different ROMs in it. Here's the name of the ROM for our device:
Kenzo: xiaomi.eu_multi_HMNote3Pro_*version*.zip
Kate: xiaomi.eu_multi_HMNote3SE_*version*.zip
Click to expand...
Click to collapse
Hope I don't mess this up... Thank you very much!
bloodytolits said:
Yup pretty much. If you want to keep twrp then just flash xiaomi.eu in twrp, it's basically MIUI without the bloats.
Be sure to flash the correct rom for your device, the download link have too much different ROMs in it. Here's the name of the ROM for our device:
Kenzo: xiaomi.eu_multi_HMNote3Pro_*version*.zip
Kate: xiaomi.eu_multi_HMNote3SE_*version*.zip
Click to expand...
Click to collapse
I have a request if it's not a problem for you, can you link me the link for the rom (kenzo)
Acoca said:
I have a request if it's not a problem for you, can you link me the link for the rom (kenzo)
Click to expand...
Click to collapse
That xiaomi.eu on my earlier post is a link. Just click that then the latest thread(7.5.25) then downloads > androidfilehost > search the name for kenzo(which I posted above).
Flash the ZCX recovery and flash MIUI.. Easiest way if you want orignal miui and not eu version.
jthreja said:
Flash the ZCX recovery and flash MIUI.. Easiest way if you want orignal miui and not eu version.
Click to expand...
Click to collapse
And what's the advantage of using the original vs. the eu version?
jthreja said:
Flash the ZCX recovery and flash MIUI.. Easiest way if you want orignal miui and not eu version.
Click to expand...
Click to collapse
I don't know why but i had zcx and that too with the configuration which can install a miui rom over custom ones. However when i did that i faced a bootloop issue. And later i had to flash it again with pc. So i guess that way doesn't work for everybody. And yes, i also tried lazy swipe but same issue.
Sent from my Pixel XL using Tapatalk
Xiaomi.eu is same as miui with removed all mi apps and Chinese blotwares from it. Its a clean miui project...
Have you tried with the latest zcx?
Or flash rom from xiaomi.eu.
So wait, I can flash xiaomi.eu rom via twrp?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is this correct? I went to xiaomi.eu and entered the latest thread MIUI 8 7.5.25 , went to stable builds and chose this rom. Now I just flash it via twrp? If yes, do I wipe everything and do a clean flash, or what?
Yes do a clean flash and you can flash that via twrp..
There should not be any problems..
If u want to roll back with original Miui rom and if u want phone like company frsh..
follow following the steps
1.download the official Fastboot RoM from official website of MiUI and Mi Flash and Extract it.
2.switch off your phone
3.Now switch to Fastboot mode
4.now switch to emergency Download mOde.
5.now open mi Flash
6.select the Extracted Rom
7.press on Refresh button
8.your mobile should show in Mi Flash as C10
9. Select Clean All
10.Click on Flash...
After success you can reboot ur phone
I don't take any responsibility if u miss any step in above do it at ur own risk...
Version 10.2.26.0
Version 10.2.24.0 ------------ > Stock/Root
Version 10.2.9.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T4Ump said:
Version 10.2.24.0 - Link
Click to expand...
Click to collapse
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
vtec303 said:
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
Click to expand...
Click to collapse
Fastboot flash boot.img
It's only magisk for 10.2.24
You can create your own if you want, it's just 30s faster
Code:
fastboot flash boot boot.img
Thank you so much for posting this. I'd been trying for 2 days with twrp and magisk (19.1 and 19.2) and could never get past the recovery bootloop on my Mi 9.
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Does anyone have boot.img V10.2.9.0.PFAMIXM? I wanna try root, but only need that file
xxx
T4Ump said:
xxx
Click to expand...
Click to collapse
Hi, thanks for the patched one. Do you still have the stock one? My phone stuck at recovery mode
Edited: nvm. I'll download the fastboot ROM. Thank you anyway.
realm9thfeb said:
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Click to expand...
Click to collapse
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
PriPhaze said:
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
Click to expand...
Click to collapse
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
PriPhaze said:
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
Click to expand...
Click to collapse
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
T4Ump said:
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
Click to expand...
Click to collapse
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Click to expand...
Click to collapse
Because once I moved back to revolution OS ( I sawp of ROMs quite often ) I realized that my entire apps restored with titanium were crashing , and the few that actually open correctly didn't hold my data.
They were as if you just download them for the first time from the store.
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
Click to expand...
Click to collapse
No, i dont have this problem.
Root images updated to 19.2 magisk.
10.9.20 require wipe all data after flash patched image, this is not practical at all.
1. you stuck in this rom unless you want to wipe all data every time there is new rom.
2. Magisk bug existed in the latest global stable rom, notification prompted everytime you open Magisk to install zip, you can only ignore it or installation zip brick the phone.
10.2.26.0 root/stock
Can I use those with locked bootloader ?
Sent from my MI 9 using Tapatalk
How to Install TWRP:
Note: that version is UNOFFICIAL TWRP-3.3.0-0524
.Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here https://devsjournal.com/usb-drivers-...d-devices.html
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here https://devsjournal.com/download-min...boot-tool.html
Pre-Requisite 3
Your device needs this with unlocked bootloader
if it is not unlocked do the tutorial to unlock HERE
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
------------------------------------------------
1) Download TWRP: recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
2) After getting the TWRP file put it in the same ADB folder
3) Now start the phone in bootlader by doing this:
Connect the phone to the PC
Start the Minimal ADB & Fastboot program from the PC
On the PC screen, type:
adb reboot bootloader
(A request may appear on the phone screen with permission of USB debugging, accept it)
The phone will now restart in Bootloader mode.
4) Now that you are in bootloader mode, from the PC, from the screen
Minimal ADB and Fastboot type:
fastboot flash recovery recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
Sending 'recovery' (98304 KB) OKAY [ 5.970s]
Writing 'recovery' OKAY [ 0.539s]
Done !
---------
.How to Install Root Magisk:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Done !
Credits:
Maker: wzsx150
Developer Team: LR.Team
Is there any issues related to this recovery?
firemax13 said:
Is there any issues related to this recovery?
Click to expand...
Click to collapse
I had no problem with this recovery
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
luigi0824 said:
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
Click to expand...
Click to collapse
I've read somewhere that you need to flash vbmeta.img if verified boot is enabled, however I couldn't find the correct img to flash anywhere. Maybe if we ask someone that has the phone already rooted.
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
BlueIce84 said:
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
Click to expand...
Click to collapse
What method would you follow to install the stock rom, like you, it comes with the bootloader unlocked by the seller and I don't know how to flash stock rom
Use this guide:
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945
carlshark said:
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
Click to expand...
Click to collapse
I gave up on clublenovo. They require SMS authentication to post so even when you log in you can't post and download. TWRP 3.3.1 is also available from 4PDA. That's what I used.
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
luigi0824 said:
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
Click to expand...
Click to collapse
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
thorvall said:
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
Click to expand...
Click to collapse
Will I lose any data if I decrypt my phone? And where do I find that pin code?
luigi0824 said:
Will I lose any data if I decrypt my phone? And where do I find that pin code?
Click to expand...
Click to collapse
Its the pin code you use to open the phone.
And enabling does not remove data, but it does give twrp read/write permission
Is it possible to implement support for OTA updates through TWRP?
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
butterx2341 said:
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
Click to expand...
Click to collapse
If you boot your ZUI system, your twrp will be overwritten by a stock recovery.
However if you flash magisk, your twrp won't be overwritten anymore. If you want to preserve your twrp after rebooting on ZUI, you need to flash magisk.
whatever I do.. the twrp wont be installed (let alone the root/magisk). ADB does say the twrp is flashed... but it will always boot to or the bootloader.. or the system (not the lenovo recovery or twrp recovery). Quiet frustrating... what can I do? Want this boy rooted!
Edit: done. The twrp linked in the tutorial is not correct use this one: https://drive.google.com/file/d/13mt0RLmT83BHSUBpH-J7EhaeZQ-MPYUu/view
That worked!
I want to unlock my bootloader but the site where you request the image file for unlocking it wont accept my IMEI1.. any idea guys?
I am not responsible for your actions, but I will try to help.
I'm going to assume you have unlocked bootloader and ADB/Fastboot tools installed.
1. Download latest Magisk and make 2 copies of it. Install one of them on your phone. Change the extension of 2nd from .apk to .zip, then move it to your phone`s storage
2. Download Pitch Black recovery for Redmi 9C
3. Move recovery.img to both your ADB folder (can be found at C:\adb) and phone`s storage
5. Download DM-VERITY, FORCED ENCRYPTION
6. Rename it to enfec.zip and place in phone`s storage
4. Download attached vbmeta.img and place it in your ADB folder
5. Go into fastboot mode
5. On your PC, open cmd-here.exe in adb folder
6. fastboot flash recovery recovery.img
7. fastboot flash vbmeta vbmeta.img
8. fastboot reboot recovery
9. Sometimes recoveries don't work with touchscreen. In this case, flash other region's ROM. To do this, find and download fastboot version of ROM. Unzip it, run flash_all.bat while being in a fastboot mode (this will erase all data). WARNING: DO NOT RUN flash_all_and_lock.bat. THIS WILL LOCK THE BOOTLOADER AND YOU WILL HAVE TO WAIT ANOTHER WEEK!
Next retry again the whole tutorial. You can also use USB-OTG mouse.
10. Navigate to 'Install' section. Check every option except 'Reboot after installation is complete', 'Zip signature verification' and 'Advanced remove of Forced Encryption'. Select recovery image that you previously moved to your storage and install it 'as Recovery'.
11. In recovery, move to 'backup' and make a backup to your SD card (optional, but highly recommended). Usually, it doesn`t work out of the box. Try searching for guides.
12. In the same section install enfec.zip and then Magisk.zip. If you get errors like 'Failed to mount /nv_data', ignore them.
13. Reboot to system, copy external_sd/PBRB/tools -> storage/0/emulated/PBRB/
Done!
How to pass SafetyNet (tested on 05.05.21 dd/mm):
Simply enable MagiskHide. This will only work if you haven`t modified the /system with modules that don`t hide themselves.
If you did heavy modifications, install UniversalSafetyNetFix (USNF) (repo) or install both MagiskHide Props Config (can be found in Magisk`s modules) and USNF. Instructions to installation of Props Config can be found in the README or on the web. Experiment with it, this is device specific.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems like you are using redmi 9C NFC
I am using redmi 9C Global
Did you tested this recovery on your phone?
I downloaded a recovery from GitHub for redmi 9c flashed it after flashing I flashed vbmeta too but can't boot into recovery
I am currently on global EU ROM 12.0.3 which I flashed yesterday
Before that I was on miui global 12.0.10
I tried to root it with magisk and after flashing magisk patched boot.img flashed vbmeta too
But can't get root access
Before I was on miui global 12.0.8
I rooted with magisk and got root access
In order to get root access I downgraded back to miui 12.0.8 but can't get root access
What should I do now?
It seems like you are using redmi 9C NFC
Click to expand...
Click to collapse
True
I am using redmi 9C Global
Click to expand...
Click to collapse
That doesn`t really matter
Did you tested this recovery on your phone?
Click to expand...
Click to collapse
Yes
I downloaded a recovery from GitHub for redmi 9c
Click to expand...
Click to collapse
Which recovery have you flashed? I provided link to SouceForge, not GitHub
I downloaded a recovery [...] flashed it after flashing I flashed vbmeta too but can't boot into recovery
Click to expand...
Click to collapse
Try fastboot reboot recovery.img
If that doesn`t work, try updating your ADB/Fastboot tools. Just download needed files from any site and place them in your ADB folder.
Also, since this recovery is unofficial port, it is a bit different from original. To boot into recovery, you don`t have to hold power+volume_up untill you see recovery menu. Instead, hold it untill screen goes black.
I tried to root it with magisk and after flashing magisk patched boot.img flashed vbmeta too
But can't get root access
Click to expand...
Click to collapse
From my guide:
No users report bootloops, but in some cases root isn't granted. In this case follow next steps.
Click to expand...
Click to collapse
Before I was on miui global 12.0.8
I rooted with magisk and got root access
In order to get root access I downgraded back to miui 12.0.8 but can't get root access
Click to expand...
Click to collapse
I don`t really get what you say, but there is no need to downgrade/upgrade. If I were you, I would flash latest MIUI, though
What should I do now?
Click to expand...
Click to collapse
Try flashing latest eu MIUI (I can help with that, if you want) and then follow method B) step by step, without making any changes and reading everything that I wrote
Hope this helps!
Can't make a backup as your tutorial because i got an error, and what i need to backup just the 'one' selected from the recobery ? can i skip this step and just install the enfec.zip and then Magisk.zip ?
I am stuck from the step 8 and 9 because i got that error and i have no idea what select from the list of the backup...
Backup is an optional step. I get an error too and I have no idea why.
Seems like it worked very well. but the safetynet failed, should download Magisk v21.4 zip because the newest one failed at the moment to flash it, and if you get an error at the end of flashing the DM-VERITY, FORCED ENCRYPTION it's ok still working anyway. thanks for sharing the post
@0purple
Btw personally skip the step 8 and 9, if you failed to get into recovery with the bottons just try again the step 5,6,7
Knox6 said:
but the safetynet failed, should download Magisk v21.4 zip because the newest one failed at the moment to flash it,
Click to expand...
Click to collapse
Updated the post, try it
I have the European version 12.06 of the redmi 9c. I tried to boot into recovery, but the touch doesn't work in any way, so I can't do anything... help me
i just enabled magisk hide option in magisk manager setting it fixed it
MHaseebpk said:
View attachment 5278627View attachment 5278627i just enabled magisk hide option in magisk manager setting it fixed it
Click to expand...
Click to collapse
does the root work for you? I have the EUropera version 12.0.6 and it doesn't work
sephirot91 said:
does the root work for you? I have the EUropera version 12.0.6 and it doesn't work
Click to expand...
Click to collapse
Yes
MHaseebpk said:
Yes
Click to expand...
Click to collapse
See this
MHaseebpk said:
See this View attachment 5278773
Click to expand...
Click to collapse
how did you do it? I followed the guide perfectly and it doesn't work. On the other hand, with the second method, the pitch recovery touch does not respond to commands
sephirot91 said:
how did you do it? I followed the guide perfectly and it doesn't work. On the other hand, with the second method, the pitch recovery touch does not respond to commands
Click to expand...
Click to collapse
I just followed seconds method and I am on global rom
You should flash global rom and should try again
MHaseebpk said:
I just followed seconds method and I am on global rom
You should flash global rom and should try again
Click to expand...
Click to collapse
Ok thanks, I could try. Do you have a guide to flash the global version? thank you very much
https://c.mi.com/oc/miuidownload/detail?guide=2
is it okay? for flashing rom global
sephirot91 said:
Ok thanks, I could try. Do you have a guide to flash the global version? thank you very much
Click to expand...
Click to collapse
First you need to download angelica global latest (12.0.10) fastboot rom from Here
Download miflash pro english from Here
Extract mi flash pro zip file install mi flash pro and extract angelica global image too in your PC
Now power off you phone
Hold volume down and power button simultaneously for 5 seconds
Your phone will boot into fastboot mode
Now open miflash pro login with your mi account connect your phone
When you will connect your phone your phone will be automatically detected
And miflash pro will recommend you to flash in recovery click on it
Next select package (fastboot rom) which you downloaded and extracted before and select script flash all.bat
Wait for 5 to 6 minutes
Your phone will be flashed
After that setup your phone
Boot again into fastboot mode
Setup adb in your PC
Install mediatek USB vcom drivers
And next follow second method
MHaseebpk said:
First you need to download angelica global latest (12.0.10) fastboot rom from Here
Download miflash pro english from Here
Extract mi flash pro zip file install mi flash pro and extract angelica global image too in your PC
Now power off you phone
Hold volume down and power button simultaneously for 5 seconds
Your phone will boot into fastboot mode
Now open miflash pro login with your mi account connect your phone
When you will connect your phone your phone will be automatically detected
And miflash pro will recommend you to flash in recovery click on it
Next select package (fastboot rom) which you downloaded and extracted before and select script flash all.bat
Wait for 5 to 6 minutes
Your phone will be flashed
After that setup your phone
Boot again into fastboot mode
Setup adb in your PC
Install mediatek USB vcom drivers
And next follow second method
Click to expand...
Click to collapse
I don't lose the unlocked bootloader, right?
sephirot91 said:
I don't lose the unlocked bootloader, right?
Click to expand...
Click to collapse
Yes select flash all.bat your bootloader will remain unlock and your phone will be flashed
Don't select flash all and lock script otherwise bootloader of your phone will be locked and you will have to wait for 7 days to unlock bootloader