Code:
To XDA moderators : There's no sub-forum for these 4 models.
Nokia C2 Tava, Tennen and 2 V Tella are basically same device. Please move this topic when available, thanks.
Hi all,
Recently I got Nokia C2 Tennen and C5 Endi bootloader unlocked again.
If you guess I achieved that by utilizing prototype firmware, then you're right.
However I don't have other retail device to test, anybody would like to give it a try?
I would be definitely interested to try it out. I have a c5 needing bootloader unlock
Legendanubis said:
I would be definitely interested to try it out. I have a c5 needing bootloader unlock
Click to expand...
Click to collapse
Alright.
May I know if you're familiar with operating SP flash tool?
i wouldl love to try it. I have got a locked c2 tava that i am unable to factory reset. A friend brought the phone to me to FRP bypass (bought it cheap from someone that said it just needed to be charged, gave a false pin and here we are) That was a month ago. Im very new to all of this and while ive been studying bootloaders and root i havnt actually had the pleasure. Any advice is welcome on this TA-1218. I cannot find ANYTHING on the EXACT model. All help is appreciated. Thanks
jh
hikari_calyx said:
Alright.
May I know if you're familiar with operating SP flash tool?
Click to expand...
Click to collapse
I am not familiar with it, I currently use bugjaeger to flash my phone's. But would love to get this c5's bootloader unlocked so if I can't use my program to flash I would definitely learn the sp flash tool
Bootloader unlock done with Hydra Tools. Also put a work root and magisk root on as well.
Hydra MediaTeK Tool Ver 1.0.3 Build 77
Windows 10 (Version 10.0, Build 19042, 64-bit Edition)
Intel(R)Core(TM) i5-2410M CPU @ 2.30GHz
Intel(R) HD Graphics 3000
Ram Installed : 4 GB
Windows Access Right : Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.20
Serial : [removed]
Initialize : OKAY
Status : Activated
Life : [removed]
=====================================
Searching for MTK Device... Found
Port Identification : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM10)
Device : 6&13d9c38d&0&3
SymbolicName :\\??\\USB#VID_0E8D&PID_0003#6&13d9c38d&0&3#\[removed]
Driver Ver : 01/22/2015,3.0.1504.0
Opened handle..
Handshaking... Ok
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0717 MT6761 [6761]
hw subcode : 8A00
hw version : CA01
sw version : 0200
Target config : E3
SBC : 01 (True)
SLA : 02 (True)
DAA : 00 (False)
SWJTAG : 02 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Exploiting Device...
Exploit Sent..
Successfully Exploited...
Handshaking... Ok
\\HydraTool_FullPackage_08-01-2021\backup\\Preloader_dump\\prel.tmp
Handshaking...
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0717 MT6761 [6761]
hw subcode : 8A00
hw version : CA01
sw version : 0200
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
MEID : [removed]
Stage 1.. [Size:232216]
Sending : Please wait.. Accepted
Identifying Protocol...
Protocol : New
Synchronization... [ERROR]- NOT SYNC
=============================================
Reasons why it fails due to the following"
1. Harware problem/issues
2. If you did Testpoint Kindly check the parts you Touch/TP
3. Powershortage, try to connect Battery
4. Check or replace usb cable and plug directly to your pc usb port.
=============================================
SYNC
Preloader Initialization...
Parsing prel.tmp
Init : Accepted
Executing : SYNC
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : [removed]
ERAM Size : 0x0000000000039000 -228 KB
IRAM Size : 0x0000000080000000 -2 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000747C00000 -29.121 GB
eMMC CID : [removed] - QD63MB
Executing : ACCEPTED...
Reading GPT0 -EMMC [0x00008000] 0 130 Items
0
Autobackup Partitions
-preloader [0x00000000] 512 KB -> preloader.bin...1 Ok0
-> Renaming Preloader.... preloader_armstrong.bin0
Creating Scatter file... \\HydraTool_FullPackage_08-01-2021\\\backup\\Auto\\0717__111921012459\\MT6761_Android_scatter.txt
-pgpt [0x00000000] 8 MB -> pgpt.bin...1 Ok
-frp [0x02D80000] 1024 KB -> frp.bin...1 Ok
-nvdata [0x04E80000] 64 MB -> nvdata.bin...1 Ok
-protect1 [0x0C51A000] 8 MB -> protect1.bin...1 Ok
-protect2 [0x0CD1A000] 10.898 MB -> protect2.bin...1 Ok
-persist [0x0E000000] 48 MB -> persist.bin...1 Ok
-nvram [0x1A900000] 64 MB -> nvram.bin...1 Ok
Done!!!0
\\HydraTool_FullPackage_08-01-2021\\\backup\\Auto\\0717__111921012459
MTK Phone Loader is NOW RUNNING.
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 2 [removed]
ERAM Size : 2 0x0000000000039000 -228 KB
IRAM Size : 2 0x0000000080000000 -2 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000747C00000 -29.121 GB
eMMC CID : [removed] - QD63MB
Reading GPT0 -EMMC [0x00008000] 0 130 Items
-------------------------------------
Operation : Unlock Bootloader
Processing...
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Verifying status after operation...
-------------------------------
Bootloader Status...
Bootloader : Unlocked
-------------------------------
Action Result : 0 Ok
Elapsed Time : 00:01:04
(its been a while. i know)
i successfully got my c2 tennen (ta-1218) bootloader unlocked and rooted.
im still running on stock tho.
plus no custom recoveries yet.
Quartzbreaker said:
i wouldl love to try it. I have got a locked c2 tava that i am unable to factory reset. A friend brought the phone to me to FRP bypass (bought it cheap from someone that said it just needed to be charged, gave a false pin and here we are) That was a month ago. Im very new to all of this and while ive been studying bootloaders and root i havnt actually had the pleasure. Any advice is welcome on this TA-1218. I cannot find ANYTHING on the EXACT model. All help is appreciated. Thanks
Click to expand...
Click to collapse
Have you ever found a solution to your problem? Im having same issue and cant seem to find a fix for it.
This may mot be the correct thread and if so please accept my apology but I'm trying to unlock the bootloader for a Moto g pure and neither Motorola or at&t will give the bootloader codes. I saw reference here to sp flash tool and wondered if someone could help me utilizing that. I do not have a desktop or laptop and all I have to work with is mobile. Mtkclient won't run because I can't get PySides6 dependencies to install in Termux. I was able to install NetHunter , the one for no rooted devices, but so far I can't find a way to force flash
hikari_calyx said:
Code:
To XDA moderators : There's no sub-forum for these 4 models.
Nokia C2 Tava, Tennen and 2 V Tella are basically same device. Please move this topic when available, thanks.
Hi all,
Recently I got Nokia C2 Tennen and C5 Endi bootloader unlocked again.
If you guess I achieved that by utilizing prototype firmware, then you're right.
However I don't have other retail device to test, anybody would like to give it a try?
Click to expand...
Click to collapse
SUCCESS! [BOOTLOADER UNLOCK] Nokia C2 Tava TA-1218.
[BOOTLOADER UNLOCK] Nokia C2 Tava TA-1218. I was actually approached by a person from XDA named @Soadeathdealer who gave me remote access to unlock his phone's bootloader. This phone bootloader was successfully unlocked using Unlock Tool which...
forum.xda-developers.com
cagedbadger said:
This may mot be the correct thread and if so please accept my apology but I'm trying to unlock the bootloader for a Moto g pure and neither Motorola or at&t will give the bootloader codes. I saw reference here to sp flash tool and wondered if someone could help me utilizing that. I do not have a desktop or laptop and all I have to work with is mobile. Mtkclient won't run because I can't get PySides6 dependencies to install in Termux. I was able to install NetHunter , the one for no rooted devices, but so far I can't find a way to force flash
Click to expand...
Click to collapse
I don't think the moto g pure has been unlocked yet. At least boost variant.
Related
Let's start over... shall we?
First, thanks to Bin4ry and NielDK for initial fix. This is the sequel if their work in another thread.
The fix will be considered complete when it'll be able to revive all phones: non-booting and radio-bricked, and enables fastboot on simlocked phones!
===
I think that SIM-lock is not signed anymore after bootloader unlock. If it was, then phone wouldn't boot even after flashing simlock.ta, because SE phones with bad/unsigned/damaged SIM-lock don't boot.
simlock.ta converted to ASCII:
Code:
���������������������
���
������������������������
����������������������4OP_ID="108";OP_NAME="Customized";CDA_NR="1241-4091";��� �00101-*���������������
������������������������
������������������������
������������������������
���������������������������������������������������������
Operator: 001-01-* meaning it's simlocked.
SIM-locked 7DA unit:
Code:
d—FÀB„›ü‡ÞydØ¥¾‡q�
���
–ƒµâMMCß!2P€®> Ö÷êBY(wêÿÕÄ«�l³V)v*‡f¨Ê˜¶ü¶½l©���
ÛðÔŠ�v–-|›SöíS«Ë±ë‘ ׌€Ò/pÀ»®uKؘ*[Eá c}ëÈø%£8�DOP_ID="162";OP_NAME="Rogers";CDA_NR="1247-6276";ROOTING_ALLOWED="0";�CSERVERID="bmcsecs01";AUTHCERT="UNKNOWN";TIMESTAMP="110412 01:30:10" �00101-*������302720-*�����������
—êFk#Üä¯y'?¶…ª˜ (êÚ÷’(xø¶âƒM¥Â*ßÙõ�WÝÈØ*„���
‘2=Ôs#8÷kÚŸœ"í IÙèhO®{à’¥ª|B΃iÃǹֶ
E„B[=—b���
t¼²föb±8§®@IjÚœ�\ ŽDR¦Sp"<¢ç¯‚¶í̽Ú)ïhâ+xÕ_‰���
`’ÇkùÁ|v�yìòYç_6Q qL¶`* Ý0©ª-©`\wŒPL(@™,ήjæþþ”*�6636209799586744������������������������ È‚V"s7Ïæw93æ=àFz¿~9Í¡®gÙÄ.??
Note the ROOTING_ALLOWED=0.
BL unlocked and working:
Code:
wñMpjEZ÷îlBÀ3øÛ^�
���
�¤*‘ƒ¡<i_{<Ž(B-Kÿà (?Dð/;©c$™ùÀ
˯¤uœ º;`”’`o²¨éG���
¤m ¶.úÑ
!°_Zª|ã_ »go£°TçðgDivT0½KH�RÍíý‡³e‚˜ãÿ�‘OP_ID="435";OP_NAME="Customized";CDA_NR="1247-6199";ROOTING_ALLOWED="1";;RCK_H="654E9886B5ECE33DDB814F5C7DC2D502FC07FBD1A872A013748964FC5D8281ED"CSERVERID="bmcsecs01";AUTHCERT="UNKNOWN";TIMESTAMP="110325 08:24:03"���
ÒÞ,€†ÌÓtda”qæmºØTrà ¦ôää¥ÌÆ-çý¤àŸ{¦l)N5ÑFÓ°{R“ùSÓ���
“m
F‡¡²ŽD¹$ìw‚v³µÑ´æ @ãKˆx¾®7à¡¥‚ûknóÚPÎ?í˜ø/“É`N8���
ºDJ6¿´”…¬yVfWÕ³d ‡*Ñ@ãõÝÊØ^ãPGsŸÜ½€nD_ŽF°€Ù¯|���
×|`ˆß9‰à¼ãö*e|°eM½ ”0cœêÕúlªÛž«3Z¼3€ùy*™rôsþðÑE+����������������˜Ä.9ÿY±º'ƒJÙ?" ƒä??
simlock.ta doesn't say is rooting allowed or not, so BL won't allow it.
Click to expand...
Click to collapse
TA Misc, 8FD from bricked, fastboot off, no network:
ta = 000008FD 00 00 00 00 05 00 00 00 03 00 00 00 08 00 00 00
TA Misc, 8FD from BL unlocked and BL locked device fully working:
ta = 000008FD 00 00 00 00 05 00 00 00 03 00 00 00 08 00 00 00
TA Misc, 8FD from non-booting phone:
ta = 000008FD 00
TA Misc, 8FD on SIM-locked phone:
ta = 000008FD 00
TA Misc, FreeXperia Team's fix:
000008FD 00 00
That's strange, on factory-fastboot-capable phones 8FD is same though one has got fastboot, and other not, and bricked fb capable and SIM-locked has got the same 8FD.
Looks like there is something in 8FD, but fastboot capability is somewhere else in TA Misc (partition 02).
FYI, TA Misc is where we should look for. 7DA is simlock unit and it might be worth investigating.
Click to expand...
Click to collapse
nice m8,, I would like to help but my phone's bootloader is unlocked and fully working.
I can only wish you luck
You got PM.
And thanks everyone for so good response!!!
Check the first post for update.
Do you now have everything you need?
Or is it a play locked to an original vendor you still need?
Thanks for looking in to this btw... if you need any help just shout
Best of luck!
Code:
Action journal
13:21:22 Identifier
13:21:22 Affiche des informations détaillées sur le téléphone connecté.
13:21:22 Systeme d'exploitation: Microsoft Windows 7 Ultimate Edition (build 7600), 64-bit
13:21:22 Version de l'application: 0.19.3593 (beta)
13:21:22 . Le nom de l'action est 'Identification'
13:21:22 Selectionnez le modele du telephone: Xperia™ PLAY
13:21:22 Selectionnez la methode de connexion: USB EROM
13:21:22 i Instructions
13:21:22 i 1. Assurez vous que le telephone est chargee au moins jusqu'a 50%.
13:21:22 i 2. Eteindre le telephone!
13:21:22 i 3. Enlever la batterie du telephone et attendre au moins 5 secondes avant de la remettre!
13:21:22 i 4. Appuyez et maintenez retourner au bouton precedent, puis connectez le cable au telephone!
13:21:22 . Action commence, en attente de l'utilisateur
13:22:20 . Action termine, en attente de l'utilisateur
13:22:20 Se connecte via SEMC USB Flash Peripherique (USB9)...
13:22:20 Version des pilotes peripheriques
13:22:20 Chipset detecte: MSM7X30
13:22:20 Boot mode: EROM
13:22:20 EROM version: 1241-3656 R9A021
13:22:20 IMEI:
13:22:20 ID de périphérique: 096EEC99EAD9606F592934A175B40131F690E47D
13:22:20 Chargement minimum AID: 0001
13:22:20 Couleur: Rouge SEMC
13:22:20 Envoi du chargement en cours...
13:22:20 Reponse du chargement en attente
13:22:22 Modele du Telephone (depuis TA): R800i
13:22:22 Courant CXC (depuis TA): 1245-8821_3.0.A.2.184
13:22:22 Courant CDA (depuis TA): 1247-6199_R6C
13:22:22 Courant FS (depuis TA): WORLD-1-8_3.0.A.2.184
13:22:22 Le telephone n'est pas verouille sur un reseau.
13:22:22 s Effectue avec succes.
13:22:22 . L'action est en phase d'arret
13:22:22 . L'action a ete realise avec succes
hi my phone is repair with tft tool and fatgsm for sim and fastboot disabled
ty
Check your PM
Sent from my R800i using XDA Premium App
I'll remind everybody that has this issue, that i have created a bounty for this problem.
If blagus fixes this, please donate some money, so he can buy a beer or two.
After all, he's doing us all a huge favour, if he fix it.
Good luck
waz000000 said:
whilst i don't want to take anything away from blagus for when he manages to help sort this don't forget everyone else along the way that made getting this far possible! and some even sacrificing their own to help!
Click to expand...
Click to collapse
Oh, sorry waz.
Ofcourse, I know u also have contributed alot asswell. (NielDK and Bin4ry also)
Thanks to you guys, all the bricked play's are working.
And i know u fuxxord your phone trying to help, so it's noted and remembered.
ill be writing back my TA backup tonight when i get home from work and will see if it locks my bootloader again
Right i flashed back my "locked" TA and can confirm it did "not" lock the bootloader again.
Wasnt going to unlock this one either :'(
So there is no progress?
waz000000 said:
Right i flashed back my "locked" TA and can confirm it did "not" lock the bootloader again.
Wasnt going to unlock this one either :'(
Click to expand...
Click to collapse
It WILL relock bootloader, but you need license!
Sent from my X8 using XDA App
Blagus said:
It WILL relock bootloader, but you need license!
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I would count myself as pretty stupid if i didn't realise that but just for you to prove it WONT! re lock it
Code:
Action journal
21:28:54 Restore TA
21:28:54 Allows to restore the TA (Trim Area) content.
21:28:54 Operating system: Microsoft Windows XP Media Center Edition Service Pack 3 (build 2600)
21:28:54 Application version: 0.20.3622 (beta)
21:28:54 . The action name is 'Restore TA'
21:28:54 Selected phone type: Xperia™ PLAY
21:28:54 Selected connection method: USB EROM
21:28:54 i Instructions
21:28:54 i 1. Make sure the phone battery is charged to at least 50%.
21:28:54 i 2. Switch off the phone!
21:28:54 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
21:28:54 i 4. Press and hold the return back button, then connect the cable to the phone!
21:28:54 . The action started waiting for the user
21:29:02 . The action finished waiting for the user
21:29:02 Connecting via SEMC USB Flash Device (USB3)...
21:29:02 Device driver version: 2.2.0.5
21:29:02 Detected chipset: MSM7X30
21:29:02 Boot mode: EROM
21:29:02 EROM version: 1241-3656 R9A021
21:29:02 REMOVED
21:29:02 Device ID: 398DFEADD33273420EBECF2DE48E75548D851A8D
21:29:02 Minimum loader AID: 0001
21:29:02 Color: Red SEMC
21:29:02 i Waiting for connection to the server...
21:29:11 Receiving news...
21:29:13 i No news
21:29:19 Sending loader...
21:29:19 Waiting for loader response...
21:29:21 Loading data from file: Xperia PLAY_locked_20110518163651_TANormal_TAMisc.opd
21:29:21 Writing TA Normal...
21:29:21 Writing TA Misc...
21:29:22 s Successfully done.
21:29:22 . The action entered shutdown phase
21:29:22 . The action reported success
---
and to prove i have a license:
Code:
Action journal
21:31:26 User account details
21:31:26 Checks connection to server and shows the details about your user account.
21:31:26 Operating system: Microsoft Windows XP Media Center Edition Service Pack 3 (build 2600)
21:31:26 Application version: 0.20.3622 (beta)
21:31:26 . The action name is 'Info'
21:31:26 i Waiting for connection to the server...
21:31:32 Receiving news...
21:31:34 i No news
21:31:36 Current time licences
21:31:36 i Omnius Full 1 Day
21:31:36 i One day license for unlocking and flashing
21:31:36 i State: The licence is active
21:31:36 i Valid since 2011-May-21 09:31 until 2011-May-22 11:31
21:31:36 Credit info
21:31:36 i Supreme Credit
21:31:36 i Disponible amount: 0.00
21:31:36 i Locked amount: 0.00
21:31:36 i Used amount: 0.00
21:31:36 s Successfully done.
21:31:36 . The action entered shutdown phase
21:31:36 . The action reported success
Uploaded with ImageShack.us
-post deleted-
Blagus, do you think you'll be able to acquire a Play/Arc/Neo anytime soon? It'd probably speed up development, wouldn't it? Perhaps something could be done about acquiring it... a bit of help from the community's side?
Blagus said:
Hmm, it's strange, because with unlocked bootloader TA Misc area is smaller than with locked.
With SIM-locked phone TA Misc is also full of hashes, and much larger that on SIM-free phone.
And with simlock.ta file, Simlock unit was overwritten (07DA in TA Misc), so I'm not sure if something could be done about it (for free), but let's hope for the best
Click to expand...
Click to collapse
hope so would be good, I did some checking on the locked and unlocked ones myself and there are differnces according to the HEX the only thing i can think of is that omnius tool is able to backup at the moment but doesnt support writing back "properly" just yet.
waz000000 said:
hope so would be good, I did some checking on the locked and unlocked ones myself and there are differnces according to the HEX the only thing i can think of is that omnius tool is able to backup at the moment but doesnt support writing back "properly" just yet.
Click to expand...
Click to collapse
here i have decrypted opd backup in hex very similar to simlock.ta file's format, but i need to chat with Bin4ry about that and some other stuff... still waiting for his reply... it shouldn't be hard to implement this file support in FlashTool since fxtool and this one are almost identical (address:hex style)...
Sent from my X8 using XDA App
Hi everybody,
I bought a 2-din android based dvd/etc player for my car - basically a touch screen radio.
However, I've been having serious issues with the radio resetting itself and restoring the built-in firmware - don't know if it's somewhere written in non-volatile RAM - anyhow, support has been quite marginal from the seller.
I've gotten a screen dump from CPU-Z but doubt whether it's enough info, I don't know... and seems I'm not able to post a link yet?
Can anybody perhaps help with pointers, etc? I have no idea where to start looking for alternate firmware, etc. etc. etc.
Thank you for all the help!
Tinus
Info
Hey all,
Herewith a bit of info I could gather:
BuildInfos
Android version : 2.3.4
Release Codename : REL
API LEVEL : 10
CPU ABI : armeabi-v7a
Manufacturer : unknown
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : freescale
Radio : unknown
Board : CA01
Brand : CA01
Device : CA01
Display : CA01-N042-TY01-A2-r1.7.99f
Fingerprint : CA01/CA01/CA01:2.3.4/R10.3.2_3/1.7.99f:eng/test-keys
Host : buildserver02
ID : R10.3.2_3
Model : CA01
Product : CA01
Tags : test-keys
Type : eng
User : unknown
Please help!
Tinus
tinusblaauw said:
Hi everybody,
I bought a 2-din android based dvd/etc player for my car - basically a touch screen radio.
However, I've been having serious issues with the radio resetting itself and restoring the built-in firmware - don't know if it's somewhere written in non-volatile RAM - anyhow, support has been quite marginal from the seller.
I've gotten a screen dump from CPU-Z but doubt whether it's enough info, I don't know... and seems I'm not able to post a link yet?
Can anybody perhaps help with pointers, etc? I have no idea where to start looking for alternate firmware, etc. etc. etc.
Thank you for all the help!
Tinus
Click to expand...
Click to collapse
tinusblaauw said:
Hey all,
Herewith a bit of info I could gather:
BuildInfos
Android version : 2.3.4
Release Codename : REL
API LEVEL : 10
CPU ABI : armeabi-v7a
Manufacturer : unknown
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : freescale
Radio : unknown
Board : CA01
Brand : CA01
Device : CA01
Display : CA01-N042-TY01-A2-r1.7.99f
Fingerprint : CA01/CA01/CA01:2.3.4/R10.3.2_3/1.7.99f:eng/test-keys
Host : buildserver02
ID : R10.3.2_3
Model : CA01
Product : CA01
Tags : test-keys
Type : eng
User : unknown
Please help!
Tinus
Click to expand...
Click to collapse
Look, if true, maybe it Navipilot
_ftp://_95.31.4.129/system/
hey guys,
i have an issue while installing Remix OS on my mac on an external hard drive, i have this error:
intel_rapl: driver does not support CPU family 6 model 70
i searched on the web a little and i couldn't find a real answer so wanted to know if a solution did exists ?
thank you
it happens to me too.
lenovo t400
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa)
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
stepping : 10
microcode : 0xa0c
cpu MHz : 800.000
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority
bugs :
bogomips : 5054.21
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
I reboot and remix loads fine.
i restarted but it keeps doing this,
haven't installed it yet because i can't but i have the 64 bits version of the OS on the 3rd partition of my external hdd
how do yen launch Remix?
yours is a MAC, but the CPU is Intel.
it happened again.
diehard2013 said:
how do yen launch Remix?
yours is a MAC, but the CPU is Intel.
Click to expand...
Click to collapse
Macs have been using Intel CPUs for over a decade, which is why Hackintosh is possible.
moriel5 said:
Macs have been using Intel CPUs for over a decade, which is why Hackintosh is possible.
Click to expand...
Click to collapse
and the PowerPC?
reply
I get the same message on my HP Mini with Atom processor, and with a different model number. I ignore the message because it doesn't seem to interfere with the operation of the computer.
diehard2013 said:
and the PowerPC?
Click to expand...
Click to collapse
Were discontinued at least slightly over a decade ago.
I currently have a Summer 2001 iMac G3 that I am trying to resurrect.
I also have this problem but mine is showing
intel_rapl driver does not support cpu family 15 model 2
Please help I want to run it on my pc...
i try to unlock my device e5573cs - 609 , i flashed the new version 21.333.xx by balong tools , my device now just give red light , i try to reflash other version like 21.318.xx but i get error when i use balong tool
and the error is :
0000: ED 05 FA 53 C0 *í.úSÀ
any idea how i can back to old version ? or any update for balong tools ?
any help guys?
Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock