Don't ask me why, but I tried to upload a GSI using fastboot to my N200. And that didn't work. So I then read online about other people getting the same error I had, and their fix was deleting the "product" partition and erasing the system partition
Now my phone is stuck in fastboot and won't boot from an image, take a recovery image, etc. etc. it's kinda completely messed up and it's my fault for trying to tinker with commandline tools.
The problem is there is no MSM recovery for my phone, and even if there was virtualbox can't detect my phone's USB(I've already tried with just the nord MSM, I run linux and I was using a win10 VM)
Is there any hope? Do I have to go to a repair shop?
First post has a section specifically about the drivers you'll need to have your phone recognized in fastboot mode:
The Quest for a Bootloader Unlock (partial guide, T-Mobile variant, may work for MetroPCS/Metro variant)
OK, this process has been hell, but I'm gonna try and consolidate everything I've worked out so far in one place. This all applies only to the T-Mobile variant (ie. it comes preloaded with all the T-Mobile bloatware) of the N200 on the T-Mobile...
forum.xda-developers.com
That said, I'm pretty sure you're stuck until the MSM tool comes out (the MSM tool is different for each phone, DO NOT use one for a different OnePlus phone) to fix it yourself.
edale1 said:
First post has a section specifically about the drivers you'll need to have your phone recognized in fastboot mode:
The Quest for a Bootloader Unlock (partial guide, T-Mobile variant, may work for MetroPCS/Metro variant)
OK, this process has been hell, but I'm gonna try and consolidate everything I've worked out so far in one place. This all applies only to the T-Mobile variant (ie. it comes preloaded with all the T-Mobile bloatware) of the N200 on the T-Mobile...
forum.xda-developers.com
That said, I'm pretty sure you're stuck until the MSM tool comes out (the MSM tool is different for each phone, DO NOT use one for a different OnePlus phone) to fix it yourself.
Click to expand...
Click to collapse
Yeah I run linux, I don't need the drivers
It b what it b
Gip-Gip said:
Yeah I run linux, I don't need the drivers
It b what it b
Click to expand...
Click to collapse
Ah. Sadly, I have next to no experience with Linux outside of the tinkering I've done on my Raspberry Pis, so can't help you there.
Gip-Gip said:
Don't ask me why, but I tried to upload a GSI using fastboot to my N200. And that didn't work. So I then read online about other people getting the same error I had, and their fix was deleting the "product" partition and erasing the system partition
Now my phone is stuck in fastboot and won't boot from an image, take a recovery image, etc. etc. it's kinda completely messed up and it's my fault for trying to tinker with commandline tools.
The problem is there is no MSM recovery for my phone, and even if there was virtualbox can't detect my phone's USB(I've already tried with just the nord MSM, I run linux and I was using a win10 VM)
Is there any hope? Do I have to go to a repair shop?
Click to expand...
Click to collapse
My experience with USB passthrough on different hypervisors is that they all suck. I have to use Windows at work, so I use it for most of the tools including MSM tools.
That being said, I've never seen a real difference in adb / fastboot on Linux or Windows.
Have you tried calling OnePlus by chance?
SMcC2 said:
My experience with USB passthrough on different hypervisors is that they all suck. I have to use Windows at work, so I use it for most of the tools including MSM tools.
That being said, I've never seen a real difference in adb / fastboot on Linux or Windows.
Have you tried calling OnePlus by chance?
Click to expand...
Click to collapse
No, but there is a 100% chance that they'll just tell me to use their repair program. Which I'll be surprised if it's under $100 for me to mail it in, have some dude spend 5 minutes flashing it, and then mail it back
Gip-Gip said:
Don't ask me why, but I tried to upload a GSI using fastboot to my N200. And that didn't work. So I then read online about other people getting the same error I had, and their fix was deleting the "product" partition and erasing the system partition
Now my phone is stuck in fastboot and won't boot from an image, take a recovery image, etc. etc. it's kinda completely messed up and it's my fault for trying to tinker with commandline tools.
The problem is there is no MSM recovery for my phone, and even if there was virtualbox can't detect my phone's USB(I've already tried with just the nord MSM, I run linux and I was using a win10 VM)
Is there any hope? Do I have to go to a repair shop?
Click to expand...
Click to collapse
what exactly is messed up on your phone. i have metro ver rooted and can backup any partition img you need to flash from my stock rooted n200. do you need stock boot or recovery? if not then what do you need?
an is fastboot able to detect your phone?
PopCaps1996 said:
what exactly is messed up on your phone. i have metro ver rooted and can backup any partition img you need to flash from my stock rooted n200. do you need stock boot or recovery? if not then what do you need?
an is fastboot able to detect your phone?
Click to expand...
Click to collapse
i am not replying for the OP but i did the same thing .. fastboot sees the phone yet the bootloader is locked ... so OEM cant be unlocked using fastboot .. if i got this right .. only after oneplus releases the rom on their site this can be fixed .. Please correct me if i am wrong ...
Dimitrimem said:
i am not replying for the OP but i did the same thing .. fastboot sees the phone yet the bootloader is locked ... so OEM cant be unlocked using fastboot .. if i got this right .. only after oneplus releases the rom on their site this can be fixed .. Please correct me if i am wrong ...
Click to expand...
Click to collapse
do you have a unlock code from oneplus for you n200?
PopCaps1996 said:
do you have a unlock code from oneplus for you n200?
Click to expand...
Click to collapse
my phone was paid in full from oneplus store in US .. so i dont think i need a code
Dimitrimem said:
i am not replying for the OP but i did the same thing .. fastboot sees the phone yet the bootloader is locked ... so OEM cant be unlocked using fastboot .. if i got this right .. only after oneplus releases the rom on their site this can be fixed .. Please correct me if i am wrong ...
Click to expand...
Click to collapse
my bootloader is unlocked I just can't enter fastbootd, which is a problem
Hey there, so I managed to get a hold of the MSM tools this morning. Since I have to go out soon, I'll upload them later. Once I upload them, you should be able to unbrick your phone.
lzgmc said:
Hey there, so I managed to get a hold of the MSM tools this morning. Since I have to go out soon, I'll upload them later. Once I upload them, you should be able to unbrick your phone.
Click to expand...
Click to collapse
Excellent! This will be of so much help to many folks out here who have bricked their phones. Look forward to your sharing the tool.
Is the MSMDownload tool, that you got, for the Tmobile version or the unlocked version/retail or both?
jilebi said:
Excellent! This will be of so much help to many folks out here who have bricked their phones. Look forward to your sharing the tool.
Is the MSMDownload tool, that you got, for the Tmobile version or the unlocked version/retail or both?
Click to expand...
Click to collapse
It's for the T-Mobile version. Someone with a retail N200 will have to request a "remote session" with OP support in order to get the MSM tools for the retail version.
lzgmc said:
It's for the T-Mobile version. Someone with a retail N200 will have to request a "remote session" with OP support in order to get the MSM tools for the retail version.
Click to expand...
Click to collapse
@lzgmc, thanks.
How does this "remote session" with OP work? Does one report that the phone is bricked, and then they send you the tool which you execute? Or do they run the tool in real time using a remote desktop tool, but then one has to somehow capture their MSMDownlod tool using some other tool? Do they not try to delete the downloaded tool?
If you could share your detailed experience of this "remote session", and how to capture the MSMDownload tool, it would be of tremendous help. I don't own a retail/unlocked N200, but your experience can perhaps help those who have one, in getting the MSMDownload tool for the retail version. It would benefit the Tmobile users too, in finding a way to potentially convert Tmobile version to retail version. Thanks!
Can you upload the tool please mine is bricked after crash dump
nache2001 said:
Can you upload the tool please mine is bricked after crash dump
Click to expand...
Click to collapse
this might help..... https://forum.xda-developers.com/t/...ot-magisk-patched-boot-imgs-included.4323439/
PopCaps1996 said:
this might help..... https://forum.xda-developers.com/t/...ot-magisk-patched-boot-imgs-included.4323439/
Click to expand...
Click to collapse
Bootloader is locked i can't flash a patched rom, thanks anyway.
nache2001 said:
Bootloader is locked i can't flash a patched rom, thanks anyway.
Click to expand...
Click to collapse
That is a pity. The MSMDownload Tool seems to be the only way to fix this.
The good news is that the MSMDownload Tool is now available with Oneplus support, as of today e.g. until last week, folks out here posted that Oneplus support did not have the tool released to them. Perhaps you can contact Oneplus support and request a "remote session" to unbrick it similar to what @lzgmc did, and get your phone un-bricked sooner? If you do so, try to grab a copy of the MSMDownload Tool that they use in the session and share it with others out here. I am sure @lzgmc will post it soon, but no harm in having multiple copies available.
lzgmc said:
It's for the T-Mobile version.
Click to expand...
Click to collapse
@lzgmc Do you happen to recall which version of Oxygen OS the MSMDownlod tool is for? 11.0.1.4 or 11.0.1.5?
Related
I am currently trying to root my LG Rebel 3 [L158VL] (Android 7.0)
I've been reading all around and I've installed ADB and Fastboot on my system (Windows 10 Pro 64-bit) however I have not been able to enter fastboot on my phone. If anyone could help me out and walk me through this. I've also been looking into using Lineage OS but they don't seem to support my device (not surprising as it's a Tracfone from Wal-Mart) and I was wondering if there was a version I could use on my phone, I'd appreciate if anyone could help me with that. However, I mostly need help with fastboot.
Any help or advice you can provide will be great, thank you in advanced
- Grey
UPDATE: 11/29/2018 8:34PM
I have tried several other methods but my phone absolutely refuses to boot into fastboot or the bootloader. It's like it's locked and I would like to know if there is a way to unlock/allow my device to boot into what I want it to.
Wasting your time
Tracfone has removed the fastboot and download modes. You still have EDL mode. Adb reboot EDL. However youd still have to unlock the bootloader or have some kind of patched system.img in order to avoid a brick. I cant recall the thread but it did mention the possibility of changing the partition table amd flashing a .laf which is your download mode/bootloader/fastboot.
I also read somewhere where it might be possible to flash using python but that may have been in the files that were from the CIAhttps://github.com/troydo42/CIA-Hacking-Tools mobile security exploits. Tracfone is verizon based so if you could manage to flash it somehow then you should be able to load a verizon rom. Please anyone feel free to expand or correct me.
deshaney said:
Tracfone has removed the fastboot and download modes. You still have EDL mode. Adb reboot EDL. However youd still have to unlock the bootloader or have some kind of patched system.img in order to avoid a brick. I cant recall the thread but it did mention the possibility of changing the partition table amd flashing a .laf which is your download mode/bootloader/fastboot.
I also read somewhere where it might be possible to flash using python but that may have been in the files that were from the CIAhttps://github.com/troydo42/CIA-Hacking-Tools mobile security exploits. Tracfone is verizon based so if you could manage to flash it somehow then you should be able to load a verizon rom. Please anyone feel free to expand or correct me.
Click to expand...
Click to collapse
I think I might remember the thread your're talking about. it required that you used a patched version of lg up that unlocks the dev features and let's you flash the partitions in any order you want. I believe lg up requires the phone to be in download mode but I can't say for sure
Is there away to self root the LG rebel 3?
I want to self root it so I don't have to use my work computer to do so
Looking to start a discussion on rooting the unlocked version.
I have tried the root for other variants for this phone and does not work
hi would love to see my k8+ rooted. i have the lmx210ulma version mtk and android 7.1.2.
There are recoveries for this phone and i have a full partition dump i nade today using salt on my ubuntu 18.04 machine. when i say full i mean something like 30-50 .img files pulled.
Any way. The problem on my end is booting into fastboot mode or rebooting to the bootloader. i have tried ADB, recovery and key combinations with out ever getting there. I can however get the phone to download into recovery download mode just fine.
any help would be appreciated
https://forum.xda-developers.com/an...atek-armv8-t3922213/post79626434#post79626434
Duhjoker said:
hi would love to see my k8+ rooted. i have the lmx210ulma version mtk and android 7.1.2.
There are recoveries for this phone and i have a full partition dump i nade today using salt on my ubuntu 18.04 machine. when i say full i mean something like 30-50 .img files pulled.
Any way. The problem on my end is booting into fastboot mode or rebooting to the bootloader. i have tried ADB, recovery and key combinations with out ever getting there. I can however get the phone to download into recovery download mode just fine.
any help would be appreciated
Click to expand...
Click to collapse
We are now in this forum. Why some dork mod moves these too early?
Why here, why not to the K8 forums instead?
The link I posted should work with your device...
Just got told to go to the k8 forums because im really just trying to get the bootloader unlocked. Temp root is nice but my plans involve a recovery and a fully rooted phone. Im trhing to develop a way to compile apps and operating systems completely on the device but i need full access.
Im looking for firmware for LG K8 2018 X210ULMG. Where can i find it ?
go to google and type in "LG K8 + LMX210ULM stock rom" you will get at least five pages or more.
Duhjoker said:
go to google and type in "LG K8 + LMX210ULM stock rom" you will get at least five pages or more.
Click to expand...
Click to collapse
I can't fin anywhere for X210ULMG. Try and when you will find paste here link because anywhere is this rom.
which android version do y0u have 9n your k8. I also need you to go to settings system software info and tell me the software versiion. And just for SandG no seriously, open up a terminal in terminal emulator and type getprop. im looking fir the value of
ro.lge.swversion_arb
to be of further assistance may i ask what exactly you are using it for? ie reflash stock fix brick or other. i can help you with the best plan of action and any other how to.
If you are still out there the ULMG and ULM are the same device. There is no ULMG stock rom. So you will need to flash your K8+ using the ULM firmware. If you are looking to roll back to get to the bootloader the lowest version you can find is a letter F version. None so far have an ARB value so happy flashing.
I myself own this device and its an easily rootable phone with bootloader unlock. Just flash the kdz with the lowest letter value then adb reboot bootloader and then in fastboot mode use fastboot oem unlock and your free to flash any cv1 device twrp recovery.img to the phone.
Just make sure to use either carliv image kitchen or android image studio to check and make sure that system, syatem.img, are both ext4 in recovery.fstab. System.img will probably be labled emmc which will cause failure to mount. Also cache and data as well. Firmware/modem should be labled as vfat. Just as if they were labled if you looked at original fstab.
To root just extract boot.img from kdz and patch using magisk and flash using fastboot flash boot boit.img then fastboot flash recovery recovery.img When booting into twrp first time flash no verity opt encrypt and make backup. Upon exiting make sure all parts are mounted or twrp loop will occur.
Duhjoker said:
If you are still out there the ULMG and ULM are the same device. There is no ULMG stock rom. So you will need to flash your K8+ using the ULM firmware. If you are looking to roll back to get to the bootloader the lowest version you can find is a letter F version. None so far have an ARB value so happy flashing.
I myself own this device and its an easily rootable phone with bootloader unlock. Just flash the kdz with the lowest letter value then adb reboot bootloader and then in fastboot mode use fastboot oem unlock and your free to flash any cv1 device twrp recovery.img to the phone.
Just make sure to use either carliv image kitchen or android image studio to check and make sure that system, syatem.img, are both ext4 in recovery.fstab. System.img will probably be labled emmc which will cause failure to mount. Also cache and data as well. Firmware/modem should be labled as vfat. Just as if they were labled if you looked at original fstab.
To root just extract boot.img from kdz and patch using magisk and flash using fastboot flash boot boit.img then fastboot flash recovery recovery.img When booting into twrp first time flash no verity opt encrypt and make backup. Upon exiting make sure all parts are mounted or twrp loop will occur.
Click to expand...
Click to collapse
I have problem because one month ago I flashed My K8 ULMG with kdz for Aristo 2 . I downloaded the software from Aristo 2 and made Brick through it.
Now it doesn't turn on, gives no sign of life, nothing. When connected to a laptop, the computer can only see Qualcomm HS-USB QDLoader 9008.
Do you know solution for it ?
There are two versions of the k8+ a qualcomm version and an mtk version. Did you read my post after your last reply. I was trying to help you determine that sort 0f thing.
As for a fix.... no as of currently there is no fix for either the qc or mtk versions once bricked. i am working on possible solutions but those are not going to be any time soon.
Your best bet at this point is to look for a used and damaged phone and replace the board in your phone with a different board. Find a k8+ lm-x210ulm or an aristo 2 board. They are cheap around $20 us and can be found with broken screens. They have no arb values so can be flashed and downgraded to get the boot loader unlocked and reflashed and upgraded after with guidance.
Dont feel to bad it happens. I have 4 boards that are trash but im still gonna try to unbrick them. But please what ever you do dont do it with out guidance. pm if you need and ill help.
Duhjoker said:
There are two versions of the k8+ a qualcomm version and an mtk version. Did you read my post after your last reply. I was trying to help you determine that sort 0f thing.
As for a fix.... no as of currently there is no fix for either the qc or mtk versions once bricked. i am working on possible solutions but those are not going to be any time soon.
Your best bet at this point is to look for a used and damaged phone and replace the board in your phone with a different board. Find a k8+ lm-x210ulm or an aristo 2 board. They are cheap around $20 us and can be found with broken screens. They have no arb values so can be flashed and downgraded to get the boot loader unlocked and reflashed and upgraded after with guidance.
Dont feel to bad it happens. I have 4 boards that are trash but im still gonna try to unbrick them. But please what ever you do dont do it with out guidance. pm if you need and ill help.
Click to expand...
Click to collapse
Did you found some method for unbrick this phone without motherboard change ?
I bricked my phone by flashing a patched boot image from 11.0.2 to a phone with 11.0.0 and I can't get to fastboot mode - etc. I think MSM is my only way back?
I got it to fastboot mode, but there's no boot image for 11.0.0 available, right? Please help
Is it T-Mobile version or unlocked?
There's MSM tool for T-Mobile version and you can download full ROM for unlocked
If yours is unlocked and you can access recovery, use sideload
Code:
adb sideload
Press spacebar once and drag and drop the ROM onto command window and press enter
This can fix boot as well as making version update
bouyakasha said:
I bricked my phone by flashing a patched boot image from 11.0.2 to a phone with 11.0.0 and I can't get to fastboot mode - etc. I think MSM is my only way back?
Click to expand...
Click to collapse
there is no msm tool for the full paid version from OP store .. only for T-Mobile .. but if you phone is still under waranty please get a hold of tech support and tell them you request a remote session and that your phone is seen by your computer . they will have you fill up some forms via email and send you the link to download the tools .. if you do please share them here .. when i had my issue they didnt have the tools available and chose not to send my phone back so i am like you with a briked phone
T-Mobile Variant MSM Tools:
[OPN2005G] [OOS TMO DE18CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: I hope you don't break your phone, but if you do, it's not my fault. Since you are choosing to modify your phone, you accept full responsibility for whatever happens to it, including any damage that may have occurred as a result of...
forum.xda-developers.com
Do not use this on any other variant.
I have no idea how to send it, but I have a boot.img from my factory unlocked N200 (Model DE2117) on firmware Oxygen OS 11.0.0.0.DE17AA. I also have a magisk patched copy of that boot.img. Let me know how to send it and you can give it a shot.
I have found fastboot flashing method for 8T to flash unlocked ROM on T-Mobile version (unlocked bootloader required).
Since T-Mobile version MSM is available, I can use it if anything goes wrong
Stay tuned
amboyscout said:
I have no idea how to send it, but I have a boot.img from my factory unlocked N200 (Model DE2117) on firmware Oxygen OS 11.0.0.0.DE17AA. I also have a magisk patched copy of that boot.img. Let me know how to send it and you can give it a shot.
Click to expand...
Click to collapse
wow .. please upload it to google drive or mega (dot) nz and post the link here .... honestly this gets me very excited ...
mingkee said:
I have found fastboot flashing method for 8T to flash unlocked ROM on T-Mobile version (unlocked bootloader required).
Since T-Mobile version MSM is available, I can use it if anything goes wrong
Stay tuned
Click to expand...
Click to collapse
my bootloader is locked .. thats why MSMDownload tool is a must
edale1 said:
T-Mobile Variant MSM Tools:
[OPN2005G] [OOS TMO DE18CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: I hope you don't break your phone, but if you do, it's not my fault. Since you are choosing to modify your phone, you accept full responsibility for whatever happens to it, including any damage that may have occurred as a result of...
forum.xda-developers.com
Do not use this on any other variant.
Click to expand...
Click to collapse
I tried that on my full paid one from oneplus.com and it dont work ... so yes its a waste to download it for nothing
[GUIDE] Convert TMO to EU via MSM Tool, no SIM Unlock or Bootloader Unlock needed!
*** Use this at your very own risk. *** You will lose all data *** Backup your working modem and persist, just in case *** Read the entire post and follow the steps closely before asking for help. Post all error messages and steps you took...
forum.xda-developers.com
There's a maual method.
If you're familiar with fastboot flash with Moto phone, yes, similar commands.
Download full ROM and unpack with payload dumper, and flash every .img one by one
Dimitrimem said:
I tried that on my full paid one from oneplus.com and it dont work ... so yes its a waste to download it for nothing
Click to expand...
Click to collapse
If you use the "+ Quote" button, rather than the reply button, it'll create a multiquote, letting you quote and reply to multiple posts all at once (it'll add a "insert quotes" button to the reply box). This eliminates double-posts, which most forums frown upon.
@Dimitrimem here ya go https://drive.google.com/drive/folders/1DzR0uEdyFeBeID4sVaT96z0Y88sMaomL?usp=sharing
Dimitrimem said:
there is no msm tool for the full paid version from OP store .. only for T-Mobile .. but if you phone is still under waranty please get a hold of tech support and tell them you request a remote session and that your phone is seen by your computer . they will have you fill up some forms via email and send you the link to download the tools .. if you do please share them here .. when i had my issue they didnt have the tools available and chose not to send my phone back so i am like you with a briked phone
Click to expand...
Click to collapse
Tried this today. Now waiting on OnePlus to respond.
bouyakasha said:
Tried this today. Now waiting on OnePlus to respond.
Click to expand...
Click to collapse
Don't wait to long for their reply .. if they don't answer call them on the phone.. it takes less than a minute to have them speak with you ... I dragged it for too long with them waiting 7 days to send me a shipping label than another 5 for another try at it .. another 4 to get the link for download ..after all that they said they don't have it... but this was a while back ... I'd be on that phone fast.. tell them you need your phone as it's the only one ... honestly if you can get the msm tool it would be amazing
mingkee said:
[GUIDE] Convert TMO to EU via MSM Tool, no SIM Unlock or Bootloader Unlock needed!
*** Use this at your very own risk. *** You will lose all data *** Backup your working modem and persist, just in case *** Read the entire post and follow the steps closely before asking for help. Post all error messages and steps you took...
forum.xda-developers.com
There's a manual method.
If you're familiar with fastboot flash with Moto phone, yes, similar commands.
Download full ROM and unpack with payload dumper, and flash every .img one by one
Click to expand...
Click to collapse
I am familiar with this from Moto, and some previous manual flashes with my OEM OP5. However, after extracting the partition .imgs from the OOS OTA via this tool when I try to `fastboot flash logo logo.img` (among others), I get hit with `FAILED remote: flashing is not allowed for critical partitions`, even after having unlocked with `fastboot flashing unlock_critical`. How were you able to get everything to work?
I also tried flashing the OTA zip via the TWRP, but it seems like the current dev version of TWRP in that thread is completely borked for N200 as far as ROM flashing goes ://
darkghost568 said:
I am familiar with this from Moto, and some previous manual flashes with my OEM OP5. However, after extracting the partition .imgs from the OOS OTA via this tool when I try to `fastboot flash logo logo.img` (among others), I get hit with `FAILED remote: flashing is not allowed for critical partitions`, even after having unlocked with `fastboot flashing unlock_critical`. How were you able to get everything to work?
I also tried flashing the OTA zip via the TWRP, but it seems like the current dev version of TWRP in that thread is completely borked for N200 as far as ROM flashing goes ://
Click to expand...
Click to collapse
You have to flash in fastbootd (... reboot fastboot) as instructed in 8T forum
mingkee said:
You have to flash in fastbootd (... reboot fastboot) as instructed in 8T forum
Click to expand...
Click to collapse
Ok so now I'm stuck here as well (saw your comment in the other thread):
mingkee said:
I attempted to flash unlocked ROM on bootloader unlocked T-Mobile version phone
It stuck on products.img. The error stated "not enough space for the partition"
What happened?
Click to expand...
Click to collapse
Any luck getting past this?
darkghost568 said:
Ok so now I'm stuck here as well (saw your comment in the other thread):
Any luck getting past this?
Click to expand...
Click to collapse
[GUIDE] Unbrick or restore to OOS using only fastboot
This guide will only work up to OOS 11. This guide is for users that can't or just don't want to download MsmDownloadTool. Linux users especially, since the tool is not available for linux. All you need is a recent version of android tools with...
forum.xda-developers.com
Towards the bottom of that post it talks about getting past that error.
There's no way to root this a phone with the following, is there?
OP N10 5G / TMO / BE2025.BE88CB / 11.0.2.BE88CB
- Bootloader unlocked.
- Not rooted.
Seems to me there's no MSM tool for the BE88CB (TMO) variant, no TWRP, and no flashed boot images available.
Do I have this right? Rooting is impossible?
How much of a loss do you want to risk? (I think a refurb is ~$250 now for an international).
I'd try the TWRP for the international one, and you can flash Magisk directly from that (rename .apk to .zip); I've never needed the boot images.
If that doesn't work, I think you can MSM the ENTIRE international recovery image over it... even if you lose some of the T-mo bands (m-wave?) it is still pretty quick (mine is a international phone, on Tmo, 5G works great for me).
If the bootloader is unlocked, you should be in good shape.
YMMV, no refunds, at your own risk, etc. I have gotten braver in my old age, though.
I've been through this thread: https://forum.xda-developers.com/t/...bile-metro-w-locked-bootloader.4297501/page-5
But both links to MSM the TMO to GLO are dead, so the MSM is currently not available.
The TWRP for the international... I'll happily try that, do you know where it is? I've tried booting to 3.5.2_10-1 and it boots but the touchscreen doesn't work via `fastboot boot` (not `fastboot flash boot` ) which can be found here: https://forum.xda-developers.com/t/twrp-3-5-2_10-billie-twrp-for-oneplus-nord-n10-5g-beta.4256333/
bouyakasha said:
There's no way to root this a phone with the following, is there?
OP N10 5G / TMO / BE2025.BE88CB / 11.0.2.BE88CB
- Bootloader unlocked.
- Not rooted.
Seems to me there's no MSM tool for the BE88CB (TMO) variant, no TWRP, and no flashed boot images available.
Do I have this right? Rooting is impossible?
Click to expand...
Click to collapse
nah man you can actually unlock the bootloader without tmo carrier unlock and root...see my guide to do that, its as straight forward as any other oneplus, but basically you have to request the bootloader unlock code from oneplus, then assuming your carrier unlocked or use the guide to break the carrier lock functionality. If your already at that point grab the boot image for your version, store on device, root that image with magisk manager then flash it in bootloader
https://github.com/nylar357/nord_oem
nylar357 said:
nah man you can actually unlock the bootloader without tmo carrier unlock and root...see my guide to do that, its as straight forward as any other oneplus, but basically you have to request the bootloader unlock code from oneplus, then assuming your carrier unlocked or use the guide to break the carrier lock functionality. If your already at that point grab the boot image for your version, store on device, root that image with magisk manager then flash it in bootloader
https://github.com/nylar357/nord_oem
Click to expand...
Click to collapse
As you can see in my message, bootloader is unlocked.
@nylar357 How can I "grab" boot image for 11.0.2 when not rooted?
bouyakasha said:
As you can see in my message, bootloader is unlocked.
@nylar357 How can I "grab" boot image for 11.0.2 when not rooted?
Click to expand...
Click to collapse
Root N10 using Magisk
Warning: I'm not responsible for any damage or bricked phones! Mirror for all OxygenOS images General Info: You need adb and fastboot installed and should know how to use it TWRP is not needed You must do this process only once...
forum.xda-developers.com
I'm sure you can find your img files here...
??? there is a MSM tool for TMo.
[OPN105G][OOS TMO BE88CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Use readback mode to get the stock root image.
Where can i get stock image for BE2025?
Need a stock image for metro pc n10 5g android 11 build 11.BE88CF so i can root. My device is now oem unlock by waiting 90 days. Cant find image on google.
forum.xda-developers.com
See last post for detailed instruction.
JazzieBoi said:
Root N10 using Magisk
Warning: I'm not responsible for any damage or bricked phones! Mirror for all OxygenOS images General Info: You need adb and fastboot installed and should know how to use it TWRP is not needed You must do this process only once...
forum.xda-developers.com
I'm sure you can find your img files here...
Click to expand...
Click to collapse
Nope. Not there for 11.0.2.BE88CB
arda99 said:
??? there is a MSM tool for TMo.
[OPN105G][OOS TMO BE88CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Use readback mode to get the stock root image.
Where can i get stock image for BE2025?
Need a stock image for metro pc n10 5g android 11 build 11.BE88CF so i can root. My device is now oem unlock by waiting 90 days. Cant find image on google.
forum.xda-developers.com
See last post for detailed instruction.
Click to expand...
Click to collapse
Trying this now, thank you.
arda99 said:
??? there is a MSM tool for TMo.
[OPN105G][OOS TMO BE88CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Use readback mode to get the stock root image.
Where can i get stock image for BE2025?
Need a stock image for metro pc n10 5g android 11 build 11.BE88CF so i can root. My device is now oem unlock by waiting 90 days. Cant find image on google.
forum.xda-developers.com
See last post for detailed instruction.
Click to expand...
Click to collapse
Thank you so much, this worked!!!
bouyakasha said:
Thank you so much, this worked!!!
Click to expand...
Click to collapse
So there's been an MSM download tool for the B88 this whole time while everybody was saying "there's no MSM for TMobile". ?!?!
bouyakasha said:
As you can see in my message, bootloader is unlocked.
@nylar357 How can I "grab" boot image for 11.0.2 when not rooted?
Click to expand...
Click to collapse
Use twrp
"If ever attacked by a polar bear, just remember x = r*cos(theta), y=r*sin(theta) and you can convert it into a harmless rectangular bear."
Great signature @SomeRandomGuy
Oops
you can install the global rom on both lito(metro) or billie. With or without locking the bootloader. that same process will unbrick the device as well, ive done it several times. if for some reason msm and the global rom disappeared, I do have it.
bouyakasha said:
Nope. Not there for 11.0.2.BE88CB
Click to expand...
Click to collapse
Here's one not rooted. Came from a restore package on telegram, you might check it out...it's 11.02 or 10.5.12 for restore .no msm needed...worked for me with fastboot.
##copy/pasted from telegram, I did NOT make these, just helping people save time.....oh if your on Linux run dos2unix on the bat file, you'll also have to change reboot-bootloader to reboot bootloader and set-active-slot becomes set_active a/b
**********************
I've put together two bundles to restore the OnePlus Nord N10 5G to Factory OS without the need for MSM Download Tool. One for OOS10 and one for OOS11.
Simply boot into the bootloader (Fastboot mode) and run the script! ("OnePlusNordN10_Restore.bat") (Roughly 5 minute duration to restore, give or take)
Note that all custom ROMs currently available require you to be on OOS10 in order to boot successfully. We hope to change this soon, but this is how it is for now until OnePlus properly re-syncs their Android 11 Kernel.
These are for the International variants only! If you require the European firmware, you will have to extract it's OTA payload and replace the appropriate files.
OnePlus OxygenOS 10.5.12
OnePlusNordN105G_Restore_OOS10.5.12_BE86AA
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
MD5: A5BF4C91124B75513159A8F55AEE944E
SHA-1: 57C5C87DF8CDB169076C57717A7F0F3045D361F3
OnePlus OxygenOS 11.0.2
OnePlusNordN105G_Restore_OOS11.0.2
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
MD5: 0CBA0395C8838F29B6728AF20B9CCA54
SHA-1: 160ACE7C2739027609785C5615FDB60601E824DF
Delete.
i updated to android 12, without any modifications prior, is it possible to root this phone still? or is there no root method for android 12 yet? i've been curious on rooting it for a little while now.
texas7412 said:
i updated to android 12, without any modifications prior, is it possible to root this phone still? or is there no root method for android 12 yet? i've been curious on rooting it for a little while now.
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/v60-bootloader-unlock-and-magisk-root.4358785/ Reports are saying it works fine.
surgemanx said:
https://forum.xda-developers.com/t/v60-bootloader-unlock-and-magisk-root.4358785/ Reports are saying it works fine.
Click to expand...
Click to collapse
Thank you! I hope it works fine for me.. i don't really want to kill my phone Lol i've had a lot of experience with rooting and unbricking phones, but i'm still a bit on edge especially with this one given its price compared to like $50 or less i've paid for others Haha
texas7412 said:
Thank you! I hope it works fine for me.. i don't really want to kill my phone Lol i've had a lot of experience with rooting and unbricking phones, but i'm still a bit on edge especially with this one given its price compared to like $50 or less i've paid for others Haha
Click to expand...
Click to collapse
We have the firehose for the V60!The possibilities are endless..lol..
surgemanx said:
We have the firehose for the V60!The possibilities are endless..lol..
Click to expand...
Click to collapse
i hate to say it.. but the tutorial isn't working for me in qfil it tells me "Please make sure you have selected the correct programmer in flat build page" i rebooted it into the 9008 mode 10-20 times now and it hasn't worked..
texas7412 said:
i hate to say it.. but the tutorial isn't working for me in qfil it tells me "Please make sure you have selected the correct programmer in flat build page" i rebooted it into the 9008 mode 10-20 times now and it hasn't worked..
Click to expand...
Click to collapse
Here,try this one.I just used it not even 10 minutes ago to make a full LUNS back up of a V60 I have laying on my desk.I'm actually using LUNS backups to crossflash other carrier V60's with AT&T software so the VoLTE works.
Edit:Oh,make sure you choose flat build.Then choose this firehose.
surgemanx said:
Here,try this one.I just used it not even 10 minutes ago to make a full LUNS back up of a V60 I have laying on my desk.I'm actually using LUNS backups to crossflash other carrier V60's with AT&T software so the VoLTE works.
Edit:Oh,make sure you choose flat build.Then choose this firehose.
Click to expand...
Click to collapse
this was certainly an interesting experience, i could unlock the bootloader, but doing it via the file thing provided it won't work, going to fastboot and doing fastboot oem unlock, then booting into a twrp recovery and flashing magisk v24.3, it bricked the OS and i had to fight to get it to boot, twrp broke and is locked it refuses to unlock, it gave me an odd looking recovery mode as if it was from android kitkat or something (thats the best i can describe it, it looked much different from the other recovery to wipe) and it said it couldn't boot android and it said to factory reset, so i did.. it downgraded me to android 11 and now its rooted but i can't update to android 12 now because of it being rooted? is there a way to update to 12 now?
texas7412 said:
this was certainly an interesting experience, i could unlock the bootloader, but doing it via the file thing provided it won't work, going to fastboot and doing fastboot oem unlock, then booting into a twrp recovery and flashing magisk v24.3, it bricked the OS and i had to fight to get it to boot, twrp broke and is locked it refuses to unlock, it gave me an odd looking recovery mode as if it was from android kitkat or something (thats the best i can describe it, it looked much different from the other recovery to wipe) and it said it couldn't boot android and it said to factory reset, so i did.. it downgraded me to android 11 and now its rooted but i can't update to android 12 now because of it being rooted? is there a way to update to 12 now?
Click to expand...
Click to collapse
Afraid not because OTA updates will look for rooted or bootloader unlocked devices and will normally give you a white screen error code.Nature of the beast I guess you could say.If you don't plan on doing a custom rom or trying to remove OEM software it's not really worth it honestly.
surgemanx said:
Afraid not because OTA updates will look for rooted or bootloader unlocked devices and will normally give you a white screen error code.Nature of the beast I guess you could say.If you don't plan on doing a custom rom or trying to remove OEM software it's not really worth it honestly.
Click to expand...
Click to collapse
Ahh okay. Thanks though! Do you know why it would have downgraded from 12 to 11 though? that doesn't really make any sense to me.. why did rooting downgrade without me installing an older system or anything like that?
texas7412 said:
Thank you! I hope it works fine for me.. i don't really want to kill my phone Lol i've had a lot of experience with rooting and unbricking phones, but i'm still a bit on edge especially with this one given its price compared to like $50 or less i've paid for others Haha
Click to expand...
Click to collapse
Think about it this way, a V60 with a broken screen is less than 100 bucks. If you brick it, you can fix it for far less than bricking any other phone in a similar class.
texas7412 said:
Ahh okay. Thanks though! Do you know why it would have downgraded from 12 to 11 though? that doesn't really make any sense to me.. why did rooting downgrade without me installing an older system or anything like that?
Click to expand...
Click to collapse
Now,that's an odd one.My thoughts would be because of the engineering bootloader that's written for unlocking purposes?Are you sure it was A12 to begin with?lol..
pflatlyne said:
Think about it this way, a V60 with a broken screen is less than 100 bucks. If you brick it, you can fix it for far less than bricking any other phone in a similar class.
Click to expand...
Click to collapse
And this is very true!The V60 was way ahead of it's time!It's a shame LG devices were never marketed properly and supported on a local retail level like they should have been.And even if you did brick them,worst thing would be peeling the back off and hitting the testpoint to bring it back to life.
surgemanx said:
Now,that's an odd one.My thoughts would be because of the engineering bootloader that's written for unlocking purposes?Are you sure it was A12 to begin with?lol..
Click to expand...
Click to collapse
Yes! I was so excited that i got 12 on it, the bootloader shows its android 12 though.. which is really confusing to me.. is there any chance there's an android 12 kdz for this phone floating around that i could try to root and flash? i'm kind of regretting it now, i can't get the fingerprint scanner working following the tutorial there.. i can't update to 12 again it just fails to download, my recovery mode is gone, i can't get back into the bootloader/fastboot mode only EDL mode but it won't recognize anything within windows, adb won't work nor fastboot, can i recover it still if i wish to go back to stock?
The good news is, it gets much better benchmark scores and is much much faster..
on geekbench, 1688 single core, 6203 multicore, it had a higher score but said it was invalid? that one was 4067 single core, 15601 multicore
antutu, it scored 695755 with just using kernel auditor and maxing out the cpu freq and setting gpu freq to 870mhz.
Edit: I just remembered, for where you mentioned the bootloader, i don't have the engineering one installed. i never got that far to even install it. just android debugging > oem unlock > fastboot > fastboot oem unlock
texas7412 said:
Yes! I was so excited that i got 12 on it, the bootloader shows its android 12 though.. which is really confusing to me.. is there any chance there's an android 12 kdz for this phone floating around that i could try to root and flash? i'm kind of regretting it now, i can't get the fingerprint scanner working following the tutorial there.. i can't update to 12 again it just fails to download, my recovery mode is gone, i can't get back into the bootloader/fastboot mode only EDL mode but it won't recognize anything within windows, adb won't work nor fastboot, can i recover it still if i wish to go back to stock?
The good news is, it gets much better benchmark scores and is much much faster..
on geekbench, 1688 single core, 6203 multicore, it had a higher score but said it was invalid? that one was 4067 single core, 15601 multicore
antutu, it scored 695755 with just using kernel auditor and maxing out the cpu freq and setting gpu freq to 870mhz.
Edit: I just remembered, for where you mentioned the bootloader, i don't have the engineering one installed. i never got that far to even install it. just android debugging > oem unlock > fastboot > fastboot oem unlock
Click to expand...
Click to collapse
That depends on what model of V60 you have?Most of the kdz files for Verizon or T-Mobile can be found at the link below.AT&T or Sprint no kdz's to be found except back up Qfil copies I have found.Take a look,and LGUP it if you find the firmware you want.Most will be A11 and you can just OTA back to A12 with no problem.
Models - LG-Firmwares.com
Free archive of LG firmwares. Comparison of features and reviews of all mobile devices. Quick download of updates for your device.
lg-firmwares.com
surgemanx said:
That depends on what model of V60 you have?Most of the kdz files for Verizon or T-Mobile can be found at the link below.AT&T or Sprint no kdz's to be found except back up Qfil copies I have found.Take a look,and LGUP it if you find the firmware you want.Most will be A11 and you can just OTA back to A12 with no problem.
Models - LG-Firmwares.com
Free archive of LG firmwares. Comparison of features and reviews of all mobile devices. Quick download of updates for your device.
lg-firmwares.com
Click to expand...
Click to collapse
okay good! Thank you! Is there any chance of a android 12 KDZ for the t-mobile variant? and if i flash back an original KDZ, will i have to wipe everything again? Thanks.
texas7412 said:
okay good! Thank you! Is there any chance of a android 12 KDZ for the t-mobile variant? and if i flash back an original KDZ, will i have to wipe everything again? Thanks.
Click to expand...
Click to collapse
If you refurb it with LGUP it will wipe it all.The T-Mobile model has A12,but no physical kdz as of yet.So,you'll have to OTA back to A12 once you set it all back up.
surgemanx said:
If you refurb it with LGUP it will wipe it all.The T-Mobile model has A12,but no physical kdz as of yet.So,you'll have to OTA back to A12 once you set it all back up.
Click to expand...
Click to collapse
do i have to refurb to go back to stock, or can i do it via the upgrade option? Sorry if i'm being bothersome lol
surgemanx said:
If you refurb it with LGUP it will wipe it all.The T-Mobile model has A12,but no physical kdz as of yet.So,you'll have to OTA back to A12 once you set it all back up.
Click to expand...
Click to collapse
HEY! SO I FLASHED THE STOCK BOOT A AND BOOT B AND THEN IT LET ME UPDATE TO 12!
i let the update do its thing, reflashed TWRP and then flashed the patched boot a and b, now i have a rooted android 12. WOOHOO!
texas7412 said:
HEY! SO I FLASHED THE STOCK BOOT A AND BOOT B AND THEN IT LET ME UPDATE TO 12!
i let the update do its thing, reflashed TWRP and then flashed the patched boot a and b, now i have a rooted android 12. WOOHOO!
Click to expand...
Click to collapse
Yes,that wil work until the next update.If it's modified when the next OTA hits,it will give you the update error.Basically,you just set it back stock and the update works.But,glad you have it worked out.