Hello everyone I'm using a pixel 3 and have a pair of isotuenes Xtra 2.0s I use at work for hearing protection and entertainment. My phone only rings Through the headphones when they are connected via Bluetooth. Is there a way to make my phone always ring through both it's it's speaker and the headphones?
I'm missing calls because thought-out the day I have to remove the headphones to talk to customers or co-worker and the only solution I've found so far is turning Bluetooth off when I have the headphones removed but this is a hassle because my work environment is constantly changing.
I appreciate any recommendations,
Thanks
Try turning on vibration notifications for it maybe as a work around.
Related
Hi All
I have been told by o2 that the following is a feature:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker.
Is this a feature or a fault?
Comments gratefully received
I'd say bit of both.
I've had my headset plugged in and heard the ringtone through both the headset AND the unit itself, but perhaps there's a way of making it so that the headset is the only audio (perhaps plugging the jack in whilst on silent then turning it back up?).
I've definitely had the headset ring out whilst the jack is connected.
A
Feature or fault, that's a hard one to call!
I would say it working as designed, since the headset will always override the speaker in any fashion. :wink:
I've never heard of this. All the US units ring in BOTH if the headset is plugged in. Unfortunately, message notification and alarms sound only in the headset though.
Hi,
As far as I have found out the behavior is not consistent. My device sometimes only ring in the headset and sometimes ring both. I have found out if you plug in the headset and connect via USB cable to the PC it will always ring both in headset and speaker. This is true even after you have unplugged the USB. Seems to me some flag I set during USB connation that enables this... ?!
For notifications - this only works via the headset... for me at least.
I find this annoying - the SmartPhone works as it should in regards to this.
I run 4.00.05 baked at this site... keep up the good work !
I had this similiar feature/bug experience too.
My XDA rings both on the headset and its speaker. One day, at some point, I managed to put it into a strange state. I started playing an mp3 with the windows media player (WMP) without the handset, it played thru its speaker (that's correct). And then I plug in the headset, mp3 came out from only the headset (that's correct too).
After that, I pressed "stop" the mp3 in the WMP, and then "play" again, mp3 came out thru both the headset and its speaker.
I don't seem to be able to reproduce this "feature" anymore now. Well, of course, that's after a reboot a while later.
In fact, now I've got a question then. Does that mean the on/off of the speaker can be controlled in software? AFAIK, like the iPAQ, it's controlled in the hardware, that means if you plug in a headphone, the speaker of the unit will be off.
Does that mean the on/off of the speaker can be controlled in software?
Click to expand...
Click to collapse
Yes, evidenced by the phone behaviour. Most devices use a simple contact in the headset connector to disengage the speaker, but obviously not the PE.
DP00PM said:
When my XDA has an incoming call, with the headset plugged in, the 'ringing' only sounds from the headset instead of the speaker. Is this a feature or a fault?
Click to expand...
Click to collapse
I would rather ask it to be a user defined option. I believe the current setup (both ringing) came after noticing that you can simply forget your headset plugged in so you may miss some calls.
But in some situations (ex: meetings) I would like to keep the headset plugged in and get the rining only through it.
hi
I walk to work and back everyday and I listen to my DAB radio all the time.
Problem is (and I realise its not the biggest problem in the world) I can't hear my phone so always miss calls.
Can anyone think of a solution so I can get audio from my DAB into the Hermes so I can listen to the radio and when I get a call, it interupts the audio? I thought about using the mini usb but that only has a mic in and if I use that, if the phone rings all they'll hear is my radio
Its a big of an expensive solution but would this work?:
http://www.sony.co.uk/view/ShowProduct.action?product=TMR-BT10
So I bluetooth audio to my Hermes then use the wired headphones/mic to listen to it and if I get a call, the audio stops?!
Would that work?
thanks in advance
cel
You could just have your phone on ring AND vibrate and keep it in your pocket so you feel it.
Just an idea
Try these instead. http://www.plantronics.com/north_america/en_US/products/cat1150057/cat5420035/prod29780013
I have had a pair for about a year and the sound is great. You can connect the included dongle your DAB or any other non blue tooth audio device and set up a link between your phone and the dongle with the headset. While you are listening to your music from the DAB if you receive a call the headset silences the music and you can answer the call directly from the headset. When the call ends your music resumes automatically. I may be a little pricier than device you listed but works like a charm.
Note make sure you look at the 590a not the 590e. The 590e does not include the dongle.
Also don't purchase it directly from Plantronics site. You can get it for about $100 if you search the web for it.
Hallo,
what can I do to have the following behaviour:
I need to hear an arriving phone call on the mobile device even if I have connectet it to a Headphone (bluetooth or cable). (I often carry the activated bluetooth headphone in my bag but than I don't hear anny call because its only ringing in my headphone)
can anybody help me?
Several options. The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
The 2nd option is to disable A2DP on the phone. There are several apps out there that make this easier than going into Settings. I use a Today screen plug-in called A2DP Toggle, www.teksoftco.com, free. But the version I have is buggy.
The 3rd option is to disable BT on the phone, again there are tools out there that make this easier. A2DP Toggle can be set to also disable BT when you turn off A2DP.
I have never heard of a tool that lets you direct specific notifications to the various outputs but it makes perfect sense. There should be lots of options that we just aren't given in WM, like keeping the phone from turning off the backlight during a phone call.
The easiest is when you put your BT headphone in your bag, turn it off. Saves your headphone battery, too.
Click to expand...
Click to collapse
The problem on this way is, that it takes some time to turn the BT headphone on. So I sometimes lost a call, because I was to slowly...
My BT Headphone has a standby Time from more less 5 days! - so battery is no problem.
The way to disable A2DP brings that I can't use e.g. Voice Command over BT Headphone, isn't it?
So maybe there is no solution for my problem?
(The Athena cant "talk" quit... so I need the Headphone, when I get Calls - I don't like that everybody how is around me hear what the "caller" tells me...)
Over the weekend I had headphones plugged into my phone with music streaming (via TCPMP) and a call came in. It switched the audio over to the external speakers, then paused it, and played the ring tone over the external speakers.
Just what you wanted, right? I'm using the AP4 ROM, don't know if that is the difference or just using TCPMP.
I am sure this may be an issue for some people. my car stereo has bluetooth that links with my phone and mutes the car stereo and turns on speaker phone when a call comes in. i like the fact that it mutes the stereo since i usually have it very loud, but my problem is i cant set it to default to the phone earpiece and not the speakerphone, even when i answer a call and press the button to keep it on the ear piece, it switches right back to the stereo a second later, i press it again and it stays on the phone. i have had this issue with all my other phones as well and it drives me nuts. is there anyone who can come up with a fix for this?
i appreciate any input anyone may have on this.....
thanks
It is not a problem with the phone, it is to do with bluetooth profiles as they are designed to communicate with TWO devices not THREE. I also use car stereo for playing my music. I do not get that many calls while driving so I never use my bt headphones.
Moved to proper forum.
sorry about posting in the wrong forum. I am only trying to get it to default to the handset when i pick up a call. i do not use it to play music, so i have no need for that to even be an option, i just want to be able to pick up a call on my phone, and have it stay on my phone while it uses the bt link to mute and un mute the stereo. i find the speakerphones in car stereos to be totally worthless for talking, but i find the mute feature very useful.
Anyone able to solve the problem that seemly all Android phones have?
- If headphones are plugged in and we get an incoming call, the ringtone will play on both speaker and headphones.
- If headphones are plugged in and we get a notification, the sound will only play through speaker.
What I want is that nothing comes out of the speakers and only through the headphones.
So far, I am able to use Tasker to put the phone in Silent mode when headphones are plugged in and then toggle it off when headphones are not in. Problem with this is that the phone won't vibrate or ring at all when there's an incoming call and the same with texts/e-mails.
Mine only does through headphones. Newts latest release and SlimROM latest.
ReZound
That's weird cause I get notifications/ringer switched when the headphone jack is in use and then the speaker is used when the jack is not being used... o.o
I think you can try DSP Manager. If I remember correctly it has an option to control those settings...
I'm using latest SlimROM...I've had this problem with every single Android I've owned.
I'm guessing no one else notices this or has this problem.
I found a Tasker script that might work:
http://forum.xda-developers.com/showthread.php?t=1559541