Related
Redmi K20 Pro
[Raphael]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Drivers
Mi Flash
Minimal ADB and Fastboot
Unlock Bootloader
Unlock Bootloader
Unlock here
*AMD Ryzen System has a issues in Unlocking Bootloader try another PC (Intel System)
TWRP Recovery
TWRP
TWRP auto install
Unofficial TWRP 3.3.1 Recovery - RU and Eng
Unofficial TWRP 3.3.1 Recovery @nikk3d - Multilingual
Unofficial Pitch Black Recovery @nikk3d
OrangeFox Recovery Official R10
TWRP Recovery for Android Q
/ Installation
Root
Magisk Stable
Magisk Manager
Firmwares
China MIUI 11
9.9.9
9.9.6-9.9.9
9.10.8
11.0.2.0
11.0.3.0
11.0.1.0.
11.0.4.0
11.0.5.0
9.12.27
Global Stable
10.3.3.0 Fastboot
10.3.3.0 Recovery
Global Beta
China
V10.3.6.0.PFKCNXM Fastboot
V10.3.7.0.PFKCNXM Recovery
V10.3.7.0PFKCNXM Fastboot
V10.3.8.0.PFKCNXM Recovery
V10.3.8.0PFKCNXM Fastboot
V10.3.9.0PFKCNXM Recovery
V10.3.10.0PFKCNXM Recovery
V10.3.110.PFKCNXM Recovery
V10.3.12.0PFKCNXM Recovery
V10.3.14.0PFKCNXM Recovery
V10.3.16.0PFKCNXM Recovery
V10.4.4.0 RecoveryQFKCNXM
V10.4.4.6 RecoveryQFKCNXM
OTA
10.3.10.0 to 10.3.11.0
10.3.8.0 to 10.3.10.0
10.3.7.0 to 10.3.8.0
10.3.9.0 to 10.3.10.0
Beta
9.6.11
9.6.20
9.7.4
9.8.12
9.8.21
9.9.3
India
Stable Firmwares
10.3.3.0 Fastboot
10.3.5.0
10.4.7.0 Android Q
10.4.8.0 Android Q
Beta
Global
EU
9.6.13
9.6.20
10.3.9.0
10.3.10.0
10.3.11.0
9.6.27
[URL="https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv10/xiaomi.eu_multi_HMK20ProMI9TPro_V10.3.12.0.PFKCNXM_v10-9.zip/download"]10.3.12.0[/URL]
9.7.4
10.3.14.0
10.3.15.0
9.7.11
9.7.18
9.7.19
10.3.16
9.7.27
9.8.1
EU Android Q 9.8.8
9.8.12
9.8.15
9.8.22
10.3.17
EU Android Q 9.8.29
EU Android Q 10.4.4.0
9.9.3
9.9.6
10.3.30
EU Android Q 10.4.6.0
MIUI 11 9.9.26
MIUI 11 9.10.10
MIUI 11 11.0.2.0
MIUI 11 9.10.24
MIUI 11 9.11.7
MIUI 11 9.11.14
MIUI 11 9.11.21
MIUI 11 9.11.22
MIUI 11 9.11.28
MIUI 11 9.12.5
MIUI 11 9.12.12
MIUI 11 9.12.27
MIUI 11 20.1.16
Global EEA
10.3.1.0 PFKEUXM Fastboot
10.3.1.0 PFKEUXM Recovery
10.3.3.0 Recovery
Mi-Room
9.6.20
9.6.27
9.7.4
9.8.1
9.8.22 Android Q
9.8.29 Android Q
9.9.6 Android Q
MiuiMix
10.3.17.0
Mi-Italia
10.3.16.0
MIUI MS
9.7.18.9
9.7.25.9
9.8.1
Android Q 9.8.8
*Back up everything and Flash via TWRP Recovery
*For Raphael only (China ROM)
9.8.8 Q
9.8.8-9.8.29 Q
9.8.29 Q
MIUI 11 9.9.24
MIUI 11 9.9.25
[URL="https://hugeota.d.miui.com/9.9.26/miui_RAPHAEL_9.9.26_c74ffeeec0_10.0.zip"]MIUI 11 9.9.26[/URL]
Revolution OS
9.9.7
Google service error flash this
9.9.21 Q
9.9.21 Pie
Android Q [Unlocked Bootloader]
Beta 1
TWRP RESET Password
If you forget the password go to TWRP Recovery and Flash.
Removing Bloatwares in Locked/Unlocked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
The Ultimate Guide for Redmi K20 Pro [Raphael]
Fake Global ROM to Chinese ROM to Global ROM/EU/Mi-Room
ATTENTION!*All that you will do with the phone is guided by this guide - it lies in the area of your personal responsibility only.*Neither I nor other members of the forum, not the administration of the forum are responsible.*
If you do not understand something and the written guide below - contact the LS to knowledgeable colleagues, as I did!*Hide created for the Chinese version of the phone K20 Pro - Global ROM.*(for India it will not work!)*
I will explain in stages what to do, giving my comments in my simple language: what?*What for?*Why?*Don't be scared that there are a lot of points - I tried to chew everything up.
So what do we have?*
• K20 Pro - Global ROM (Installed by the Chinese firmware, with no updates, poor translation, with not working Gpay)*
• You must create an official mi account and link the device to it.*
What do we need?:*
• Installation Recovery - Orange fox (Advanced replacement of standard Recovery, and installation of any firmware) - Wildly necessary thing!*
• Installing the firmware MI Room 9.7.4*
• Proper operation of the GPAY through the patch*
Introduction)*
So, you got a phone from China.*What do you have in your hands?*This is the device on which the Chinese put the left firmware and at the same time did not unlock the bootloader officially - which is not compatible with the transition to any, really good firmware.*
Before we begin - the most important thing!*(further quote from the forum):
ATTENTION!*CHINESE VERSION REDMI K20 PRO CAN BE BLOCKED ONLY ON THE CHINESE FIRMWARE!*Before carrying out any operation, read the materials that are referenced in the header themes, check Search by topic, and if not found the answer to your question, or do not understand something, ask more experienced users.*
Do you understand?*Now read again 20 and memorize this phrase!*
INSTALLATION OF THE CHINESE OFFICIAL FIRMWARE AND LOCKER DOWNLOAD AND UNLOCK!*
What for?*Your phone needs to be unlocked officially.*To do this, you must put the official firmware and file for unlocking officially.*
What is needed (all in the header):*
•Firmware file - *10.3.6.0 China Fastboot
• Program MiFlash 2018.11.15.0 (we need administrator rights) - a program to install Fastboot-type firmware and lock the phone loader.*
• Driver for computer - ADB Driver Lite
• Program - miflash_unlock*
• Phone*
• Type C Cable*
1) Download all of the above and check that everything downloaded*in the right “size”.*
2) Install MiFlash 2018.11.15.0*on the C drive:
3) Go to MiFlash 2018.11.15.0 - it will offer to install the drivers.*Do not hesitate to install everything - exit the program!*
4) Install ADB Driver Lite (by default it is set by MiFlash but will not be worse if you additionally install the latest driver from the header)
5) - CORRECTLY unpacking the firmware 10.3.6.0 China Fastboot!*By default, you download it with the extension .tgz!*The file you downloaded will be called raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tgz*
- Unzip this .tgz file and get a file with the .tar extension.*The full name will be - raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tar.*
- Unzip this .tar file and get a folder named raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn.*Here we will work with this folder in the future!*You need to move it to drive C:!*It is important!*
6) Switch the phone to debug mode via USB.*(I think there will be no problems here)
7) Transfer the phone to FASTBOOT mode.*Turn off the device.*Clamp the power button + volume rocker down.*If there is a hare and the inscription Fastboot then everything is OK!*
8) In MiFlash, press the Select button, specify the path to the folder with the firmware raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn and click ok.*
9) Something like this should appear in the line:*С: \ raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn
10) Put a clean all and lock checkbox at the bottom.*This parameter means that the*
phone will be erased while all data is erased, and the bootloader is locked.*(only for the Chinese version of the phone)*
11) We connect the phone (in fastboot mode) to the computer through the official drawstring.*And without any USB hubs and adapters!*
12) Press the Refresh button.
13) If everything is correct then a line should appear with the id of the phone and the status ready.*
14) So, the phone is recognized.*The path to the folder with the firmware is specified.*Galka clean all and lock costs.*Press the flash button.*
15) The phone starts to sew!*Do not unplug the power cord!*don't touch anything at all.*Do not breathe!*The firmware time is about 10 minutes.*
16) At the end of the firmware, complete will appear in the line with the execution status and the phone will restart (up to 10 minutes) to the initial welcome screen.*Disconnect the phone.*
17) Hooray you flashed to the Chinese firmware and officially blocked the phone.*Let's start the activation and application for unlocking.
18) The first thing that will meet you is the screen in Chinese.*With two button in Chinese.*Push first you are asked to enter something ... This is the password from your mi account.*We enter.*
19) Tap on the second button connect to the Wi-Fi or skip.*
20) Choose the English language.*Customize your phone.*
21) Transfer the phone to the developer mode.*In the settings of the developer, we go into the unlock status (I don’t remember exactly how to speak English).*We see the closed lock, below we see the button.*Click on it!*And we will register the phone for the official unlock (Wi-Fi should be turned off and mobile networks on).*
22) Next, go to the mi account and check that your mobile phone is tied.*Are you convinced?*I recommend to look at the corresponding topic on the forum with the video.
23) On the PC, run miflash_unlock.*Log in to your mi account.*The phone is transferred to the Fastboot mode (point 7) and connected to the computer.*Press the unlock button.*At the same time, we confirm a bunch of times that we are sure that we want to do this.*All your data will be destroyed.*
24) The PC starts to unlock and at some point gives a message that the unlock failed and should be tried again after 168 hours.
25) Congratulations, you activated the counter before unlocking.*You walk with the phone 7 days on the Chinese firmware.*Is it hard?*Well no.*You can take the apk with Google services from the page on this forum and install what you need.*
26) It's been 168 hours, and you're ready to unlock.*
27) But before you do ... Update your phone over the air to the latest version - nowhere on the forum it is not written (I have not seen) but this is important.*I will explain later why!*Remember this item.*
28) Start and repeat paragraph 23. And lo and behold!*The unlock process has begun.*And at the end there is an inscription that the phone is unlocked.
29) Now, when you boot your phone, you should see Unlocked.*Check out what it is!*
30) Configure the phone again.*Turn on USB debugging mode.*
31) Further, in my opinion the most dreary, because the forum has a lot of conflicting information.*I will tell you how I did.*But before continuing, I can say that since you have already received unlock, it is almost impossible to turn the phone around (but everything is possible)*
32) So, download three things:*
- TWRP-3.3.1*
- OrangeFox R10.0 Recovery*
- MI Room 9.7.4 firmware
33) Everything that you downloaded in the zip archives.
34) Unzip -TWRP-3.3.1 to drive C. Transfer the phone to Fastboot (item 7) and connect it to the computer.*We find in the unpacked folder TWRP file with the extension .bat.*in different versions of TWRP called differently.*I called Flash_twrp.bat*
35) And before*proceeding, I’ll*remind you about clause 27).*The fact is that I could not install TWRP without updating over the air.*Therefore, you must first install the update.*And on the firmware 10.3.6.0 China Fastboot.*- It will not work to put TWRP and you will have to do a lot again*
36) Start and get the menu in my Russian language, where we select the auto installation (1).*After a couple of seconds, your phone should reboot into TWRP recovery.*There we choose the language if asked.*
37) And
so, we are in the main menu of TWRP.*We need to take a series of actions*(in a strict order)
38) Go to the Wipe point and select FORMAT DATA -> svayp -> type yes.*The formatting process takes a couple of seconds.*What does this item do in my understanding?*He decrypts the data on the phone, which is necessary to throw on the phone firmware and Orange fox.*
39) Exit the main menu by clicking REBOOT Recovery.*The phone should reboot into the main menu again.*And on the PC, it should be defined as a phone with Internal storage.*Go to the Internal storage on the PC.*See the TWRP folder?*If yes, then everything is OK!*
40) On the phone, go to the Wipe point and select Advanced wipe -> svayp -> select all the items*except System and OTG* svayp
41) Exit the main menu, press REBOOT -> Recovery.*The phone should reboot into the main menu again.*
42) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded OrangeFox R10.0 recovery directly into the zip archive.*
43) On the phone, go to the Install item and see our Orange Fox.*Choose it.*AND THERE IS THE MOST IMPORTANT!*He will ask you to install two checkboxes before installation: one of them Verification of the ZIP signature (in English) and so this checkbox must be removed, otherwise the error will be.*We start the installation.*Your phone must reboot into Orange FOX.*
44) So what is Orange Fox?*This same TWRP is simply much more convenient and stable.*
45) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded firmware to the worlds.
46) In Orange Fox, select this firmware, also remove the checkmark ZIP signature check (in English).*And start the process of installing the firmware.*
47) Hooray you got the best, in my opinion, firmware)*
48) Disconnect from the computer.*Customize your phone.*
49) Installing a patch for Gpay is easy.*Straight from the phone, download the patch file.*
50) Put the phone in orange fox recovery mode.*Turn off the device.*We press the power button + volume rocker UP (not to be confused with the power button + volume rocker DOWN for Fastboot boot mode)*
51) In the Downloads folder we see our patch and install (also remove the Check Signature ZIP checkbox).*
52) Congratulations!
Thanks to
helpbabay911
Mysttorent
Viper4Android + DDPlus and Google Pay Fix for Redmi K20 Pro
Google Pay Fix
•TWRP Recovery from our site
•Do not install the patch simultaneously with other patches or firmware.
•Install the patch only on top of the installed firmware. If you have made a date wipe, first launch the firmware, perform the initial setup, and then install the patch itself.
•Before installing the patch, make sure that the Data section is mounted (usually it is mounted by default on all TWRPs).
Download
*Credits to Mi-Room RU
Viper4android + DDPlus =
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
Profiles with IRS 1
Profiles with IRS 2
Profiles
DDPlus
AML (You can download from Magisk Repo)
ACP (You can download from Magisk Repo)
Viper4android (You can download from Magisk Repo)
Reserved 3
Reserved 4
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Thank you for your amazing work!
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
Yes, you can flash it with TWRP. That's the multilanguage rom with Google Play preinstalled and without the bloatware of the Chinese version.
madsponge26 said:
Reserved 1
Click to expand...
Click to collapse
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
melmarPH said:
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
Click to expand...
Click to collapse
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
madsponge26 said:
Reserved 4
Click to expand...
Click to collapse
Hi, Please update the thread, here's a fastboot link for Firmware 10.3.7.0
https://bigota.d.miui.com/V10.3.7.0...FKCNXM_20190528.0000.00_9.0_cn_8b5bfd6d56.tgz
and 10.3.8.0
http://bigota.d.miui.com/V10.3.8.0....FKCNXM_20190601.0000.00_9.0_cn_beb2b2a432.tgz
Robbo.5000 said:
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
Click to expand...
Click to collapse
That's crystal clear. Thank you so much..
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
I would not suggest to flash it right now as a daily driver, here is a review for xiaomi eu rom.
https://www.youtube.com/watch?v=mTi8nYMJRx4
sorry can i ask 9.6.11 is global beta rom or china rom?
What is the wait time to unlock the bootloader?
bretzelpopo said:
What is the wait time to unlock the bootloader?
Click to expand...
Click to collapse
7 days
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
I was with the same doubt. is that rom really a Beta version of the global rom?
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
rafa_martineiz said:
I was with the same doubt. is that rom really a Beta version of the global rom?
Click to expand...
Click to collapse
9.6.11 is China Beta
9.6.13 is EU version which is from Xiaomi.EU . Unofficial global version based on China ROM that removes all chinese bloat and adds more languages.
New Links!
10.3.6.0 for Recovery
http://bigota.d.miui.com/V10.3.6.0.PFKCNXM/miui_RAPHAEL_V10.3.6.0.PFKCNXM_e679907a50_9.0.zip
10.3.9.0 for Recovery
http://bigota.d.miui.com/V10.3.9.0.PFKCNXM/miui_RAPHAEL_V10.3.9.0.PFKCNXM_bd915c4259_9.0.zip
MIUI 10 10.3.9.0 Android Pie 9.0 is up!
Changelog
MIUI 10 EU 10.3.9.0 Android Pie 9.0 is up!
Changelog
64-bit Base Package For GSI Redmi 7A
Flashing instructions ?
• Boot to recovery
• Flash given zip file (Downloads section)
• Wipe system
• Flash any arm64 GSI of your choice to system image
• Format data, wipe cache
• Flash gapps, magisk, etc...
• Boot to system, congrats you're on arm64.
Changelog:
- Fixed camera service crashing.
- Gcams can now run on Enforcing mode.
- Swap is disabled by default in favor of ZRAM.
- Fixed more services crashing that just filled up the logcat.
- Changed to Global for better overlay compatibility
- ViperFX now works in Enforcing mode where as before it would be unstable.
- Camera doesn't take as long to launch now.
Old Changes (from previous vendor/post):
• Fix bt audio, cleanup audio configs
• Add exfat fix
• Fix headphones
• Fix video recording
• Enable pseudo-gyro (emulated gyroscope from miui)
Downloads :
Base
mirror link
Bugs ?
• VoLTE doesn't work (fix: https://t.me/Redmi7AUpdates/98)
Things to point out:
- As mentioned on the previous release, Pie and Amber/Erfan based GSIs can't boot on Enforcing mode, in which case the Permissiver v5 zip from #permissiver is necessary.
- The FM Radio fix found in notes doesn't work anymore, use this instead (http://www.mediafire.com/file/wgnysvjo362yuco/FM_Radio-Fix.zip/file) and flash through Magisk.
- If you are having any camera related issues then switch to Permissive mode.
-Fixed some stuff and made a new one.
-Sadly, upgrading directly from the old one isn't possible and formatting data is required, I tried to make it upgradable but with no success.
*Currently using Havoc os 3.8"
And credits to telegram redmi 7a team and for the developers who work so hard for this project I do not own this work
Join here need telegram app on windows and android and dont forget to like my post https://t.me/PineOfficial
just flash permissiver to make wired headphone work
for me blissrom arm64 is smooth with face unlock unless u use android 9 as base firmware to have encryption or else u cant add password
daizu said:
just flash permissiver to make wired headphone work
for me blissrom arm64 is smooth with face unlock unless u use android 9 as base firmware to have encryption or else u cant add password
Click to expand...
Click to collapse
True, use MIUI A9 base to get encryption working on TWRP.
No chance to get this working on MIUI?
iagm12 said:
No chance to get this working on MIUI?
Click to expand...
Click to collapse
theres no way and also memeUI sucks
Custom Roms GSIs are better
edit:
there is new a update bluetooth already fix and other bugs..
iagm12 said:
No chance to get this working on MIUI?
Click to expand...
Click to collapse
You could try to use this on a MIUI GSI ported from the Redmi 8 maybe, but I don't know if it would work completely.
Maybe Erfan's GSI builds? https://mirrors.lolinet.com/firmware/gsi/MIUI/
---------- Post added at 03:24 PM ---------- Previous post was at 03:22 PM ----------
Also, not to nitpick, but my username is different in XDA.
https://forum.xda-developers.com/redmi-7a/how-to/redmi-7a-arm64-kernel-t4134381
I'm the kernel dev.
---------- Post added at 03:29 PM ---------- Previous post was at 03:24 PM ----------
Also, I'm going to try out Ubports if I can. It would be interesing to see if it would work because of the Q vendor.
Great Work, congrats <3
i have ask helios developer (maintainer of helios gsi) to resize the gsi of redmi 8 (redmi 8 has 3.5 gb raw image that cant be flash easy to our phone which has only 3gb)
"Flash any arm64 GSI of your choice to system image" i dont know what is this, but can u give me yours?
all using just twrp to flash?
How did you root your device? Im currently on MIUI 11.0.3 Q and there's no TWRP or any magisk rooting files/guide that is updated.
Good work btw. If you can share your rooting method and TWRP this can be an ALL IN ONE guide. Many thanks!
EDIT: Its working right now, but thing is I cant flash anything from internal storage, it shows weird letters (encrypted). Its Pitch Black Recovery 3.0. How did you solve this?
regularfanb0y said:
EDIT: Its working right now, but thing is I cant flash anything from internal storage, it shows weird letters (encrypted). Its Pitch Black Recovery 3.0. How did you solve this?
Click to expand...
Click to collapse
Had the same situation here on my 7A with TWRP, i also couldn't transfer the files via file Explorer from Windows to the 7A
because of the encryption (the copy and paste window doesn't do anything and disapears after a while).
Solution to this is:
Format Data > Yes
[Warning - outdated - OP has replaced the fw+vendor file 11.0.3 to 11.0.11]
Explaning some stuff about GSI basics
If this GSI stuff is also new to you like it is to me:
When working with GSI it's important to understand that the version which is currently running on your device, lets say V10.2.5 for example,
has the same version of your patched boot image (actually the boot image is build to fit for the currently running version i guess)
In this Thread the Base (11.0.3 Q FW) must have the same Version as the currently running version.
At the beginning i didn't know how this should work out because in all the other GSI Rom guides there is a patched boot image file in use
but if you want to use this Base (11.0.3 Q FW) there is no V11.0.3 GLOBAL patched boot image file to use?, just russia.
(see https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305 link in download section)
but then i read somewhere that the boot img also/always is part of the stock image and then i saw that the actual stock image from c. mi. com homepage is V11.0.3.
the second thing that doesn't made sense to me was: does Base (11.0.3 Q FW) mean you only can run Android 10 on it and why are there "higher versions" like Base (11.0.7 P FW) for the older Android P?
but anyway i had all the needed files to give it a try.
Instructions how to get from some sort of a corrupt status xy --> StockRom
Because i did some testing with Rom's i needed a "starting point" = this means unlocked Bootloader, Stock Rom V11.0.3, recovery installed
This was necessary for me to find out what step causes problems and also to "reset" the boot.img if i used a patched one
So this was my loop i did everytime to get from some sort of a corrupt status "xy" back to "starting point":
Enter Fastboot mode (Vol-Down & Power)
Install Stock Rom "pine_global_images_V11.0.3.0.QCMMIXM_20200717.0000.00_10.0_global" from c .mi .com homepage by using the software "MiFlash 2020.3.14.0"
(if you use MiFlash for the first time go to Driver --> install & wait for weird message.)
(it's important to use the V11.0.3.0. if you want to run the "64-bit Base Package For GSI Redmi 7A")
if your bootloader is unlocked at this moment choose "clean all" at the bottom of MiFlash instead of "clean all and lock".
("clean all" always ends with the error "error: Not catch checkpoint (\$fastboot -s .*lock), flash is not done" but you can ignore this one)
After install Stock Rom is finished let the device boot to system
if you already have a unlocked bootloader and you used "clean all" option you can now shut down the device and then enter Fastboot mode (Vol-Down & Power)
if you used "clean all and lock" with a previous unlocked bootloader you can quickly unlock it again by entering Fastboot mode and using the "Mi Unlock" software for Windows.
if your bootloader was never unlocked before you now have to do the complete process:
enable the developer options, go to "Mi unlock status" and register/LOGIN ON YOUR DEVICE into Mi-Account, install "Mi Unlock" software on PC and then you can unlock it.
anyways, if your bootloader is unlocked - shut down the device and then enter Fastboot mode (Vol-Down & Power)
[not flashing boot.img, already mentioned why not ]
use fastboot to flash vbmeta.img
vbmeta file
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use fastboot to flash recovery.img
TWRP recovery
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
go to recovery by holding Vol-Up & Power
-->my starting point to testing different settings...
Wipe Dalvik / ART cache, System, Data, Cache.
Format Data > Yes
Do not wipe Internal Storage!
copy the following files to the devices sdcard:
Base (11.0.3 Q FW) - fw_vendor_pine_64bit-rel_11.0.3MI.zip File from download section [Warning - outdated - OP has removed this file]
"lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN.img" (thats the one i've used but any arm64 GSI of your choice should work)
link in Download section at: https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Permissiver v5:
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
FM Radio fix: [EDIT: dont use this because LOS bootscreen will stuck in a flickering loop]
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use FM-Radio_(GSI).zip instead [EDIT: app doesnt work because of errormessage]
https://forum.xda-developers.com/attachment.php?attachmentid=4937895&d=1580288989
worked for me, thanks @dmitrypershin2015
Flash fw_vendor_pine_64bit-rel_11.0.3MI.zip aka "Base (11.0.3 Q FW)"
Wipe system
Flash any arm64 GSI of your choice to system image
Reboot to Recovery
Flash Magisk (optional) (not tested here)
Flash Permissiver v5
Flash GApps (optional) (not tested here)
If you get 'insufficient space' error, first resize System partition.
Flash FM-Radio_(GSI).zip
Reboot system and enjoy.
As already mentioned the FM Radio fix doesn't work, if you skip it LOS boots perfectly
another bug: No other color of the Notification LED than white
Somewhere in the Forum there is a link to Permissiver v4 instead of v5, cant say if v4 works fine but v5 does
mYXiao said:
I had some troubles getting this running, but finally i made it
If this GSI stuff is also new to you like it is to me:
When working with GSI it's important to understand that the version which is currently running on your device, lets say V10.2.5 for example,
has the same version of your patched boot image (actually the boot image is build to fit for the currently running version i guess)
In this Thread the Base (11.0.3 Q FW) must have the same Version as the currently running version.
At the beginning i didn't know how this should work out because in all the other GSI Rom guides there is a patched boot image file in use
but if you want to use this Base (11.0.3 Q FW) there is no V11.0.3 GLOBAL patched boot image file to use?, just russia.
(see https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305 link in download section)
but then i read somewhere that the boot img also/always is part of the stock image and then i saw that the actual stock image from c. mi. com homepage is V11.0.3.
the second thing that doesn't made sense to me was: does Base (11.0.3 Q FW) mean you only can run Android 10 on it and why are there "higher versions" like Base (11.0.7 P FW) for the older Android P?
but anyway i theoretically had all the files to give it a try.
But i had to flash Stock Rom for many times because i wanted to start from the same starting point so i could find out what step causes the problem
and also to "reset" the boot.img if i had used a patched one
So this was my loop i did everytime to get from some sort of a corrupt status back to "my starting point" = this means unlocked Bootloader, Stock Rom V11.0.3 and recovery installed
[ beginning of loop
Enter Fastboot mode (Vol-Down & Power)
Install Stock Rom "pine_global_images_V11.0.3.0.QCMMIXM_20200717.0000.00_10.0_global" from c .mi .com homepage by using the software "MiFlash 2020.3.14.0"
(if you use MiFlash for the first time go to Driver --> install & wait for weird message.)
(it's important to use the V11.0.3.0. if you want to run the "64-bit Base Package For GSI Redmi 7A")
if your bootloader is unlocked at this moment choose "clean all" at the bottom of MiFlash instead of "clean all and lock".
("clean all" always ends with the error "error: Not catch checkpoint (\$fastboot -s .*lock), flash is not done" but you can ignore this one)
After install Stock Rom is finished let the device boot to system
if you already have a unlocked bootloader and you used "clean all" option you can now shut down the device and then enter Fastboot mode (Vol-Down & Power)
if you used "clean all and lock" with a previous unlocked bootloader you can quickly unlock it again by entering Fastboot mode and using the "Mi Unlock" software for Windows.
if your bootloader was never unlocked before you now have to do the complete process:
enable the developer options, go to "Mi unlock status" and register/LOGIN ON YOUR DEVICE into Mi-Account, install "Mi Unlock" software on PC and then you can unlock it.
anyways, if your bootloader is unlocked - shut down the device and then enter Fastboot mode (Vol-Down & Power)
[not flashing boot.img, already mentioned why not ]
use fastboot to flash vbmeta.img
vbmeta file
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use fastboot to flash recovery.img
TWRP recovery
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
] end of loop -> my starting point to testing different settings...
go to recovery by holding Vol-Up & Power
Wipe Dalvik / ART cache, System, Data, Cache.
Format Data > Yes
Do not wipe Internal Storage!
copy the following files to the devices sdcard:
Base (11.0.3 Q FW) - fw_vendor_pine_64bit-rel_11.0.3MI.zip File from download section
"lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN.img" (thats the one i've used but any arm64 GSI of your choice should work)
link in Download section at: https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Permissiver v5:
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
FM Radio fix: [EDIT: dont use this because LOS bootscreen will stuck in a flickering loop]
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use FM-Radio_(GSI).zip instead
https://forum.xda-developers.com/attachment.php?attachmentid=4937895&d=1580288989
worked for me, thanks @dmitrypershin2015
Flash fw_vendor_pine_64bit-rel_11.0.3MI.zip aka "Base (11.0.3 Q FW)"
Wipe system
Flash any arm64 GSI of your choice to system image
Reboot to Recovery
Flash Magisk (optional) (not tested here)
Flash Permissiver v5
Flash GApps (optional) (not tested here)
If you get 'insufficient space' error, first resize System partition.
Flash FM-Radio_(GSI).zip
Reboot system and enjoy.
I found out that the FM Radio fix doesn't work here, if you skip it LOS boots perfectly
Somewhere in the Forum there is a link to Permissiver v4 instead of v5, cant say if v4 works fine but v5 does
Click to expand...
Click to collapse
Whats the FM radio GSI zip for?
List of GSIs I've tried on 11.0.3 64 bit
Boots:
Havoc OS (Camera and Screenrecording bug)
Bliss Q (Camera and Weird cutted corners)
Bootleggers (Camera, Weird cutted corners and Brightness cant adjust)
Evolution X (Camera and Brightness cant adjust)
LOS 17 (Camera)
Dont boot:
N/A
Anyone here have a fix for camera, Brightness, Screenrecording and weird cut corners?
regularfanb0y said:
Whats the FM radio GSI zip for?
Click to expand...
Click to collapse
If i boot LOS 17 without the FM radio GSI zip the default FM Radio App which should be preinstalled isn't. flashing the zip fixed that.
regularfanb0y said:
Anyone here have a fix for camera, Brightness, Screenrecording and weird cut corners?
Click to expand...
Click to collapse
All i can say is that i tested Camera, Weird cutted corners and Brightness and Screenrecording on LOS 17 based on 11.0.3 64 bit . Everything works so far
PS: Can you please edit your quote so only the lines you refer to getting repeated? thx
does it work with the feature ： wireless fm radio？
so you can play sky children of light with this or games 64 bit based?
mYXiao said:
I had some troubles getting this running, but finally i made it
If this GSI stuff is also new to you like it is to me:
When working with GSI it's important to understand that the version which is currently running on your device, lets say V10.2.5 for example,
has the same version of your patched boot image (actually the boot image is build to fit for the currently running version i guess)
In this Thread the Base (11.0.3 Q FW) must have the same Version as the currently running version.
At the beginning i didn't know how this should work out because in all the other GSI Rom guides there is a patched boot image file in use
but if you want to use this Base (11.0.3 Q FW) there is no V11.0.3 GLOBAL patched boot image file to use?, just russia.
(see https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305 link in download section)
but then i read somewhere that the boot img also/always is part of the stock image and then i saw that the actual stock image from c. mi. com homepage is V11.0.3.
the second thing that doesn't made sense to me was: does Base (11.0.3 Q FW) mean you only can run Android 10 on it and why are there "higher versions" like Base (11.0.7 P FW) for the older Android P?
but anyway i theoretically had all the files to give it a try.
But i had to flash Stock Rom for many times because i wanted to start from the same starting point so i could find out what step causes the problem
and also to "reset" the boot.img if i had used a patched one
So this was my loop i did everytime to get from some sort of a corrupt status back to "my starting point" = this means unlocked Bootloader, Stock Rom V11.0.3 and recovery installed
[ beginning of loop
Enter Fastboot mode (Vol-Down & Power)
Install Stock Rom "pine_global_images_V11.0.3.0.QCMMIXM_20200717.0000.00_10.0_global" from c .mi .com homepage by using the software "MiFlash 2020.3.14.0"
(if you use MiFlash for the first time go to Driver --> install & wait for weird message.)
(it's important to use the V11.0.3.0. if you want to run the "64-bit Base Package For GSI Redmi 7A")
if your bootloader is unlocked at this moment choose "clean all" at the bottom of MiFlash instead of "clean all and lock".
("clean all" always ends with the error "error: Not catch checkpoint (\$fastboot -s .*lock), flash is not done" but you can ignore this one)
After install Stock Rom is finished let the device boot to system
if you already have a unlocked bootloader and you used "clean all" option you can now shut down the device and then enter Fastboot mode (Vol-Down & Power)
if you used "clean all and lock" with a previous unlocked bootloader you can quickly unlock it again by entering Fastboot mode and using the "Mi Unlock" software for Windows.
if your bootloader was never unlocked before you now have to do the complete process:
enable the developer options, go to "Mi unlock status" and register/LOGIN ON YOUR DEVICE into Mi-Account, install "Mi Unlock" software on PC and then you can unlock it.
anyways, if your bootloader is unlocked - shut down the device and then enter Fastboot mode (Vol-Down & Power)
[not flashing boot.img, already mentioned why not ]
use fastboot to flash vbmeta.img
vbmeta file
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use fastboot to flash recovery.img
TWRP recovery
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305] end of loop -> my starting point to testing different settings...
go to recovery by holding Vol-Up & Power
Wipe Dalvik / ART cache, System, Data, Cache.
Format Data > Yes
Do not wipe Internal Storage!
copy the following files to the devices sdcard:
Base (11.0.3 Q FW) - fw_vendor_pine_64bit-rel_11.0.3MI.zip File from download section
"lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN.img" (thats the one i've used but any arm64 GSI of your choice should work)
link in Download section at: https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Permissiver v5:
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
FM Radio fix: [EDIT: dont use this because LOS bootscreen will stuck in a flickering loop]
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use FM-Radio_(GSI).zip instead
https://forum.xda-developers.com/attachment.php?attachmentid=4937895&d=1580288989
worked for me, thanks @dmitrypershin2015
Flash fw_vendor_pine_64bit-rel_11.0.3MI.zip aka "Base (11.0.3 Q FW)"
Wipe system
Flash any arm64 GSI of your choice to system image
Reboot to Recovery
Flash Magisk (optional) (not tested here)
Flash Permissiver v5
Flash GApps (optional) (not tested here)
If you get 'insufficient space' error, first resize System partition.
Flash FM-Radio_(GSI).zip
Reboot system and enjoy.
I found out that the FM Radio fix doesn't work here, if you skip it LOS boots perfectly
Somewhere in the Forum there is a link to Permissiver v4 instead of v5, cant say if v4 works fine but v5 does
Click to expand...
Click to collapse
I have two redmi 7a phones, and I tried both. The first one worked the first try, but the second one does not let me install the gapps, I get error code 70 don't have enough space, I tried to resize system but I get an error and if I try again it works but when starting the phone it stuck in the logo (I already installed FM radio gsi). I don't understand why that happens
Jak08 said:
so you can play sky children of light with this or games 64 bit based?
Click to expand...
Click to collapse
I would also wish to know this, will this allow arm64 apps to run? this is a new one to me ? didn't know this was even possible
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
EDIT: NO FORMAT DATA REQUIRED BUT BACKUP ALWAYS RECOMMENDED
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
How to:
STEP 1
- Backup Always Recommended
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img (WARNING: if not successful cause bootloop)
fastboot flash boot magisk_patched.img
fastboot reboot
- Open Magisk Manager (Internet Connection required for download some magisk files and will automatically reboot in 5 minutes)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES
Tested on MIUI 11.0.3.0-11.0.6.0 GLOBAL ID, 11.0.7.0-11.0.8.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Q&A
Q: How to completely uninstall magisk?
A: Flash miui fastboot rom via Mi Flash or Flash full recovery rom
Q: Bootloop?
A: Disable vbmeta not successful, use adb fastboot in my comment or flash stock boot.img
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
i can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity'
AstroKkngTool said:
i can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity'
Click to expand...
Click to collapse
download my attachment adb_fastboot.zip
extract & copy folder to C:/ then try again
How did you unlock the bootloader on global rom?
Or you have non NFC version of Redmi 9?
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img
fastboot erase userdata
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
It WORKS. I'm on MIUI 11.0.4.0 GLOBAL. Huge Thanks :fingers-crossed:
Thanks it works my phone .
I am on miui 11.0.2 v. (Redmi 9 prime)
There is no update sill now,
There no Firmware 11.0.2 what I am using
What can I do further????
Can I flash the latest Global Rom on my phone using Fastboot mode????
Why Аndroid is 10 oreo? (pictured)
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img
fastboot erase userdata
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
Why Аndroid is 10 oreo? (pictured)
Mantipallykrishna said:
I am on miui 11.0.2 v. (Redmi 9 prime)
There is no update sill now,
There no Firmware 11.0.2 what I am using
What can I do further????
Can I flash the latest Global Rom on my phone using Fastboot mode????
Click to expand...
Click to collapse
Are you from India? I wanted to ask, is a model with NFC officially sold in your country?
iYowo said:
Why Аndroid is 10 oreo? (pictured)
Click to expand...
Click to collapse
Good catch, I missed this information when I had a look!
It seems to be a issue with the app he's using!
DevCheck by Flar2 (who does the ElementalX kernel for years on many different devices) reports the android version correctly - and I personally trust rather Flar2's App then anything else!
Should be just a bug in the App that OP uses...
Edit: also selinux appears to be disabled in OPs screenshot, I wonder if he did this on purpose or what the deal is (another App bug?) because usually Magisk patches selinux but doesn't disable it, at least from my experience...
Sent from my galahad using XDA Labs
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
Any bootloop Risk? Please helpme, i am noob
Modelo M2004J19G no NFC
MIUI GLOBAL 11.0.4 STABLE QJCMIXM
Android 10
Sam Nakamura said:
Good catch, I missed this information when I had a look!
It seems to be a issue with the app he's using!
DevCheck by Flar2 (who does the ElementalX kernel for years on many different devices) reports the android version correctly - and I personally trust rather Flar2's App then anything else!
Should be just a bug in the App that OP uses...
Edit: also selinux appears to be disabled in OPs screenshot, I wonder if he did this on purpose or what the deal is (another App bug?) because usually Magisk patches selinux but doesn't disable it, at least from my experience...
Click to expand...
Click to collapse
idk sir, i just download root check app & open it after root successfully ??
KevinTM93 said:
Any bootloop Risk? Please helpme, i am noob
Modelo M2004J19G no NFC
MIUI GLOBAL 11.0.4 STABLE QJCMIXM
Android 10
Click to expand...
Click to collapse
Yes, definitely bootloop risk!
Make sure you understand the instructions in this post and to have the stock kernel stored close to you, in theory you should be easy able to restore the device from bootlooping by flashing the unmodified stock kernel...
And you'll need to unlock the bootloader which will factory reset the device, so before playing around you'll probably want to backup your important files and do the unlocking process, which takes a while on xiaomi phones
Sent from my galahad using XDA Labs
Deleted...already explained
Sam Nakamura said:
Yes, definitely bootloop risk!
Make sure you understand the instructions in this post and to have the stock kernel stored close to you, in theory you should be easy able to restore the device from bootlooping by flashing the unmodified stock kernel...
And you'll need to unlock the bootloader which will factory reset the device, so before playing around you'll probably want to backup your important files and do the unlocking process, which takes a while on xiaomi phones
Click to expand...
Click to collapse
Thank you very much, I understand that there is always a risk of bootloop, but I wanted to know if with those specifications I could perform this method ... another question, where can I download the specific stock rom for my device? I appreciate your help, un MI Page i found MIUI global 11.0.5.0 QJCMIXM, and my device is MIUI global 11.0.4.0 QJCMIXM...
KevinTM93 said:
Thank you very much, I understand that there is always a risk of bootloop, but I wanted to know if with those specifications I could perform this method ... another question, where can I download the specific stock rom for my device? I appreciate your help, un MI Page i found MIUI global 11.0.5.0 QJCMIXM, and my device is MIUI global 11.0.4.0 QJCMIXM...
Click to expand...
Click to collapse
you can find the lancelot miui full recovery rom in here :
https://xiaomifirmwareupdater.com/miui/lancelot/
11.0.5.0 > global stable beta
11.0.4.0 > global stable
if you want 11.0.5.0 so update your rom first,,, if not, you can download miui 11.0.4.0 rom there and ready to patch boot.img...
I can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity
Zeppelin_Elevation said:
Are you from India? I wanted to ask, is a model with NFC officially sold in your country?
Click to expand...
Click to collapse
There is no NFC in Redmi 9 Prime Lancelot (INDIA)
ممكن اتواصل معاك فديو شرح
Hamoo kamshto said:
ممكن اتواصل معاك فديو شر [\QUOTE]
PLEASE use english as required by the forum rules, so everyone can understand and contribute, also you'll get help much faster!
Sent from my Google Pixel 3 XL
Click to expand...
Click to collapse
Hello all, I've been trying to install /e/ OS GSI on my Redmi Note 11S, but that didn't go exactly well. Luckily, I managed to fix it. So before I brick this thing again, How should I install a GSI properly without bricking, and which GSI would you recommend? I am looking for something more privacy oriented. Thank you in advance
[TOOL][AUTOINSTALLER][GSI]SMINORI GSI AUTO INSTALLER FOCO M4 PRO
After i'm search many tutorial and thread about installing clean and optimal GSI and take a lot of time. So, i decided to make batch auto installer for GSI ROM for help u guys, this is easy way for installing gsi rom WITH JUST PRESS ENTER:sneaky...
forum.xda-developers.com
nothing other than that. thats it.
when it goes wrong u can easly flash full stock with miflshtool
lurchiii said:
[TOOL][AUTOINSTALLER][GSI]SMINORI GSI AUTO INSTALLER FOCO M4 PRO
After i'm search many tutorial and thread about installing clean and optimal GSI and take a lot of time. So, i decided to make batch auto installer for GSI ROM for help u guys, this is easy way for installing gsi rom WITH JUST PRESS ENTER:sneaky...
forum.xda-developers.com
nothing other than that. thats it.
when it goes wrong u can easly flash full stock with miflshtool
Click to expand...
Click to collapse
Thank you
Is there some sort of Linux alternative?
And which GSI would you recommend?
kritomas said:
Thank you
Is there some sort of Linux alternative?
And which GSI would you recommend?
Click to expand...
Click to collapse
I have tried Evolution X A13 & Pixel Experience Plus A13 & CRDROID A12 and on all of them I had issues with Wifi, bluetooth, thethering - non of them worked so I gave up and went back to miui
1. adb reboot bootloader
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
3. fastboot reboot fastboot (because gsi must be flashed in fastbootd )
4. fastboot getvar is-userspace
5. fastboot erase system
6. fastboot delete-logical-partition product_a
7. fastboot flash system YOUR_GSI_ROM.img (system.img)
8. fastboot reboot recovery
9. (in recovery) wipe data
10. (in recovery) reboot to system
i flashed yesterday Arrow OS lite A12 it has several fixes for most common problems on board and it worked very well and smooth.
on telegram you can found a magiskmodul fix for auto-variable Hz and a magisk modul for disable hw-overlays consistent. (cauz after reboot it turn back on automaticly)
BUT gaming performance is horrible and good kernel tweaks are over my level
Had someone tried any of these GSI images without having wifi / bluetooth issues?
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
..... flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
Click to expand...
Click to collapse
Where should I take the vbmeta.img for my phone?
shady9090 said:
Where should I take the vbmeta.img for my phone?
Click to expand...
Click to collapse
Download the Fastboot Firmware that match the Firmware on your phone from here: https://forum.xda-developers.com/t/...dmi-note-11s-4g-poco-m4-pro-4g-fleur.4428655/
Extract it with the file and in the images folder is the vbmeta.
I have this weird issue on every GSIs where the status bar isn't aligned with the camera. Does anyone know how I can fix that?
Dio Off-Brando said:
I have this weird issue on every GSIs where the status bar isn't aligned with the camera. Does anyone know how I can fix that?
Click to expand...
Click to collapse
In the Developer Options is a fix for that. But idk how the exactly Name was for it.
lurchiii said:
1. adb reboot bootloader
2. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img (take the vbmeta.img file from your current firmware)
3. fastboot reboot fastboot (because gsi must be flashed in fastbootd )
4. fastboot getvar is-userspace
5. fastboot erase system
6. fastboot delete-logical-partition product_a
7. fastboot flash system YOUR_GSI_ROM.img (system.img)
8. fastboot reboot recovery
9. (in recovery) wipe data
10. (in recovery) reboot to system
i flashed yesterday Arrow OS lite A12 it has several fixes for most common problems on board and it worked very well and smooth.
on telegram you can found a magiskmodul fix for auto-variable Hz and a magisk modul for disable hw-overlays consistent. (cauz after reboot it turn back on automaticly)
BUT gaming performance is horrible and good kernel tweaks are over my level
Click to expand...
Click to collapse
So from Linux with platform-tool installed and by giving the mentioned commands I can flash Gsi rom Pixel Experience right???
fastboot delete-logical-partition product_a??? no b???
yes you can flash it from windows or from linux. they are the same commands..
and yes only a
GitHub - VegaBobo/DSU-Sideloader: A simple app made to help users easily install GSIs via DSU's Android feature.
A simple app made to help users easily install GSIs via DSU's Android feature. - GitHub - VegaBobo/DSU-Sideloader: A simple app made to help users easily install GSIs via DSU's Android feat...
github.com
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
First time installation:
1. Disable AVB with fastboot (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
2. Flash PBRP with fastboot (fastboot flash recovery recovery.img)
3. Reboot to Recovery
4. Wipe Data/Cache
5. Flash the ROM (Could need to unmount system before if it's mounted), then flash GAPPS
6. Format data
7. Reboot to System
Update installation:
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM and GAPPS
4. Reboot to System
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/realme-kernel-opensource/realme6-kernel-source
Device: https://github.com/TheCloverly/device_realme_RMX2001
Download:
ROM: https://crdroid.net/RM6785
Changelog: https://raw.githubusercontent.com/c..._vendor_crDroidOTA/11.0/changelog_RMX2001.txt
Known issues:
* Night light flickers
Visit official website @ crDroid.net
crDroid RMX2001 Telegram
crDroid Community Telegram
Donate to help our team pay server costs
@TheCloverly
Greetings. Just a friendly FYI, there is no "13" rom version available for the device you listed, and the 7 and 11 versions are no longer available in your DL link.
If you would please fix this ASAP so as this thread is not closed for being a "placeholder," we would be most appreciative.
-Regards: Badger50
Badger50 said:
@TheCloverly
Greetings. Just a friendly FYI, there is no "13" rom version available for the device you listed, and the 7 and 11 versions are no longer available in your DL link.
If you would please fix this ASAP so as this thread is not closed for being a "placeholder," we would be most appreciative.
-Regards: Badger50
Click to expand...
Click to collapse
Thankyou FYI, I have fixed it.
battery is stable?
TheCloverly said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
First time installation:
1. Disable AVB with fastboot (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
2. Flash PBRP with fastboot (fastboot flash recovery recovery.img)
3. Reboot to Recovery
4. Wipe Data/Cache
5. Flash the ROM (Could need to unmount system before if it's mounted), then flash GAPPS
6. Format data
7. Reboot to System
Update installation:
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM and GAPPS
4. Reboot to System
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/realme-kernel-opensource/realme6-kernel-source
Device: https://github.com/TheCloverly/device_realme_RMX2001
Download:
ROM: https://crdroid.net/RM6785
Changelog: https://raw.githubusercontent.com/c..._vendor_crDroidOTA/11.0/changelog_RMX2001.txt
Known issues:
* Night light flickers
Visit official website @ crDroid.net
crDroid RMX2001 Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Click to expand...
Click to collapse
Device RMX2151
Can Android 13 based ROMs for rm6785(rmx2151 in this case) be flashed from RUI2 or RUI1 ?
which custom recovery do you suggest ?
When I flash android 13 ROMs on rmx2151, they don't work, phone reboots at booting animation of the custom rom
I installed this ROM successfully but when I tried to go into my custom recovery "Orangefox"
The device stands on the logo and restarts itself and keeps the device logo
Please any help on this sir
Does this ROM work for Realme 6S (RMX2002)?
ahmedyuu said:
I installed this ROM successfully but when I tried to go into my custom recovery "Orangefox"
The device stands on the logo and restarts itself and keeps the device logo
Please any help on this sir
Click to expand...
Click to collapse
Same problem here, a bump for help!
ahmedyuu said:
I installed this ROM successfully but when I tried to go into my custom recovery "Orangefox"
The device stands on the logo and restarts itself and keeps the device logo
Please any help on this sir
Click to expand...
Click to collapse
I had the same problem. To fix the bootloop I followed this tutorial:
On my PC I had to replace the command "python --version" with "py --version" and later instead of "python -m pip pyusb pyserial json5" I had to run "py -m pip pyusb pyserial json5"
After that I replaced the stock software.
Then enable USB debugging, then do the following:
adb devices
adb reboot bootloader
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery TWRP.img
fastboot reboot recovery
You can find vbmeta.img either in the stock firmware or in the rom zip package.
When you are in recovery mode you have to flash Magisk.zip to prevent stock rom from replacing the recovery. After that reboot to recovery, then you can flash the rom.