I own Nothing of the contents i will provide below but i wanted to share with you This Amazing ROM that became Available to Our Device thanks to Iceows, DarkJoker360, Hamido and DotOS Team that made the GSI available. So make Sure to give proper Credits whenever you Publish this Method.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements :
- Unlocked Bootloader
- Darkjoker360's Twrp prague A11 edition : LINK
- Stock Emui Rom version below 400 for Rne-L21( For other variants i haven't tested yet which version you must have, but ofc don't be on the latest ones ).
- Patience.
- Follow my Steps.
What's working :
- Everything if you install all the fixes.
What's not working :
- Something probably you only have found about.
To Begin i recommend you download :
1- dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img.xz (none of the A-only builds worked for us so don't waste your time) and must be vndklite (IMPORTANT) : LINK
2- all the necessary 6 fixes from Iceows Sourceforge in this LINK
3- Hamidos Patch 1 and 2 to convert ab to a only. LINK I will add the patch 1 and 2 in the attachements.
Also your data have to be decrypted before installing this Rom (ignore this step if you have done this before), to do so download the decrypt zip file from this link and put it in your microSD directory : LINK
- Extract dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img.xz to your microsSD so you will obtain : dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img
- Put The 6 fixes Zips + hamido Patch 1 and 2 in your sdcard (Fixes exist in Iceows Sourceforge in the link provided previously).
So now you have these files in your MicroSD :
* dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img.
* Huawei-Decrypt-Emui_8.zip
* MakeHi6250-Iceows-v0.2-signed.zip
* AGPS-FIX-AltairVendor-v3.3-signed.zip
* NFC-FIX-Altair-v1.6-signed.zip
* DisplayEngine-FIX-Altair-v0.3-signed.zip
* LibAptx-FIX-Altair-v0.1-signed.zip
* Media-FIX-Altair-v0.1-signed.zip
* Patch1.zip
* Patch2.zip
Now Follow these easy Steps :
=============================
1) Format Data
Reboot to recovery TWRP and perform these steps
Code:
- Wipe > Format Data
then
Code:
- Reboot > Recovery
- Wipe Data
============================
2) Now in TWRP again, perform these steps:
Code:
- Wipe > Advanced Wipe :
Select only these partitions
[x] Dalvik / ART Cache
[x] Cache
[x] Data
[x] System
Swipe to format
============================
3) Install EMUI 8 decrypt file (not needed if you are already decrypted your data, move to step 4)
I previously put the zip file on my MicroSD, so:
Code:
- Install > Huawei-Decrypt-Emui_8.zip
Code:
Reboot > Recovery
============================
4) Install the system
Still in TWRP do:
Code:
- Reboot > Recovery
- Install > Install Image > Pick from your Micro SDcard "dotOS-R-v5.2-arm64-ab-vndklite-GAPPS-OFFICIAL.img" > flash it as system image (Warning not System only).
- Install zip > Flash Patch 1 then flash Patch 2
- Install zip > Flash the 6 fixes One by One.
============================
5) Resize the file system
After flashing the image reboot in TWRP by pressing back until you get to TWRP main screen then
Code :
- Reboot > Recovery
once rebooted again to twrp
- Wipe > Advanced Wipe > pick System Partition > Repair or change file system > Resize File System
============================
Code:
Reboot > System
===========================
6) ENJOY!
I followed your guide and managed to finally install a custom rom for my phone after years, it works well and I really thank you for sharing this! but i'm not sure how to root it. i tried to install magisk and supersu through TWRP but neither worked, I dont know what i did wrong.
Mastershaff said:
i tried to install magisk and supersu through TWRP but neither worked, I dont know what i did wrong.
Click to expand...
Click to collapse
Try the following:
1. Magisk root - first flash in TWRP M-Mount-Fix-11 , reboot into TWRP and flash Magisk.zip .
2. Superuser root - in TWRP flash
Phh-superuser-aonly , and install superuser appk download .
Maybe it will help you.
-Alf- said:
Try the following:
1. Magisk root - first flash in TWRP M-Mount-Fix-11 , reboot into TWRP and flash Magisk.zip .
2. Superuser root - in TWRP flash
Phh-superuser-aonly , and install superuser appk download .
Maybe it will help you.
Click to expand...
Click to collapse
Installing Superuser root worked. Thank you!
Mastershaff said:
Installing Superuser root worked. Thank you!
Click to expand...
Click to collapse
No problem.
Can you please suggest me which gapps works perfectly?? I’ve installed Opengapps nano but it doesn’t seem perfect to me because Chrome is getting crashed everytime I visit a website. Some apps can’t use location even though it’s allowed to use the location, like Chrome, Foodpanda.
Google Map works fine.
Messenger bubble isn’t working.
Also can you help me attaching the file “Media-FIX-Altair-v0.1-signed.zip” here?? The download link on sourceforge isn’t working.
Salekin_Limon said:
which
Click to expand...
Click to collapse
On dotOS try MindTheGapps, more stable when they launched. OpenGapps had some issues.
Or NikGapps basic. (you have to flash gapps before booting up the ROM!)
Salekin_Limon said:
Chrome is getting crashed
Click to expand...
Click to collapse
Try to update System Webview. Also you can try Chrome Beta :
guide
P.S.: In general, dotOS is the least suitable treble ROM for kirin devices, imo.
-Alf- said:
On dotOS try MindTheGapps, more stable when they launched
Click to expand...
Click to collapse
I tried, it was not installed saying that this package was for android 11 and it was not compatible with my android sdk, even though the package was MindTheGapps-11.0.0-arm64
-Alf- said:
Try to update System Webview. Also you can try Chrome Beta :
guide
Click to expand...
Click to collapse
Updated the System Webview, and followed the instructions after installing Chrome beta. It didn’t work for me. Even all the browsers (EDGE, Brave Browser) I installed, had the same issue except the system installed browser.
Flash dotOS gapps variant, it should work, imo...
-Alf- said:
Flash dotOS gapps variant, it should work, imo...
Click to expand...
Click to collapse
Many thanks. Everything is working really fine except for some apps.
Google Chrome issue remained unsolved.
Salekin_Limon said:
Google Chrome issue remained unsolved
Click to expand...
Click to collapse
Try Thor, Via or Dolphin
https://forum.xda-developers.com/t/...plus-a11-gsi-unofficial.4298551/post-86104931
Anyone manage to get VoLTE working ?
And there are 3 more files showing up in the sourceforge download link so shall I install those as well ?
The first file says 0-BigPatch-Altair-v0.1-signed.zip
And second one is 7 - VoLTE-FIX-A11-Altair-V1.4-signed.zip
The 3rd is VoLTE-FIX-A11-NoT-V1.5-signed.zip
Razr1804 said:
VoLTE working
Click to expand...
Click to collapse
On emui 8 try the following:
https://forum.xda-developers.com/t/...-0-9-with-working-volte.4356215/post-85877725
-Alf- said:
On emui 8 try the following:
https://forum.xda-developers.com/t/...-0-9-with-working-volte.4356215/post-85877725
Click to expand...
Click to collapse
I tried this method all day and I managed to boot it up but no luck with volte, The call seems to dial (and reaches the other end) but the calling screen shows that the 'call is ended', I even tried applying magisk fix as well as the zip provided for volte still no luck.
One more thing the TWRP seems to be stuck on Darkjoker360'sTWRP Prague A11 edition.
I tried it with Huawei Mate 10 Lite RNE-L01. Everything works fine but NFC doesn't work. Is there any solution?
teknolojiazmani said:
I tried it with Huawei Mate 10 Lite RNE-L01. Everything works fine but NFC doesn't work. Is there any solution?
Click to expand...
Click to collapse
NFC...Mate 10 lite...
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Huawei Mate 8 (NXT)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Code:
[COLOR="red"][B]WARNING:[/B] since 3.1.0-2 update we've enabled image flashing to special partitions -
not just /recovery or /boot partition.
That means your device could be bricked in a few seconds if you do not pay attention
or don't know what you're doing. (Noobs please stay away out of this section!)[/COLOR]
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-next.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official SuperSU (not just 2.82+)[/U][/B]
1. Ensure you are running stock kernel from b380+
2. Tick the option "Keep vendor partition mounted" inside OpenKirin Settings
3. download and install [URL="www.supersu.com/download"]official SuperSU[/URL]
4. Enjoy!
[B][U]2. Custom SuperSU[/U][/B]
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device (except kirin 960 based) running emui 5.x without loop support.
[B][U]3. Magisk[/U][/B]
1. ensure you are running a kernel from b380 or later
2. flash magisk
3. enjoy root & safetynet (read note)
[B][COLOR="red"]NOTE:[/COLOR][/B] Magisk Hide is a known problem on Huawei/Honor devices.
Make sure you are not rebooting/turning off your device with Magisk Hide enabled!
You may face a broken fingerprint scanner, do not worry,
simply disable magisk hide and reboot - fps works again!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_next/releases/download/3.1.1-1/twrp-3.1.1-1-next.img"][U]download twrp-3.1.1-1-next.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 10. June 2017
Q: which Mate 8 models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
yes, you can! (have a look at the instructions in FAQ)
Q: Can i install LOS or AOSP based roms with this TWRP?
yes, you can! (please follow the installing procedure in the corresponding rom thread)
Q: Can i install Magisk?
A: Every ROM based upon b380+ kernel should now include proper loop support.
Since 3.1.0-3 you are able to flash Magisk through TWRP (recovery kernel has been updated)
Q: Does official SuperSU work?
A: Yes, even though chainfire included a fix in his upcomming version,
you can use every version of it, just check the "Rooting Instructions" section.
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with forceencrypt disabled
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
[TWRP][3.1.1-0][MATE 8][DECRYPTION SUPPORT], Tool/Utility for the Huawei Mate 8
Contributors
OldDroid, XePeleato, surdu_petru
Source Code: http://ttps://github.com/OpenKirin
Version Information
Status: Stable
Created 2017-04-08
Last Updated 2017-06-11
Reserved
TWRP 3.1.0-1 next for encrypted/ decrypted data
This post has been deplaced here. I'll remove it when the TWRP above will work for encrypted/ decrypted data.
Thanks for comprehension!
I'm glad, that we can help the Mate 8 community
Thanks for distribution ...
The themes are here now.
Thanks!
Thak you very much.
I have your "Boot_Insecure_B560_Fix-adb_dm-verity.img" installed. Do you recomend to go back to stock boot and use this TWRP for any flashing? Or shoud i stay in a insecure boot?
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Us there 2 differnt versions of this twrp 1 for decripted data and 1 for formated data ??
jac10000 said:
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Click to expand...
Click to collapse
We can see what we can do with the both. A merger is perhaps possible?!
Edit:
Already it works with untouched boot.
With no formatted datas, it seems to me.
jac10000 said:
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Click to expand...
Click to collapse
Thank you very much for your test
As I can see it's working for decrypt unmodified /data if mount point to /dm-0 ...
franzyroy said:
We can see what we can do with the both. A merger is perhaps possible?!
Edit:
Already it works with untouched boot.
With no formatted datas, it seems to me.
Click to expand...
Click to collapse
I make a new TWRP, but should be tested in the same conditions like @jac10000 !
Also, please @jac10000, if you can test my new release to see if it decrypt /data , thanks !
EDIT :
Please, @franzyroy - you should test TWRP with unmodified data, so if your data was modified by wipe or format, you should restore device to Stock Huawei Firmware N by /dload/UPDATE.APP method . Thanks !
Downloads : twrp-3.1.0-next-v2.img md5 : 7ee1833ea51bf3835efc23851ad9a011
surdu_petru said:
Thank you very much for your test
As I can see it's working for decrypt unmodified /data if mount point to /dm-0 ...
I make a new TWRP, but should be tested in the same conditions like @jac10000 !
Also, please @jac10000, if you can test my new release to see if it decrypt /data , thanks !
EDIT :
Please, @franzyroy - you should test TWRP with unmodified data, so if your data was modified by wipe or format, you should restore device to Stock Huawei Firmware N by /dload/UPDATE.APP method . Thanks !
Downloads :twrp-3.1.0-next-v2.imgmd5 : 7ee1833ea51bf3835efc23851ad9a011
Click to expand...
Click to collapse
It seemed to me that dexz had tested it like that.
If I can test it, I'll do it. In the week, it's not really possible for me. @dexz should can do it.
jac10000 said:
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Click to expand...
Click to collapse
With the TWRP here, the root works too.
surdu_petru said:
Thank you very much for your test
As I can see it's working for decrypt unmodified /data if mount point to /dm-0 ...
I make a new TWRP, but should be tested in the same conditions like @jac10000 !
Also, please @jac10000, if you can test my new release to see if it decrypt /data , thanks !
EDIT :
Please, @franzyroy - you should test TWRP with unmodified data, so if your data was modified by wipe or format, you should restore device to Stock Huawei Firmware N by /dload/UPDATE.APP method . Thanks !
Downloads :twrp-3.1.0-next-v2.imgmd5 : 7ee1833ea51bf3835efc23851ad9a011
Click to expand...
Click to collapse
The one I tested and working yesterday was with /dm-0 before you posted another version.
Anyway twrp-3.1.0-next-v2.img is working fine and decrypted. Using adb shell mount. it show /data is on /dev/block/dm-5 the same with the one I have tested before.
Edit : I got force reboot using twrp-3.1.0-next-v2 after 5 seconds
Edit2 : It's only stop force reboot when I got the "Unmodified System Partition" screen.
Edit3 : I see force reboot stop if there's no changes on twrp setting (example time zone, language & etc)
@surdu_petru
Yes I just test it this twrp-3.1.0-next-v2.img and like @dezx I have force reboot when I use TWRP File Manager
dexz said:
The one I tested and working yesterday was with /dm-0 before you posted another version.
Anyway twrp-3.1.0-next-v2.img is working fine and decrypted. Using adb shell mount. it show /data is on /dev/block/dm-5 the same with the one I have tested before.
Edit : I got force reboot using twrp-3.1.0-next-v2 after 5 seconds
Edit2 : It's only stop force reboot when I got the "Unmodified System Partition" screen.
Edit3 : I see force reboot stop if there's no changes on twrp setting (example time zone, language & etc)
Click to expand...
Click to collapse
jac10000 said:
@surdu_petru
Yes I just test it this twrp-3.1.0-next-v2.img and like @dezx I have force reboot when I use TWRP File Manager
Click to expand...
Click to collapse
Perhaps you should make that and send the console.recovery.log to @surdu_petru or @OldDroid because if they have made the TWRP with mine, it's perhaps the cause.
@surdu_petru
---->logs
Thanks guys for feedback
I'll upload a new version very soon, hope will fix reboot issues !
I say that because :
I have no issues with a prerooted boot
It's also with Decrypted data boot
I can install a zip without to see an error
I see the internal storage
I can also see the size, not 0 MB
Only thing which doesn't work fine, when I mount the data, it's unmounted in the 5 seconds.
surdu_petru said:
Thanks guys for feedback
I'll upload a new version very soon, hope will fix reboot issues !
Click to expand...
Click to collapse
Thank you. Looking forward to it.
Sorry I'm out of like bullet :laugh:
New Test Version 3 !
Downloads : twrp-3.1.0-next-v3.img md5 : d969789ee06d3d323a98d9f028e6f475
Thank you for the feedback
EXPERIMENTAL AND MOST LIKELY BROKEN
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Android "Q" is the upcoming ninth major version of the Android operating system. It was first announced by Google on March 2019, and the first developer preview was released on the same day. The second developer preview is expected to be released at the next Google I/O developer conference.
[more stable] Pixel: Ported from Pixel 2 firmware (walleye)
Generic: Ported from Google GSI with gapps
GET UPDATES FROM: https://t.me/androidqgsi
Requirements :
Treblized device with 8.1 or P vendor
Global Bugs :
VoLTE
Device specific Bugs :
...
Instructions :
for A-Only :
Install img into system partition
Flash permissiver_v2.zip or make your boot partition selinux permissive
Flash FixZygote.zip
Reboot
for AB :
Install img into system partition
Flash permissiver_v2.zip or make your boot partition selinux permissive
Reboot
Downloads :
Q Developer Preview
Notes :
Fix gapps: install google play services with "adb install"
if images didn't worked properly post your logs(logcat and console-ramoops) on telegram group i'll come for help : @androidqgsi
Logcat without PC: take /data/local/tmp/logs/log
Enable adb before boot using this command in TWRP:
Linux/mac :
Code:
adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
Win :
Code:
adb push C:\Users\<userName>\.android\adbkey.pub /data/misc/adb/adb_keys
Donate:
My paypal: https://www.paypal.me/erfanoabdi
Tested on:
give me logs if didn't worked, or donate me a device
Tested by myself:
Moto Z (A-only)
Moto X4 (AB)
Thanks
ENJOY!
[DEV-ONLY] Bug Fixing
NVM
Ah actually this is ridiculous to have bug fixing post here, and i hate my port, real P GSI shouldn't done like this. but anyway this is ported from closed source P and i can point in most popular fixable bugs here...
by looking into logs(adb logcat -b all) if we see :
1) library "libxxxxxxxxx.so" not found
fix of this error is very simple as you guys all know we just need to put needed lib from system image of base rom in https://github.com/erfanoabdi/P_sem...GSI_Patches/Vendor/P Blobs/POST-sGSI_1/vendor
and zip up "POST sGSI 1" with new libs
Feel free to make pull request new libs in github
2) cannot locate symbol :
for example LG RIL error was like this:
Code:
CANNOT LINK EXECUTABLE "/vendor/bin/hw/rild": cannot locate symbol "_ZN7android8hardware5radio4V1_08toStringENS2_22CdmaSmsWriteArgsStatusE" referenced by "/vendor/lib64/[email protected]"...
a) here we need to find where is unknown symbol located in 8.1 system image
so in terminal goto system/ and :
Code:
grep -r "_ZN7android8hardware5radio4V1_08toStringENS2_22CdmaSmsWriteArgsStatusE"
output in this case is :
Code:
Binary file lib/[email protected] matches
Binary file lib64/[email protected] matches
(here you may get long list of blobs, only find and grab needed ones)
b) now just copy libs to vendor and rename them
in this case i renamed [email protected] to [email protected]
***important rule keep string name same as original file only replace one letter (a->W)***
c) and sed renamed lib (in my case) :
Code:
sed -i "s/[email protected]/[email protected]/" "P_semiGSI/POST_sGSI_Patches/Vendor/P\ Blobs/POST-sGSI_1/vendor/lib/[email protected]"
sed -i "s/[email protected]/[email protected]/" "P_semiGSI/POST_sGSI_Patches/Vendor/P\ Blobs/POST-sGSI_1/vendor/lib64/[email protected]"
we're almost done here
d) now open POST-sGSI_2 and sed "referenced by" lib from error line in log
like this : https://github.com/erfanoabdi/P_sem...ETA-INF/com/google/android/update-binary#L154
e) and zip up "POST sGSI 1/2" with new libs
Feel free to make pull request new libs/hax in github
3) more...
NVM
WIKI : https://github.com/erfanoabdi/P_semiGSI/wiki
i hope we get a full GSI eventually one P is released, been waiting a while for this. at least now its semi done, it should be easier to create a full GSI for kirin (aka my H9) and MTK devices.
Hi, will it support Honor9?
I'm waiting for kirin chipset supported gsi
Dumpling- Needs mokee vendor
waiting support kirin960 and more?
Sent from my Honor V9 using XDA Labs
Jamie_oppo said:
Do you need to be a on a treble rom before flashing this?
Ive got a 5t (dumpling) and flashed the open beta which gave treble. Then flashed a normal custom rom. I tried all the zip at this point and no luck decrypted.
Click to expand...
Click to collapse
Same phone here, I flashed the rom, but it reboots every time to the bootloader...
ChristiaanP said:
Same phone here, I flashed the rom, but it reboots every time to the bootloader...
Click to expand...
Click to collapse
were u on a treble rom? Or normal non treble custom rom
Edit: apparently ob 11 vendor image is broken and mokee one boots.
Jamie_oppo said:
were u on a treble rom? Or normal non treble custom rom
Edit: apparently ob 11 vendor image is broken and mokee one boots
Click to expand...
Click to collapse
I was on OB 11
Awesome... btw Currently booting phones
Mi 5 (gemini)
Redmi 4 Prime (markw)
Redmi 4x (santoni)
Redmi 3s/3x/Prime (land)
Zuk Z2 Plus (z2_plus)
Redmi Note 4 sd (mido) (Tested on PE and Lineage-ex vendors)
Lenovo P2 (kunato)
Redmi Note 5 Pro (whyred) (With mokee vendor)
Mi 6 (sagit) LG V30 (h930)
Redmi 5 Plus (vince) (Tested with cardinal-aosp vendor)
Exynos S9+ (Unstable as **** as its not QCOM)
Redmi 4A (rolex) (crDroid Treble)
OnePlus 5/T (Only one user has reported it to work with proof though)(Mokee trees)
Bugs for land or all devices!
- half volte is working (only outgoing call and volume for jio left to fix)
- app opening time is extra
None volte users r really lucky
Also jio4gvoice app is not working
Update for DP5
THE MEGAPOST OF NOTES FOR THE P GSI HERE
Wiki page: https://github.com/erfanoabdi/P_semiGSI/wiki/OnePlus-5T and https://github.com/erfanoabdi/P_semiGSI/wiki/OnePlus-5 (Thanks to timocapa)
OnePlus 5/5T users, you MUST be decrypted in order to boot this GSI. This means flashing the noverity zip and formatting data. The link to the zip which I used to get it working is here: https://drive.google.com/file/d/1BtZKnNc2ooe9lcDd0JJ8eHzylA0StSm2/view The recovery I am using is the latest codeworkx recovery here: https://sourceforge.net/projects/ch....1-0-20180414-codeworkx-dumpling.img/download for dumpling and https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download for cheeseburger.
Some things to take into consideration before I followed these steps: I was using OB11 as my daily driver since it's release and I have always been encrypted.
This is exactly how I managed to get it booting on my 5T:
1) format data to remove encryption (I'm on OOS OB11 before doing this)
2) reboot recovery
3) factory reset
4) flash Mokee ROM (latest nightly)
5) flash noverity zip
6) reboot into OS
7) get past set up and reboot into TWRP
8) factory reset
9) install P GSI
10) mount vendor
11) install all the latest POST zips in the order of 1 to 3
12) reboot into OS
OPTIONAL: After you have booted into Android P and the lockscreen shows. You can reboot back into TWRP and install the latest BETA version of Mqgisk
Click to expand...
Click to collapse
Alternative instructions if you are getting kicked back into the recovery with the display log saying "RescueParty", do all of the above but replace step 11 with the steps below (Thanks to @jelousdogs for his method):
11) Flash POST Zip 1,2 (Dont flash zip 3 Yet)
12) Reboot to system (You will see the rom booting and reboot to recovery suddenly)
13) Flash POST zip 3 in recovery and reboot to system
If this STILL does not work, try this: After completing all of these steps, mount vendor partition in TWRP, then use the TWRP File Manager. Copy the build.prop file from the vendor partition to your internal storage (/sdcard) and move it to your PC via MTP in recovery. Add "persist.sys.disable_rescue=true" (without quotes) to the bottom of the build.prop file you have just copied to your PC. Save and transfer it back to your internal storage. Copy the build.prop from your internal storage to /vendor, replacing the original file. Press on the build.prop file in your /vendor partition and press "chmod". Remove all of the "0000" numbers in the text box and type "0600", then confirm the chmod. Reboot to the OS.
Click to expand...
Click to collapse
DIRTY FLASHING DP5 FROM DP4 (Thanks to timocapa):
1) reboot into TWRP and flash the DP5 GSI.
2) reboot into the OS.
Simple as that.
Click to expand...
Click to collapse
Notes:
- If you get kicked into recovery after trying to boot the GSI, look at TWRP's display log where flashable zip text are printed out and see if "init_user0_failed". This means you are encrypted and the GSI is having trouble with it. You must be decrypted as said above.
- Yes, this includes the new gesture pill nav bar. SETTINGS > SYSTEM > GESTURES > SWIPE UP ON HOME BUTTON (Your stock launcher must be working, i.e. not Force Closing, in order for this to work because the new overview app switcher is part of the stock Pixel Launcher).
- Weird software issues like apps not opening, random FCs, settings going blank? Try a factory reset in TWRP and reboot to see if it has fixed any problems!
Click to expand...
Click to collapse
Known bugs confirmed by a number of 5/t users:
- Potato quality camera, you can use GCam to remedy the problem but expect blue dots in HDRmode (OnePlus problem)
- Front facing camera can only be used in OOS camera (wait for official sources)
Click to expand...
Click to collapse
To get rid of the three persistent notifications:
1) install GMS update (https://www.apkmirror.com/apk/googl...2-8-72-100400-202717283-android-apk-download/)
2) Tap on the blue finishing setup notification and connect to wifi, then force close the pixel setup so it re-appears again
3) Go to settings > accounts > sign into google
4) Tap on the blue notification again and you should be able to go further than "pixel is finishing setup" page.
5) Force stop play store to remove the play store persistent notification
Click to expand...
Click to collapse
Hope this helps other OP5/5T users out there who are having trouble booting this.
Can someone tell me if boot this rom on mi mix2s It is able for treble rom i tryied to flash but doesnt boot.
Reserved for review
Boots
Could someone please tell me if this is a Pixel experience in terms of new nav gestures+copy/paste in multitasking overview?
unrealmac said:
Could someone please tell me if this is a Pixel experience in terms of new nav gestures+copy/paste in multitasking overview?
Click to expand...
Click to collapse
No
ZeroInfinity said:
OnePlus 5/5T users, you MUST be decrypted in order to boot this GSI. This means flashing the noverity zip and formatting data. The link to the zip which I used to get it working is here: https://drive.google.com/file/d/1BtZKnNc2ooe9lcDd0JJ8eHzylA0StSm2/view The recovery I am using is the latest codeworkx recovery here: https://sourceforge.net/projects/ch....1-0-20180414-codeworkx-dumpling.img/download for dumpling and https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download for cheeseburger.
This is exactly how I managed to get it booting on my 5T:
1) format data to remove encryption (I'm on OOS OB11 before doing this)
2) reboot recovery
3) factory reset
4) flash Mokee ROM (latest nightly July 15th is what I used)
5) flash noverity zip
6) reboot into OS
7) get past set up and reboot into TWRP
8) factory reset
9) install P GSI
10) mount vendor
11) install all the latest POST zips in the order of 1 to 3
12) install in-call audio fix
13) reboot into OS
OPTIONAL: After you have booted into Android P and the lockscreen shows. You can reboot back into TWRP and install magisk. I recommend this version as it was the only one working for me: https://drive.google.com/open?id=10LV_j43YUmmHNe0PjE_GNo9kkb-1gAnD
Notes:
- If you get kicked into recovery after trying to boot the GSI, look at TWRP's display log where flashable zip text are printed out and see if "init_user0_failed". This means you are encrypted and the GSI is having trouble with it. You must be decrypted as said above.
- If you get kicked into recovery and TWRP's display log shows something about RescueParty, flash the POST 3 zip again and rebooting. You might want to try this 2-3 times if it did not work the first time.
- Yes, this includes the new gesture pill nav bar. SETTINGS > SYSTEM > GESTURES > SWIPE UP ON HOME BUTTON
Bugs that I have encountered personally but may not affect you, need confirmation:
- MTP isn't working, even with the workaround.
- ADB is detected but when doing "adb devices", it will stay on the "connected" status so you can't issue any adb commands via PC.
- Fingerprint not even detected, no option to enrol in security settings.
To get rid of the three persistent notifications:
1) force stop pixel setup in app settings
2) install GMS update (https://apkdot.com/apk/google-llc/g...s-12-8-66-100400-200774163-beta-041/download)
3) when the blue notification appears again, open it and connect to wifi
4) force stop pixel setup again
5) the next time the notification appears, it should allow you to finally finish the setup
Hope this helps other OP5/5T users out there who are having trouble booting this.
Click to expand...
Click to collapse
Thanks! It worked!
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Before you start it's important to make a backup of your data you don't wanna lose.
I only have experience with installing phh-treble with TWRP, so this manual will be for TWRP.
Downloads:
First you have to download the image of PHH Treble (arm64) (Check this post)
After download just unzip the file.
(To know which version you need you can use the app Treble Check, if both of these blocks are green you need the A/B image else you nee the only A image.
The Mi8 is an only A image, but if you wanna know for sure you can use the app. )
In the PHH Treble rom there are no Google Apps (Gapps), so if you want the play store and such other apps of google you have to download OpenGapps Unofficial
After download just keep the file as zip.
The overlay patch for fixing the notch you can find it in this post
It's important to be on the latest MIUI version, doesnt depend on Miui V9 or Miui V10, both will work.
Installing:
Step 1:
Be sure you got a backup of your data.
Step 2:
Reboot your phone in recovery.
Step 3:
Do a factory reset with TWRP. (Go to wipe and just swipe for a Factory Reset).
Step 4:
Transfer the system-arm64-aonly-vanilla-nosu.img, the OpenGapps.zip and the treble-overlay-xiaomi-mi8.apk to your internal storage.
Step 5:
Go to install, tap on Install Image and choose system-arm64-aonly-vanilla-nosu.img
Select the System Image partition to flash the image to and swipe to confirm flash.
Step 6:
If you want root just flash Magisk V16.7 now and reboot, without root only reboot needed.
Step 7:
When your phone is booted successfully just reboot into recovery.
Step 8:
If you want the Gapps, just flash them now.
Go to install, tap on install zip if it's not seeing any zip's yet.
Select the OpenGapps zip and flash it.
(It might happen the Setup Wizard keeps crashing! You can fix this by removing the SetupWizard.apk from /system/priv-app/SetupWizard. Use the file manager of TWRP)
Step 9:
To fix the notch of the Mi8 you have to copy the treble-overlay-xiaomi-mi8.apk to:
- /system/overlay
- /vendor/overlay
Step 10:
Reboot the phone and it is ready to be used!
If you installed Magisk you can install ViperFX 1.7 to fix the crappy sound.
If you still have any questions, just ask!
If I can improve this manual, just let me know
Big credits to:
- phhusson: PHH Treble Rom
- Nezorflame: OpenGapps
This one is for me!
Current bugs found:
- Hotspot (Bluetooth tethering works!)
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
can install face id in rom treble ?
Any bugs? What's about GPS and Wifi?
Ziarrr said:
can install face id in rom treble ?
Click to expand...
Click to collapse
Not working yet
0312Penner said:
Any bugs? What's about GPS and Wifi?
Click to expand...
Click to collapse
GPS and Wifi are perfect!
only bugs are:
- Hotspot
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
Can I go back to MIUI if I don't like it or are there problems with loading backups?
NielsvdS said:
Not working yet
Click to expand...
Click to collapse
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
xdamami said:
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
Click to expand...
Click to collapse
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
It is possbile! Maybe I will also create a guide for going back from a treble rom to MIUI.
First time when I tried the PHH-Treble rom the Wifi and Camera didn't work so I went back to MIUI.
For now I'm really satisfied!
I've tried LOS and PHH 8.1 but my gps doesnt want to work on either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finger print sensor is working fine and wifi. I've just had a problem with the playstore on LOS but that might just be the version of GApps they install as default
EDIT.
I've fixed GPS now as far as i can tell. After turning gps off and on a few times and a couple of other things its now working
How is the camera at the moment compared to MIUI?
_katho_ said:
How is the camera at the moment compared to MIUI?
Click to expand...
Click to collapse
It is crappy, WhatsApp is creating to much brightness, but the OpenCamera works well, pictures are ok, but far from the stock camera
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
PolariSz said:
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
Click to expand...
Click to collapse
Yeah! So nice.
I will take some time to create an custom rom for the Mi8 based on AOSP 9.0
NielsvdS said:
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
Click to expand...
Click to collapse
Ha Just one day))) there is a kernel source available)). What is your stage for kernel komple? will be good with Nethunter
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
moe.ze.chief said:
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
Click to expand...
Click to collapse
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
NielsvdS said:
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
Click to expand...
Click to collapse
Thanks!
Do you have a Link for the magisk module?
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
Just flash e.g. an xiaomi.eu Rom. There is a full installer and its no problem to go back to miui.
Factory reset and flash in TWRP
xXx NoLimits ☆ Magisk TWRP Installer- SM-N986B Exynos ☆
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
☆ Magisk TWRP Installer ☆
This is originaly a Magisk TWRP Installer made by xXx for OnePlus 8 Pro.
I just took and modified it to get it work on our Samsung Galaxy Note 20 5G Ultra.
Our Dr.Ketan helped me to fix the TWRP Installer with the path of the recovery partiton.
1. Before using this Installer you must need following!!!!...... else it wont work:
- Root your device like Dr.Ketan mentioned in his Root thread!!! --> [Guide] How to root N20 Ultra (N986B)(N9860)
2. How you can use this TWRP Installer?
- Download the Magisk TWRP Installer from post 2
- Just open Magisk -> Go to Modules -> Press Install from storage -> Choose the TWRP Installer -> Flash and press Reboot
Congratulation now you flashed TWRP made by ianmacd
3. How to update the Magisk TWRP Installer?
-Download the latest TWRP from Ian and swap only the .img file inside the .zip and repeat point 2.
Credits
@xXx ; @Dr.Ketan ; @ianmacd
Source from TWRP made by Ian:
https://github.com/ianmacd/twrp_c2s
Telegram Group:
Be my guest at Samsung Galaxy Note 20 / 20 Ultra
☆ Downloads ☆
Android 11
TWRP_3_5_0_10-A11_6_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_5_0_10-A11_1_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
Android 10
TWRP_3_4_0_1a23_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a20_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a19_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a18_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
TWRP_3_4_0_1a16_ianmacd_xXx-Installer_N986B_SGN_20_5G_Ultra.zip
reserved..........
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/galaxy-note-20-ultra/development/recovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
nawaf2816 said:
I do have the TWRP already installed that I got from the the main thread : https://forum.xda-developers.com/ga...ecovery-twrp-galaxy-note-20-note-20-t4152335.
Can I just install this Magisk TWRP module to override the current TWRP ?
Click to expand...
Click to collapse
Exactly for that purpose it is made my friend ?
Let us know the result
xenix96 said:
Exactly for that purpose it is made my friend
Let us know the result
Click to expand...
Click to collapse
I have successfully installed it and installation was very quick & smooth! :good:
I will keep monitoring for any issue may arises , hopefully non ..
Thank you dude, Good work !
Good job :good:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
nawaf2816 said:
The backup/restore function doesn't seem to work . Which is expected .. as i haven't got any working nand backup since the time of old devices ..
I wonder if any one got any successful backup either full or partial for some parts .. ?
I'm using a stock rooted ROM with lite magisk module to enable some CSC features .
What I'm looking for is the ability to restore the system (mainly boot portion) to get back the phone booting if any improper installation of a module or app affected the device to boot normally !
Click to expand...
Click to collapse
Vitalik666teen said:
Many function doesnt work in this moment.And recovery have problem with reboot from recovery to system and others problem.
Stock rooted ROM the best for now.
Click to expand...
Click to collapse
I hope our devs can manage to solve the issues in the twrps.
For flashing roms, kernel, magisk, twrp etc it is working at the moment
can i install this TWRP on device N981B
tnx
usitaly said:
can i install this TWRP on device N981B
tnx
Click to expand...
Click to collapse
This recovery is only for N986B.
Sorry mate
Oh what the hell.
I tried that on my one plus 8 pro when I had it.
Can you do snapdragon as well?
When will the system recovery partition be supported. In TWRP ??
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
What is the way to flash I use the old version
Is mtp fixed in this version?
songoku1 said:
Is mtp fixed in this version?
Click to expand...
Click to collapse
Good question.
I didnt test it cause i use the sd card which is working great.
Let us know if you want test and have a result ?
xenix96 said:
Uploaded new ianmcd a18 TWRP in post #2
If you get bootloop dirty reflash your custom rom -> worked for me :good:
Click to expand...
Click to collapse
Where can I find this telegram channel?
Uploaded new ianmcd a19 TWRP in post #2
Just flashed over Magisk without a issue :good::good::good::good::good:
Changelog:
Samsung TWRP unofficial build announcements
(Ian Macdonald)
The following alpha 19 releases for devices launched with Android 10 have, in addition to the latest round of TWRP fixes, a couple of new features:
* When using the file manager, it is now possible to open a terminal in the currently selected folder. This currently works only on devices with TWRP in portrait orientation.
* logd now runs in recovery, so adb logcat will now work when the device is booted to TWRP.
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
razor_1911 said:
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
Click to expand...
Click to collapse
This is a good ROM. Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great! It is the same as CherishOS 4.2 a13gsi.
razor_1911 said:
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
Click to expand...
Click to collapse
It's a pity that the rounded corner effect on the widget is lost. Hope it will be fixed in the next version.
audio out by cable is working ?
I have updated to the latest rom v8.5 but still haven't added to the rom the rounded corner widget interface - google's precious thing.
Can one root via Magisk with this rom pls? I have to have Adaway, SD Maid, picky banking apps all working
How does one out TWRP on this A/B partition device pls?
TheDon13 said:
How does one out TWRP on this A/B partition device pls?
Click to expand...
Click to collapse
Hold down the power + volume down keys then enter fastboot.
TheDon13 said:
Can one root via Magisk with this rom pls? I have to have Adaway, SD Maid, picky banking apps all working
Click to expand...
Click to collapse
Just sideload the zip through twrp.
TheDon13 said:
Can one root via Magisk with this rom pls? I have to have Adaway, SD Maid, picky banking apps all working
Click to expand...
Click to collapse
Rename apk to zip then put in sd card and install via boot (boot is recovery mod).
razor_1911 said:
First I'm not the developper of this rom and just share it here
credits go to Maciej Mirosław
Link to download:
https://sourceforge.net/projects/rombuild/files/RiceDroid/
Clean Flash
1. Download the proper flashable ZIP for your device, as well as all additional images
2. Flash provided boot, vendor_boot via Fastboot
3. Reboot to Recovery
4. Sideload the ROM
5. Sideload firmware (if necessary)
6. Format data
7. Reboot to System
Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Sideload the ROM
4. Reboot to System
There is a guide how to flash custom rom thanks to @rayman95 if someone gets stuck during the process.
I personally tested it, and its working perfectly fine, no bugs or anything.
Click to expand...
Click to collapse
When you talk of recovery, do we mean TWRP custom recovery? As it is TWRP that I cannot get to fastbooot flash on this phone, due I think to it being an A/B device. My phone is bootloader unlocked but even doing fasttboot flash recovery to both partitions results in a fail. Grateful for any advice pls folks. Thanks
Aitra said:
Hold down the power + volume down keys then enter fastboot.
Click to expand...
Click to collapse
My problem is not being able to flash/install TWRP on this A/B device. It is rooted via Magisk fine, with adaway, sd maid, magisk all working fine. Banking apps all good thanks to freezing Magisk (Hide) within SD Maid
Maybe this info hasthe answer to my twrp issue!
[HowTo] Install Recovery image
How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu
Is this the kind of thing others followed?
TheDon13 said:
Maybe this info hasthe answer to my twrp issue!
[HowTo] Install Recovery image
How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu
Is this the kind of thing others followed?
Click to expand...
Click to collapse
you can follow the guide here https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4306807/
razor_1911 said:
you can follow the guide here https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4306807/
Click to expand...
Click to collapse
Many thanks Razor_1911....I'll give that a try
There is a new update guys, check it out. Released 25.11.2022
Error not rounding the widget corner outside the main screen.