I have realme x3 superzoom with RUI 2.0.
I want to unlock bootloader but my device doesn't boot in fastboot mode.
I tried everything using adb reboot, and with in depth test and manually too but everytime device goes to fastboot just for a second and then reboot again.
I tried all the process in RUI 1.0 but result was the same. I'm literally annoyed right now. Can anyone have solution ?
Related
my friend's redmi note 3 kenzo version just got stucked on fastboot screen because he tried to flash the device recklessly and now he can't do anything about it except turning it off, when he tried to turn it on again it's flashing mi logo and then shutdown, the only thing he can do is to hold the power + volume down button and get to fastboot screen, stucked there and that's it.
he ask me to fix his phone but i'm new to xiaomi customization world, the thing that i learn so far is :
1. this device is kenzo version (i don't even know what's the difference with the kate version)
2. i cannot flash using the miflash tool because it's getting the "remote: partition flashing is not allowed" message
3. i tried to unlock the bootloader using any kind of software and adb tool and i keep getting "remote: token verification failed" message
now, i got stuck and i don't know what to do anymore. what i know is i have to unlock the bootloader to move on to the next step, does anyone know how to solve my problem?
redmi note 3 is Mediatek device
redmi note 3 pro can be Kenzo or Kate (Qualcomm device)
Kenzo has 150mm
Kate 152mm
What file flash your friend? what is recklessly? (you try to write recovery?)
you try with mi flash?
or flash with fastboot?
http://en.miui.com/download-301.html#438
i don't know what ROM or methods he used to flash his device, but when he gave it to me the condition is as i mentioned earlier.
i tried flashing with miflash, got the message "remote: partial flashing is not allowed"
i tried flashing manually with adb tools, i got the same message
i googled for a bit and found out i need to unlock the bootloader, i can't do that since i can't get to developer option to enable "oem unlock"
what can i do now?
Unlock bootloader unofficialy HERE
I dont try that.
You can use EDL mode? HERE
Install rom/recovery with locked Bootloader ... HERE
I never use EDL MODE but is your solution (i think)
Good luck, if my comment help you hit thanks button
phantomsix6 said:
i don't know what ROM or methods he used to flash his device, but when he gave it to me the condition is as i mentioned earlier.
i tried flashing with miflash, got the message "remote: partial flashing is not allowed"
i tried flashing manually with adb tools, i got the same message
i googled for a bit and found out i need to unlock the bootloader, i can't do that since i can't get to developer option to enable "oem unlock"
what can i do now?
Click to expand...
Click to collapse
Only solution is Flash fastboot rom in edl mode. Coz May be ur device is relocked.
i found something while googling, and found this tool called "Android fastboot reset tool v1.2" there is an option to go to EDL mode there, but when i clicked "enter EDL mode" it says failed and the device just turned off, and that's it
there is some function i don't understand though like "reset FRP" or something
See my post i give you some links... The second have moded fastboot (for PC) with this method you can enter to EDL.
If not probably you need a test point method.
i've tried the link to go into EDL mode that you provided, it says "your device rebooted to EDL mode sucessfully" but the device is shutting down, and when i check "fastboot devices" on adb, it showed blank, so the conclusion is, i can't even go to EDL mode.
what do i do now?
http://en.miui.com/thread-650726-1-1.html
Search EDL mode kenzo or redmi note 3 pro
hi..
Greetings to every Android Magicians out there...!
Device:- MiA1 (Never rooted)
1.USB debugging was enabled and OEM is not enabled.
2.Hence Boot loader is Locked.
3. Adb drivers installed in my laptop.
4.Windows driver signature are disabled.
5. Xaiomi flash tool and drivers installed.
6. Qualcom HS-USB Diagnostics 900E installed.
7. Can be enter in fastboot mode and edl mode as well.
The problem:- My MiA1 was never rooted (USB debugging was enabled and OEM is not enabled.).
All apps are force stopped suddenly while using the phone so tried to reboot my devices,
and there it begins.. it stuck at boot logo.
Things i have tried:
1. Fastboot Mode:
Since the boot loader is locked i cant flash Any ROM through fastboot so i tried to enter in EDL mode through CMD.,But failed.
so i just open the back panel & however entered in EDL mode by Testpoint.
(and i've tried in fastboot through cmd { fastbooot oem unlock } it says successful but when i check the status through
{fastboot oem devices-info} but the bootloader is still locked).
2. Test Point Method:
I tried to flash MiA1 official global version ROM's (7,8,9 as well) through Xaiomi Flash tool(2015,2016,2017 versions) by test point Methods.
i have encountered the problems like AKC don't match and Cant receive Hello packets.
However i have got solved this Prolems by using Beta version of Xaiomi Flash tool.
3. When i flash (tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794) flashing was successful but devices still stuck at
Androidone logo.
Tried to flash other versions of ROM (tissot_images_V10.0.4.0.PDHMIXM_9.0) flashing was successful but devices still stuck at
Androidone logo.
By the way i have tried it using different type C cables and different ports (COM5, COM20,COM40 etc) and and different laptop as well but No luck.
i hope you guys do some Magic and help me out.
Thank you so Much for reading this thread.
Hi,
i tried to upgrade to the latest 11.0.6 global ROM and as usually I only booted to TWRP and sideloaded the ROM. Bootloader is unlocked, already flashed a lot of different stock & custom ROMs.
adb reboot fastboot
fastboot boot twrp.img (used 3.2.3 with working recovery)
[factory reset from within TWRP]
adb sideload [the new 11.0.6 ROM]
adb sideload had an error 7 at some point and did not finish. No big deal I thought -> [reboot system] from within TWRP and tried to enter fastboot again at first boot [volume down]
BUT: now I am not able to enter fastboot again. The phone starts with the orange 'POCOPHONE by Xiaomi' screen and seems to reset after a minute or so -> loop. Holding [volume down] while booting only brings a black screen (not off, a little grey but no fastboot logo etc.). Probably, fastboot didn't flash correcly. Also, it is not recognized either in fastboot or adb.
Anybody else had this before? Is there something I can try to revice it? Any helpful information is highly welcome,
thanks
I'm no expert, did you try another data cable? Just in case you could use a dry toothbrush and clean the phone's connector . What does the computer says in power+volume down mode? It should say what device you're connecting and add drivers.
There might be a way to repair the bootloader , it involves qcom tool. There's a guide somewhere. I'd try first change cable and computer.
Is it possible to install twrp recovery and root using magisk in this phone or not possible because of mediatek processor?
Bhai have patience , this is Mediatek we all know but another thing to notice is This is MT- g95 SoC ?
Orange state in realme 7 when bootloader unlocked but unable to use fastboot.
I have unlocked my realme 7 bootloader with in-depth test built for realme 6 pro. It is working. But now after unlocking the phone factory resets itself and when trying to go into fastboot mode with ADB command ADB reboot bootloader the fastboot verify check fails all the time. So how to go into fastboot mode after bootloader unlock. This issue never happened when I start in-depth test after permissions. It's very strange that even after unlocking the phone is not booting into fastboot mode while giving error in verification. Guys can anyone knows how to solve this. Please reply asap.
Realme 7 After unlocking the bootloader is not going into fastboot mode again.
Can anyone tell when twrp for realme 7 wipp be available
I think i made a mistake by choosing mtk soc because it's hard chance to get twrp for mtk soc
Simple solution realme 7
Senxco said:
I have unlocked my realme 7 bootloader with in-depth test built for realme 6 pro. It is working. But now after unlocking the phone factory resets itself and when trying to go into fastboot mode with ADB command ADB reboot bootloader the fastboot verify check fails all the time. So how to go into fastboot mode after bootloader unlock. This issue never happened when I start in-depth test after permissions. It's very strange that even after unlocking the phone is not booting into fastboot mode while giving error in verification. Guys can anyone knows how to solve this. Please reply asap.
Click to expand...
Click to collapse
I think your adb driver not working please install adb driver reinstall and verfiy fails problem solve, thanks
No no adb driver is working and tested on other devices. I think the problem is with smartphone serial key ( It shows serial key mismatch and therefore fastboot unlock verify fail in fastboot mode).
To Root you phone:-
Download your device boot image > download magisk manager > patch your device boot image > go to fastboot mode > type in command >fastboot --disable-verity--disable-verification > flash vbmeta (fastboot flash vbmeta (put your vbmeta path here) > flash magisk patched image (fastboot flash boot (put your patched file path here) now reboot your phone it will be rooted if on First boot it didn't then reboot your device
Ok so my Xiaomi Mi 8 Lite was (hard??)bricked because I flashed something I shouldn't have so now I can still access recovery mode TWRP but fastboot does not work at all. I've tried flashing lineage but when I boot it back up it just brings me back to TWRP after rebooting again.
By fastboot not working I mean that once I connect the device to a computer, the phone automatically quits fastboot mode. ADB can't even seem to find it in the devices list.
What should I do? Is my phone dead forever?
Thank you!!!