Related
Hi all, Pie for moto z2 play released in brazil. In India, the update will rollout may be from 2nd October.
android pie release notes: https://motorola-global-portal-pt.custhelp.com/app/answers/detail/a_id/142103
Courtesy: Motorola India Fans - facebook
Anyone from Brazil? how is pie in moto z2 play?
No update here.
No entiendo, por todos lados dicen que hay actualizacion pero no aparece.
welingtonbr said:
No update here.
Click to expand...
Click to collapse
Maybe it will come in October 1st week because they already released pie release notes for z2 play. Fingers crossed.
When someone receives the update, can you share a backup of /vendor, /boot and /system in Google Drive, please?
Tks!
No one has received the update yet ? Hmmm......
Either people are too busy testing it or maybe it's....
PRANK OF THE YEAR by LENOVO MOTO !
Good news
Translated via Google Translate
"moto z2 play - Android ™ 9.0 Pie - General Operating System Update Information
INTRODUCTION
We are pleased to announce a new software update for the moto z2 play. This update introduces important improvements to the security of your phone.
For more information about Motorola updates and support, visit www.motorola.com/mymotoz.
NOTE: All phone information will be saved. You will not be able to use an earlier version of the software after you install this update.
IMPROVEMENTS
This update includes changes such as:
Android ™ 9.0 Pie
Android Security: Includes Android security fixes through September 1, 2019
Android ™ 9.0 Pie enhances your mobile experience with intuitive new navigation and recent apps, an enhanced Do Not Disturb mode, a colorful settings menu, a longer battery life and a revamped split screen. Android Pie has also redesigned Quick Settings, simplified volume controls, brought you an easier way to manage notifications, and more.
After you install the software update, you will notice some changes, such as:
Usability
Adaptive Battery: Do more with a single charge. This feature prioritizes battery power for the apps you use the most and applies restrictions to those you use the least. Battery Saver can now be automatically activated anywhere from 75% to 5%.
Adaptive brightness: The device learns about your habits and automatically adjusts the brightness to suit your activities.
Quick Setup Improvements: No shortcuts (buttons are no longer expandable, but holding down a button takes you to the configuration details). Icons have been redesigned with a rounded concept and circular background.
Rotation button: Android Pie gives you the ability to rotate even when auto rotate is off. A spin button is displayed whenever it detects that the phone has changed orientation.
Dual Chip Settings: When you press the Chip button in Quick Settings, a
This activity is displayed in full screen so you can select the desired chip and manage data usage.
Refurbished Set Up App: Colorful icons for each selection with a circular background. It also tells you if the phone is in Mute or Do Not Disturb mode. The order, name, and position of the settings options have not changed.
Better Screenshots: Another useful feature of Android 9.0 is the addition of a virtual screen capture button / shortcut in the power button menu (the old power and volume buttons method still works). You can edit your screenshots right after taking them and a delete option is also available.
Enhanced audio controls: The volume slider is now upright and next to the volume buttons. Users can only switch between Play, Mute and Vibrate modes. In addition, the volume buttons change the media volume by default, and the player can be set to Vibrate mode by simultaneously pressing the volume up and power buttons. You can also access Bluetooth device volumes when you are connected.
Zoom in on text: You can finally avoid mistakes by selecting the wrong text. When you hold down a sentence or text, the zoom automatically increases. It also helps you read small texts and select words accurately.
New and updated emojis: 157 new emojis and a gender neutral concept.
Settings icon when in PIP mode: When you tap the new Settings icon, you will see the app's PIP settings, where you can enable or disable the feature.
Other UI changes: Now the time is on the left and the search bar is rounded. There is a new task manager / recent list that shows a horizontal rather than vertical list and includes split screen features by pressing the app icon above the thumbnail. Dragging the split screen border will display the desired app on the full screen.
Notifications
Notifications UI changes: Notifications now have rounded corners. They also support inline images / stickers and differentiate individual / group conversations.
Discard notifications: Android Pie will now suggest some actions for the types of notifications you normally discard. A new option to stop notifications is displayed when they are frequently dismissed.
Notification Bar: Maximum of four notifications visible in the status bar. Previously the list was truncated and with a dot to indicate more unseen icons.
Manage notifications: A shortcut at the bottom of cards in notifications that lets you see a list of recent user-facing notification activity. If something is annoying you, you can place the right button to disable unwanted notifications in the future."
Download link: dlmgr.gtm.svcmot.com/dl/dlws/1/download/PBCjCNgadHyM8qmKwzYfQYnkj9%2FmlRBFuisKgbOUteakdDlyL%2FhPejN2OpCneRfSL6aUdr6n%2BfXH6pDXWqPDK9BVj1cHbMBLQbasIuxk2sn9EXZPeK8F6qxtmTFAu1BguiGIUAnonq364zSVotQFLz49RzjNM5rNI%2FHA1Fg1UACi02XNs%2B6v%2Fn59H8KlevjUCfhxNpGptISdbQiKrwlm0w%3D%3D
Version :
Blur_Version.29.11.30.albus.retail.en.US
Display Version :
PPS29.133-30
PreInstall Notes :
Quase lá!
O download da atualização foi concluído e está pronto para instalação.
Toque em Instalar agora para concluir a atualização agora.
Todas as informações do telefone serão salvas.
Após a conclusão, o telefone reinicializará automaticamente e funcionará normalmente.
Para mais informações sobre a atualização, clique aqui.
Upgrade Notification :
Confira alguns dos destaques desta atualização:
Android™ 9.0 Pie
Segurança Android: inclui as atualizações de patches de segurança Android até 1 de Setembro de 2019.
Para mais informações sobre a atualização, clique aqui.
welingtonbr said:
Download link: dlmgr.gtm.svcmot.com/dl/dlws/1/download/PBCjCNgadHyM8qmKwzYfQYnkj9%2FmlRBFuisKgbOUteakdDlyL%2FhPejN2OpCneRfSL6aUdr6n%2BfXH6pDXWqPDK9BVj1cHbMBLQbasIuxk2sn9EXZPeK8F6qxtmTFAu1BguiGIUAnonq364zSVotQFLz49RzjNM5rNI%2FHA1Fg1UACi02XNs%2B6v%2Fn59H8KlevjUCfhxNpGptISdbQiKrwlm0w%3D%3D
Version :
Blur_Version.29.11.30.albus.retail.en.US
Display Version :
PPS29.133-30
PreInstall Notes :
Quase lá!
O download da atualização foi concluído e está pronto para instalação.
Toque em Instalar agora para concluir a atualização agora.
Todas as informações do telefone serão salvas.
Após a conclusão, o telefone reinicializará automaticamente e funcionará normalmente.
Para mais informações sobre a atualização, clique aqui.
Upgrade Notification :
Confira alguns dos destaques desta atualização:
Android™ 9.0 Pie
Segurança Android: inclui as atualizações de patches de segurança Android até 1 de Setembro de 2019.
Para mais informações sobre a atualização, clique aqui.
Click to expand...
Click to collapse
Sir, your download link is not working
Bcl2 said:
Sir, your download link is not working
Click to expand...
Click to collapse
There's a working link in the other thread. Under news/guides.
Link and instructions for Pie OTA download and install.
kggy said:
Link and instructions for Pie OTA download and install.
Click to expand...
Click to collapse
any one tried..?. if yes, then please post the screenshots of the same. Thanks in advance.
kggy said:
Link and instructions for Pie OTA download and install.
Click to expand...
Click to collapse
spam links
OldUncle said:
spam links
Click to expand...
Click to collapse
The Google Drive link to the OTA was good this morning (CET), I downloaded and installed it. Don't know about the rest of the links cause I had everything already installed way back. So far the update seems smooth.
OldUncle said:
spam links
Click to expand...
Click to collapse
ghost.deathrider said:
any one tried..?. if yes, then please post the screenshots of the same. Thanks in advance.
Click to expand...
Click to collapse
Downloaded and installed it a few hours ago, so far so good. See the attached images.
Does not work
audacitylk said:
When someone receives the update, can you share a backup of /vendor, /boot and /system in Google Drive, please?
Tks!
Click to expand...
Click to collapse
I backed up these partitions and it didn't work on a z2 play that had Oreo Installed
HeltonMax said:
I backed up these partitions and it didn't work on a z2 play that had Oreo Installed
Click to expand...
Click to collapse
Strange... It was supposed to work, because the bootloader is unlocked, just flash the TWRP, copy, zip, post and it was... Anyway, thanks, bro. I'm going for the same OTA.
ANDROID PIE WITH MAGISK [TWRP BACKUP]
Link: https://drive.google.com/open?id=1AgcKkG3XAQWXEgmpVdprxDpTeiPVP1pb
Use the RAR app to extract the files correctly.
Compressed Size: 3.12GB
Extracted Size: 8.66GB
Extract on /sdcard/TWRP/BACKUPS and restore.
I hope it works.
My device does not connect to the 4G + of the operator CLARO BR. Can anyone tell me if it has anything to do with the modem? If I flash the Oreo modem, can it solve?
After rooting my Galaxy Z flip I tried to connect my Galaxy Gear S3 Frontier to it but it seemed to get stuck at "Setting up your watch". The phone showed that it was not connected via bluetooth with the watch so I started searching. I found this old post from the Galaxy S7 forum and I am sharing how I managed to fix it
How to fix the problem:
Uninstall these apps from your phone: Galaxy Wearable, Gear S Plugin and Samsung Accesory Service.
Install the Gear S Plugin from here
Install the Samsung Accessory Service from here
(Optional)Now go to Magisk Manager and install the "Magisk Hide Props Config"
(Optional)Install this terminal
(Optional)Open it and write: "su" "props" "1" "f" "7" "18" "y" based on your android version "3" for R "2" for Q "y" and reboot
Install Galaxy Wearable from Google Play
Now open it and your watch should connect just fine
All credits go to the person from this post I am just sharing my version of it. Hope this helps some people.
RoboAbathur said:
After rooting my Galaxy Z flip I tried to connect my Galaxy Gear S3 Frontier to it but it seemed to get stuck at "Setting up your watch". The phone showed that it was not connected via bluetooth with the watch so I started searching. I found this old post from the Galaxy S7 forum and I am sharing how I managed to fix it
How to fix the problem:
Uninstall these apps from your phone: Galaxy Wearable, Gear S Plugin and Samsung Accesory Service.
Install the Gear S Plugin from here
Install the Samsung Accessory Service from here
(Optional)Now go to Magisk Manager and install the "Magisk Hide Props Config"
(Optional)Install this terminal
(Optional)Open it and write: "su" "props" "1" "f" "7" "18" "y" based on your android version "3" for R "2" for Q "y" and reboot
Install Galaxy Wearable from Google Play
Now open it and your watch should connect just fine
All credits go to the person from this post I am just sharing my version of it. Hope this helps some people.
Click to expand...
Click to collapse
Hola tengo un S10 y tampoco me va el galaxi watch. Me podrias explicar esto que has puesto porque soy muy novato y no lo entiendo bien.
Translation: Hello, I have an S10 and the galaxy watch does not work either. Could you explain this to me because I am a very newbie and I do not understand it well.
jlsoler60 said:
Hola tengo un S10 y tampoco me va el galaxi watch. Me podrias explicar esto que has puesto porque soy muy novato y no lo entiendo bien.
Translation: Hello, I have an S10 and the galaxy watch does not work either. Could you explain this to me because I am a very newbie and I do not understand it well.
Click to expand...
Click to collapse
Basically there are two versions of Samsung gear plugin. You need to find the one that has a N in the end. This allows the gear to communicate with the watch. Basically download and install all that I have listed and it should work. You can also check this post here for further details https://forum.xda-developers.com/t/...nd-probably-other-samsung-weareables.3931738/
Hi! Sorry to revive an old thread, but this was the actual only solution that actually howrked for me, on my A53 no less. However, the notifications on my Gear S3 behaved quite different... where I used to have the option to preview messages one by one, now I have only a single "x messages from x chats" notification, with only one option to check on phone instead of ungrouping, reading more, etc.
I feel like it could be a Gear S plugin thing... maybe the "N" version doesn't allow those more complete notifications? Anyone got their rooted phone working with them?
Modded firmware of ALLWINNER H3 based MXQ 4K 5G Box, to get full Android TV experience from the TV box.
I AM NOT RESPONSIBLE FOR BRICKED DEVICES, OR ANY TYPE MESS UP OF YOUR DEVICE.
Features of the rom are:
>TV Launcher with recommendations(LeanbackOnFire)
>Leanback Keyboard
>TV Google Playstore
>Google Chromecast (working with the help "Cast Receiver", you can share screen of your mobile, pc without any lag)
>Google Voice Search globally enabled
>Changed Font to GoogleSans
>Pre-Rooted with Magisk (now root is systemless)
>Added microG
>Fully Debloated (de-googled totally, use microg)
>Changed device model to "Razer Forge" (for Playstore to work)
>Added Controllers support (not tested, magisk mod)
>Enabled VP9 software decoding globally (lag af)(480p 30fps works decent)
>Better RAM Management (tv games work well Redball 4, etc)
>Power off feature
>Faked security patch level(2020) (magisk mod)
and many more to find out.....
images are attached below
If Wi-fi isn't working, this rom may fix it,
following wifi modules work on this rom:
SC6256P
SV6256P
SV5256P
The install process is same as here in this thread https://forum.xda-developers.com/t/rom-official-7-1-allwinner-h3-mxq-pro-4k-5g-stock-rom.4251469/
or else in telegram channel also the process is given.
Android Version in actual is 7.0 and not 9.0
Download Here: https://t.me/customandroidtv
Join the telegram group and from notes ask for Allwinner H3 rom.
(The zip file contains ROM(as a twrp backup), TWRP, and the .img ROM original(so that you could flash that through pc and boot to twrp recovery))
Thanks to all the open source projects that helped me give this ROM cool finish like this.
SreyasXd said:
Modded firmware of ALLWINNER H3 based MXQ 4K 5G Box, to get full Android TV experience from the TV box.
I AM NOT RESPONSIBLE FOR BRICKED DEVICES, OR ANY TYPE MESS UP OF YOUR DEVICE.
Features of the rom are:
>TV Launcher with recommendations(LeanbackOnFire)
>Leanback Keyboard
>TV Google Playstore
>Google Chromecast (working with the help "Cast Receiver", you can share screen of your mobile, pc without any lag)
>Google Voice Search globally enabled
>Changed Font to GoogleSans
>Pre-Rooted with Magisk (now root is systemless)
>Added microG
>Fully Debloated (de-googled totally, use microg)
>Changed device model to "Razer Forge" (for Playstore to work)
>Added Controllers support (not tested, magisk mod)
>Enabled VP9 software decoding globally (lag af)(480p 30fps works decent)
>Better RAM Management (tv games work well Redball 4, etc)
>Power off feature
>Faked security patch level(2020) (magisk mod)
and many more to find out.....
images are attached below
If Wi-fi isn't working, this rom may fix it,
following wifi modules work on this rom:
SC6256P
SV6256P
SV5256P
The install process is same as here in this thread https://forum.xda-developers.com/t/rom-official-7-1-allwinner-h3-mxq-pro-4k-5g-stock-rom.4251469/
or else in telegram channel also the process is given.
Android Version in actual is 7.0 and not 9.0
Download Here: https://t.me/customandroidtv
Join the telegram group and from notes ask for Allwinner H3 rom.
(The zip file contains ROM(as a twrp backup), TWRP, and the .img ROM original(so that you could flash that through pc and boot to twrp recovery))
Thanks to all the open source projects that helped me give this ROM cool finish like this.
Click to expand...
Click to collapse
hello i need add soport touch screen to this img .y have hid-multitouch.ko complile with correct vermagic .but i cant load module ,modprobe and insmode .fails .can you help me with that?
Where can I download the files needed?
Hello, can you help me with a tv box mxq pro 4k allwiner H3 with 2 GB of Ram and 8 internal, it has android 7.0, I need to install Android TV
Good topic! I did the ROM installation correctly but there are two things I can't. The first, how do I update google play services? He won't let me do it. And secondly, how do I change the wallpaper?
------------
¡Buen tema! Hice la instalación correctamente de la rom pero hay dos cosas que no puedo. La primera, cómo actualizo los servicios de google play? No me deja hacerlo. Y segundo, cómo cambio el papel tapiz?
Hi, does it work with a Q44_V5.1_20210118 board? And if it does, can I flash with an sd card?
-------------------------------------------------------------------------------------------------------
Hola, sí funciona con una placa Q44_V5.1_20210118? Y si es asi, puedo flashear con una sd?
bjmsam said:
The info displayed under Settings -> About suggests that I received the 1GB model despite ordering the 2GB model. I have notified the vendor and am awaiting guidance.
Click to expand...
Click to collapse
Hello, any tutorial on how to root Samsung Galaxy A02 SM-A022M?
did you achieve some bro?
I tried with adb and fastboot with the oem unlock command to be able to flash, but it does not work. By the way I did not find TWRP support for this model, another recovery is needed to be able to install. I wanted to try eftsu, but I can't modify the bootloader. Apparently root can't be done. Help
mezca said:
did you achieve some bro?
I tried with adb and fastboot with the oem unlock command to be able to flash, but it does not work. By the way I did not find TWRP support for this model, another recovery is needed to be able to install. I wanted to try eftsu, but I can't modify the bootloader. Apparently root can't be done. Help
Click to expand...
Click to collapse
Samsung models doesn't had Fastboot mode but you can check the OEM Unlock in developer options (I tink is available on my A022M with android R)
At this moment due to the chipset (MT6739W) we can't see twrp for now (I had another model with same chipset and those model doesn't had twrp it's a moto e 6 play)
And a permanently root for now is not possible but temporary root can work I tink Temp root for MTK ArmV8
MauriJ2001 said:
Samsung models doesn't had Fastboot mode but you can check the OEM Unlock in developer options (I tink is available on my A022M with android R)
At this moment due to the chipset (MT6739W) we can't see twrp for now (I had another model with same chipset and those model doesn't had twrp it's a moto e 6 play)
And a permanently root for now is not possible but temporary root can work I tink Temp root for MTK ArmV8
Click to expand...
Click to collapse
mtk-su will not work, the phone is too new
your best bet will be this tool but it hasnt really been tested against samsungs https://github.com/bkerler/mtkclient
Plis saya mohon untuk bisa membuka root
Translated by GT: Pls I beg to be able to open root
Olá, tenho um SM-022M, fiz o root usando o magisk+Odin, não usei o TWRP. Caso ainda não tenhe encontrado solução posso postar o tutorial que segui.
(Hi, I have an SM-022M, I rooted it using magisk+Odin, I didn't use TWRP. If you still haven't found a solution, I can post the tutorial I followed.)
xphuser said:
Olá, tenho um SM-022M, fiz o root usando o magisk+Odin, não usei o TWRP. Caso ainda não tenhe encontrado solução posso postar o tutorial que segui.
(Hi, I have an SM-022M, I rooted it using magisk+Odin, I didn't use TWRP. If you still haven't found a solution, I can post the tutorial I followed.)
Click to expand...
Click to collapse
Eu gostaria demais de saber como você fez! rs
Translated by GT: I would love to know how you did it! LOL
Se após gravar o novo boot.img o sistemas estiver entrando em bloqueio, é provável que o boot loader esteja bloqueado.
Certifique-se que bootloader estaja unlock.
Translated by GT:
If after writing the new boot.img the system is going into lock, it is likely that the boot loader is locked.
Make sure bootloader is unlocked.
Greetings to all. Just a friendly reminder about XDA Rule #4:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you: Badger50 FSM
Hello friend,has your problem been resolved?
I tried everything to Root SM-A022F/DS
im using mac pro, so the Odin options wont work , using CLI via ADB doesn't work
Also what is the custom ROM/firmware for this device SM-A022F/DS over android 11 ?
----------------------- ------------------------------
Ola pessoal, tudo bem?
Procurei em dezenas de lugares, como recuperar meu celular com firmware / bootloader / etc... tudo zuado...
Nâo importa o que você fez no celular.
Se o boot no modo fast do seu celular tiver funcionando (segura Volume '-' junto botâo de ligar ) isto vai funcionar para você.
1- Baixe o arquivo 'motog7-recovery.zip' ( ja tem os '.img', adb.exe, fastboot.exe, etc.. )
2- Descompacte ele em uma pasta simples (ex. 'C:\motog7')
2- Execute o arquivo 'flashfile.bat' e espere (pode demorar). (Ele reinicia sozinho)
Boa sorte pessoal!
----------------------- -------------------------------
Hello everyone, everything good?
I looked in dozens of places, how to recover my phone with firmware / bootloader / etc... all messed up...
It doesn't matter what you did on your cell phone.
If your phone's fast mode booting is working (hold Volume '-' next to power button ) this will work for you.
1- Download the 'motog7-recovery.zip' file (you already have the '.img', adb.exe, fastboot.exe, etc..)
2- Unzip it into a simple folder (eg 'C:\motog7')
2- Run the 'flashfile.bat' file and wait (may take a while). (It resets itself)
Good luck guys!
-----------------------
Link to Download:
NOVO_LINK
No link to file mate
imarsh72 said:
No link to file mate
Click to expand...
Click to collapse
The file is big.. i tryng to upload in another site. =S
Link: NOVO_LINK
Hi there, @heitor.mejias File is still missing. Will you upload it again?
And, could you tell me if is there any specification about the phone we should know?
Hellmetal666 said:
Hi there, @heitor.mejias File is still missing. Will you upload it again?
And, could you tell me if is there any specification about the phone we should know?
Click to expand...
Click to collapse
Sorry, the old site removed my file... now, you can download forever =)
New link to download:
NEW_LINK
Hellmetal666 said:
Hi there, @heitor.mejias File is still missing. Will you upload it again?
And, could you tell me if is there any specification about the phone we should know?
Click to expand...
Click to collapse
Sorry, the old site removed my file... now, you can download forever =)
New link to download:
NEW_LINK
Hello all, just head over to motostockrom.com, there's plenty of different versions to download both android 9 and 10. Just recovered mine when i lost touch in twrp. Same as above just run .bat file in Windows, easy
Hello, someone can help me? I need this file, someone still have it? Or know somewhere else I can download it
NickSimer said:
Hello, someone can help me? I need this file, someone still have it? Or know somewhere else I can download it
Click to expand...
Click to collapse
I've just restored mine from this thread
https://forum.xda-developers.com/t/guide-relock-bootloader-should-work-in-all-versions.4057497/.
The one I used previously didn't relock bootloader and i couldn't lock it by fastboot either