{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***Disclamer I am not responsible for any damage you made to your device. You have been warned.***
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. Along with including some tweaks that I personally made.
crDroid Features
My Additions:
1. Wichaya8's GCam 8.1 - Thanks to @VortexHD for his GCam 8.1 Config
2. Swan Stable Kernel (Thanks to @AShiningRay)
Flashing Instructions:
Note: Your device must be rooted and have TWRP installed.
First time installation:
1. Wipe System, Data, Dalvik/ART Cache, and Cache (format data if your previous ROM was password protected)
2. Flash the ROM corresponding with your LG v20 variant
Note: If you chose to not use Gapps install the Gcam-Services-Provider app.
3. Reboot
Update installation:
1. Flash the ROM corresponding with your LG v20 variant
2. Wipe Davlik/ART Cache and Cache (optional)
Bugs/Issues
1. AOD causes the touchscreen to stop responding. You can workaround this by quickly clicking the power button twice. (fixed with 04-10-22)
2. Camera can crash from time to time requiring a reboot. Still crashes but a restart of the app fixes it. (04-10-2022)
3. No Wifi Calling, 5ghz hotspot or VoLTE (don't ask about it, it's unlikely to ever work as LG/Cell Carriers have locked down the VoLTE drivers)
4. Power Profiles currently don't work (removed; i don't think their necessary with Swan)
5. GAPPS "cannot communicate with google's servers" error. Microg has been added as a workaround. (04-15-2022) Gapps are now working. (06-23-2022)
6. Voice calls are not working
Downloads
Credits
@xxseva44 - Huge Thanks as my trees are based off of his
@AShiningRay
@cstark27
@Stealth1226
@lybxlpsv
@npjohnson
@tre123456
@VortexHD
Sources
Swan Stable Kernel
v20-Variants
v20-common
lge-common
msm8996-common
Vendor Files
Donation
If you can please consider donating.
Status:
Last Updated: 08-23-2022
Kernel Version: 3.18
Stable
GCam Config
For Best results an xml config for GCam is Highly recommended
1. Download the config attached to this thread.
2. Open File Manager and create a folder called GCam then inside that folder make another folder called Configs8.
3. Open GCam and double tap on the black area next to the shutter button and press restore.
4. Your Config is now selected and will become the default settings in GCam whenever you open the app.
How to pass SafteyNet
Within Magisk select "Systemless Hosts" to add the module
Enable "Enfore DenyList"
Select "Configure DenyList"
Tap the three dots in the top right corner and enable "Show System"
Find and Select "microG Services Core" then toggle "com.google.android.gms" and "com.google.android.gms.unstable"
Open the "microG Settings" app and test SafteyNet
Most apps requiring SafteyNet should now be working.
h990n
mnmtv said:
h990nView attachment 5572831
Click to expand...
Click to collapse
Try this, go here and download the latest swan kernel and try flashing it. That should fix it.
ROMSG said:
Reserved
Click to expand...
Click to collapse
Netflix working?
minhduongtrung said:
Netflix working?
Click to expand...
Click to collapse
Haven't tested it I believe you have to use some sort of modded APK but I'm not sure.
minhduongtrung said:
Netflix working?
Click to expand...
Click to collapse
Just tested it and sideloading the apk works even with magisk no mod needed.
Where can I download magisk?
mnmtv said:
Where can I download magisk?
Click to expand...
Click to collapse
GitHub - topjohnwu/Magisk: The Magic Mask for Android
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
Which GApps should i install in this ROM? it said "there was a problem communicating with Google Servers". i have installed Open GApps 11 ARM64 Stock Version, or do I still need to go back to nougat stock first in order to get the working Google Servers, LineageOS 18.1 is my previous ROM.
CYB1609 said:
Which GApps should i install in this ROM? it said "there was a problem communicating with Google Servers". i have installed Open GApps 11 ARM64 Stock Version, or do I still need to go back to nougat stock first in order to get the working Google Servers, LineageOS 18.1 is my previous ROM.
Click to expand...
Click to collapse
Typically larger gapps packages can cause issues try reflashing with nano
ROMSG said:
Typically larger gcam packages can cause issues try reflashing with nano
Click to expand...
Click to collapse
No luck, still not working...
CYB1609 said:
No luck, still not working...
Click to expand...
Click to collapse
I'm not sure than, I haven't been able to replicate the issue but I'll keep digging.
Couldn't connect to the network, try another network. I tried 4 different networks still not connecting. Install with Flamegapps.
minhduongtrung said:
Couldn't connect to the network, try another network. I tried 4 different networks still not connecting. Install with Flamegapps.
Click to expand...
Click to collapse
try to take a logcat when connecting to wifi
ROMSG said:
Haven't tested it I believe you have to use some sort of modded APK but I'm not sure.
Click to expand...
Click to collapse
Just update widevine. Using the modded netflix apk is a pain to setup. You can cherrypick the update from my trees.
minhduongtrung said:
Couldn't connect to the network, try another network. I tried 4 different networks still not connecting. Install with Flamegapps.
Click to expand...
Click to collapse
Try turning it off and back on when trying to connect. Wifi roaming sucks on the v20 on aosp.
xxseva44 said:
Just update widevine. Using the modded netflix apk is a pain to setup. You can cherrypick the update from my trees.
Click to expand...
Click to collapse
It's already working I tested with the stock apk and it plays with no issues.
(4-10-2022)
New buids are out!
Includes varias fixes
- Gcam stability improved
- AOD now working
- Issue causing a kernel crash on boot is now fixed
- April Patch isn't out yet for crDroid 7.16 i'll update to it as soon as possible
Note:
crDroid doesn't include a web browser be sure to install gapps or an apk to sideload your browser of choice
Related
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
DOWNLOAD GAPPS
First time installing crDroid to your Moto G5, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
You tell me
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
crDroid G+ community
Source Code: https://github.com/crdroidandroid
Device tree: https://github.com/Fedray/android_device_motorola_cedric/tree/lineage-16.0
Kernel: https://github.com/Sohamlad7/android_kernel_motorola_msm8937/tree/lineage-16.0
Vendor: https://github.com/Sohamlad7/android_vendor_motorola_cedric/tree/lineage-16.0
ROM OS Version: 9.0.0 Pie
Based On: LineageOS 16
Version Information
Status: Stable
Current Stable Version: 5.0
Stable Release Date: 2019-01-21
Last Edit Date: 2019-01-21
Changelog:
20/1/2019
-Initial build
biometric sensor working?
Screenshots?
Welcome back @Fedray ROM works flawlessly so far!
Joseph3546 said:
biometric sensor working?
Click to expand...
Click to collapse
Yes, of course, it works on every rom.
lucki1000 said:
Screenshots?
Click to expand...
Click to collapse
I will upload when I have time.
mrfrantastic said:
Welcome back @Fedray ROM works flawlessly so far!
Click to expand...
Click to collapse
Thanks Glad to hear that!
Fedray said:
Yes, of course, it works on every rom.
I will upload when I have time.
Thanks Glad to hear that!
Click to expand...
Click to collapse
Whats the chance to go offical with this ROM?
fedray back at it again with another stable rom, good to see you post something once in a while
Thanks for this ROM, I already relied on you worh on the Moto G, Fedray!
Any advice what to do if Quickstep launcher fc at startup? Wiping cache/dalvik is problematic because trwp can not decrypt the data partition. Btw: Does anybody usw a twrp version abel to decrypt it?
Did someone successfully managed to install Magisk? After I flash it, it always does not appear in Magisk Manager. Manager claims it is not installed and offer to do it, but this also does not work.
sambahb said:
Did someone successfully managed to install Magisk? After I flash it, it always does not appear in Magisk Manager. Manager claims it is not installed and offer to do it, but this also does not work.
Click to expand...
Click to collapse
Uninstall magisk install magisk start if app not in the list extract the zip and install the app manually, and if the app say additional setup needed install it again without uninstall.
lucki1000 said:
Uninstall magisk install magisk start if app not in the list extract the zip and install the app manually, and if the app say additional setup needed install it again without uninstall.
Click to expand...
Click to collapse
Is there a place, where this manually is described better? I am not sure, what you exactly mean.
sambahb said:
Is there a place, where this manually is described better? I am not sure, what you exactly mean.
Click to expand...
Click to collapse
Okay, you should uninstall magisk over TWRP then you install magisk via TWRP, then make a restart and boot into crdroid, if magisk app not avaible, then go to the magisk.zip and install manually the magisk.apk (who is in the zip) and if you get a report in the magisk app like this additional setup needed or similar you reboot into TWRP and install magisk again and reboot into crdroid that should work.
lucki1000 said:
Okay, you should uninstall magisk over TWRP then you install magisk via TWRP, then make a restart and boot into crdroid, if magisk app not avaible, then go to the magisk.zip and install manually the magisk.apk (who is in the zip) and if you get a report in the magisk app like this additional setup needed or similar you reboot into TWRP and install magisk again and reboot into crdroid that should work.
Click to expand...
Click to collapse
This is exactly what I did about 5 times. First I always had to install Magisk Manager manually because it was not available. After install Manager told me that Magisk is not installed and there is the possibility from within the app. Download worked, but installwise nothing happend. It looks like it does not event try
sambahb said:
This is exactly what I did about 5 times. First I always had to install Magisk Manager manually because it was not available. After install Manager told me that Magisk is not installed and there is the possibility from within the app. Download worked, but installwise nothing happend. It looks like it does not event try
Click to expand...
Click to collapse
You install it start system and if you get magisk is not installed then go again to TWRP and install magisk, (without uninstall or any wipe or something else only install magisk again) if this also not work ask in the magisk thread.
when I will get official built. This ROM is loving. please built official version as soon as possible. Thanks to developer.
Anyone else constantly experiencing system UI crashes?
Will there be an update to 5.1?
Thanks to the developer, great ROM!
Hi.
I have upgraded from crdroid 8 to this rom and losted biometric sensor.
It does not appear at Configurations, the Moto Actions configurations don't work for finger gestures.
It was working at previous crdroid version.
I did a clean install.
Any suggestion on how to make it work again?
Lrd-Nero said:
Anyone else constantly experiencing system UI crashes?
Will there be an update to 5.1?
Thanks to the developer, great ROM!
Click to expand...
Click to collapse
Same problem.
diogopetermann said:
Hi.
I have upgraded from crdroid 8 to this rom and losted biometric sensor.
It does not appear at Configurations, the Moto Actions configurations don't work for finger gestures.
It was working at previous crdroid version.
I did a clean install.
Any suggestion on how to make it work again?
Click to expand...
Click to collapse
Flash this using the TWRP to make your fingerprint work again: https://drive.google.com/file/d/1e_8alb2MFX7uXqjYZ7OruCCImbYIge1r/view
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Wiki for more details.
IMPORTANT NOTES:
1. If you use twrp it will ask if you want to install the twrp app. Make sure you tap "DO NOT INSTALL".
2. If you care about your stuff, make a backup in TWRP first, just in case. Transfer it to a pc, along with all your stuff in internal storage.
3. The newest vendor, radio, & bootloader img's are included in the rom zip, so no need to worry about flashing those manually.
4. Lineage comes with adb root that you can enable in developer options, but if you want root for apps, flash magisk in recovery (after renaming magisk.apk to magisk.zip). Just don't flash it during initial lineage install, as it's known to cause bootloop if you do.
Downloads:
marlin rom: https://download.lineageos.org/marlin
sailfish rom: https://download.lineageos.org/sailfish
gapps: (gapps are optional) link WARNING: Only use nano or pico because the system partition is too small on our device.
google fi gapps addon: if your carrier is Google Fi, flash this zip right after flashing the gapps zip. https://androidfilehost.com/?fid=8889791610682871038
Instructions:
FOR INITIAL INSTALL
marlin: https://wiki.lineageos.org/devices/marlin/install
sailfish: https://wiki.lineageos.org/devices/sailfish/install
FOR UPDATING
For normal updating from official 17.1 to a newer official 17.1, follow these steps:
marlin: https://wiki.lineageos.org/devices/marlin/update
sailfish: https://wiki.lineageos.org/devices/sailfish/update
Protip: Enable "Prioritize update process" in the Updater preferences to make it go faster
NOTE: If you're updating from my unofficial build to the official nightlies, follow steps here.
Alternative manual updating instructions:
1. boot into lineage recovery.
2. install rom zip.
3. if you use gapps or magisk, select the "reboot into recovery" option, then install those zips.
FOR UPGRADING (From official 16.0 to official 17.1, for example)
marlin: https://wiki.lineageos.org/devices/marlin/upgrade
sailfish: https://wiki.lineageos.org/devices/sailfish/upgrade
Changelog
marlin
sailfish
Bug reporting
https://wiki.lineageos.org/bugreport-howto.html
Source Code:
Marlin Device tree: https://github.com/LineageOS/android_device_google_marlin/tree/lineage-17.1
Sailfish Device tree: https://github.com/LineageOS/android_device_google_sailfish/tree/lineage-17.1
Kernel tree: https://github.com/LineageOS/android_kernel_google_marlin/tree/lineage-17.1
Vendor tree: https://github.com/TheMuppets/proprietary_vendor_google/tree/lineage-17.1
Credits:
Many thanks to my fellow LineageOS team members and all the contributors out there in the community. :good:
Android version: 10
Kernel version: 3.18.137
Status: Nightly
That's great! Does this have Google dialer included?
Thank you for your awesome work
Intriguing ?.
<Mod edit: Quoted OP removed>
A lot of Google's apps crushing , the rest is all good . I know is a beta so no complaints
Hello!! I installed this assembly, I liked it, but later can I switch to nightly assemblies from this assembly?
alin919 said:
A lot of Google's apps crushing , the rest is all good . I know is a beta so no complaints
Click to expand...
Click to collapse
I had that but it was because I also wiped system and cache. I reflashed stock and only wiped data and now Google apps work except for Gmail
Just reporting, I am not passing safety net
alin919 said:
A lot of Google's apps crushing , the rest is all good . I know is a beta so no complaints
Click to expand...
Click to collapse
Do you have Magisk installed? I removed Magisk and now all Google apps work
Zehlek said:
Do you have Magisk installed? I removed Magisk and now all Google apps work
Click to expand...
Click to collapse
I do now , but is weird ... now drive is working and calendar and gmail not ( second time installed clean and downloads the apps from playstore before got root )
Try this, it helped me
Zehlek said:
Just reporting, I am not passing safety net
Click to expand...
Click to collapse
This video helped me pass safety-net
https://youtu.be/8ATH032lIXs
An easy fix, for anyone with the gmail issue, you just have to go to settings->apps->gmail->permissions, and allow permissions to contacts and calendar.
EDIT: I'll try to figure out the issue of why gmail is not being granting permissions automatically, like it should.
But in the meantime, i'll just include gmail in my builds. That way it has that right permissions and just works like it should. If you don't want the app, you can just go to settings and disable it.
EDIT#2: New builds are available in first post. One notable feature that was added is, network traffic monitor in statusbar. :good:
Note: I don't have a sailfish so that build is untested, but it should work fine. Please someone give it a try and let us know if it's ok. Confirmed, it's working good on sailfish too.
razorloves said:
EDIT#2: New builds are available in first post. One notable feature that was added is, network traffic monitor in statusbar.
Note: I don't have a sailfish so that build is untested, but it should work fine. Please someone give it a try and let us know if it's ok. :good:
Click to expand...
Click to collapse
Incredible thanks!! I'll test this out
Is the system mounted r/w on this rom?
razorloves said:
An easy fix, for anyone with the gmail issue, you just have to go to settings->apps->gmail->permissions, and allow permissions to contacts and calendar.
EDIT: I'll try to figure out the issue of why gmail is not being granting permissions automatically, like it should.
But in the meantime, i'll just include gmail in my builds. That way it has that right permissions and just works like it should. If you don't want the app, you can just go to settings and disable it.
EDIT#2: New builds are available in first post. One notable feature that was added is, network traffic monitor in statusbar.
Note: I don't have a sailfish so that build is untested, but it should work fine. Please someone give it a try and let us know if it's ok. :good:
Click to expand...
Click to collapse
So far so good, I saw this that root is disabled, is there anyway to enable it without using Magisk?
cyberbandit1998 said:
Is the system mounted r/w on this rom?
Click to expand...
Click to collapse
ikr, it was read only on the stock rom, immediately went back to Los16 lol
so, it seems as if there are no real game-breaking issues out of the gate?? I'm looking forward to trying this later but was holding off for some more feedback, so far it seems to be pretty positive... one (stupid) question... After flashing this can you easily just flash back to a PIE rom if need be, or once you go Android 10 you can't go back?
yes you can
johnblundon said:
so, it seems as if there are no real game-breaking issues out of the gate?? I'm looking forward to trying this later but was holding off for some more feedback, so far it seems to be pretty positive... one (stupid) question... After flashing this can you easily just flash back to a PIE rom if need be, or once you go Android 10 you can't go back?
Click to expand...
Click to collapse
I have flashed stock pie from Android 10 a couple of times
Zehlek said:
So far so good, I saw this that root is disabled, is there anyway to enable it without using Magisk?
Click to expand...
Click to collapse
not yet. have to use magisk.
johnblundon said:
After flashing this can you easily just flash back to a PIE rom if need be
Click to expand...
Click to collapse
yep, i did it the other day. went from lineage 17 to 16, with just a data wipe. no issues.
So device personalization services app kept crashing so I uninstalled it
also trying to enable black theme in settings makes settings app crash
Also had the Gmail permission bug thanks for posting the fix ?
Also why was twrp overwritten by stock Google recovery ?
I didn't see a warning about that anywhere in op
Note I did a clean install wiped all partitions but internal storage in twrp 3.3.0.0 before flashing rom and then magisk zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
step 1: Unlock BL
step 2: Flash TWRP and format data
step 3 Flash ROM, Gapps and Magisk
step 4 Reboot
step 5 Done
Update installation:
step 1 Flash ROM
step 2 Reboot
Do not wipe anything
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Kernel sources
Download:
S9+: https://sourceforge.net/projects/crdroid/files/star2lte/7.x/
S9: https://sourceforge.net/projects/crdroid/files/starlte/7.x/
Note 9: https://sourceforge.net/projects/crdroid/files/crownlte/7.x/
Changelog (S9): https://raw.githubusercontent.com/c..._vendor_crDroidOTA/11.0/changelog_starlte.txt
Changelog(S9+) https://raw.githubusercontent.com/c...vendor_crDroidOTA/11.0/changelog_star2lte.txt
Changelog(Note 9): https://raw.githubusercontent.com/c...vendor_crDroidOTA/11.0/changelog_crownlte.txt
Known issues:
voLTE, Samsung proprietary apps, Screen Mirroring
Visit official website @ crDroid.net
crDroid S9/+/Note 9 Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Safetynet fix:
1. After booting up, go to Magisk Manager>settings and enable MagiskHide. Also hide Magisk Manager.
2. From the modules section, download BusyBox and HideProps module
3. Enable Developer settings and inside that, enable local terminal.
4. Reboot your phone
5. Enter the terminal app and type su. Then grant it root permission.
6. Type 'props' then '1' and then 'f'
7. From the menu, go to Samsung, then choose your device, confirm and reboot.
8. Your safetynet should pass and device should show certified. If it doesn't, wipe data for Google play services, Google play store and reboot.
.
Changelog:
29-12-2020 : Initial release
31-12-2020 : F2FS support added [Stock Kernel doesn't support it so you need a custom kernel with f2fs filesystem supported]
nilaysriv said:
View attachment 5170981
Click to expand...
Click to collapse
Flashed and loving it, remind me of EvoX ROM. For working in progress, this rom has enough setting to customize. Since xposed is not yet available, a handful of xposed settings are covered internally. Just a suggestion tho, maybe next built can add long press to show power options, instead of using button.
Thank you for your excellent job, looking forward for official release.
31-12-2020
Added F2FS support
Download:
Release 31-12-2020 · nilaysriv/crdroid-builds
Added F2FS Support
github.com
Why the extension of zip is .bin?
Mynouddin said:
Why the extension of zip is .bin?
Click to expand...
Click to collapse
First I was surprised too, then I just renamed the file to .zip, and flashed it.
nilaysriv said:
Safetynet fix:
1. After booting up, go to Magisk Manager>settings and enable MagiskHide. Also hide Magisk Manager.
2. From the modules section, download BusyBox and HideProps module
3. Enable Developer settings and inside that, enable local terminal.
4. Reboot your phone
5. Enter the terminal app and type su. Then grant it root permission.
6. Type 'props' then '1' and then 'f'
7. From the menu, go to Samsung, then choose your device, confirm and reboot.
8. Your safetynet should pass and device should show certified. If it doesn't, wipe data for Google play services, Google play store and reboot.
.View attachment 5170997View attachment 5171001
Changelog:
29-12-2020 : Initial release
31-12-2020 : F2FS support added [Stock Kernel doesn't support it so you need a custom kernel with f2fs filesystem supported]
Click to expand...
Click to collapse
Can I use 2 SIM cards for the N version?
Hello
Thank you for the rom .. really enjoying it I had a couple of questions
First. Is it possible to delete some apps like the stock browser and calendar .. what about AudioFX since it's causing some problems with V4A , I can't seem to disable them also ..
Second. Will we get any options for Recents soon ?
Thanks again
doesn't recognize sim card on note 9 n960f tried both slots
edit: apparently IMEI got wiped
secure folder ???
KBJ911 said:
secure folder ???
Click to expand...
Click to collapse
As far as I know it will work on stock samsung roms only.
KBJ911 said:
secure folder ???
Click to expand...
Click to collapse
Use alternative like shelter. Search on google
Very smooth ROM Thanks!
Camera is a little glitchy though
there are some problem in crdroid settings its glitchy
Does anyone else encounter the homescreen wallpaper jumping/stutters when swiping out of an app using the gesture navigation? Its like the wallpaper zooms in when I swipe home out of an app. I've tried using different launchers but get the same result. It seems to happen with all Android 11 roms for some reason where as A10 roms are fine.
cant seem to install gcam 5.1. please help
Has the development of this rom abandoned, or simply hibernating?
Still maintaining this? No updates in weeks
Does this rom support VoLte and VoWifi?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
SHRP(recovery) (Download from here)
gapps (Download from here)
Magisk 23.0 or newer for root (after first boot) - (Download from here)
[*]IMEI-BACKUP-SCRIPT (Download from here)
[*]FIRMWARE (Download from here)
#KEEP IMEI BACKUP IN SAFE PLACE, ITS IMPOSSIBLE TO COMPLETELY RESTORE IMEI IF LOST!
Confused About merlinx? Read More About it (HERE)
Read (THIS) If You Have Issues With Dialer App
First time installation:
step 0: Make Sure You Have IMEI Backup, Take From link above
step 1 : Assuming You Have Your Bootloader Unlocked Already, Go to fastboot mode, Flash recovery(shrp in this case)
step 2: Reboot To Recovery, Format Dalvik, Art Cache And Cache, Click on format data --> type yes
step 3: Flash Your Device FW(skip if on MIUI Android 11), then Flash crDroidAndroid Zip
step 4: Flash The Suggested Gapps Package(optional)
step 5: If you want magisk, flash after you've setup the phone from the setup wizard
Update installation:
step 1: If You're On Non-OSS rom, Or OSS-Q rom, Follow "First Time Installation" Guide
step 2: First Unroot Your Device!(**IMPORTANT**), Now Assuming Youre on OSS-R Rom, or an Old Crdroid Build, Reboot To Recovery, Format Dalvik, Art Cache And Cache
step 3: Flash crDroidAndroid Zip
step 4: Flash The Suggested Gapps Package(optional)
step 5: If you want magisk, flash after you've setup the phone from the setup wizard
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM Download-Link
Changelog: Changelog
Visit official website @ crDroid.net
Support Group(Telegram)
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Thank you very much for contribution
Thank you so much
Latest CrDroid 7.10
1. Notification from DownloadProvider as Snoozed forever by default, can you fix this?
2. And Dialer Kaspersky still crash only on this ROM
Video-proof:
1. https://drive.google.com/file/d/163jYu5DArG9jCt07htR0ioI7e6OGs0SR/view?usp=drivesdk
2. https://drive.google.com/file/d/165zJmyAi34DLhanoUtrIDxzOqcS4ucmL/view?usp=drivesdk
Very nice ROM! Does official mean it will get OTA updates?
Hello, first of all thank you for you work. I have installed crDroid 7.10 (2021-09-12) on my note 9. It works very well I have only an issue with the camera. After the installation no camera app was installed. I have tried different g cam apps from (https://www.celsoazevedo.com/files/android/google-camera/) but i haven't found an app with working video und camera.
Which camera app should I use or what would be the default camera app?
Just got an OTA update for this ROM, Thanks for your work!
mobil73 said:
Hello, first of all thank you for you work. I have installed crDroid 7.10 (2021-09-12) on my note 9. It works very well I have only an issue with the camera. After the installation no camera app was installed. I have tried different g cam apps from (https://www.celsoazevedo.com/files/android/google-camera/) but i haven't found an app with working video und camera.
Which camera app should I use or what would be the default camera app?
Click to expand...
Click to collapse
- Here is working Gcam with my config file Nightmode,astrophotography,Video and slowmotion working
Gcam Note9.zip
drive.google.com
- Here is ANXcamera (Miui stock) magisk module fully workig all cameras like miui
MOD EDIT: Link Removed
Version 185R TESTED
FM RADIO Crash on V7.11
kpattas said:
- Here is working Gcam with my config file Nightmode,astrophotography,Video and slowmotion working
Gcam Note9.zip
drive.google.com
- Here is ANXcamera (Miui stock) magisk module fully workig all cameras like miui
MOD EDIT: Link Removed
Version 185R TESTED
Click to expand...
Click to collapse
Thank you very much. The ANXCamera 190R BountifulDistantHapuka works with alle four cameras. Your gcam works but only with the main camera.
FoxVol said:
Latest CrDroid 7.10
1. Notification from DownloadProvider as Snoozed forever by default, can you fix this?
2. And Dialer Kaspersky still crash only on this ROM
Video-proof:
1. https://drive.google.com/file/d/163jYu5DArG9jCt07htR0ioI7e6OGs0SR/view?usp=drivesdk
2. https://drive.google.com/file/d/165zJmyAi34DLhanoUtrIDxzOqcS4ucmL/view?usp=drivesdk
Click to expand...
Click to collapse
have you manually gave the correct permissions to the apps?
Does it work on note 9 global version?
TheOneJay said:
Does it work on note 9 global version?
Click to expand...
Click to collapse
Yes, no problem. Flash latest global firmware, then flash shrp recovery and follow OP guide.
I'm on V12.5.2.0.RJOMIXM.
Will this be getting android 12 upgrade?
if I have Pixel Experience and TWRP, can I switch to CRDroid with this?
Osornio98 said:
if I have Pixel Experience and TWRP, can I switch to CRDroid with this?
Click to expand...
Click to collapse
yes, format data (you should have to type yes to confirm), then wipe davlik art and cache. Then flash firmware zip, flash crdroid and flash gapps(if you want them-link is in OP's instructions).
Does anyone knows why I can't have Volte or vowifi even though it is enabled? I used to have one when I am still on Stock Firmware.
I am unable to activate google assistant. When I try to enable "hey google" it says this feature is currently unavailable on this device.
Lurxs said:
I am unable to activate google assistant. When I try to enable "hey google" it says this feature is currently unavailable on this device.View attachment 5480449
Click to expand...
Click to collapse
Hey google requires hotword blobs, so if they are not included in the rom then it will not work
New Hotword blobs on Android 11 · Issue #19 · ShivamKumarJha/android_tools
Hotword functionality requires the following files on Android 11 system_ext/etc/permissions/com.android.hotwordenrollment.common.util.xml system_ext/framework/com.android.hotwordenrollment.common.u...
github.com
uhala_rio said:
Does anyone knows why I can't have Volte or vowifi even though it is enabled? I used to have one when I am still on Stock Firmware.
Click to expand...
Click to collapse
did you flash the latest MIUI firmware? you can find it here https://forum.xda-developers.com/t/...-4g-redmi-note-9-merlin-auto-updated.4250261/
If I was you I would full format the device (you should have to type yes), then flash the firmware zip, then flash crdroid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 19.1
lineage-19.1-20220919-UNOFFICIAL-shamu.zip
lineage-19.1-20220715-UNOFFICIAL-shamu.zip
MigrationBuild.zip
Installation note: For the July update I've switched from signing with public keys to private keys to improve security. If you're upgrading from the May or June update to the July update or newer then you should first install the migration build, reboot and let LineageOS boot up, and then install the new version.
What works:
- Almost everything, including VoLTE
Known issues:
Device tree and kernel sources can be found on my github: https://github.com/rootfan
Thanks to:
- LineageOS team
- Elektroschmock, npjohnson, and anyone else who has worked on shamu in the past
- followmsi for the work on flo / deb. It was very helpful.
- abhishekt295 and wavedashdoc for getting IMS to work on android 10
- rINanDO for the netd reverts
Standard disclaimer: You're responsible for what you do to your devices, so don't blame anyone else if something goes wrong.
Enjoy android 12 on the Nexus 6
Thanks for this major update. What G-apps do you recommend? if possible a link please.
pinakini said:
Thanks for this major update. What G-apps do you recommend? if possible a link please.
Click to expand...
Click to collapse
I used MindTheGapps, haven't got any issues installing via TWRP.
So far haven't encountered any major issues except the UI being choppy and sometimes UI elements flicker. Will run it for a couple of days and see if it's worth it.
Bluetooth can't open
Which version of TWRP is needed to flash the rom? https://dl.twrp.me/shamu/ ?
I am currently running on lineage recovery 18.1 something. Can this be flashed on lineage recovery 18.1.** ??
Hi! Thank you for you hard work for our shamu!
Noice
1. Bluetooth works fine.
2. Flashed with orangefox and works fine.
Only bug is flashing graphics/vsync as far as I can tell and if you lower res to 720p it's actually very swift for a 8yo phone with its 7th android update.
As I don't use shamu as daily I cannot tell if ril stuff is functional.
hasitCN said:
Bluetooth works fine，is my problem
Click to expand...
Click to collapse
Wow it's amazing for shamu, android 12 is so smooth, hope you will realease new built or official built, thank so much
Great to see my old N6 running A12.
At the moment the only thing I can't get to work is double-tap-to-wake, despite it being enabled in Settings and in the kernel via Franco Kernel Manager. Does it work for anyone or am I maybe just missing something?
(Edit: I think it may have been the "Lift to check phone" option. I've turned it off and now DT2W seems to work.)
Credit and thanks to @rootfan.
gps location failed
rootfan said:
LineageOS 19.1
lineage-19.1-20220509-UNOFFICIAL-shamu.zip
Click to expand...
Click to collapse
Rom works great thank you does anyone have a link to another arm gapps a12 that works on this Rom? The gapps linked in this thread installs but I can't update apps or install new apps... So far only installing apks...tried clearing data and everything else I could think of...Google play services doesn't seem to be installing correctly Thank you
Magisk, and v4a are working
MindTheGapps-12.1.0-arm-20220416_173154.zip work for me. Play Store updates ok. I can't find the link from which I downloaded it but I can get it to you if you can't find it.
Edit: https://androidfilehost.com/?w=files&flid=322935&sort_by=name&sort_dir=ASC
dahawthorne said:
MindTheGapps-12.1.0-arm-20220416_173154.zip work for me. Play Store updates ok. I can't find the link from which I downloaded it but I can get it to you if you can't find it.
Edit: https://androidfilehost.com/?w=files&flid=322935&sort_by=name&sort_dir=ASC
Click to expand...
Click to collapse
Thnx for the link I tried formatting data with twrp and that fixed my play store issues
And make sure you back everything up, formatting data wiped my internal storage and files
dahawthorne said:
MindTheGapps-12.1.0-arm-20220416_173154.zip work for me. Play Store updates ok. I can't find the link from which I downloaded it but I can get it to you if you can't find it.
Edit: https://androidfilehost.com/?w=files&flid=322935&sort_by=name&sort_dir=ASC
Click to expand...
Click to collapse
This v4a is working on A12... Install the apk and Just toggle legacy mode and compatibility mode until you start to hear a difference
https://www.dropbox.com/s/b0th2nvkbcu9nre/viper 4 android.apk?dl=0
And make sure you back everything up, formatting data wiped my internal storage and files
WoW ! Thank you so much for this rom . A12 for shamu is a new life for it !
One question .. face unlock isn't available in this rom yes? Any way to enable it ? I remember in the days of pie there was a zip to enable it.
This is great news. Awesome
hasitCN said:
gps location failed
Click to expand...
Click to collapse
Where you ever able to solve your GPS location issue?
New build 2022-6-12:
Updated with the latest LineageOS changes including the June security update
Firewall / data monitoring appear to be functional thanks to rINanDO's netd reverts
Ims (VoLTE) is working again
The GPS problem should be fixed
rootfan said:
New build 2022-6-12:
Updated with the latest LineageOS changes including the June security update
Firewall / data monitoring appear to be functional thanks to rINanDO's netd reverts
Ims (VoLTE) is working again
The GPS problem should be fixed
Click to expand...
Click to collapse
Did you say VoLTE is working???. OMG!!!, the Nexus gods have spoken
rootfan said:
New build 2022-6-12:
Updated with the latest LineageOS changes including the June security update
Firewall / data monitoring appear to be functional thanks to rINanDO's netd reverts
Ims (VoLTE) is working again
The GPS problem should be fixed
Click to expand...
Click to collapse
Would you please push all commits needed for lineage-19.1 to compile to your repo?