Hello!
I don't think this question needs much information about my phone, so I'll just say:
I live in Europe, Poland. My model is: Rmx2170; I wanted to install a Custom ROM (Evolution X), but it requires android 11.
I was searching for quite a long time and still haven't found any WORKING Android 11, RUI 2.0 Firmware. And I came here to ask:
Does anyone have any of these / Know where I could get it?
Thanks
I found this file there.
Sadly, when installing the ROM on the recovery screen, I get this error:
Code:
Updater process ended with ERROR: 1
Error installing ZIP file '/external_sd/RMX2170_11_C.29.zip'
And with ADB & Sideload, I get this error:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb sideload C:\Users\Jacob\Downloads\RMX2170_11_C.29.zip
adb: failed to read command: No error
Things I did, Recovery I used:
The Recovery Screen I used (the newest version on the page)
(starting from a device with only the recovery screen and no system)
So, first I Formatted Data and Wiped: Dalvik / Art Cache, Data and Cache just to be sure.
Then I tried to install the firmware that I posted above, using the recovery screen, and got this error:
Code:
Updater process ended with ERROR: 1
Error installing ZIP file '/external_sd/RMX2170_11_C.29.zip'
Then I wiped: Dalvik / Art Cache, Data and Cache again and tried to install it via. Sideload:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb sideload C:\Users\Jacob\Downloads\RMX2170_11_C.29.zip
and got this error:
ADB: failed to read command: No error
Then I did the same stuff, but with one difference:
After every wipe, I would boot into the system and wait until it downloads (until I would see the language selection screen)
BUT I got the same errors...
By "wipe" I meant: Formatting data, and then wiping: Dalvik / Art Cache, Data and Cache.
My device:
Model: RMX2170
Last Used ROM: Android 10, RUI 2.0, Realme 7 Pro Firmware, I forgot the exact version.
Custom Recovery Screen (the latest on that site)
Trying to install: This Firmware (RUI 2.0), Android 11 (RMX2170_11_C.29.zip)
Does anyone know what could be causing this/ how to fix it?
JacobBoi_ said:
I found this file there.
Click to expand...
Click to collapse
Before someone smarter replies, try installing C20 (RMX2170PU_11_OTA_c20.zip). I call it a starter for custom 11 installations.
Also don't forget to flash vbmeta.img and patched_boot.img, you can find them on the telegram channel.
deserted said:
Before someone smarter replies, try installing C20 (RMX2170PU_11_OTA_c20.zip). I call it a starter for custom 11 installations.
Also don't forget to flash vbmeta.img and patched_boot.img, you can find them on the telegram channel.
Click to expand...
Click to collapse
Eh, I wanted to have the European version
But you can't have everything in life, I guess.
(I did NOT flash patched_boot.img because it corrupted my stuff)
(Also, I am not sure did I do the vbmeta.img thingie. I forgot, sorry.)
Nonetheless, the RMX2170PU_11_OTA_c20.zip works like a charm.
Thanks!
deserted said:
Before someone smarter replies, try installing C20 (RMX2170PU_11_OTA_c20.zip). I call it a starter for custom 11 installations.
Also don't forget to flash vbmeta.img and patched_boot.img, you can find them on the telegram channel.
Click to expand...
Click to collapse
Where could I find the download link of RMX2170PU_11_OTA_c20.zip?? please thank you
redeemer01 said:
Where could I find the download link of RMX2170PU_11_OTA_c20.zip?? please thank you
Click to expand...
Click to collapse
https://true-mirror-69.gitsauraj.workers.dev/0:/RMX2170PU_11_OTA_c20.zip
Can somebody help me with RUI3 WHERE to download ozip or zip??
Related
Hi,
I'm trying to migrate from CM 14.1 to LineageOS 14.1 official nightly on a OnePlus 3.
Here is what I currently have on the phone:
TWRP version 3.0.3-0
CM 14.1 nightly: cm-14.1-20161216-NIGHTLY-oneplus3.zip
OpenGapps: open_gapps-arm64-7.1-nano-20170211.zip
I'm doing the following:
1.) Reboot to recovery (to TWRP).
2.) Wipe everything (cache, system, data, Dalvik cache).
3.) Select in TWRP: Advanced -> ADB Sideload
4.) From computer: adb sideload lineage-14.1-20170207-nightly-oneplus3-signed.zip
5.) Here's what TWRP complains about:
...
Installing zip file '/sideload/package.zip'
Comparing TZ version TZ.BF.4.0.1-76917 to TZ.BF.4.0.1-00287.2
assert failed: oppo.verify_trustzone("TZ.BF.4.0.1-76917") == "1"
Updater process ended with ERROR: 7
Any clues on why that error shows up?
Thanks!
Has anybody else encountered this problem?
Can anyone help me please?
Hi,
Had this problem migrating from dev cm13->los14.1 this morning.
Seems like your firmware is not to the correct version. Install OxygenOS 4.0.2 (maybe 4.0.3 is working) first, maybe you'll need to flash the OxygenOS recovery first.
Then, boot at least once to the system (might be slow), then start again the process to install Lineage
Good luck!
You need to do following in the below order.
1. Flash official twrp 3.0.4 from fastboot command
2. Format complete internal storage in twrp, this will delete all user data, so make a backup.
3. Transfer all below files to internal storage in MTP mode in twrp.
4. Flash OxygenOS 4.0.3 firmware and modem zip
5. Flash lineageos 1402 nightly
6. Flash opengapps arm64 of ur choice
7. Boot and enjoy
nitz2889 said:
You need to do following in the below order.
1. Flash official twrp 3.0.4 from fastboot command
2. Format complete internal storage in twrp, this will delete all user data, so make a backup.
3. Transfer all below files to internal storage in MTP mode in twrp.
4. Flash OxygenOS 4.0.3 firmware and modem zip
5. Flash lineageos 1402 nightly
6. Flash opengapps arm64 of ur choice
7. Boot and enjoy
Click to expand...
Click to collapse
I could only find TWRP 3.0.3-0 on the official TWRP site: https://dl.twrp.me/oneplus3/
Is there somewhere else where I could get 3.0.4 from?
Also, where can I get modem.zip from?
Thank you!
Use twrp from, https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391.
And firmware and modem from, https://www.androidfilehost.com/?fid=673368273298930071.
Hit thanks if it helps
nitz2889 said:
Use twrp from, https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391.
And firmware and modem from, https://www.androidfilehost.com/?fid=673368273298930071.
Hit thanks if it helps
Click to expand...
Click to collapse
Thanks! I'll give it a try and come back with a reply on how it went.
Worked just fine. Thank you again!
MatrixInside said:
Worked just fine. Thank you again!
Click to expand...
Click to collapse
Welcome mate. Can u please tell me if slow motion working in lineageos default snap camera??
Mine force closes the camera app.
Hi all,
i got a quick question.
I recently got my Honor 9 (STF-L09) and tried to get the linage rom to work.
In the process i wiped /vendor with TWRP. (without backing up the original)
I tried to flash the provided vendor.zip which resulted in the Following Error:
Code:
[COLOR="Red"]Zip file is corrupt![/COLOR]
which i "solved" by extracting the .img and exectuting the following command in the shell:
Code:
dd if=/sdcard/TWRP/vendor.img of=/dev/block/bootdevice/by-name/vendor_a
now if i try flashing the linage.zip i get the following Error:
Code:
E3004: This package is for device: hi3660,stf; this device is duk.
[COLOR="red"]Updater process ended with ERROR: 7
.[/COLOR]
Q: Is there a way to get this fixed or at least go back?
any help would be appreciated.
also, if this isn't the right place for this post, please kindly point out where to post this.
I'm with the same problem as you, have you solved it?
cass14 said:
I'm with the same problem as you, have you solved it?
Click to expand...
Click to collapse
Hi,
i am at work at the moment.
Unfortunately i haven't solved this jet.
Tonight i'll look for the stock vendor.img and try to flash that.
Then see where this gets us.
we're gonna solve this my friend.
If you can still enter Fastboot and TWRP you could try flashing the original ROM with this. In the update packages is also a vendor.img which you could extract with the Huawei Update Extractor.
Hello,
I was wondering if some could help me please. I wanted to flash RR Rom 6.0 on my BLA-L09(I think that what's it is) phone.
I was able to unlock my boot loader, and flash TWRP my device but my dumb s*** flashed TWRP to my file system use FLASH SYSTEM instead of FLASH RECOVERY. Now, I can't fix it ?. I know I can use sideload so I'm not panicking just yet however I know I messed up the file system.
Could someone tell me what file system system I should be using (fat, exfat, ext4, etc...) and what to do to get this think to boot backup.?
I've tried and side loading "update_full_BLA-L29_hw_la.zip" stock ROM but no luck... I keep getting this error message:
"check_write_data_to_partition,write data error
Update_huawei_pkg_from_ota_zip: update package from zip failed
Updated process ended with error: 9"
HELP.!!!
me too..... following searching for a solution
Shandroid_94 said:
me too..... following searching for a solution
Click to expand...
Click to collapse
If you find anything, let me know.!
Just boot to fastboot, flash RR to system and TWRP to recovery_ramdisk?
[GUIDE] UNBRICK POCO X2/ REDMI K30 after flash with TWRP /0MB memory
Things You Need To Get Started
1. A Computer With Adb Tools Installed
2. Some Patience
3. Works only on phones with unlocked bootloader
Let's start.
1. install ADB/Fastboot
https://developer.android.com/studio/releases/platform-tools
2. download FASTBOOT ROM
http://file.sakshieducations.com/poco-x2-flash-file/
3. unzip 2 times unzip the rom twice with 7zip
4. move the folder with the rom inside to partition ,,D " .Don't leave it on DESKTOP on , several computers / laptops have encountered problems with MIFLASH.
5. go to unziped rom and EDIT
6. open MIFLASH and go to the rom and select
7. select clean all as in picture and flash all bat
8. turn phone in to FASTBOOT AND CONNECT TO THE LAPTOP/DESKTOP
9. refresh in MIFLASH
10. wait until is finish, don't be scared if it gives you an error at the end, the error is that it can't lock the bootloader. The phone is ready in perfect working order
MOD EDIT: Telegram/Whatsapp link removed, please read the STICKY!
link https://www.youtube.com/watch?v=18GRfPxSdAs&ab_channel=DragosMihai
You should fix the ADB link, the ADB provided in that link is outdated. Even the author of that post suggested not using it. Go here: https://developer.android.com/studio/releases/platform-tools
stuck on TWRP
Hello can anyone help me here, i am stuck on TWRP device POCO X2 INDIAN VERSION, I was on custom ROM i was flashing another rom through recovery while i try to flash any ROM IS GIVES ERROR (failed to mount '/system_root' no such file or directory failed to mount '/odm , WIPE DALVIK CACHE GIVES ERROR (failed to mount '/system_root' Invalid argument)
i tried flashing through fastboot gives anti roll back error
any help
thank you
Can you attach video with your problem and a video when you try to flash fastboot
Or I can help you with team viewer and let me try to flash your phone
KartikManish said:
Hello can anyone help me here, i am stuck on TWRP device POCO X2 INDIAN VERSION, I was on custom ROM i was flashing another rom through recovery while i try to flash any ROM IS GIVES ERROR (failed to mount '/system_root' no such file or directory failed to mount '/odm , WIPE DALVIK CACHE GIVES ERROR (failed to mount '/system_root' Invalid argument)
i tried flashing through fastboot gives anti roll back error
any help
thank you
Click to expand...
Click to collapse
Move miflash tool to c drive and also put fastboot rom file in miflash folder
Thank you guys
Thank you so much guys i did managed to roll back to stock official miui firmware i had the wrong fastboot recovery downloaded did not know which one was correct tried different versions and one worked now i am official updated to Miui 12.
I am new to all this does anyone know if fastboot images for miui 12 for Poco x2 are out...?
I would like to try rooting and flashing custom roms again in few days.
hello guys, who can help me install miui 12 I rom, I installed the last twrp, I deleted the data partition, cache and dalvik and after the restart only the logo is lit, i changed from poco x2 rom to k30 rom and i have the same problem BOOT LOOP
KartikManish said:
Hello can anyone help me here, i am stuck on TWRP device POCO X2 INDIAN VERSION, I was on custom ROM i was flashing another rom through recovery while i try to flash any ROM IS GIVES ERROR (failed to mount '/system_root' no such file or directory failed to mount '/odm , WIPE DALVIK CACHE GIVES ERROR (failed to mount '/system_root' Invalid argument)
i tried flashing through fastboot gives anti roll back error
any help
thank you
Click to expand...
Click to collapse
Download the stable version on mi comunity by vpn download and flash change the name from phoneixin to phoneix
Hi everybody
I've got a problem...
Downloaded latest OTA update from "xiaomi.eu", agreed to install, the phone then rebooted in to fastboot mode and does nothing else.
Rebooted the phone with adb command "fastboot continue" and this went well...it rebooted the system.
Now every time i restart the phone it reboots in to fastboot mode and i have to "fastboot continue" again.
I am also not able to enter recovery because the phone always enters fastboot mode.
Reinstalled recovery (Twrp-3.4.2B_toco_by.alex.msk1407.img) via ADB succesfully, but when i "fastboot reboot recovery" it reboots back into fastboot.
I'm also not able to boot into EDL mode.
Any solution?
Thanks
"MI NOTE LITE 8GB/128GB" running "MIUI by xiaomi.eu 12.1.1 | Stable 12.1.1.0(RFNMIXM)
Hi, I 'm in the same case, same model, same version.
I investigated and I can provide more details to help the community to look where to get a match to lightning our lanterns.
I downloaded the last OTA from built-in updater then the device was trapped in fastboot loop.
Unable to reboot/boot with adb/fastboot commands, but able to flash, I tried with différents recoveries,whose the last TWRP (testing version) let us discover the "super partition" (need fastbootd implantation to see it) This is the new OTA update partitioning.
We have to set up the proper flags via adb to perform successfully the update , or cancel the update process to retrieve original partitioning (non-updating state).
The commons way to restore recovery/fastboot might don't work, because system/vendor partitions are hidden inside "super partition" so might result of unknown/doesn't exist partition.
I am still seeking (Android dev super partitioning) and I'll be back when I'll discovered more...
EDIT : Doublon ? Another thread is open
https://forum.xda-developers.com/t/...astboot-after-updating-to-android-11.4223957/
EDIT: many users had a similar issue.
Will try with any another GSI rom, downloading...
opposatto said:
Hi, I 'm in the same case, same model, same version, I investigated and I can provide more details to help the community which lantern to pickup.
I downloaded the last OTA from built-in updater then the device was trapped in fastboot loop.
Unable to reboot/boot with adb/fastboot commands, but able to flash, I tried with différents recoveries,whose the last TWRP (testing version) let us discover the "super partition" (need fastbootd implantation to see it) This is the new OTA update partitioning.
We have to set up the proper flags via adb to perform successfully the update , or cancel the update process to retrieve original partitioning (non-updating state).
The commons way to restore recovery/fastboot might don't work, because system/vendor partitions are hidden inside "super partition" so might result of unknown/doesn't exist partition.
I am still seeking (Android dev super partitioning) and I'll be back when I'll discovered more...
EDIT : Doublon ? Another thread is open
https://forum.xda-developers.com/t/...astboot-after-updating-to-android-11.4223957/
Click to expand...
Click to collapse
Thank you. I'll be for updates
salsaecoentros said:
Thank you. I'll be for updates
Click to expand...
Click to collapse
Looking around https://source.android.com/devices/tech/ota/dynamic_partitions/implement
opposatto said:
Looking around https://source.android.com/devices/tech/ota/dynamic_partitions/implement
Click to expand...
Click to collapse
EDIT : so here is the idea, not tried yet:
https://source.android.com/devices/tech/ota/dynamic_partitions/implement
Alex msk's twrp is not compatible with android 11. Use orangefox or pitchblack recovery.
Btw i would recommend not upgrading to android 11 at the moment. It has a lot of bugs.
ApexPrime said:
Alex msk's twrp is not compatible with android 11. Use orangefox or pitchblack recovery.
Click to expand...
Click to collapse
So that's the problem....didn't think about that.
Thanks...i Will try one of them and them get back to you.
Thanks
salsaecoentros said:
So that's the problem....didn't think about that.
Thanks...i Will try one of them and them get back to you.
Thanks
Click to expand...
Click to collapse
Hi...
Sorry for the late Replay.
So i did like you said and installed new twrp and...what do you know...ir worked like a charme. No more issues.
Thank you do much.