All of us knows that we upgraded to OxygenOS 12 stable or beta but OnePlus didn't given roll back package so who are stucked on OOS 12 can now downgrade using this process.
This is downgrade process by using relive dvd based MTK client Tutorial booted using Pendrive on window pc.
Remember to follow this you need some patience and flashing knowledge and risk of bricking device if u don't follow correctly.
If you cannot bear this in mind then please don't follow blindly
This process also works for eu regions if you flashed indian open beta oos12 file.
Windows based MTk client application is available and its very good option but for me it's not detecting the the device so I will create another tutorial soon using that tool.
Requirements:
1) PC with all fastboot ,adb drivers and mediatek vcom drivers installed
3) Pendrive or use separate partation on hard drive
4) download files given below
5) patience and some flashing knowledge is must
Download MTk client relive dvd:
https://androidfilehost.com/?fid=15664248565197177367
Mirror link:
https://drive.google.com/file/d/10OEw1d-Ul_96MuT3WxQ3iAHoPC4NhM_X/view?usp=sharing
How to flash relive dvd in pendrive using Rufus that tutorial can be found here:
Relock bootloader and get stock recovery oneplus nord 2 Indian/EU: works for any MTK device
Note: This process is shown for OnePlus Nord 2 and work for any MTK device just replace files as per your model you need to Serch for that) Credits @Raygen @TheWing After relocking bootloader you can do safety net pass check to confirm by...
forum.xda-developers.com
Download Oxygen OS 11 firmware backup choose latest as per your device model
Indian DN2101 EU DN2103 and PACMAN)
Extract and save to pc harddrive/relive dvd in PC/laptop
https://gist.github.com/Giovix92/c7e69123dbc51adf3f3a26f9c3c0208e#backup-zips-links
DOWNLOAD PRELOADER BIN FILE:
INDIAN (copy and save it to pc in separate folder)
https://drive.google.com/file/d/1E2yL8uJA7tubHHlqHKkHkJffcCUrllAl/view?usp=drivesdk
EU regions (unzip and take out bin file)
https://forum.xda-developers.com/attachments/preloaderdump_stock-zip.5597685/
Notes :
1)Keep one Harddrive on pc free of space above 30GB
2) you will loose all data so keep full backup
Disclaimer
I am not responsible for anything happens to your device your device your responsibility!
Steps:
A) Baking up the OOS 12 firmware and preloader
1) first keep your pc powered off
2) connect relivedvd iso pendrive and power on the pc and while booting repeatedly press boot menu key fo your pc model you will get about boot menu key info in google search
3)u will get boot menu from there select connected usb pendrive
4)now u will see mtk client relivedvd boot option select first one
5)phone will boot to xubuntu which is nothing but mtk client ready to go environment
6)Now go to file manager on dextop create backup folder to backup your current oos12 name it as you wish.
Remember create this folder in HDD which has more than 30gb space
7) create another folder to take backup of preloader of oos12 in same folder.
8)now trasfer extracted oos11 firmware in same hdd which has all images file.
9)now create seperate folder to save preloader of oos 11 and trasfer the boot1.bin( preloader file) in this folder which we have to flash later.
10)now open mtk client app which ia available on pc dextop
11) take phone in hand power off it, connect one end of usb cable to pc don't connect another end to phone first long press vol up+ down and connect phone to pc keep buttons pressed Until some connection activity of moving circle will be seen in mtk client
12) if it's seen immediately release the buttons now you gets read Partation tab in the mtk client
13)tap on read Partation and select the backup folder you created in hdd.
While selecting the hdd you need to go to computer>media> user there u see all hdd select the hdd where u placed the backup folder.
14) immediately after selecting the folder backup starts ,you will see progress bar at bar in mtk client this will take 25min or more out 2 hr as per your pc model
15)now you gets 100% notification after backup completion now go to flash partation tab and select read preloader
Now select the folder you created to save the preloader file and tap save button from to right corner.
Your preloader for oos12 will be get saves to pc
B) flagshing oos 11 firmware
1) Now go to write partation tab and tap select from directory button
And locate the extracted partation folder.
all paratations automatically gets settled to respective tab in mtk client.
Remember some partation are empty like nvdata, protect and persist don't worry still our device will work
2)tap write partation tab and flagshing starts once done you get 100% progress bar in mtk client.
3)now we need to falsh preloader go to flash tool tab now tap write preloader
Select the preloader from folder where u saves the downloaded from download section.
4)tap open tab from top right corner but this time nothing happens in progress bar and mtk client will gets freeze.
Don't worry our work has done here.
5)now remove usb cable from device and long press vol up+power
6) phone will boots to recovery there tap wipe and format data and your phone will boots to oos12
7) check about phone and see all things working or not like FP, CAMERA etc.
Very imp trouble shooting :
After falshing oos 11 firmware and when you boots if you gets corrupt boot image screen then long press vol up+down +power
Phone will boot to fastboot mode
Now open terminal app on dextop ( or use windows cmd if it's not detecting)
Then reboot back to fastboot type
Fastboot flashing unlock
Press vol up on phone
Now in terminal type fastboot reboot
hello there, i was following your tutorial but i have encountered into a major issue.
MTK Client is stuck at connection handshake error, retrying
i am using it MTK live cd 4 from the link you have provided. Phones get detected and nothing further from there, i have error going back to Bootloader ''the serial not match and fastboot verify fail'' and i cant downgrade my phone to OOS 11.
I have tried almost everything but its not letting me to connect it with MTK client
Try easier way : Click (new current method)
Related
Dear Developers,
I have Ainol Numy 3G AX9 P97.
But there is always adds are poping up and tablet using is quite difficult.
We need a custom ROM for it. (MIUI rom or any android custom rom)
We did not find any other ROM for it.
So if you have/know where can I found this then please give me link or if you have then please help me with this ROM.
Thanks in advance.
================================================================================================================================================================================================================================================
We have found one link but not Download links are are working now: 4pda.ru/forum/index.php
After flashing the tablet is not charging, does not turn on the computer is not detected. The solution for such bricks include:
1. Remove the back cover plate.
2. Turning off the power connector.
3. Unpack firmware somewhere on your computer.
4. Turn SP Flash Tool 5.14 and set the path to the file from a folder with MT6582_Android_scatter unpacked firmware (see para. 3)
5. Expose setting Format All + Download and hit Download.
6. Hold down the Volume + pressed connect the USB and wait until the flashing process will start. (The buttons do not go!)
7. As soon as you see a yellow band of interest on the firmware download, you can release the Volume + and wait for the end of the process.
8. After the firmware disable USB, connect the power connector of the battery and turn our device for verification.
9. Put the cover back.
As I said, flashing a site Ainol not work and leads to a brick (3 times sewed, 3 times okirpichil). I solved this problem by replacing preloader.bin of the new version on preloader.bin from the previous version, which is stitched without any problems, and then packed RABOCHUYUYU latest firmware for our tablet did re-initialization of memory + 2GB USRDATA (instead of 1 GB for applications will be allocated 2 GB and there is no fault with the lack of space). Spread the firmware for the members of the forum.
To flash mode Firmware Uprade through SP Flash Tool (for those who okirpichil: see. The instructions above)
Do not forget to make backup NVRAM!
Ainol_AX9_2014.09.05_2GB
Attached file SP_Flash_Tool_v5.1452.00.000.rar (24,67 MB) --> no link
Here CWM recovery for our animal. Put through Mtk Droid Tools.
Download CWM recovery
Attached file MtkDroidTools.rar (9.97 MB)
1. Turn the tablet in debug mode via USB. (Settings for developers)
2. Set the Root rights (Annex Framaroot to help)
3. Start the MTK Droid Tools, connect the USB cable to the plate.
4. Wait for the connection (in the corner of the box should be lit green), and your device must be recognized.
5. Go to the tab root, backup, recovery.
6. click on the button Recovery and Boot.
First, it prompts you to specify the path to the boot.img, but we we press Cancel, and then it asks you to specify the path to recovery.img and we specify the path to my file and hit ok.
7. Turn off the tablet and go in through rekaveri kombanatsiyu On. and Volume +
Attached file recovery.img (5,33 MB)
Please add information to the cap.
Hi all as the title suggests is there anyone who has a fairly detailed Unbricking guide or a way to reflash the stock meizu software via fastboot, QFIL or anything that has worked.
The current problem I face is I have the m6 note with Chinese firmware and wanted to flash global firmware via flash fire as the TWRP APK didn't work for me . I can't enter recovery and fastboot gives me a failed message (remote: partition flashing is not allowed ).
Thank you in advance
its for m3 but you may try http forum flymeos com/forum.php?mod=viewthread&tid=35810&highlight=unbrick
also this one for our phone http://forum flymeos.com/thread-38489-1-1.html
This one is from original flyme os forum FAQ
Q: Recover soft-Bricked device (for those can't access the system)
A: Access the Recovery mode:
1.Turn Off the Phone (ensure that you have more than 20% battery)
2.Press and Hold Volume UP + Power
3.release as soon as you see the Meizu logo
Download firmware from http://www.flymeos.com/firmware.html, Copy the update.zip (naming is important) on your phone and select System Upgrade + Clear Data. As soon as it's connected a "Recovery Drive" will pop up. Now, connect your phone (still in Recovery Mode) to your Windows PC. As soon as you are there, you are just fine.
hi thanks @consumimur , but the first method is for mediatek devices isn't it? The second method doesn't work for me at all because i can't enter my recovery , i need some sort of flashing too QFIL doesn't work for well at the the one i tried (2.0.0.5) as it ask for "Rawprogram.xml" and "patch* " which is not in the update.zip
Yusuf.T said:
hi thanks @consumimur , but the first method is for mediatek devices isn't it? The second method doesn't work for me at all because i can't enter my recovery , i need some sort of flashing too QFIL doesn't work for well at the the one i tried (2.0.0.5) as it ask for "Rawprogram.xml" and "patch* " which is not in the update.zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=843179&view=findpost&p=69341915
New https://www.movilesdualsim.com...oros/meizu-m6-note-sd625.1222/
Enviado desde mi M6 Note mediante Tapatalk
i think thats what you are looking for
https://firmwarefile.com/meizu-m6-note-m1721
Folks, today I've had the fortune to brick (corrupting the devinfo partition, screwing up recovery and OS boot as well) and unbrick (stock recovery and OS restored and working perfectly) my Meizu M6 Note without opening it up. If anyone is still interested, instructions are here:
https://forum.xda-developers.com/showpost.php?p=77964079
Hi, I have a problem with my m6 note. I have WIFI MAC address between 2: 00: 00: 00: 00: 00 and I can not turn on wifi. I found a solution to upload persist.img and this should help. However, I can not find the persist.img file anywhere. Can you help?
consumimur said:
This one is from original flyme os forum FAQ
Q: Recover soft-Bricked device (for those can't access the system)
A: Access the Recovery mode:
1.Turn Off the Phone (ensure that you have more than 20% battery)
2.Press and Hold Volume UP + Power
3.release as soon as you see the Meizu logo
Download firmware from http://www.flymeos.com/firmware.html, Copy the update.zip (naming is important) on your phone and select System Upgrade + Clear Data. As soon as it's connected a "Recovery Drive" will pop up. Now, connect your phone (still in Recovery Mode) to your Windows PC. As soon as you are there, you are just fine.
Click to expand...
Click to collapse
thank you so much for this @consumimur. It saved me from going down a rabbit hole, after getting a bootloop with meizu x8 m852h, having followed these instructions:
Meizu X8 - Обсуждение - 4PDA
Meizu X8 - Обсуждение, Смартфон, 6.2"
4pda.to
OP:
ttps://4pda.to/forum/index.php?showtopic=965227
author: 555frost555
Download (litter, files lost) archive and unpack to the root of the C drive
Charge your phone at least 50%
Disable signature verification using the following instructions:
For WINDOWS 7-8: Run Command Prompt as administrator, execute two commands in turn and reboot
Code:
bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
For WINDOWS 10: press start, hold shift, press shutdown computer. The computer will boot into a recovery screen. Select custom boot options and disable driver signature verification.
PS personally, I recommend installing on win7 or 8.1 - less haemorrhoids
Install QFIL
Install Qualcomm 9008 driver
Install standard drivers from the phone (connect to the computer in the CD-drive mode and install from there)
Run QFIL and select "flat build"
Select programmer: "prog_firehose_ddr.elf"
Select XML: "rawprogram0.xml"
Select XML: "patch0.xml"
Turn off the phone
Clamp VolUp + VolDn + Power
The Meizu icon appears, followed by a black screen. The keys can be released.
Connect your phone to your computer. It should be detected as Qualcomm 9008.
Press DOWNLOAD
QFIL is very moody about the system and drivers. If you did everything correctly, but you get an error while flashing, then you need to try it on another computer. Preferably on where windows was recently installed ...
When FINISH is written in QFIL, you can turn off the phone and restart it by holding down the power key until it vibrates.
For WINDOWS 7-8: Run Command Prompt as Administrator, execute two commands in turn and reboot
Code:
bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING OFF
I did this with the QFIL archive linked in https://4pda.to/forum/index.php?act=findpost&pid=88712568&anchor=Spoil-88712568-6
and received a bootloop on meizu x8 m852h. Then I did what @consumimur wrote
I did this on a windows 10 machine
I did this on a w10 machine
This is unbrick firmware. Enjoy free. Download Unbrick Meizu M6 firmware.
Hi everybody , today I will share very easy way to unbrick your Lenovo Vibe Shot Z90a40 device .
In my case this device was bricked while instaling custom twrp recovery and custom android 7 OS I got device in that state so the problem was that you are unable to flash your device in diagnostic 9006 mode with to many read only partitions , which I was unable to format or delete in read only state , but actually the problems was not it those partition at all, is about to get
HS-USB QDLoader 9008 mode so you can flash stock firmware on it .
Preparing Steps to do before we start :
1. Disable or remove your Antivirus (because sometimes antivirus can block instaling drivers , ports or running flash tool)
2. Uninstall all the previous drivers you used for flashing or unbrick use free tool called USBDeview
for 32 bit users:
https://www.nirsoft.net/utils/usbdeview.zip
for 64 bit users:
https://www.nirsoft.net/utils/usbdeview-x64.zip
3. Put your windows in Test mode
To put your Windows in test mode just Run As Administrator Command Prompt and insert one of the following command:
bcdedit -set testsigning on ( to enable test mode)
bcdedit -set testsigning off ( to disable test mode)
Or Disable driver signature
for Windows 7
https://www.youtube.com/watch?v=6gYhHD622AA
for Windows 10 users:
https://www.youtube.com/watch?v=71YAIw7_-kg
After that reboot your PC .
4. Uninstall all flash program from your pc like MiFlash , QPST , Qloader ...
Use Revo Uninstaller for advanced uninstaling that clean leftover files and registry which is stored inside your Windows registry.
https://www.revouninstaller.com/revo_uninstaller_free_download.html
After that reboot your PC .
5. Install Microsoft .NET Framework 4 download from here: (if you already have instaled skip this)
https://www.microsoft.com/en-us/download/details.aspx?id=17851
6. Install first right Qualcomn driver download from here :
https://drive.google.com/file/d/0B1Sms71Oe6FIdUE4em9DNjV3Y00/view
Credits for driver : https://www.youtube.com/channel/UC8LoQb68tjBYxwN97b4pvtA
7. Install Lenovo USB driver download from here :
https://lenovousbdriver.com/tutorial/install-lenovo-usb-driver
8. Install Qpst (Qfil flash tool) download from here:
https://drive.google.com/file/d/0B1Sms71Oe6FIVTRwbWpSdEZfM2c/view
9. Install Minimal ADB & Fastboot 1.4.2 command tool download from here
(while you start installing tool check to be in desktop is easy )
https://androidfilehost.com/?fid=745425885120698566
in order to install run ADB & Fastboot 1.4.2.exe with Administrator and just write y and hit enter for all .
10. Download twrp recovery for fastboot flashing and extract to Desktop, download from here :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
11. Download stock firmware for QPST Flashing ( inside is drivers and tools also but don't use that one's ) download from here :
https://cloud.mail.ru/public/HCn4/auVy8DVo1
Also extract stock recovery for later one inside adb folder
12. Very important is to use Original usb cable ! otherwise your device won't be recognized property!
13. Make sure your battery is charged if you are not sure put in charger for about 2 hours in charger on in pc!
If your device immediately show up Lenovo logo just hold Vol - and power button together release power button once is rebooting put keep holding Vol - it should be black screen now with white indicator while is charging if not , repeat this proces without charger. This is secure because if you let your phone to be charged with Lenovo logo device will be hot and probably the lcd will hot burning effect !!!
So Let's start
1. Make sure your device is OFF first !
2. Hold Vol + and Vol - buttons together in order to enter into FastBoot mode and hold it like that plug usb and see if windows is detecting your device then release buttons.
3. Now once the drivers are successfully installed run Minimal ADB & Fastboot tool .
4. Write command :
fastboot device and press Enter
(you should see your device available )
5. Now write :
fastboot flash recovery (drag inside command tool with mouse "recovery.img" extracted from stock recovery from preparing steps on 11.) and press Enter
6. Next write each command one by one :
fastboot erase cache and press Enter
fastboot erase system and press Enter
7. Now unplug your device from PC.
8. Enter to Lenovo stock recovery by holding 3 buttons :
Vol + & Vol - & Power button at the same time , release just power button once your device vibrate .
Once you see Lenovo MAIN MENU screen press on ''wipeuser data" and wipe each one ,
one by one :
fuse wipe data ( press on YES )
fuse format data ( press on YES )
wipe cache ( press on YES )
Now there is two method for fix :
#First method - Flashing ota firmware from stock recovery
This method is from forum.lenovo.com which doesn't work for me is fail at 49% probably because S208 is old version which is maybe not allowed because I flashed recovery from S363 firmware I don't know but you can try .
1. You need 4 gb or more micro SD card , also make sure is formatted with Fat 32 .
2. Download Z90a40_USR_S208_1507141216_Q2020131.4_ROW_OTAFull.zip, rename it to "update.zip"
https://drive.google.com/file/d/0B8CarqWdS9gZZmJmVGp6NkFWRlk/view
3. Copy it to micro SD card again 4 GB or more !
4. Go into recovery menu:
- turn off the phone
- hold both vol+ and vol- buttons
- power on phone, keep both vol+ and vol- keys pressed until it enters recovery
5. From recovery menu choose install update package
After that go back and press on "poweroff"
#Second method - Flashing stock firmware with Qfil
1. Hold Vol + & Vol - buttons and plug usb cable to enter into fastboot mode and open Minimal ADB & Fastboot to again .
2. Now to put your device in EDL mode and open HS-USB QDLoader 9008 for flashing write this command:
fastboot reboot edl and press Enter
Now you should see that your device is detected like "HS-USB QDLoader 9008" so wait for instalation of that driver.
If you are unable to reboot into EDL mode , flash twrp.img from "twrp/img" folder .
In order to flash twrp recovery probably you need to unlock bootloader , but try first without unlocking if is not flashing then unlock bootloader , if is flashing without unlocked bootloader skip this!
https://www.cyanogenmods.org/forums/topic/unlock-bootloader-android-phone-using-fastboot/
To do that just write :
fastboot flash recovery (drag inside command tool with mouse "twrp.img" from " twrp/img" folder ) and press Enter
3. Once is installed go to QPST directory in my case "C:\QPST\bin" and Run as Administrator "QFIL.exe."
.
Rest you have here here explained ...
https://www.gsmhelpful.com/2017/07/how-to-flash-lenovo-vibe-shot-z90a40-with-qfil-flash-tool.html
If for some reasons flashing is fail , plug usb in another usb port USB 2.0 (recommended) and repeat process.
DOWNGRADE from Marshmallow 6.0.1 to Lolipop 5.1
For those one's who want to downgrade device back to Lolipop try this at your own risk !!!
https://forums.lenovo.com/t5/K-and-...-downgrade-to-lollipop-5-1-GUIDE/td-p/3527835
Good luck and God bless you all
The files uploaded on tinyupload can't be downloaded, Lenovo USB driver and unbrick stock recovery & twrp recovery, the link expired.
Could you please upload them again?
Thank you!
Links is updated . Thank you for let me know ...
unfortunately, I tried to install magisk patched boot image by using following command when my device was in fastboot mode "fastboot flash boot magisk patched boot.img" using cmd, after that I entered "fastboot reboot" but my device hadn't rebooted, then I tried to switch it on manually but it just vibrated and showed nothing on screen, on trying to start it on fastboot or recovery mode, it does the same and shows nothing. On connecting it to pc it doesn't gets recognized by pc. On connecting to charger, it shows a white led in notification led panel. can you guys please help me! please answer me fast the solution! plzz plzz :cryinglzz!
ShubhAshutosh said:
unfortunately, I tried to install magisk patched boot image by using following command when my device was in fastboot mode "fastboot flash boot magisk patched boot.img" using cmd, after that I entered "fastboot reboot" but my device hadn't rebooted, then I tried to switch it on manually but it just vibrated and showed nothing on screen, on trying to start it on fastboot or recovery mode, it does the same and shows nothing. On connecting it to pc it doesn't gets recognized by pc. On connecting to charger, it shows a white led in notification led panel. can you guys please help me! please answer me fast the solution! plzz plzz :cryinglzz!
Click to expand...
Click to collapse
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
mottaM said:
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
Click to expand...
Click to collapse
Thank you very much @mottaM
Your solution saved my redmi 6a. I had some problems/errors while using spflash tool but after reinstalling drivers and changing the usb cable my problem sorted out.
Also, the new spflash tool is quite confusing for me so i used v5.2152
SP Flash Tool v5.2152 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.2152 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
mottaM said:
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
Click to expand...
Click to collapse
Thanks you very much!!
A hard brick is where your phone starts to bootloop but you cannot enter recovery nor fastboot. A hard brick is caused where you flashed a incompatible ROM/Recovery/Firmware,etc. If you ever hard bricked your phone then this thread can unbrick your phone. Any OS is supported. Linux, Mac and Windows. Now to get started, install this softwares:
SP Flash Tool
Python 3
Virtual Box (MacOS)
You also need knowledge in bash, python (I am not responsible if the steps did more damage than you hard bricking your device)
For users who's doing this guide in MacOS. Make a Windows 10 Virtual machine then download SP Flash tool in it. Download MTK Driver here in the Virtual Machine then run it.
And maybe sure to drain your phone's battery first before doing something.
After installing, download this link below (Code > Download ZIP):
Bypass (Bypasses MediaTek's Security inorder to flash)
Payloads (So that the bypass can work)
Download Stock ROM here then extract it. (For MacOS users, download it in the Virtual Machine.)
(Credits to the owners who made this scripts)
After downloading, unzip the 2 files and in the exploits_collection folder (Payloads), copy the two files and folder named "default_config.json5" and "payloads" then put it to the bypass_utility folder (Bypass). Once done, open terminal and type following:
pip install pyusb json5
Also for MacOS users, dont run it in the Virtual Machine you made or else it wont be recognized.
Run the script and just like i said you must drain the battery first or else it will error in SP Flash Tool. After running you will see a message that says "Waiting for device". Hold Volume Down then plug your phone (Volume Up or Volume Down+Up if not recognized) then you should see a message that says "Protection Disabled". DO NOT UNPLUG IT OR TOUCH IT
python main.py
If ur running in MacOS > Launch the Windows 10 Virtual Machine, open SP Flash Tool.
If ur running in Linux, Windows > Open SP Flash Tool
Open SP Flash Tool then go to Options in top left, go to Connection, press UART. If your phone is connected and bypassed, you should see a option in the selection COM. Then go back. Press Select in "Scatter Loading File", locate to the Stock ROM you downloaded then go to images. You should see a file named "Scatter" in the end of it then select it. The Flash Tool will read it then you can press download. It if succeed, you will see a checkmark window popped. Then reboot the phone. If you dont like the Stock ROM, fastboot is back again and you can flash anything you'd like. Any problem? Check out FAQ below
FAQ
1. When flashing, an error popped up saying STATUS_RAM_EXEPTION
You din't drained the phone's battery. If you did not, you have to wait a couple days. You can check if its drained by holding the power button.
2.I cannot detect my phone while bypassing.
Close VirtualBox or any softwares that is catching any USB devices.
3.Cannot find device in VirtualBox
Download the extension pack after downloading then go to VirtualBox, press ur Windows 10 Virtual Machine, press Settings in the top, go to Ports then USB then choose "USB 3.0". Press OK
4.I cannot find my question here
Comment down below.
Sorry for the wrong grammar i placed in this thread.