Install ADB on your computer (search internet to download and install, its easy)
Enable USB Debugging on your pone.
With your phone connected to ADB on your computer, copy and paste the following command into the terminal:
"adb shell settings put global ram_expand_size_list 0,1,2,4,6,8" (without quotes)
Reboot your phone.
Once it's switched back on, navigate to Settings > Battery and device care > Memory and open the RAM Plus menu.
Before running the command, you had the option to change how much virtual RAM you use, ranging from 2GB to 4GB.
Now you should see the option to set it anywhere from 0GB to 8GB or 16GB, depending on your device.
Choose 0GB from the list, and reboot your phone as prompted.
Once it's up and running, you should notice smoother animations, better-sustained performance, and a more consistent experience overall.
Your eMMC disk will live more years...
Now my phone runs much, much better, without lag. HURRA!!!
Nice find but I haven't had noticed any major lags, though few are there for that I was blaming SoC.
Thanks, I'll give it a try today and let you know if it does really make it smoother. I am currently experiencing some lags.
Hi, I am geting this message:
C:\Users\rodri\Desktop\platform-tools>adb shell settings put global ram_expand_size_list 0,1,2,4,6,8
* daemon not running; starting now at tcp:5037
* daemon started successfully
adb.exe: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
Are you on A12? Did you accept adb debug prompt on device
Abish4i said:
Are you on A12? Did you accept adb debug prompt on device
Click to expand...
Click to collapse
Never mind, I just had to remove the cable and plug it in again. Thanks anyways. However, it did not seem to have made any difference at all.
Could be placebo, but seems to be running better to me, thanks!
Since virtual RAM is BS so having our storage back is ++
On Galaxy F23/M23 Android 13 OneUI 5.1
adb shell settings put global ram_expand_size_list 0,1,2,4,6,8 - Doesn't work
After reboot still only two option 2/4 GB,
after command is applied it shows 0 1 2 4 6 8 -> select 6 then reboot => after reboot success still stick at 4GB no changes
Related
Currently I'm trying this guide:
Nook Tablet "One Click Root" + gapps ADB script
but I've been trying various guides all day. The drivers are there, debugging enabled, auto mount disabled, robot in the bottom corner but when I run ADB Devices, no dice. Anyone have any clues what the problem could be or atleast anyone else having this problem? At first I thought it might be because I was using a different USB cord but it still doesn't work even with the Nook cord
The problem you describe is almost guaranteed to be a problem on your computer and the driver installation.
For the folks here to help, they will need to know platform (PC or mac) and version of operating system.
If Windows, they will need to know how the device appears to Device manager. If it shows up as a disk drive - you will have to disconnect from the Nook side. ADB Composite should be good.
For either platform, confirm that adb_usb.ini is in the right place and modified correctly.
No, you're wrong dude above me.
OP: Run this in cmd prompt
Code:
echo 0x2080 > %username%\.android\adb_usb.ini
You need to have your nook tablet unplugged when you run that then you would see nook tablet in the device manager when you plug it back in.
Indirect said:
No, you're wrong dude above me.
OP: Run this in cmd prompt
Code:
echo 0x2080 > %username%\.android\adb_usb.ini
Click to expand...
Click to collapse
"Cannot find the path specified." But I can locate the file myself in that directory??
I'm running Windows 7 64-bit, device shows up as android phone>androud ADB interface.
My bad it's
Code:
echo 0x2080 > "%USERPROFILE%\.Android\adb_usb.ini
Check, still nothing in ADB, i did restart the server too. To be clear, the .ini file only has the "0x2080" line in it now, nothing else. I'm assuming that's ok because the other stuff was commented out anyway, am I right?
(thanks for your help! )
1) look in device manager now though, you need to install the drivers.
I still see it listed under android phone > android ADB interface and not mass storage or anything like that, you think that's still the problem though?
*Edit*
SUCCESS!! I uninstalled the "Android ADB Interface" and "Android Composite ADB Interface" appeared in its place!!(??) Whatever happened the device show up now. Thanks for the help and keep up the good work Indirect!
Indirect said:
My bad it's
Code:
echo 0x2080 > "%USERPROFILE%\.Android\adb_usb.ini
Click to expand...
Click to collapse
I was having problems seeing the Nook Tablet in adb devices, but this fixed it for me.
I was having the same issue for a bit, restarted my nook and it worked haha.
Sent from my BNTV250 using xda premium
This worked for me. Hopefully it helps.
While the nook is plugged in (mine showed the 2 "Disk Drives" and 2 Drive Letters under portable devices). Open Device Manager and delete/remove the 2 disk drives called "B&N NOOK Tablet USB Device" (this should also remove the weird drive letters under portable devices). Now go to Control Panel > Advanced System Settings > Hardware Tab > then click "Device Installation Settings". Change this setting to "No, let me choose what to do", and make sure "Never install driver software from Windows Update" is checked below that.
Now unplug and replug your NT, and you should now see an Android Composite device with the "!" next to it. You should now be able to install the custom drivers described in the other posts.
Essentially it seems windows is trying to "help" you by guessing at the drivers you want to use.
If this doesn't work, you can try to remove ALL android devices using the USBDeview Application that you can find http://www.androidsim.net/2009/08/how-to-1-how-to-install-usb-driver-on.html
I used USBDeview for the removal part just because I had a Kindle fire, HTC device, samsung device, all installed and I think they were fighting a little bit. I now have results from adb devices, and dare I say ROOT!?!?!
Hope this helps some of you!
Good post - Windows Vista especially, and Windows 7 somewhat, really think they know better than the user when it comes to drivers. Especially unsigned drivers in preference to signed ones...
I found that the best way to do this for people with this problem (such as me), is to go in Device Manager, expand the USB Mass Storage Device selection, search for the USB Mass Storage device of your Nook Tablet (easiest way would be to unplug any other external hd, sd card, ... so that there is only one USB Mass Storage device). At this point, right click and update driver and select the folder manually.
tsubus said:
I found that the best way to do this for people with this problem (such as me), is to go in Device Manager, expand the USB Mass Storage Device selection, search for the USB Mass Storage device of your Nook Tablet (easiest way would be to unplug any other external hd, sd card, ... so that there is only one USB Mass Storage device). At this point, right click and update driver and select the folder manually.
Click to expand...
Click to collapse
I just joined the forum to thank you! I spent hours looking for a solution and yours worked!
brices21 said:
While the nook is plugged in (mine showed the 2 "Disk Drives" and 2 Drive Letters under portable devices). Open Device Manager and delete/remove the 2 disk drives called "B&N NOOK Tablet USB Device" (this should also remove the weird drive letters under portable devices). Now go to Control Panel > Advanced System Settings > Hardware Tab > then click "Device Installation Settings". Change this setting to "No, let me choose what to do", and make sure "Never install driver software from Windows Update" is checked below that.!
Click to expand...
Click to collapse
Well I am stumped here, seriously. I can't get rid of the above mentioned 2 instances of "B&N NOOK Tablet USB Device" no matter what I do. Auto mount is off on the device and the device installation setting is already set to "No, let me choose what to do." Yet every time I plug the NT in- the computer kindly tells me it's "ready for use" and those two "B&N NOOK Tablet USB Device" listings are back. At this point I'm not sure I'm ever gonna be able to get the device to show up under ADB. The computer just won't seem to let it.
Any advice anyone might on this would be greatly, greatly appreciated.
maybe try what Indirect did here: http://forum.xda-developers.com/showthread.php?t=1363652
The website is below what I did to completely disable Windows from installing the Nook drivers every time it is plugged in. I also had the "Never install driver software from Windows Update" checked from Brices21's post but the drivers would still install everytime it is plugged in.
xxxx = http - still a noob, can't post links
yyy = www
xxxx://yyy.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
I never actually installed the USB drivers that indirect provided, but "adb devices" still detected the NT when plugged in.
This was my whole process to get "adb devices" to detect the NT:
With the NT plugged in and device manager detecting the 2 Nook devices as drives and 2 Nook devices in "other devices" and with automount disabled and USB debugging enabled
I also ran the runmefirst.bat at some point in time previously, so the necessary files were created already
***** Pulled this from the website above******
* Go to Start–>Search type in gpedit.msc
* Click the file to open the Local Group Policy Editor and show Windows who is in control!!
* You want to go here: Computer Configuration->Administrative Templates->System->Device Installation. Click on the subfolder Device Installation on the left and on the right side you will see the possible restrictions.
* Right Click on Prevent Installation of Devices not described by other policy settings and edit this option, set it on ENABLED.
*************************************
From here the website says to reboot and set the option back to default. I did not reboot or set the option back.
* Going back into device manager, I uninstalled the drivers for the 2 Nook drive devices.
* Unplugged the NT
* Plugged the NT back in
Then I got the B&N NOOK Tablet USB Device with the broken symbol under "Other devices" in Device Manager
* Open cmd and run "abd devices" from the ntroot directory
The service should start and list the NT device as a bunch of numbers.
* From here you can run NookandZergy.bat to root the NT.
After rooting you can set the options in the gpedit.msc back to defaults.
I also tried installing the Indirect provided drivers as the USB mass storage device. Windows then detected the device as an Android ADB Composite device but "adb devices" from cmd prompt would not detect the NT. I ended up removing all of the drivers and repeating my steps to get "adb devices" to detect it again.
Hope this helps! It may not be the best solution but it was a workaround for me to get the NT rooted.
****Update*****
Just got home and tried to install the drivers and it worked this time. I was able to see the NT with "adb devices"
With the gpedit.msc edit intact, I plugged in the NT and Windows detected 2 broken Nook devices under "other devices" and a mass storage device under USB controllers.
* I uninstalled the driver for the mass storage device
* set the gpedit.msc back to "not configured"
* unplugged NT
* made sure debug mode was set and automount disabled
* plugged NT back in
Device manager showed a Mass Storage device under "Other devices"
* Update drivers for that device with the Indirect usb driver
* ran "adb devices" in cmd prompt and NT is detected.
So if there's anything to take away from my post...hopefully you can use the gpedit.msc to completely disable the autoloading of drivers.
Drivers Fixed!
Rooted! Got past driver issues (Android Composite ADB Interface appeared in Device Manager, adb still couldn't detect Nook). Thanks to all who have worked so many hours on this.
Here's what worked for me (using Windows XP 32 bit):
1. make sure "adb_ini" file contains "0x2080" and is located at "%USERPROFILE%\.android"
2. I had to manually edit my "path=" environment variable to include the above location - both in Control Panel->System->Advanced->Environment Variables and in cmd window.
3. carefully followed instructions on proper installation of drivers for "Android Composite ADB Interface". At this point, cmd window use of adb was able to detect Nook (as well as runmefirst.bat).
4. Continued with root process (i.e. NookandZergy.bat)
Hope this helps anyone still having driver issues.
Never had this issue using the trick mac method.
*****To all newebies(as quite a few new people are at this forum because they got their first device! (TFP)) any anyone who wants to learn, let’s get educated about our devices!*****
ADB (Android Debug Bridge) is an extremely useful tool that WILL help you in all of your customizing needs! You may see the need to use ADB commands to help root your device, change ROMS, or send your device a fix. Without the knowledge here, you could easily be left in the dark.
ADB is a necessity for developers and general consumers alike. Knowing this tool is a great advantage to you to help your device at the best quality possible.
Installation
Download Google SDK
Choose the correct operating system and install!
The installation REQUIRES Java JDK which can be downloaded from Here
If during installation it asks for JDK (and you have installed it) Press the back button and next again, sometimes that will fix the error.
**Note** The SDK installs to C:\Program Files (x86)\Android\android-sdk standard, chose any directory for you
Start the SDK and immediately, you will notice a few checkboxes. For the standard user, just make sure Android SDK Platform-tools (under Tools) and Google USB Driver package (under Extras) – the drivers are always good to have, latest ADB drviers.
Click install 2 packages and wait. Once installed go to your installation directory and find the platform-tools folder. This directory is your ADB and will be your lifeline!
**Do you want ADB accessible through any command prompt directory?**
You are in luck. (For Windows 7)
Right click on My Computer > Properties > Advanced System Settings >Advanced (Tab) > Environment Variables > Under System Variables scroll and dbl click on Path
TO THE END of the Variable value line add
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools
Or whatever the directory you installed to + platform-tools
Open CMD and type ADB, if you did it right, you will see proper ADB jargon regardless if you are in the correct directory or not!
Congratulations! ADB is installed!
**Make sure your device is using the latest drivers (that you just downloaded) or other ADB drivers provided by ASUS to access ADB. When connected in Debugging mode, device manager will have: ASUS Android Composite ADB Interface**
ADB Usage
**I will be talking mainly about commands/arguments that the general end-user may use or come across**
**Make sure your tablet is in USB Debugging Mode to be able to connect to ADB (Settings > Applications)**
ADB Devices : This command shows all connected android devices that will respond to an ADB command. It is useful for making sure your device is connected.
ADB Connect [IPORT] : This command will connect to your device over personal WIFI connection if your device is setup for ADB over WIFI (Requires root and NOT recommended)
ADB Push [local_file] [remote_file] : This command will push any local file to the device (only if the device is Read/Writable. Stock /system/ folders are only Readable.
ADB Pull [Remote_file or Directory] [Save file or Directory] : This command take files or an entire directory and save it to your desired location. This command only works when directory is read/Writable.
ADB Shell [command] : This command will perform most UNIX commands on the device. Without a command, you can enter several shell commands before you ‘exit’. Most will not work unless SU is applied (# instead of $). Must be rooted for SU. Only play with these commands if they are known by you or exactly copied from instructions.
ADB Logcat [ > file.txt ] : This command will display (or save per > file.txt) a log of what’s happening on the device. If you are receiving errors, turn on logcat, reproduce error, turn off, and send logcat to the developer.
ADB Install [-r][-s] [local_apk] : This command force installs (or reinstalls –r or –s installs on SD-Card) any APK provided.
ADB Uninstall [-k] [APK_Name] : This command uninstalls any APK Name provided (app.apk) and will even keep cache and other data with the –k tag.
ADB start-server : This command will start the server if the server is off or killed. (Normally server will auto-start when ADB command is used)
ADB kill-server : This command will close ADB server. Useful if ADB server is acting up or not connecting to any devices.
ADB remount : This command will mounts the /system/ partition Read/Writable pending the device is allow to. Stock TFP will NOT.
ADB root : This command will restart ADB with root permissions if the build allows for it. Stock TFP will NOT.
ADB usb : This command will restart ADB on device to use USB connection for ADB communication.
ADB tcpip [port] : This command will restart ADB on device to use TCPIP connection for ADB. Standard port is 5555. Again, this connect not recommended for file transfers.
ADB reboot [recovery/bootloader] : This command will restart your device. If either of the two options are given, the device will boot into that mode (sadly TFP does not support the two options.. yet)
ADB Tips/Tricks
When following ADB instructions, follow them WORD-BY-WORD in the EXACT ORDER GIVEN. If copy and pasting their commands (one line at a time) makes it easier, then do so.
If you have root access, do not mess around in ADB shell unless you know what you are doing
Connecting over IP can be beneficial for you for quick ADB access, but for file transfers, speed is slow and you ALWAYS risk corruption (check the md5!) One bad file and you have boot-loops!
ADB Logcat is an amazing command. If anything is wrong with your device, 9/10 you can see it in logcat. If you can find the exact problem, fixes can happen much easier. USE LOGCAT TO YOUR ADVANTAGE!
ADB reboot can be a quick reboot, sometimes you don’t feel like waiting!
Use the environmental variables! It helps exponentially, and keeps from having multiple instances of ADB running.
When multiple instances of ADB are running (different directories) ADB can get messed up! (ADB not up-to-date restarts, and connect problems). ASUS Sync service has and ADB setup. Turn it off if you are not using it. Try to stick to only ONE instance of ADB
Eventually, we may have root access in our recovery kernel. Then and only then can our devices be truly customizable!
The GUIDE is not finite. Please post anything you feel should be added/corrected to the guide. Please take notice from this, as the understanding of these simple commands could help save your device(s)!
Thanks and 5 star would make me feel good inside too!
Wow... Nice post. Lots of time went into this lol. Thanks can't give the five stars in the app though:-(
Sent from my Transformer Prime TF201 using xda premium
The link in step #1 is whack - I think you want tis? http://developer.android.com/sdk/index.html
Lock-N-Load said:
The link in step #1 is whack - I think you want tis? http://developer.android.com/sdk/index.html
Click to expand...
Click to collapse
hmm thats what was in there, i re-saved and it works now ... maybe xda error
thanks tho!
biggem001 said:
hmm thats what was in there, i re-saved and it works now ... maybe xda error
thanks tho!
Click to expand...
Click to collapse
before you fixed it, it was trying to use this http://http://developer.android.com/sdk/index.html"
note the extra parens at the end and the double http call
i noticed that too, all i did was re-save and it worked. how weird.
Thanks! I've seen a few tutorials on this but this one was by far the easiest to follow and best organized. Short and sweet. Worked on my desktop great, I've never managed to install it right D:
Re posting to give 5 stars. Thanks again OP
Quick question: Is it normal for PTP mode to be required for adb to work? Because as soon as I switch to MTP I can no longer use adb.
cmat1120 said:
Quick question: Is it normal for PTP mode to be required for adb to work? Because as soon as I switch to MTP I can no longer use adb.
Click to expand...
Click to collapse
i can do either at once.. thats weird
GPS, Wifi and BT Testing
Could someone write some basic tutorials on how to verify/test GPS, wifi and BT funtions? For those of us who are new to Android it would helpful in verifying which problems are truly present. Also perhaps show how to find the serial number - for example: some don't know you have to click status - because there are a some erroneous posts out there. There may be users who assume something works or doesn't work, based on limited knowledge and these inaccurate findings only serve to muddy up the works.
There's a lot of animosity about the influx of newbies (and trust me, as a newbie it doesn't feel good). I think the first step is to educate. If some of these troubleshooting steps are laid out, more people can contribute in an intelligent way.
I thought this would be a good thread for the Guides thread, but it is closed and I cannot send PMs.
Thanks - Great Info
One thing you can add for all us amateurs is how to use ADB to install off market apps, stuff like that. Things the non-power user can benefit from. Some simple command line structure would be great.
theandies said:
One thing you can add for all us amateurs is how to use ADB to install off market apps, stuff like that. Things the non-power user can benefit from. Some simple command line structure would be great.
Click to expand...
Click to collapse
i wont add it to the guide, because adb install is pretty self explanatory but this
make sure you can install non-market apps
Code:
adb install app.apk
jonalisa said:
Could someone write some basic tutorials on how to verify/test GPS, wifi and BT funtions? For those of us who are new to Android it would helpful in verifying which problems are truly present. Also perhaps show how to find the serial number - for example: some don't know you have to click status - because there are a some erroneous posts out there. There may be users who assume something works or doesn't work, based on limited knowledge and these inaccurate findings only serve to muddy up the works.
There's a lot of animosity about the influx of newbies (and trust me, as a newbie it doesn't feel good). I think the first step is to educate. If some of these troubleshooting steps are laid out, more people can contribute in an intelligent way.
I thought this would be a good thread for the Guides thread, but it is closed and I cannot send PMs.
Click to expand...
Click to collapse
for GPS, use GPS Test app on the market
for BT and wifi testing, i'll just connect my device via BT or adhoc wifi and do the testing on my PC itself, more accurate and better programs
Excellent howto, thanks
I have trouble connecting to my prime with adb. In the Win7 Device Manager the correct device shows up, no exclamation mark at all, but adb just won't see the Prime.
USB debugging mode is on, no Asus Sync software on the PC. I have no clue why ADB won't see my device.
Now many of us can really shoot ourself in the foot.
by far the best and quickest adb install/setup ever. thanks OP!
neo1738 said:
by far the best and quickest adb install/setup ever. thanks OP!
Click to expand...
Click to collapse
aw shucks!
THANKS!
biggem001 said:
ADB Devices : This command shows all connected android devices that will respond to an ADB command. It is useful for making sure your device is connected.
ADB Connect [IPORT] : This command will connect to your device over personal WIFI connection if your device is setup for ADB over WIFI (Requires root and NOT recommended)
ADB Push [local_file] [remote_file] : This command will push any local file to the device (only if the device is Read/Writable. Stock /system/ folders are only Readable.
ADB Pull [Remote_file or Directory] [Save file or Directory] : This command take files or an entire directory and save it to your desired location. This command only works when directory is read/Writable.
ADB Shell [command] : This command will perform most UNIX commands on the device. Without a command, you can enter several shell commands before you ‘exit’. Most will not work unless SU is applied (# instead of $). Must be rooted for SU. Only play with these commands if they are known by you or exactly copied from instructions.
ADB Logcat [ > file.txt ] : This command will display (or save per > file.txt) a log of what’s happening on the device. If you are receiving errors, turn on logcat, reproduce error, turn off, and send logcat to the developer.
ADB Install [-r][-s] [local_apk] : This command force installs (or reinstalls –r or –s installs on SD-Card) any APK provided.
ADB Uninstall [-k] [APK_Name] : This command uninstalls any APK Name provided (app.apk) and will even keep cache and other data with the –k tag.
Click to expand...
Click to collapse
Just a small suggestion, adb won't accept commands if they are capitalized.
For example "ADB devices" will work perfectly, but "ADB Devices" won't.
So, in order to help the newest of newbies, you might want to put the commands in lowercase in the first post.
So i have been trying to root my tprime for about a couple days now and i really need some help. Im trying to use Vipers tool (option 1), however every time i try to use it it just gets stuck on "daemon started successfully". Every now and then the script will flip out and tell me that it isnt connected, but that is pretty rare. I'm on 9.4.2.15, have debugging checked, no lockscreen (saw it helps somewhere), device manager recognizes it as "asus transformer prime ADB interface". I have tried 2 different scripts and restarted both my tablet and computer (windows 7 x64) several times. I am at a total loss about what to do next. Any help would be great =).
Also i have deleted splashtop from my computer and made sure that and asussync are not running on my tablet
lotsofllamas said:
So i have been trying to root my tprime for about a couple days now and i really need some help. Im trying to use Vipers tool (option 1), however every time i try to use it it just gets stuck on "daemon started successfully". Every now and then the script will flip out and tell me that it isnt connected, but that is pretty rare. I'm on 9.4.2.15, have debugging checked, no lockscreen (saw it helps somewhere), device manager recognizes it as "asus transformer prime ADB interface". I have tried 2 different scripts and restarted both my tablet and computer (windows 7 x64) several times. I am at a total loss about what to do next. Any help would be great =).
Also i have deleted splashtop from my computer and made sure that and asussync are not running on my tablet
Click to expand...
Click to collapse
Update your ADB drivers in device manager with the following
http://forum.xda-developers.com/showthread.php?t=1426502
Make sure USB Debugging is enabled within your TFP's settings (Developer options)
If that does not work then you have done something wrong.
Have a nice day
that didnt work >< but i have no idea where i couldve done something wrong...especially since i have had to re-do most steps anyway
lotsofllamas said:
that didnt work >< but i have no idea where i couldve done something wrong...especially since i have had to re-do most steps anyway
Click to expand...
Click to collapse
Well if you really want this, I would suggest the following:
We want to verify that your devices is correctly connect with ADB,(assuming you dont have adb set up) so lets set up Android SDK (which is good to do anyway).
http://developer.android.com/sdk/index.html
Download the .exe. Run it. It should create a folder in a location of your choosing, named something like "android-sdk". Browse to that folder, then to the 'tools' sub folder and run the SDK manager, install packages.
Next open the Command Prompt.
For example sake, lets say the location of your AndroidSDK is in the path
Code:
C://users/mike/android-sdk-win/
(Not sure what the sdk folder is actually called)
In the command prompt, enter
Code:
cd /users/mike/android-sdk-win/tools
(again replacing the location and name with the correct ones)
This will change the cmd location to the tools folder.
Then enter
Code:
adb devices
It will then list a device if one exists, if not then your adb drivers are probably not installed correctly.
If you need me to clear anything up, let me know
you were right i wasnt connected, im not quite sure how im doing anything wrong
installed the drives said to
unzipped
went into device manager -update driver software -browse -lemme pick -have disk-android_winusb -ok -comes up as ADB interface -next -finishes installing
try to run viperMOD PrimeTime v4.5 (option 1)
stalls on daemon started successfully
i figure if i go into as much detail as possible maybe this can get solved =(
lotsofllamas said:
you were right i wasnt connected, im not quite sure how im doing anything wrong
installed the drives said to
unzipped
went into device manager -update driver software -browse -lemme pick -have disk-android_winusb -ok -comes up as ADB interface -next -finishes installing
try to run viperMOD PrimeTime v4.5 (option 1)
stalls on daemon started successfully
i figure if i go into as much detail as possible maybe this can get solved =(
Click to expand...
Click to collapse
Hmm, I am really not sure. Sounds like you have done everything right.
adb devices is showing no devices which means viperMOD will not work.
When you plug the prime into your computer, on your prime,go to the notification bar and hit on the usb notification (not pc sync, the usb one), and when the settings menu opens up, which box is checked? MTP or PTP? if ones not working, try the other
if all else fails,
try it on another computer maybe?
lotsofllamas said:
you were right i wasnt connected, im not quite sure how im doing anything wrong
installed the drives said to
unzipped
went into device manager -update driver software -browse -lemme pick -have disk-android_winusb -ok -comes up as ADB interface -next -finishes installing
try to run viperMOD PrimeTime v4.5 (option 1)
stalls on daemon started successfully
i figure if i go into as much detail as possible maybe this can get solved =(
Click to expand...
Click to collapse
I rooted last night on latest version of primetime. I used a very old computer to do it. I had it stall on daemon started successfully at first also. I just unplugged the prime connection to PC and plugged it in again. then restarted the primetime program. worked for me. seems like everything you did is right. I guess sometimes the program acts funny. try to run and if it stalls just unplug connection to PC. close out app. then plug back up. open program and try again. it'll catch. I notice it'll stall if you keep trying to root after repeated ffailed attempts. close out the exe. then try again.
demandarin said:
I rooted last night on latest version of primetime. I used a very old computer to do it. I had it stall on daemon started successfully at first also. I just unplugged the prime connection to PC and plugged it in again. then restarted the primetime program. worked for me. seems like everything you did is right. I guess sometimes the program acts funny. try to run and if it stalls just unplug connection to PC. close out app. then plug back up. open program and try again. it'll catch. I notice it'll stall if you keep trying to root after repeated ffailed attempts. close out the exe. then try again.
Click to expand...
Click to collapse
It has nothing to do with the Prime time. As he has said, he got the android sdk setup and confirmed that "adb devices" shows no device, which lends itself to his device or drivers not being installed correctly.
Again, nothing to do with vipermod
everything to do with how he is connected (and i think he tried 'unplugging and replugging')
-------------------------------------
Lets Try this. The following may look intimidating but its very straight forward and after its done you will be more adept at adb and everything else (and hopefully be rooted)
1) Start=> Right Click "My Computer" => Properties => Advance System Settings => Advanced Tab=> Environmental Variables
---In the top box, there should be a "PATH" variable, if so hit edit and go to the end of whatever is there (make sure there is a ';' after whatever is there) and type the path to your android SDK tools folder (same folder you browsed to before in cmd)
My PATH Field looks like this
Code:
C:\Users\Mike\Downloads\android-sdk_r16-windows\android-sdk-windows\platform-tools\; C:\Program Files\Java\jre7\bin
(I also have java linked, this is okay if you do not)
If there is no PATH, just hit 'new'
The above allows you to, from command prompt, type "adb" from anywhere (ie, you dont have to be in the sdk folder which is nice)
EDIT: FLAW: the following app required root womp. I guess keep trying with the USB{
-Go to Device Manager, Uninstall Your TFP, before hitting refresh go to add new devices and select the drivers and what not.
-I will continue to try to think of an alternate method.
}
2)Download and Install this on your prime (NOTE THIS STEP REQUIRES BOTH PRIME AND PC TO BE ON SAME NETWORK)
-This method is ADB over wireless, so you dont need USB to be connected (infact just unplug it for this)
https://market.android.com/details?...251bGwsMSwyLDEsInNpaXIuZXMuYWRiV2lyZWxlc3MiXQ..
Open the app and enable it. Note the "IP: port"
type in your command prompt (again if you did step 1, you can do this from anywhere)
Code:
adb connect <yourip:port>
your ip and port should be listed in that app
=> after that, try
Code:
adb devices
It should be there! this allowed you to bypass usb issues. I dont think you can use vipermod, but there is a more manual method we can use
3) Memphroid Root
(information taken from link below)
http://forum.xda-developers.com/showthread.php?t=1461736
memphroid binary
su binary
save both those files somewhere.. for example sake, make it your desktop in a folder called 'memphroid'
Open command prompt and change to the folder memphroid on your desktop
Code:
cd Desktop/memphroid
(the above assumes command prompt defaults at c:\Users\<yourname>\. if not just type in "dir" to get a list of directories that you can cd to)
you are now in the memphroid folder
assuming you did step 2 correct, you should have already connected with "adb connect"
now enter the following in cmd
Code:
adb push mempodroid /data/local
adb push su /data/local
adb shell
One line at a time, the first 2 push the files to the correct locations, the third one puts you into the 'shell' (basically terminal) of your prime (you should see a # now before where you type)
Then enter
Code:
chmod 777 /data/local/mempodroid
/data/local/mempodroid 0xd9ec 0xaf47 sh
Copy all of that and just paste it at once (i think its both at once, not one line at a time)
then type
Code:
mount -o remount,rw -t ext4 /dev/block/mmcblk0p1 /system
And then here is the rest from that thread. I would just do all of the following except the first two lines starting with 'rm' because you havent rooted before
** IF you have previously rooted your Prime, run the following two commands. They may throw an error that the file a file was not found.
rm /system/bin/su
rm /system/xbin/su
cat /data/local/su > /system/xbin/su
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local/mempodroid
rm /data/local/su
exit
exit
adb reboot
After your Transformer Prime comes up, install Superuser from android market.
Click to expand...
Click to collapse
look to that thread linked for reference. if you neeed anything clarified or help, just post here. Please read my post carefully, following the step. I tried to be as clear as possible. I have never done the memphroid root before but it looks easy enough
Please hit 'Thanks' button, as I have taken the time to help
Still not able to get root...just tried Debugfs automated root tool and it stalled at "daemon started successfully" im seriously stumped here...
I've got a droid razr; rooted, stock rom
I broke the screen accidentally and now the screen isn't showing anything and touch isn't working.
I'd like to recover all the data off my device, but since it's locked, it won't budge. Drives won't mount when I plug it into my PC.
I've got a previous backup which is a little older, but i'm interested in backing up the actual databases (texts, call logs, etc) and system data too, along with my images and personal data.
Is there any way I can perform a whole backup while the system is locked like this?
I've already searched the forum for previous threads with similar issues, but I couldn't find one with a viable solution.
Any help is appreciated, thanks in advance.
Partial Update
Hey all-
I've partially solved my problem.
I was able to get ADB working miraculously. I downloaded the Motorola Device Manager and installed it, also downloaded the Android SDK/Java SDK;
Using the sdk manager i installed the google usb drivers (im not sure it helped any way, but just in case)
after that I ran through the process of adb
Code:
adb kill-server
adb start-server
**plug in device**
adb wait-for-device
adb get-serialno
From there I was able to use "adb shell" and navigate around the file system; used su, went to /data/system/ and did "mv gesture.key gesture.key.bak"
I then restarted my phone and did a repeat of wait-for-device, and get-serialno just to verify the phone was connecting properly.
I then browsed to my computer and amazingly, the drives mounted, my sdcard, and sdcard-ext as removable drives and I was able to view the contents.
-------
So now, I'm stuck here with a device that's NOT locked, I can view my files, and I can navigate the file system.
My end goal is to be able to copy everything from /data/ to /etc/ /system/ /root/ /sdcard*/ /vendor/ /xbin/ and any other system file that's not available through the mounted drives.
I'll keep this thread updated, and if anybody has any help or clue on how I'd do this, it'd be greatly appreciated.
So far I've tried variations on "adb pull" using / as a root dir; trying to find a way to use the shell to invoke scp, ssh, or some other file transfer, but I get no network connection. While in the adb shell and doing any file operations, I get an error stating that it's a read-only file system as well.
Fixed
I just wanted to let you all know that I've resolved my problem.
Let me state the issue again.
- Screen and touch broke.
- Device locked with pattern
- Rooted
- ICS - Stock Verizon ROM
- USB Mode was UMC, not PTP/MTP
- USB Debugging enabled
I used ADB to delete /data/system/gesture.key and rebooted, effectively removing the device lock, and allowing drives & data on my SD cards to show up in explorer after a reboot of the phone.
After futzing around for a bit, I realized the phone was tied to my Google account, and I remotely installed "Droid VNC Server" (app name org.onaips.vnc)
From there I found a way to activate the VNC server through the ADB command line
Source: android.stackexchange.com/a/31957
Code:
Application located in
/data/data/org.onaips.vnc/files
With a root shell, run this
chmod 766 /data/data/org.onaips.vnc/files/androidvncserver
Then you can execute the vnc server from the command line
/data/data/org.onaips.vnc/files/androidvncserver
Run this to forward the port
adb.exe forward tcp:5901 tcp:5901
On your VNC client, connect to localhost:5901
From there I was able to get access to my home screen and pulled the notification drop down and changed from USB Mass Storage to Camera/Media Mode
Rebooted the phone, started the vnc server again, connected to it and moved some files around to my SD Card
In another adb shell as root, I was able to copy files from /data/data/ (or anywhere else I wanted) and write them to anywhere on /sdcard-ext/
From there in another command shell, I ran adb pull /sdcard-ext/datafolderfile
=========================================================================
I believe this to be the overall gist of things, though I ran into hiccups along the way, while I was messing around, I changed some permissions which caused my su executable to break and only be allowed to run shortly after booting the phone; and also because of the broken screen, something would cause the phone to reboot every so often, breaking my connections, backups, file transfers, and etc
There's also a cool option in adb
Run
"adb backup" and it'll give you all the switches, you'll have to confirm the backup on your phone, so be sure to be running VNC and confirm it, but adb backup should be able to grab everything you need. Like I said it didn't work for me because my phone would reboot;
I hope everybody that sees this can benefit from it
Annafunny said:
So did you extract your data from your Razr with adb finally?
Click to expand...
Click to collapse
This thread is really old (4 years)... and the answer was provided.
To avoid further issues, closed.
Hey Guys,
Been lurking for a while. I want to get into some Android development. I bought a cheap Galaxy Tab s SM-T800 from ebay. It was a retail unit, so came with the usual retail protection, but that was no issue, I've reflashed it and rooted it, it is now running 6.0.1 with build number MMb29K.T800XXU1CRJ1.
The issue is, there are a bunch of apps and files that appear to be left over from the retail demo mode, and I can't remove them. The apps won't uninstall, it just says "uninstall unsuccessful", and the files, when I try to delete them, it just says "failed to delete".
Even after freshly restoring the new firmware, the storage on this device is pretty much zero, a lot of the space being taken up with the files and apps that I can't remove.
There was just about enough space remaining to install System App Remover, but that couldn't delete the files and apps either.
How are these files being write protected? How do I go about removing the write protection? I'm wondering if this device, because it was a retail demo unit, was configured with some kind of write protected partition, which is why the storage is so low, and why I can't delete the apps?
Any thoughts, this is driving me nuts.
Thanks
Install a file manager that allows to mount the partitions in question as READ-WRITE, thus folders/files can get deleted
jwoegerbauer said:
Install a file manager that allows to mount the partitions in question as READ-WRITE, thus folders/files can get deleted
Click to expand...
Click to collapse
Thanks, but I can't install any of the file manager apps, as there is not enough free space. I'll need to do it by connecting from Windows. What android partition/file manager would be a good one to use from Windows?
DotNetDude said:
Thanks, but I can't install any of the file manager apps, as there is not enough free space. I'll need to do it by connecting from Windows. What android partition/file manager would be a good one to use from Windows?
Click to expand...
Click to collapse
Because your device is rooted, you use ADB ( read: Android Debug Bridge ) - what you've to install on your Windows computer - to manage this device - you must have turned on Developer options -> USB Debugging on it, of course: IMHO the only the chance you have.
Once done so, you connect your device via USB cable with Windows computer, then in Windows command prompt run the commands as follows - one after one:
Code:
adb devices
adb root
adb shell mount -o rw,remount / -t auto
If success then your Android device completly is switched to READ-WRITE mode, you then via further relevant ADB commands can remove folders/files which you consider dispensable, even apps if you know their package name, and so on ...
jwoegerbauer said:
Because your device is rooted, you use ADB ( read: Android Debug Bridge ) - what you've to install on your Windows computer - to manage this device - you must have turned on Developer options -> USB Debugging on it, of course: IMHO the only the chance you have.
Once done so, you connect your device via USB cable with Windows computer, then in Windows command prompt run the commands as follows - one after one:
Code:
adb devices
adb root
adb shell mount -o rw,remount / -t auto
If success then your Android device completly is switched to READ-WRITE mode, you then via further relevant ADB commands can remove folders/files which you consider dispensable, even apps if you know their package name, and so on ...
Click to expand...
Click to collapse
Thanks for your details.
So I tired this but the adb root command wasn't working. It was coming up with the message:
adbd cannot run as root in production builds
So after a bit of research, I found the adp insecure app from Chainfire, that apparently resolves this exact problem. So I've deployed that to the tab and run it, but now when I connect the tablet to my PC, the PC doesn't connect. I get the charging symbol on the tab, so the connection is in place, but it is not detected by the pc, so I can't connect using adb.
Any suggestions would be much appreciated?
Thanks
DotNetDude said:
Thanks for your details.
So I tired this but the adb root command wasn't working. It was coming up with the message:
adbd cannot run as root in production builds
So after a bit of research, I found the adp insecure app from Chainfire, that apparently resolves this exact problem. So I've deployed that to the tab and run it, but now when I connect the tablet to my PC, the PC doesn't connect. I get the charging symbol on the tab, so the connection is in place, but it is not detected by the pc, so I can't connect using adb.
Any suggestions would be much appreciated?
Thanks
Click to expand...
Click to collapse
I realise I am responding to my own message!
Now that I am running with adb insecure, I have realisd that the USB debugging mode from developer settings is working in reverse. That is, if I enable it, the tab detaches form the PC. If I disable it, the tab reconnects to the pc. However with that setting disabled, and the pc connected, when I then run the command adb devices, it says there are no devices connected (even though I can browse to the tablet through windows explorer)
From within the adb insecure app on the tablet, when I enable the app, I can see it displays a message that says USB debugging is disabled.
I have no idea what is going on here...
Any help much appreciated?
Thanks
@DotNetDude
May be reading this helps.
jwoegerbauer said:
@DotNetDude
May be reading this helps.
Click to expand...
Click to collapse
Thanks for this. Actually, adbd insecure was just causing more problems. In the end I have resolved this by extracting the PIT file and re-partitioning. Firmware then restored correctly and all the problems are now gone, and there is plenty of free space remaining.