i had boot the device into fastboot and while checking for connected device in pc using cmd , the device is not showing
device - realme 6
1-Download andriod google usb drivers file is attached
2-put device in fastboot mode and conect with pc
3- Go to device manager
4- see for unknow device or andriod with yellow mark on it in device manager
5- click on unknown device select update driver and select manualy pickup driver
6- select have disk select extracted usb driver folder
7- select andriod_winusb inf file
8-choose andriod bootloader interface and you are are good to go.
Thanks, it worked
Related
Hello I got this tablet Prestigio - PMP7280C3G V4.2.2 back in November, December time and I am wanting to Root it.
From a post I did back then on another website a user replied that he got it working and rooted using a method on a website into which here's the Instructions translated into English below....
-
Testing the current model PMP7280C3G_DUO with FW 1.0.05 and 1.0.07
Installing CWM :
First Tablet Do NOT let it lie somewhere near you will need it .
Second Download and unzip the file . PMP7280C3G_QUAD-recovery-flash.zip | Ulo?.to password : 7280
3rd Open Device Manager on the computer to turn off the tablet and connect the cable to the PC for a while, the new device
( MT65xx preloader ) right click update driver (if 2x click left to open the info on the device and select Update Driver )
and manually install the driver " MediaTek preloader USB VCOM Port " from the Drivers folder depending on your version of
Windows (tested on XP and Win7 32bit and 64bit ) - If does not happen the first time you just disconnect and reconnect
tablet , again captured the moment on the device.
4th Unplug the tablet and start Flash_tool.exe
5th Right click on a scatter - loading and set the path to the directory / PMP7280C3G Recovery
CWM/MT6589_Android_scatter_emmc.txt and let Open.
6th Up in a menu icon you click on a download in the following confirm with YES you want to continue .
7th Connect the tablet off - starts by itself recovery download to your tablet . Can now be two situations ; endings Will
a download window with a green circle . A second variant or passes first the download and install the computer starts by
itself another driver " MediaTek DA USB VCOM Port" and flash program throws an error . Not to worry if you just unplug the
tablet itself on off it and click again to download again, click YES to connect off tablet . Ted would arrive melo
successful recovery in tablet and confirmation will be green ring in a new window.
8.Odpojte cable from the tablet and hold the VOL + and Power 3 seconds and you are in CWM recovery .
ROOT :
First In the ROOT folder is a file Supers - v1.65.zip and upload the memory card or tablet.
Second Run the recovery and select "install zip from sdcard" then select a location where you want the file to install
depends by location " choose zip from sdcard " and " choose zip from internal sdcard " you will find include file and
press power.
3rd select reboot system
That's all .
Way back in the state with Origami recovery without root if required :
Approach, as well as with CWM just place ingredients into CWM Recovery Route to Recovery folder Origo . The rest is the
same. In the tablet to run the application supers and remove root data settings .
THNX :
XDA for Supers - v1.65.zip
-
-
-
Now from the above I have downloaded the files Turned off the Tablet gone into device manager and plugged in the cable from the Tablet to the USB-Port of my laptop. It says in the steps above in step 3 that a new device ( MT65xx preloader ) should show up but it doesn't not in device manager not even on my computer now is that because the tablet is turned off also when its off and plugged in it's just charging.
Also when I got this Tablet I already hooked it up to my laptop to put music onto the tablet and photos so does that mean I need to turn the tablet on and uninstall anything that is to do with the Tablet in device manager then go from step 3 again - Does anyone know if that sounds about right since the new device ( MT65xx preloader ) in device manager doesn't show up yet with it's turned off and plugged in.
Any help will be Massively Appreciated.
i had a fresh install of windows 7, evn prvsly i was on windows 7 and somehow i had managed to install all drivers for xperia p
but after this fresh install i am unable to go to fastboot , somehow i installed flashmode drivers
i evn installed the drivers from fastboot-drivers.exe but no use when i start flashtool and try to enter fastboot mode i get an error message saying the device drivers are not installed , install these drivers from flashtool folder
what do i do ? evn in device manager when i update it doesnt find any software.. when windows try to install s1boot fastboot drivers it shows not installed
where m i wrong? please help me
I think i had that same problem too, and took me some time to find the right answer, it is probably windows that won't install unsigned drivers, so try reboot, and press F8, and allow installation of unsigned drivers, though i just wrote a CMD code at that page i visited, but i can't find it now lol.
Well try here http://www.techspot.com/community/t...signed-drivers-in-windows-vista-7-x64.127187/
pda net
try to install pda net app on ur pc
if this dont work than open device manager
and plug ur phne in fastboot mode
on device manager ut show s1 fastboot somthing like that just for 5 sec
hurry and double click on that
after that update driver
select browse my computer for driver software
after that select let me pick from a list of device
after that click on android device
and click on next and ur driver is installed
but first install pdanet on ur pc
ITS SIMPLE.........
1. Go to device manager
2. Expand universal serial bus controller
3. Right click on "....family USB2 Enhanced host controller - 27cc" and disable it
4. Connect your phone in flash mode
5. The phone detect as s1 boot download
6. Right click on update driver and install it
Hi, unfurtunatlly I install TWRP JUI 7.1 when I was in EUI ROM. only red LED blink when USB cable is plugged in. PC says "unknown device" when Cool 1 is connetcted.
Phone is not visable to ADB, CDA and YGDP.
Do You have any idea how unbrick?
Ok. problem is resolved, I install new recovery by this thread instruction: https://forum.xda-developers.com/cool1/help/bricked-cool-1-t3726666/page2
• 1º install all drivers and MIFLASH
Remember that your device is erasing and only flashes the red light when connected to your computer, if your cell phone is in this state is a good sign as we will be able to get it to be identified to install the room;
2º HOW TO MAKE THE APPLIANCE IDENTIFIED ON THE PC
With the installed drivers connect your cell phone to your computer, open the Control Panel go to Device Manager and leave the screen open to observe: now with the phone connected we will press together the volume +, volume - and Power button together and secure them until the phone is identified by the system on the DEVICE MANAGER page (for the phone to be identified it may be necessary to keep pressing the buttons for more than 60 seconds, if it is not identified at the end of 120 seconds repeat the process of tightening buttons until the system identifies them).
• In case the system identifies but does not automatically install the driver it is necessary to perform a forced installation:
3º Forced driver installation:
With Device Manager open, we have the device to the computer, it has not been installed correctly for which it is necessary to perform the forced installation procedure. If the installation is not successful, the WINDOWS DRIVER DIGITAL SIGNATURE may be active and the installation of a set to first of all will disable it:
• Then type in the Windows search field and query by CMD, right-click and select to run as administrator with the command prompt open in administrator mode enter the following command without the quotes "bcdedit / set loadoptions DDISABLE_INTEGRITY_CHECKS "Ready a driver signature to be disabled, let's now forge a driver installation.
Right-click on the identified device but it is not recognized and select UPDATE DIVER, now on PROBE DRIVER SOFTWARE ON THE COMPUTER, click PERMIT THAT I CHOOSE ON A LIST OF AVAILABLE DRIVERS IN MY COMPUTER now in NEXT and on click in WITH THE DISK; Browse to your local disk where the driver was installed, LENOVO folder, normally installed in the directory: C: \ Program Files (x86) \ LenovoUsbDriver \ Navigate to a subfolder SERIAL and select the following file -Lenovo_ser click open and then In OK, Look for Qualcomm HS-USB QDLoader 9008 and confirm installation, prompt your device is now correctly connected and available and available for MIFLASH.
4º USING MIFLASH
Now with the drivers properly installed open the MIFLASH 1 click on REFRESH 2 select the folder of the recovery room that must be unzipped and 3 click on FLASH wait until the process finishes "in my case presented error at the end of the installation, but did not interfere , the process was enough so that I could already open the recovery mode of the mobile. "
• With the MIFLASH still open now press the Power button, volume - and volume + again until you make the identification noise on your computer again, in MIFLASH search for the EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92 folder and select the twrp subfolder and a REFRESH from your device should be recognized by MIFLASH, now click on FLASH and wait for the end of the installation.
With the twrp installed enter into recovery mode on your cell phone by pressing the Power buttons and the volume + button, click Wipe, Format Data, type yes and confirm this will delete your cell partition.
Hi guys,
i hope anyone has a solution for me here.
So i have this weired case where the phone shows up in ADB but not in fast boot in the windows device manager when using the Recovery/Fastboot mode.
I already tested 3 different PCs and multiple cables. I as well got lucky and a friend of mine got a note 9 as well. With this the Fastboot and ADB show so it shouldn´t be a driver issue.
Can anyone help me with this problem because i would have wanted to get TWRP on this phone.
...I think it's ok when it shows up in ADB. Did you hear the windows connection sound on the PC when you plug in the device?
You need to install the driver.
Without it, the phone is only detected in adb:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
Don't forget to disable Driver Digital Signature enforcing in Win10.
kalehrl said:
You need to install the driver.
Without it, the phone is only detected in adb:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
Don't forget to disable Driver Digital Signature enforcing in Win10.
Click to expand...
Click to collapse
As I wrote before, I got 2x the same Phone on hand one gets recognized and all by windows and shows up with the correct device driver in fastboot. The other phone doesn't show a thing, windows isn't even recognizing that it got connected in fastboot.
Strange is that the phone that doesn't get recognized in fastboot mode does get recognized in edl and adb mode.
So in the end I am looking for an information if this could be fixed or if the main board is some kind of damaged.
opg2000 said:
...I think it's ok when it shows up in ADB. Did you hear the windows connection sound on the PC when you plug in the device?
Click to expand...
Click to collapse
No sadly not, with the second device I could hear it connect and show correctly. The problem phone shows in adb and edl but not fastboot
Knoppersd said:
As I wrote before, I got 2x the same Phone on hand one gets recognized and all by windows and shows up with the correct device driver in fastboot. The other phone doesn't show a thing, windows isn't even recognizing that it got connected in fastboot.
Strange is that the phone that doesn't get recognized in fastboot mode does get recognized in edl and adb mode.
So in the end I am looking for an information if this could be fixed or if the main board is some kind of damaged.
Click to expand...
Click to collapse
I got the same issue but by installing the above driver and changing the new type-C cable.... helped me and solved my problem......
Knoppersd said:
Hi guys,
i hope anyone has a solution for me here.
So i have this weired case where the phone shows up in ADB but not in fast boot in the windows device manager when using the Recovery/Fastboot mode.
I already tested 3 different PCs and multiple cables. I as well got lucky and a friend of mine got a note 9 as well. With this the Fastboot and ADB show so it shouldn´t be a driver issue.
Can anyone help me with this problem because i would have wanted to get TWRP on this phone.
Click to expand...
Click to collapse
have yu got the solution of this because I am also facing the same issue.
No sorry, the phone is still dead and i moved on from it.
kalehrl said:
You need to install the driver.
Without it, the phone is only detected in adb:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
Don't forget to disable Driver Digital Signature enforcing in Win10.
Click to expand...
Click to collapse
Managed to connect my Redmi Note 9 (merlin) to Fastboot with my Windows PC and install stock ROM with MiFlash thanks to this driver.
To install the driver i did:
1. Download driver from link above (ignored Firefox's warning of potential risk).
2. Unpack the rar file.
Now we must disable Windows Driver Signature for the driver to install correctly. It will only be disabled during a single boot and the automatically revert to active and secure again after reboot.
3. Restart Windows while holding the "Shift" key through Start Menu -> Power ->Restart.
4. The blue Windows Advanced Boot menu should appear. Select: "Troubleshoot" -> "Advanced Options" -> "Startup Settings" -> "Restart"
5. Computer will restart to the Startup Settings Menu. Press number "7" key on your keyboard to select "Disable driver signature enforcement". Windows then will boot to Desktop.
6. Search and open "Device Manger" on Windows menu.
7. Under "Other devices" right click "Android" (for me it appeared with a caution sign because of the default driver error) and then "Update driver".
8. Browse my computer for Drivers -> "Let me pick from a list..." -> Select "ADB Interface" (not sure if it is important which type of device is selected) -> "Have Disk".
9. Browse the downloaded driver folder that was unpacked on step 2 and select "android_winusb.inf" (this is the Windows driver).
10. On the Windows Security prompt select "Install this driver anyway".
From here on Fastboot mode should be recognized by the PC and you can install a ROM using MiFlash or following any other guide to install via Fastboot in this forum.