Hi there, I am wondering if it is possible for the XDA to work in Australia. I have the upgraded rom from Xda devellopers and have removed the sim lock, but it dosen't seem to pick up the Aus networks.
Any help would be great
What for device are you using? PW10A or PW10B?
Maybe it's a problem with the GSM-networks. PW10A is for 900/1800MHz and PW10B for 900/1900
Have you tried to search manual for any available services?
Stefan
How do I find out the PW10a or b info.... The other version info is as follows
ROM Version; 3.17.03 ENG
Radio Version; 4.21.00
Protocol Version ; 32s54
Sorry, found it....PW10A1
I am guessing no one has any help or info about this. what a wasted purchase.
The XDA/XDA II/XDA III (IIs) do work in Australia.
Where is your XDA from, country? What network are you trying to connect too down here?
I have been told it is from the UK. I purchased it 3rd hand so I can only go by what the previous owner has told me.
In the auto config screen, I get the options for 02 network from UK, Ireland, De and a few others.
I am wanting to connect it to an Optus network preferrably, but any would do.
I have tried Optus (plan and prepaid) and telstra plan, but no signal shows up.
Just clarifying, you have tried Optus and Telstra phone services or data services?
You verified the SIM's worked in another phone?
The sims are able to be swapped into various phones, I have a panasonic gd50, a nokia 7250 and a motorola v600, and an ericson (can't remember what model) and they all work in each other.
The sims are set up as phone service, ie: normal mobile usage, I have even tried an optus prepaid in it.
I am only wanting to use it for the phone service, gprs and net usage is not of interest as yet.
Howdy, I have the same model and it works fine on Telstra. I originally had problems with SIM lock and GID lock, but after upgrading to 2003 from lumpistefans kitchen I've had no problems with it! Good reception and minimal drop out. It's not a waste of money. The ROM i used was the O2 one and did not use the auto config, it finds it for itself and aknowledges the telstra network fine. If you go to an Optus shop they should be able to help, they also have pretty good phone help and should be able to talk you through the settings,
Good luck!
Peace,
Robert
Thanks Ryap. I am thinking that it should automatically find the network tho......is this not the case
I know on XDA II and PDA2K you can select the network or set it to Automatic. Might want to check this setting.
SETTINGS > PERSONAL TAB > PHONE > NETWORK TAB
I am thinking that it should automatically find the network tho......is this not the case
Click to expand...
Click to collapse
I think you are confusing the autoconfig of the device with the network setup for the phone.
You can cancel the autoconfig that appears at the end of a hard reset. This just gives you some quick settings for the GPRS and MMS networks - you can add these later after talking to Optus.
Once the SIM is in, you need to make sure the phone is on by switching OFF flight mode. This kicks the phone in. Then if Optus is not picked up as your default network you just go into Settings>Phone>Network and then use the Find Network button and then the Set Networks button. After that you can check the Automatic Network selection button to make the settings stay.
Flickster
Hi all, thanks for the support so far,
As of now, I can't get any network at all....still.
when i insert the sim and enable the phone it says serching, but thats about it.
I have no idea where to find the flight mode, and when I click on the phone in the settings screen, nothing happens.
I don't get any carrier name or logo come up and appear.
Cheers
Michael
On XDA II (don't have XDA) when the phone senses a service it puts four vetical bars next to the speaker/volume icon at the top of the screen. If you tap the bars it should bring up a pop-up, this is where there should be a line (link) to click on that says "Turn off flight mode". I am not sure if this is part of the original XDA though.
When you clicked on the PHONE icon under SETTINGS it didn't do anything?
At the top bar, next to the speeker, I have a tree type logo and when i tap it it says searching. When i open the phone and then click options, it freezes for about 5 maybe 7 mins and then the settings screen opens, from there it freezes and i can't select anything
Hi all.
I am greatful for you help and support up till now.
I have managed to fixmy problem.
When putting the xda devellopers rom on the pda, ther eis an option calledGSM Band in the programs list.
Well turns out it was set to 900, so i changed it to 900/1800 and rebooted the xda.
WELL HEY PRESTO, IT FOUND THE OPTUS NETWORK
So all is good and all works.
As I mentioned before I am greatful for all the support and thankyou to all who racked their brains over this.
Can somebody help me set up my device to correctly access the Rogers network in Canada?
I had a Rogers branded motorola phone and had no problem moving my sim over to the Advantage. Able to do phone functions with no problem.
Everytime I reboot my device the network settings dialogue complains that it is not set correctly. Of course the built in settings don't work for Rogers and I'm not sure what needs to be done to get it set up and working.
Thanks.
I'm using Rogers in Calgary.
Go Start>Settings>On the "personal" tab tap the Phone icon>Tap the "band" tab>Network type "Auto" and GSM/UTMS band to the third one down "GSM(1900+850....)
Try that and let me know if it works. I always cancel the network wizard when it pops up because it doesn't have Rogers in its data base.
I just got a new Lumia 800 and I'm having trouble with a few things.
I can't find the Nokia apps section anymore after (I think) changing my system locale from US to PRC to UK to US again; I changed them to find Network Setup. And I could never find Network Setup, which I heard they pulled from the marketplace.
But my second thing is how do I get my apn to change and stay changed. I tried using the same settings I had before on China Unicom ("3gnet") and it does not work. I just came from another Lumia So I know with certainty that the apn is right.
Please help.
edit: I fixed the disappearing Nokia Section but the apn and Network Setup still escape me. To add the Nokia Apps go into the marketplace via xboxlive then back out and browse the normal marktplace. Success.
Hi. Just a quick question. But first, there is the backstory.
I am from Malaysia. CSC XME. I bought my S9+ by pre-order from online retailer, and 2 of my friends bought theirs from samsung store.
Today I realize my phone is missing a few options in the settings app. Two that I notice didn't exists on my phone but do on my friend's phone.
1. No option to skip OK button when entering pin. (this settings is available during pin setup)
2. No Separate Sound settings.
Its weird because both are unlock and not a carrier specific model.
If i download a firmware from samfirm, would it fix these issues?
Or any of you guys found a solution for this? Please assist.
Thanks.
I recently purchased a refurbished phone Samsung Galaxy S21 5G. I just got it yesterday, and found that I am not able to use my mobile network. The sale said it is factory unlocked, and according to the descriptions, it should work just fine with my US Mobile SuperLTE network as well. When I switched on the phone, I see Verizon on the screen and so, I assume that it was locked to Verizon in the past.
When I tried to change the network settings, specifically the APN settings, I get the message "Access Point Name settings are not available for this user." The three dots on the top with reset to default is also greyed out along with Network mode in the previous page. When I click Network Operators and try to connect to the network manually, I am only able to connect to Verizon Wireless and no other. But, calling and messaging seems to work fine. Is it that the unlock process has not been completed properly? Did any of you face the same problem before? It would be great if there is something that I could do to unblock the APN settings as the rest of the phone works really well. The specific model is SM-G991U.
Thanks!
Aisp said:
I recently purchased a refurbished phone Samsung Galaxy S21 5G. I just got it yesterday, and found that I am not able to use my mobile network. The sale said it is factory unlocked, and according to the descriptions, it should work just fine with my US Mobile SuperLTE network as well. When I switched on the phone, I see Verizon on the screen and so, I assume that it was locked to Verizon in the past.
When I tried to change the network settings, specifically the APN settings, I get the message "Access Point Name settings are not available for this user." The three dots on the top with reset to default is also greyed out along with Network mode in the previous page. When I click Network Operators and try to connect to the network manually, I am only able to connect to Verizon Wireless and no other. But, calling and messaging seems to work fine. Is it that the unlock process has not been completed properly? Did any of you face the same problem before? It would be great if there is something that I could do to unblock the APN settings as the rest of the phone works really well. The specific model is SM-G991U.
Thanks!
Click to expand...
Click to collapse
So, you need to go into the settings menu and find about phone, software info. What you want to find is the CSC information.
It will basically look something like this: XAA / XAA-XAA / XAA (or some other letters like VZW or ATT or TMB etc etc.
What taht will tell you is very helpful in determining what rom the phone is running and what kind of device it was originally. Find that in your device and post it and people will help you to figure out what it means.
AsItLies said:
So, you need to go into the settings menu and find about phone, software info. What you want to find is the CSC information.
It will basically look something like this: XAA / XAA-XAA / XAA (or some other letters like VZW or ATT or TMB etc etc.
What taht will tell you is very helpful in determining what rom the phone is running and what kind of device it was originally. Find that in your device and post it and people will help you to figure out what it means.
Click to expand...
Click to collapse
Thank you so much for your reply. I looked through the software section in the about section. I found the following codes about the rom.
Aisp said:
Thank you so much for your reply. I looked through the software section in the about section. I found the following codes about the rom.
Click to expand...
Click to collapse
So the csc info is complicated, I'm no expert on it. But it does look like the OYN indicates it's a multi csc rom. It does have XAA as a part of the code, and that indicates it's 'open' for that specific part. But all the others are VZW. So it's running a vzw rom, obviously.
Your sim US Mobile uses both verizon and t-mobile networks. So it working for calls and texts makes sense, as a vzw phone. You could use patched Odin and flash a different (open) rom, but first you should verify that the device really is unlocked from vzw.
Best way to do that would probably be to insert another carriers sim card and see if it can make calls / texts. If not, it's not unlocked. But are you saying everything works now except mobile data? IOW, no internet access?
I had an international sim card at hand and I put it in. Interestingly the APN settings are no longer blocked. But, I do get a notification from setup wizard saying the inserted sim is not from Verizon and some services may not be available. But, messaging still seemed to work and I was also receiving 4G.
Aisp said:
I had an international sim card at hand and I put it in. Interestingly the APN settings are no longer blocked. But, I do get a notification from setup wizard saying the inserted sim is not from Verizon and some services may not be available. But, messaging still seemed to work and I was also receiving 4G.
Click to expand...
Click to collapse
Oh then yer okay. That message from verizon can be gotten rid of a couple of ways; 1) use adb commands to disable the specific packages 2) use patched Odin and flash a different rom
VZW is the only rom I think that does that, and it's very annoying. I don't remember exactly which packages have to be disabled, but search google and use xda and vzw in keywords and u should find it.
The 2nd option would be my choice. It would do away with vzw crap and with an open rom you may find volte and vowifi will work also.
cheers
Thank you so much for your reply. That sounds great! To just give it a try, I tried putting in a TMobile sim and phone restarted to install software for TMobile. After that the APN settings were unlocked and now I am also able to connect to the internet using my US Moblile sim. The only problem is the the network mode is greyed out.
This rom I think only recognizes network from major telecom providers. So, just flashing with an unlocked rom would just help to unlock all the features and also remove telecom specific crap. I will try to flash it today.
Thank you again!
I also just flashed the stock firmware which is fully unlocked. And there is no bloatware from telecom OEM's. I am now able to use the network and set the APN's, but the Network Mode is still greyed out. Is it possible to know why? I am guessing that if the phone is fully unlocked, I should be able to change the Network Mode. Is there any other info that I can give you to help understand what is happening? I do not see vowifi as well.