Related
Hi,
First time posting here. I have a Le MAX 2 x822 with a custom ROM from the Chinese vendor (55.66.001133S (stable) and want to install CM13 (http://forum.xda-developers.com/le-max-2/development/cm13-max2-s19-umbrellateam-spainteam-t3471863).
I have read the basic steps:
1. install adb driver (which one should I get?)
2. unlock bootloader
3. install TWRP (which one should I get?)
4. flash CM13 rom
I wanted to know if I have to flash a stock ROM before getting CM13 or can I just follow the steps above directly.
Thank you
haseyo1 said:
Hi,
First time posting here. I have a Le MAX 2 x822 with a custom ROM from the Chinese vendor (55.66.001133S (stable) and want to install CM13 (http://forum.xda-developers.com/le-max-2/development/cm13-max2-s19-umbrellateam-spainteam-t3471863).
I have read the basic steps:
1. install adb driver (which one should I get?)
2. unlock bootloader
3. install TWRP (which one should I get?)
4. flash CM13 rom
I wanted to know if I have to flash a stock ROM before getting CM13 or can I just follow the steps above directly.
Thank you
Click to expand...
Click to collapse
Just boot into recovery mode wipe advanced select all exept internal sotarage and usb. The go install zip file and reboot system. Thats all
georgesalo said:
Just boot into recovery mode wipe advanced select all exept internal sotarage and usb. The go install zip file and reboot system. Thats all
Click to expand...
Click to collapse
Thank you for the answer!
I've read some places that getting the adb driver on Windows 10 doesn't always work. Do you know where I can get one that works?
Also, which version of TWRP should I get? Can I use the official? (http://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611)
haseyo1 said:
Thank you for the answer!
I've read some places that getting the adb driver on Windows 10 doesn't always work. Do you know where I can get one that works?
Also, which version of TWRP should I get? Can I use the official? (http://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611)
Click to expand...
Click to collapse
this works for me!!! i dont know where you can find adb drivers just google it
http://forum.xda-developers.com/le-max-2/development/twrp-recovery-3-0-2-f2fs-letv-max2le-t3486134
Hello! i have used the search tool to see if there is a custom recovery for my device but i am unable to find any. I found TB-X103F custom twrp but im unsure about trying it!.
I may be rather early as this tablet only recently came out.
Lenovo X 104F- 1 GB RAM
I own the same tablet , found also a solution to root it . Just to try other Custom ROMs you do not need to root it ....it is project TREBLE compatible ! This means that you can , with fastboot and ADB , install various GSI images )
ATTENTION : this method does not allow you to go back easily to the factory ROM !!! If you wish to do so, you need to root your Tab and make a full backup with one of the solutions described here in XDA ! Titanium or so .
I have installed Lineage 15 (Oreo 8) on my device and it runs without any problem ......Custom ROMs based on Pie make still some issues ! Be aware , that for one or other reason on my tablet i can install only ROM that is less than 1 GB after unzip !!!
Artarun said:
I own the same tablet , found also a solution to root it . Just to try other Custom ROMs you do not need to root it ....it is project TREBLE compatible ! This means that you can , with fastboot and ADB , install various GSI images )
ATTENTION : this method does not allow you to go back easily to the factory ROM !!! If you wish to do so, you need to root your Tab and make a full backup with one of the solutions described here in XDA ! Titanium or so .
I have installed Lineage 15 (Oreo 8) on my device and it runs without any problem ......Custom ROMs based on Pie make still some issues ! Be aware , that for one or other reason on my tablet i can install only ROM that is less than 1 GB after unzip !!!
Click to expand...
Click to collapse
Care to share any links?
Since Lenovo/Motorola added our E10 / TB-X104F to the recovery tool I decided to play around with hacking apart this awesome and terrible table. Long-story-short... you can unlock it using the normal FASTBOOT commands. A MAGISK modified BOOT.IMG does work which gave me full root access to the tablet. If people are interested I'll write up a guide... but a little bit of research on MAGISK and grabbing the Lenovo recovery tool will be your first step if starting from scratch.
Next step is getting a recovery image. I'm currently looking into getting this tablet into the TWRP BUILDER queue, but at the time of this writing their queue is full.
UPDATE: Just saw the TWRP BUILDER team has had everything on hold for over a month now. Guess I'll need to see about building this locally in my free time.
kpfx said:
Since Lenovo/Motorola added our E10 / TB-X104F to the recovery tool I decided to play around with hacking apart this awesome and terrible table. Long-story-short... you can unlock it using the normal FASTBOOT commands. A MAGISK modified BOOT.IMG does work which gave me full root access to the tablet. If people are interested I'll write up a guide... but a little bit of research on MAGISK and grabbing the Lenovo recovery tool will be your first step if starting from scratch.
Next step is getting a recovery image. I'm currently looking into getting this tablet into the TWRP BUILDER queue, but at the time of this writing their queue is full.
UPDATE: Just saw the TWRP BUILDER team has had everything on hold for over a month now. Guess I'll need to see about building this locally in my free time.
Click to expand...
Click to collapse
I've been looking for one also and was gonna see about working on one
Artarun said:
I own the same tablet , found also a solution to root it . Just to try other Custom ROMs you do not need to root it ....it is project TREBLE compatible ! This means that you can , with fastboot and ADB , install various GSI images )
ATTENTION : this method does not allow you to go back easily to the factory ROM !!! If you wish to do so, you need to root your Tab and make a full backup with one of the solutions described here in XDA ! Titanium or so .
I have installed Lineage 15 (Oreo 8) on my device and it runs without any problem ......Custom ROMs based on Pie make still some issues ! Be aware , that for one or other reason on my tablet i can install only ROM that is less than 1 GB after unzip !!!
Click to expand...
Click to collapse
I can attest to this, I flashed the last Resurrection Remix Oreo GSI (12/21/18) and a (Magisk) rooted kernal I got from firmware (Lenovo MOTO Smart Assistant). And so far everything seems to be working fine.
So I also flashed resurrection remix pie gsi... it works as well... only thing is it doesn't come with gapps... and without twrp i can't flash a gapps package. The resurrection remix I used was the final oreo build... zt has gapps pre-installed... you have to register the device with google because it is not certified... but after that everything seem good. One thing to mention is both the oreo and pie builds are "go edition" so some features are missing because of that... one in particular I noticed is notification access for 3rd party apps... go edition devices don't have that feature
Do either of you all have a step-by-step guide to rooting the device and installing either the Lineage or RR ROM?
Also, what works and what doesn't on the tablet afterwards?
44Guest said:
Do either of you all have a step-by-step guide to rooting the device and installing either the Lineage or RR ROM?
Also, what works and what doesn't on the tablet afterwards?
Click to expand...
Click to collapse
Use Lenovo MOTO Smart Assistant to repair your tablet (you wont actually repair tablet, just using to get firmware)
Follow steps to get to download the firmware (it will save to ProgramData folder, its hidden folder... in widows anyway)
Take the boot image (boot.img) from firmware folder and transfer to storage on tablet
Instal magisk manager and use to patch the boot image you transfered from computer
Transfer patched boot image back to computer
Download the latest oreo gsi for resurrection remix or lineage
Use fastboot to unlock bootloader
Use fast boot to flash gsi
Use fastboot to flash patched boot image
Google anything you need help with...
I used the resurrection remix oreo also because there is a build that has gapps pre-installed... the pie version works but doesn't have gapps pre-installed and without twrp I couldn't find a way to install them
After tablet boots up install magisk manager and you will be rooted
You will need to register your device with google because it will not be certified... that was a pain to get done even though the process is pretty straight forward
So far only "issues" I have encountered are not actually issues they are due to the fact that the resurrection remix gsi is android "go edition" I haventr tried lineage because I like the customization options that resurrection remix offers
Here is the magisk patched boot image I made so you can skip that part...
https://www.mediafire.com/download/x4d3xp8w3e8bw3g
Just to confirm the sequence of events (and thank you for the magisk-altered file):
1. Move magisk-modified boot image to the tablet.
2. Download latest version of Lineage OS or RR; move that file to the tablet as well
3. DL magisk manager APK and move that to the tablet as well
3. Boot the tablet into Bootloader and flash the new OS file first
fastboot flash recovery file.img
4. Then flash the boot.img altered by magisk
fastboot flash recovery boot.img
5. Reboot the tablet (will it load with the new ROM?)
6. Install magisk manager
Questions on the flashing:
A: Do you flash the .img and the ROM through fastboot shell command on your computer or do you install them in recovery mode?
4niner4 said:
Just to confirm the sequence of events (and thank you for the magisk-altered file):
1. Move magisk-modified boot image to the tablet.
2. Download latest version of Lineage OS or RR; move that file to the tablet as well
3. DL magisk manager APK and move that to the tablet as well
3. Boot the tablet into Bootloader and flash the new OS file first
fastboot flash recovery file.img
4. Then flash the boot.img altered by magisk
fastboot flash recovery boot.img
5. Reboot the tablet (will it load with the new ROM?)
6. Install magisk manager
Questions on the flashing:
A: Do you flash the .img and the ROM through fastboot shell command on your computer or do you install them in recovery mode?
Click to expand...
Click to collapse
So you want all files on the computer at first...
When you unlock bootloader it will wipe the tablet.
Flash the the gsi image then the magisk patched boot image using fastboot (there are instructions on xda regarding flashining gsi... you have to wipe system before flashing)
After tablet reboots to resurrection remix move the magisk manager apk to the tablet and install it... open magisk manager and you should have magisk installed giving you root and so much more.
Before you attempt this make sure you familiarize yourself with all the steps... search google/xda.
Also... I will say this... I tried to just root the tablet first but it wouldn't boot after so I tried to fix it using the Lenove tool and it failed... flashing the resurrection remix gsi with the patched boot image saved me from a lot of headache and wasted time... I would prefer if it was not a "go edition" rom but its still better than stock.
Sorry, more follow-up questions:
1. My bootloader is unlocked. It did not wipe the device (I used the "developer options" in the "Settings" menu to do it. Fastboot indicates the bootloader is unlocked. Do I need to redo unlocking the bootloader? For what it's worth, all my attempts to flash everything with my presumably unlocked bootloader have been unsuccessful.
2. Where did you find a .gsi of Lineage OS 15 for the Lenovo TB-X104F? I cannot find one.
Thanks
4niner5 said:
Sorry, more follow-up questions:
1. My bootloader is unlocked. It did not wipe the device (I used the "developer options" in the "Settings" menu to do it. Fastboot indicates the bootloader is unlocked. Do I need to redo unlocking the bootloader? For what it's worth, all my attempts to flash everything with my presumably unlocked bootloader have been unsuccessful.
2. Where did you find a .gsi of Lineage OS 15 for the Lenovo TB-X104F? I cannot find one.
Thanks
Click to expand...
Click to collapse
Make sure you fastboot flash unlock and fastboot flash unlock_critical. Just look an here for the links for lineage gsi. It flashes just fine and is super easy. I have resurrection remix on my 104f. I'm trying to compile twrp for it right now but hard to do with kids lol also if you use the lenovo tool you can download the recovery files which has boot recovery and all that in it and you can use magisk to patch the boot.ing and then copy that to the Lenovo tool and replace the stock boot img then recover it and you now have a working patched boot.img. I went through the same thing
Any Luck?
Any luck with that twrp? I'm willing to test it out...
Would like to be able to use the resurrection remix pie rom with gapps. So I can hopefully give some helpful feedback... one warning I am an amateur at anything beyond using fastboot and some adb commands, but I can learn pretty quick if i have the time to spend...
Another warning I have a sub-par windows pc to work with (and its the wife's) it prob can't run Linux in VM.
Disable "go edition" in Resurrection Remix Oreo
Using root explorer...
Navigate to /system
Copy build.prop to internal storage
Navigate to where you saved copy of build.prop
Edit build.prop that you copied to internal storage...
Find ro.config.low_ram=true and change to ro.config.low_ram=false
Save and exit file
Copy edited build.prop back to /system (make backup of original and overwrite with edited one)
Set permissions to owner read write (rw-------)
Navigate to /sbin/.magisk/mirror/system
Copy build.prop to internal storage
Navigate to where you saved copy of build.prop
Edit build.prop that you copied to internal storage...
Find ro.config.low_ram=true and change to ro.config.low_ram=false
Save and exit file
Copy edited build.prop back to /sbin/.magisk/mirror/system (make backup of original and overwrite with edited one)
Set permissions to owner read write (rw-------)
Reboot
This allowed me to set notification access again (its disabled in "go edition")
Hey guys, I'm trying to follow the steps in this thread to install Resurrection Remix Pie on the tablet using fastboot but whenever I try to flash a ROM to the system partition I get a (remote: size too large) error.. Does anyone know why this could be? I've tried using flags like -S, I've wiped the partitions and I don't know what else I can try. I have tried with Lineage, AOSiP and RR GSIs.
Thanks.
I cant get this to work.. What version of RR or Lineage OS works with tb-x104f?
up..................
I got the final version of rr oreo running fine... no luck with the latest rr pie unfortunately...
Anyone know if this is an A or AB device?
Hello dear modders,
making gcam work in miui 10 global is somehow a challege to us.
Enabling camera2api from the build.prop file does not work.
but as a developer danzblue in the miui forums have gave us the magisk module to enable the gcam support in our redmi 5a oem miui 10.
till the previous nougat base it was working but now in oreo base his mod also does not work....(or alone!).
I have made the mod work in my redmi 5a in latest miui 10 oreo base.
just follow my steps below:
1) first of all you must be on the oreo base miui 10 latest global OCKMIXM
2) now reboot to fastboot mode:
power off device. now hold the volume down button, turn on the power and don't release volume button until fastboot is shown on display
3) flash or boot the twrp recovery
https://forum.xda-developers.com/xiaomi-redmi-5a/development/twrp-3-2-3-2-riva-oreo-t3892510
4) flash latest magisk - https://github.com/topjohnwu/Magisk/releases
5) install magisk module from this link - http://en.miui.com/thread-4817920-1-1.html
6) reboot after installation complete, now your device might be in bootloop
7) restart to twrp recovery
8) perform factory data wipe, don't restart now
9) now goto twrp advanced - tools - enable camera2api- flash
10) restart and now you have gcam support enabled in your device along with miui 10 built in camera.
11) download gcam from this site https://www.celsoazevedo.com/files/android/google-camera/dev-suggested/
in my experience, gcam 6, only this version supported on our device https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_RazerPhone2_V2a.apk
but whenever I clicked the photo, app was force closed. (as my phone is 2gb ram variant I don't know the result of 3gb ram)
later I tried gcam 5 this worked fine for me https://f.celsoazevedo.com/file/gcamera/GCam-5.1.018-Pixel2Mod-Arnova8G2-V8.3b1.apk
you can test other versions and let me know
for further I will update this post for working list of gcam in our device.
Working on EU-ROM 9.8.1 (xiaomi.eu)
1) Goto twrp advanced - tools - enable camera2api
2) Restart and installation MGC_6.1.021_RazerPhone2_V2a.apk
3) Enjoy
Hello, I'm a new user here
Thanks for the guide, but I have some questions about it:
1. Does this process establish root access?
2. Is it necessary to unlock the bootloader?
3. Will I loose all data in the phone?
Thank you very much.
PLV10 said:
Hello, I'm a new user here
Thanks for the guide, but I have some questions about it:
1. Does this process establish root access?
2. Is it necessary to unlock the bootloader?
3. Will I loose all data in the phone?
Thank you very much.
Click to expand...
Click to collapse
1. No
2. Yes
3. Unlocking bootloader requires wiping of data so
NaAnBcEhEuL9A8K7 said:
1. No
2. Yes
3. Unlocking bootloader requires wiping of data so
Click to expand...
Click to collapse
Ok, thank you for the information.
Today, I'm not sure what to do, beacuse I have the phone since april 2018, so it has a lot of data and apps I'm thinking about the possibility of istalling a custom ROM too!
Best regards.
PLV10 said:
Ok, thank you for the information.
Today, I'm not sure what to do, beacuse I have the phone since april 2018, so it has a lot of data and apps I'm thinking about the possibility of istalling a custom ROM too!
Best regards.
Click to expand...
Click to collapse
Whatever you want to do, installing custom rom or gcam you require to unlock bootloader, unlocking bootloader involves wiping your data, so backup the stuff you need to a PC or another phone or the cloud.
Even if you are trying to bypass bootloader lock it also involves wiping your data so
Backup
NaAnBcEhEuL9A8K7 said:
Whatever you want to do, installing custom rom or gcam you require to unlock bootloader, unlocking bootloader involves wiping your data, so backup the stuff you need to a PC or another phone or the cloud.
Even if you are trying to bypass bootloader lock it also involves wiping your data so
Backup
Click to expand...
Click to collapse
Yes, I can backup, but not ALL the information, let alone APP's settings. So, at this moment, I'n thinking... > I'll ask here at XDA if I have any doubt when I have made a decision.
Thanks. Best regards
sjcbank said:
Working on EU-ROM 9.8.1 (xiaomi.eu)
1) Goto twrp advanced - tools - enable camera2api
2) Restart and installation MGC_6.1.021_RazerPhone2_V2a.apk
3) Enjoy
Click to expand...
Click to collapse
the night mode doesn't works.
Does this method still works on miui 11?
If so what are the chances of getting stuck in bootloop while enabling camera2api? I have already rooted my phone with magisk
Hitrock said:
If so what are the chances of getting stuck in bootloop while enabling camera2api? I have already rooted my phone with magisk
Click to expand...
Click to collapse
Zero
Hello,i am a new user here ?
I have some questions about this
Can i download the gcam without any flash process ?
It requires flashing process before downloading the app?
Which version is required of gcam for redmi 5a?
I want to share a fully working TWRP for Redmi K30 (phoenix). It also works for Poco X2 (phoenixin).
This is not my work. I am just sharing it. All credits go to wzsx150 (a Chinese developer) who created this TWRP. I just made the batch file simple because the original one was written in Chinese and I don't understand at all. I have tested this TWRP many times and everything works including decryption, mounting partitions, etc.. You may need to change language because everything is written in Chinese by default. I attached English TWRP interface for you to set language easily.
TWRP with simplified batch file
Mod edit: link removed
Instruction for newbie
-Unlock bootloader
-Put your phone into fastboot mode
-Connect to PC (require driver installed)
-Extract downloaded TWRP zip
-Double click !flash.bat in extracted folder
Done
I am new to this, please explain, i have to just install recovery by cmd command only?
I want twrp for flashing xiaomi.eu
gauravgolakiya said:
I am new to this, please explain, i have to just install recovery by cmd command only?
I want twrp for flashing xiaomi.eu
Click to expand...
Click to collapse
You don't need to flash TWRP to flash xiaomi.eu for K30 because the ROM for this model was released to flash through fastboot mode. They didn't release the ROM in flashable zip form like any other models.
Unlock bootloader
Download and unzip the ROM
flash it through fastboot
Done
Sithu Htun said:
You don't need to flash TWRP to flash xiaomi.eu for K30 because the ROM for this model was released to flash through fastboot mode. They didn't release the ROM in flashable zip form like any other models.
Unlock bootloader
Download and unzip the ROM
flash it through fastboot
Done
Click to expand...
Click to collapse
yes i already flashed that, but they announced that next update will installed by twrp. thats why i needed
gauravgolakiya said:
yes i already flashed that, but they announced that next update will installed by twrp. thats why i needed
Click to expand...
Click to collapse
Unlock bootloader
Put your phone into fastboot mode
Connect to PC
Unzip TWRP zip
Double click !flash.bat
Done
thank you
The link isn't working
Hi there dear OP,
Since you are sharing the work of someone else, there are at least two issues involved:
1. You need permission from the developer to post this
2. If you do so, you have to also publish the sources of the TWRP to comply with GPL requirements.
For this reason, link is removed and thread closed.
If you solve the above issues, PM me and I'll be happy to reopen the thread.
Lupin The Third
Your friendly forum moderator
This guide will show you how to root your Nokia 4.2. This has been tested on TA-1157 and is working fine.
**Important** - If fastboot does not recognise your device In step 5, You need to download a driver. Here is the link: Download Driver (by Beebom)
Search up how to install custom driver and install it to the “Android” device.
Requirements:
Nokia 4.2 with unlocked bootloader
USB Cable
ADB/Fastboot.
Python
Your current ROM file
Internet.
Downloads:
ADB Installer (by Snoop05 on xda) : Download
Python : Download
Payload Dumper (vm03 on github): Download ( Click on code and select "download ZIP")
Magisk APK (on your phone) : Download APK ( Scroll down and you will find the APK file)
Code:
** I have only tested this on TA-1157. Other models may not work, but technically they should work.**
** Your warranty is now Void**
Step 1
Enable USB debugging on your phone. If you do not know how to do this, Search it up. It is easy.
Once that's enabled, Connect your phone to your PC/Laptop and open the command prompt (cmd) and type adb devices. It should show your device in the list.
Step 2
Locate the Python folder. To do this, simply type "python" in the start menu and click open file location. Then, Right click on "python.exe" and open properties. Then click open file location.
Once the folder opens, make sure to not close it.
Download the payload dumper.py which I have linked in the downloads section. Extract it and place the contents of the file in the Python folder.
Step 3
Download the ROM file. If you are using lineage OS on your Nokia 4.2, Download that file. If you are using the Stock rom, Download that. It should be a .zip file.
Extract the stuff from that file and take payload.bin and move it to the python folder.
Now, Open cmd in that directory by right clicking and opening cmd. Then, Type the following commands,
Code:
python -m pip install -r requirements.txt
then type,
Code:
python payload_dumper.py payload.bin
Once it is done extracting, Open the "output" folder. There you will find the "boot.img" file
Step 4
Use your USB cable or Google drive to transfer the "boot.img" to your phone. Once you have done that, Download the Magisk APK on your phone and install the app. (APK link in downloads section)
Once you have installed Magisk, open it and click "Install". Select the file from your phone and wait a few minutes for magisk to patch the "boot.img" file.
Once Magisk is finished patching, there will be a new file which magisk has created. Transfer the patched file to your computer via the USB cable or Google drive and make sure to rename it as "magisk_patched.img"
Step 5
You are almost done! Open CMD in the folder where you saved the "magisk_patched.img" and type
Code:
adb reboot bootloader
then type
Code:
fastboot flash boot magisk_patched.img
Once done, Reboot your phone and Voila! Your phone is now rooted. Make sure to open the magisk app and check it.
If you need any help or you get any errors, post it down here below.
Also, If this helped you, consider liking the post!
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Cool!
If you have any problems, let me know.
Geoperson8 said:
Cool!
If you have any problems, let me know.
Click to expand...
Click to collapse
I'm typing this reply, in my 4.2 with LOS 20 and root with Magisk 25, this guide was too easy to understand, thanks a lot!
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Bro i would be very thankful if you told me how you installed lineage os 20 i have the stock ROM rooted
Love from India
thecubernoober said:
Bro i would be very thankful if you told me how you installed lineage os 20 i have the stock ROM rooted
Love from India
Click to expand...
Click to collapse
I could help you with that
Geoperson8 said:
I could help you with that
Click to expand...
Click to collapse
Yes please i would be very thankful
Geoperson8 said:
I could help you with that
Click to expand...
Click to collapse
Please tell me how to install lineage os 20 in Nokia 4.2
King root not work connection problem
___za_x4_pan___ said:
King root not work connection problem
Click to expand...
Click to collapse
Personally, I do not recommend Kingroot as it is not very reliable and safe. Instead, you can follow this guide or follow other guides on youtube.
hello @Geoperson8 I have currently installed lineage os 20 on my nokia 4.2
But i am facing an issue with rooting my phone when I flash the patched boot.img it asks me for factory reset after factory reset one important part of flashing lineage os is flashing the vendor image but when I flash teh vendor image after flashing magisk my wifi does not work and that's what happens when you don't flash the vendor image but my wifi does not work even after flashing teh vendor image so please help me with rooting my nokia 4.2
RZavala_2003 said:
I'm typing this reply, in my 4.2 with LOS 20 and root with Magisk 25, this guide was too easy to understand, thanks a lot!
Click to expand...
Click to collapse
did you have to format you os
thecubernoober said:
did you have to format you os
Click to expand...
Click to collapse
No bro, i only read this guide and i rooted successfully!
thecubernoober said:
hello @Geoperson8 I have currently installed lineage os 20 on my nokia 4.2
But i am facing an issue with rooting my phone when I flash the patched boot.img it asks me for factory reset after factory reset one important part of flashing lineage os is flashing the vendor image but when I flash teh vendor image after flashing magisk my wifi does not work and that's what happens when you don't flash the vendor image but my wifi does not work even after flashing teh vendor image so please help me with rooting my nokia 4.2
Click to expand...
Click to collapse
I would recommed to flash the vendor image before doing any modifications on your phone. Hope this helps.
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Can you tell me where did you find the vendor for that model? I have the same
imthetoadXD said:
Can you tell me where did you find the vendor for that model? I have the same
Click to expand...
Click to collapse
I can reply to that
So I found the firmware from the lineage os page section where it says switch back to stock and there is the firmware given for Android 11
Nokia 4.2 ROMs, Kernels, Recoveries, & Other Devel
Improve your Nokia 4.2's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Refer this page for the link of stock firmware
Just so you guys know, If you need any help. Feel free to ask me.
thecubernoober said:
I can reply to that
So I found the firmware from the lineage os page section where it says switch back to stock and there is the firmware given for Android 11
Nokia 4.2 ROMs, Kernels, Recoveries, & Other Devel
Improve your Nokia 4.2's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Refer this page for the link of stock firmware
Click to expand...
Click to collapse
Is your lineage OS and root working fine?