My Realme gt2 pro RMX3300 in bootloop after i try to install global rom by fastboot , I still able to enter fastboot mode and the bootloader is unlock , can any one help to solve the problem and back to the china rom again
what's the question with fastboot? just flash the partitions
Code:
fastboot flash <partition> <file>
aIecxs said:
what's the question with fastboot? just flash the partitions
Code:
fastboot flash <partition> <file>
Click to expand...
Click to collapse
Can you help with more details and the steps how to install the china rom again to fix the bootloop problem
unpack the ROM. open cmd.exe and cd into directory. type dir to list files. select terminal output with mouse, copy content with enter key. paste the file list from terminal here in [CODE]tags[/CODE]
I am stuck in bootloop and can access fastboot mode tii but have a problem, low battery and I don't seem to be able to charge the phone so I can't flash anything... Any hope for me??
stop boot-loop, enter fastboot
If I enter fastboot the phone doesn't charge in fastboot mode, and anything I try to do gives me an error due to low battery levels, but I can't charge the phone because even if I power off from fastboot mode the phone restarts itself to a bootloop and so on...
Related
So I tried to change the ROM of my phone because the vendor's one had malware but it was worse, my phone is stuck at boot screen and can't do anything with it.
First I tried to install a ROM with TWRP, it installed but it was just a black screen, you could only see the battery status.
Then I tried to install the global ROM that is on the official xiaomi site but it didn't work and it locked my phone.
Now I can't use TWRP, please help me. I am desperate.
Miflash isn't detecting the phone, but the PC does cause it listed under Android Phone->Android ADB Interface on device manager.
1st:
http://en.miui.com/thread-277276-1-1.html
Once you rebooted it into download mode, use this:
http://en.miui.com/thread-254606-1-1.html
My PC is no longer detecting the phone, only detects Qualcomm 9008
Ok, it is working till the miflash step it says "receiving hello packet" in red
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Feriol said:
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
After that I use miflash?
Failed after second command
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the device is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Benz83 said:
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the d: evice is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Click to expand...
Click to collapse
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
andrespm said:
After that I use miflash?
Failed after second command
Click to expand...
Click to collapse
After you run 'fastboot devices' is anything listed? Usually a string of numbers. If not then the computer isn't seeing your device.
Try rebooting the computer, and trying different USB leads and ports if possible and try again.
Using this method you don't have to use MiFlash, and is for when MiFlash doesn't work.
Once your phone is working again you can try again to install another ROM using traditional methods.
andrespm said:
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
Click to expand...
Click to collapse
Hello, i try the steps you give for EDL, after it the screen is not black but i see again the logo MI, i can go on fastboot mode but if i try to flash anykind of rom i get error "FAILED: remote: Critical partition flashing is not allowed)
other solution?
I think the only way is the unlock bootloader, but sincerally i dont know how it work. i did the steps online and the sim is on another device not xiaomi. I will get a sms from xiaomi with some kind of code? and after it how can use for bootloader?
There is another solution? I thinking....but why i cant use the original rom ?? always about the bootloader lock?
___
now i see another post ...use both volume to enter in download mode and on the miflash i saw port com 49, load a rom and start to flash it ...but....another error : The system can not find the file specified (0x80070002: Max buffer sector is 256)
___
This Morning i received the unlock code. When i use the tool stuck on 50℅
i flashed a rom on my device(asus zenfone 2 laser ZE550kl) and after flashing i tried try to reboot to system..even i tried removing battery and starting by pressing power but still it goes fastboot mode. I tried all the buttons combinations,Wiped n number of times,....but still after flashing the rom it starts directly in fastboot mode
Thanks in advance:
PLZZ help
Details:
Device:Asus zenfone 2 laser (ZE550kl Z00ld)
ROM : Viper-Z00L-7.1.2-Python-v2.1-20170721-OFFICIAL
Sidd_23 said:
i flashed a rom on my device(asus zenfone 2 laser ZE550kl) and after flashing i tried try to reboot to system..even i tried removing battery and starting by pressing power but still it goes fastboot mode. I tried all the buttons combinations,Wiped n number of times,....but still after flashing the rom it starts directly in fastboot mode
Thanks in advance:
PLZZ help
Details:
Device:Asus zenfone 2 laser (ZE550kl Z00ld)
ROM : Viper-Z00L-7.1.2-Python-v2.1-20170721-OFFICIAL
Click to expand...
Click to collapse
how about getting into recovery, wiping system and reflashing a new rom?
BatDroid said:
how about getting into recovery, wiping system and reflashing a new rom?
Click to expand...
Click to collapse
tried that 2 times...
i had the same problem..any woraround guys?
Hi , in your place I will download latest stock firmware for your device and extract , boot.img , system.img , recovery.img and also fastboot.img if you have inside your stock firmware.
Next install minimal adb&fastboot tool :
Download link:
https://androidfilehost.com/?fid=745425885120698566
How to install:
https://forum.xda-developers.com/showthread.php?t=2317790
Example how to flash those files from command line :
First check if your device is recognized on your pc :
write command in adb&fastboot terminal tool :
fastboot devices (you should see some numbers )
Now put those files inside adb folder where you installed adb&fastboot terminal for example :
C:/adb/
Now flash each file :
fastboot flash boot boot.img (and press Enter)
fastboot flash recovery recovery.img -||-
fastboot flash system system.img -||-
fastboot flash fastboot fastboot.img -||-
now :
fastboot reboot -||-
Now your device will reboot and it will take some time to load for the first time if it doesn't boot to system just put your device again into fastboot mode , open adb&fastboot terminal and write:
fastboot boot boot.img and wait little bit to boot up , if not try :
fastboot boot system.img ...
Before trying other options, I do suggest you to remove and replace the battery when the phone is disconnected from your PC and possibly when it's powered off. Then restart the phone in "Fastboot mode" by pressing VolumeUP+PowerButton keys until the phone vibrates. This helped me a lot and I was not able to find this trick in the dozen of discussions, except one, that I read about this topic.
Hello recently an automatic firmware update happened on my phone , after the update has finished my phone is now stucked on the EMUI after booting up. My phone has bootloader unlocked
update:
i flashed the stock rom using adb & fastboot
i flashed these
ramdisk.img
kernel.img
recovery-ramdis.img
system.img
wiped / format the data and the cache partition
Was all succcess but now im getting stucked on the ""your device has been unlocked and can't be trusted" screen
pls send help
upppppppp pla help
im still getting stucked please help
up i need help please
bumpy uppp
up please help
then try to go to erecovery by pressing volume up while the your device has been unlocked and can't be trusted
i can help if u like remotly
Did you find a solution
anonpurged09 said:
update:
i flashed the stock rom using adb & fastboot
i flashed these
ramdisk.img
kernel.img
recovery-ramdis.img
system.img
wiped / format the data and the cache partition
Was all succcess but now im getting stucked on the ""your device has been unlocked and can't be trusted" screen
pls send help
Click to expand...
Click to collapse
install minimal adb and fastboot tool (for quickness) on window's computer
Put your phone back into fastboot mode (insert usb with mobile switched off whilst holding the volume up button and plugged into your laptop)
Check your bootloader's status with this command fastboot oem device-info And then go back and lock your bootloader again using the fastboot oem lock command then restart your phone in recovery mode and factory reset it .....you may have to put your phone's serial number at the end off fastboot oem lock ************* you can get it using the fastboot devices command,just copy and paste serial " at end of your command then use the fastboot oem device-info command again to check that you have been successful.....Failing that you might have to re-flash and try a fresh download of firmware stock rom from a different source as it might be corrupted
Good luck.
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Advanced07 said:
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Click to expand...
Click to collapse
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Thanks I'm gonna give these a try and I will let you know how it goes
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Tried all the ADB commands and they all failed, gonna try to use the SD card method.
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Device won't enter dload mode either. I hold the 3 buttons but it just bootloops.
Sorry, I'm out of ideas (with the locked bootloader).
-Alf- said:
Sorry, I'm out of ideas (with the locked bootloader).
Click to expand...
Click to collapse
I'm as well, the only thing that might work is removing and placing the battery ribbon cable again but I don't have the glue to close the case. Should I still try it?
Advanced07 said:
but I don't have the glue to close the case. Should I still try it?
Click to expand...
Click to collapse
You should try it, why not.
IMO it might be the HW problem , dead memory or damaged motherboard, (fastboot commands are not working).
-Alf- said:
You should try it, why not.
IMO it might be the HW problem , dead memory or damaged motherboard, (fastboot commands are not working).
Click to expand...
Click to collapse
The fastboot commands are working but it says I don't have permission to do it or something along those lines it refuses to execute it
Advanced07 said:
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Click to expand...
Click to collapse
Same phone and same thing happened to me. What's different is that twrp recovery works.
It all started when I unlocked the bootloader with PotatoNV. I unlocked it with the fastboot oem unlock MYUNLOCKCODE command.
Then i flashed twrp: fastboot flash recovery_ramdisk d:\twrp.img
Then whatever happened, I started seeing the error "AP_S_ABNORMAL 64" in fastboot mode, but running commands was fine.
I deleted everything by entering the codes below with fastboot mode.
fastboot erase system -w
fastboot erase userdata
Then I reinstalled twrp recovery by entering the codes below and flashed a custom rom.
fastboot flash recovery_ramdisk d:\twrp.img
fastboot flash system d:\MyCustomRom.img
Suddenly what do I see.
When I rebooted with the fastboot reboot command, twrp was constantly opening. The system would not boot at all. I was desperately doing everything I could think of. Only one thing worked. I opened emui e-recovery by pressing the volume up, volume down and power keys at the same time. It was failing there and there was only one option; I clicked restart. The system booted this time, not twrp, and after a long wait, the main installation screen came.
biorap said:
I opened emui e-recovery by pressing the volume up, volume down and power keys at the same time. It was failing there
Click to expand...
Click to collapse
it is not e-recovery, this buttons combination triggers the installation of FW by the dload method.
biorap said:
fastboot erase system -w
fastboot erase userdata
Click to expand...
Click to collapse
Use stock Recovery - Wipe cache partition & Factory reset
biorap said:
flashed a custom rom
Click to expand...
Click to collapse
How to install Treble GSI ROMs on Kirin-devices:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
-Alf- said:
it is not e-recovery, this buttons combination triggers the installation of FW by the dload method.
Use stock Recovery - Wipe cache partition & Factory reset
How to install Treble GSI ROMs on Kirin-devices:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Click to expand...
Click to collapse
Thank you for your clarify.
Is it possible to use stock recovery when i flash a custom rom via fastboot mode? I mean; do i have to use twrp when i wanna flash a custom rom? Is it possible to use custom rom with stock recovery?
biorap said:
Thank you for your clarify.
Is it possible to use stock recovery when i flash a custom rom via fastboot mode? I mean; do i have to use twrp when i wanna flash a custom rom? Is it possible to use custom rom with stock recovery?
Click to expand...
Click to collapse
Have you read?
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
hi guys, i have a problem let me explain to u what heppened and all stuffs
(my phone is redmi 9)
firstly i decided to install a custom rom and i've unlock the bootloader and i suffered in this step and then i flahsed recovery with pixel experience recovery but when i enter to recovery mode the device just reboot then i flashed recovery with twrp, i try to enter to recovery but system declins and i tried many time and finally i get into twrp, i wiped cach and i wiped all thing in list (i didnt remember but i deselect only sd card and otg maybe the problem was here and im newbie btw) and the wipe process successed, i tried flash rom with adb sideload but proccess failed idk why after that i tried flash recovery with shrp from fastboot but when i enter to fastboot using volum down + power off the fastboot still active for 5secs and exit i tried to boot into this recovery but when u complete the first step (i forget the name) but the output was like this:
[xxxxxxx]: 2.001sec
[booting]: (no input device)
command error
in booting step the fastboot exit and then when i tried many times i did this command: fastboot reboot fastboot
after this the device cant get into recovert mode or fastboot mode (when i try enter to fastboot mode the phone shows redmi logo and close immediaty 1sec or less) (system now is destroyed and i try to boot into os the phone stuck on redmi logo)
there is any way to enter to fastboot mode in this situation? i need help plz and thanks
also sorry for bad english
BESHIZUMOTO said:
hi guys, i have a problem let me explain to u what heppened and all stuffs
(my phone is redmi 9)
firstly i decided to install a custom rom and i've unlock the bootloader and i suffered in this step and then i flahsed recovery with pixel experience recovery but when i enter to recovery mode the device just reboot then i flashed recovery with twrp, i try to enter to recovery but system declins and i tried many time and finally i get into twrp, i wiped cach and i wiped all thing in list (i didnt remember but i deselect only sd card and otg maybe the problem was here and im newbie btw) and the wipe process successed, i tried flash rom with adb sideload but proccess failed idk why after that i tried flash recovery with shrp from fastboot but when i enter to fastboot using volum down + power off the fastboot still active for 5secs and exit i tried to boot into this recovery but when u complete the first step (i forget the name) but the output was like this:
[xxxxxxx]: 2.001sec
[booting]: (no input device)
command error
in booting step the fastboot exit and then when i tried many times i did this command: fastboot reboot fastboot
after this the device cant get into recovert mode or fastboot mode (when i try enter to fastboot mode the phone shows redmi logo and close immediaty 1sec or less) (system now is destroyed and i try to boot into os the phone stuck on redmi logo)
there is any way to enter to fastboot mode in this situation? i need help plz and thanks
also sorry for bad english
Click to expand...
Click to collapse
Flash the device using SP Flash tool if your device has MEDIATEK G80 processor.
mvikrant97 said:
Flash the device using SP Flash tool if your device has MEDIATEK G80 processor.
Click to expand...
Click to collapse
i will try it now ty
mvikrant97 said:
Flash the device using SP Flash tool if your device has MEDIATEK G80 processor.
Click to expand...
Click to collapse
its require boot device in fastboot or no? cuz i cant access to fastboot
BESHIZUMOTO said:
its require boot device in fastboot or no? cuz i cant access to fastboot
Click to expand...
Click to collapse
Redmi 9 brick problem solution.
1.if you are above v11.0.8.0 then go and follow below link... https://forum.xda-developers.com/t/disable-authorization-and-unbrick-your-redmi-9.4228213/ ================================== 2.Else follow it...
forum.xda-developers.com