Huawei P9 Plus VIE-L09 Brick Fix With Bootloader Locked (Only EMUI 4.1.1) - Huawei P9 Plus Guides, News, & Discussion

*sorry in advance for my bad English, I am native Romanian*
Greetings everyone! For all of you that have a Huawei P9 Plus VIE-L09 (this will not work on other versions) and managed to somehow brick it, I've found a fix for it that requires no Custom Recovery or Bootloader OEM Unlock. Everything will work with everything stock.
Requirements:
*a Huawei P9 Plus VIE-L09 (will not work on other versions as I said earlier);
*a Micro SD Card (8GB Recommended and be somewhat recent and to not have Bad Blocks / Sectors);
*something from what you can copy files on the SD Card (I did it by putting the SD Card in another Phone and Connecting it to my PC and copying the files onto the Micro SD Card, but you can if you have a Micro SD Card slot too on your Laptop / PC, and you can use a Micro SD to SD Adapter too if u wish);
*phone charged at least at 50%;
*optional - Good Internet Connection cuz the file is quite large in GB.
First Download the file: https://www.mediafire.com/file/mvy7...IE-L09_EMUI_4.1.1_Firmware_With_Fix.zip/file;
*
Then have ur Micro SD Card Formated in FAT32 (If u copy the file to the SD Card through the phone, you can Format the Micro SD Card from the File Manager in the phone, it will be automaticly formated to FAT32);
*
After that you gotta open the "Huawei P9 Plus VIE-L09 Firmware Fix (1st).zip" and copy the "dload" folder onto the root of the Micro SD Card;
*
Then go to your Huawei and Insert the Micro SD Card in it;
*
After that you gotta boot up the phone in the Update Mode (Press both Volume - and Volume + at the same time then press the Power On button at the same time, then when the Huawei Logo shows release the Power On button, but keep holding the Volume - and Volume + buttons untill you see the Update Mode appears, if it refuses to go into that mode and just get stuck / hung on the Huawei Logo, put the Micro SD Card right when you see the Huawei Logo or right when you see the Update Mode);
*
The Update should install (it might give a error at 99%, but don't worry about it because the Update installed Successfully, it happened to me too);
*
Then get the Micro SD Card out of the phone and delete the old "dload" folder and copy the "dload" folder from the "HUAWEI P9 Plus Firmware C432B181 (2nd).zip" onto the root of the Micro SD Card (this will take a bit more than the previous one since this is the Software itself);
*
Then go back to the Update Mode as you did with the last Update (Press both Volume - and Volume + at the same time then press the Power On button at the same time then when the Huawei Logo shows release the Power On button, but keep holding the Volume - and Volume + buttons untill you see the Update Mode appears, if it refuses to go into that mode, put the Micro SD Card right when you see the Huawei Logo or right when you see the Update Mode), this Update will once again take more than usuall and don't panic if it gets stuck at a certain percentage and if it errors at 99%, just reboot it after it installed.
This was all, after all this your phone should be all up and running. The phone will be fresh and will ask you to set it up, so do it as you usually do.
CONGRATULATIONS! NOW YOU'VE SUCCESSFULLY UNBRICKED UR HUAWEI P9 PLUS VIE-L09.