Question Screen Protector Recommendation ( impact Protection+Fingerprint Unlock) - Samsung Galaxy S23 Ultra

Dear Community,
Received a S23Ultra and now I am on the lookout for a glass(but not limited to) screen protector which allows for working Fingerprint Unlock. I wrote Glass because i guess something like the whitestone dome would dissipate the impact forces in the glass protector, instead of transmitting it to the screen. Previously i know zagg had a impact protective Film, but now they changed their products too much, it confusing.
What is your experience ? what do you recommend ?
Thanks

My phone is due to arrive tomorrow and I'll be trying these screen protectors. I've looked through all the usual brands I'd use but the S21 was a nightmare with the fingerprint reader so I had to keep it bare in the end. So, I'm going to try these and will report back ASAP.
IMBZBK [4+4 Pack] UV for Samsung Galaxy S23 Ultra Screen Protector Tempered Glass Accessories 4 Pack UV Glass with 4 Pack Camera Lens Protector Samsung S23 Ultra Case Friendly Fingerprint Compatible https://amzn.eu/d/2myQ2Bt

Thanks, i just ordered the whitestone dome tempered glass, although in the past with my s10 I had it crack in my hose pocket . Most probably will order some other, based on other ppls experience as I expect it not to hold up too long

flasharom said:
My phone is due to arrive tomorrow and I'll be trying these screen protectors. I've looked through all the usual brands I'd use but the S21 was a nightmare with the fingerprint reader so I had to keep it bare in the end. So, I'm going to try these and will report back ASAP.
IMBZBK [4+4 Pack] UV for Samsung Galaxy S23 Ultra Screen Protector Tempered Glass Accessories 4 Pack UV Glass with 4 Pack Camera Lens Protector Samsung S23 Ultra Case Friendly Fingerprint Compatible https://amzn.eu/d/2myQ2Bt
Click to expand...
Click to collapse
Thanks for the tip, if that one has no issues with the touch, fingerprint. And no ugly cutout for the fingerprint area then its a good candidate

I bought this.
https://www.amazon.com/dp/B0BRJSJY2N?psc=1&ref=ppx_yo2ov_dt_b_product_details
Can't say I am overly happy with it though. I hate screen protectors with borders around the tempered glass, which wasn't mentioned in the description.

inwas looking at that one.also but you could see the black border in the pics and I'm am.guessingnit only has glue on the outer edge. I ordered the same.brand but the one that has the UV light.
jcsww said:
I bought this.
https://www.amazon.com/dp/B0BRJSJY2N?psc=1&ref=ppx_yo2ov_dt_b_product_details
Can't say I am overly happy with it though. I hate screen protectors with borders around the tempered glass, which wasn't mentioned in the description.
Click to expand...
Click to collapse

who cares? said:
inwas looking at that one.also but you could see the black border in the pics and I'm am.guessingnit only has glue on the outer edge. I ordered the same.brand but the one that has the UV light.
Click to expand...
Click to collapse
It's full adhesive.

jcsww said:
I bought this.
https://www.amazon.com/dp/B0BRJSJY2N?psc=1&ref=ppx_yo2ov_dt_b_product_details
Can't say I am overly happy with it though. I hate screen protectors with borders around the tempered glass, which wasn't mentioned in the description.
Click to expand...
Click to collapse
Hello, You are not too satisfied because of the borders or the sensitivity of the fingerprint?

arlequin2k3 said:
Hello, You are not too satisfied because of the borders or the sensitivity of the fingerprint?
Click to expand...
Click to collapse
A bit of both. It also doesn't want to stay fully down for me. The edges have lifted but there is a second one in the box. The rear camera covers though are great.

I brought this one, https://www.aliexpress.com/item/1005004031147265.html
I previously had one from Mocolo and their glass is silky smooth, you can definately feel the difference between other brands.
It also works fine with fingerprint sensor!

So, just to update this thread with my choice at the moment. I installed this whitestone dome glass, fingerprint works after readding my fingerprints(actually worked with the saved ones from the naked glass but slower/had to press firmly) and now it works better, but still noticebly slower than without the protector. Having face unlock with this also on, i find it a good tradeoff.
Tbh , on my s10+ had the same glass and on some vacation found it crack in my jeans , so lets see how long this will last. Probably i will buy some other cheaper brands mentioned here after this first glass cracks. They have a really cool and easy installation procedure, got a nice fit. The glass has some dots to ensure an even separation from the screen glass, so i guess the impact protection is better that way given the depth which allows the forces to dissipate inside the hardened glue.
BR and thank you for sharing your choices of glass protectors with fingerprint working!

I use Zeelot. Fp working good and it's tempered glass
Edit: Link included

Anyone tried Samsung official screen protector from s22ultra on 23ultra? Did it work?

aureum said:
Anyone tried Samsung official screen protector from s22ultra on 23ultra? Did it work?
Click to expand...
Click to collapse
based on https://www.androidheadlines.com/2022/09/galaxy-s22-ultra-s23-ultra-side-by-side-comparison.html , i would think it should .

idaadi said:
based on https://www.androidheadlines.com/2022/09/galaxy-s22-ultra-s23-ultra-side-by-side-comparison.html , i would think it should .
Click to expand...
Click to collapse
23ultra is more flat... i wonder if the adapter will also fit to align the screen protector. For s22u is half price cheaper than for 23ultra and i already destroy one because of dust and second in almost perfect but still some dust on the edges. I like Samsung protector as feeling with finger is almost like original gorilla glass. And it is not easy peel off on the screen edges... But i can't find anyone who already try it.

Ok I have used AmFilm for years. No issues with it sticking and fingerprint sensor worked. This year with the s23 ultra they are using different glue that doesn't stick well. Screen starts coming off for me after less than 24rs. Good product in the past terrible product now. Unless they update the glue there product this year is garbage.
On a good note I just installed the IMBZBK. Sensor working great and glue seems to be stronger. Still too early to tell but will give you guys an update after a week or so.
https://amzn.to/3kus3uW

I installed the Samsung one. It's plastic not glass. It's fine. Hardly notice it.
I had previously installed a glass one, but I prefer the Samsung one.

ekerbuddyeker said:
I installed the Samsung one. It's plastic not glass. It's fine. Hardly notice it.
I had previously installed a glass one, but I prefer the Samsung one.
Click to expand...
Click to collapse
Problem with film protector is that it is not very smooth hence hindering playing game which require quick and precise swiping (rhythm game)

Mrxyzl said:
Problem with film protector is that it is not very smooth hence hindering playing game which require quick and precise swiping (rhythm game)
Click to expand...
Click to collapse
Actually so far the Samsung one feels great.

My Ringke lasted exactly one week before delaminating. I will install the spare but then probably move to something else.

Related

Are they any good screen protectors out there?

I've been reading all the threads in the forum after I brought my OP 5 yesterday (supposed to arrive to me in the next 2 weeks) and I cant find any solid recommendation.
There aren't any brands making screen protectors to our devices and even less reviews.
-I saw people saying to stay away from the original screen protector made by Oneplus due to the few millimeter lost cause by it.
-I looked on the Orzly screen protector and it looked quiet well but after searching the web I saw multitude negative reviews due lack of adhesiv, dot metrix and rainbows showing up on the screen. but some other who claims the protector is completely fine
In conclusion: In the Glass screen protectors section, there is no good product that will be fine with guarantee ?
If so, there is any other kind of screen protector (not glass one's) such as Skinomi or IQ Shield that are recommended?
I have to order any kind of screen protector as soon as possible before my device will arrive.
thanks for your professional support !
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Goronok said:
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Click to expand...
Click to collapse
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
GTI86 said:
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
Click to expand...
Click to collapse
Still the best, even covered in 2" of lint lol
As much as the screen protectors suck, the Orzly is stil the best of the bunch. I have it installed with no rainbow effect in the middle. Again, I think this is a case of people who have the issues are the ones you see. It depends on how you install it I guess. I know a few others who have also installed it without the rainbow, but I know people who have installed it and have had the rainbow. At least it is a fully screen protector, that doesnt cut off a millimeter of the screen basically, and at least they aren't a company that blames the user for obvious issues with their TGSP *cough* Oneplus *cough*
Take it from someone who has been through 5+ different screen protectors... About the only one that was semi worth a damn was Orzly. You run into ones that don't fill the entire screen and leave the edges exposed, don't stick, cover the front camera or ones that just flat out don't end up sticking. I wish I didn't end up taking off the one that the OP5 came shipped with but oh well lesson learned. As I said as of right now the only semi decent one is Orzly but even that one I had issues with the glue towards the edges peeling so the screen wouldn't respond because the protector was coming off the screen a little. Still though - Orzly or Manufacturer screen that was originally on the one are your best options at this point.
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
xeonyxorich said:
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
Click to expand...
Click to collapse
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
liadatz said:
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
Click to expand...
Click to collapse
I'm using the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
xeonyxorich said:
I'm use the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
Click to expand...
Click to collapse
Using the clear IQ protector here too. So far it's the best I've found. I've used the official TGSP, Orzly TGSP, and a couple other cheaper TGSPs. The wet application film screen protectors are the way to go for this phone it seems. Helps a lot with finger prints and I haven't had any issues with it not being slick enough.
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Damn those curves.. Let's hope that maybe in a few weeks we will finally get a proper screen protector.
cdig said:
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Click to expand...
Click to collapse
I went and removed the factory installed protector, it was a bad idea. Now I have small hairline scratches on the bottom right corner. I've now ordered a tempered glass in Amazon to hide the scratches.
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl ?????? Just to see if the hype is real...
Unless someone already has photos of it....
MrWilsonxD said:
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl Just to see if the hype is real...
Unless someone already has photos of it....
Click to expand...
Click to collapse
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
No idea whatsoever, my stock screen protector from oneplus is still in fantastic shape, so I don't imagine ordering four a couple more months at least.
The ones for the oneplus 3 are 13 dollars on amazon, and ship with prime in the US.. So I imagine in a few weeks the price will become more better.
I've recently seen this on the taobao site. GOR branded TSP. I've used their flat ones on other phones and am quite satisfied with the performance. They have 2 versions, one with the black border, one with a edge sealant sort of thing. I'm planning to get the sealant version next month since my option to add items for cheap shipping is exhausted for July....
If anyone's in China or has bought one, some feedback would be appreciated.
https://m.intl.taobao.com/detail/detail.html?id=554613982294
Sent from my ONEPLUS A5000 using Tapatalk
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
failure_2_win said:
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
Click to expand...
Click to collapse
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Dinjesk said:
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Click to expand...
Click to collapse
Its says in the description, "Not edge to edge protection. (NOT FULL COVERAGE)" so there is no false advertising

Screen Protector

What screen protector are you going for?
Lots of unknown and untested brands out there. I'm looking for thet tempered glass protection out there that doesn't break the bank.
No Idea, let's see how good the preapplied Protector is. On my prior P9 Lite it lasted 5 Month before i saw some little Scratches.
Psierra117 said:
No Idea, let's see how good the preapplied Protector is. On my prior P9 Lite it lasted 5 Month before i saw some little Scratches.
Click to expand...
Click to collapse
True, now you mention it the pre-applied screen protector is a brilliant thing to have. It saves us all those early super dread moments while we get accustomed to a larger, slipper and more fragile device ( I come from an all metal, smaller yer sturdier HTC 10). But, as you say it's only a short fix, I'd like to have replacement at the ready for when the scratches do evidently appear.
I think use the preapplied as long as it works. In 5-6 Months the Market will be flooded with good working Screen Protectors, Cases etc.
Deano1889 said:
What screen protector are you going for?
Lots of unknown and untested brands out there. I'm looking for thet tempered glass protection out there that doesn't break the bank.
Click to expand...
Click to collapse
I'm currently looking at this https://www.ultimateshield.co.uk/collections/huawei-p20-pro
I have used ultimate shield before and they've worked well. It's out of stock now. The page is mostly a placeholder until the phone is released. So hopefully it'll be available soon.
Mobile fun have official accessories listed https://www.mobilefun.co.uk/huawei/p20-pro
Anybody have news if rhinoshield is gonna release for the P20 pro?
I purchased this screen protector here in the UK as I didn't want a mis-alignment of the tinted ones to affect the front camera or sensors: https://www.amazon.co.uk/gp/product/B07BLQHY5X
It is really good. I did use the glue that comes with it to bond the glass together to the screen to fill in the air gaps, does a great job. It is very light as I accidentally touched some of it and put some on the screen that I simply wiped off. i.e. not like super glue!
Also there are 2 of each item inside just incase or for future.
twe69 said:
I purchased this screen protector here in the UK as I didn't want a mis-alignment of the tinted ones to affect the front camera or sensors: https://www.amazon.co.uk/gp/product/B07BLQHY5X
It is really good. I did use the glue that comes with it to bond the glass together to the screen to fill in the air gaps, does a great job. It is very light as I accidentally touched some of it and put some on the screen that I simply wiped off. i.e. not like super glue!
Also there are 2 of each item inside just incase or for future.
Click to expand...
Click to collapse
How is it holding up I heard that glue comes off
dryspuri said:
How is it holding up I heard that glue comes off
Click to expand...
Click to collapse
Initially when I applied it there were slight air gaps all the way round, but much better than no glue of about half a centimetre gap. However overnight all air gaps disappeared and it's perfectly flat right now. No issues so far, really loving it. Obviously lets see in a months time how it goes.
When this comes into stock:
https://www.amazingat.com/products/amazingthing-huawei-p20-pro-03mm-fully-covered-supremeglass
Alternatively contact them to enquire on availability.
6 months on and I'm yet to find a screen protector that I'm entirely happy with.
I've tried these via Amazon:
G-Color Huawei P20 Pro Screen Protector, [Updated Version] 9H Hardness Tempered Glass
OMOTON Huawei P20 Pro Screen Protector - Full Coverage Tempered Glass Screen Protector - [
Ibywind 2PCS Pack Huawei P20 Pro Screen Protector,**Bubble Free Installation Applicator:
G-Color is the best of the bad bunch as it's full adhesive. The issue I have is that it seems to scratch more easily than others and the black surround is slightly wider than that on the device so when viewing white pages you notice that some of the screens is slightly hidden under the edge of the screen protector.
Anyone got any other recommendations?
I use nillkin tempered glass 0.2mm. With my UAG plasma, Ringke Fusion X and Spigen rugged armor case.
Pros: No airlifts, No fingerprint smudges
Cons: Easily chips on the sides.
Already on my 2nd nillkin tempered glass.
hth.
Just bought this two from Aliexpress. The front one is HydroGel screen protector. It is very soft plastic but covers the entire screen. They said the plastic self-healing. True enough, the surface feels like the back of my old LG G Flex 2 (which also have the self-healing coating). I try to make few scratches and they slowly disappeared. As you can see in the first attachment, it is almost invisible and covered all the corners and curves.
For the back, it is transparent 3D carbon fiber vinyl. Really pleased how it turns out.
spiderx_mm said:
Just bought this two from Aliexpress. The front one is HydroGel screen protector. It is very soft plastic but covers the entire screen. They said the plastic self-healing. True enough, the surface feels like the back of my old LG G Flex 2 (which also have the self-healing coating). I try to make few scratches and they slowly disappeared. As you can see in the first attachment, it is almost invisible and covered all the corners and curves.
For the back, it is transparent 3D carbon fiber vinyl. Really pleased how it turns out.
Click to expand...
Click to collapse
For front screen protector - which one? Link please, as they are many on Aliexpress...
Thanks in advance, Mat
bratusm said:
For front screen protector - which one? Link please, as they are many on Aliexpress...
Thanks in advance, Mat
Click to expand...
Click to collapse
This is the one I ordered. But on aliexpress, all the Hydrogel are more or less the same. nothing much different.
Click Here
spiderx_mm said:
This is the one I ordered. But on aliexpress, all the Hydrogel are more or less the same. nothing much different.
Click Here
Click to expand...
Click to collapse
How is your hydrogel-film holding up?
I'm looking in to buying some for myself.
spiderx_mm said:
This is the one I ordered. But on aliexpress, all the Hydrogel are more or less the same. nothing much different.
Click Here
Click to expand...
Click to collapse
just purchased one of these too. getting absolutely sick of trying screen protectors which affect the touch sensitivity of the p20 pro.
Troubled42 said:
just purchased one of these too. getting absolutely sick of trying screen protectors which affect the touch sensitivity of the p20 pro.
Click to expand...
Click to collapse
Applied correctly despite instructions being really unclear and still ended up with plenty of air bubbles trapped.
I guess I'll never find a screen protector for this phone lol
so, for a guy that just bought the phone, i have a q for ppl having the device longer..
how long did the pre applied screen protector lasted for you?
it is pretty good as i can see it for this few days of using the phone...
do i need to start searching for replacement immediately or i have still time? how long?
Dado111 said:
so, for a guy that just bought the phone, i have a q for ppl having the device longer..
how long did the pre applied screen protector lasted for you?
it is pretty good as i can see it for this few days of using the phone...
do i need to start searching for replacement immediately or i have still time? how long?
Click to expand...
Click to collapse
I have the phone for about 10 months and I still have the pre applied screen protector. It began to deattach after I dropped it few times on the floor, otherwise it would have lasted forever, I suppose

Question What screen protector and back cover shall I get for my S22?

As the Samsung screen protectors are just plastic ones, I need a real protector and back cover!
Check Amazon. There is a lot to choose from. If you stick to a known brand you should be OK. I had my case and glass screen protector before I received my phone. I got a clear plastic case so I can see the color of my green phone. I have been using similar cases for years without any issues. This is the first time in a long time I got to use a tempered glass screen protector. My last few phones had curved screens and the glass really didn't fit properly.
Maskman_101 said:
As the Samsung screen protectors are just plastic ones, I need a real protector and back cover!
Click to expand...
Click to collapse
I'd recommend you a film screen guard from Gadgetshieldz which is not plastic, it is made from nano polymer as I saw on their website. This protector can self-heal so you can get this instead of the plastic ones.
I got the amfilm 2 pack OneTouch tempered glass screen protector. Turned on increased sensitivity, re-registered my fingerprints and it seems fine.
When applying it, press from the bottom where the fp sensor is, it might help.
I went with amFilm HD Clear Hybrid Screen Protector. Its a 2 pack and also comes with 2 camera protectors as well. I didnt use them, but the screen protector looks flawless.
I read too many issues with glass protectors, so while I ordered one, it will stay put away for now.
clairelara said:
I'd recommend you a film screen protector from Gadgetshieldz which is not plastic, it is made from nano polymer as I saw on their website. This protector can self-heal so you can get this instead of the plastic ones.
Click to expand...
Click to collapse
I'll check out this screen protector, it self-heals scratches that is great, and is it actually works fine?
SirSeanM10Pro said:
I got the amfilm 2 pack OneTouch tempered glass screen protector. Turned on increased sensitivity, re-registered my fingerprints and it seems fine.
When applying it, press from the bottom where the fp sensor is, it might help.
Click to expand...
Click to collapse
I'll check it out, tempered glass should be good not the one that breaks soon. Is the glass doesn't break for a long time?
unomedmen1 said:
I went with amFilm HD Clear Hybrid Screen Protector. Its a 2 pack and also comes with 2 camera protectors as well. I didnt use them, but the screen protector looks flawless.
I read too many issues with glass protectors, so while I ordered one, it will stay put away for now.
Click to expand...
Click to collapse
Yes, I too saw issues with tempered glass and I hate when it breaks soon! I'll check out the film protector!
Maskman_101 said:
I'll check out this screen protector, it self-heals scratches that is great, and is it actually works fine?
Click to expand...
Click to collapse
Yeah the self heal works awesome and I saw the scratches disappear within a few minutes...
clairelara said:
Yeah the self heal works awesome and I saw the scratches disappear within a few minutes...
Click to expand...
Click to collapse
Thanks for the info, I've ordered one for my S22 Plus and I think it'll get delivered after I get the phone!
I'm going to try the Samsung screen protector (it's cheap and on offer!).
My S20 came with a screen protector already installed, and I discovered, by an accidental drop onto a brick corner, that it does a decent self-healing job. The brick gouged right in the middle of the screen, making a rough raised welt. I thought I'd have to replace it, but after a day it had flattened out, closed up, and become much less noticeable. It's still visible, but it's smooth and looks more like a small chip than a deep gouge.
dlorde said:
I'm going to try the Samsung screen protector (it's cheap and on offer!).
My S20 came with a screen protector already installed, and I discovered, by an accidental drop onto a brick corner, that it does a decent self-healing job. The brick gouged right in the middle of the screen, making a rough raised welt. I thought I'd have to replace it, but after a day it had flattened out, closed up, and become much less noticeable. It's still visible, but it's smooth and looks more like a small chip than a deep gouge.
Click to expand...
Click to collapse
But the Samsung screen protectors are plastic and it scratches a lot and blurs the display in less than 6 months!!!
Maskman_101 said:
But the Samsung screen protectors are plastic and it scratches a lot and blurs the display in less than 6 months!!!
Click to expand...
Click to collapse
The one on my S20 has lasted pretty well for 2 years, so that's not a problem for my usage. I don't want a glass one that can shatter or crack when damaged.
dlorde said:
The one on my S20 has lasted pretty well for 2 years, so that's not a problem for my usage. I don't want a glass one that can shatter or crack when damaged.
Click to expand...
Click to collapse
Yes, the glass protector shatters and it is frustrating! and my usage is high so I'll get so many scratches. As clairlara said in the discussion I ordered this Gadgetshieldz film screen protector and it can really self-heal the scratches that occur on it as she said and I like this instead of a plastic protector! check it out,
Samsung Galaxy S22 Plus Screen Protectors, Scratch Guards, Screen Guards | Gadgetshieldz®
Best Samsung Galaxy S22 Plus screen protectors, back protector, scratch guards by Gadgetshieldz. The Most amazing Full Body Scratch Protection for Galaxy S22 Plus you will ever see. Ships Worldwide. Buy Online.
www.gadgetshieldz.com

Question Is is still the General Consensus that the official Samsung Screen protector is still the only way to fly in regards to Fingerprint sensor?

Howdy folks. I tried the whitedome on the s20ultra. it was thick with all the glue. the fingerprinter sensor sucked with it on. and it wasnt even durable..
Is the official samsung screenprotector the way to go or?
That general consensus is true, to the best of my understanding and experience.
Nope I've used whitestone dome since the s20. It's never failed me. I rarely get fingerprint rejections. I also had the s21 and s22 ultra.. No issues with it whatsoever.
You might have applied it improperly.
Agree with the above. Used Whitestone with Note 10+ and S21U and satisfied with fingerprint response.
Very durable and best coverage while S Pen rides it nicely.
It helps to register the same fingerprint twice under different entries.
I use cheap Chinese uv glue screen protectors without fingerprint because it is a tradeoff but I'd prefer glass protector over plastic ones.
deathshead said:
Howdy folks. I tried the whitedome on the s20ultra. it was thick with all the glue. the fingerprinter sensor sucked with it on. and it wasnt even durable..
Is the official samsung screenprotector the way to go or?
Click to expand...
Click to collapse
Any screen protector that is not glass should work well
I use SBS foil from mediamarket and fingerprint sensor work without issue.
I got a Ringke Dual Easy Wing and no issue with touch it with the fingerprint sensor. Quite snappy actually.
I had a miserable experience trying to install the Samsung one. Wish they factory installed it.
ekerbuddyeker said:
I had a miserable experience trying to install the Samsung one. Wish they factory installed it.
Click to expand...
Click to collapse
Really? Is it that hard?
Pretty confused whether to get one and try myself ..
I generally use the non-glass matte protectors on my phones and they tend to work fine. Whenever I hand my 10 year old my phone when I upgrade every 6 months I put on the whitestone glass ones and they seem to work just fine with the fingerprint. Generally don't notice any issues at all.
Got a simple hydrogel protector from my x70 Pro+ which KINDA fits and there are no issues here. Waiting for proper protectors from Aliexpress - I sure as hell wont spend 20€ for a piece of thin plastic.
deathshead said:
Howdy folks. I tried the whitedome on the s20ultra. it was thick with all the glue. the fingerprinter sensor sucked with it on. and it wasnt even durable..
Is the official samsung screenprotector the way to go or?
Click to expand...
Click to collapse
I bought a cheap £1.69 film screen protector on eBay and my fingerprint sensor works every bit as well now as I'd did with no protector fitted. Don't waste your money on Samsung's expensive film
My own personal experience is cheap tempered glass screen protectors don't work well if at all on ultrasonic fingerprint sensors as used in the S range over the years but do work fine on optical sensors used in the A range. Just my $0.10 view

Question UV glass screen protectors and am I best taking Samsung's screen protector off?

Hi, I am getting the S23 ultra soon and was wondering, am I best leaving Samsung's film screen protector on, or will this not really offer much protection?
Am I best taking this off and putting my own?
I was looking at these UV glass ones, which I don't really have experience with, they are all a little on the dear side in comparison to the glass ones that are ready to stick.
I tend to prefer glass as it feels like more protection and touch / fingerprint still works fine and also tends not to suffer air bubbles as much.
Regards
James
You dont get a screen protector on it when it arrives
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
s3fan said:
You dont get a screen protector on it when it arrives
Click to expand...
Click to collapse
That's a bummer, they have as far as I know, at least on the flagships since the S10
Sprov said:
After years of using the UV product you mentioned (whitestone dome) I settled on the practical plastic films. These are very cheap, you can get 2 or 3 at just $10, they avoid scratching mainly and the feel is not as good BUT cleaning up the screen after removing the protective UV glass is a nightmare, replacements cost $40 to $60 in case it breaks or dents. The plastic film doesn't really dent and it's much thinner and as far as my experience goes most cases are compatible with the plastic one, in contrast with the UV glass. Furthermore, the installation of the glass is not "for everyone", I am used to do precision work with my hands and the installation process is not something I would recommend to an inexperienced person: some glue is going to get outside while curing the screen with the UV lamp and it can infiltrate in your mic holes or in the small gap between the display and the frame. Last but not least, if you want to use the phone without a case with the glass you get a noticeable step on all 4 sides which is very uncomfortable especially if you use gestures. If you want to give it a try, is something you can live with and it has for sure benefits as far as feeling and protection. On the other hand, all the above issues remain. Sorry for the bad grammar and punctuation, I'm in a hurry. I hope my comment helps you decide for the best!
Click to expand...
Click to collapse
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Getting on my high horse here to ***** about the hypocrisy around "saving the planet" by not providing a screen protector....it's all virtues signaling and real cheap ass practice.
Look what resulted from buying a screen protector from Scamazon (add gas burned, electricity, etc ) to see the "savings"
dl12345 said:
I swear by these whitestone dome protectors. The newest versions (I have one on my S23U) come with stickers to seal the buttons and edges when you install so you don't get any glue in the buttons.
If one watches the video, the installation process is relatively fool proof. I've not yet had a bad installation and the glass has saved my phone more than once.
Fingerprint sensor sensitivity is reduced somewhat but still functions perfectly.
IMHO, these are far and away the best protectors and I'd not use any other.
Click to expand...
Click to collapse
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
robbo1947 said:
That's a bummer, they have as far as I know, at least on the flagships since the S10
Click to expand...
Click to collapse
yeah it looks like they stopped including them with S22 Ultra. My S21U came with a screen protector and the S22U didn't. I'm from EU if it matters.
Sprov said:
I completely agree that as far as protection Whitestone Dome is the best you can get - but that was not in question.
I also agree that the procedure is pretty straightforward but you would be amazed knowing how MOST people can screw up easy things. Not everyone has decent manuality: people actually pay to get cheap screen protectors installed by some "specialized tecnician". I am someone who fixes its stuff to the point of soldering components, just for curiosity and because I enjoy it, but most people don't want to deal even with screen protectors
Click to expand...
Click to collapse
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
kevindd992002 said:
I'm also thinking if I want to have the TMax UV Dome installed on my S23 Plus but I'm reading mixed reactions with using UV Dome. I won't install it myself so that's out of the question. But that screen protector also covers the front camera which sucks and I don't know how good/bad it is. I know it's from China but so is Whitedome.
Some experienced users told me to use a TPU film instead, like the ArmorSuit wet install film. The display of the S23 is very good and it just needs a simple TPU screen protector to protect it from unavoidable scratches. Is the difference in feeling between a TPU and tempered glass protector that significant? What else made you suggest using TPU instead of glass?
Click to expand...
Click to collapse
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
who cares? said:
If using the plus, it has a flat screen and UV glass isn't necessarily needed. The UV glass really excels in the curved screen market where most of the glass screens only have glue in the corners or have other issue towards the edges. The liquid glue allowed for better flash adherence to the screen. For the plus I would just get highly rated 9h tempered glass.
Click to expand...
Click to collapse
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Thanks for everyone's replies, after a lot of fear, hassle, and a bit of a loss of money I decided on a film protector which is working 100% fine.
Not sure if I just picked rubbish glass screen protectors, but they caused me big issues. Neither would work with fingerprint reader and because they were hard, my original case was lifting the sides of the protector a bit, meaning touch was less sensitive.
The first glass protector I tried was UV and when it came to taking this off, that was a little scary with this brand-new phone!
Trying to peel it back off was a hard job, was very stuck and was actually cracking as I was slowly lifting it off.
So now I have a different case that doesn't affect the protector and a film protector and all seems good now
kevindd992002 said:
I see. But how about the problem with the fingerprint sensor? I see a lot of people having issues when using a tempered glass protector with their Samsung fingerprint sensors. And that's why most of them say that a TPU film is enough.
Click to expand...
Click to collapse
Very little issues. Honestly it's works as well as the tpu film did I had on my s21 ultra. I wanted glass over the film on the ultra because of the pen. I wasn't sure how the pen tip would work with indenting the tpu film. I like the feel of the glass a lot better.
Before my S23U arrived I already had the case and glass ready. Didn't even power it on first, but went right away and applied this UV glass.
No issues with case causing glass come off. Glass needs to be perfectly aligned.
I did the same with my N9 that I traded in - not a scratch anywhere, although I dropped it few times and the UV glass saved it And I had N9 for full 4 years..
No issues when I took the glass off before shipping N9 back to Samsung.

After using these on my S21 Ultra, I purchased the same for my S23 Ultra and installed it today. Took about 15 minutes and extremely happy with the results. Feels like the original glass and most times don't even notice it's on. Additionally, customer support is top notch. Any issues and they send out replacements without issue. They're also available for installation support if needed.
The key is to watch the installation video and read the instructions multiple times and clean clean clean the phone.
https://www.amazon.com/dp/B0BMDLDPY6?psc=1&ref=ppx_yo2ov_dt_b_product_details
I live in Asia and use Zeelot glass screen uv protector. Fingerprints work well and didn't have issue with my case
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
_GRIZZLY_ said:
I used DomeGlass from Note9 (was little thick)>N20U and S22U and overall was good and happy but usually after few months under glass I saw "spider web" from glue on the edges.
Now in my S23U use Polish product like 3mk film and I am positive surprised good quality- thin, good sticks on the edges and low dirt from fingers similar, smooth spen use.
In this year don't miss to domeglass.
Nevertheless dome glass is good product but very expensive, installation with YT step by step is even easy
Click to expand...
Click to collapse
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
aureum said:
I'm thinking of original samsung screen protector, however there are very bad reviews from one that it is not easy to put it on, but ppl who manage to do it are very happy, no peel of on screen edge and good feeling with finger. What exactly 3mk model of film You use? Hammer maybe?
Click to expand...
Click to collapse
Yes, I think too about original samsung screen protector but I will buy it after receive points (about few days) thanks to buy phone in official site. Change my 3mk if I see issues but after 1 week (I know it's small period time) all is fine with case spigen tough armor.
However I don't sure that later, will not unstick because is full dimension from corner to corner with my case.
Easy wet application like similar film protectors.
Mine is 3mk Silver protection:
Folia na ekran Samsung Galaxy S23 Ultra - 3mk SilverProtection+
Antyuderzeniowa folia ochronna, wzmacnia ekran do 400%, powłoka samoregenerująca, łatwy montaż. Zabezpiecz Samsung Galaxy S23 Ultra. Oficjalny sklep producenta
sklep.3mk.pl
This is local product of my country - Poland
i use domeglass and spigen ultra hyprid clear case, because of Red Color from phone.
Its fit perfect together.

Categories

Resources