{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps to Install Pixel Experience Plus GSI Android 13 on Samsung Galaxy S20 SCG01 Japan
Note: I am not the Developer I am sharing…
-Almost everything,
Fingerprint Working
Face unlock not Working only on A13
Phh setting Qualcomm Enable (use alternative audio policy ) unleash the power of snapdragon Audio Clarity for Music Lover
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Links
Odin https://www.odinflash.com/download
TWRP Recovery TWRP 3.7.0_12
Vbmeta_disabled Download
Pixel Experience GSI Download full https://github.com/ponces/treble_build_pe/releases
Magisk Download
Unlock the bootloader
1. Go to your phone's settings
2. Scroll down and click on the "About phone" section
3. Click on "Software information"
4. Tap on the build number several times until you see a message saying "Developer mode has been turned on"
5. Go back to the settings homepage
6. Scroll down to the very bottom and select the "Developer options" section
7. Enable the "OEM unlocking" option
8. Scroll down and enable the "USB Debugging" Option
9. Connect your phone to your computer with a USB cable
10. Turn off your phone
12. Connect Use to only in PC press volume up + volume down at the same hold same time now connect C port to Phone
13. When you see the blue "Warning" screen, long press the volume up button to unlock bootloader
14. After the reset, start a new device setup and connect only to the internet skip all.
15.Enable Developer option if you can see Bootloader unlock tick Now good to go.
Install TWRP Custom Recovery
16. Open Odin
17. Uncheck auto reboot in Odin and flash TWRP in AP slot and vbmeta_disabled.tar in USERDATA Start Flash. (If failed you are not connected internet after Unlocked Bootloader so Follow up 14)
18.Hold volume down and power until the screen goes black then immediately switch to holding volume up and power to reboot into TWRP.
19.Go to Advanced > Terminal, type: multidisabler. (You will see " - Finished." When it is done.)
20.Go to wipe, format data, and type "yes" to confirm.
21.go Back Select "Dalvik / ART Cache" "Data" and "Cache”.
21. Reboot to TWRP
Install Pixel Experience GSI
22. Extract Pixel Experience file now you can see IMG file change name to system.img
23. Copy the system.img and Magisk files to internal storage.
24. TWRP Click Install and down below you can see INSTALL IMAGE choose system.img path is System.
25. Flash Magisk and reboot.
79. Set-up your new ROM !!
ENJOY !!!
To fix safty net (very important) no ned to flash any file.
1. flash magisk after reboot update the magisk and hide magisk manage reboot.
2. Now enable zysik in magisk setting choose play store and play services clear data for both reboot bhammmmm your safetynet is fixed.
SCREEN SHOT
To avoid any confusion between this and full ROMs that include kernels, I have changed the title of your post to appropriately reflect that this is a GSI.
Thanks.
Does this work on g986n
Does this work on g986n
DesrtSailor said:
Does this work on g986n
Click to expand...
Click to collapse
You can try it's an GSI ROM. use this recovery for your Model
https://androidfilehost.com/?w=files&flid=316866
Great one bro. Will VOLTE & all the functions in camera works?
There are 3 versions of gsi available. Normal, lite, vndklite. Which one we need to flash?
Pixel Experience GSI download requires authorization
please post the kernel version screen shot.
psychem said:
please post the kernel version screen shot.
Click to expand...
Click to collapse
bnskdd said:
Pixel Experience GSI download requires authorization
Click to expand...
Click to collapse
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
pratheepdx said:
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
Click to expand...
Click to collapse
Successfully swiped in, thank you for your contribution
High refresh rate working?
The updater function is not working.
Fingerprint sensor is not detecting finger, keeps saying lift and re touch again.
120 fps working finger print is working with latest firmware SCG01KDU1CVG3. try to flash latest stock firmware which is mentioned above and try again.
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix it..
Olink007 said:
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix
Click to expand...
Click to collapse
Do you have tempered glass for your screen or something else? its happens to me as well even with Stock Firmware once removed the issue was resolved for me I've verified that the Pixel GSI Android 13 Fingerprint works without any issue and Android 12 GSI Face Unlock and fingerprint both function flawlessly.
Does this work on s20 ultra snapdragon G9880 ?
Does it support Adaptive brightness? cause I can't find it in the settings.
paazoka said:
Does this work on s20 ultra snapdragon G9880 ?
Click to expand...
Click to collapse
If your bootloader unlockable of course this GSI will work. Try at your own risk.
Related
Team Win Recovery Project 3.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
Download: greatlte (Exynos variants - N950F/FD/X/N)
https://drive.google.com/file/d/0B7EuVd0yZ8ErSE5EQW12TVEtcVk/view?usp=sharing
Sources:
https://github.com/TeamWin
https://github.com/geiti94/android_device_samsung_greatlte
https://github.com/geiti94/android_kernel_samsung_universal8895_greatlte
Changelog:
Check #2.
Guide:
Check #3.
Bugs:
-A mouse pointer shows on display
XDA:DevDB Information
[RECOVERY]TWRP for Galaxy Note 8 (Exynos), Kernel for the Samsung Galaxy Note 8
Contributors
geiti94, @jesec for the S8+ TWRP tree i used as base
Kernel Special Features:
Version Information
Status: Beta
Created 2017-09-16
Last Updated 2017-09-21
Changelog:
Sep.21
Removed Mouse cursor. thx alot to @Tkkg1994 that joined now us too on n8
Added F2FS Support
Sep.17
Fixed MTP
Fixed ADB
Sep. 16:
Initial Release
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.) (for the moment not working)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/". (for the moment not working)
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Omg I'm gonna die happy lol. Let me go and root now.
Sent from my SM-N950N using XDA-Developers Legacy app
Good work keep it up
This is great. Many thanks
Great job and many thanks for your efforts!
Do I get this right?
When I'm in download mode, I have to hold the 3 buttons again and press start in odin ?
Doesn't that interrupt the flash process ?
Pinu'u said:
Do I get this right?
When I'm in download mode, I have to hold the 3 buttons again and press start in odin ?
Doesn't that interrupt the flash process ?
Click to expand...
Click to collapse
No go To Download Mode in The smartphone and Then .via Odin Select AP and The Recovery IMG Then Flash ans Phone Reboot automaticly
Oh yeah baby
Thanks time to de bloats and install my favorite apps
Sent from my SM-N950N using XDA-Developers Legacy app
Thanks a lot TWRP up and rocking. Great work !!
Edit : Can confirm that SuperSU v2.82 is working also !!
Anybody know if this will also work with N950F/DS model? Thanks.
xpdragon said:
Anybody know if this will also work with N950F/DS model? Thanks.
Click to expand...
Click to collapse
Works since i have it byself is the dual sim one right? when yes is same modell as mine
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion. ??
Sent from my SM-N950F using Tapatalk
geiti94 said:
Works since i have it byself is the dual sim one right? when yes is same modell as mine
Click to expand...
Click to collapse
Yes, it is dual sim model. Thanks for the reply.
your fantastic!!! one day without root and twrp!! im so happy now ^^. now i can continue with modding on my new great phone.
Finish work and lets go home flashing
Was just about to port it by myself and then I saw Your thread . Great Job Geiti! Guess I will take care of building AOSP for N950F then .
pswin09 said:
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
There's no guarantee a software update will ever unlock your bootloader if the OEM Unlock option is not available for you. I would suggest selling it and buying a new one that does have the option. If you really want to root or install custom ROMs, why take the risk when you spent $1000 on this phone for a specific purpose?
If you just bought your phone, it must still be brand new and in pristine condition. You should sell it for almost full price. The demand is really high right now so you'll have no problems selling it fast.
pswin09 said:
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
can be your carrier blocked the oem unlock. download a debranded firmware like the one with AUT or DBT csc and flash it with odin and look if you have then the menu. But flash it only when you have a N950F or a N950F/DS
Has anyone tested Android Pay after doing this?
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Before you start it's important to make a backup of your data you don't wanna lose.
I only have experience with installing phh-treble with TWRP, so this manual will be for TWRP.
Downloads:
First you have to download the image of PHH Treble (arm64) (Check this post)
After download just unzip the file.
(To know which version you need you can use the app Treble Check, if both of these blocks are green you need the A/B image else you nee the only A image.
The Mi8 is an only A image, but if you wanna know for sure you can use the app. )
In the PHH Treble rom there are no Google Apps (Gapps), so if you want the play store and such other apps of google you have to download OpenGapps Unofficial
After download just keep the file as zip.
The overlay patch for fixing the notch you can find it in this post
It's important to be on the latest MIUI version, doesnt depend on Miui V9 or Miui V10, both will work.
Installing:
Step 1:
Be sure you got a backup of your data.
Step 2:
Reboot your phone in recovery.
Step 3:
Do a factory reset with TWRP. (Go to wipe and just swipe for a Factory Reset).
Step 4:
Transfer the system-arm64-aonly-vanilla-nosu.img, the OpenGapps.zip and the treble-overlay-xiaomi-mi8.apk to your internal storage.
Step 5:
Go to install, tap on Install Image and choose system-arm64-aonly-vanilla-nosu.img
Select the System Image partition to flash the image to and swipe to confirm flash.
Step 6:
If you want root just flash Magisk V16.7 now and reboot, without root only reboot needed.
Step 7:
When your phone is booted successfully just reboot into recovery.
Step 8:
If you want the Gapps, just flash them now.
Go to install, tap on install zip if it's not seeing any zip's yet.
Select the OpenGapps zip and flash it.
(It might happen the Setup Wizard keeps crashing! You can fix this by removing the SetupWizard.apk from /system/priv-app/SetupWizard. Use the file manager of TWRP)
Step 9:
To fix the notch of the Mi8 you have to copy the treble-overlay-xiaomi-mi8.apk to:
- /system/overlay
- /vendor/overlay
Step 10:
Reboot the phone and it is ready to be used!
If you installed Magisk you can install ViperFX 1.7 to fix the crappy sound.
If you still have any questions, just ask!
If I can improve this manual, just let me know
Big credits to:
- phhusson: PHH Treble Rom
- Nezorflame: OpenGapps
This one is for me!
Current bugs found:
- Hotspot (Bluetooth tethering works!)
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
can install face id in rom treble ?
Any bugs? What's about GPS and Wifi?
Ziarrr said:
can install face id in rom treble ?
Click to expand...
Click to collapse
Not working yet
0312Penner said:
Any bugs? What's about GPS and Wifi?
Click to expand...
Click to collapse
GPS and Wifi are perfect!
only bugs are:
- Hotspot
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
Can I go back to MIUI if I don't like it or are there problems with loading backups?
NielsvdS said:
Not working yet
Click to expand...
Click to collapse
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
xdamami said:
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
Click to expand...
Click to collapse
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
It is possbile! Maybe I will also create a guide for going back from a treble rom to MIUI.
First time when I tried the PHH-Treble rom the Wifi and Camera didn't work so I went back to MIUI.
For now I'm really satisfied!
I've tried LOS and PHH 8.1 but my gps doesnt want to work on either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finger print sensor is working fine and wifi. I've just had a problem with the playstore on LOS but that might just be the version of GApps they install as default
EDIT.
I've fixed GPS now as far as i can tell. After turning gps off and on a few times and a couple of other things its now working
How is the camera at the moment compared to MIUI?
_katho_ said:
How is the camera at the moment compared to MIUI?
Click to expand...
Click to collapse
It is crappy, WhatsApp is creating to much brightness, but the OpenCamera works well, pictures are ok, but far from the stock camera
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
PolariSz said:
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
Click to expand...
Click to collapse
Yeah! So nice.
I will take some time to create an custom rom for the Mi8 based on AOSP 9.0
NielsvdS said:
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
Click to expand...
Click to collapse
Ha Just one day))) there is a kernel source available)). What is your stage for kernel komple? will be good with Nethunter
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
moe.ze.chief said:
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
Click to expand...
Click to collapse
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
NielsvdS said:
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
Click to expand...
Click to collapse
Thanks!
Do you have a Link for the magisk module?
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
Just flash e.g. an xiaomi.eu Rom. There is a full installer and its no problem to go back to miui.
Factory reset and flash in TWRP
After so many days of testing and more testing, and scared of losing IMEI, I was finally able to find a custom rom for my J6+ (J610G). (Not yet tested in other variants of J6+)
This custom, and the Resurrection Remix (RR) GSI based on Android 8.1.0 (Oreo). (Link to the original thread for more information)
Requirements:
Bootloader Unlocked (Option "OEM Unlock" checked in "Developer Options").
TWRP Recovery installed.
Memory Card with 1.5GB of space.
Very attention.
STEP BY STEP BELOW:
(WARNING: YOU WILL LOSE ALL YOUR HOME MEMORY DATA AND DO NOT RESPONSIBLE FOR DAMAGES CAUSED TO YOUR SMARTPHONE, DO AT YOUR OWN RISK!)
1. Download the rom, "system-181221-arm-aonly-gapps.img" from this link, and move the file to the memory card.
(THE NEXT STEP WILL DELETE ALL YOUR DATA)
2. Restart TWRP, tap: Wipe >> Format Data >> type "yes" and swipe!
3. Go back to the home screen, tap: Install >> Select storage >> Check "Micro SD Card >> (Go to the folder where you moved the downloaded system.img).
4. When you find the folder, tap: Install Image (All files with extension ".img" will appear) >> Tap the image you downloaded previously >> Check the "System image" and give "Swipe".
5. After installation, return to the initial screen and go to: Wipe >> Advanced Wipe >> Check "System" and touch "Repair or Change File System".
6. Touch "Repair File System" and "Swipe" after the repair, go back and touch "Resize File System" and give "Swipe". (CAUTION: If there are errors while performing this step, repeat it a second time).
7. After performing the previous step, install a root solution of your choice. (I recommend the Magisk 18.1)
8. After installing the root solution, return to the splash screen and tap: Reboot >> Recovery!
9. After the TWRP is started, configure it the way you prefer, and then go to: Reboot >> System.
10. Wait for the startup, after the startup is completed, put your language, do not connect to any wifi network and skip as many steps as you can.
11. When you get to the main ROM screen, if you do not have a navigation bar, see the next step, if you skip right to step 13.
12. Go to Settings >> Personalize >> Slide to "Navigation" >> and check "Allow navigation bar".
13. After all the above steps are followed, activate an Internet connection(Mobile or Wifi).
14. Try for a Google account, if you give a famous error of lack of certificate, do not worry as much as there is to solve! Click on this link and follow the steps.
(WARNING: You will receive numerous notifications from Google Play Services until there is an account added to your smartphone).
15. After 10min. of the above steps are performed, you can add an account and you can take advantage of all Google apps.
Working:
Telephone Calls;
Camera;
Wifi / Bluetooth;
SIMCARD(1) and 3G/4G/LTE;
Access to internal and external memory.
Flashlight;
Battery saving;
Etc.
Bugs:
USB MTP
SIMCARD(2) does not work.
Need help?
Any questions? Suggestion?
Or did you find any way to improve this post?
Leave your answer in the comment below !!
Telegram Group for all J6+ Users:
https://t.me/joinchat/G2bPvhSTIt-CDtYQyljKqA
Thanks to:
@Fersho by solution for post "uncertified devices".
@mracar by the build of RR 8.1.0 rom!
Reserved1
Reserved2
finally I will test thank you
RMM Forever
RMM state for more than 8 days.
Unlocked OEM and now waiting RMM
Tried date trick several times.
Tried MiracleBox, but it doesn't detect my phone in download mode.
Anything else i could try?
TeuzHd said:
RMM state for more than 8 days.
Unlocked OEM and now waiting RMM
Tried date trick several times.
Tried MiracleBox, but it doesn't detect my phone in download mode.
Anything else i could try?
Click to expand...
Click to collapse
Your phone is J6+?
[QUOTE=JulioManeiro
Hello. I have samsung j6 plus. I uploaded different GSI android 9 and do not want to download. usually after starting the system, it returns to TRWP. one rom GSI that got in RR this March. but the problem is with the google play certificate. any suggestions?
where can I find matching GSI 9 for samsung j6 plus J610 FN?
I've got everything from the beginning ... it's back in TWRP. I do not know what to do next. maybe some advice ??
I have j6 plus. j 610FN. Maybe that's why I can not download GSI
JulioManeiro said:
Your phone is J6+?
Click to expand...
Click to collapse
of course
how to put this GSI ??? I always return to TWRP after uploading ..
krystianjolek said:
how to put this GSI ??? I always return to TWRP after uploading ..
Click to expand...
Click to collapse
You have downloaded this img?
You smartphone is arm?
TeuzHd said:
of course
Click to expand...
Click to collapse
You have to format factory you phone.
And wait by 168hours.
And active your develop options.
krystianjolek said:
JulioManeiro
Hello. I have samsung j6 plus. I uploaded different GSI android 9 and do not want to download. usually after starting the system said:
To solve google play certificate, link for this its in post above.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JulioManeiro said:
You have to format factory you phone.
And wait by 168hours.
And active your develop options.
Click to expand...
Click to collapse
Any problem if i activate it before? i mean, i have it activated now and i alredy have 10 days without any formating.
Now i'm trying to keep 7 days uptime, without turning the device off on university and everything
TeuzHd said:
Any problem if i activate it before? i mean, i have it activated now and i alredy have 10 days without any formating.
Now i'm trying to keep 7 days uptime, without turning the device off on university and everything
Click to expand...
Click to collapse
No problem, but you have formated data?
JulioManeiro said:
No problem, but you have formated data?
Click to expand...
Click to collapse
I had OEM unlocked, then it factory reseted and i forgot about RMM, so i logged in,, my rmm got locked.
After that i formated everything and cleared cache, and i'm waiting again now
TeuzHd said:
I had OEM unlocked, then it factory reseted and i forgot about RMM, so i logged in,, my rmm got locked.
After that i formated everything and cleared cache, and i'm waiting again now
Click to expand...
Click to collapse
Well, now all you have to do is wait, and this time do not forget the RMM.
More than 168 hours, no oem unlock button (oem is alredy unlocked, oem lock was off on download mode)
My RMM state is never going to be normal?
169 hours uptime
Current system info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeuzHd said:
More than 168 hours, no oem unlock button (oem is alredy unlocked, oem lock was off on download mode)
My RMM state is never going to be normal?
169 hours uptime
Current system info:
Click to expand...
Click to collapse
Go to download mode, and send photo for your download mode.
TeuzHd said:
Tried MiracleBox, but it doesn't detect my phone in download mode.
Anything else i could try?
Click to expand...
Click to collapse
How do u enter in download mode ?
Do U have black backround in download mode ?
U suppose to enter in download mode when phone is turned off, hold volume + and volume - together then connect usb cable, it will run download mode (with blue/green/mint background). then phone is detected in download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
reboot
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Niiiiice!!! I will try it ?
It Is Android 10?? You have some screenshot??
Does the fingerprint under the display work with this ROM?
Honzule89 said:
It Is Android 10?? You have some screenshot??
Click to expand...
Click to collapse
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Honzule89 said:
Does the fingerprint under the display work with this ROM?
Click to expand...
Click to collapse
Unlocking by fingerprint is implemented for scanners on the back of the phone.
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity. I will not install this ROM. But still great work
Honzule89 said:
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity.
Click to expand...
Click to collapse
This is GSI. This is a basic image of the firmware, not for a concrete model. Are you ready to donate for Moto Oe Zoom specific firmware development?
Honzule89 said:
I will not install this ROM.
Click to expand...
Click to collapse
The choice is yours. No one is forcing anyone. It's just that up until now it hasn't been possible to get a working system on Android 10.
After the flashes I get this:
Failed to mount '/system's (Invalid argument)
After I unpack the image zip, I rename to .img, maybe that's why, help me please...
ilia3367 said:
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Click to expand...
Click to collapse
You're truly incredible, thank-you SOOOOOO much for your work. :laugh:
It's amazing that unofficial development is an entire OS version better than OEM work! :good:
Hi,
nice job....i would donate for development....fix bluetooth?
giar72 said:
....fix bluetooth?
Click to expand...
Click to collapse
I tried to fix it, but I couldn't...
sorry...
Hell yeah, nice work. Probably not going to install it since I rely on Google pay and Bluetooth headphones regularly, but it's nice to finally see some roms for this device.
problem help please
ilia3367 said:
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Click to expand...
Click to collapse
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
forgot to mention
death1426 said:
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
Click to expand...
Click to collapse
i think i accidentally hit boot on slot b on twrp if so how can i fix this if it wont boot into bootloader?
To load into slot A, execute the command:
fastboot --set-active=a
Does it still has the moto shortcuts? Like alsways on display and the flashlight gesture?
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
thirdphotographer said:
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
Click to expand...
Click to collapse
This ROM is not the original GSI Havoc-OS image.
Why? Custom Super.tar
-Flash system GSI is normal process but Flash Custom Super.tar is not.
Our sources: @xyrn23
https://github.com/ponces/treble_build_pe/releases/tag/v2023.03.29-plus
Note:
》Sync with latest sources of TrebleDroid then no problem with setting UI and swipe from bottom screen to show all icons menu.( Can set any value of Smallest width dp.)
》Why FW XXU1CWA2 ?
-it's the last Firmware for T220 & T225 which can downgrade.
= The T220.T227 can't uses my "Custom super.tar"
SM-T225
( XXU1CWA2 )SM-T220
( XXU1CWA2 )odm.img 4349952odm.img 4349952product.img 1238544384product.img 1234505728vendor.img 652824576vendor.img 640036864super.raw 6094323712super.raw 6023020544
-------------------------
☆☆☆ Howto install?
1. Flash Firmware "T225XXU1CWA2" with Odin.> connect internet reboot then enable "OEM unlocking" + "USB debugging" + configure update Magisk.
(update 3in1.tar with Magisk v.26.1)<- Download from Attachment below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Flash "super.tar" at AP Slot. [ PixelExperience_Plus_arm64-ab-vndklite-13.0-20230329]
4.94 GB file on MEGA
mega.nz
☆☆☆- you will get "Pixel Experience Plus 13.0" with R/W Super Partition ( can modify "Product" "System" "Vendor") plus frees up a same amount of free space in /system or different ones =150 MB/each.
☆☆☆-Auto Screen Brightness. is ready to use.
By Enable:
1.Setting>System>Status bar > Enable Brightness slider.
2.Setting>Status bar > Enable Auto Brightness. (Show auto brightness button)
3. Set Developer Options: Smallest width= 723 dp
3. Configure bluetooth devices.
=》Bluetooth devices.(Headphone / True Wireless)
Enable Phh Treble Settings (Misc features)
☆☆☆ Do Enable the same as I show below.☆☆☆
-Use alternate way to detect headsets.
-use System Wide BT HAL
-reboot
4. Task menu came with "Recent apps" -had changed itself from your last selected app.
***Don't set Smallest width = 598 dp , you will lost ability of Multi-tasking Menu.
The Purpose of this type menu is for Multi-tasking windows. ( Split screen apps).
5. Google assistant can call from your contact number. (After update all Google apps .)
6. Sync with latest sources of TrebleDroid then no problem with setting UI and swipe from bottom screen to show all icons menu.( Can set any value of Smallest width dp.)
7. Can setup "always show keyboard"
8. Battery usages does not conflict with Auto screen brightness and specific every duration.
9. Charging when power-off device.
it can cut-off (break) informed warranty bit error state. (below)
10. Test before updating.
Its supported Vega Bobo DSU.
11. Phone Calling sound when we wear earbuds or headphone.
Samsung buds 2 earbuds with no problem through calling sound > Calling sound can came from both tab and inside buds2. Same can uses microphone from buds 2 also. ( Call Google assistant)
12.TV Casting with nightly VLC.
13. MTP USB on Dev Option.
Default USB configuration
-USB
Select File transfer/Android Auto
(U can transfer files with Computer.)
14. How2update without lost historical data.
-Update Pixel Experience Plus 13.0 v2023.04.21 Download
Dirty flash
Code:
adb devices
adb reboot fastboot
fastboot flash system PixelExperience_Plus_arm64-ab-vndklite-13.0-20230421-UNOFFICIAL.img
reboot system.
Dirty Update✓ NEW fastbootD- Recovery_patched For T225XXS3CWC2
Download from Attachment below.
The Competitor you must try.✓The crDroid 9.4 A13 GSI .
✓The LineageOS 20 TD
✓The sparkOS GSI.
✓ The Alpha Droid A13 GSI.
(Unofficial)
Release v20230419 · ChonDoit/treble_alphadroid_patches
| Sync with sources | Fixed Settings Crash
github.com
Extended Features From
"Pixel Experience Plus"Note: Only the bad thing is not yet supported "exFAT sd card", and Google Assistant Bugs.
1. Task menu came with "Recent apps"
2. Auto screen brightness.
3. ADB ROOT Menu from Developer options.
4. Control Google Services GMS & Core.
Smart Charging. ( Set max
Waiting For Next version.
}=================={
All my tutorial. (Link)
CustomAPFastbootDLineage OS TD GSIPixel Experience GSISpark OS GSImicroG with GSITWRP for A11
How2 ? install Lineage OS "TD" with SM-T225.(Samsung Tablet)
Light doesn't have VNDKLite builds.
Click to expand...
Click to collapse
Light doesn't have Old PHH Treble Setting.
Click to expand...
Click to collapse
This light build has never worked for any Samsung tablets since the dev has expressed his disinterest in making it compatible.
Sure, it flashes successfully...but it always does get stuck on the boot screen. There is nothing that can be done at this point
Click to expand...
Click to collapse
Actually I believe offline charging display isn't working at all, and whether it charges while the logo freezes depends on the device.
Click to expand...
Click to collapse
In "Light" I didn't do any special treatment to offline charging, whereas TD-based does have a few related patches.
Click to expand...
Click to collapse
All of this came from XDA.
Begin with "what does variant to use ?"
More...
LOS 20 Treble Droid.
new pop up Task menu.
Is this only for t225 ? How about t220 ? Thanks
I was able to get the Pixel Experience to work on my SM-T220 with a lot of messing around.
First, I followed this to get TWRP on my S7 Tab Lite: https://forum.xda-developers.com/t/...lite-wifi-t220-unofficial-android-13.4576343/
Once I was in TWRP, you need to hook up a wired mouse via the USB-C port, which means you need a USB-C adapter ("OTG mouse"). Then you can use TWRP, since the touch screen doesn't work until you have a non-Samsung OS installed
Once I had TWRP on the system, I always used TWRP to boot into Fastmode, then followed along with this video:
The video isn't the most intuitive, but if you have some awareness on how to load custom OSes on a Samsung device, you should be just fine. Otherwise, follow along and Google the commands he uses in the video to see the expected outcome. Again, whenever he's in fastboot mode on here, I used TWRP to get there instead of ADB.
YES, I also installed the fbe_disabler_gta7lite.zip and gta7litewifi_kernelsu.zip from TWRP, then flashed Pixel Experience
4. I had to use PixelExperience_Plus_arm64-ab-13.0-20230329-UNOFFICIAL to get anything to boot.
fonixmunkee said:
I was able to get the Pixel Experience to work on my SM-T220 with a lot of messing around.
First, I followed this to get TWRP on my S7 Tab Lite: https://forum.xda-developers.com/t/...lite-wifi-t220-unofficial-android-13.4576343/
Once I was in TWRP, you need to hook up a wired mouse via the USB-C port, which means you need a USB-C adapter ("OTG mouse"). Then you can use TWRP, since the touch screen doesn't work until you have a non-Samsung OS installed
Once I had TWRP on the system, I always used TWRP to boot into Fastmode, then followed along with this video:
The video isn't the most intuitive, but if you have some awareness on how to load custom OSes on a Samsung device, you should be just fine. Otherwise, follow along and Google the commands he uses in the video to see the expected outcome. Again, whenever he's in fastboot mode on here, I used TWRP to get there instead of ADB.
YES, I also installed the fbe_disabler_gta7lite.zip and gta7litewifi_kernelsu.zip from TWRP, then flashed Pixel Experience
4. I had to use PixelExperience_Plus_arm64-ab-13.0-20230329-UNOFFICIAL to get anything to boot.
Click to expand...
Click to collapse
ok same environment as when i used A11 TWRP with ( OTG Mouse). but this time (no have A13 TWRP for T225), then my best friend is always Odin and fastbootD. Don't worry about it.
abc1054 said:
Is this only for t225 ? How about t220 ? Thanks
Click to expand...
Click to collapse
I don't have T220 then can't make custom-super.tar for this device but you can uses fastbootD or fastboot mode from new TWRP.
New Competitor Alpha Droid.
CRDROID 9.4 GSI