Related
Well, my phone cant enter in this modes, but the problem its that also cant enter to the system, i can only see the logo of samsung and then the screen turn off, I dont know what to do, because I cant use the odin because I cant enter in download mode, I dont know if there is a button to hard reset the phone. I was trying to put a rom of ics but i believe that the firmware was wrong for my phone. please help me.
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
How did you try to get into download and recovery. Be as specific as possible
JoseDavid said:
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
Click to expand...
Click to collapse
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
122ninjas said:
How did you try to get into download and recovery. Be as specific as possible
Click to expand...
Click to collapse
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
JoseDavid said:
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
Click to expand...
Click to collapse
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
creepyncrawly said:
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
Click to expand...
Click to collapse
I had a rom of supernexus for jelly bean, this rom run very fine, but i was trying to put the modem of one rom the ics, and in this moment the problems started, but i could enter in download mode and try to flash with a rom of ics, the topic its in spanish, and I couldn't read well because the rom its for s2, they don't specified the model sgh i777 :S, now I downloaded the rom what i need but i can enter in the download mode, I cant put the link because I'm new here
creepyncrawly said:
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
Click to expand...
Click to collapse
I'm doing the try right now without pressing the power button and then my phone screen display "Forcerd Upload by key pressing"
that help??
JoseDavid said:
I cant put the link because I'm new here
Click to expand...
Click to collapse
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
creepyncrawly said:
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
Click to expand...
Click to collapse
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
JoseDavid said:
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
Click to expand...
Click to collapse
Looks like he loaded bootloaders.
122ninjas said:
Looks like he loaded bootloaders.
Click to expand...
Click to collapse
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
JoseDavid said:
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
Click to expand...
Click to collapse
Nobody knows what can I do in that moment?
I put my i777 on download mode by removing the battery and putting it back. Hold the volume button down and connect the USB charger wait for the buttons to flash and disconnect the charger while holding the volume down button. If that doesn't work nothing will.
Sent from my SGH-I777 using Tapatalk 2
JoseDavid said:
Nobody knows what can I do in that moment?
Click to expand...
Click to collapse
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
creepyncrawly said:
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
Click to expand...
Click to collapse
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
JoseDavid said:
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
Click to expand...
Click to collapse
Glad u got it fixed! In the future only download roms from this Site and never flash bootloaders.
Sent from Team Pirate Headquarters
help please
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
jck203 said:
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
Click to expand...
Click to collapse
can you interrupt the bootloop by trying to get to recovery (holding VOL UP + VOL DOWN + POWER until recovery menu appears) and then go to backup-restore and restore a backup? That's what I would try. IF that does not work, I would reinstall the drivers for andoid on your pc --even though you had them working (presumably) once before. After reinstalling the drivers then odin should (may!) see the phone and work.
good luck
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
I really need somebody's Help, I followed these instructions on how to root a Galaxy SII:
Maxwell Shifman
The Flashing Process
Make sure your phone is disconnected from the computer and switched off before starting.
Download Odin3 v1.85 (first post) and the KF4 kernel (CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.zip – fourth post) from Chainfire’s SGS2 CF-Root thread at Xda-Developers. You will need to register on the forum to download the files – highly worthwhile anyway.
Extract the two ZIP files into a new folder. You should have the following files in the folder:
image
Open Odin3. Click on the PDA button and select the CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.tar file. Make sure that “Re-Partition” is not selected. Your screen should look similar to this:
image
Now the only *remotely* confusing part – placing your phone into download mode. With your phone already switched off, simultaneously hold down the Home (middle) button and the Volume-Down (on the left hand side) button, then hold the Power button (on the right hand side). If you hold this button combination correctly you will see the following screen (if it didn’t work, you’ll need to switch your phone off and try again):
image
Press Volume-Up and you should see this:
image
Now we are ready to flash the kernel. Plug the phone into your MicroUSB cable. If you are doing it for the first time, some drivers may automatically install to allow communication with the phone in download mode. Once this is complete, check your Odin3 screen for the following changes:
image2
If you are still with me at this stage, you are good to go. Press Start in Odin3 and let it do its magic (the phone’s screen will change to a progress bar so you know it is doing something).
The phone will reboot and you are done.
Click to expand...
Click to collapse
and I ended up getting stuck on the boot screen with the yellow triangle. I don'r know what to do next. :crying:
Jazzper001 said:
I really need somebody's Help, I followed these instructions on how to root a Galaxy SII:
and I ended up getting stuck on the boot screen with the yellow triangle. I don'r know what to do next. :crying:
Click to expand...
Click to collapse
Can you go into download mode? If yes, try flash stock firmware. If no, I guess you'll need to buy a USB Jig then you can flash stock firmware.
AzriHafiz said:
Can you go into download mode? If yes, try flash stock firmware. If no, I guess you'll need to buy a USB Jig then you can flash stock firmware.
Click to expand...
Click to collapse
Yes I still can. What do I do sir? What is a USB Jig? I am really new at this.
Great! Now go find stock rom for your device. And flash it using Odin. About USB Jig, it's a tool to help you enter download mode when your device is bricked. But don't mind about that, just focus on finding stock ROM for your device and flash it using Odin.
Hey.
I've tried to find the answer to this through your forums but I'm afraid I'm a phone thickie!
My phone keeps turning off and has the dead android with the red triangle and says successfully applied CSC. I haven't done anything to make it do this!
Could someone please explain in simple terms if I can do anything to recover the phone? I would be very grateful!
Thank you,
Terri
terri1972 said:
Hey.
I've tried to find the answer to this through your forums but I'm afraid I'm a phone thickie!
My phone keeps turning off and has the dead android with the red triangle and says successfully applied CSC. I haven't done anything to make it do this!
Could someone please explain in simple terms if I can do anything to recover the phone? I would be very grateful!
Thank you,
Terri
Click to expand...
Click to collapse
Your phone is partially bricked (stuck or unusable). Don't worry, first you need to download stock 4.1.2 rom from sammobile onto your PC, then extract the zip file. Make your phone go into download mode (hold power button, home button, and volume down), you should then confirm to go into download mode. Connect your phone to your PC, then download, install then open odin (two of my guides I have attached odin so you can download from there. Click on AP or PDA and locate the tar.md5 or tar file in the extracted folder and then click start. Let your phone flash all of the files. Once done, quickly make your phone go into recovery mode (press and hold volume up, home button, power button) then you should see the recovery menu, choose and confirm factory reset and wipe cache partition. After that's all done, you can reboot to system.
Hope this helps, gsstudios
Hello. Thank you for your help. But it says failed ?
Might I be doing something wrong?
My n900p is hardbricked. I had tried booting into recovery after installing CWM from playstore. I read on this forum that i can use a debrick image. Can someone send a link? My device ran lollipop. Its n900p
nanatheo said:
My n900p is hardbricked. I had tried booting into recovery after installing CWM from playstore. I read on this forum that i can use a debrick image. Can someone send a link? My device ran lollipop. Its n900p
Click to expand...
Click to collapse
Is it just stuck on the boot logo ? ( soft brick ) If you can boot into download mode ( by pressing power, menu, and volume down buttons at the same time, then a new page will come up than press the volume up button ) if this works than your device is not hard bricked. Hard bricked is when nothing works you press the power button and the screen does not light up at all with a charged battery, and yes there is a file that you can place on your sd card to place the device into download mode.
Ok lets assume you can get into download mode. Just Odin flash a new Lollipop OS, click on rom flashing basics in my signature and follow the instructions make sure you flash The Lollipop OS Twice to get a clean install. If you do have a hard brick let me know I have the debrick file to put on your sd card, or you can buy a USB jig, or make one ( there are several youtube videos that show how to do it if you have an old plug laying around ) to get your device to boot into download mode.
It wont go to download or recovery mode. I will be glad if you can get me the debrick file
nanatheo said:
It wont go to download or recovery mode. I will be glad if you can get me the debrick file
Click to expand...
Click to collapse
Edit: First you could try to plug your usb charging cable in to a PC and your device then try the three finger method ( press the power, menu, and volume down buttons at the same time ) to see if it will boot up into download. ( this supplies power in chase the battery is dead )
Or you could build a usb jig to boot into download mode the link is here https://www.youtube.com/watch?v=Rdn5GoRjhn0
Ok first its been a long time. I have three unbrick files I can't remember which one works, I can tell you how to do it.
First pull the battery then pull your sd card, hopefully you have the adapter for the sd card so you can install it in your PC. Once installed in your PC you need to format (erase) all the data on the sd card.
Now copy and paste "one" of the unbrick files on the sd card. Replace the sd card back in the device and reinstall the battery and try to boot the device. It should boot in to download mode. Then you should be able to Odin flash from there.
Here are the links to the unbrick files 1. http://www.mediafire.com/download/c396cy9uxyg7mck/debrick.img 2. http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick_IMG 3. http://www.mediafire.com/download/l290jcibb29q4r0/Unbrick_IMG.gz
Remember to only use "one" at a time, and the sd card needs to be blank before you install the files, I hope one works for you it can't hurt to try.