Related
I use my tablet mainly out doors, in a vehicle. I found the glare to make it nearly unusable, especially for video. I had ordered the skinomi screen kit based on suggestions here but ordered it before I realized that glare was going to be such a large factor.
The threads I found though were from a few months ago and were mostly focusing on perfect fit. Reducing daylight glare is a far greater concern for me over perfect fit. I've read a lot of people trying and having issues with Nushield's dayvue skin and I'm also looking at the one from B and E. Anyone have experience with these or others?
I'm planning to return the skinomi kit unless someone has found it to reduce daylight glare.
I agree that an anti-reflective anti-glare film is by far the most important thing to me.
Honestly the computer industry needs to look towards the eye glass industry when it comes to such matters. In fact I personally sent an email to HTC about such a thing & all I got is a "We'll pass it along to the appropriate dept". I saved my emails just in case.
Take for instance Crizal Lenses (which is what I wrote to HTC about). These lenses are fingerprint, dust, dirt, scratch & water resistant. On top of that they are anti-reflective, anti-glare & enhance color & clarity..what more could you ask for? I can't say for sure if it is a film or coating, it doesn't matter. If the electronics industry would utilize such a thing i thing we'd have a winner here.
I wonder what an eyeglass shop would say if you brought your gtablet in and asked them to put the antiglare coating on. leneses get a coating for the scratch resistance and glare reduction, not sure why they couldn't coat your screen glass the same way.
Pexcer said:
I use my tablet mainly out doors, in a vehicle. I found the glare to make it nearly unusable, especially for video. I had ordered the skinomi screen kit based on suggestions here but ordered it before I realized that glare was going to be such a large factor.
The threads I found though were from a few months ago and were mostly focusing on perfect fit. Reducing daylight glare is a far greater concern for me over perfect fit. I've read a lot of people trying and having issues with Nushield's dayvue skin and I'm also looking at the one from B and E. Anyone have experience with these or others?
I'm planning to return the skinomi kit unless someone has found it to reduce daylight glare.
Click to expand...
Click to collapse
I bought two types, one was a clear one and the other was an anti-glare protector, both I found on Amazon made by Aurum. I like the anti-glare one, controls the glare and the fingerprints.
I've been looking at some reviews including a very lengthy one from a couple of years back on Youtube where he tried about NINE different brands (Including anti-glare or crystal from the same manufacturers) and he tried pretty much most of the known brands including Zagg. He did miss out Martin Fields and a few others though.
I've seen the XO skins are pretty easy to apply wet. Much easier than the Zagg.
XO aplication.
http://www.youtube.com/watch?v=-Td0vTcKMME&feature=related
Brief thumbs up from someone.
http://www.youtube.com/watch?v=VJGJKH8BGz0
XO skin for TF
http://xoskins.com/laptops-tablet-r...ors/asus-eee-pad-transformer-screen-protector
Large shooutout of various screen protectors. But it's a couple of years old and for a tablet PC rather than pads.
http://www.youtube.com/user/tonkabui#p/u/0/9XdVHL1M7vM
I am going to continue looking. But if anyone finds the perfect screen protector let me know. That XO looks easy to apply. But I want anti-glare and anti-reflectin as well as anti-smudge and 0 bubbles (in other words eacy to apply). Protection from scratches is actually pretty low down my list of wants.
If anyone can post their experiences (good or bad) of various screen protectors please do so here. I noticed there is a reasonably priced TF1010 anti-glare protector made by Posr.us and has two five star reviews on Amazon. Also someone called MFX is making one as well as Martin Fields and SGP Steinheil.
Thanks I needed one still and this looked decent and easy to apply (I prefer the wet application) I bought it and used coupon code "retailmenotxo" for 15% off ... it covered more than the shipping so that was cool.
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
well my screen has a scratch only had it a week
rgalarza75 said:
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
Click to expand...
Click to collapse
Well, scratch resistant =/= scratch proof, so all those people who say Gorilla Glass is the reason why you shouldn't need a screen protector are fooling themselves. I personally have a clearfreak protector on my transformer. It definitely makes me feel more at ease when I use it.
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
I picked up a dcmugen antiglare from ebay and I love it. Damp or dry install, the type with the two peel off layers, and repositionable to boot. It ships from Asia, and mine came with a slight crease causing bubbles that cant be flattened. I've requested a replacement, waiting to see if they follow through. So much easy to use indoor and out, and far fewer fingerprints to clean off.
Sent from my Transformer TF101 using XDA Premium App
Got a zagg at bestbuy today because I was bored more or less. Installation went well even though the thing stuck to itself. But a few hours later and I'm bubble and wrinkle free nd protected. Now to decide if I want a spg crytal or not....
mybikegoes200 said:
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
Click to expand...
Click to collapse
I bought one as well, but it looked like crap on mine. Hen again im terrible at applying these things. I usually let Verizon put screen protectors on my phone.
Has anyone tried the skin protector from PhantomSkinz? I have their carbon fiber back skin and it looks great and is durable
Sent from my DROID X2 using XDA App
My experience with Zagg has been mixed with all my devices but their customer support is good. If you get a bad protector(line down middle, or little imperfections) they will send you another.
The XO skin looked very promising, and for $10 cheaper I thought I would give it a shot. Just placed an order for the XO skin.
Use discount code retailmenotxo for $3 off(free shipping pretty much)
Pulled the trigger on an XO
after watching all the youtube reviews, i decided that the XO looked best.
ordered one this morning.
just a thanks to all the folks responsible for putting the links and testing together in one place for time-challenged guys like me.
btw, i think the transformer is one of the smartest purchases i've made in the last few years. i'm thoroughly enjoying it.
marvin
Following up on my earlier post. Installed the XO skin in my university's clean room(0 dust, yes I wore the cleanroom suit) and it has streaks. The protector quality is very good but once you put it on there are visible streaks all over. I kept the applicator wet so there would not be "burn marks" as specified by the instructions.
Going to ask for a refund... maybe I'll give Zagg another try. My first ZuneHD protector was wonderful but the 2nd one I got had a big line down it(bad QC).
The perfect screen protector
I always have problems applying the screen protectors to any of my devices, so I did some research and decided to go with one made by a company called Aurum. The deciding factor was that it had a large cut out for my camera so its easier to apply. Overall, I am very happy. I got the two pack in case I messed up the first one.
http://www.amazon.com/Asus-Eee-Pad-...4?ie=UTF8&s=electronics&qid=1308242480&sr=1-4
I dont think I will ever buy the wet applicator types again, the dry is just simpler and gives me choices in whether I want a clear or the anti-glare. Hope this helps
Here is the link to the anti-glare offered by Aurum in case anyone is interested: http://www.amazon.com/Transformer-M...1?s=electronics&ie=UTF8&qid=1311083745&sr=1-1
I usually get Bodyguardz for all my gadgets (mostly phones). It just feels better than Zagg's invisible shield and other screen protectors.
Anyone tried using Bodyguardz? I'm thinking about getting either the full body protector or just the screen protector. Hmmm this is tough.
Following up... after 24 hours drying/curing it looks much more acceptable. The funny part is there is a tiny black spec under the protector. I don't know how it got there since I was in a cleanroom!
Found this one in Amazon, similar to the Aurum with anti-glare.
Anyone has used this ? Is this any good ?
HandHelditems - Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector (3 Pack) (Free HandHelditems Sketch Universal Stylus Pen)
http://www.amazon.com/gp/product/B0056K5D0G/ref=ox_sc_act_title_2?ie=UTF8&m=A1NOY9EOR8TXD6
Hmmm... I have previously considered to buy it too, but I've seen the Gorilla Glas Test with the Transformer in a YouTube video... you dont need a screen protector
I just got a screen protector from Photodon. Their MXA film is great. It was a bit of work to put it on with no dust and correctly aligned. But once it's on it looks pretty good. It's got a glossy finish, so it looks just like the original screen. You can hardly tell that there is a screen protector on the transformer. It is pricey at almost $20.00 each, ut the screen is still sharp and crystal clear with none of the haze that a lot of cheap screen protectors have.
xxx.photodon.com/p/MXA-5445-01.html
I used to have Bodyguards for my HTC Touch Pro and it peeled after three months both times that I used them. Now I use Phantom Skinz and I get no orange peel effect and I've had one on my HTC Evo 4G for almost 1 1/2 years with no peeling and no orange peel effect. Smooth as glass and you can't even tell it's on there.
Now I have Phantom Skinz screen protector on my TF and Phantom Skinz Chromatics white carbon skin for the back side. Very nice to say the least.
I would highly recommend a screen protector for the TF because although it has Cornings Gorilla glass, it sux for finger prints and fingerprints are easier to wipe off of a sceen protector than the Gorilla glass.
im using the steinheil Ultra Crystal. also use it on my phone.
I'm looking for a screen protector with anti-glare if possible, what is the best one to buy?
Was going to suggest Skinomi, then saw you need anti glare. I never found one I liked with "ant glare", and I don't know of any for the View/Flyer. Sorry =/
If anti-glare becomes too difficult to find, then I highly suggest the Skinomi. I have it on 3 of my tablets currently, and have tried multiple different companies protectors including whatever Sprint sells, BestSkinEver, Zagg, Bodyguardz and a bunch of generic ebay screen protectors. After trying all the other brands, the Skinomi is my favorite and all I'll use on any touchscreen device now.
Don't know about "best", but I quite like the Skinomi (wet apply) protector on my Flyer as well.
http://www.skinomi.com/htcflp.html
I have Bodyguardz on my phone, which is also a good protector. They didn't make protectors for the Flyer, when the tablet when the first came out (why I decided to try Skinomi) but now they do. They have anti-glare, but its backordered:
http://www.bodyguardz.com/screenguardz-htc-evo-view-4g-htc-flyer-protection-cases-screen-protectors-covers-shields-skins-films.html?dir=asc&order=sort_priority
I use this one
http://shop.brando.com/brando-works...otector-htc-flyer-p510e-_p05871c1315d039.html
You're ordering from Hong Kong, so it takes a while, and the credit card hassle with overseas orders. But really high quality.
I am currently using this one from Amazon. The only thing is you have to use a hole punch to create the hole for the front camera. Other than that, it is a great screen protector that is matte.
Forum wont let me post links yet, so search for Great Shield Ultra Anti Glare screen protector for HTC Flyer.
Official htc screen protectors are £5 ($8) on amazon uk, they're great.
Any of these work better with the pen?
It's not anti-glare, but I have this screen protector, and it's fantastic. Perfect size with cut outs where they're needed. Very easy to apply as well. I use the Scribe daily, and this screen protector works great with it.
GreatShield Ultra Smooth Clear Screen Protector Film for HTC Flyer / Sprint EVO View 4G
I tried an anti-glare screen protector when I first received my View, but the graininess was much too distracting for what I primarily use it for - reading. On phones, I generally don't have a problem with the graininess that anti-glare screen protectors add. But that's probably because I'm not staring at my phone and reading for hours at a time. The size difference in the screen also makes it more pronounced. I'll put up with having to wipe finger prints off and making adjustments to avoid glare to have a better overall experience. This is the anti-glare screen protector that I used - HHI HTC EVO View 4G Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector. It did the job quite well, but it just wasn't for me on a screen this size.
I'm considering buying an anti-glare one for my Flyer because I'm getting tired of adjusting the angle when working on my tablet.
I was wondering how the stylus works on these anti-glare screen protectors? The one I have on now (simple screen protector) gets scratched easily when using the stylus.
Are these behaving better?
Anti Glare, expensive but from a good company... http://www.boxwave.com/htc-flyer-screen-protectors/htc-flyer-cleartouch-anti-glare/bwpdd/f-ztwp/
geojoking said:
I'm considering buying an anti-glare one for my Flyer because I'm getting tired of adjusting the angle when working on my tablet.
I was wondering how the stylus works on these anti-glare screen protectors? The one I have on now (simple screen protector) gets scratched easily when using the stylus.
Are these behaving better?
Click to expand...
Click to collapse
I've had this clear screen protector applied since late December. I use the tablet with the Scribe daily, and I have yet to get a single scratch on it.
When I used this anti-glare screen protector, the Scribe never left a scratch either. The Scribe worked fine with it, but since the screen protector was somewhat thicker than a clear one (which seems to be the norm with anti-glare screen protectors in my experience), I did experience some issues with it not always registering and a loss in precision at time. But it wasn't anything that was terribly noticeable most of the time. I Haven't had any problems with the clear GreatSheild in the that department.
Thank you for your answer.
Surely the screen protector I have on right now is of lower quality and I'll have to change is ASAP. I'll just have to decide between a clear or anti-glare one. But since the viewing angle and outside readability are still issues for me, I think I'll go for the anti-glare one.
I'm having trouble deciding on a good matted glass protector for my shield. The only complaint I really have about it is the massive glare I get when going outside
But I've never had to buy this kind of accessory before so I don't know what brands are good or not
Any comments appreciated :good:
I currently have a tempered glass protector, and although it looks and feels great, glare is horrible outside. Since this tablet will be used for the primary display to control a 3DR SOLO Quadcopter drone once released next month, I need something that will work better outdoors.
Going to give this set a try. Not tempered glass, but I don't think you can get tempered glass protection that has a matte finish.
Mr Shield Anti-Glare Protector (3 pack)
Will report back once I give it a try, maybe even do a video review comparing it to what I currently have while outside in direct sunlight.
Let us know how the fit is as a lot of the reviews for the other devices indicated it's not a tolerable fit...
Hi everybody.
I have been testing a couple of screen protectors in the past and wanted to share my experince with you.
The best one in my opionen is from SAMSUNG itself. It simply has the best quality. If you buy it on amazon its only $11. (http://amzn.to/2xGpWWs) I think for 2 screen protectors thats a good value for the money.
I even made a video review about it to tell what I like about it. If you are interested in it you can watch it here:
https://youtu.be/S2ixW_dvx8s
What are your experiences with screen protectors? I am curious. Share your opinions here
Though mine isn't really a screen protector, I am using the lifeproof case for my S8. Have been very happy with it. The screen protector built into the case is already curved so it fits easily. People have complained about issues with the curved part of the touchscreen and responsiveness. I have not experienced this issue at all. I have always had good luck with the Zagg Glass Protector with other phones, not sure how that is with the S8. Something to potentially look at for people.
chris674 said:
Though mine isn't really a screen protector, I am using the lifeproof case for my S8. Have been very happy with it. The screen protector built into the case is already curved so it fits easily. People have complained about issues with the curved part of the touchscreen and responsiveness. I have not experienced this issue at all. I have always had good luck with the Zagg Glass Protector with other phones, not sure how that is with the S8. Something to potentially look at for people.
Click to expand...
Click to collapse
I see. THe big problem with most of the screen protectors for me was that most of them could not hold to the edges and came off pretty early. So that's a big criteria for a good screen protector. THe one by samsung still covers my whole front after months which is one of the many reasons I like it so much.
Glass protectors are to thick and make the phone too thick in my opionion. But maybe I should give it another shot..
yes but glass protectors are designed to protect your screen in an accident, the normal film ones you have will not protect your screen from accidental damage, i presently have a htc phone with a glass screen protector on it and it has saved my phone many times as the glass screen protector cracked but the screen underneath was unmarked. I know have a samsung s8, i bought two glass screen protectors from amazon uk, the reviews were made by 72 viewers and almost 100%. i fitted the screen protector perfectly and it didnt stick to the curve edges and was very unresponsive to touch , i sent them back for full refund which i got. most importantly most of the reviews are fake reviews, amazon should stop this. ive left my feedback on amazon.
These flimsy plastic screen protectors make no sense to me. Your phone glass is already harder than anything you'll throw into your pocket. The metal on your keys and **** can't scratch your screen anyway and all these would do is protect from scratches by getting scratched themselves.
People want screen protectors to protect from cracking and shattering the phone not to protect from scratches. The screen is already mostly scratch proof unless you're rubbing it up against a pointy edge of some harder glass which I seriously don't think you'd be doing.
Anyone try Nano Fix it?
Shofar1
best Screen Protector for the S8
I almost feel bad that I underestimated the installation part as I almost wanted to throw the first screen protector I used. If done correctly and patiently, you will have a premium looking phone. Don’t rush it if you don’t want to regret it. So for you guys who are afraid of the “wet installation”, give it a try. It was a bit difficult for me, but I’ll do it again if it means maintaining the high quality of my Samsung Galaxy S8. And besides, the S8.
https://www.amazon.co.uk/gp/aw/d/B07DF82TJ3/ref=sspa_mw_detail_5?ie=UTF8&psc=1
I bought this one, though I will give it a try. It works perfect and holds very strong as well. I bought same brand for s7 edge and it is the same quality.
Sent from my SM-G950F using Tapatalk
IDK for you but I'm satisfied with this goo.gl/8brXA2 straight from Amazon and reasonable price also I think they have for s8 plus goo.gl/gMg9Wb
https://www.ebay.com/itm/153275884028?var=&ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
i tested this one works perfectly
the guard actually sticks to the device via glue with UV just like whitestone one but is lot cheaper
I don't use any screen protector, I realized that touching and stroking the screen was very sensational.
I can totally agree with you. In the past, I've always used multiple screen protectors.
I have my S8+ device a bit over a year now and I can see only a micro-scratches, which are invisible in the daily usage.
Besides, what's the point of buying screen protectors for, let's say 50$ and replace them every year? I'd rather save this money and buy sooner the new, fresh model.
Hi. I would like to know what you all end up using on your screen. I just bought me an S8+ and are desperately looking for a good screen protector that i can use with a case.
Please enlighten me