Since the device runs on arm-based kernel and firmware, It would be great if someone make a custom vendor with arm64 support.
The device has binder architecture.
This would allow users with the following device to run arm64 GSIs and run apps that has discontinued arm support such as Instander, A modded version of Instagram.
Here's the device's kernel :
GitHub - mohammad92/android_kernel_samsung_a02q: Kernel source for the Samsung Galaxy A02s (Snapdragon)
Kernel source for the Samsung Galaxy A02s (Snapdragon) - GitHub - mohammad92/android_kernel_samsung_a02q: Kernel source for the Samsung Galaxy A02s (Snapdragon)
github.com
I would love to be a tester for it in case someone makes one.
tangy912 said:
Since the device runs on arm-based kernel and firmware, It would be great if someone make a custom kernel with arm64 support.
The device has binder architecture.
This would allow users with the following device to run arm64 GSIs and run apps that has discontinued arm support such as Instander, A modded version of Instagram.
Here's the device's kernel :
GitHub - mohammad92/android_kernel_samsung_a02q: Kernel source for the Samsung Galaxy A02s (Snapdragon)
Kernel source for the Samsung Galaxy A02s (Snapdragon) - GitHub - mohammad92/android_kernel_samsung_a02q: Kernel source for the Samsung Galaxy A02s (Snapdragon)
github.com
I would love to be a tester for it in case someone makes one.
Click to expand...
Click to collapse
Count me in as one of the testers.
bumped thread.
kernel is already arm64 only need arm64 vendor
smiley9000 said:
kernel is already arm64 only need arm64 vendor
Click to expand...
Click to collapse
Then a custom vendor would be great.
tangy912 said:
Then a custom vendor would be great.
Click to expand...
Click to collapse
The Samsung A20s has the same internals down to the very chip and runs 64 bit, porting its vendor to the A02s may be possible
Bumped thread.
tangy912 said:
Since the device runs on arm-based kernel and firmware, It would be great if someone make a custom vendor with arm64 support.
The device has binder architecture.
This would allow users with the following device to run arm64 GSIs and run apps that has discontinued arm support such as Instander, A modded version of Instagram.
Here's the device's kernel :
GitHub - mohammad92/android_kernel_samsung_a02q: Kernel source for the Samsung Galaxy A02s (Snapdragon)
Kernel source for the Samsung Galaxy A02s (Snapdragon) - GitHub - mohammad92/android_kernel_samsung_a02q: Kernel source for the Samsung Galaxy A02s (Snapdragon)
github.com
I would love to be a tester for it in case someone makes one.
Click to expand...
Click to collapse
old_build_for a02s-m02s_premissive.zip
drive.google.com
I saw it in telegram but it's worth trying this beta test flash only arm64 gsi (arm32 not supported) and you need a permissive kernel (you can try the permissiver v5 module)
Hipipapa said:
old_build_for a02s-m02s_premissive.zip
drive.google.com
I saw it in telegram but it's worth trying this beta test flash only arm64 gsi (arm32 not supported) and you need a permissive kernel (you can try the permissiver v5 module)
Click to expand...
Click to collapse
Twrp zip file permissiver v5* and bootloop fix (android 12-13) https://t.me/galaxy_a02s/8633
Hipipapa said:
old_build_for a02s-m02s_premissive.zip
drive.google.com
I saw it in telegram but it's worth trying this beta test flash only arm64 gsi (arm32 not supported) and you need a permissive kernel (you can try the wou
Hipipapa said:
Twrp zip file permissiver v5* and bootloop fix (android 12-13) https://t.me/galaxy_a02s/8633
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Well, that's cool. However, It would have been great if the dev posted it on Github and made it open-source
Hipipapa said:
Twrp zip file permissiver v5* and bootloop fix (android 12-13) https://t.me/galaxy_a02s/8633
Click to expand...
Click to collapse
Wow. It seems that it can run Secure GSIs as well unlike the stock vendor which cannot.
ARM64 vendor for a02q/m02q SDM450
Crdroid 7.16 added on this zip as a test
You can flash any GSI Android 10/11/12/13+ Via Fastbootd
You need to flash bootloop fix for fix bootloop in android 12/13+ (bootloop means stuck in boot animation crdroid linageaos like.. not samsung a02s logo)
Beta Release
Cannot Boot any arm32 rom
Bugs
Same As Arm32
User said no fast charging only normal Charging
No call Sounds
Premissive Kernel
Ancient Os 13 Booted
Need to test
Use TWRP for Flash
Download arm64
old_build_for a02s-m02s_premissive.zip
drive.google.com
More info @telegram
Samsung Galaxy SDM439/450 Development 🇱🇰
You can view and join @samsung_galaxy_m01_a01_m11_a11 right away.
t.me
Related
UPDATE!​
Spoiler: Previous Announcements
I checked MediaFire download counts today and I can't believe my own eyes... Look at this!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
01selinux 222 downloads
boot.img 922 downloads
ENG BOOT J120G.IMG 769 downloads
j120F-kenel-sec-fix.zip 759 downlods
WITEX ROM.zip 991 downloads
The current min download count is already 200+ and the current max is currently at 900+! OMG, thanks to all of you and the J1 (2016) community! Let's hit 1000 downloads! Yay!
NEWS!​
So, I've been busy at school lately to prepare my final exam. I also finally got around to clean up this messy thread and re-design it a little. OK, let's get to the point. I found Samsung's ENG BOOT.IMG for our device a few weeks ago. What is a ENG BOOT.IMG? Basically, it's Samsung's engineering boot image used to test this device. What feature does it benefit us? With this boot image, you can get SELinux permissive (Yup. I've said that. PERMISSIVE! Still not enough? You need to get your eyes fixed LOL (Just joking). I think flashing this with Odin 3 won't trip the KNOX warranty because why would Samsung make a boot.img that would trip the company's own warranty, am I right?
Oh yeah, If you follow my thread a few months ago, you will know that my phone actually fell and broke it's screen. My phone is finally fixed!!! Yay!!! Also, there is no damage to the motherboard. Thank god. I also have a bad news, as my examination starts at October of this year and I'm busy preparing for my examination, my promised custom stock based ROM will need to wait until November/December to finish making customizations to it. My previous attempt to boot the ROM still has many random application force closes. I'm sorry for not making my promises to finish up the custom ROM a few months ago. I hope people waiting for my ROM for so long will accept my apologise. Thank you.
Click to expand...
Click to collapse
THANK YOU GUYS FOR ALL YOUR SUPPORT! MAY THE J1 (2016) GROW EVEN MORE AND BECOME SUCCESSFUL!!
As someone has problems with WiTeX ROM, I have the original version (Maybe the first or second release of this ROM) from... maybe April or May 2017? I uploaded the file to MediaFire. This is old version. The UI (User Interface) is Android 6.0 Marshmallow. I cannot guarantee if this version fixes the VoLTE. I haven't used VoLTE for almost 3 years on this phone. I also cannot test this as my phone is in a very very bad condition (Screen cracked as hell. No display etc.). Luckily Vysor (by Koush Dutta) saved the day and I was still able to use this phone. I was very lucky because I left USB Debugging open (Without it open, I can never use this phone again). I use the phone by connecting it via USB to my laptop. I cannot use recovery mode (TWRP) because Vysor doesn't support casting from TWRP (and it never will support that feature).
Spoiler: Unnecessary Self Advertising
NOTE: I also have a website now Growtopia Jaw. The website's design is still in progress. I ended up using WordPress because it is very powerful with tons of plugins support. I also have Let's Encrypt certificate to keep the webiste Secure (The Green Padlock). Follow my daily activity and projects if you want to know more about me!
Screenshot: (How I use my phone everyday)
13.10.2017
I'm no longer using this phone and has moved on with an ASUS ZenFone Go. If you have any interest on taking over this thread, please feel free to PM me. I'll hand over this thread if he/her meets this requirements below:
1. Have knowledge in Android Development
2. Have basics on typing in XDA Forums
3. Have patience when replying to users in this thread and not using bad words/swear words in sentences
4. Have basics in English language
5. Been a member in XDA Forums for over 5 months
Custom ROMs​
1. PUmA_Rom
2. WiTeX Rom
3. CleanStockEdition v1.1
4. Yandex Rom
5. RefleX
6. Custom Rom For J120F
7. Stock Mod 2017
8. [NEW!] WiTeX ROM (April/ May 2017 Edition)
9. [NEW!] [UNSTABLE!] [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02]
10. [NEW!] [UNSTABLE!] [ROM][7.1.2][BETA][j1xlte][21.01.2021] LineageOS 14.1 for Samsung Galaxy J1 (2016)
11. [NEW!] [03.01.17] [SM-J120G] Dr.Ketan ROM I Jio VoLTE I PreRooted (Magisk)
*I'm not the developer of these ROMs. I just found these ROMs over at the Russian Forums (4PDA). If you have any problems with the ROMs above, please ask the developer of the ROMs to help you. Developer's names are listed below in the "Credits" section. Thank you.
Miscellaneous​
1. Odin 3
2. Samsung USB Driver
3. TWRP Recovery
4. SuperSU
5. [UNOFFICIAL] Material Design Xposed Installer by DVDandroid
6. Custom Kernel
7. ENG BOOT J120G
8. j120F-kernel-sec-fix.zip
9. [NEW!] [RECOVERY][3.3.1-0][UNOFFICIAL] TeamWin Recovery Project for Samsung Galaxy J1 (2016)
10. [NEW!] [RECOVERY][3.2.3][UNOFFICIAL] OrangeFox Recovery Project for Samsung Galaxy J1 (2016)
11. [NEW!] [RECOVERY][3.2.3-0][UNOFFICIAL] RedWolf Recovery Project for Samsung Galaxy J1 (2016)
*For SELinux permissive to work on my custom kernel (NOT SAMSUNG'S ENG BOOT.IMG!!!), you need to put this 01selinux in /system/etc/init.d
Developer​
1. Samsung Galaxy J1 (2016) SM-J120G Source Code
2. Google GCC 4.8 Prebuilt Toolchain
3. Linaro 4.8 Prebuilt Toolchain
4. SaberMod 4.8 Prebuilt Toolchain
Credits​
1. @puma-m1 at 4PDA Forums for PUmA_Rom
2. @javad490 for Custom Rom For J120F, WiTeX Rom and j120F-kenel-sec-fix.zip
3. @n1^myFurry^ at 4PDA Forums for CleanStockEdition v1.1
4. @Maks-Mix. at 4PDA Forums for Yandex Rom
5. @RavensOracle at 4PDA Forums for RefleX
6. odindownloader.com for Odin 3
7. Samsung for Samsung USB Driver, ENG BOOT J120G and Samsung Galaxy J1 (2016) SM-J120G Source Code
8. @Sanjeev_Chauhan at Gsm Developers for TWRP Recovery
9. @Chainfire & Coding Code Mobile Technology LLC (CCMT) for SuperSU
10. @DVDandroid for [UNOFFICIAL] Material Design Xposed Installer
11. @DooMLoRD for Modified Google GCC 4.8 Prebuilt Toolchain
12. @Christopher83 for Linaro 4.8 Prebuilt Toolchain
13. @sparksco for SaberMod 4.8 Prebuilt Toolchain
14. @samtolvar at 4PDA Forums for Stock Mod 2017
15. @alexenferman for their contribution in [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02]
16. @cıyanogen for their contribution in [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02], [ROM][7.1.2][BETA][j1xlte][21.01.2021] LineageOS 14.1 for Samsung Galaxy J1 (2016), [RECOVERY][3.3.1-0][UNOFFICIAL] TeamWin Recovery Project for Samsung Galaxy J1 (2016), [RECOVERY][3.2.3][UNOFFICIAL] OrangeFox Recovery Project for Samsung Galaxy J1 (2016) and [RECOVERY][3.2.3-0][UNOFFICIAL] RedWolf Recovery Project for Samsung Galaxy J1 (2016)
17. @lzzy12 for their contribution in [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02] and [ROM][7.1.2][BETA][j1xlte][21.01.2021] LineageOS 14.1 for Samsung Galaxy J1 (2016)
18. @TBM 13 for their contribution in [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02] and [ROM][7.1.2][BETA][j1xlte][21.01.2021] LineageOS 14.1 for Samsung Galaxy J1 (2016)
19. @bengris32 for their contribution in [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02] and [ROM][7.1.2][BETA][j1xlte][21.01.2021] LineageOS 14.1 for Samsung Galaxy J1 (2016)
20. @imranpopz for their contribution in [ROM][Alpha] Lineage OS 14.1 for Samsung Galaxy J1 2016 Exynos [2020-11-02] and [ROM][7.1.2][BETA][j1xlte][21.01.2021] LineageOS 14.1 for Samsung Galaxy J1 (2016)
21. @dr.ketan for his work on [03.01.17] [SM-J120G] Dr.Ketan ROM I Jio VoLTE I PreRooted (Magisk)
22. @mbtt107OT for their contribution in [RECOVERY][3.3.1-0][UNOFFICIAL] TeamWin Recovery Project for Samsung Galaxy J1 (2016), [RECOVERY][3.2.3][UNOFFICIAL] OrangeFox Recovery Project for Samsung Galaxy J1 (2016) and [RECOVERY][3.2.3-0][UNOFFICIAL] RedWolf Recovery Project for Samsung Galaxy J1 (2016)
Please press the "THANKS" button if I helped you in any shape or form!
Yes this is good thanks.
Growtopia Jaw said:
Hello Guys, good news for Galaxy J1 (2016) SM-J120G users!
I finally found some custom roms for our device! Actually it's not REALLY meant for our device but it's compatible. It has the same device specification as ours SoC, RAM Size etc. The only thing it's not the same is it does not support VoLTE. Other than that, it's all the same.
List of compatible ROMs​
1. PUmA_Rom
2. WiTeX Rom
3. CleanStockEdition v1.1
4. Yandex Rom
5. RefleX
6. Custom Rom For J120F
Click to expand...
Click to collapse
thanks, this Custom Rom is my Latest rom for j120F:
jss2017n j120F Custom Rom:
https://forum.xda-developers.com/showpost.php?p=70978622&postcount=103
javad490 said:
thanks, this Custom Rom is my Latest rom for j120F:
jss2017n j120F Custom Rom:
https://forum.xda-developers.com/showpost.php?p=70978622&postcount=103
Click to expand...
Click to collapse
Thanks for informing me. Will update the list. Keep up the great job!
Growtopia Jaw said:
Hello Guys, good news for Galaxy J1 (2016) SM-J120G users!
I finally found some custom roms for our device! Actually it's not REALLY meant for our device but it's compatible. It has the same device specification as ours SoC, RAM Size etc. The only thing it's not the same is it does not support VoLTE. Other than that, it's all the same.
List of compatible ROMs​
1. PUmA_Rom
2. WiTeX Rom
3. CleanStockEdition v1.1
4. Yandex Rom
5. RefleX
6. Custom Rom For J120F
NOTE: I'M NOT THE DEVELOPER OF THESE ROMS! I JUST FOUND IT AND SHARE TO EVERYONE WHO WANTS TO TRY THESE CUSTOM ROMS!
Miscellaneous​
1. Odin 3
2. Samsung USB Driver
3. TWRP Recovery
4. SuperSU
5. [UNOFFICIAL] Material Design Xposed Installer by DVDandroid
For Developers​
1. Samsung Galaxy J1 (2016) SM-J120G Source Code
2. Google GCC 4.8 Prebuilt Toolchain
3. Linaro 4.8 Prebuilt Toolchain
4. SaberMod 4.8 Prebuilt Toolchain
CREDITS​
1. @puma-m1 at 4PDA Forums for PUmA_Rom
2. @javad490 for Custom Rom For J120F, WiTeX Rom and j120F-kenel-sec-fix.zip
3. @n1^myFurry^ at 4PDA Forums for CleanStockEdition v1.1
4. @Maks-Mix. at 4PDA Forums for Yandex Rom
5. @RavensOracle at 4PDA Forums for RefleX
6. odindownloader.com for Odin 3
7. Samsung for Samsung USB Driver and Samsung Galaxy J1 (2016) SM-J120G Source Code
8. @Sanjeev_Chauhan at Gsm Developers for TWRP Recovery
9. @Chainfire & Coding Code Mobile Technology LLC (CCMT) for SuperSU
10. @DVDandroid for [UNOFFICIAL] Material Design Xposed Installer
11. @DooMLoRD for Modified Google GCC 4.8 Prebuilt Toolchain
12. @Christopher83 for Linaro 4.8 Prebuilt Toolchain
13. @sparksco for SaberMod 4.8 Prebuilt Toolchain
EXTRA!!!
I have compiled a custom kernel based on J120GDXU1APF2 kernel source and J120GDXU1AQD1 boot loader. It should be compatible with all of the ROMs above (including stock ROM). I personally tested this custom kernel in @javad490's WITEX ROM and my tweaked stock ROM. It worked flawlessly. Also if you're using Smart Manager, please flash this j120F-kenel-sec-fix.zip in recovery as Smart Manager keeps reporting "Thread detected" message because of the custom kernel installed. If you're not using Smart Manager, good news! No need to flash that zip. I will post what's added and removed from the kernel as my computer is not with me now.
Proof
Oh yeah, SELinux permissive* and compiled with Linaro too!
Actually it's not that hard to compile a kernel from source because even I a 13 year old kid can do this. So it's not impossible to compile a kernel if you're older than me or whatsoever. All knowledge are gained from experience and patience. Good luck if you're learning to compile a kernel.
Kernel Features
Kernel Links
1. boot.img
2. j120F-kenel-sec-fix.zip
* About SELinux, you need to put this 01selinux in /system/etc/init.d
Please press the "THANKS" button if I helped you in any shape or form!
Click to expand...
Click to collapse
Hi
I install cleanstockedition 1.1 rom. everything is excellent but MTP doesn't work. i try different usb cable and different windows and systems but windows doesn't know my phone
could you please help me?
@javad490
thanks a lot
RouhollahNaby said:
Hi
I install cleanstockedition 1.1 rom. everything is excellent but MTP doesn't work. i try different usb cable and different windows and systems but windows doesn't know my phone
could you please help me?
@javad490
thanks a lot
Click to expand...
Click to collapse
Hello, I've downloaded CleanStockEdition v1.1 and tested that MTP is working well on my PC. Have you tried reinstalling the rom or download a new copy of the CleanStockEdition v1.1 rom? Have you also tried installing Samsung USB Drivers? If not, link is provided above in the first thread.
Here are the screenshots I've taken in my PC to show that MTP is working.
Growtopia Jaw said:
Hello, I've downloaded CleanStockEdition v1.1 and tested that MTP is working well on my PC. Have you tried reinstalling the rom or download a new copy of the CleanStockEdition v1.1 rom? Have you also tried installing Samsung USB Drivers? If not, link is provided above in the first thread.
Here are the screenshots I've taken in my PC to show that MTP is working.
Click to expand...
Click to collapse
thanks for your answer
this rom is not a zip file to install. this is a backup of a rom to restore. i restore it again but the problem doesn't solve. i install many mobile usb drivers too, pc recognize all samsung mobiles except mine!
RouhollahNaby said:
thanks for your answer
this rom is not a zip file to install. this is a backup of a rom to restore. i restore it again but the problem doesn't solve. i install many mobile usb drivers too, pc recognize all samsung mobiles except mine!
Click to expand...
Click to collapse
I'm sorry to hear that this is still not working for you. Does this problem occur in other rom?
Growtopia Jaw said:
I'm sorry to hear that this is still not working for you. Does this problem occur in other rom?
Click to expand...
Click to collapse
no this is just in this rom
other roms i installed occupy ram and my phone freezes. this rom was good if i could solve this problem and if didn't still it's ok and better of others.
please see the screenshot
RouhollahNaby said:
no this is just in this rom
other roms i installed occupy ram and my phone freezes. this rom was good if i could solve this problem and if didn't still it's ok and better of others.
Click to expand...
Click to collapse
I will look into the problem. Oops sorry I've forgotten to see the image attached in the attachment:highfive:
Growtopia Jaw said:
I will look into the problem. Oops sorry I've forgotten to see the image attached in the attachment:highfive:
Click to expand...
Click to collapse
But I want cm13 or cm14
---------- Post added at 03:38 PM ---------- Previous post was at 03:37 PM ----------
I want cm13 or cm14 roms
durga Prasad 123 said:
But I want cm13 or cm14
---------- Post added at 03:38 PM ---------- Previous post was at 03:37 PM ----------
I want cm13 or cm14 roms
Click to expand...
Click to collapse
For sm-j120g
javad490 said:
thanks, this Custom Rom is my Latest rom for j120F:
jss2017n j120F Custom Rom:
https://forum.xda-developers.com/showpost.php?p=70978622&postcount=103
Click to expand...
Click to collapse
is it work on j120g??
I'm sorry but cm 13 and cm 14 are not supported on this model. Developers at 4PDA (Russian Forums) also discussed on this topic and and said that cm 13 and cm 14 are considered off-topic because it is not supported on this phone. Porting ROMs are also not possible where I and @javad490 tried to port Android 6.0 (Marshmallow) from SM-J120A (Samsung Galaxy Express 3) and Samsung Galaxy J2 but failed. Even though we successfully built cyanogen/lineage, it may not boot or have more bugs than you can use. Currently, we don't have any developer who is advanced enough (correct me if I'm wrong) to build or maintain cyanogen/lineage on this phone. I hope anybody who is reading this and using a Galaxy J1 will understand this problem.
Thank you.
ahyaruddin07 said:
is it work on j120g??
Click to expand...
Click to collapse
Yes. This ROM works on SM-J120G. Brought to you by @javad490.
I need Resurrection Remix rom/leneage os for my Samsung Galaxy J1 (2016) SM-J120G
Can anyone help me please ☺
Thanks a lot
Such a great phone !! I just brought it and I love it !!
sorry for bringing this up on this closed thread ...but are smj120g and sm j120f roms r same..i mean is it possible to install smj120f custom roms in smj120g??
cortexjr said:
sorry for bringing this up on this closed thread ...but are smj120g and sm j120f roms r same..i mean is it possible to install smj120f custom roms in smj120g??
Click to expand...
Click to collapse
Don't be sorry! I created this thread to discuss about Samsung Galaxy J1 (2016). Yes, SM-J120G and SM-J120F ROMs are the same. Everything is same. Only the name are different. You can install SM-J120F ROMs on SM-J120G.
Sorry for the late reply! Hope you can forgive me!
Hello there,
Do you have a Galaxy A3 2015 but you're not fine with its look? With the way it feels? With how boring it is? With the UI?
Then you are at the right place. Below, you will see a list of all ROM’s that are available to your device.
Disclaimer: The ROMs aren't made by me. Also if you install them and you damage your device -- it isn't my responsibility. Flash the ROMs at your own risk!
If you find other ones, please link them down below so I can add them here. Thanks.
1. [ROM][7.1.1][A3F][A3H][A3M] LineageOS 14.1 Unofficial for Samsung Galaxy A3 (Thanks to @vl_w)
xda-site: https://forum.xda-developers.com/sam...msung-t3532574
androidfilehost: https://www.androidfilehost.com/?fid=673368273298957661
Compatibility: SM-A300F, SM-A300H, SM-A300M and SM-A300FU
2.[ROM][6.0.1][DISCONTINUED] CyanogenMod 13.0 Unofficial for Samsung Galaxy A3 (Thanks to @mygalaxya)
xda-site: https://forum.xda-developers.com/sam...msung-t3326297
androidfilehost: https://www.androidfilehost.com/?fid=457095661767110337
Compatibility: A300FU
3.[ROM][5.1.1][A3F][A3H][A3M] AOSP 5.1.1 for GALAXY A3 (Thanks to @mygalaxya)
xda-site: https://forum.xda-developers.com/sam...osp-5-t3293984
androidfilehost: https://www.androidfilehost.com/?fid=24411628330024981
Compatibility: A300F, A300H and A300M
4. [ROM][A300FU][TW-6.0.1] Grace UX ROM for Galaxy A3 2015 (Thanks to @xxpr0T0TYPEXx)
xda-site: https://forum.xda-developers.com/sam...-2015-t3655954
androidfilehost: https://www.androidfilehost.com/?fid=673791459329056874
Compatibility: SM-A300FU
5. lineage-14.1-GalaxyA3_PixelEdition_UNOFFICIAL_a3ltexx_a3ultexx_ a33gxx.zip (Thanks to @Deno_developer)
xda-site: -
androidfilehost: https://androidfilehost.com/?w=files&flid=228755
Compatibility: - (unsure)
6. MIUI8-17092017-01:40-vlw-a3lte.zip (Thanks to @vl_w)
xda-site: -
androidfilehost: https://androidfilehost.com/?fid=961840155545596334
Compatibility: - (unsure)
7. Resurrection Remix-N (Thanks to @hassan_Sardar)
xda-site: - (I didn't found any)
androidfilehost: https://androidfilehost.com/?w=files&flid=218736
Compatibility: A300F/H/Y
Attention: Latest versions won't boot, so use 20170926 versions. (Mentioned by @g0didit)
8. LineageOS 15.1 Unofficial for Samsung Galaxy A3 (2015) (Thanks to @vl_w)
xda-site: https://forum.xda-developers.com/sam...6#post76579586
download: On xda-site
Compatibility: SM-A300F, SM-A300H, SM-A300M, SM-A300FU, SM-A300G, SM-A300Y, SM-A300YX
9. [ROM][A300FU/Y][TW-7.1.1][v3.0] SEP 8.5, a Galaxy A8 (2018) ROM (Thanks to @xxpr0T0TYPEXx)
xda-site: https://forum.xda-developers.com/sam...8-rom-t3754851
download: On xda-site
Compatibility: A300FU and A300Y
10. Lineage 16.0 (Thanks to @vl_w)
xda-site: -
download: Depends on your device, link the devices: https://androidfilehost.com/?fid=11410963190603856307, https://androidfilehost.com/?fid=11410963190603856313, https://androidfilehost.com/?fid=11410963190603856319
Compatibility: A300F/H/Y
11. Lineage 17.0 (Thanks to @vl_w)
Xda-site: -
Download:: https://androidfilehost.com/?w=files&flid=315246
Compatibility: -
12. LineageOS 17.1 Unofficial for Samsung Galaxy A3 (2015) (Thanks to @Ud4ba)
Xda-site: https://forum.xda-developers.com/t/...nofficial-for-samsung-galaxy-a3-2015.4249375/
Download:: https://drive.google.com/file/d/1OHDyqsyHCgc_fySisZQ-DEZWnF4It297/view
Compatibility: SM-A300F* SM-A300H* SM-A300M* SM-A300FU* SM-A300G* SM-A300Y SM-A300YX*
Some other ROMs:
CyanogenMod 12: https://forum.xda-developers.com/sam...xy-a3-t3273323
Resurrection-Remix: https://androidfilehost.com/?fid=24343351889232218
For the Google apps: http://opengapps.org/
TWRP: https://play.google.com/store/apps/d....twrpapp&hl=en
How to: https://forum.xda-developers.com/sam...ng-a3-t3582233
(How to install TWRP: http://www.xda-developers.com/how-to-install-twrp)
Steps for a Clean Install:
0. See if your phone is compatible with the version
1. Put the .zip file in Internal or External Storage.
2. Reboot in Recovery Mode (Using TWRP/CWM Recovery)
3. Wipe Data, Cache, Dalvik Cache, and format /System
4. Install the ROM
5. Flash the Google Apps
6. Reboot
7. Enjoy
Other sides to check out: https://forum.xda-developers.com/sam...a300y-t3494362
(Thanks to @Jonny_Hood)
Thanks
Thanks for that, helped me
Great to hear!
Nice all together and a nice tutorial (add some updates aka battery problem workaround NFC ON,etc)... anyway well done :victory:....i love the idea :good:... keep the good work :fingers-crossed:
P.s. add link to latest TWRP
Sent from my SM-A300FU using XDA Labs
On this link u got more ROM's from vl_w ....
vl_w's Developer Profile
Another set of ROM's - Resurrection Remix for A3 2015 from @Has.007
https://androidfilehost.com/?w=files&flid=218736
Latest versions wont boot, so use 20170926 versions.
@Falaysia Ask a moderator to move your thread to Galaxy A3 General section. This isn't the right place for this thread and no one would even know.
Has.007 said:
@Falaysia Ask a moderator to move your thread to Galaxy A3 General section. This isn't the right place for this thread and no one would even know.
Click to expand...
Click to collapse
Hi, did U see logs from latest build?
I installed previous version and using it fot 2 days now...
g0didit said:
Another set of ROM's - Resurrection Remix for A3 2015 from @Has.007
https://androidfilehost.com/?w=files&flid=218736
Latest versions wont boot, so use 20170926 versions.
Click to expand...
Click to collapse
Can you tell me what your model is? A300H?
hanh1506 said:
Can you tell me what your model is? A300H?
Click to expand...
Click to collapse
SM-A300FU, still using RR rom... No errors...
g0didit said:
Another set of ROM's - Resurrection Remix for A3 2015 from @Has.007
https://androidfilehost.com/?w=files&flid=218736
Latest versions wont boot, so use 20170926 versions.
Click to expand...
Click to collapse
g0didit said:
SM-A300FU, still using RR rom... No errors...
Click to expand...
Click to collapse
And 7.0 or 7.1?
hanh1506 said:
And 7.0 or 7.1?
Click to expand...
Click to collapse
7.1.2
Thanks! It work well. But my browser keep showing that it has stopped. How about yours?
hanh1506 said:
Thanks! It work well. But my browser keep showing that it has stopped. How about yours?
Click to expand...
Click to collapse
I use Firefox... I think I unistall Jelly with System app remover, u can find it under Settings, Configuration, Misc.
I dont use Google apps...
g0didit said:
I use Firefox... I think I unistall Jelly with System app remover, u can find it under Settings, Configuration, Misc.
I dont use Google apps...
Click to expand...
Click to collapse
Yes, but for me, it's light and fast I'm using Chrome Beta now.
hanh1506 said:
Yes, but for me, it's light and fast I'm using Chrome Beta now.
Click to expand...
Click to collapse
Try Firefox Nightly! (That one I use)
New ROM... A300-FU only !!!!
[ROM][A300FU][TW-7.1.1] SEP 8.5, a Galaxy A8 (2018) ROM by xXPR0T0TYPEXx
Thanks!!!!
Thanks!!!! That's what I needed.
Your welcome
Cat_12345 said:
Thanks!!!! That's what I needed.
Click to expand...
Click to collapse
Don't say it, do it. (Press the thanks button)
Hi, Oreo released today -> [ROM][8.1.0][A3F/H/FU/G/M/Y] LineageOS 15.1 Unofficial for Samsung Galaxy A3 (2015)
and i added your thread to the [How to] Root, TWRP, Flash A300FU / A300Y Noob friendly guide thread at Custom ROMs section
View attachment 4988743​About
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Release Notes：
* Fix selinux issues during formatting - dianlujitao
* Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
* Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
* Add option to uninstall TWRP app from /system - Dees_Troy
* Create digest for subpartitions - bigbiff
Download
Link
INSTALLATION:
0. Backup your ROM
1. Download the OrangeFox zip file to your device
2. Use command or recovery img mode to install
command:fastboot flash recovery recovery.img
Contributors
Me(Remin7)
Chippa-a
Source Code:https://github.com/Remim7/TWRP_device_sony_suzu
TWRP Source Code: https://github.com/minimal-manifest-twrp
Credits
* TeamWin Recovery Project
Version Information
Status: Stable
Stable Version: 3.3.1-0
Base on: android-9.0
Created 2020-04-07
Uhm, why you share a unofficial TWRP build when our Official TWRP still be maintained ?
TheMalachite said:
Uhm, why you share a unofficial TWRP build when our Official TWRP still be maintained ?
Click to expand...
Click to collapse
Modding
TheMalachite said:
Uhm, why you share a unofficial TWRP build when our Official TWRP still be maintained ?
Click to expand...
Click to collapse
Because the TWRP I built is based on android-9.0, and the official TWRP is based on android-8.1, the TWRP I built can interpret the hardware encryption of pie or Q, and the official TWRP seems to have compatibility issues.
Hello
can gsi rom be used on redmi note 10?
How can I install it if it is available?
Yes. You need to unlock bootloader first
Saeless said:
Yes. You need to unlock bootloader first
Click to expand...
Click to collapse
whats the procedure i have unlocked bootloader
was able to flash Android 12 Gsi successfully.. But couldn't Boot system.
Only gsi arm64 Android 12 worked though.
You can check any instructions on Google because Gsi has one way for all devices. but it's on your own risk.
Sorry for being off topic but what's the difference between the custom roms made specifcally for the device and the gsi roms?
Samir2298 said:
Sorry for being off topic but what's the difference between the custom roms made specifcally for the device and the gsi roms?
Click to expand...
Click to collapse
1> Custom ROMs are more Optimized for the devices they are published for. Also, they usually have more features and upgradations while GSI (Generic system Image) is better than plain simple vanilla AOSP (Android Open Source Project) in most cases and are supposed to have a higher chance of adapting for installation on any supportive (ARM architechture etc.) device.
2> Custom ROMs are usually larger in size (1Gb/2gb etc. ) while GSIs are usually smaller in size
( 500Mb/700Mb etc.)
greendrink said:
Hello
can gsi rom be used on redmi note 10?
How can I install it if it is available?
Click to expand...
Click to collapse
OctaviOS GSI (GSI Arm64-ab) booted on my Redmi note 10 but Lineage 18.1 is way better as per my opinion, you have to flash Gapps though.
P.S.- I'm still waiting for some more vanilla ROMs OR GSIs to be made for this device butfrom what I know the developer communities seem to be more in favor of making Rom/Gsi (OR Ports) for the PRO versions of Redmi Note series directly, so some of the lower devices not getting enough attention.
OldNoobOne said:
OctaviOS GSI (GSI Arm64-ab) booted on my Redmi note 10 but Lineage 18.1 is way better as per my opinion, you have to flash Gapps though.
P.S.- I'm still waiting for some more vanilla ROMs OR GSIs to be made for this device butfrom what I know the developer communities seem to be more in favor of making Rom/Gsi (OR Ports) for the PRO versions of Redmi Note series directly, so some of the lower devices not getting enough attention.
Click to expand...
Click to collapse
Is it 11 or 12. Can i have a link to download please
Saeless said:
Is it 11 or 12. Can i have a link to download please
Click to expand...
Click to collapse
11.
It is there on internet or try this link -->
( https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list? )
Welcome to Quantic a Kernel built specially for Xiaomi Mi 11 Lite 5G codename: renoir
One of the most used kernel on Custom ROMS on Xiaomi Mi 9, Redmi K20 Pro, POCO F2 Pro, Mi 10T Pro, POCO F3, Galaxy Tab s7, chosen by developers , built from scratch with latest odin-r-oss source provided by Xiaomi MiCode team​
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible with Android 11, Android 12/12.1, not tested on MIUI*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it (See details below)
FEATURES
Reduced logging events
Performance Improvements on scheduler
Optimized memory allocations
Reduced kernel weight
Optimized CAF CPU BOOST with my personal tweaks using Sultan's kthread affine API's
FIX CPU Capacity issues
Devfreq boost enabled and aligned with CAF sched_boost powerhal. Enjoy lag free UI experience with no frame drops.
Upstreamed to latest ACK v5.4.203 from A11 branch
Upstreamed to LA.UM.9.14.r1-19600-LAHAINA.QSSI13.0
Systemless kernel support currently on beta stage
Fixed dts derps commited by xiaomi
Removed lag UI when low battery
IMPORTANT NOTICE: This kernel tries to follow GKI scheme from google now QGKI thanks to QCOM, so flasheable zip comes with .ko modules that are pushed to /vendor/lib/modules, this means the kernel is not systemless as previous devices, like kona or msmnile platfroms. Fash at your own risk
INSTALLATION PROCEDURE
Make sure you are on any AOSP Recovery
Boot to recovery and go to apply update
Apply update from ADB
adb sideload Quantic.zip
Go back and reboot system
BUGS:
Fast Charge on some devices
DOWNLOAD HERE
https://github.com/Official-Ayrton990/android_kernel_xiaomi_renoir/releases/tag/r1.2.1
TELEGRAM CONTACT
https://t.me/AyrtonChat <-- Discussion group for support
Thanks List
To kdrag0n
To Kerneltoast
To ghostrider reborn @adithya-r
To Kazuki H @Kaz205
To Roxirp for testing
XDA:DevDB Information
Quantic Kernel for Xiaomi Mi 11 Lite 5G (renoir)
Contributors
Ayrton990
Source Code: Github from Ayrton990
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 20220703-1546-c2322996
Beta Release Date: 2022-07-03
Created 2022-07-03
Last Updated 2022-07-24
Update for 20220724-2342-77dbf920
Code:
HEAD: 3a9b36c490bda5723b4862039852a49f9892c94a
Changelog:
- Fixed fast charging
- Added dimlayer based DC-Dimming
- Fixed devfreq_boost stuck at max for some time
- Fine tune for performance
Support only for roms using A11 blobs (Not compatible with latest PE update).
MIUI is untested so not supported, flash at our own risk
Download: https://github.com/Official-Ayrton990/android_kernel_xiaomi_renoir/releases/tag/r1.2.1
Reserved 2
Ayrton990 said:
Welcome to Quantic a Kernel built specially for Xiaomi Mi 11 Lite 5G codename: renoir
One of the most used kernel on Custom ROMS on Xiaomi Mi 9, Redmi K20 Pro, POCO F2 Pro, Mi 10T Pro, POCO F3, Galaxy Tab s7, chosen by developers , built from scratch with latest odin-r-oss source provided by Xiaomi MiCode team​
Click to expand...
Click to collapse
Hi, many thanks for the work....
do you know if it's possible to flash this kernel on GSI?????
I will try it on pixel experience 12 plus and share details thx
rayman95 said:
Hi, many thanks for the work....
do you know if it's possible to flash this kernel on GSI?????
Click to expand...
Click to collapse
since it's miui base i don't think so, but if you try please share your feedback.
Attempted to flash on MIUI 12.5.9 didn't booted neither got into recovery. Backup your vendor_boot.img to flash back in case of messing up something.
good job.
Did someone tried on GSI rom?
Hi, I'm assuming you use this kernel in your latest Descendant build? I've been using MIUI for almost a year now and still miss the feel of a close to AOSP build. If I can find the time to reset all of the 2FA accounts I'll for sure give Descendant a try!
Descendant rom in use Quantic Kernel [5.4.203] Boot failure with installation
Booting after factory reset successful
Not completed during initial setup
13eauty said:
I will try it on pixel experience 12 plus and share details thx
Click to expand...
Click to collapse
Was it successful flashing it, and does it work on pixel?
razor_1911 said:
Was it successful flashing it, and does it work on pixel?
Click to expand...
Click to collapse
It won't work on latest PE
Ayrton990 said:
It won't work on latest PE
Click to expand...
Click to collapse
Will there be an update for the lastest version?
razor_1911 said:
Will there be an update for the lastest version?
Click to expand...
Click to collapse
Seconded
Message from the dev on telegram...
Xiaomi Mi 11 Lite 5G projects are stopped permanently. My device got bricked by unknown reason, and I will try to send to service to see if something can be done.
latest build with fingerprint bugs fixed is on 20220808
rayman95 said:
Message from the dev on telegram...
Xiaomi Mi 11 Lite 5G projects are stopped permanently. My device got bricked by unknown reason, and I will try to send to service to see if something can be done.
latest build with fingerprint bugs fixed is on 20220808
Click to expand...
Click to collapse
I saw that message on telegram. He was last person doing something for this phone after Patryk abandoned making PE. I hope service will fix his device and he will be back.
Hello does someone know if this kernel works with gsi roms?
sutysut said:
I saw that message on telegram. He was last person doing something for this phone after Patryk abandoned making PE. I hope service will fix his device and he will be back.
Click to expand...
Click to collapse
There is still a ROM for the Renoir, CorvusOS.
I just installed it, for the moment no problem. It is close to the PE ROM I think.
Thoiareg said:
There is still a ROM for the Renoir, CorvusOS.
I just installed it, for the moment no problem. It is close to the PE ROM I think.
Click to expand...
Click to collapse
Where did you find it? Maybe it's a gsi rom