Related
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Some personal thoughts:
- you should read everything from top to bottom of this first page at least - i won't offer support for any issues that were already mentioned;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick), via paypal, if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Initial notes:
ONLY G950F / G950FD / G955F / G955FD / N950F / N950FD VARIANTS ARE SUPPORTED.
1. Don't forget to check bugs before any kind of questions
2. Since most of the GSIs are AOSP, forget about VoLTE, Knox features, Samsung apps, spen features, Camera mods or features, Iris or other Samsung related features.
3. The GCam we use in OneUI also doesn't work, i know, don't spam with "fix pls".
4. On Note 8 only one camera works, i want and i would like to fix that too, but i can't promise anything.
5. You can use any non-treble rom even if you have treble vendor installed, as long as you flash a non-treble kernel. The rom will ignore your vendor and everything will be as non treble.
* To go back to treble just flash vendor/treble kernel and the desired GSI.
* For the cases when you flashed back official twrp or reverted to normal - follow again all the "how to" steps, from below.
6. Not many kernels support treble now, don't try to flash/boot with others unless they specifically mention the kernel supports treble or you will drastically fail.
If any kernel dev wants to support this project feel free to reach me to provide some critical (ramdisk) patches.
General features:
- based on G965FXXU5CSGD August release
- Note8 files from N950FXXS7DSH1 - August release
- S8(+) files from G95*FXXS5DSH5 - August release
- Aroma vendor zip with selection of some things
- latest hadesKernel included with most of the features of OneUI kernel + other patches
- misc things enabled in framework overlay for better experience
- will update when i will remember
What works:
- everything else that's not listed under the bugs
General bugs:
- no signal bars shown (signal is fine tho) starting with mid-august builds signal bars are working
- fingerprint gestures
- touchscreen dies after a while with AOD/Ambient display always on (fixable with spamming power button 2-3 times)
How to convert to treble layout:
! make sure you are on latest official TWRP for your device (links in #2 post)
1) Download a PIE GSI from here, use ARM64, A only
2) Put GSI in internal storage
3) Reboot to recovery
4) Flash treble-convert zip
5) Reboot recovery
6) Flash downloaded GSI as image-system image
7) Reboot recovery
8) Flash treble-pie-vendor zip
9) Optional flash Magisk > 19.3
How to revert treble layout:
1) Reboot to recovery
2) Flash treble-revert zip
3) Reboot recovery
4) Wipe CACHE in twrp wipe menu
5) Flash any non treble rom or restore your previous twrp backup
Credits
@ananjaser1211
@prashantp01
@Noxxxious
@SuperR.
@jesec
@dron985
@phhusson
@ivanmeler
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
Project hadesTreble, Tool/Utility for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
corsicanu
Source Code: https://github.com/corsicanu/android_kernel_samsung_universal8895/tree/treble
Version Information
Status: Beta
Current Beta Version: v0.4
Beta Release Date: 2019-09-03
Created 2019-07-31
Last Updated 2019-09-19
Reserved
Download links:
v0.4-treble-pie-vendor
v0.3-treble-pie-vendor
v0.2-treble-pie-vendor
v0.1-treble-pie-vendor
MEGA folder
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
Latest Magisk stable or test/beta
O/P Bootloaders and modems
Reserved
You can find GSIs here , use ARM64, A only
Working GSIs and their bugs:
- phh AOSP - bootable, only general bugs
- phh Resurrection Remix - bootable, only general bugs
- EnesSastim AospExtended - bootable, only general bugs
- EnesSastim Pixel Experience Plus - bootable, only general bugs
- EnesSastim HavocOS - bootable, only general bugs
- peaktogoo Evolution X - bootable, only general bugs
- parags Evolution X - bootable, only general bugs
- ExpressLuke Evolution X - bootable, only general bugs (ril and brightness fixed)
- ExpressLuke HavocOS - bootable, only general bugs
- Vince31fr HavocOS 11.08.2019 - bootable, gapps needed, only general bugs
- ErfanGSI DirtyUnicorns - bootable, general bugs + advanced settings FC, stock cam crash, no account can be added
- Yey59 nitrOS - bootable, general bugs + stock camera crashing
- NFound DotOS (2019-04-09) - bootable, only general bugs
- Technical Bootleggers (2019-06-07) - bootable, only general bugs
- ErfanGSI MIUI Pie (2019-05-29) - bootable, brightness + general bugs + #miuifix
- king1990 Bliss (2019-04-05) - bootable, brightness + general bugs
- sixohtew OmniROM (2019-07-15) - bootable + general bugs
- Dil3mm4 Descendant (2019-07-10) - bootable + general bugs
- ErfanGSI Pixel Q beta 5 - bootable, general bugs + wifi (setup fails too because of this), fingerprint, storage, brightness slider, sdcard, low sound, bluetooth calls
- OxygenOS-Aonly-9-20190826-ErfanGSI - bootable after deleting "overlay" folder from /vendor, gms update needed, ril works, bugs: brightness, bt audio, face unlock, smart lock
- MIUI-9-20190831, bootable, general bugs + PlayStore and GMS update needed, BT don't pair, MI account, possible 2-3 reboots,
Not working GSIs and their bugs:
- ErfanGSI FlymeOs (2019-07-02) - not booting, black screen after bootsplash
- ErfanGSI ColorOS (2019-06-05) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-07-01) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-06-02/06) - not booting, stays at bootanimation
- ErfanGSI POSP (2019-05-30) - not booting, infinity reboots at bootsplash
- ErfanGSI Nubia (2019-06-05) - not booting, stays on bootanimation
- OnePlus7Pro5G (2019-07-06) - not booting, stays on bootanimation
- MacTavish ColorOS (2019-03-23) - not booting, stays on bootanimation
- ErfanGSI ZUI (2019-06-17) - bootable(?), black screen
- ErfanGSI OxygenOS Q (2019-07-29) - bootable(?), SystemUI crashes
- MIMAX3Global (20190802) Pie - booting, reboots every 3sec
- OnePlus7Hydrogen (20190725) - booting, SysUi crashing every 3sec
- OnePlus6THydrogen (20190807) - not booting
- OxygenOS 10 (20190808) Erfan - booting, black screen
Others might work too, test and report and i will update the list.
I strongly recommend using PIE built from source gsis, oem ported images might not boot at all or be filled with other bugs, i won't care of those, remember you are on Samsung, Exynos, on a ported vendor, if you want real/better treble, move to any other device/soc.
As for Q, ErfanGSI Pixel Q beta 5, but it has tons of unfixable bugs right now, flash at your own risk or wait for Q source to drop in order to become patch'able.
Special thanks for testing and contributing on updating the list to @ZcoderDEV, @AndrzejDwo, Pócs Márk, Shayan, @snikerfreak @Soydere and many other users, this place is too small to mention everyone.
FAQ (for later)
Great work as always corsi. this is big
Good job Mate
That is very big step. Thank you for your works.
Amazing alpha port
Thank you @corsicanu for your amazing work You're the best dev for the 8895 family :victory:
Now it's time to break the ice :
- Following your instructions, I was able to boot GSI in about five minutes.
- I chose to install Evolution X GSI (download link : https://sourceforge.net/projects/evolution-x/files/GSI), don't forget to choose A ONLY !
- When you reboot to boot for the first time, it's possible that your Note will reboot itself several times (for me it was 3 times, and it isn't a bootloop if you follow the OP installation).
- Every reboot you will be getting prompt saying you're having an internal problem with your device, don't worry it isn't the case.
- I experienced all the bugs you've mentionned. And don't let the battery discharge completly because you won't be able to charge it again in "offline mode" (thus I wonder if wireless charging will work in this mod but i don't have one to test unfortunately).
- Bluetooth isn't working, only the switcher in settings is. And in QP if you turn it on it will turn off 10 sec later. In settings there is a mention that your device isn't able to detect anthing around.
- NFC isn't working either. Everything seems to be fine (won't switch off by itself) but can't share something via Android Beam (Galaxy Note 3).
- Dual Boot Patcher isn't working, will end up in bootloop.
If you need help for testing just tell me
Once again, amazing job and well done :highfive:
Alek7 said:
Thank you @corsicanu for your amazing work You're the best dev for the 8895 family :victory:
Now it's time to break the ice :
- Following your instructions, I was able to boot GSI in about five minutes.
- I chose to install Evolution X GSI (download link : https://sourceforge.net/projects/evolution-x/files/GSI), don't forget to choose A ONLY !
- When you reboot to boot for the first time, it's possible that your Note will reboot itself several times (for me it was 3 times, and it isn't a bootloop if you follow the OP installation).
- Every reboot you will be getting prompt saying you're having an internal problem with your device, don't worry it isn't the case.
- I experienced all the bugs you've mentionned. And don't let the battery discharge completly because you won't be able to charge it again in "offline mode" (thus I wonder if wireless charging will work in this mod but i don't have one to test unfortunately).
- Bluetooth isn't working, only the switcher in settings is. And in QP if you turn it on it will turn off 10 sec later. In settings there is a mention that your device isn't able to detect anthing around.
- NFC isn't working either. Everything seems to be fine (won't switch off by itself) but can't share something via Android Beam (Galaxy Note 3).
- Dual Boot Patcher isn't working, will end up in bootloop.
If you need help for testing just tell me
Once again, amazing job and well done :highfive:
Click to expand...
Click to collapse
Nice and complete feedback, thanks for it.
However, try to reflash vendor, i used bluetooth on Evo X with car bluetooth for media and for calls so i can confirm it works. As for nfc, it worked for me as i use my phone to pay for things.
Sent from my SM-N950F using Tapatalk
v0.2 is up
Changelog:
fixed autobrightness thanks to @dron985
added gpu driver apps
How to install:
if you are already on a GSI and have v0.1 flashed, flash only vendor as a normal zip, (optional - flash Magisk > 19.3)
coming from any other setup - check first post install instructions.
Download:
Mega
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
O/P Bootloaders and modems
Personal notes:
If you are new here, make sure you read everything from first page before messing with your phone.
Make sure you backup everything before flashing, things might not work as expected.
Regards!
ananjaser1211 said:
Great work as always corsi. this is big
Click to expand...
Click to collapse
You know you've done an good job when Anan himself drops by! This is big indeed! Thanks Corsi
Reflashed my Note with Odin and installed everything again with vendor v0.2, now Bluetooth and NFC are working properly
When installing or flashing the GSI as zip, an error message comes or do I need to unpack the file beforehand?
Shogunes said:
When installing or flashing the GSI as zip, an error message comes or do I need to unpack the file beforehand?
Click to expand...
Click to collapse
Unpack and flash image as system image.
Sent from my SM-N950F using Tapatalk
Following all the steps I installed RR image, the first time it stayed in the boot, then try again doing a format data and voila! Excellent Bluetooth connection with the car, camera OK and I almost feel no bugs. I do not know if it will be basic but just in case, the image is installed in System and do not forget to download Gapps ... Thank you very much.
Installed pixel experience gsi, works great, haven't experienced any new bugs yet.
Camera is ok.
GOD OF HADES!!! TRUE AND THE ONLY!!!
How many sleepless nights it had costed since first attempt 10 months ago, probably only Your Wife knows ? But as many @Eliteteam members' projects, which we know from the past (big KISS to @ananjaser1211 ?), also this one - EFFECTS ARE THE MOST IMPORTANT, time is not even a minor thing.
Big CONGRATS to You, smaller for the testers ? (but truly deserved) and the biggest THERE U GO for All that didn't have enough patience and FAITH.
Keep Exy8895 alive as long as possible (tho Ur new toy is already on the desk)!
Pls delete
I had already tried rr,nitrOs,nitrogen os,Havoc os,,octopus,dot os ,only rr, nitr n havoc can boot n just some bags.
Is there a way to install the beta of the Pixel with Android Q?
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Some personal thoughts:
- you should read everything from top to bottom of this first page at least - i won't offer support for any issues that were already mentioned;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick), via paypal, if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Initial notes:
ONLY G950F / G950FD / G955F / G955FD / N950F / N950FD VARIANTS ARE SUPPORTED.
1. Don't forget to check bugs before any kind of questions
2. Since most of the GSIs are AOSP, forget about VoLTE, Knox features, Samsung apps, spen features, Camera mods or features, Iris or other Samsung related features.
3. The GCam we use in OneUI also doesn't work, i know, don't spam with "fix pls".
4. On Note 8 only one camera works, i want and i would like to fix that too, but i can't promise anything.
5. You can use any non-treble rom even if you have treble vendor installed, as long as you flash a non-treble kernel. The rom will ignore your vendor and everything will be as non treble.
* To go back to treble just flash vendor/treble kernel and the desired GSI.
* For the cases when you flashed back official twrp or reverted to normal - follow again all the "how to" steps, from below.
6. Not many kernels support treble now, don't try to flash/boot with others unless they specifically mention the kernel supports treble or you will drastically fail.
If any kernel dev wants to support this project feel free to reach me to provide some critical (ramdisk) patches.
General features:
- based on G965FXXU5CSGD August release
- Note8 files from N950FXXS7DSH1 - August release
- S8(+) files from G95*FXXS5DSH5 - August release
- Aroma vendor zip with selection of some things
- latest hadesKernel included with most of the features of OneUI kernel + other patches
- misc things enabled in framework overlay for better experience
- will update when i will remember
What works:
- everything else that's not listed under the bugs
General bugs:
- no signal bars shown (signal is fine tho) starting with mid-august builds signal bars are working
- fingerprint gestures
- touchscreen dies after a while with AOD/Ambient display always on (fixable with spamming power button 2-3 times)
How to convert to treble layout:
! make sure you are on latest official TWRP for your device (links in #2 post)
1) Download a PIE GSI from here, use ARM64, A only
2) Put GSI in internal storage
3) Reboot to recovery
4) Flash treble-convert zip
5) Reboot recovery
6) Flash downloaded GSI as image-system image
7) Reboot recovery
8) Flash treble-pie-vendor zip
9) Optional flash Magisk > 19.3
How to revert treble layout:
1) Reboot to recovery
2) Flash treble-revert zip
3) Reboot recovery
4) Wipe CACHE in twrp wipe menu
5) Flash any non treble rom or restore your previous twrp backup
Credits
@ananjaser1211
@prashantp01
@Noxxxious
@SuperR.
@jesec
@dron985
@phhusson
@ivanmeler
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
Project hadesTreble, Tool/Utility for the Samsung Galaxy S8
Contributors
corsicanu
Source Code: https://github.com/corsicanu/android_kernel_samsung_universal8895/tree/treble
Version Information
Status: Beta
Current Beta Version: v0.4
Beta Release Date: 2019-09-03
Created 2019-07-31
Last Updated 2019-09-19
Reserved
Download links:
v0.4-treble-pie-vendor
v0.3-treble-pie-vendor
v0.2-treble-pie-vendor
v0.1-treble-pie-vendor
MEGA folder
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
Latest Magisk stable or test/beta
O/P Bootloaders and modems
Reserved
You can find GSIs here , use ARM64, A only
Working GSIs and their bugs:
- phh AOSP - bootable, only general bugs
- phh Resurrection Remix - bootable, only general bugs
- EnesSastim AospExtended - bootable, only general bugs
- EnesSastim Pixel Experience Plus - bootable, only general bugs
- EnesSastim HavocOS - bootable, only general bugs
- peaktogoo Evolution X - bootable, only general bugs
- parags Evolution X - bootable, only general bugs
- ExpressLuke Evolution X - bootable, only general bugs (ril and brightness fixed)
- ExpressLuke HavocOS - bootable, only general bugs
- Vince31fr HavocOS 11.08.2019 - bootable, gapps needed, only general bugs
- ErfanGSI DirtyUnicorns - bootable, general bugs + advanced settings FC, stock cam crash, no account can be added
- Yey59 nitrOS - bootable, general bugs + stock camera crashing
- NFound DotOS (2019-04-09) - bootable, only general bugs
- Technical Bootleggers (2019-06-07) - bootable, only general bugs
- ErfanGSI MIUI Pie (2019-05-29) - bootable, brightness + general bugs + #miuifix
- king1990 Bliss (2019-04-05) - bootable, brightness + general bugs
- sixohtew OmniROM (2019-07-15) - bootable + general bugs
- Dil3mm4 Descendant (2019-07-10) - bootable + general bugs
- ErfanGSI Pixel Q beta 5 - bootable, general bugs + wifi (setup fails too because of this), fingerprint, storage, brightness slider, sdcard, low sound, bluetooth calls
- OxygenOS-Aonly-9-20190826-ErfanGSI - bootable after deleting "overlay" folder from /vendor, gms update needed, ril works, bugs: brightness, bt audio, face unlock, smart lock
- MIUI-9-20190831, bootable, general bugs + PlayStore and GMS update needed, BT don't pair, MI account, possible 2-3 reboots,
Not working GSIs and their bugs:
- ErfanGSI FlymeOs (2019-07-02) - not booting, black screen after bootsplash
- ErfanGSI ColorOS (2019-06-05) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-07-01) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-06-02/06) - not booting, stays at bootanimation
- ErfanGSI POSP (2019-05-30) - not booting, infinity reboots at bootsplash
- ErfanGSI Nubia (2019-06-05) - not booting, stays on bootanimation
- OnePlus7Pro5G (2019-07-06) - not booting, stays on bootanimation
- MacTavish ColorOS (2019-03-23) - not booting, stays on bootanimation
- ErfanGSI ZUI (2019-06-17) - bootable(?), black screen
- ErfanGSI OxygenOS Q (2019-07-29) - bootable(?), SystemUI crashes
- MIMAX3Global (20190802) Pie - booting, reboots every 3sec
- OnePlus7Hydrogen (20190725) - booting, SysUi crashing every 3sec
- OnePlus6THydrogen (20190807) - not booting
- OxygenOS 10 (20190808) Erfan - booting, black screen
Others might work too, test and report and i will update the list.
I strongly recommend using PIE built from source gsis, oem ported images might not boot at all or be filled with other bugs, i won't care of those, remember you are on Samsung, Exynos, on a ported vendor, if you want real/better treble, move to any other device/soc.
As for Q, ErfanGSI Pixel Q beta 5, but it has tons of unfixable bugs right now, flash at your own risk or wait for Q source to drop in order to become patch'able.
Special thanks for testing and contributing on updating the list to @ZcoderDEV, @AndrzejDwo, Pócs Márk, Shayan, @snikerfreak @Soydere and many other users, this place is too small to mention everyone.
FAQ (for later)
This is just the best thing that happen to our S8!!!
You are a genius!!! Forgot to root but I'll go ahead and do that just now, Evolution X flashed!
Bluetooth working great with my headset, wifi perfect, data connection perfect, so far nothing major to report but its clearly state that bugs or whatever belong to the thread of the rom flashed by anyone.
Nice!!!!! ?
Few of my favorite quotes:
Code:
[I]"fake
you will never have any proper treble on s8 lmao
not oem treble = fake treble = ****ing useless
waste of time" [/I] - [B]A[/B]ndroid[B]C[/B]losed[B]S[/B]ource[B]P[/B]roject dev
Goodjob on finally releasing it. Looks like the best thing that has happened to S8 besides my kernel :victory:
Thanks for this and keep up the good work
Man this is such good news for this Phone, this open a whole new world for ROMS and such, really thanks OP for doing this!
Screenshots please?
Thank you so much for this !!! Best thing that have ever happened!!
mrjoy said:
Screenshots please?
Click to expand...
Click to collapse
the post #5 have screenshots
What the ****?
How can you be so good?
You were a genius with Hades Rom that was my main rom.
Now you're a LEGEND.
Bless your heart and soul man.
Have a great Life.
GENTLEMEN..... that's a big victory...
i am stuck at Galaxy S8 screen, did everything as mentioned... i even updated TWRP to latest official 3.3.1 and updated modem and boot loader to G950FXXU4DSE4 , any help will be appreicated
kariem9495 said:
i am stuck at Galaxy S8 screen, did everything as mentioned... i even updated TWRP to latest official 3.3.1 and updated modem and boot loader to G950FXXU4DSE4 , any help will be appreicated
Click to expand...
Click to collapse
Reflash convert zip and vendor zip.
Sent from my SM-N950F using Tapatalk
How to install?
Edit - when I try to install the GSI my TWRP doesn't recognize the img file, what I have to do to solve it? Any help will be very grateful! Cheers guys! :laugh:
LU SONEVESSO said:
How to install?
Edit - when I try to install the GSI my TWRP doesn't recognize the img file, what I have to do to solve it? Any help will be very grateful! Cheers guys! :laugh:
Click to expand...
Click to collapse
Tap on install image so the .img files show which is the extension of the image system you're looking for
---------- Post added at 07:22 AM ---------- Previous post was at 07:17 AM ----------
A fast review of this project :
1- this project is 99.5% complete.
2- No major bugs, only general bugs that are mentioned in the post and they aren't really that important to be honest.
3-Make sure you follow the installation steps by the letter, and make sure you're downloading the right system image for our device.
4-If you get no sim card after rebooting, do a "soft reebot" , normal rebooting didn't fix the problem for me.
5-Battery life is perfect, i feel it is even better than OneUI.
kariem9495 said:
A fast review of this project :
1- this project is 99.5% complete.
2- No major bugs, only general bugs that are mentioned in the post and they aren't really that important to be honest.
3-Make sure you follow the installation steps by the letter, and make sure you're downloading the right system image for our device.
4-If you get no sim card after rebooting, do a "soft reebot" , normal rebooting didn't fix the problem for me.
5-Battery life is perfect, i feel it is even better than OneUI.
Click to expand...
Click to collapse
Oh wow that sounds really good, that gives me ton of hope for newer ROMs when Samsung ends supporting the S8/S8+
Holy ****! I never knew I would live this day Anyways:
- phh's ResurrectionRemix works fine, except the brightness is completely dead on that build, I wasn't able to control it via the slider.
- phh's AOSP just stuck at the Samsung logo and rebooting, I tried installing it twice, without any success.
- Evolution X is the perfect one. The very small bug I found (well, for someone maybe a big one) but taking a photo/video in a 3rd party app (Messenger, Facebook, Instagram) is very choppy for me, every second it freezes for a small time. Maybe @corsicanu can say anything about this issue. Everything else (but the known bugs) are working FLAWLESSLY. I LOVE IT.
As I said several times, if someone starts to build the current version of the lineage that I do, I completely close the project.
In May, I closed the port, based on 10 android and now the time to completely close all work on exynos7870. There was only one reason why I didn't do it earlier - I promised to fix the sound during calls in the LTE version. Now all done, I dont have any desire and motivation to do anything for the exynos7870.
This decision is final, I switched now to the work on note pro 12.2 wifi variant, my smart home and think about starting tab s6.
Thanks to everyone who has been with me all these years, I will see you on other projects.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
Lineage Builds
SM-T580
15. 20200815: august security patch: https://drive.google.com/file/d/1m67wMYmMbQOCoNLxalgJ9Pv6T7ruQ2G6/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/1xgvXjydnklYZeVHz6Mumgf7jUAm6oSEz/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1Isqa8WAlghmCGTMSGnKEsfUX9dUicM0n/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1jY2riYpLUJ8EFtOMFSXo9o57_Ijr-qVm/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1hnEUDgcugxBLbhQw5d-q9mU75rierlZX/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi): https://drive.google.com/file/d/1K_K6yfJHmjCNJSR12eAh46-7FhagcT4Z/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1CcX6FnTon8OxM99qbUad9NW6rPrJbUgw/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/18axNa2sq6ekZeADBzTZeXlOOaJ1dg8WN/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi): https://drive.google.com/file/d/1mAAEstZz9sOSCFWZiujaGKv-kkslIEwV/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1R6JDLG-H8bP6eGvex7R2PTYsCbrfQpdu/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/1XsQ5qlP22XBGFQK6o1zKT0GLbVd_WlC7/view?usp=sharing
4. 20191003: https://drive.google.com/file/d/1LpthwW1Lf4fJW0nGwsThnJcZ8ToTKpUf/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1qfKSQhDOI4LkthCpOckJLew0zIAZHo67/view?usp=sharing
2. 20190928: fix charger, home button: https://drive.google.com/file/d/1HBaqEwLux9XjTVgHT3IGMXnrCuJaqgTw/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1z5VCwOX9M8-ckb1Wt75oON6aUjMpx2hT/view?usp=sharing
SM-T585
15. 20200815: august security patch: https://drive.google.com/file/d/1OgIcsnfRRr5bFx5gd1kvKvtb8lELIMQa/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/110Zz5mlotOnDuFAjtuC5vNKa4VU1N0_I/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1-llAbO2lZQ2T1qq743MxXZNtuHp7eAUX/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1l0APlqEK20cgJIGbBzaaekBIJrNFkilr/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1OskSZS28m268HRcTeTqFO_HQKB7NgWky/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi), fix hotspot: https://drive.google.com/file/d/1hbwkqI1jpctUUitA0Zg1a3LPj02KfSTS/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1eb_RdaAw6JSCNb_EsSUsPQnvCqGF_OeF/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/1cewbOdJapapRjBbk1X8k2mv9B5viBPlD/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi), fix hotspot (there is still a bug - you cannot turn on wifi after activating a hotspot? need reboot tablet, but at least hotspot working): https://drive.google.com/file/d/1mqsNknYnJSh5cbml7dQ-xd5m0a-KlyCm/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1ymo05w9m9xukDsfLrZz6iBJMKNgarF4x/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/14jOLZjLPyClboBZ8H3C2O6Dt0kFmXghS/view?usp=sharing
4. 20191003: ril: https://drive.google.com/file/d/18ZPRh19Rao1xRPQ5zI9jz7WfYIdonLZ2/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1H5iinjtP2MBObqE-QWqWP0IMN_rRqK9Y/view?usp=sharing
2. 20190928: fixed charger, home button: https://drive.google.com/file/d/1bog0dKKJ17eXa7vgu9cB0K1U8XWTqBzb/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1Inx1A-6VNqtJJhTO3rmodKL2tiS1x8LH/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Root
Install latest magisk from canary channel (version 20.1+): https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte and https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte and https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL] Lineage 17.0 | Android 10 Q | 64bit, ROM for the Samsung Galaxy Tab A series
Contributors
Valera1978, Valera1978
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Based On: lineage
Version Information
Status: Beta
Created 2019-09-27
Last Updated 2019-09-27
Finally, I finished the first version of the new android q.
Initially I thought it would be an easy walk. But google in the new version made a huge amount of changes. And I spend about weeks to made something working.
I rebuild the config, wrote a library with sensors from scratch, there were big problems with wifi and sound. For the sound, I had to build a 32bit version to get the missing libraries.
hello how r u?
thx for your great works,
i always try your roms and you are the best
please is there any bugs for t585 before i try it?
and can u tell me how can i backup all of my phone with internal storage like norton ghost on windows pc?
can u tell me your telegram channel?
Hi, thanks for your great work.
I have installed and tested. For now this I have found:
- Magisk 19.3 and 19.4 do not work. Do not start the rom after installation.
- The battery percentage cannot be displayed in the status bar.
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
michaeljr10wv said:
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
Click to expand...
Click to collapse
Same here thanks for rom Valera
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
lewmur said:
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
Click to expand...
Click to collapse
I have that fault also with SM-T580 and in the Xiaomi Mi A1. It is a fault of Lineage. Just ignore it.
Clash Royale and Brawl Stars work great. The tablet is very fluid.
Great rom, first custom rome redirects the music via usb to my external dac without
extra app!!! Thanks for your great work Valera1978!
Thanks Valera
It works much smoother than stock and earlier aosp.
In addition to what the colleagues mentioned, it happens to me that in Google Chrome I open two tabs and restart the tablet
On the other hand with Firefox in a quick test of several tabs this did not happen.
Thank you for your spectacular work.
Thanks for the Android 10. Fast rom but some random reboot.
This rom look awsome, i will flash it when i will be able to unlock my tablet with the home button
Reboots
Updated to the 09/28 version. Have a problem with the tablet rebooting. I'm trying to use AZ Recorder to record streams from Tubi TV. Start AZ and then Chrome and try to load the Tubi site and the tablet reboots. Did the same thing on the earlier version.
New version 20190929. Hope random reboots now gone away. Was done set of fixes.
Checking few hrs, no any reboots.
Magisk 19.3 and 19.4 unsupported
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
Yes, checked a bit, magisk modifing init in the boot and somehow corrupt it and then on load init cann't get partitions information from dtb.
And internal su also not finished yet.
My primary phone is xiaomi mi9 - more then month I'm on android q and magisk 19.3 working great here.
I'll back to check magisk soon, I need root too.
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
I thought Android 10 you need the Magisk 19.5, still canary builds so might have some issues.
Github Tree
Zip File
You can give it a try if you want
Thanks, valera. But dont' work accelerator.
Keeps giving random errors on the sm-t580
Thanks for update. Random reboot go away. I found few bug. Accelerator and recent files display issue. Thanks
C A O S 11
< Your warranty is now void! >
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
CAOS 11 (Custom AOSP OS) is a project which based on @phhusson's Treble GSI AOSP 11. I began it because original project have not only pros (stability, speed, support) but also some issues and limitations - pure AOSP code have some bugs / haven't much useful things and it's a hard way pulling it. So i did this fork. System can run with SELinux enforced state, as an original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset
UPDATE VERSION
latest build: 2022.03.21
treble patches: v316
SPL: 5 Mar 2022
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CL1CK HERE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on AOSP Roar (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson
projects: TrebleGSI • BlissROMs • crDroid • PixelExperience • ION • neon-OS • Havoc-OS • LineageOS • Evolution-X • LiquidRemix • ExtendedUI • GrapheneOS • ABC Rom • SyberiaOS • RevengeOS • ProtonAOSP
#include_one
#include_two
Great to this thread comes up... it been long time coming.
Can't wait to see when a CAOS is build on Android 12
eremitein said:
KN0WN BUGS• excluding fixes, the same as on AOSP Quack
Click to expand...
Click to collapse
Guess this should read "the same as on AOSP Roar"
Hi,
I flashed CAOS R 2021.04.19 in my HTC U12 life but DigitalWellbeing tools are not available. Is it only available for pixel devices ?
And I'm unable to transfer files using USB connection? Any suggestions or work around to get it working ?
Thank you.
nsbandara said:
Hi,
I flashed CAOS R 2021.04.19 in my HTC U12 life but DigitalWellbeing tools are not available. Is it only available for pixel devices ?
And I'm unable to transfer files using USB connection? Any suggestions or work around to get it working ?
Thank you.
Click to expand...
Click to collapse
are you flashed gappsed variant? i just added Wellbeing but can't test it now, my device have small system partition and i can't easy flash gappsed build
for MTP try enable file transfer in Developer settings
eremitein said:
are you flashed gappsed variant? i just added Wellbeing but can't test it now, my device have small system partition and i can't easy flash gappsed build
for MTP try enable file transfer in Developer settings
Click to expand...
Click to collapse
Yes, I flashed caos-v305-210419-arm64-agZ. I'm unable to find any settings/app entry for WellBeing.
@eremitein - thanks for your work. The ROM is great and fast.
I have it installed on Xiaomi Poco X3 Pro. There are some problems with sound and screen backlight but both of them can be resolved from Phh treble settings. I have posted solutions in X3 Pro thread.
I have one question - in case I would like to update CAOS in future. Is there any "official" way to do this ? Is it possible at all ? Or clean flash is required every time you post new version ?
nsbandara said:
Yes, I flashed caos-v305-210419-arm64-agZ. I'm unable to find any settings/app entry for WellBeing.
Click to expand...
Click to collapse
sad, but i guess you have same with AOSP
as400l said:
I have one question - in case I would like to update CAOS in future. Is there any "official" way to do this ? Is it possible at all ? Or clean flash is required every time you post new version ?
Click to expand...
Click to collapse
How to update GSI
< only same ROM variants >
• go to TWRP, make wipe Dalvik cache (optionally, but recommended)
• install new GSI img to system (or reboot to fastboot/fastbootd and flash GSI)
• boot to TWRP again, resize System
• reinstall same GApps if used before
note: dirty update is not supports by me, do not send bug reports - if you will have bugs first try clean install
CAOS v306 2021.04.24
download /// changelog
Big fan of this CF. I hope there is a option to update (with further versions) using fastboot/adb. (Without loosing data) My Oukitel WP6 just supports these 2 options .
Balsamderaersche said:
My Oukitel WP6 just supports these 2 options .
Click to expand...
Click to collapse
I have one too, and you can simply flash a new version on top of the old one in fastboot without wiping, works totally fine without loss of data.
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
GroovyG said:
I have one too, and you can simply flash a new version on top of the old one in fastboot without wiping, works totally fine without loss of data.
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
Click to expand...
Click to collapse
So basically just:
fastboot flash system xxx.img
?
Yeah!
And a
fastboot erase cache
never hurts, just to have no junk left in there.
GroovyG said:
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
Click to expand...
Click to collapse
is it 21.04.28 build?
No, that's on 21.04.25, didn't see you had a new one up already again, going to install later today
This is hands down the best ROM I have ever used, huge props to you!
Please help me and give me the download links for ( A705FN im arm64-ab )
I'm confused
Just revived My Axon 7 with Treble and a AOSP 11 GSI from here:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Used Recovery:
[RECOVERY][TREBLE] TWRP 3.2.3-0L v1.3 Labs Mod for the ZTE Axon 7
- T W R P 3.2.3-0L [Labs Mod] - The Swiss Army Knife TWRP Mod for the Axon 7 INTRODUCTION This was a long term project that I have been using for a long time. I created some scripts to make it easier and faster to flash new roms and...
forum.xda-developers.com
Kernel / Vendor Base:
[Project Treble][v1.1][Android PIE + OREO][GSI][A-only]
What is Project Treble: Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and...
forum.xda-developers.com
Used Bootstack & Modem:
- A2017G_OreoModem.zip
- A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
Everything runs well except for Magisk actually. Smoothest expierence i had till now on the Axon 7! Enjoy
PS: If enough People are interested... I would like to share some last Dev Love for the Axon 7! Android 11 GSI Goodies if You want so
Please do share
+1 for some more love what do you have in mind?
Update:
- Small screen/text flickering in apps (During scrolling)
- NFC (Dead)
- Camera (flash outsync)
- Wifi OK
- Bluetooth OK
- GAPPS OK
- Sound (Internal + Speakers + Plug) OK
So far
Something like that in the Attachment but My Axon 7 finally died so i can't continue Sorry Folks...
Just place it in /vendor/overlays (You may replace it with the right name with the Framework Overlay).
This is fantastic, is this a list of what currently doesn't work I assume?
TerrorToetje said:
+1 for some more love what do you have in mind?
Update:
- Small screen/text flickering in apps (During scrolling)
- NFC (Dead)
- Camera (flash outsync)
- Wifi OK
- Bluetooth OK
- GAPPS OK
- Sound (Internal + Speakers + Plug) OK
So far
Click to expand...
Click to collapse
Miustone said:
Something like that in the Attachment but My Axon 7 finally died so i can't continue Sorry Folks...
Just place it in /vendor/overlays (You may replace it with the right name with the Framework Overlay)
Click to expand...
Click to collapse
Overlay is no plus. Instead the phone heats up and burns the battery.
But I started from scratch with some dead ends. Apparently “[GUIDE][TREBLE][PIE][9.0] Axon 7 path to HavocOS 2.0“ still works. Instead of vendor update proposed use the one from raysteff66 guide (no change of recovery necessary any more). Fingerprint after restart not working. Using app which is set to use FP after one time login with pw => then it works. Video glitches (blank zones) for some apps. In my installation also some paths seem corrupted but I guess the reason is that I also tried a different vendor update.
P.S.: I use GSI PHH versions without magisk. But I assume the behavior is similar with other versions.
P.P.S: Still not compatible with magisk. Not booting!
Miustone said:
Just revived My Axon 7 with Treble and a AOSP 11 GSI from here:
Releases · phhusson/treble_experimentations
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Used Recovery:
[RECOVERY][TREBLE] TWRP 3.2.3-0L v1.3 Labs Mod for the ZTE Axon 7
- T W R P 3.2.3-0L [Labs Mod] - The Swiss Army Knife TWRP Mod for the Axon 7 INTRODUCTION This was a long term project that I have been using for a long time. I created some scripts to make it easier and faster to flash new roms and...
forum.xda-developers.com
Kernel / Vendor Base:
[Project Treble][v1.1][Android PIE + OREO][GSI][A-only]
What is Project Treble: Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and...
forum.xda-developers.com
Used Bootstack & Modem:
- A2017G_OreoModem.zip
- A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
Everything runs well except for Magisk actually. Smoothest expierence i had till now on the Axon 7! Enjoy
PS: If enough People are interested... I would like to share some last Dev Love for the Axon 7! Android 11 GSI Goodies if You want so
Click to expand...
Click to collapse
Im in please share.
How to install this?