first restart your computer and disable driver signature check
install MTK USB Drivers
Install miflash Pro
Run Miflash pro and run SPflash v6 and load the modified firmware file
Run MTKAuthbypass press Disable auth and power off your device press the volume down button and plug USB Cable
when the tool finished click download on SPflash as fast as possible
wait for flast to end and reboot
if your phone is in same version and system is fine just select nvcfg and nvdata partitions for faster flash
Your phone is Unbricked Now
WARNING !!!! SIM card does not Work after Doing That If someone know how to recover it pls post it in comments
zip with all needed files
Redmi Note 11S 4G-POCO M4 4G (fleur) NVDATA Repair.zip
drive.google.com
Related
i always get [ERROR] BROM ERROR status_da_exceed_max_num (0xc0070005) in SP Flash Tool no matter what i do.
i have tried:
1. Vol -
2. Vol +
3. Vol - and Power
4. Vol + and Vol - and Power
5. press nothing just plug in USB (SP Flash Tool does not detects phone in this)
using SP Flash Tool v5.1628 (tied this on Windows 10 x64 and also Windows 7 x64)
help me here.
my current version is OS 8.0.25 with CHINA ROM Android 6.0.0, Mobile codename NIKEL with 3gb RAM & 64gb internal space.
is their any other way to flash MTK Global ROM to latest version??
with xiaomi miflash tool
Mi Flash Tool does not work with MTK version, it is only for Qualcomm version of Redmi Note 4
you have to do the things in FASTBOOT for the nikel device
please can you provide me a guide link without SP Flash Tools??
Facing the same error, were you enable tox it? Kindly quote me, my device is bricked :3
Edit:
I fixed the issue by replacing chinese preloader
thedeadfish59 said:
Facing the same error, were you enable tox it? Kindly quote me, my device is bricked :3
Edit:
I fixed the issue by replacing chinese preloader
Click to expand...
Click to collapse
how you did it? i cant flash preloader file i always get error 0xc0070005
REDMi Note 3G MTK6592 hardbricked & not able to unbrick with SP flash tool,
I am able to connect the phone to sp flash tool with batterry in as well as battery removed. Flash tool detects the same, also it download procedure gets completed & Flash tool shows "Flash OK" but finaly not booting, no indication on charging, not responding to power key or any key combinations & no logo. please help if someone has came across the same problem & able to get out of the same.
unfortunately, I tried to install magisk patched boot image by using following command when my device was in fastboot mode "fastboot flash boot magisk patched boot.img" using cmd, after that I entered "fastboot reboot" but my device hadn't rebooted, then I tried to switch it on manually but it just vibrated and showed nothing on screen, on trying to start it on fastboot or recovery mode, it does the same and shows nothing. On connecting it to pc it doesn't gets recognized by pc. On connecting to charger, it shows a white led in notification led panel. can you guys please help me! please answer me fast the solution! plzz plzz :cryinglzz!
ShubhAshutosh said:
unfortunately, I tried to install magisk patched boot image by using following command when my device was in fastboot mode "fastboot flash boot magisk patched boot.img" using cmd, after that I entered "fastboot reboot" but my device hadn't rebooted, then I tried to switch it on manually but it just vibrated and showed nothing on screen, on trying to start it on fastboot or recovery mode, it does the same and shows nothing. On connecting it to pc it doesn't gets recognized by pc. On connecting to charger, it shows a white led in notification led panel. can you guys please help me! please answer me fast the solution! plzz plzz :cryinglzz!
Click to expand...
Click to collapse
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
mottaM said:
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
Click to expand...
Click to collapse
Thank you very much @mottaM
Your solution saved my redmi 6a. I had some problems/errors while using spflash tool but after reinstalling drivers and changing the usb cable my problem sorted out.
Also, the new spflash tool is quite confusing for me so i used v5.2152
SP Flash Tool v5.2152 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.2152 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
mottaM said:
Your device is bricked but don't worry, I have a solution but you'll have to open your device.
1.Take the back cover off by first removing the SIM Card Tray. Watch youtube video for this
2.Download SP Flash tool and latest version official rom (fastboot one) from xiaomi firmware updater site(search on google)
3.Take battery connection off (learn from youtube how)
4.Now install USB VCOM drivers on your pc somehow.
5.Download MTK Bypass tool ( ignore virus warning of pc)
6. Open MTKI bypass tool and click bypass. Now hold volume up and connect usb(without leaving the button)
7.When it shows successfull in the logs close mtk bypass tool
8.open sp flash tool and click scatter file and select the file with name android scatter. Leave everything else default
9. Click download in the dropdown and you'll see something is in progress bar. IF stuck, try agian by starting from mtk bypass tool.
10. connect battery when successful. put battery connection and get to normal everything. Charge device and enjoy!!!
Click to expand...
Click to collapse
Thanks you very much!!
Hi Poco x3 gt brick please help me!
Copied from another post, works for me
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
download mtk bypass tool and spflashtoll , install mtk preloader driver , open mtk bypass tool and spflash tool , open scatter file from folder image( from unziped fastboot firmware folder), then click disable auth from bypass tool and put the device and hold vol up + vol down , when seccus click download from spflashtool good luck
Welp. here's my take on how i did it.
Download All Links here:
SP Flash Tool: https://mega.nz/file/G4VnxTKa#_uq8YdL3VS-ilO_cVIDv2zb4RRiVwCgnLlK_xS4uJo8
MTK META Utility: https://mega.nz/file/u4cwzRgL#n15IAtntMiPz_W2wB1Yb6j8yXvb86V2dzLesT6nOnnY
POCO X3 GT Original Firmware + Tutorial: https://romprovider.com/poco-x3-gt-firmware-support/
(MEGA Links are mine for easy download and no corruption)
Download the firmware first before the tools
After downloading all the files above, do this
1. Extract the firmware into your desktop
2. Extract SP Flash Tool into your desktop
3. Run SP Flash Tool and MTK META UTILITY
4. On SP Flash Tool, Locate for Scatter Loading file
View attachment 5632675
Press Choose
5. Locate the scatter file in your extracted firmware
View attachment 5632677
SP Flash Tool will Look like this
View attachment 5632681
6. Run MTK META UtilityView attachment 5632683
7. Press "Disable Auth
View attachment 5632685
8. Long press VOL Up And connect to pc (Check Device Manager Until you see Mediatek USB Port (COMx). If you didn't see it, Download the Mediatek Drivers: https://androidfilehost.com/?w=files&flid=216849 )
If it detected, It will say this on logs:
View attachment 5632687
9. Press Download (NOTE: Just select DOWNLOAD ONLY. DO NOT SELECT "FORMAT-DOWNLOAD" or your IMEI and MAC ADDRESS WILL BE GONE FOREVER!!!)
View attachment 5632689
have some coffee while flashing
If it succeeded, the OK Window will POPUP
View attachment 5632691
Long press power button to reboot until the poco logo shows up. It will reboot to FASTBOOT (aka. Bootloader)
While you're at it and if you have platform_tools,
10. Copy contents in platform tools and transfer to the firmware folder (or copy the insides of the firmware folder and paste it in platform_tools folder)
it will look like this
View attachment 5632693
(don't mind the gms.apk cause i accidentally added there but there's no gms.apk on yours)
11. Run flash_all.bat and wait until the phone reboots.
if it rebooted, it should've reboot to miui.
that's how i restored my phone.
pls reply if it works to you too...
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
try flashing one by one
https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.youtube.com/watch%3Fv%3DdbItjjjXwdk&ved=2ahUKEwizn5PGo6T4AhVFRmwGHQtIB_sQwqsBegQIBRAD&usg=AOvVaw1crzkjvWepJYX8dBLp6njt
No, error continued
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
oh. i'll research
Ok
Luizinho22 said:
No, error continued.
Click to expand...
Click to collapse
is your device global? or your device is just bootloader locked???
Global
the bootloader is blocked
Luizinho22 said:
the bootloader is blocked
Click to expand...
Click to collapse
if your bootloader is locked, you can't do anything... unless if you find a fix
Luizinho22 said:
Hello, I need help after pressing download in sp flash after a few seconds of the following error message:
Click to expand...
Click to collapse
worked for me same model , flash one by one , after flashing one then unchek it and go for the next one ,skip the ones with errors , keep going to the last one , when finish close and disconect ,now you should be able to enter fastboot mode, and now go to mi flash tool, and flash the official global rom ,it should be succed and boot your phone
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
I am facing the same problem. No fastboot, no recover, only a redmi log and repeat.
I do not know what to do. If you found the solution, please share
NikolaTechGuy said:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
Click to expand...
Click to collapse
tutorial to fix your device
Redmi Note 10S - Flashing with SP Flash Tool in BROM mode.
Required Softwares [DOWNLOAD LINK] 1. MTK Drivers 2. LIB USB FILTER 3. MTK Auth Bypass Utility V43 or use Android Utility V109 if MTK Auth Bypass Utility shows expired. 4. SP Flash Tool 5. Stock Firmware STEPS: Install MTK USB Drivers and...
forum.xda-developers.com
NikolaTechGuy said:
hi, i recently tried flashing the stock rom for rosemare_redmi note 10s) But after the flash it wont turn on, blank screen, no recovery, no fastboot only brom mode is left, so i was wondering if there is a way to unbrick it.
Click to expand...
Click to collapse
Redmi Note 10S - Flashing with SP Flash Tool in BROM mode.
Required Softwares [DOWNLOAD LINK] 1. MTK Drivers 2. LIB USB FILTER 3. MTK Auth Bypass Utility V43 or use Android Utility V109 if MTK Auth Bypass Utility shows expired. 4. SP Flash Tool 5. Stock Firmware STEPS: Install MTK USB Drivers and...
forum.xda-developers.com