Can I use my serial cable to update mine xda?
He is advisable regarding connection USB?
thx
Related
Some Mobile Phones are (connected over InfraRed) Standard Modems for Windows XP.
Is it possible to use the XDA as modem for the PC ? I've found a way to connect mobil to the Internet in Germany fur just 3 Cent/min, but there is no modem driver for the XDA ...
Only a Screen_Connect to the XDA (some tools offer this function) is possible to enhance the usability.
There's a way to use the XDA as a modem listed on this site. The method has a number of disadvantages, one being you need a serial cable.
http://xda-developers.com/modem
Otherwise, wait for newer ROMs (> 3.16 ?) that will probably incorporate both IR and serial modem capabilities.
Hi, this is probably a computer problem. Yet, I tried to install my xda as a modem as described at XDA-DEVELOPERS. When I got to the step where the serial port is chosen. THere is nothing to chose.
Any help?
Hi,
got a galaxy note 1717,my friend help me unlock and flash
worked fine with wind mobile aws 1700/2100
after couple of days device started to reboot itself once or twice a day, did factory reset- no improvement
now the the device is rebooting and not even starting
it starts with samsung screen , stays on for about 5 to 10 secs and shuts off and restarts again
please help
called samsung and they said they cannot help as its considered out of warranty be-cos my friend he removed the serial no sticker from the back of the phone
the device is not showing any imei no under phone info and is not recognized when connected to the computer with usb even after installing the drivers on th laptop
did you try flashing it back to stock by odin???? another sugestion is to 1. get your serial number from the back of the phone 2. put it in download mode 3. conect it to kies 4. select tools- firmware upgrage 5. kies will asck for the serial number and phone model 6. insrt your serial number and phone model in capital letters
s/n:-------------------
phone model: SGH-I717
AND HIT START AND IT WILL UPGRADE YOUR PHONE TO THE OFFICIAL ICS UPDATE
HOPE I HELP IN SOME WAY
hi I could not do so as i don't have the serial no on the phone as my friend had removed the sticker from the back of the phone so i will not bw able to do so , so what to do and secondly i dont know the process of flashing it back to stock by odin
flow alkaeda said:
did you try flashing it back to stock by odin???? another sugestion is to 1. get your serial number from the back of the phone 2. put it in download mode 3. conect it to kies 4. select tools- firmware upgrage 5. kies will asck for the serial number and phone model 6. insrt your serial number and phone model in capital letters
s/n:-------------------
phone model: SGH-I717
AND HIT START AND IT WILL UPGRADE YOUR PHONE TO THE OFFICIAL ICS UPDATE
HOPE I HELP IN SOME WAY
Click to expand...
Click to collapse
TRY THIS
http://forum.xda-developers.com/showthread.php?t=1740367
Serial number is settings>phone>status then scroll all the way down. iemi there too.
Get a pc and flash the new ics!!
rangercaptain said:
Serial number is settings>phone>status then scroll all the way down. iemi there too.
Get a pc and flash the new ics!!
Click to expand...
Click to collapse
you are correct ranger
Try removing your sd card. Small chance that it may be causing the issue. Why would someone remove the info stickers? Is it stolen?
hi,
i checked , i got the imei no but there is no serial no on that screen.
and yes its not stolen i have the recipt
rangercaptain said:
Serial number is settings>phone>status then scroll all the way down. iemi there too.
Get a pc and flash the new ics!!
Click to expand...
Click to collapse
Hi everyone, I just bought a used Asus Transformer Prime. I see that the bootloader is locked and when I check for the update it says there aren't any. Here is the data from my tablet :
Touch panel version: MXT-2.0 build-170
Kernel: 2.6.39.4-00003-g12de84f [email protected]#1
Build number: IMLK74.US_epad-9.4.2.21-20120323
Pad EC version
TF201-PAD-0215
I tried using the official Asus unlock tool but i get an error every time: "An unknown error occurs, which may be a network connection issue. Please wait and try again." Offcourse I am connected to the internet but this error occurs for some reason.
This tablet was bought from a guy that works in the ASUS service in Croatia and he assembled this tablet from several others. Could this be the problem?
Can you see the serial number in settings? Under about tablet -> status.
Plenty of people cannot unlock their prime because when they get RMA'd they replace the motherboard which stuffs up the MAC address and serial number combo.
sahilcc7 said:
Can you see the serial number in settings? Under about tablet -> status.
Plenty of people cannot unlock their prime because when they get RMA'd they replace the motherboard which stuffs up the MAC address and serial number combo.
Click to expand...
Click to collapse
It says "unknown" for the serial number :/
In that case you'll need to send it to ASUS to get it fixed.
Not the answer I was hoping for but thank you for your help
Does anyone know how can I unlock my bootloader based on the data I have provided?
fajkovic.sasa said:
Does anyone know how can I unlock my bootloader based on the data I have provided?
Click to expand...
Click to collapse
Without a serial number you cannot unlock.. You need to contact Asus and tell them you have no serial number and they will open an RMA.
i was following the st flash tutorial. I can never get dfs to read my phone. when i click on ports or manager depending on version of dfs. I see my ports, one diag serial port and one modem port. when i try and connect to the daig serial port nothing shows up in dfs it just shows cps na in all the fields. when i try the modem port it flashes some info in a couple fields and thats it. I dont know whats going on? I dont have a samsung cable and im using a htc one. im thinking maybe that could be my problem even though i see the ports??? any help would be greatly appreciated. thank you
Samsung cable made no difference
in cdma workshop 2.7 i get phone does not answer
ok got it. had to change it from diag,null to hfk,diag.
i would delete but might be useful for somebody else
I tried falshing both L29 firmware and L09 firmware using USB OTG, neither worked. (my guess is that these firmwares are not built for my region)
my phone's build number: LYA-L09 9.0.0.273 (C34E11R1P16) purchased from optus australia and is a single sim card phone.
Anyone experiencing the same issue?
prawnhub said:
I tried falshing both L29 firmware and L09 firmware using USB OTG, neither worked. (my guess is that these firmwares are not built for my region)
my phone's build number: LYA-L09 9.0.0.273 (C34E11R1P16) purchased from optus australia and is a single sim card phone.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
I got the exact model and very same region as you mate and I successfully dload both those firmwares.
What are the steps you are taking ?
souljasteve84 said:
I got the exact model and very same region as you mate and I successfully dload both those firmwares.
What are the steps you are taking ?
Click to expand...
Click to collapse
1. bought a USB c adaptor from kmart (successful)
2. formatted the usb stick then paste the required zips to dload file (successful)
3. connect usb stick to phone via kmart adaptor (successful, i can get access to the zips from my phone)
4. dialed the number and clicked software update (successful)
5. update interface showed up (successful)
6. update failed, phone restarted
prawnhub said:
1. bought a USB c adaptor from kmart (successful)
2. formatted the usb stick then paste the required zips to dload file (successful)
3. connect usb stick to phone via kmart adaptor (successful, i can get access to the zips from my phone)
4. dialed the number and clicked software update (successful)
5. update interface showed up (successful)
6. update failed, phone restarted
Click to expand...
Click to collapse
Maybe try just putting the sd_base zip in the dload folder by itself and try that
souljasteve84 said:
Maybe try just putting the sd_base zip in the dload folder by itself and try that
Click to expand...
Click to collapse
i just tried and got the same result, sigh...thanks anyway
prawnhub said:
I tried falshing both L29 firmware and L09 firmware using USB OTG, neither worked. (my guess is that these firmwares are not built for my region)
my phone's build number: LYA-L09 9.0.0.273 (C34E11R1P16) purchased from optus australia and is a single sim card phone.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
i have the same model as you, and failed in same step, guess not fit our model?
i am using a usbc card read.
prawnhub said:
1. bought a USB c adaptor from kmart (successful)
2. formatted the usb stick then paste the required zips to dload file (successful)
3. connect usb stick to phone via kmart adaptor (successful, i can get access to the zips from my phone)
4. dialed the number and clicked software update (successful)
5. update interface showed up (successful)
6. update failed, phone restarted
Click to expand...
Click to collapse
Guess it is the problem with Kmart USB C Adaptor, as it is not saying it is OTG supported, I used a USBC card read and got same error as yours. Today I change to the USBC OTG then it worked, updated to EMUI 9.1. So try something says USBC OTG adaptor.