I need to connect my Qtek to tomtom wired mouse, and power both of them. (BTW dont want to keep pluggin cables in and out)
I purchased the tomtom holder from pdamods for the xda, but it's not great (burning smell from electronics & noise interference on the pda speaker), hence I would like to try a different approach.
THe way I did this for my previous IPAQ3870, was to purchase a y-cable (connecitng the pda/cig light/gps) and a brodit mount that allowed the pda connector of this cable to be screwed into the mount (therefore enabling instant connection).
I can find the following Brodit part numbers (846612/847612/845612) but cannot find a UK supplier for this mount or the y-cable
Would appreciate any adivce or assitance available... cheers
Johnyb said:
I can find the following Brodit part numbers (846612/847612/845612) but cannot find a UK supplier for this mount or the y-cable
Would appreciate any adivce or assitance available... cheers
Click to expand...
Click to collapse
I work for the importers of Brodit into the UK - we can't supply you (trade only) but www.incardiscount.co.uk will do next day delivery for you!
If you speak to them, they might be able to do something different to get all devices connected and working without a Y cable - give them a call
...Spence
Related
Hi!
Anyone fonud out until now where to get the 22pin connector for the MDA/XDA III device? It has changed a bit from the iPAQ 3800 style, so accessoires for I/II won´t work
Furthermore, has the pinout changed?
What I need is a cable for connecting my GPS-reciever, or the parts to build one.
Thanks in advance,
Danyel
OH NO, you are saying that the MDA II accessoried, chargers, etc., won't work with the MDA III?
Well, it looks like that...
I have an USB-sync-cable, car charger and my GPS-reciever. Without forcing the plug it won´t fit into the new connector.
The new one has a gab on one side and two little pits wich fit into gaps in the devices connector.
I´ll post a picture of the old and the new one... MDA III´s camera is not quite good for macro-photos.
Well, I have "reconfigured" my old GPS- and USB-cable. It´s just takeing away some of the plastic on the connector. Both cables work fine for the MDA III now, take a look at the picture:
hey folks,
i try my best english!!!!
at dev_dme
i got the qtek2020 from vodafone D2. now i want to plug my usb gps reciever with sirfII chipset to the pda. 5v for the usb power comes from accus. this wouldn't be the problem i think. but how i figure it out which connectors of the pda are the right connectors for die TX and RX of the reciever? and the final question: is this what i want to do (usb pc gps reciever at pda) possible?
if you want t answer me in pm dann auf deutsch ;-)
thanks.
Anonymous said:
is this what i want to do (usb pc gps reciever at pda) possible?
Click to expand...
Click to collapse
Therefor you´ll need a USB to serial converter, as far as I know.
if you want t answer me in pm dann auf deutsch ;-)
Click to expand...
Click to collapse
No PM, you haven´t been logged in
22 pin adaptor for QTEK 9090
hi, you need original connector you can try with 2020 22 pin but after some days or week you will damage you QTEK 9090 and you not be able to use anymore the connector! i suggest you to buy ORIGINAL see here available : http://www.bluetrade.fr/achat/produit_details.php?id=76226
i hope i'm logged in now!
to dev_dme you missunderstood me? i have an usb gps mouse so i need a seriell one. and there are no converter from seriell to usb.
to last guest
i think i posted in fals thread. i have a qtek 2020!!!! no 9090.
There are USB to serial converters made by Iogear, search the web. You would have to redue the cable to connect to your Qtek. But since you have bluetooth, though the old one away and get a blue tooth GPS, much nicer.
converters from usb TO seriell but not from seriell TO usb. i'm right?
The USB driver was on laptop to change the port to a serial port but the communication was bidirectional.
You could also look at maxim semiconductors, I know they make a chip that converts serial to USB but I couldn't find it.
http://www.maxim-ic.com
but i need usb to seriel converter..... i want to use an usb device at a seriell port
They have a device, I saw it in EE Times twice (as I said I need that) that will do exactly what your looking for. It would connect to a USB device, takecare of all the protocal and then spit out serial bits of the data. I beleive the formating (USB-serial bin/ASCII, bit ording) was able to be changed via reg settings.
maybe search EE times website.
aimchr said:
but i need usb to seriel converter..... i want to use an usb device at a seriell port
Click to expand...
Click to collapse
Well, your GPS mouse is a USB client (slave). You can only connect it to a USB host (master), which the XDA II is not. So you would need an adapter that contains a USB host. As paulmc says, they seem to exist, but seem to work only with "big" Windows (they need drivers), and I am quite sure they are really expensive.
I really recommend you get either a Bluetooth or a regular serial GPS mouse. Both are easy to connect to an XDA II.
Cheers, Daniel
hello folks,
information for all users they helped me: now i bought a holux gm 210 gps receiver with ps2 connector. it should be one of the best.
but now new questions:
1. is there a german plattform like this in the internet? which one?
2. how can i get 5VDC from a the 12VDC connector in a car? i dont need 4,5 or 6V!!!!
3. who know anythink about the holux gm210 voltage supply (spannungsversorgung). how much V need the gm 210? exactly 5VDC?
thanks
bye Christian
Anonymous said:
but now new questions:
1. is there a german plattform like this in the internet? which one?
2. how can i get 5VDC from a the 12VDC connector in a car? i dont need 4,5 or 6V!!!!
3. who know anythink about the holux gm210 voltage supply (spannungsversorgung). how much V need the gm 210? exactly 5VDC?
thanks
bye Christian
Click to expand...
Click to collapse
1. There are several. Try www.pocketnavigation.de for a start.
2. There are voltage regulators you can buy. But be very careful, the voltage in a car is full of spikes and other nasty things. You need a good voltage regulator if you don't want to endanger your new Holux. The usual solution is to buy a holder for the PDA that also has a connector for the GPS mouse. This gives you a well filtered voltage for your mouse.
Cheers, Daniel
tadzio said:
1. There are several. Try www.pocketnavigation.de for a start.
Click to expand...
Click to collapse
more more more
tadzio said:
2. ....is to buy a holder for the PDA that also has a connector for the GPS mouse. This gives you a well filtered voltage for your mouse....
Click to expand...
Click to collapse
maybe its silly but i dont wanna buy i want to build it by myself.
because i want biuld an accu-charger for my qtek too. it should supply the gps mouse too!!!
i cant describe it better in english. damn..... :evil:
also i need thias speciial pda connector for the mdaII (aka qtek 2020). where can i buy it for low?
and some more important for me: i need information for the pins. what pin for which signal?
Does anyone know if the pin-setup for the 'blue angel' aka Qtek9090 is different then the 'Himalaya' aka Qtek2020?
I want to connect an external speaker and microphone to it (described here) but i'm not sure if the pin-layout is the same :roll:
Thanks!
Grtz,
DUTCH
anyone found the pinout for QTEK9090(Blue Angel) yet ?
please share.
Ive read many post on here and others. I must say Im confused.
Is the new Blue Angel connector physically the same as the previous XDAII connector?
Are the pin outs the same?
Some people say no problem, some are filing theirs down??? Some are "forcing it in" - YIKES
i would love to know as well
The pin outs are the same - the connector is physically the same size, but there is one minor change - there is a little 'step' on one edge of the connector.
XDAII accessories, such as chargers, usb and gps do fit but you need to be careful when you insert them.
Forget my stupidity. I used to own the Siemens SX56 and had hotsync and car charger cables.
The question is now I have the Siemens SX66, is it safe to use the same cables from the SX56? I haven't tried it since I don't want to kill my new toy!
If anyone knows or can verify that it's safe it would be really appreciated.
I am using car charger, usb sync cable and wired gps that were originally bought for my XDA1, then used on XDAII and now work fine on MDAIII.
Do any of the serial keyboards work with XDA IIs?
I tried to connect the stowaway keyboard I used with my XDA II but it does not seem to work with my QTEK 9090.
I'm only guessing, but I would think that the drivers weren't written for wm2003SE.
I have the darfon fold out keyboard that I bought for my sx56, and last night I got it working just fine with my new sx66, so yes, they work. I needed to go to darfon.com and download the newest version of the driver.
I have one of the IR keyboards and the supplied driver works fine, but I have to balance the MDAIII on something to make it high enough for the IR receiver on the keyboard because the MDAIII IR is on the side.
The pin outs are the same
Click to expand...
Click to collapse
They are not!!!!!
There is a voltage output from an XDAII when in a call, but the XDA IIs doesn't give the voltage!
Can't remember which pin off the top of my head but I have been testing this and found this to be a major problem when designing a proper car kit for both items!
..Spence
Bit worried about using my incar chrger from my xdaII for my IIs. Does anyone know where I can get a charger or usb sync cheaply for the IIs/pd2k? Expansys are charging £20! There's one here:
http://www.firstphoneshop.co.uk/o2-phone-accessories/o2-imate-pda2k.shtml
But i'm not sure its not just the old II charger...
Hi all,
I see birdog has put piccies up at:
http://forum.xda-developers.com/viewtopic.php?t=18435&highlight=pin+blue+angel
(and thanks btw) but can anyone confirm this pinout?
Cheers!
Does anyone know of a place that has an actual docing station/cradle for the iMate PDA2K for an automobile. I want to be able to get in my car/truck and sit it in a secure cradle, that I can later hookup a hands free kit, GPS, charging, as well as hooking up to stereo (by any method). I know I am asking for a lot but someone has to be thinking like me.
For staters I need a secure cradle that has some form of universal mount that can be mounted to a car. I'm not asking for a device that looks like it was designed to hold a pack of cigerettes that takes you a few minutes to hook up all the cables and attachments when you get in.
The cradle should have hookups built in that port out all necessary pins from the dock (ie: charging, headset, hands free, and whatever GPS may utilize). It needs to be device (or device type) specific, I'm tired of the generic device that will hold any PDA, radio, cellphone, etc.
Maybe I am just ranting but common guys, there's got to be a company doing this or SHOULD be a company doing this. I would buy it, how about others?
I may have to build my own with an extra cradle, but the device needs more support in case I hit a bump I do not want it to fly out. Something like an extended back to the existing cradle that curv around to the front @ the top so if a bump dislodges it it will fall back into the cradle.
Raptor
I use the brodit activeholder
it's a cradle with a connection where you can connect your charging cable, gps cable,....
http://w3.easytrade.net/brodit_shop/product.dip?item=1244929&fid=1245077
Tnx for the info. I knew there was a holder for it. Can you please tell me who sells it? ( In the Netherlands / Belgium ). Because no one has it in stock. It's just too new!
Paradroid said:
http://w3.easytrade.net/brodit_shop/product.dip?
Click to expand...
Click to collapse
Awsome, definately the right direction. Thanks a bunch!!!
tikkel said:
Tnx for the info. I knew there was a holder for it. Can you please tell me who sells it? ( In the Netherlands / Belgium ). Because no one has it in stock. It's just too new!
Click to expand...
Click to collapse
http://www.pdashop.nl/product/12370/12349
Status van dit product: / Status of product:
Tijdelijk niet leverbaar / Temporarily not avaible!
I know the PDAshop. It's just around my corner. But they doesn't have it in stock.
Is this unit available in Australia or online?
Ed
Have a look here www.brodit.com
Does anyone know where I can buy the plug that plugs into the bottom connector for an XDAIIs?
I've asked everyone I can think of, searched Google, Maplin(UK) and Expansys and I can't find one.
It's probably because I don't know the correct name for it!
Ideally, I'd like one that has all 22 connections and even cables attached - they look really hard to solder onto by hand!
Any information would be greatfully received :lol:
Thanks
...Spence
http://www.gomadic.com/connectors.html sells connectors
Wallaby, Himalaya are compatible with HP iPAQ Connector Plug Assembly (19/22/38/39/41/43/51/54/5500 Series)
but read that the plug of BlueAngel is not exactly the same.
I purchased an XDA II car charger from the O2 shop in Manchester - it came with a plug that works fine with my XDA2s - have used it on the car charger and on the supplied power lead - charges fine.
When I got my IIs, it CAME with the plug already, any standard car charger can plug right into that plug and then the IIs... You sure you guys didn't get it?????
I think you mis-understood me - I'll try again!
I have developed a complete installed car kit for XDA, XDAII and IIs that does the following.
Mutes stereo when in call and puts all sound to front speakers
Can put navigation commands through the stereo
Hooks up to external microphone
Has PS2 (Holux) and RJ11 (TomTom and Leadtek) GPS connections
Charges device
I'm trying to get hold of a connector with 22 connections because I have one problem left.
To switch the car kit on, I either need a 5V feed from the device OR need to be able to put 5V in on one pin and get 5V out of another.
If anyone can help with either the connector or letting me know which pins I might be able to use send me a mail please
Thanks
...Spence
connectors
have you tried RS componets or CPC.?
Is this all I would need to receive a GPS signal on my i-mate JASJAM?
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
I just sent the following inquiry to them, I'll see what they respond.
It sure would be sweet if that is all it needs!
---------------
Does this item imply that a Cingular 8525 has a built in GPS that will become active using this item?
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
Thanks
---------------
think their is a thread about this topic and sad to say it does say a GPS solution other than buying a reciever is very much improbable..
here's the link to the topic:
My solution was to purchase the Garmin Mobile 20 cradle. www.garmin.com
The cradle holds the phone and has a suction-cup mount for the windshield. The cradle plugs into the cigarette lighter and has a charging cable that plugs into the mini-USB port on the phone.
Software can be loaded on your memory card (I have all North American and Canada).
For less than $250, I have a very good navigation system that travels with me.
Erik Latranyi said:
My solution was to purchase the Garmin Mobile 20 cradle. www.garmin.com
The cradle holds the phone and has a suction-cup mount for the windshield. The cradle plugs into the cigarette lighter and has a charging cable that plugs into the mini-USB port on the phone.
Software can be loaded on your memory card (I have all North American and Canada).
For less than $250, I have a very good navigation system that travels with me.
Click to expand...
Click to collapse
promising product but kinda expensive though.
OP, if your considering Erik Latranyi's suggestion, you may want to consider buygpsnow.com, i dont work for them but i can swear by their good service. they have packages too that you can choose from and more cheaper than Erik's setup.
That antenna on cnn is not for hermes. It plain and simple will not work. The connector on the phone that it is shown linking too is a GSM antenna connector for car kits.. it will not provide GPS.. not now.. not ever.
Bluetooth GPS's are easier/cheaper/faster/tidier and the real killer... possible
So go for one of those instead. I use a $50/35GBP Holux bluetooth GPS with my hermes.. works fine.
(on the plus side.. if you are lucky the cnn antenna wont damage your phone.. if you are unlucky it might well)