Related
I tried to upgrade my QTek from 1.66 to i-mate 1.72
Then it turned off and it won't turn on again
Can anyone tell how to make it work again?
Please help
You will have to give more details I'm afraid.
ie
Were there any messages on the PC during upgrade?
Was the AC power plugged into the cradle during the upgrade?
Is the display on the XDA2 completely blank? If not, does it say Serial or USB at the top and a version number at the bottom?If so, have you attempted to boot into "Bootloader mode"? (hold down D pad in it's central position and then hard reset)
Have you tried attempted to repeat the process on another PC?
Let us know the answers to these queries, and then perhaps we can help more.
Cheers
Ant
buy another Qtek2020 coz yours gone dead forever ..... "Game Over"
maybe yours confused of repeating upgrade and shut itself off
hardluck :wink:
Goto "bootloader mode" & try to upgrade again.
I don't understand , when there's a failure during upgrade ( happened to me many times ) , u go to the Bootloader with the " Serial " and " V1.* ", and restart upgrade :shock: :!: :!: :!:
I usually don't mind newbies asking questions but this particulat question has been addressed at least 50 times and a simple search for "dead 2020" would have resulted in a fix for your problem.
To fix your problem do a search on how to put your PDA in the boot loader mode and then try to restart your update while in the bootloader mode.
To put your 2020 in the bootloader mode just hold down the round joystick button while holding down the power and the reset button on the side.
Good luck
When your turn it on do you see this:
SERIAL
Vx.xx
(x.xx = version number ist variable)
(if you see this you are in boot mode)
PLEASE:
if thats so PLEASE search forum first the solution is out there!!!
there are about 1001 topics about it, so you will find a solution!!!
(To get it in boot mode press ON/OFF button, Softreset and The big round button at the same time if you the boot mode goto PLEASE: 8) )
good luck!!
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung
hello
please could some one help.
I am unable to flash my rom using to USB way or SD card.
i like to get the new WM6.1 that is out.
rom Ver 3.62.305.5
rom Date 11/06/07
radio Ver 32.87.7020.20H
Extrom Ver 3.62.205.116
jarridbishop said:
hello
please could some one help.
I am unable to flash my rom using to USB way or SD card.
i like to get the new WM6.1 that is out.
rom Ver 3.62.305.5
rom Date 11/06/07
radio Ver 32.87.7020.20H
Extrom Ver 3.62.205.116
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=299462 followed those instructions??
still you're not giving us all the information, get to boot loader by pressing ok on left and power on right, and stylus in and tell us what it says from hard spl etc details on bootloader
what i could see
i tried flash with the old i mate flash fromthe imate web site
and got toe where ti show the three colours
with
herm 100
IPL 1.04
herm 100
SPL-2.03
showing
No Hard SPL.... Welcome to A LOT of reading on how to unbrick your Hermes...
Try to Hard reset your Hermes. hold both soft keys then reset with stylus. hold ALL buttons in until it asks to reset back to factory. Press "R" on the slideout keyboard and then space. Follow the prompts.
If this works INSTALL HARD SPL......
Then try to flash other roms....
Dear All, Please help me how to repair my ATOM.
My ATOM PURE was dead after upgrade from wm 6.1 to wm 6.5.
LCD blank all button doesn't work.
which ROM did you download ?
what was the Setup you used for Flashing - OS Only, OS+Ext ROM, etc...
Did you notice any error while flashing?
After you try to start the PDA now, do you get any LED / LIGHT or ray of light on LCD.
Did you try starting with another battery...
Sorry, but will ask more questions sooon. Actually trying to troubleshoot the issue.
hehehehe, bad news..
hehehehe
suga_ngr said:
Dear All, Please help me how to repair my ATOM.
My ATOM PURE was dead after upgrade from wm 6.1 to wm 6.5.
LCD blank all button doesn't work.
Click to expand...
Click to collapse
i also have the same expirience with you, my phone totally like dead, no respone at all!!! even switch on or press any buton. any body can help?
We need to know which ROM you downloaded to upgrade your Device with... if you don't tell us, then all we can do is sit around making wild guesses without getting anywhere...
Dude, chill, for all you know its a bot your talking to
i have your answer
steven3889 said:
i also have the same expirience with you, my phone totally like dead, no respone at all!!! even switch on or press any buton. any body can help?
Click to expand...
Click to collapse
Just pull out the battery for a while. Next, hold down the on button and the camera button at the same time, and then put the battery back in. this takes some practice to get it right. After it will boot up to MN1 bootloader.
Cheers
Dead ATOM Pure
jadephyre said:
which ROM did you download ?
Click to expand...
Click to collapse
My friend
i was try to upgrade from wm 6.1 to 6.5 from arunk2 link, it's ROM CE OS 5.2.210501.
thanks very much for your cooperation and i hope my atom can be life again
jadephyre said:
We need to know which ROM you downloaded to upgrade your Device with... if you don't tell us, then all we can do is sit around making wild guesses without getting anywhere...
Click to expand...
Click to collapse
that ROM come from ARUNK2 link.
How to recover dead atom pure after failed wm 6.5 upgrade
suga_ngr said:
that ROM come from ARUNK2 link.
Click to expand...
Click to collapse
HOW TO RECOVER DEAD ATOM PURE AFTER FAILED WM 6.5 UPGRADE
Step 1. Pull out the battery
Step 2. Do the following 2 things simultaneously:
1) Press down the Camera Button (right side of your Atom)
2) While holding Camera Button down, put the battery back inside.
Step 3 Wait for 2 seconds. Now your Atom will automatically re-boot to MN1 Bootloader.
Once you are in MN1 Bootloader, connect to your PC by USB link, and upgrade with any WM 6.1 ROM.
Good luck
Christian
GOOD NEWS
Dear KLAPEREK
I have been do all your command and now my atom is runing well, so thank you very much for your help.
by the way iam come from Indonesia, i would ask regarding wm 6.1.
1. now iam using wm 61 ce os 213 pdavie all device are runnig well ( a2dp bluetooth, wifi, gprs,infra red ).
2. do you know how to fix stk software ? everytime when i try to use stk on the password box always popup please inset something after iam fill that box with passwort string.
3. what your suggestion for the best wm for atom pure ?
4. iam realy appreciate with your help regarding my atom problem
5. do you have some blog or email
6. this my e-mail : [email protected]
klaperek said:
HOW TO RECOVER DEAD ATOM PURE AFTER FAILED WM 6.5 UPGRADE
Step 1. Pull out the battery
Step 2. Do the following 2 things simultaneously:
1) Press down the Camera Button (right side of your Atom)
2) While holding Camera Button down, put the battery back inside.
Step 3 Wait for 2 seconds. Now your Atom will automatically re-boot to MN1 Bootloader.
Once you are in MN1 Bootloader, connect to your PC by USB link, and upgrade with any WM 6.1 ROM.
Good luck
Christian
Click to expand...
Click to collapse
hi,
i was follow your step, but still failed to boot on my o2 atom pure,
take out baterry > hold camera button and put back battery at the same time. any other solution?
Dear
First you try to go in boot loader mode and then you try try upgrade rom, if your atom did not power on then you lost his boot loader.
don't worry we have the solution to repair the boot loader, first of all you try to power it on in bl mode if not then mail me at "[email protected]" i will tell you the complete procedure for repair the atom with help of jtag.
I have a problem when Upgrade WM 5 to WM 6.1
when i upgrade my atom pure from WM 5 to WM 6.1 is success, and than i downgrade from WM 6.1 to WM 6.0. after flashing the device reboot and than the atom only vibrate and blank on the screen.
I try to hard reset it's still vibrate only and cannot load bootloader screen...
so somebody please help me....
ps : sorry my english it's not good, i hope all of you understand what i mind...
thanks
If you still haven't solved you problem:
you can simply pull out the battery while pressing and holding down the camera button AND reinserting it while still holding the camera button down.
then once you release the camera button.
it should boot
This worked for me and my atom loaded to the bootloader and i was able to successfully flash it