Hello all
I m new to the forum....have bought O2 Atom. I m facing a problem. How can I hard reset the set.
Anybody can help
thanx
khawar
Wiki is your friend
http://wiki.xda-developers.com/index.php?pagename=Atom_Hardreset
General hardreset for WM5
Start -> settings -> system (tab) -> Clear Storage
Power+Reset
HOw TO HARD RESTAT
1st u can hold in recoder button and then pres power + resat button at same time it will be in you manuall hand book
I thing, that since the lust post (It was 2 mounths ago, hi learn, how to perform the hard reset...
Related
I tried to upgrade my QTek from 1.66 to i-mate 1.72
Then it turned off and it won't turn on again
Can anyone tell how to make it work again?
Please help
You will have to give more details I'm afraid.
ie
Were there any messages on the PC during upgrade?
Was the AC power plugged into the cradle during the upgrade?
Is the display on the XDA2 completely blank? If not, does it say Serial or USB at the top and a version number at the bottom?If so, have you attempted to boot into "Bootloader mode"? (hold down D pad in it's central position and then hard reset)
Have you tried attempted to repeat the process on another PC?
Let us know the answers to these queries, and then perhaps we can help more.
Cheers
Ant
buy another Qtek2020 coz yours gone dead forever ..... "Game Over"
maybe yours confused of repeating upgrade and shut itself off
hardluck :wink:
Goto "bootloader mode" & try to upgrade again.
I don't understand , when there's a failure during upgrade ( happened to me many times ) , u go to the Bootloader with the " Serial " and " V1.* ", and restart upgrade :shock: :!: :!: :!:
I usually don't mind newbies asking questions but this particulat question has been addressed at least 50 times and a simple search for "dead 2020" would have resulted in a fix for your problem.
To fix your problem do a search on how to put your PDA in the boot loader mode and then try to restart your update while in the bootloader mode.
To put your 2020 in the bootloader mode just hold down the round joystick button while holding down the power and the reset button on the side.
Good luck
When your turn it on do you see this:
SERIAL
Vx.xx
(x.xx = version number ist variable)
(if you see this you are in boot mode)
PLEASE:
if thats so PLEASE search forum first the solution is out there!!!
there are about 1001 topics about it, so you will find a solution!!!
(To get it in boot mode press ON/OFF button, Softreset and The big round button at the same time if you the boot mode goto PLEASE: 8) )
good luck!!
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung
...tried to unlockit with the athena-unlocker! After Step 1 it startet to Step2 und suddenly the connection was lost!
Now the battery lamp of the Ameo is in green mode!
I can make a factory reset, but I see no bootloader mode!
Screen is black an a green light aroundthe joystick! The Connection via active sync to my pc isn't available any mory!
What do you think?
game over - any change to bring my Ameo back to life?
Edit1: ther is no MiniSd Card inside
Hi, I do not think your Ameo is lost. Some else hat the same problem, please check http://forum.xda-developers.com/showpost.php?p=1358430&postcount=35 and try the steps described there. In most cases, it is also possible to flash WM6 if your device is stuck in the bootloader.
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
...you were right - thx a lot 4 the solution
stupiddog said:
There are two things I would like you to try:....
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Thx a lot
Jackpot thx -
Kisses from Austria
Many thx!
utakurt said:
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Click to expand...
Click to collapse
You're welcome, have fun with WM6 However, if you want to kill the SIM-Lock/Net-Lock on your device, you have to run the unlocker again. It seems that WM5 has some problems running the unlocker while WM6 does not.
After you successfully run the unlocker again, remember to flash your WM6 ROM again (watch the battery power, it should always be >50% before starting flashing!) so you have the newest Radio version.
If problems persist after flashing, this page in the XDA wiki might be helpful: http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
stupiddog said:
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
Hi, mate
Wot if those two things does not work??
i mean
if we can not get into boot loader or hard reset
i have this ameo does not go into boot loader or does not do hardreset
only red light on the joystick
problem occured while unlocking with Olipro, completing step 1 (got stuck at the point of saving the spl file)
thank you very much in advance for your help
BR,
Hello... Everyone there,
I had a problem here, need help.
I upgrade my dopod 838pro to Window Mobile 6.5.3, after upgrade it keep stuck on start up and just show start up screen, cannot turn on. I had try soft reset and hard reset still the same. Now the device cannot connect with ACTIVE-SYNC, then I cannot flash another ROM. Any Solution ?
I was having the same problem when i installed the WM6.5 titanium. Just hard reset it and wait a little lobger.
Try flashing with another ROM guys..
the most obvious about my athena
ATHE100
IPL-v1.00
SPL-v1.10.0000
mo-bo has some problems like i.e. USB is not working for synchronizing and upgrade, charging is OK, microdrive is not accessible to the only option to upgrade remains via SD card
today during hard reset .... I am stuck on loop of factory reset which is supposed to do hard reset but it does not
after powering up (after completing steps on the screen) the screen is snow white and nothing happens
when I take out the battery and put it back in ... it still gets me to the same point i.e. to hard reset screen yes/no (i.e. press action to restore factory default, press camera key to exit)
can anyone please tell me :
1. how to upgrade my SPL ?
2. how to solve a/m problem ?
and possibly where to find the latest wm60 English ROM for my spl that I can install from SD card
regards
andrzej