Related
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
hanissusa said:
I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
This thread was hardly 1 hour old and you make a rather rude statement. This forum is supported by volunteers, not people that sit around all day waiting for posts to come in and find a solution that drops out of no-where.
hanissusa said:
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
You are not going to make any friends this way mate. If you want quick solutions then read all the material that's on here and search for the answer yourself.
If you don't want problems then leave your phone in its standard state.
WB
@camus_dvd: have you checked out the wiki? There may be a solution there. If not, you need to give us more info?
Have you ever successfully flashed before?
Give us Versions? Windows, ActiveSync, .NET, ROM, RUUWrapper (e.g. is it the custom or a standard shipped), etc.
Did you try removing the battery for a couple minutes?
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
These answers will help us help you.
Oh, and about the volume issue, try using the google search link in my sig to search the forum for "hermes low volume tweak" or something like that. I had a similar problem, but cannot remember the tweak. I do not THINK It was the one you posted.
Heck - onew final edit. I got curious and did the searching. You will find a thread HERE and it references a tweak in the wiki HERE HERE . Hope this helps.
@hanissusa: sorry you did not get any "intelligent" answers. If you are unhappy, you are not a prisoner here.
If you want quick solutions then read all the material that's on here
Click to expand...
Click to collapse
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
The reason I tried to flash my radio bootloader is because suddenly the phone started to freeze(about every 30 mins). I thought may be the operator has a new radio version so I need to upgrade in order to get the best connection and most importantly never have my phone freezed again.
Did you try removing the battery for a couple minutes?
Click to expand...
Click to collapse
Tried about 20 times, still unable to flash radio rom with any of the available versions. Always freezes at 0% thru RUU, if I use SD card method freezes in the 10-15% range. I am able to flash everythin, including SPL, operating system, but not the radio rom !!!
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
Click to expand...
Click to collapse
Tried that as well. Tried using MMTY, checksum gives me radio error.
sorry you did not get any "intelligent" answers
Click to expand...
Click to collapse
I got several answers of this type:
"Go read Wiki"
"Go try this method"
and I have done all of it and nothing helped the problem.
You can consider above answers very intelligent, however I did not get a single anser form POF or Olipro - people who actually created this software and know most of the tricks.
for me same problem, only that i can't use my device anymore( : I tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%
hanissusa said:
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
Click to expand...
Click to collapse
I wonder what kind of institution gave you said degrees? I have a degree in Japanese and Linguistics but I suck at both.
hanissusa said:
"flashed my device and made super CID, so its fully unlocked"
Click to expand...
Click to collapse
Flashed and superCID does NOT mean fully unlocked. If you can read programming and or networking text books, I don't understand what is so hard about the wiki?
If you read everything and actually tried to understand it all, then you would know that flashing the radio is inherently dangerous and that 9/10 times the radio is not the issue.
camus_dvd said:
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
Click to expand...
Click to collapse
Read here:
http://forum.xda-developers.com/showthread.php?t=332565
then here:
http://forum.xda-developers.com/showpost.php?p=1177210&postcount=5
or from here:
http://wiki.xda-developers.com/
then read the stickies and do a search.... it's all been discussed before
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Is there a senior, experienced member on this forum from London, UK ? Please help me fix the radio, beers and drinks are on me.
ady_uaic said:
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Click to expand...
Click to collapse
Is this what you are looking for?
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
@hanissusa,
Why don't you just send your device back to the repair centre, foot the bill, and put it all down to experience? You may have a hardware problem that nothing on here might solve.
You might be better off going down that route than going through the pain of trying to sort it and not getting anywhere. Also stops you p**sing people off on here. You can't claim that just because you have had a bad experience we should all stop flashing our devices.
We are all aware of the risks and if we can't fix it then its put your hand in your pocket time and send it back to be repaired.
Good luck with it; hope it all works out.
WB
thx a lot. I will try it, 'cause i'm tired to use all kind of stufs
my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?
how can i downgrade my SPL ?
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
hanissusa said:
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
Click to expand...
Click to collapse
Have you called the repair centre to see whether they will fix it or not? Your worse case scenario is that they say no. There again they might say yes, especially if you are willing to foot the bill, or put you in contact with another company who can sort it out for you.
I really do hope you can get it fixed; however I think you have started out on the wrong footing on this board and you may well find that people on here now just don't want to help you out (please don't shoot the messenger).
Good luck with it.
Cheers
WB
ady_uaic said:
how can i downgrade my SPL ?
Click to expand...
Click to collapse
You can't without a running OS setuped on your device. If you don't have the HardSPL you should try to flash with the default flasher AND a rom matching your CID.
If there is a rom matching your CID out you may have quite good chance to get your hermes back to live. Toying without hardspl is a really bad thing
and that hardSPL how can i do it?
Have you called the repair centre to see whether they will fix it or not?
Click to expand...
Click to collapse
Which centre should I call if I live in London, UK ? Maybe somebody wants to help me fix this and get paid ?
hello,all the masters of this site and pda phones....i have a spv m3000 from orange G4 locked and tried to flash t-mobile radio prodigy with softSPL...it went on first screen with the beer image and got stuck on it...after i removed my battery it wouldn't start,enter bootloader,soft,hard reset it wont even charge(red led not blinking) my computer doesn't recognize it.i tried giving the batey a 9v,6v shock and nothing happened phone is still dead...i'm not a good electronist so i can't use the method to rewrite the inernal memory soldering wires...etc....could you give me a solution???i'm desperate(
xardas_90 said:
hello,all the masters of this site and pda phones....i have a spv m3000 from orange G4 locked and tried to flash t-mobile radio prodigy with softSPL...it went on first screen with the beer image and got stuck on it...after i removed my battery it wouldn't start,enter bootloader,soft,hard reset it wont even charge(red led not blinking) my computer doesn't recognize it.i tried giving the batey a 9v,6v shock and nothing happened phone is still dead...i'm not a good electronist so i can't use the method to rewrite the inernal memory soldering wires...etc....could you give me a solution???i'm desperate(
Click to expand...
Click to collapse
Well, there's no such rom 't-mobile radio prodigy',you are mixing things here.Its either Radio Rom or OS(Rom). Assuming by your post 'the beer image' as you say,it must be the "Button's Rom 1.05" with IPL/SPL 1.05 (G3 Bootloaders). Did you flash the Button's Rom 1.05 on your G4 device,well,if so then,its a "BRICK",coz flashing a G3 Rom with IPL/SPL in it'll certainly brick a G4 phone,Now nothing can be done with it.
well i've heard something of leaving it 24 hours without the battery and shoking the battery but no luck so far...isn't there any program that would recognize this brick as a flash memory so i could just put the bootloader back?and yes i have put a g3 rom on my g4....and it makes me feel like an idiot...can't i just jump start the thing into the bootloader?(T-Mobile_UK_2.19.11_Radinly - this is what i flashed)
xardas_90 said:
well i've heard something of leaving it 24 hours without the battery and shoking the battery but no luck so far...isn't there any program that would recognize this brick as a flash memory so i could just put the bootloader back?and yes i have put a g3 rom on my g4....and it makes me feel like an idiot...can't i just jump start the thing into the bootloader?(T-Mobile_UK_2.19.11_Radinly - this is what i flashed)
Click to expand...
Click to collapse
Are you sure it was T-Mobile_UK_2.19.11_Radio only which you flashed and not the Button's Rom 1.05 ? coz flashing any Radio rom will not Brick any phone,regardless it being a G3 or G4,coz it doesn't include any IPL/SPL (Bootloaders) in it,its safe to flash to any G3 or G4 phone.
But what about you said it boots up to splash screen with a 'Beer Mug' on it,coz only Button's Rom splash screen displays a Beer Mug on it.
i'm certain this is what i flashed...and it was a beer mug(at least half of it) now it doesn't do anything...after i removed the battery it died
Could it be the battery?????
xardas_90 said:
i'm certain this is what i flashed...and it was a beer mug(at least half of it) now it doesn't do anything...after i removed the battery it died
Could it be the battery?????
Click to expand...
Click to collapse
Strange !!!
A Radio Rom never flashes any splash screen and it never displays any splash screen,especially a Beer Mug splash screen,you must have been mistaken and downloaded and flashed the Button's Rom 1,05,which has G3 IPL/SPL in it,and now its Bricked,nothing can be done with it to revive,except replacement of the 'DOC Chip' (M-System Flash Chip),which I'm afraid is not possible by anybody other then the manufacturer/vendor of the device.
just found out that in the directory named T-Mobile_UK_2.19.11_Radinly was CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE....did i brick it?...and how much would it cost to change that chip?...any place i could order another motherboard? maybe it's another way to do it...maybe someone does know how to use JTAG...give me some advice please...
xardas_90 said:
just found out that in the directory named T-Mobile_UK_2.19.11_Radinly was CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE....did i brick it?...and how much would it cost to change that chip?...any place i could order another motherboard? maybe it's another way to do it...maybe someone does know how to use JTAG...give me some advice please...
Click to expand...
Click to collapse
!
YUP !!! there it is,I was correct, its Button's Rom 1.05.
Well,yes ! its "BRICKED"
Only,manufacturer/vendor can provide you the motherboard or tell you the exact cost of it,or you can try the Ebay if they have it or can provide it.
Secondly,its still not known or if anyone can revive it through 'JTAG' ,guys here have been working on it,but were not successful and stopped trying it,you can have further info on it by checking out this link or 'Search' through google.
http://forum.xda-developers.com/showthread.php?t=274766
one more question and that's all...will the orange service or repair center notice that i've been "playing" with the device?maybe with a little luck they will replace it..or replace the motherboard :-S...thank you o much for helping
well....to all the readers of this post...i didn't manage to revive it through any method and decided to send it to the provider repair center...i have sent a message to caesar54 who managed to revive his wizard using jtag and waiting for a reply....IMPORTANT : DO NOT FLASH YOUR G4 DEVICE WITH A G3 ROM IT WILL BRICK YOUR PDA (I JUST FOUD OUT THE HARD WAY) SO REMEMBER..IF YOU DON'T KNOW WHAT YOU ARE DOING....DONT DO IT...i will post updates on what i have done with mine if someone intersted...
xardas_90 said:
well....to all the readers of this post...i didn't manage to revive it through any method and decided to send it to the provider repair center...i have sent a message to caesar54 who managed to revive his wizard using jtag and waiting for a reply....IMPORTANT : DO NOT FLASH YOUR G4 DEVICE WITH A G3 ROM IT WILL BRICK YOUR PDA (I JUST FOUD OUT THE HARD WAY) SO REMEMBER..IF YOU DON'T KNOW WHAT YOU ARE DOING....DONT DO IT...i will post updates on what i have done with mine if someone intersted...
Click to expand...
Click to collapse
Wish you a very goodluck there ! hope you get it working
thank you very much zabardast....i went to the orange shop where i was instructed by someone "high ranked" and someone over there told me that they have a tool that writes software even when the phone is dead...probably through a service cable or something...they said it would be back in 2 weeks maximum...and i will be informed of the price of the repair wich i will post (including my decision) anyway agan "DO NOT FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING"...hope it will get it back after 1 week functionally and cheap...i will search other forums and find posible solutions that i will post...till' then...good luck and work safe
until my phone comes back repaired or not i'm searching for an alternative...does anyone have a wizarrd to sell?preferably a broken one...broken display or something...but with the mainboard intact?
hello xardas_90
i have a recently bricked wizard (xda mini s)
now we are working on finding the jtag test points on the main board to reflash the
bricked 1 , so i am glad if u join us in thread (( Dead WIZARD Never! Let's REVIVE ))
to share info.s and to reach our goal . please join us
well when the board comes back be sure i'll help...but there would be another soluution...we could find a site or store that sell DOC chips...the rest is simple...we just need that chip...i'll search other forums for wizard jatg points...i really like your initiative...
There Is Hope
1.Se poate scrie bootloader prin JTAG
2.Nu exista nici un DOC cip.
3.Nu va putem furniza informatii gratuite service pe mail incercati pe www.flashgsm.ro/forum
----- Original Message -----
From: Rebirth A.D.
To: office
Sent: Friday, May 02, 2008 9:17 PM
Subject: Re: reparatie
aveti cumva DOC cipul care contine bootloaderul?sau o placa de baza second hand?...sunt din ploiesti si nu pot veni in bucuresti momentan...nu se poate scrie bootloaderul prin JTAG?multumesc pentru reply si astept un raspuns
Translation : Original message : do you have the DOC chip that contains the bootloader?i'm from ploiesti and i can't come ti bucharest for the moment....can't we write the bootloader through JTAG? Thank you for the reply and i'm waiting for your answer...
Answer
1 - IT CAN BE WRITTEN THROUGH JTAG
2-no doc chip
3- use out forum because we can't tell you how to repair your phone free through e-mail
a fiend of mine wich works at a repair center said he could discover JTAG points but omly with a board that is functional...anyone out there willing to sacrifice or sell?i'll post news on JTAG
so it is a good news , that guy could help , keep trying with me.............
Where r u xardas_90 ??!
any news about ur device , jtag
nothing
nothing new....ssince i don't have a functional mainboard...nobody can tell me the jtag points....still waiting for my device to come back from the provider...i'm waiting for 2 weeks...
Hi all,
I have a HTC Touch Dual on Vodafone (Spain) and of course, everything is in Spanish.
Because I am English I thought I would be clever and Flash an English ROM (TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe) .
The phone is SIM unlocked. I didn't think I would need to do anything else so I started to Flash the ROM. It got to about 4% and then it stopped and I got "Invalid Vendor ID...Ver3 - NJML5567..HUEbc07<NJM5561*" or something like that.
Tried to recover the situation with the Flash program but nothing.
I removed the battery and now it starts up with the Bootloader colour bars.
The only way I can start the phone is by using MTTY and command "boot".
Looks like WINDOWS MOBILE (spanish) program is still intact but I've upset the autoload part of the system.
All I want is an English Flash. Can anyone give me some help.
A step by Step would be great because I'm new to all this.
Do I need to CID Unlock? Do I need to run those other little programs called: "sspl-1[1].16-nike"....and "hardspl-1[1].16-nike" It's a 20 key model...will that make any difference?
ROM Model: NIKI 100
ROM Version is: 1.31.164.09
Radio Version: 1.58.16.27
Just want English Phone (sob sob) Can anyone please help? Don't want to end up with a Spanish Brick !!!!!!!!
Tony (frustrated in Spain)
keeezy said:
Hi all,
I have a HTC Touch Dual on Vodafone (Spain) and of course, everything is in Spanish.
Because I am English I thought I would be clever and Flash an English ROM (TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe) .
The phone is SIM unlocked. I didn't think I would need to do anything else so I started to Flash the ROM. It got to about 4% and then it stopped and I got "Invalid Vendor ID...Ver3 - NJML5567..HUEbc07<NJM5561*" or something like that.
Tried to recover the situation with the Flash program but nothing.
I removed the battery and now it starts up with the Bootloader colour bars.
The only way I can start the phone is by using MTTY and command "boot".
Looks like WINDOWS MOBILE (spanish) program is still intact but I've upset the autoload part of the system.
All I want is an English Flash. Can anyone give me some help.
A step by Step would be great because I'm new to all this.
Do I need to CID Unlock? Do I need to run those other little programs called: "sspl-1[1].16-nike"....and "hardspl-1[1].16-nike" It's a 20 key model...will that make any difference?
ROM Model: NIKI 100
ROM Version is: 1.31.164.09
Radio Version: 1.58.16.27
Just want English Phone (sob sob) Can anyone please help? Don't want to end up with a Spanish Brick !!!!!!!!
Tony (frustrated in Spain)
Click to expand...
Click to collapse
Hello you can copy sspl-1 to you phone and do that the guy wrote ind the tread when you only will do that to flash the rom ones, hardspl is when you will try more that 1 rom
My suggetion is to read the wiki and any stickies on flashing with your device there is where you will get step by step instructions. If that doesnt give you your solution then is when you are in trouble, and need to post something about it.
sorry if it sounds rude but try these
http://forum.xda-developers.com/showthread.php?t=375967
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=&f=404
Thanks knudsen81 for the sspl-1 and hardspl explanations.
And thanks thakidc about the reading up thing, which I'm doing now.
Just one more question....Am I to understand that the phone needs to be CID unlocked before it can be Flashed ? or am I on the wrong track?
I guess while I've got the Bootloader colour bars...I haven't got a brick....right?
Hey wait a minute........that's 2 questions !!!! Sorry.
Thanks for all the help so far.
Tony
Great.............
Managed to Flash the ROM.
A careful step at a time seems to be the way.
Although it is a little nerve racking watching the percentage marker creeping along...and then stopping...and then starting again...whew, it got to 100%
Happy now...
Thanks everyone.
Tony
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs
Hi Folks,
Newby here, (HD2 with T-mobile- UK).
Have had my phone since November 2009 and recently decided to update the ROM to 3.14.110.1 from the HTC website.
Since then, I have had some problems.
!. Most of the time, I cannot see who is calling me. The screen remains either off or displays anything other than the caller ID
2. The handset has become sensitive, it will sometimes dial a number when placed down. This did not happen prior to the ROM update.
3. sometimes the handset is non-responsive and requires serveral taps to make it respond or has to be switched off and on to make it work.
it is using Windows 6.5
HTC support asked me to do a reset but this did not solve the problem.
Would be grateful for any assistance with this situation.
Thanks in adcvance
ulticomp said:
Hi Folks,
Newby here, (HD2 with T-mobile- UK).
Have had my phone since November 2009 and recently decided to update the ROM to 3.14.110.1 from the HTC website.
Since then, I have had some problems.
!. Most of the time, I cannot see who is calling me. The screen remains either off or displays anything other than the caller ID
2. The handset has become sensitive, it will sometimes dial a number when placed down. This did not happen prior to the ROM update.
3. sometimes the handset is non-responsive and requires serveral taps to make it respond or has to be switched off and on to make it work.
it is using Windows 6.5
HTC support asked me to do a reset but this did not solve the problem.
Would be grateful for any assistance with this situation.
Thanks in adcvance
Click to expand...
Click to collapse
Maybe there is a bug in the ROM
What do you want to do? Going back to older ROM?
If yes, you just downloaded the previous ROM and flash it.
Or else, you can try a Custom ROM
ulticomp said:
Hi Folks,
Newby here, (HD2 with T-mobile- UK).
Have had my phone since November 2009 and recently decided to update the ROM to 3.14.110.1 from the HTC website.
Since then, I have had some problems.
!. Most of the time, I cannot see who is calling me. The screen remains either off or displays anything other than the caller ID
2. The handset has become sensitive, it will sometimes dial a number when placed down. This did not happen prior to the ROM update.
3. sometimes the handset is non-responsive and requires serveral taps to make it respond or has to be switched off and on to make it work.
it is using Windows 6.5
HTC support asked me to do a reset but this did not solve the problem.
Would be grateful for any assistance with this situation.
Thanks in adcvance
Click to expand...
Click to collapse
I know you said you flashed an official ROM from HTC, but boot into bootloader by holding the volume down button down nwhile powering on your HD2 and see what SPL version you have. It should be SPL 3.03.0000, if it is not you need to download HSPL 4 and use it to update your SPL to 3.03.0000. Click on the guide in my sig to get to a link to download HSPL 4 and instructions on how to flash it.
Thanks T-Macgnolia, I ahve tried what you said and it is SPL 3.03.0000.
however, after I had checked, I could not do anything on the phone so in the end I removed the battery and then replaced it.
Since that, the phone is no longer displaying any calls made or recieved. What is happening to me?
Please Help!
What I want to do is to use the best ROM avaialble, be it the one I recently installed or return to the original.
Do I still need to flash it?
Please advice.
Thanks again.
Did you download the ROM from the official HTC site using your own phone's serial number?
If you did then that should be the right ROM for your phone, that only leaves two options, either the ROM has become corrupt - in which case a reflash may solve the issues, or you have a hardware fault.
A reflash is your best option, but first delete the ROM you downloaded on your PC and grab a new copy, just in case.
From what I've read a Task29 may help first, but I can't advise you on this as I've never used it
Thanks boomboomer, i did download from the official site with my serial number. So I will try out the porcess again as you suggest. Also, please tell me where I can find out more about "Task29".
Thanks again!
The search tool is very easy to use, or try this thread:
http://forum.xda-developers.com/showthread.php?t=1018427&highlight=task+29