Has anybody found a credit card enabled Wizard case?
The closest I've seen is the Krusell case - www.krusell.se - but this is just too small...
This is seriously hampering my impulse gadget buying!
strongp said:
Has anybody found a credit card enabled Wizard case?
The closest I've seen is the Krusell case - www.krusell.se - but this is just too small...
This is seriously hampering my impulse gadget buying!
Click to expand...
Click to collapse
Not a good idea. If you have the credit cards next to the PDA the GSM transmitter could erase the magnetic stripe.
Not forgetting that the Wizard uses a magnet for rotating the screen...
TheBrit said:
strongp said:
Has anybody found a credit card enabled Wizard case?
The closest I've seen is the Krusell case - www.krusell.se - but this is just too small...
This is seriously hampering my impulse gadget buying!
Click to expand...
Click to collapse
Not a good idea. If you have the credit cards next to the PDA the GSM transmitter could erase the magnetic stripe.
Click to expand...
Click to collapse
Hmmm...I've been using an XDA2 for 2 years with credit cards in a Krusell case. Have not had any probs with demag of cards from GSM transmitter of XDA2...so why would this one?
Where is the magnet situated for landscape?
This too is the thing which is holding up my switch from xda2 to Wizard...hope somebody makes a case with that in mind.
To anyone in or out of the US, we have a show called mythbusters on the discovery/learning channel. They did a test on credit cards and found that it takes quite a bit to clear/damage the data on the mag strip (the new credit cards especially (ya know, anything past 1990)). Hope it helps!
the only magnetic strip i ever had that got erased by my phone was a room key at a hostel in Melbourne. Most hotels throw them away after one use, but this cheap hostel reused them to keep costs down and constant reprogramming made them tempermental. If I forgot and shoved that key into my pocket with my T28 I would have to get it reprogrammed everytime.
I had a magentic money clip which ate credit card strips if I dropped it onto the wrong pocket. Mind you, that was a long time ago, and it was a strong magent. I've always kept credit cards in the case next to my other XDAs without problems.
I've been using the Krussell case for the Wizard for a couple of months now, and it's great.
A really good clip and release mechanism, well crafted, and it now takes 3 credit cards after a bit of stretching. Easily the best case I've ever had.
I have had cards (lotsa cards with mag strip) in my wallet which also have a contact-less card. If you know the workings behind the contact-less card, you would know that there is a magnetic field on the reader that gives your card the power to process and send the signal. I think that would be much stronger than a mobile phone signal and also the freq would be much lower, hence easier to disstort any magnectic strip. However, I have been using the card for 2 years+ everyday and I don't have problems with my creditcards.
BTW, I've did a test on floppy disk on those magnetic telephone book (those that use two pieces of magnet as cover). And it seems impossible to erase the stuff on the disk. I guess you need a much stronger magnet.
Hello. I have used my wizard intensely for about an year or so and I am sad to say its looks are awfull now(i forgot to mention I work in sales and I have a very strong relationship with my phone). As I am from Bucharest, it is very hard for me to find a genuine original case, and not an aluminium or leather protective one. Is there any chance I could find one of those cases and what would the costs be?
Thanx
mihaitranca said:
Hello. I have used my wizard intensely for about an year or so and I am sad to say its looks are awfull now(i forgot to mention I work in sales and I have a very strong relationship with my phone). As I am from Bucharest, it is very hard for me to find a genuine original case, and not an aluminium or leather protective one. Is there any chance I could find one of those cases and what would the costs be?
Thanx
Click to expand...
Click to collapse
found mine @
www.wirelessground.com
Credit card mag strip
Mythbusters proved that simple magnets (even neo) eel skin and a lot more things wont affect a magnetic strip. They ended up using a really strong electro magnet and only partially damaged the strip.
Here's one I wouldn't mind parting with.
This one works with the Cingular 8125
It has 2 SD card slots and 2 Credit Card slots on each side of the wallet section.
The only flaw in it is a rip on the side. But it still will function normally, to hold the device.
I would sell it to you for $10.00 US Dollars plus S/H.
If your interested, let me know.
bholl777
I recently sold my shift I loved the device but just didn't fit my needs. But i still support the community.
I guess all our requests to the company paid off. I know one of our fellow forum members lives near the company in California and Proclip told him they had no plans to make one - They lied to you.
I just got an email from proclip and I double checked the website. They sure do have them.
$29.99 or $39.99 for the holder plus the cost of mount for your car. It looks like they have two different options fixed or with a modle with a adjustable tilt.
copy of the email
Dear Customer,
The ProClip Device Holders for the HTC Shift are now in stock and available for online ordering at www.proclipusa.com:
Item # 848337 - Standard Holder
Item # 848837 - Holder with Tilt Swivel
Thank you for your interest in our products and have a terrific day!
Best Regards,
ProClip USA Customer Service
Toll Free: +1 800-296-3212
Fax: +1 608-838-8949
Email: [email protected]
Web: www.proclipusa.com
I am on my way to pick one up right now. They told me a month ago that they were not going to make one. Guess they changed their mind. I will post pic's as soon as I have it installed.
i orderd one
will post pics once i get it
thanks for the info ive been waiting for this one FOREVER !!!!!
Photos of ProClip Mount for the Shift
Here is what my new ProClip mount looks like in my BMW. It was an easy install as it is with everything from ProClip. The only drawback is that they did not do anything for the keyboard. You can open the keyboard but it then gets pretty sloppy in the mount. Still, for under $40 US, not a bad deal. Enjoy the pics.
PROBLEMS PROBLEMS !!
ATTENTION : THIS CARHOLDER OF PRO-CLIP HAS A SERIOUS DESIGN FLAW !!:
If you try and use this holder with the Shift, and the shift has an SD Card inserted, youre pretty much f******
There's no way the shift will slide in easily because the SD card is 1 millimeter wider than the shift, and about 0,5 millimeter wider than the power on/off slider.
Inserting the shift in the holder doesn't work well with SD inserted, one has to press the SD firmly to let the Shift slide in. When slided in, the SD is under pressure from the side of the holder.
When taking the shift out, the SD card is ejected like a ejection seat in a F-22 !! It looks funny and if the holder wasn't 40 euro, I would be laughing my ass off.
It's clear that during design phase, they forgot to enter a SD card.
I will show and post the modification manual later on today, but as for now this holder is totally useless if you use a Shift with SD card.
http://www.ebay.com/itm/Hot-Selling...ccessories&hash=item27c141404b#ht_2847wt_1037
Class 10 16GB
real?
I wouldn't trust it.
Not just because it's too cheap to sound legit, but also because of the shipping time estimate: 10 to 40 days. If the card doesn't arrive after 40 days your only option is eBay/PayPal buyer protection, which won't help you if the seller sends a knockoff SD card.
Never buy anything off eBay if the max. shipping time is longer than the time you get from your credit card company to reverse the charge. This is usually a month, so I'd never accept a delivery time of more than three weeks.
Also have a look at the seller feedback. Lots of positive comments about $2 cables (an easy way to build up eBay cred for a throwaway account), but so far no feedback at all on SD cards.
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
Looks okay but I prefer the imagnet...
I love ProClip's holders. You select the custom mount for your car, and then the custom mount for you phone. I've owned several brands of custom clips throughout the years, and I've never been happier.
https://www.proclipusa.com/
Doug
After having tried several car mounts, I have come to a point where I do not want any snake-type car mount - the ones with extensible, adjustable arm ... with time, and car vibrations, they do not really stick in place, and dangle around a little bit.
Lately I happened to pick a glass screen cover from xtreme guard where they offered promotional Flozu car mount + a 90% discount coupon ... at the end, it was really a deal for the both of them..
I have been using the flozu mount since around 1 month now, very solid, top notch. secure suction locking mechanism, seems to hold much stronger to the windshield than my previous ones. The absense of the extensible arm made it VERY stable in terms of vibration and permanent "dangle" . It holds my note 3 firmly (not strongly) between its pliers, and manipulating the plier to open it is very easy - not complicated spring-loaded buttons to press - which get worse with time - which you see on other models. Seriously recommend.
Here is the link to the Flozu mount:
http://www.xtremeguard.com/product-p/car-mount-flozu.htm
mine came today (Flozu mount), fairly quick standard shipping delivery. I expect it'll do a very good job. At first I thought it was rather pricey ($49.99 USD) but then the 75% off discount code appeared -- can't find anything decent in the stores for $12.75! easy to mount to the windshield, nice firm grip of my unprotected S3 (countdown to upgrade: 3days). I'll update after having used it awhile.
Rick
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Airframe+
I use the Kenu Airframe+. Mounts in the vent and holds really well. Also works as a kick stand since it's small and you can carry it around with you with you're not in the car.
Best mounting system I've ever owned, but it's not cheap.
https://www.proclipusa.com/
Doug
I use this holder for my Note 3. Its been good for a year now and cheap.
Can twist it for landscape or portrait and can hold any phone as most of us use cases on our phones it will fit any phone... One problem is your car will need to have strong vents and not too deep directors inside as the back will need to grip onto those.
EBay number item number 311275702025 check can't post link as I'm a new member.
Masik v6.0 lollipop Note 3 N9005
I just bought my second one of these. Super sturdy and the suction cup has a gooey material on it that literally will stick to just about anything!
second this!
ickensai said:
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Click to expand...
Click to collapse
I've had this mount for around 2 years and I love it! 2 of my friends got it after they saw mine.
I hardly ever use my CD changer but it still functions normally if you do.
In my car it puts the phone in the perfect place. Here's a few pictures of it in my car so you know how it looks.
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
ProClip
I've used ProClip mounts in two different trucks with three different phones. I wouldn't use anything else. You buy the mount in two pieces - one piece for the vehicle, that's specific to the vehicle, and where in the vehicle you want to mount the phone. It has tabs that insert into the existing seams of your car's interior. No drilling, no bolts to unscrew, a very clean installation. The other piece you buy for the phone (or tablet, or GPS unit). They have many phone mounts each designed to fit a specific phone - as long as you don't have a case on it. They also have phone mounts that are more universal in nature for those that use a case. Any of the phone mounts will attach to any of the vehicle mounts.
It's expensive - each piece has cost me between $35 and $40, so around $75 when you first buy the system. But if you get a new phone, you only have to replace the phone mount. If you get a new car, you only have to replace the vehicle mount.
It's a premium mount. It holds your phone firmly in place, and it's a clean , professional looking installation. I think it's worth the cost.
For my Note 3, I've been using the Exogear ExoMount Touch -http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html . The reusable adhesive pad works surprisingly well and it is a cinch putting in and taking out my Note 3, even in my Urban Armor Gear case. Simply put the phone into the mount and the arms snap close around the device, and to remove I just press the release buttons. Easy in, easy out.
The one issue I had was one one occasion the tightening nut cracking, but I think that was as a result of me carelessly over-tightening on one occasion. The company quickly sent me a free replacement, however.
Journyman16 said:
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
Click to expand...
Click to collapse
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Ps2004 said:
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Click to expand...
Click to collapse
Not sure where you are, but mine's been through some pretty hot days with the car parked in the sun and no problems. Silicon shouldn't melt - it melts around 1400ºC - if your car is getting that hot you'd have to be approaching the Sun I think. Maybe yours was plastic?
Just check my history on dx.com, and yes, it seems you were right, it was PVC, must say I didn't check that as it said made for car dashboard.
Anyway, just be careful what you buy.
Oeps said:
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
Click to expand...
Click to collapse
I second the RAM mounts. I use the cupholder version, then the ball arm, and the X clip. I can even swap out the attachment with my medium/large RAM holder that fits a nexus 7, or my large holder that fits an ipad air. Ram mounts aren't cheap, but they're versatile and built to last. I'll never need to buy another mount system again, unless I find a really oddball device in the future and need a new attachment for the Ram.
I finally found the perfect mount for my taste. Universal + with charge function.
http://www.1a-pc-shop.de/shop/hr-30417-universal-smartphone-charging-dock.html
You cand adjust the x and the z axis of the power connector holder at the bottom. There are 5 adapters included for different cables. Works very well with my usb 3.0 car charger. Silicon case no problem.
Now I just slide in the Note 3 and it charges. And this should work for many devices to come.
Hi guys,
I purchased my U ultra in Taiwan about 3 weeks ago. My cousin (who lives there) sent on a gift pack that I received as a result of the purchase of the phone.
It was presented nicely in a big box, (no pics cuz I asked him to dump it for shipping's sake).
Here are the items:
https://goo.gl/photos/iJAfArr95rLYsdkv8
https://goo.gl/photos/4TKmQApML5AGyhis5
Case is made well, smells of rich leather. Has multiple card slots inside, with 2 larger full length slits, for folded bills, or receipts. On the rear of the case is another card slot, perfect for travel cards, or a tap and pay credit card.
https://goo.gl/photos/M9n51Ku7Kw5Yzp1K8
Best of the three is the powerbank imo. Supports QC 3.0.
Very nice! I like that power bank.
is there anyway to get those for the international version I really wanna get both lol idc how much it is as long as its below 60$ case I just prefer HTC man equipment with my phone
Got mine from HK - got that pack too. Key chain, power bank with usb-A to usb-C cable & the leather flip case