Related
Please help me!
I screwed my MDA Vario II. I used HTC universal sim unlocker and I haven’t got radio. I know I was a craze.
No GSM, no cid and no imei. The pda is working good.
I vas very happy when I find this site :
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems.
I made this:
USB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>set 1e1
USB>erase a0040000 c80000
HTCST ÚČŇHTCEUSB>erase a0cc0000 c80000
HTCST ÚČŇHTCEUSB>erase a1940000 640000
HTCST ÚČŇHTCEUSB>set 1e 0
USB>
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Please help me
Please can a expert check this!?
I found this with the search option.... can someone check this....
Its written for the Tytn and not for the Vario II, i'm not sure but i thought that the english Vario II has a 1.06 bootloader!! Then you are stuck, beacause the file who degrade your bootloader to 1.04 isnt availleble anymore. Maybe one of the guys here can share it with you?!
======================================================
- Take the battery out of your TyTN and leave it out several minutes
- Disable USB-connection in Active-Sync
- Reboot your Computer
- Replace the battery and put your TyTN in the bootloader
- Try to load the ROM found here:
ftp://xda:[email protected]/RUU120_172125_Qtek_WWE_R11400_Shipping.exe
- Keep trying till you get just past the erasing part, then you will get an error-message and are asked to reset your device with the stylus
- Reset your phone and put it back in the bootloader mode
- Install any Hermes ROM you like, no matter what CID if you have bootloader 1.04
lacika said:
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Click to expand...
Click to collapse
Can you attach a USB monitor capture of what happens when you try to:
a) flash a rom
b) flash a radio rom
Do both things starting from bootloader and with activesync disabled.
Same Problem
I have the same problem
My PDA keeps comming back in the bootloader screen.
When 1 try to update (its a unlockes pda), the upload stops at 1%
Is there a way to erease the PDA ?
Thanks
pimmmm said:
I have the same problem
Click to expand...
Click to collapse
I have the same questions.
Can't do anyithing if you don't attach a USB capture of the process. See this page for instructions: common upgrade problems
smarty77 said:
I found this with the search option.... can someone check this....
Its written for the Tytn and not for the Vario II, i'm not sure but i thought that the english Vario II has a 1.06 bootloader!! Then you are stuck, beacause the file who degrade your bootloader to 1.04 isnt availleble anymore. Maybe one of the guys here can share it with you?!
======================================================
Click to expand...
Click to collapse
HI!
Thank You for your answer. I made yours tip, but not was good.
First I to try smarty77 tip. I used RUU120_172125_Qtek_WWE_R11400_Shipping. Its function. After I’d like rom upgrade. This doesn’t was good (invalid vendor).
Second I to try clearing with mtty.exe.
The situation same, the phone doesn’t work.
Sorry my bad English.
pof said:
Can you attach a USB monitor capture of what happens when you try to:
a) flash a rom
b) flash a radio rom
Do both things starting from bootloader and with activesync disabled.
Click to expand...
Click to collapse
HI!
Thank You for your answer. I made yours tip, but not was good.
First I to try smarty77 tip. I used RUU120_172125_Qtek_WWE_R11400_Shipping. Its function. After I’d like rom upgrade. This doesn’t was good (invalid vendor).
Second I to try clearing with mtty.exe.
The situation same, the phone doesn’t work.
Sorry my bad English.
Just seen your capture but it's not good.. you made a "basic" capture which shows nothing important, please repeat the process again, but this time read point 6:
In the upper part there are two tabs: basic and complete. Click on "Complete".
I cannot help unless I have a complete capture to see the problem.
pof said:
Just seen your capture but it's not good.. you made a "basic" capture which shows nothing important, please repeat the process again, but this time read point 6:
In the upper part there are two tabs: basic and complete. Click on "Complete".
I cannot help unless I have a complete capture to see the problem.
Click to expand...
Click to collapse
HI POF!
Thank you four your help.
It is a new captured files.
Please help me. You are a last chance, for my phones.
Lacika
@lacika:
When checking the seclevel (task 32 bootloader command) your phone replies:
Code:
CID: Wait interpreter timeout.
Level=FF
After that when checking the CID with 'info 2' your phone replies:
Code:
HTCS...?\0.?f..|HTCE
This should be something like T-MOB001 if you have a Vario II from UK, so the CID is screwed.
I can see from the output of 'info 3' that you're running bootloader 1.06.
Then you try to flash the 1.18.255.3 ROM from HTC, which has CID "QTEK_001", you won't be able to flash this image in your device with bootloader 1.06, even if the CID was not screwed you will always get an error (you need bootloader 1.04 to bypass CID checking, and you are in 1.06), the error you're getting from bootloader is:
Code:
CID not allow (255)
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
pof said:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04.
Click to expand...
Click to collapse
Err... I forgot that your IMEI is also screewed, probably imei-check unlocker will not work on your Hermes even if you provide them the right IMEI, because it will not be able to read the IMEI from your phone (will get the wait interpreter timeout too...). anyway... it costs 20GBP, give it a try!
pof said:
@lacika:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
Click to expand...
Click to collapse
Hi and thanks!
I’ve got one question. I use imei-check unlocker after I’ll got 1.04 bootloader?
Lacika
I tried that with my device before it got sent to service, I brought imei-check unlocker but as my imei was also corrupt it will not work, so I would not waste GDP 20 if you have corrupt imei.
They will not refund either becuase its your problem the imei is corrupt.
lacika said:
I use imei-check unlocker after I’ll got 1.04 bootloader?
Click to expand...
Click to collapse
No, imei-check unlocker will downgrade your bootloader, BUT as shark1 says, it will not work because your IMEI is corrupted and it will not be able to read it.
I guess the best would be to send the unit to the repair centre then...
pof said:
@lacika:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
Click to expand...
Click to collapse
Hi!
I’ve got a new problem.
I used a M3100v3cUnlock.exe program. This doesen’t read my imei number.
I don’t know how can I flash my bootloader.
Lacika
pof said:
No, imei-check unlocker will downgrade your bootloader, BUT as shark1 says, it will not work because your IMEI is corrupted and it will not be able to read it.
I guess the best would be to send the unit to the repair centre then...
Click to expand...
Click to collapse
I had the same problem! Send it to orange assistance.
lacika said:
I used a M3100v3cUnlock.exe program. This doesen’t read my imei number. I don’t know how can I flash my bootloader.
Click to expand...
Click to collapse
You can't, and your imei is screwed, the unlocker can't check it... so you should better send the unit to the repair centre as suggested.
pof said:
You can't, and your imei is screwed, the unlocker can't check it... so you should better send the unit to the repair centre as suggested.
Click to expand...
Click to collapse
HI!
I’ve got a last question.
It will a new procedure, program, with I can flashing my bootloader.
Lacika
Hi all,
I know this has been asked and answered lots of times, I have read all the wiki posts I could find, but still I'm not 100% sure that I understand correctly, hence this question.
I have a Dopod 838 Pro (Hermes) which I have SuperCID'ed and loaded with bootloader 1.09.
My ppc gets stuck on the windows mobile screen, and in addition I can see in the HTC subsplash screen the "NO GSM" indicator for a flick of a second.
I can go into bootloader and connect with mtty.
In another thread (and also in the wiki), it is suggested that the only way to get my machine back, is first to downgrade to SPL 1.04, and the only way to do this since I'm at 1.09 and no windows, is to purchase the IMEI-CHECK tool .
Am I correct in understanding this? or is there another way?
Thanks for any and all help.
Chris
No, I think you quit reading a bit soon.
With the new unlocker v3 and Des' SSPL flashing method, you no longer need to downgrade from 1.09 to flash anything. Simply find the newest version of the ROM and Radio you are trying to load and run the exe. Hard to believe, but it's really that easy.
Hi and thanks for the reply,
will the v3 unlocker work even if I cant boot my ppc and so I cant connect with activesync?
The only thing I can do, is boot into bootloader on the ppc and connect using the mtty tool.
Can I still use the method you suggest?
Thanks again,
Chris
T-mobile unlocker bootloader 1.09
chrisvor said:
Hi and thanks for the reply,
will the v3 unlocker work even if I cant boot my ppc and so I cant connect with activesync?
The only thing I can do, is boot into bootloader on the ppc and connect using the mtty tool.
Can I still use the method you suggest?
Thanks again,
Chris
Click to expand...
Click to collapse
Im having the same problem
Hi X01HT Rock....
can I ask u a favor? If you find a solution please PM me... I will do the same
thanks
Chris
you can't use the unlocker unless you can copy it to the device and run it from there.
from xda wiki
Problem 5: Device shows NO GSM when booting
* The radio stack is screwed, you don't get GSM signal and the phone says unknown SIM status
* Device won't start after trying to unlock it with HTC Universal Unlocker (HTC_Uni_SIM_Unlock_v1)
Here is how to fix it:
1. Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2. Put your Hermes in bootloader mode
3. Connect device to computer using USB cable.
4. Open mtty.exe and select USB port, then connect.
5. Hit enter twice, you will see the "USB>" prompt.
6.
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7. Reset your phone and put it back in bootloader mode
Click to expand...
Click to collapse
now copy unlock v3 to your phone, and run on the phone.
download radio 1.34 and run on your pc, while your device and pc is in activesync mode.
I believe all of this is in the wiki.
lpsi2000 said:
I believe all of this is in the wiki.
Click to expand...
Click to collapse
yeah, but the guy's device is locked with a 1.09 bootloader. we might need POF's help here.
please PLEASE guys, i need your help here (POF are you reading this?)
My machine was made SuperCID using v2a before all this sh*t happened and it was running smoothly.
It now seems that some of the mtty commands I read and tried to apply resulted in the SuperCID status to go away and now it's *scrambled* (info 2 results in "HTCSF kEØ(HTCE"). So now I cannot flash ANY rom into it even if I could.
I get to the bootloader (SPL 1.09) and also up to the windows mobile splash screen.
Also at the HTC subsplash I can see the "No GSM" msg for a fraction of a second.
Please help me unbrick this baby. I can't afford to buy another one
cant run the mtty that way
I have tried to run the password and every thing it I am having some problems with the communication
HTCST ÚÈÒHTCEUSB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>set 1e 1
USB>erase a040000 c80000
HTCST ÚÈÒHTCEUSB>erase a0cc0000 c80000
HTCST ÚÈÒHTCEUSB>erase a01940000 640000
HTCST ÚÈÒHTCEUSB>set 1e 0
USB>
this is what happens then I try to rest the phone but it just goes back to whatit was doing.
I think that I have a language problem here.
chrisvor said:
My machine was made SuperCID using v2a before all this sh*t happened and it was running smoothly.
Click to expand...
Click to collapse
SuperCID unlocker v2a would not have worked on SPL 1.09. It might have said that unlocked successfully, but it wont have unlocked. Only unlocker 3 will unlock a SPL 1.09 phone. You'll have to keep hammering on the "bricked hermes" sticky. Someone will get round to helping you in a day or two.
I put this in the wrong place and cannot delete. Sorry for the misspost.
Hello,
I have seen on the Universal thread a way to completly format the device. After that lot of people who were stuck in windows mobile screen have recovered their device.
I dont know if it is working with hermes.
http://forum.xda-developers.com/showthread.php?t=289325
X01HT Rock said:
Im having the same problem
Click to expand...
Click to collapse
Me too....!!!! Can't solve this problem
.VIBE said:
you can't use the unlocker unless you can copy it to the device and run it from there.
from xda wiki
now copy unlock v3 to your phone, and run on the phone.
download radio 1.34 and run on your pc, while your device and pc is in activesync mode.
Click to expand...
Click to collapse
I did what you said before but can't solve the problem
.VIBE said:
SuperCID unlocker v2a would not have worked on SPL 1.09. It might have said that unlocked successfully, but it wont have unlocked. Only unlocker 3 will unlock a SPL 1.09 phone. You'll have to keep hammering on the "bricked hermes" sticky. Someone will get round to helping you in a day or two.
Click to expand...
Click to collapse
@.VIBE:
My original SPL at the time when I applied v2a unlocker was 1.01, and v2a unlocked it, I verified it with "info 2" in mtty just after, and also after all this mess started.
Something I did while trying to get out of this mess, changed my SuperCID status and corrupted it.
Is there a way to make it superCID again if the only thing I can connect with is mtty?
Thanks
Chris
You guys with bricked phones need to carefully read and understand ALL of the "dead hermes? corrupted radio? Post comments here" sticky!
Everything that POF currently knows on unbricking your device is in there also Superdave has some help for those who can get into KITL mode. Even then not every brick is recoverable at the moment, but you need to spend some time reading to find out!!
I've noticed that POF's not as quick as he used to be in replying to these kind of threads, I surmise he could be a little fed up with repeating the same thing over and over again, but I could be wrong.
Best of luck to you and my advice at the moment to anybody else coming across this is to SuperCID your phone and always try to keep your bootloader at SPL 1.04 (upgrade using mtty) as it makes recovering from bricked phones much easier.
Im having the same problem
There Is A Way Of Downgrading From 109.
Search Google For Downgrade_SPL Then Do This.
1. Go to Google, search for DownGrade_SPL.rar
2. Connect your tytn to PC and wait until activesync completed.
3. Run M3100v3cUnlock.exe. Once you see checking device.... in DOS box and whilte screen on your tytn, close the program (Dos box) immedaitely.
4. Run ROMUpgradeUt.exe and follow the japanese wizard to complete the boot loader downgrade.
5. Reboot your tytn and then put it into bootloader mode agian, you should see SPL-1.04. Great!
Cheers
@Mousey
You need to be able to fully boot into the OS to connect to activesync and the phones described here can't. The only other way I know of downgrading from 1.09 to 1.04 is from KITL mode which not all ROMS have. Full details are in the sticky I mentioned earlier.
Hello all,
I got a friend of mine who came to me with a device-password locked Hermes, which password he cannot recall (actually his girlfriend...). I said I would be willing to give him a hand to unbrick the device. The problem is that I cannot install any ROM on the device, coz I got an error connection right after the screen goes white and the percentage count should normally start.
So I put the Herm in Bootloader (spl-1.06) and try to flash the OliPro Bootloader. The procedure goes correctly until the step where the upgrade itself should begin, counting from 0%... here, I got:
ERROR [262]: Update error: communication error.
I also tried to flash a ROM directly, but since my Bootloader is 1.06, I didn't find a CID match ROM, so it also failed. The Herm is now not bricked, but it stays at the password input screen, so cannot enter windows properly.
Any help on this?
Thanks,
Ionutz
Interesting since you are trying to go around something HTC probably did not want for people to go around due to security....
agovinoveritas said:
Interesting since you are trying to go around something HTC probably did not want for people to go around due to security....
Click to expand...
Click to collapse
yes, i grih you,and normally i wouldnt even try to do such thing, if it hadnt been for a friend of mine which i know.
besides i would like to learn more stuff about my Herm and this is one thing I havent seen discussed here, although i keep reading xda forums for such info.
just found the solution: i flashed another ROM with same CID since my BL was 1.06, but with BL 1.04. After that, I managed to flash any other ROM and automatically upgrade the SPL to 1.10 or 2.10 Oli accordingly.
If any of you interested and dont get the short explanation, PM me.
cheers,
Io, owner of 2 kicking TyTn's
BL 1.06 didnt allow devices with a different CID to be flashed,
eg: my TyTN had the CID: QTEK001 so i couldnt flash a ROM destined for a device with CID: VODAP001
But BL 1.04 had a bug where you COULD flash any ROM to the device regardless of the CID, the first attempt shows a vendor ID error, then try again and it will flash no problem.
The simplest way I would have got past the device security problem would have been a hard reset.
mrvanx said:
BL 1.06 didnt allow devices with a different CID to be flashed,
eg: my TyTN had the CID: QTEK001 so i couldnt flash a ROM destined for a device with CID: VODAP001
But BL 1.04 had a bug where you COULD flash any ROM to the device regardless of the CID, the first attempt shows a vendor ID error, then try again and it will flash no problem.
The simplest way I would have got past the device security problem would have been a hard reset.
Click to expand...
Click to collapse
I know the details about BL 1.04 vs 1.06, thats why I flashed a BL 1.04 ROM, but with the same CID QTEK_001, or smth.
I have to admit though that I never ever thought about doing a simple hard-reset. I guess it would have been to easy, I jumped to more complicate scenarios. Thanks for the help anyway, i gotta learn that.
Thanks mrvanx, glad I read down the whole thread to the part about a simple hard reset working. I lent my 8525 to a friend, thinking he might be interested in buying it, then he didn't have the money, and after I listed it on ebay today, I charged it up to flash to ATT stock, found it password locked, called my friend a few times just getting his voicemail, so tried flashing, and it said the Hermes wasn't connected to the PC...
I figured there would be a solution here at XDA..and POOF, like magic here it is!
So yes, all I had to do was a hard reset, tested and it works, and it was simple, so thanks again mrvanx, although this thread is very old, glad I found it LOL!
I can entry the 3 color level, use usb connect. Someone told me can flash with original rom, but I couldn't find it in FTP or HTC.COM. Hard reset is not possilbe to solve this problem.
cwmaster said:
I can entry the 3 color level, use usb connect. Someone told me can flash with original rom, but I couldn't find it in FTP or HTC.COM. Hard reset is not possilbe to solve this problem.
Click to expand...
Click to collapse
If you've CID unlocked the device with Olipro's unlocker then you should be able to flash any ROM, so long as it's for the correct device!
leoni1980 said:
If you've CID unlocked the device with Olipro's unlocker then you should be able to flash any ROM, so long as it's for the correct device!
Click to expand...
Click to collapse
Thank you for your responds, but the problem is I can't activesync with my PC, It means if I want get the CID unlocked, I must get the software can be used in Bootload( in 3 color level with USB line). But I could not find it. Another way is find the rom for HTC x7500(de), WM5 or WM6, same problem, I can't find them from internet or from the HTC.COM.
cwmaster said:
Thank you for your responds, but the problem is I can't activesync with my PC, It means if I want get the CID unlocked, I must get the software can be used in Bootload( in 3 color level with USB line). But I could not find it. Another way is find the rom for HTC x7500(de), WM5 or WM6, same problem, I can't find them from internet or from the HTC.COM.
Click to expand...
Click to collapse
Find a friend's xp (or even another vista) computer and use it. Surely you do have friends
victoradjei said:
Find a friend's xp (or even another vista) computer and use it. Surely you do have friends
Click to expand...
Click to collapse
I have done it by 5 PC
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
EricBr said:
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
Click to expand...
Click to collapse
There were four ROMs posted here some time ago. At least one of them didn't require the unit to be SPL / CID unlocked. Try to get hold of one of those - look in the Athena WM6 forum (where this should have been posted)
ROM
apd said:
There were four ROMs posted here some time ago. At least one of them didn't require the unit to be SPL / CID unlocked. Try to get hold of one of those - look in the Athena WM6 forum (where this should have been posted)
Click to expand...
Click to collapse
Thanks for reply.
I suppose you mean this four Rom's :
http://uploaded.de/?id=j2pv51 - ROM ver 2.20
for use with the athena_upgrade program
http://uploaded.de/?id=0v9mm1 - flasher for SuperCID devices only
works only for supercid devices
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
http://uploaded.de/?id=wbbw2u - T-MOB005 - version with spl,ipl and etc
works with CID T-MOB005 and SuperCid
As I understand my x7500 is not unlocked/superCid'ed and I need a ROM with exactly the same CID as on my device. Or am I far out ?
Or should I be able to use one of them even if the CID don't match ?
Thanks, Erik
EricBr said:
Thanks for reply.
I suppose you mean this four Rom's :
http://uploaded.de/?id=j2pv51 - ROM ver 2.20
for use with the athena_upgrade program
http://uploaded.de/?id=0v9mm1 - flasher for SuperCID devices only
works only for supercid devices
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
http://uploaded.de/?id=wbbw2u - T-MOB005 - version with spl,ipl and etc
works with CID T-MOB005 and SuperCid
As I understand my x7500 is not unlocked/superCid'ed and I need a ROM with exactly the same CID as on my device. Or am I far out ?
Or should I be able to use one of them even if the CID don't match ?
Thanks, Erik
Click to expand...
Click to collapse
I think you need this one:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
mackaby007 said:
I think you need this one:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
Click to expand...
Click to collapse
Hi Mackaby, thanks for the answer.
That was the first ROM I tried to flash. Gave me error message "wrong vendor, check your update software"
Now I only get bootloader when I start my device. I have(had) a Norwegian ROM so I guess the CID does not match. I wish I unlocked my device before trying the WM6 ROM but......
Now I am stuck : Cannot boot / install my original ROM or install any.
My hope is that I can either unlock my CID in Bootloader or installing the original ROM again with a hard reset. To bad a hard reset only sends me to bootloader.
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Hey Pof,
Welcome to the Athena forum. Are you planning on being here or you were just passing by...
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Hi Pof ! Thanks for the answer and clarification. Will try today !
Greetings, Eric
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Did it. Same result : Bootloader shows up after "task 8"
bootloader says :
athe100
ipl-v1.00
Athe100
SPL-v1.07.0000
red (raster)
green (raster)
blue (raster)
"Serial" when not USB connected, "USB" when connected in white field.
Guess I have to send my device for service since there are no ROM available for my local X7500 That's life
lpsi2000 said:
Are you planning on being here or you were just passing by...
Click to expand...
Click to collapse
Just passing by, sorry... i don't have athena
EricBr said:
Did it. Same result : Bootloader shows up after "task 8"
[...]
Guess I have to send my device for service since there are no ROM available for my local X7500 That's life
Click to expand...
Click to collapse
bummer..
Eric
As far as I know, all the athenas were provided withe the romcode ...if one hqs got the bonus pack.Just check withe someone for the bonus pack,,ai hope this helps.
hdubli said:
Eric
As far as I know, all the athenas were provided withe the romcode ...if one hqs got the bonus pack.Just check withe someone for the bonus pack,,ai hope this helps.
Click to expand...
Click to collapse
Hi Hdubli,
Thanks for the answer.
Bonus pack ? do you mean the CD that followed my x7500 ? I can check but don't think there are any ROM Flash application on that.
Sorry if I didn't understand your message correct
Greetings, Eric
If u buy bonus pack with athena which includes car kit etc etc, u also get CDs, in which the ROM is also there..so I was asking if u can get hold of the dealer from whom u hv got and enquire about it..also in mtty issue info 2 command check what is yr CID
hdubli said:
If u buy bonus pack with athena which includes car kit etc etc, u also get CDs, in which the ROM is also there..so I was asking if u can get hold of the dealer from whom u hv got and enquire about it..also in mtty issue info 2 command check what is yr CID
Click to expand...
Click to collapse
Ok, understand. We don't have anything called Bonuspack here with hardware stuff and ROM software.
This was the output from the mtty command :
Cmd>info 2
HTCSHTC__H10 ÅPýHTCE
Cmd>info 3
HTCSATHE100001.07.0000 ßؽôHTCE
Anything special with this ?
Anyone who knows if it is possible to mod a ROM flash file so that this CID will be accepted during install ?
EricBr said:
Anyone who knows if it is possible to mod a ROM flash file so that this CID will be accepted during install ?
Click to expand...
Click to collapse
That would corrupt the signatures, and it won't flash with an unmodified bootloader.
bootloader screen freeze after turning htc x7500 off
EricBr said:
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
Click to expand...
Click to collapse
Thanks EricBr or anyone who can help me,
I have a similar problem, but in my case I didn't do anything to deserve it... I just turned off my new and provider unlocked x7500 after playing with it all day (just installed skype for mobile and customized some settings, tried the programs, etc.), and when I tried to turn it on again, it just froze in the bootloader screen... Nothing works, I tried soft and hard resets, don't know what else to do?
I've been reading al your posts everywhere and tried a few things without succes, when I conect my x7500 to my pc, it doesn't connect to activesync or anything. I guess I would do better if there would be someone who can create a reply that would clearly guide me on what to do and what files (with links) to download. I simply don't know what happened! since I didn't do anything especial to deserve this from my x7500 which I was falling in love with, after only a few hours of just getting to know it.
I'm new to xda's so please lay it down easy on me... Already had removed the sim and the miniSD I had installed on it... still nothing happens.