Hi there!
I wonder if anyone knows wich registry keys that need to be changed in order to get tactile feedback instead of DTMF tones when entering numbers in phone app?
Remember that i did this on my S100 (Magician), but cant remember wich keys i altered...
Thanks in advance, and happy easter holiday
http://forum.xda-developers.com/showthread.php?t=269024&highlight=
Thanks for fast reply!
Shame that the cab-file isn't compatible with WM6:-(
Does anyone else have the right registry keys that need to be changed, or a registry file that I can import to an registry editor?
HansMarius said:
Thanks for fast reply!
Shame that the cab-file isn't compatible with WM6:-(
Does anyone else have the right registry keys that need to be changed, or a registry file that I can import to an registry editor?
Click to expand...
Click to collapse
i dont know if its the same on the hermes, but did you happen to read that thread, it told you what keys are being edited....
http://forum.xda-developers.com/showpost.php?p=967559&postcount=12
I believe that those are the correct keys that should be altered.
I'll try them in a while!
Thanks for coming up with that link for me!
Seriously thanks for that shogunmark!
It worked
I downloaded the Slide2Unlock app on my 8125 G4 and I'm trying to change the clock settings but in order to do so I have to find this registry
\HKEY_CURRENT_USER\Software\A_C\Slide2Unlock
But I can;t seem to find it. Am I blind? I swear I've looked everywhere for it but no luck. Any advice or help? Thanx! =)
- Eric
what level can you see to?
what i have found so far is that quite often you have to add the last part of the key in this case "Slide2Unlock" and its value.
NVM!!!!!!!!
I just had a friend tell me about a registry editor and i downloaded it and fixed my problem. Thanx to anyone who helped! =)
- Eric
Hi all,
I've been leeching and surfing on this forum for quite a while now and never really took the time to post a thread when i had a question. Normally i'd search the entire place but in this case i just can't find a good solution.
So here is my first question:
A friend of mine got himself the SE- Xperia, I took a good look at it and liked the theme's a lot.
Once I received the files (Root;my documents) and tapped on one of them they didn't show up in the todayscreen wich provides .tsk themes like T-mobile1+2 etc.
Now I know I can do such things as installing a new ROM etc, but perhaps thats a little to much for such an issue.
I'm not expecting a complete walkthrough, but perhaps if someone could help me a little i'd appreciate it.
Many thanks and greets from The Netherlands
Dindnt quite understood, you want just the wallpaper?
---edit---
This one works on mine, but the bars dont get flat black.... Nothing that cant be fixed, of course.
Got it from the full theme with extras, here:
http://www.modaco.com/index.php?automodule=downloads&showfile=2479
Thank you very much,
I'll check that one out tommorrow to see if it works on my phone.
Have a look at ThemeGenCE. It allows you to customise the tsk for your phone:
http://www.pocketpcfreewares.com/en/index.php?soft=1523
And still the .tsk file isn't showing up in the todayscreen (Start>Settings>Personal>Today>Appearance)
I got stuck at the third point:
) Connect your device to your desktop by ActiveSync and explore it.
2) Transfer all the unrar'd files and folders the My Documents folder of your Pocket PC, except the rlToday folder which should be transferred to the Program Files folder.
3) Apply the Xperia skin (Start>Settings>Personal>Today>Appearance).
4) Apply the Wisbar Advance skin (Start>Programs>Wisbar Advance>Theme>Use a Theme File): \My Documents\Wisbar Advance v2.x\Xperia\Xperia.skn
5) Apply the rlToday skin (Start>Settings>Personal>Today>Items>rlToday>Options): Skin: Xperia. Note that the download also contains WM6 style .png icons if you are using PPC2003SE/WM5 and want to use more modern looking shortcuts. If you don't live in Singapore, please edit the skin.xml file to the country of your choice (notepad works).
Anyone?
Thanks
you probably can get more info on the official modaco post, lol...
I am creating this thread, because it should be able to be used with any VGA Manila 2.1 device.
Originally I was posting this it 3 threads. But it belongs in it's own thread so the other threads don't get polluted.
Co0kieMonster monster has a thread that accomplishes this for Manila 2.1. Unfortunately that did not work for VGA Manila 2.1.
For WVGA Devices go here: http://forum.xda-developers.com/showthread.php?t=539107
I took that work and used the tools by stzupy to decompile and make slight changes to allow it to work with VGA. Credit goes to both Co0kieMonster and stzupy.
I only claim credit for making the changes to let this be used with VGA.
But,
I did spend a reasonable amount of time on this, so if you appreciate what I've done and want to buy me a beer by donating, it is appreciated. If not, of course it's free to use. On a side note, I plan to donate to Co0kieMonster and sztupzy based on any donations I recieve for porting this to VGA, since their work made it possible for me to do this work.
To install.
Method 1, the cab.
Disable TFL3D
copy the cab to phone.
Launch the Cab
Install to device.
Enable TFL3D
Method 2, Manual
Disable TFL3D
use the reg file to make the needed registry entries ( either use a program or manually create all of them. The reg file can be opened with notepad.
Copy the 3 Manila files to your phone.
Use total commander on your phone to move these to the windows folder.
Enable TFL3D
Please post in this thread links to ROMs that appear to be using without mentioning that this came from JVH3.
I appreciate donations and being asked. And as I noted portions of donations recieved for this will go to Co0kieMonster and sztupzy. It was sztupzy's tools and Co0kieMonster's work on the WVGA device that I started with.
There is a decent amount of work in learning to decompile and compile manila lua scripts and learning what changes affect what, so it was not a trivial task, but nothing in comparison to the total port of Manila 2.1 to VGA that Yozgatg has done.
As of this edit (February 17th, 2010) I have revieved no donations for it. As donations are recieved, I will post the 5 highest donators in this post, along with the 5 most recent.
Edit
Date=July 25, 2010
Donators - Thank you very much.
Suiller - $15 - May 10 2010 - http://forum.xda-developers.com/showpost.php?p=6439535&postcount=55​Would you buy me beer if I gave you this at a bar.
Here is a donate link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=7380024
Every couple bucks adds up.
Wow! 2418 downloads as of 2/17/2010, and not a single donatation for my efforts!
Remember, you can stiff your server or bartender, but you shouldn't.
Click the donate link if you use and like this.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=7380024
Screen Captures
Not sure what to do about the graphic issue for - landscape - all programs
But that's prety minor.
Reserved for future use
Reserved for future use
Reserved for future use 3
Reserved for future use 3
Reserved for future use 4
Reserved for future use 4
Nice app... thanks for the work.
Great work my friend. I was looking for this. The similar (partial) solutions were not so good...
Thanks a lot..
Good job. A bit laggy in landscape mode at least so it seems but really useful. Thanks for your hard work.
Thanks for this. I am not seeing any problems with all programs in landscape, so it must be something specific to the ROM your running or another mod.
JVH3...
I see you are using my Pimp Package Anyways...is it cool if I add this to my package? I will give credit and links of course
-CMYLXGO
cmylxgo said:
JVH3...
I see you are using my Pimp Package Anyways...is it cool if I add this to my package? I will give credit and links of course
-CMYLXGO
Click to expand...
Click to collapse
Absolutely.
NRG is planning to cook it into the next ROM though.
BTW, your pimp package rocks.
So I disabled TF3D, installed the cab to device, soft reset, re-enabled TF3D and... nothing. No programs tab. What am I doing wrong?
sharkie405 said:
So I disabled TF3D, installed the cab to device, soft reset, re-enabled TF3D and... nothing. No programs tab. What am I doing wrong?
Click to expand...
Click to collapse
Well, I don't have enough info to know what is wrong, but I can ask these questions and give you a few things to check:
Do you have the VGA port of Manila 2.1 installed or included in your ROM?
What device?
What ROM and what date of the ROM?
This does not create the tab, it changes the existing program tab.
If you don't have a program tab, then it might just be disabled.
If you go to the Settings Tab, there is an option, Customize Tabs.
Make sure that Programs is checked.
Hope that helps
JVH3 said:
Well, I don't have enough info to know what is wrong, but I can ask these questions and give you a few things to check:
Do you have the VGA port of Manila 2.1 installed or included in your ROM?
What device?
What ROM and what date of the ROM?
This does not create the tab, it changes the existing program tab.
If you don't have a program tab, then it might just be disabled.
If you go to the Settings Tab, there is an option, Customize Tabs.
Make sure that Programs is checked.
Hope that helps
Click to expand...
Click to collapse
Sorry what a noob thing to do. I'm running the vga port of 2.1 on Juicy's 8 ROM, build 090830 (released 08/30/09), on a Sprint Touch Pro. There is no programs tab to check under the customize tabs settings. I misunderstood what the cab was, sorry. Any thoughts on where I could go to get info. on creating a programs tab?
I dared to install the cab on a Diamond with custom win6.5/Manila 2.0 ROM.
i got the fourth column......with the first and fourth colums halved by the screen side edges! (no icon resizing to get the 4 columns within screen real estate)
Yes, i know the program says Manila 2.1 not 2.0, but...
why it doesnt work in 2.0?
may we expect a Manila2.0 release soon?
Best regards
sirgawain123 said:
I dared to install the cab on a Diamond with custom win6.5/Manila 2.0 ROM.
i got the fourth column......with the first and fourth colums halved by the screen side edges! (no icon resizing to get the 4 columns within screen real estate)
Yes, i know the program says Manila 2.1 not 2.0, but...
why it doesnt work in 2.0?
may we expect a Manila2.0 release soon?
Best regards
Click to expand...
Click to collapse
There is already a cab for 2.0. Do a search and you will find it.
sharkie405 said:
Sorry what a noob thing to do. I'm running the vga port of 2.1 on Juicy's 8 ROM, build 090830 (released 08/30/09), on a Sprint Touch Pro. There is no programs tab to check under the customize tabs settings. I misunderstood what the cab was, sorry. Any thoughts on where I could go to get info. on creating a programs tab?
Click to expand...
Click to collapse
Wow, no programs tab.
There is probably some manila file that just needs to be replaced, because the tab is a part of the Manila 2.1 port.
In Manila 2.0, I used to manually modify a file to control the order of my tabs. Might be the same one in 2.1
Found the thread for the ROM:
http://ppcgeeks.com/forums/showthread.php?t=58002
I couldn't see any screen shots. I'm not a member there and couldn't see a search this thread. I would search that thread to see where the programs tab is or how to get it back. The people in that thread would most likely know what to do to get it back, since it seems they removed it.
Still can't believe they didn't include it.
[EDIT]
Realized I am a member there. JohnVH3
Haven't posted ther though. Found this in that thread:
Re: [ ROM ] [ KITCHEN ] JUICY 8 - Build 090830H (23037.5.3.0) [UC]
--------------------------------------------------------------------------------
Quote:
Originally Posted by mike2037
Is it possible to get the program launcher tab back?
Has anyone tested any cabs with the current ROM?
I have it. Don't really know how. It wasn't there until I ran my Sashimi config. Then Bam. I'll look into it.
Click to expand...
Click to collapse
Just as an update. I got the reg. settings and got the programs tab and your tweak works very well. Thanks again for the help
The label display is wierd!!!!
See the snapshot below----
c_shekhar said:
The label display is wierd!!!!
See the snapshot below----
Click to expand...
Click to collapse
It looks lik your missing some language pack or something else.
It normally shows
ADD
I don't know which file needs to be edited.
I assume you did not have a programs tab before.
I have uploaded to this post, all the Manila files that are in the 8/6 Energy ROM that define these constants. Probably if you copy them to your windows folder, it will look normal for you.
Hi I try to add text in title area in sens UI(take a look at screenshot), and change it periodically. I have tried look for some solutions but without luck. Could someone point me where should I start? I have good understanding about c++, c# but I don't have any knowledge about sense, manila etc.
d3dek have you tried CHT Editor http://forum.xda-developers.com/showthread.php?t=633590 and CHT Home Tab http://forum.xda-developers.com/showthread.php?t=625483 having those two applications install will allow you to add text and change it periodically. I hope this helps.
I've just install it, and I must say it's pretty awesome ;P. But it doesn't solve my problem. I need to change this from programmatically, from c# or c++ code ;P. I didn't write that before, sorry for that. I don't know if it is good board for this question, maybe I should post it in general Windows Mobile board.
Go to Menu, CHT Editor, Miscellaneous Settings, Custom Operator. Change the operator name to what ever text you would like it to display there. I hope this helps.
Yes I know I can do it like this. But I need to change that from code, or by some script.