HD2 bricked - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!

SSPL? Aren't you supposed to use the HSPL?

jamesmbaldwin said:
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
Click to expand...
Click to collapse
As far as I know the "void" thing below the battery is correctly in place. If it was missing - then your warranty would be void.
I would put your phone into bootloader and flash a stock rom.
If you have a european phone check this http://forum.xda-developers.com/showthread.php?t=609477
If you have USA phone check here http://forum.xda-developers.com/showthread.php?t=653614

Your phone is not bricked, you should be able to reflash back to a stock rom. To flash a custom rom you should use Hard-SPL, if you do this make sure you pay close attention to the directions, because a long time ago I bricked my wizard because I didn't pay attention to details

http://forum.xda-developers.com/showthread.php?t=606713

And if you have T-Mobile USA 1024 version:
http://forum.xda-developers.com/showthread.php?p=6004691

Fixed my Aussie T9193
Hi, thanks all for the responses, I've gotten it working! I didn't know about getting the phone into bootloader mode FIRST, then doing the installations. BIG help, thanks to the collective wisdom!!
JMB

i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed

lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
post in the ozrom thread then

lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
did you check your radio and did you use hspl ?

djchubbs said:
post in the ozrom thread then
Click to expand...
Click to collapse
Wrong radio!

I bricked my phone after using "Task 29"... PLEASE HELP!
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!

starr073199 said:
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
Click to expand...
Click to collapse
Just hold the volume down button and then press the end call button instead of both the volume buttons...

garavd said:
just hold the volume down button and then press the end call button instead of both the volume buttons...
Click to expand...
Click to collapse
omg!!! I love you!!!!! Thanks sooooo much!!!!

possibly bricked hd2? any help!!??
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull

articulatekevin said:
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
Click to expand...
Click to collapse
try turning on holding volume down push power and then plug to pc wait for usb to appear on phone screen and do task29 and than reflash your favorite rom again..... good luck!!!!!!!

Related

Bricked Hero

After ROM upload my HTC Hero show only some logo like device out of box. Nothing else is going. Button combinations for bootloader access is not working. Any ideas?
I managed to skilfully brick mine too, is a there a way to get it to boot up via key combination or using USB from a computer?
We are three now.
I know (presumably) my error: I flashed an SPL zip package that could be of the wrong type (Dream).
The boot shows the phone logo (mine says G2 T-Mobile).
The home keydown at boot doesn't work.
Is there a possibility to unbrick it?
Hope someone tells you how to unbrick it as I was about to do the update the ROM, not sure I want to do it now.
Right this is very weird as i had the same picture on my phone and thought it was bricked too..
BUT i just did a soft reset call menu end together. Then i did a hard reset as i wasnt sure if the soft one had done anything. Battery out then in and start up phone whilst holding down house and back key and then it started to boot up. So not sure if this helps anyone i doubt it as its very random but i thought id share just in case!!!
I had just flashed my radio when mine did this..
friend of mine had tha problem too, he had to send his device to htc.. 50 bucks ;-)
hmmm ... i am one of u guys now ...
no matter what key-combo i press, it just show a BOX and an arrow and a phone ... 3 sec later, phone turns off, no matter hwat key u press, it is not doing anything until u unplug the batery ... then when u turn it on, it repeat the same thing again
check if you can access fastboot via back+power when the phone is off. if so install recovery image and then install correct rom. if not i guess you're screwed, not sure though.
This guy
http://forum.xda-developers.com/showthread.php?t=556038
seemed to have the same issue and resolved it.
Hope it helps/good luck!
sonatbey said:
i bricked very bad no screen no logo not booting. anyway any helps
Click to expand...
Click to collapse
Please be more explicit as to what exactly you did.
(for someone to help you)

HD2 is brick not boot up Please help

First of all sorry for my english not good.
Start : with my HD2 have brick after task29 and not success to flash new ROM I'm take USB. cable out and try to open my HD2 in to boot loader by put volum down + power bottom but screen not show any image or 3 color my phone it only long vibration pull battery out waiting 30 minute and put battery in and try to open my phone to boot loader but is same only long vibration.
Now : can not do any think with it when try to plug power in my phone is auto startup and long vibration.
I'm search on google and in this forum not have some one face problem same as me please help me to fix this.
Any body please help me, I'm love it because now we can run both WM. and Android
Upppp waiting for your help
Did you try a long press of the reset-button?
You could try to put the original Stock Image from HTC onto the root-folder of your SD-Card, rename it to LEOIMG.nbh and Push Vol up + Vol down during start and follow the on-screen instructions if it works.
Otherwise use Search-Function in the forum.
ı have jtag HTC for samsung and HTC devices if u want send for repair to me..
www.sevgigsm.net/forum
admin..
I use ORT
Did you check to make sure your radio version was correct before flashing? This is probably the number one reason for bricking.
Check this thread it may help you if you did the flash properly:
http://forum.xda-developers.com/showthread.php?t=668347
i got same problem now...
no screen, no boot, vol down+ power oso same
no screen just a long vibration
anybody help?
I am using the correct radio so don't tell me I am using a wrong radio or something, I have been flashing for 4 months so I know EXACTLY how to flash.
now i can neither get into tri-color or hard reset so don't tell me to flash or smth like that, just tell me how to recover properly
Don't tell us to use search or something because seems like only 2 of us is encountering this problem in the internet
I'm exactly the same problem as TS coz it juz auto go vibrate when plug in battery
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
at the long vibrate, when i plug in to my pc, it will keep on got usb connected and disconnected sound
and dont know what device is connected as not shown in found new hardware and device manager
I also have been searching all possible keywords about what me and TS encountered but all linked to completely UNRELATED results(like search for long vibrations only link to people asking how to make vibration long and 1st result is this thread)
bountygiver said:
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
Click to expand...
Click to collapse
Silly question, but are you holding (and keep on holding) the Volume-Down button while you press the power button?
of course YES
i told you i have been flashing for so long
Leo from T-Mobile. Hi! I've got same problem. After flashing new (next) rom phone definetely died. Phohe is currently simfree and with HSPL. Only one reaction is short vibration after press power button. I searched everywhere. My phone has no bootloader but system see him as Qualcom CDMA Technologies MSM. Thats all, any ideas? Please and thanks for advice.
czaruch said:
Thats all, any ideas?
Click to expand...
Click to collapse
Yes, you flashed a non tmous stock rom that included a ..51.. radio and it destroyed your phone.
What rom? exact filename please.
thank you so much.
I bricked a Leo with the .51 radio. I think I read that is a European or otherwise foreign radio. Since your ROM has Euro in the name.......
czaruch said:
ROM_Leo_HTC_WWE_EastEurope_1-66.
Click to expand...
Click to collapse
The full filename for that rom is
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Si gned_15.32.50.07U_2.07.51.22_2_Ship.exe
it comes with a version x.xx.51.x radio, and they do Not work on tmous (t mobile us) phones. They kill them
Your phone is dead, sorry. No known fix.
warranty or repair (or JTAG if you are brave and have the money)
a friend of mine bricked his phone. he then tried to microwave it, but that didn't work after that he took a power wire from an old computer, cut it and connected it directly to the phone's parts where the battery would go...this completely f-ed his phone up (he also used a lighter to fake a powersurge of the battery). Then he called htc and a few weeks later he got a new hd2!
GOOD LUCK
lol, he doesnt need to do any of that, its allready as dead as it can be. Loads of epople have had them replaced under warranty with this kind of brick. It wont start, so htc/tmo cant see that its been hacked.
Hi! I understand and realy sad. Somebody know where could I fix it in UK? And how much for this pleasure. Thanks.
i would contact htc, see what they have to say. (dont say you flashed it, it just stopped working")

[Q] HD2 wont boot pass White Screen with green HTC words

i cant boot my hd2 pass the white screen with the green HTC letters, i tried hard reset but that doesnt work.
thx for your help
more info, last thing you did, what you were trying to do.
i just did that vol up + down and end call thing. im a complete noob when it comes to phones.
i didnt do anything to my hd2 (no custom rom)
it was working fine until when i tried to turn it on
i dunno if this is relevant but when i charge it the orange light is always on (at the top) even if im not charging
iethanx3 said:
i dunno if this is relevant but when i charge it the orange light is always on (at the top) even if im not charging
Click to expand...
Click to collapse
everything is relevant, and yes, that would point to a battery / charge circuit fault.
Bent battery connectors? (look carefully at all 6)
they look fine ill try to upload a video thx
heres a video hope it helps
youtubelink/watch?v=jK-T_NqNChc
im not allowed to post urls
You do need to hard reset, and (no disrespect) I suspect you're doing it wrong. Turn off the phone completely, then hold down both volume buttons and just press the power button briefly (don't hold the power button, but continue holding both volume buttons).
You'll then be given on-screen instructions that I can't remember as it's been so long since I've done it.
thx for your reply but it still doesnt work it says restore complete... vol up to reboot or something. After i reboot it. im still stuck on white screen and green HTC words
If it doesn't even boot after a hard reset then I think it needs replacing mate. It sounds irreparably damaged.
Is it new? Have you had it for a while and this just started happening? If so, what was the last thing you installed or flashed?
iethanx3 said:
heres a video hope it helps
youtubelink/watch?v=jK-T_NqNChc
im not allowed to post urls
Click to expand...
Click to collapse
did you flash a custom rom? and if yes, did you flash a matching radio? cos if you dont flash the right radio, and the cooked rom is based on a tmous core, (unlocks the 576 ram) the phone wont boot.
enter bootloader, flash a radio with 50 in the version, and it will boot.
i only had it for 6 months
how do u install then radio thingy ill give it a shot plz link me
i think it is a custom rom because my HD2 is taiwanese and i got some person to change it to english for me (custom rom?)
When i go on boot loader it comes up with
PB81100 HX-BC
SPL-1.4.2. HSPL XE
0x05
cotullaHSPL 0x40
i dunno if i got a custom rom installed.. i think it is because i bought it overseas (taiwan) and i got someone to install a english rom on it
and how do u install a radio rom because my i cant seem to get windows mobile device center to work. i found
Leo_RADIO_15.28.50.07U_2.05.50.11 **(from TMOUS 2.01) on xda forums will it do?
thanx
flash from bootloader, no need for windows mobile to be running.
that radio is a test radio, and isn't a high enough version for what you need(if the radio is indeed the problem)
look in the radio thread and go for somethin like 2.10.50.x
thx for your reply... but unfortunately i dunno how to do that bootloader thingy i think im just gonna send it back to taiwan and get someone to fix it for me. because i tried in sydney it cost 200 dollars just for them to check wats wrong
iethanx3 said:
thx for your reply... but unfortunately i dunno how to do that bootloader thingy
Click to expand...
Click to collapse
yea its pretty difficult,
phone off
press hold and keep holding voldown
tap and release power
when bootloader appears, connect usb
wait 20 seconds
run your flash on the pc
i can see how you would struggle with such a difficult process
haha problem is it doesnt recongise my device
hey you have to change you spl from 1.42 to 2.08 using hspl4 or hspl2.then only you can flash custom rom or roll back to stock rom .hope this would help.

I LOST MY MIND! if u can tell me what to do b4 i send myhd2 back for replacement

I have a hd2 with blutopia n supersports rom and today has been 1 helluva messed up day seriously !( I cant think straight) its all because my phone wont work. the phone was working beautifully with android on it and out of nowhere today the screen is not responding AT ALL. its so frustrating cant make a call cant read my txts.can some 1 please just tell me what i have to do so i can get a replacement? I put hspl3 and bluetopia android and supersports rom....please tell me what rom do i need to flash to it,do i have to relock/remove hspl3? thanks if u can help me out i just cant think clearly right now
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
carl1961 said:
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
Click to expand...
Click to collapse
what about hspl3???? what do i have to do so i can send it back without tmobile asking me why is there a custom rom and hspl3 on ur phone
ihateu said:
what about hspl3????
Click to expand...
Click to collapse
will be replaced when you flash original rom
djcedric said:
will be replaced when you flash original rom
Click to expand...
Click to collapse
ok how can i get the original rom... i cant get it from tmobile website because it wants a mei # and i cant get to it on my phone cause the screen is not working
open your phone up. take the battery off. The IMEI should be there along with serial number. Good luck
Touchscreen problem
Yesterday I start with a similar problem.
Using several Android builds on the same stock memory card.
The touchscreen stops responding always when I try to
reboot or turn off the phone, the same on all Android builds
and on WinMO. But locking the phone brings the touchscreen
back to life. Then I am able to unlock the phone and the
touchscreen keeps working OK.
Will try flashing the updated stock ROM.
you run hspl3 again , but select the other option with the extra.oooo, 208.000 , by default hspl3 installs the one to allow roms to work,,, when you rerun hspl3 select the other to set back to original so you can send back to factory anfter u install the t-mobile original rom
best to read this
http://forum.xda-developers.com/showthread.php?t=653614

[Q] Stuck in bootloader

OK title says it all, and yes I have been reading for the last 3hrs, all the possible solutions.
HD2 EU Vodafone UK
So here is what I have tried:-
Task 29 + flash stock rom - stuck -
Hard reset - stuck
remove HSPL - stuck
flash latest Vodafone rom from HTC 3.14.161.3 - stuck - also SPL now 3.03
flash old stock to downgrade SPL to 1.66 - stuck
Have also tried reinstalling MAGLDR - stuck - magldr doesn't even show.
I never get flash failed, and yet it will not get past the Tri coloured bootloader.
Also I cannot get it to flash from SD. I have tried holding the endcall and vol down but it just goes to the loader.
Vol Up and endcall goes to hard reset.
And, to make it worse, it's not even mine. I was returning it to Winmo for a mate.
Phones been running Android nand since March without problems.
All suggestions welcome.
Bixx said:
Vol Up and endcall goes to hard reset.
Click to expand...
Click to collapse
that would indicate a stuck volume down button, since hard reset is volup and voldown. (You dont need to hold power, tap and release it, its teh vol buttons you hold)
You are quite right about the vol up and down for reset.
Also, I had been considering the possibility of a stuck button.
I will see if i can prove or disprove it.
Thanks for the response.
Does anybody know how many buttons are in the volume control rocker?
Is it:-
1 for down volume
1 for up volume
and another for both when you hold both in?
I am still trying to decide if the down volume button is stuck on.
When I hold both down I can get into reset mode, but if I only press the up it still goes to tri colour.
So I am still not sure if the down is stuck on.
3 buttons in the rocker could explain why up only doesn't go to reset but 2 buttons only would confirm that the down is not stuck on.
All comments welcome
two, you can feel them click on individually when you press them.
I too can only feel 2 and that would imply that the down is not stuck.
When I hold the up button and switch on it goes to boot loader, if it was stuck shouldn't the phone have gone to reset?
I was hoping it was like a mouse wheel with forwards, backwards and click down which is 3 positions.
I'm running out of things to try.
If it's not stuck why does it keep going to bootloader with out being asked?
Why can I flash roms and HSPL without any failure messages but still find no change on reboot?
Thanks for the replies and please keep them comming
I have managed to flash from SD. I tried a different card.
I have attached a pic of the screen saying update complete, update success.
But still stuck in bootloader
well, if it isnt hardware, it must be a corrupted bootloader issue, or bad nand blocks perhaps. ive seen quite a few 'only enters bootoader' threads over the yrs, but never really noticed a solution.
sorry, no suggestions, other than perhaps give teh freezer trick a go?
I'm desperate enough to try almost anything.
I will have to read up on the freezer trick.( don't want to kill it completely)
I have also contacted a couple of repairers for a quote using Jtag. the first said "sorry bricked" and I'm still waiting for the second reply.
Also reading up on Goldcards, maybe that's another option?
Thanks again for the reply.
Bixx said:
I'm desperate enough to try almost anything.
I will have to read up on the freezer trick.( don't want to kill it completely)
Click to expand...
Click to collapse
cant hurt to try.
I have also contacted a couple of repairers for a quote using Jtag. the first said "sorry bricked" and I'm still waiting for the second reply.
Click to expand...
Click to collapse
lol, probably scared of doing it (it requires dismantling teh phone, and theyre notoriously easy to break, there are loads of threads here where someone took theirs in for a fix and the vol/bottom button/screen ribon cables got broke by the shop.
Also reading up on Goldcards, maybe that's another option?
Click to expand...
Click to collapse
could be tho unlikely (sorry) goldcard flashing is just sd flashing but bypasses carrier and region checks.
if you can get the serial of your sd card, i can make you a goldcard image, no problem. (Don't bother using the free goldcard page on revskills website, its for android and wp7 phones) . PM me the serial and an email address if you want one.
@samsamuel Thanks for all your help and advice.
I have sent it off for repair today.
As I said in the first post, it's not even mine I was re flashing winmo 6.5 so my mate could sell it.
Hopefully it will be all sorted now.
Update.
I contacted 3 repairers.
1st said "sorry dead"
2nd said "£40 + postage"
3rd said "£21 which became £29 all in"
So I sent it to 3rd one, got a quick reply "sorry unable to fix, here is a full refund" and they returned it via 1st class post.
So yesterday I've got the phone in my hands, poped in the battery and I am presented on screen with a triangle and the words "flash failed please try again"
So task 29, now back with a tricoloured screen. See attached.
Now tried a custom Winmo, and it works
So I tried 2 Vodafone and 1 O2 stock roms and they all failed at 9%.
Tried another custom Winmo, and again working
So finally, I have task 29, CLK, clockwork v5 and latest MIUI. All working just fine.
Is there a stock looking custom winmo that anybody can recommend?
Hah, a lucky outcome. The radio is stuck, hence stock roms failing, but lucky for you its still a working radio, so customs are working. About the best result you could get, considering.
I'd say try the Artemis rom, but that will require spl 3.03.hspl, and occasionally the stuck radio issue messes with changing spl,,
Not so sure about your stuck radio theory, I have been able to change the radio without an issue.
I will give Artemis rom a go.
thanks for all the support.
Merry Christmas
Bixx

Categories

Resources