Dear forum members,
A new ROM for the TELUS operator RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar added, in detail:
A. Updates Summary
31.03.2011
1. TELUS Operator New Branded ROM RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar added
2. [3] branded ROMs in total
19.03.2011
1. Classification for Operator name and CID is added, see section: [B. Notes Summary]
06.02.2011:
1. The thread is uploaded
2. TELUS Operator New Branded ROM RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar added
3. Cingular_US Operator Branded ROM RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar added
B. Notes Summary
Note 1:
In order to identify your Surround phone ROM version see in your phone settings>about>more information:
Firmware revision number: 2250.09.10307.502
Your phone ROM version will be: 1.03.502.07
The characterisric value (CV) is: 502
Your Operator name and CIDs i.e.: Cingular_US operator, with CID CWS__001 can be found with this CV from following classification:
1. 502: Cingular_US operator, with CID CWS__001
2. 661: TELUS operator, with CID TELUS001
In case your phone operator name and the above ROM version of your phone is included in section:
D. Windows Phone 7 Branded ROMs
where ROMs are listed in a template form, in order to minimize post space, and:
[BR] is for Branded Rom, to check if it applies to your phone operator
then:
1. You can safely flash your phone with a new version of a Branded ROM and then return to the initial Branded ROM
2. In case only your phone operator name is included then you can flash a Branded ROM but no return is feasible to the initial Branded ROM
If so you can also go at link of Note 2 to flash any available Radio Unbranded ROM of your phone operator
Then you can go at link of Note 3 to flash any available Unbranded ROM of your phone operator
Note 2:
For Radio Unbranded ROMs to flash your phone see this link: Windows Phone 7 Radio Unbranded ROMs for Surround
Note 3:
For Unbranded ROMs to flash your phone see this link: Windows Phone 7 Unbranded ROMs for Surround (Pending ...)
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
D. Windows Phone 7 Branded ROMs
All Branded ROMs are uploaded including the phone picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Cingular_US operator, with CID CWS__001:
1.1 BR: RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar
2. TELUS operator, with CID TELUS001:
2.1 BR: RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
2.2 BR: RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar
Till next version, enjoy!!!
Regards, ansar.
Post #2 reserved for future use.
Post #3 reserved for future use.
Post #4 reserved for future use.
Works perfectly
Thanks ansar, I'm not entirely sure of all the updates contained in this firmware, but it did sort out a few bugs
I picked up a surround from Telus on the first day of release, unlocked it and am now using it on Rogers.. One of the most notable features that's missing from these first gen surrounds is the lack of the "FIND" speech command... It's in the documentation, but it's not enabled in the original stock rom.
The TELUS rom you provided here enabled that, among a few other minor fixes.
Now the big question is; When NoDo is released, will it include firmware and radio updates?? Or will it be OS updates only?
ansar this software is not working in my hc surround, i got with the demo mode and flashed this rom but nothing changes, after a few minutes it goes back to demo mode.
i had a hd7 and it was on demo mode i flashed one of your roms and is fine now, why is not working in my surround?
Aoshi_ said:
Thanks ansar, I'm not entirely sure of all the updates contained in this firmware, but it did sort out a few bugs
I picked up a surround from Telus on the first day of release, unlocked it and am now using it on Rogers.. One of the most notable features that's missing from these first gen surrounds is the lack of the "FIND" speech command... It's in the documentation, but it's not enabled in the original stock rom.
The TELUS rom you provided here enabled that, among a few other minor fixes.
Now the big question is; When NoDo is released, will it include firmware and radio updates?? Or will it be OS updates only?
Click to expand...
Click to collapse
Hi,
We wil wait for the final NoDo version that probably will be a major one.
Thanks for supporting!!
Regards, ansar.
elmanortega said:
ansar this software is not working in my hc surround, i got with the demo mode and flashed this rom but nothing changes, after a few minutes it goes back to demo mode.
i had a hd7 and it was on demo mode i flashed one of your roms and is fine now, why is not working in my surround?
Click to expand...
Click to collapse
Hi,
Demo mode may also introduce CID problems and not only.
Which one did you flash, Cingular or TELUS?
Regards, ansar.
ansar.ath.gr said:
Hi,
Demo mode may also introduce CID problems and not only.
Which one did you flash, Cingular or TELUS?
Regards, ansar.
Click to expand...
Click to collapse
I flashed both cingular with the same result, it takes 5 seconds to get to 98% and 5 seconds from 98% to 100%. and the the unit reboots like new after a few swconds in the home screen all demo mode comes back.
elmanortega said:
I flashed both cingular with the same result, it takes 5 seconds to get to 98% and 5 seconds from 98% to 100%. and the the unit reboots like new after a few swconds in the home screen all demo mode comes back.
Click to expand...
Click to collapse
Hi,
If flashing is as you describe, this is the case that there is no actual flash taking place.
It is like a hard reset and that's why demo mode recovers.
You must disable demo mode with a registry change or otherway, and enter run mode.
Can you side load *.provxml or xap files, after chevron unlock?
Regards, ansar.
ansar.ath.gr said:
Hi,
If flashing is as you describe, this is the case that there is no actual flash taking place.
It is like a hard reset and that's why demo mode recovers.
You must disable demo mode with a registry change or otherway, and enter run mode.
Can you side load *.provxml or xap files, after chevron unlock?
Regards, ansar.
Click to expand...
Click to collapse
how do i do that???
elmanortega said:
how do i do that???
Click to expand...
Click to collapse
Hi,
Can you chevron unlock it?
Can you side load *.provxml or xap files, after chevron unlock?
See hacking and development thread for details.
Regards, ansar.
elmanortega said:
how do i do that???
Click to expand...
Click to collapse
You dont need to. I successfully flashed a demo-mode surround successfully.
Just do a hard reset
1. hold vol-up/vol-down, power on while holding
2. release, follow hard reset instructions
3. pull the battery before it reboots
4. boot it in boot-loader mode and flash successfully!
also, question for ansar... if i flash an unbranded rom to my htc surround, will it still be sim-locked?
sidicious said:
You dont need to. I successfully flashed a demo-mode surround successfully.
Just do a hard reset
1. hold vol-up/vol-down, power on while holding
2. release, follow hard reset instructions
3. pull the battery before it reboots
4. boot it in boot-loader mode and flash successfully!
also, question for ansar... if i flash an unbranded rom to my htc surround, will it still be sim-locked?
Click to expand...
Click to collapse
you are a geniuos
done
flashing will not lock your cell
another hack done by xda developers
ansar.ath.gr said:
Dear forum members,
The thread is uploaded and Operator Branded ROMs added, in detail:
A. Updates Summary
06.02.2011:
1. The thread is uploaded
2. TELUS Operator New Branded ROM RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar added
3. Cingular_US Operator Branded ROM RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar added
4. [2] Branded ROMs in total
B. Notes Summary
Note 1:
In order to identify your phone ROM version see in the settings>about>more information:
Firmware revision number: 2250.09.16101.207
Your phone ROM version will be: 1.61.207.01
You will also need to know your operator name i.e.: Cingular_US, TELUS etc
This name is derived from the store/source you received your phone
In case your phone operator name and the above ROM version of your phone is included in section:
D. Windows Phone 7 Branded ROMs
where ROMs are listed in a template form, in order to minimize post space, and:
[BR] is for Branded Rom, to check if it applies to your phone operator
then:
1. You can safely flash your phone with a new version of a Branded ROM and then return to the initial Branded ROM
2. In case only your phone operator name is included then you can flash a Branded ROM but no return is feasible to the initial Branded ROM
If so you can also go at link of Note 2 to flash any available Radio Unbranded ROM of your phone operator
Then you can go at link of Note 3 to flash any available Unbranded ROM of your phone operator
Note 2:
For Radio Unbranded ROMs to flash your phone see this link: Windows Phone 7 Radio Unbranded ROMs for Surround
Note 3:
For Unbranded ROMs to flash your phone see this link: Windows Phone 7 Unbranded ROMs for Surround (Pending ...)
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
D. Windows Phone 7 Branded ROMs
All Branded ROMs are uploaded including the phone picture:
1. Cingular_US operator, with CID CWS__001:
1.1 BR: RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar
2. TELUS operator, with CID TELUS001:
2.1 BR: RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar
Till next version, enjoy!!!
Regards, ansar.
Click to expand...
Click to collapse
Thank you very much for the support ... can you tell me what language they bring? now that I have the original AT & T and is only in English. I need Spanish ... gives a rom that you posted on the forum is set to that language later?
Another important thing, to change flash 3G bands? that I do not want to fail then the 3G (I use the 850 band, who have phones from AT & T)
Thank you very much again for your input.
Greetings
Hi,
Thread is updated with Classification for Operator name and CID.
Regards, ansar.
languaje
Thanks for your work.
This ROM for Cingular is multilingual? I will need spanish.
waiting for new surround NoDo update. any news on that?
waiting for unlocking procedure for surround i need this in spanish
kalon3344 said:
Thanks for your work.
This ROM for Cingular is multilingual? I will need spanish.
Click to expand...
Click to collapse
Hi,
No, only 0409 English keyboard
The other ROM, TELUS supports Spanish too.
Regards, ansar
Related
This post is supposed to help everyone who is new to Touch2, or at least new to Touch2 custom ROMs, and ROM flashing in general. If you have answers very to very general questions that might be missing here, please let me know in a reply. (Maybe this will eventually end up in the Wiki as well, there is no Touch2 section as of now)
1. What devices is this part of the XDA-Developers forum about?
This Area is all about the HTC Touch2. HTC's code name for it is MEGA. It also has a model number, which is T3333. Here is the specification at the HTC website. It looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Beware: There are other devices with similar names, like for example Touch PRO2 or Touch Dual. These are different devices, and have their own forums. Please do NOT use anything from the Touch2 for those other devices, it may "brick" (destroy) your device.
2. How do I identify my Touch2
First of all: If it doesn't look exactly like the picture above, it is not a Touch2. To be sure, shut down your device, open the rear cover, remove the battery. There it should say HTC Touch2 T3333.
You can also check on your device in System - Device Information - Identity. The Model No. should be HTC Touch2 T3333.
3. Touch2 Special Edition / T3320 / India Model
There is a Special Edition of the Touch2 with the Model Number T3320. It seems to be sold mainly in India, and does not have GPS or 3G (just GSM). It seems the Touch2 ROMs work OK (after HardSPL, see below) on both models, with GPS and 3G obviously not working on the T3320.
4. Why would I care about changing my ROM?
There are many reasons, but here are some of the most relevant:
- If you want a different language (some ROMs have selectable languages, but many don't, and officially you can not change the language of your device)
- If you want to have the newest Windows Mobile 6.5.5 instead of the standard 6.5
- If you want a "light" ROM, with many applications etc. removed, but more space
- If you enjoy tweaking your device, playing with it, etc.
Note: If you are fine with English as the language, but need a special keyboard and support for special characters for example in SMS, then there might not be a need for flashing another ROM. For example Arabic and Russian input is available here for install. No new ROM and no HardSPL necessary, changes can be undone by hard resetting. Other languages might be available as well, please search this forum.
5. What's the risk in changing my ROM?
First of all you have a little risk of bricking (destroying) your device when you do the HardSPL (see below what that is). When flashing ROMs there should be very little risk involved. You can also always go back to the original ROMs. If your ROM language/version (T-Mobile etc.) is not available for download (see this thread), then you might want to dump it first for backup (see this thread).
Apart from that are warranty issues. The place where you bought your Touch2 might or might not be willing to do warranty repairs if you messed with your phone's ROM. Of course, you can always flash back the original ROM (or your backup), and also flash back the original SPL. In this case it would be hard to get no warranty, if you didn't destroy anything else by yourself.
6. Before you can flash a new ROM: HSPL / HardSPL
Normally you can only flash original ("Stock") ROMs that are meant for your device. If you have a standard Touch2, then these are the ROMs directly from HTC. These phones, which have no brand name by some telecom company (like T-Mobile, Orange, ...), are called "unbranded" phones. If you have a branded phone, then you can only flash the ROMs provided by your telecom company. If you try to flash anything else, it will either show an error message, or you even might risk bricking (destroying) your device. Think of the SPL as the piece of software that starts first when you turn on the Touch2. There is a security lock in there, which prevents custom ROMs or other language ROMs to be flashed. There is, however, a modified SPL made by the XDA-developers user jockyw2001. It is called HardSPL or HSPL, and allows you to flash basically whatever you want. (Note: There might be some restrictions still, I am not sure - someone might want to give more info in case certain ROMs like Russian need more than just HSPL)
To change your SPL to HardSPL, please go to the first post of this thread and follow the directions there very carefully. There are lots of small hints what you can do to make it work, even if it doesn't work at first.
7. Checking your SPL version: SPL Tri-Color boot screen
Turn on (or reset) while you keep the "volume down" key pressed. You will see a screen like this:
If you have changed your SPL to HardSPL successfully, this screen will say SPL-1.28.Hard
8. Where to get ROMs
To get stock (HTC standard) ROMs in other languages, visit the Mega - ROM - Hotfix - User Manual - roll-up thread
Or check http://shipped-roms.com/shipped/Mega/ or http://htcpedia.com/soft/mega-touch2-rom.html
For user-built custom ROMs, check out the many threads in this part of XDA Developers
Finally, you might want to create ("cook") your own ROMs. You will have to learn a lot... osKitchen supports MEGA, and Chef Central has lots of resources. Good luck!
Here some newbie info on starting to build ROMs from fktsndr:
fktsndr said:
-[WM Kitchen] osKitchen NEW UI v1.25 - Easy Visual Kitchen
-[OS][WM6.5.5] Latest Releases (23563), Porting, Tutorials, Tools, VM, etc.
-[REF] Updated 27-Apr: Latest 6.5 and 6.5.x builds and Manila builds for Rom selection
Useful softwares:
- OSKitchen MEGA (with working htcrt_devices.ini and ferom file)
- WinCE Cab Manager (not free)
- OEMizer
- MSCEinf
- HardSPL kit for Mega Touch2 by jockyw2001
- QuickCAB
Click to expand...
Click to collapse
9. How to flash a ROM
Please go to the first post of this thread, there is a custom ROM flash utility attached at the bottom of the first post. You can also download it with this direct link. If that one doesn't work for you, DrJason pointed out that the utility in this post works OK as well, also under Vista.
You basically need to do these steps:
(Connect the phone to your Windows PC with the USB cable, you need to have Active Sync set up and connected to your phone)
1. Apply HardSPL (Number 6 above) and check that it was successful (Number 7 above)
2. Restart the phone and boot normally
3. Copy the ROM file (nbh file) into the same directory as the ROM update utility
4. Run romupdateutility.exe and follow the instructions on the screen
5. After flashing is complete, do a hard reset (Number 10 below)
Note: Alternatively some people had success flashing from an SD card, where you don't need an PC connection. The card must be FAT32 formatted and less than 4GB total capacity. Rename the ROM (".nbh" file) to "PB74IMG.nbh", copy to your card, switch off phone, hold volume down and press power button, then continue according to the instructions on the display.
10. How to fix many issues: Hard Reset / Recovery
To reset your Touch2 completely you can do a hard reset. This sets everything back to the currently flashed ROM's defaults, so you should do it after every new ROM you flash. Caution! That means all of your settings, programs, SMS, phonebook (unless on your SIM), messages, modifications, etc., will get lost! So do a backup first. (See number 11 below)
Turn on (or reset) while you keep the both volume buttons pressed. A screen will appear asking you to press "volume up" to do the hard reset, or any other key to cancel it.
11. How to backup some stuff
For Appointments, Call Logs, Contacts, SMS & Messages (no MMS!), Speed Dials, Tasks etc. you can use "PIM Backup" which you can find in this thread.
Another way to backup for example contacts is to synchronize with a program on your PC like Outlook.
<reserved>
<reserved>
Good work buddy, this must be sticky.
Great overview, simply and all in one.
Good work, thx
Great work! thank's for the tutorial it answered me lots of questions I had!
as always your the noobs best frnd
learned something new today. downloaded wwe Asia ship(2) 1.32.729.3(72483), one that the model number of your phone is known by the firmware. my t3333 changed into t3320 :/. for guys looking for stock English roms, this is no go.
Gothik said:
learned something new today. downloaded wwe Asia ship(2) 1.32.729.3(72483), one that the model number of your phone is known by the firmware. my t3333 changed into t3320 :/. for guys looking for stock English roms, this is no go.
Click to expand...
Click to collapse
I am using this WWE asia ROM, and my system says T3333: http://rapidshare.com/files/3001039...Radio_Signed_61.41t.25.31_3.48.25.27_Ship.exe
yellowfever said:
I am using this WWE asia ROM, and my system says T3333: http://rapidshare.com/files/3001039...Radio_Signed_61.41t.25.31_3.48.25.27_Ship.exe
Click to expand...
Click to collapse
read properly...
Gothik said:
read properly...
Click to expand...
Click to collapse
I was just trying to suggest a different WWE ASIA rom for you, which does not have the issue you mentioned. Sorry if this answer did not meet your expectations.
Question
Hi!
Thank you for this thread.
I have a question. You wrote that you need the HSPL cause a branded Phone blocks custom roms. How about an unbranded phone?
Weatherlights said:
Hi!
Thank you for this thread.
I have a question. You wrote that you need the HSPL cause a branded Phone blocks custom roms. How about an unbranded phone?
Click to expand...
Click to collapse
Not just branded phones, you can not install wwe rom to italian device,you can not install WWE rom to asian wwe device, etc.
If there is an error during flash (hard drive fail, blackout), your device wont be a brick, you can step to bootloader and flash again.
So the best way to install hard-spl, and you can do anything
Upgrade or instal a new ROM
Hi yellowfeaver,
I find your review very good and clear.
But I have just one question:
Is there a possibilities to upgrade or install a new ROM in my Mega under the Windows 7 ultimate x 64?
Everything I'll try, evan the hard SPL, it give me an error.
Is an incompatibilities with this OS, is necessary to install a x86 version of Windows 7, or this kind of problem is for all x64 Windows OS?
Thanks in advance and for your advice,
Best regards,
ok guys any one answering it?
imo if active sync or w.e comes pre installed with win7 workd and detects your mega, then everything should go fine. but of course i don't even recommend win7 for his. goto someone with win xp and get it done.
Win 7x64
Hi Gothic,
As I say the x64 of Windows Mobile Device Center 6.1( for Windows 7 x64) does not recognized my Mega for HSPL and ROM's. Is working well for files transfer, internet share etc
Before I've installed the x64 version on my PC, with HTC Artemis I was able to do everything - HSPL, the new ROM's, file transfer etc - but I never used for Mega because at that time it wasn't an HSPL for Mega. Meanwhile I installed the x64 Windows 7 OS and I couldn't use this OS for Artemis and I realized that for Mega also.
Because are two versions of Windows Mobile Device Center 6.1 ( x86 and x64 ) and in Windows 7 x64 is already created the x86 directory for this kind of applications I will give a try to the version x86. Why not?
I'll be back with a result.
Thanks anyway for your answer,
Best regards
Win7 x64
Definitively refuse to work.
Maybe a new HSPL for this OS will be solve this problem.
I flash every my rom on Win 7 x64, so it goes....
gabrielmihai said:
Is there a possibilities to upgrade or install a new ROM in my Mega under the Windows 7 ultimate x 64?
Click to expand...
Click to collapse
czdjj said:
I flash every my rom on Win 7 x64, so it goes....
Click to expand...
Click to collapse
then why don't you solve his problem?
HardSPL finally done
Hi,
Thanks for your help.
The solution it was to change one registry in to the WM. Thanks to jockyw2001 for his HSPL and all developers who search for the solutions.
"still doesn't work look up this registry key in the phone:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\EXT_FLASHDRV]
Change the value "Dll" from "OEM_FLASHDRV.dll" to "OEM_FLASHDRVXXX.dll" and reboot the device. After rebooting into WM and after activesync is ready run flash-hardspl.bat . Check in tricolour bootloader screen if it is installed and then boot again into WM and change the registry value back to its old value."
Best Regards,
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the unbranded ROM: RUU_Surround_TELUS_WWE_1.03.502.07_Radio_5.51.09.06_22.30.50.09U
A. Pre-Requisites
If your Surround is flashed with a ROM of the following releases:
1. RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U
2. RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following unbranded ROM and when you like you can comeback to your previous ROM
In case your Surround is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.661 i.e. with characteristic value 661
then you can also flash the following unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Surround_TELUS_WWE_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar
2. Download this zip ROM file: RUU_Surround_TELUS_WWE_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Surround will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Surround will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Does this rom have the nodo update in it and have you removed the telus start up splash screen?
mcsc said:
Does this rom have the nodo update in it and have you removed the telus start up splash screen?
Click to expand...
Click to collapse
Hi,
It is not a NoDo ROM and TELUS start up splash screen not included
Note that has CV 502 i.e. unbrands to Cingular_US
Regards, ansar
Dear Ansar, the first link (B1) is down, please reupload.
Thanks
Surround ATT
1.03.502.07
Radio_5.51.09.06_22 .30.50.09H
OS 7.0.7004.0
Language
Hi, can you change the language in this unbranded ROM? what languages are available thanks! greets!
Omar Nunez said:
Dear Ansar, the first link (B1) is down, please reupload.
Thanks
Surround ATT
1.03.502.07
Radio_5.51.09.06_22 .30.50.09H
OS 7.0.7004.0
Click to expand...
Click to collapse
Hi,
It will be fixed, thnx!
Regards, ansar
javigc said:
Hi, can you change the language in this unbranded ROM? what languages are available thanks! greets!
Click to expand...
Click to collapse
Hi,
It has English (0409) only and is for those of TELUS that like Cingular_US
Regards, ansar
i got vendor id error ???
benzersizadam said:
i got vendor id error ???
Click to expand...
Click to collapse
Are you trying to use this ROM on a device from AT&T? Because that's the reason for my Surround; I cannot flash the TELUS ROMs on it.
yes my device is at&t i want to make it unbranded
I also would like to debrand my att surround .
Is there anyway to flash telus rom to at&t device?
Is there anyway to flash telus rom to at&t device? I heard that telus rom support spanish and I need spanish keyboard. Does goldcard work for surround?
chettang said:
Is there anyway to flash telus rom to at&t device? I heard that telus rom support spanish and I need spanish keyboard. Does goldcard work for surround?
Click to expand...
Click to collapse
Hi,
There is no yet a ROM for AT&T operator
Regards, ansar
cingular rom as same as AT&T
hi
Can some one help me on this
i update my phone to the NODO and i can't unlock whit Chevron no more
the programme give my the Classic error message (Sorry,I'm having trouble communicating whit the phone. -please sure it's conected using USB - Please start the Zune application)
So i flash my rom whit the RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U (because i have a telus phone) and it work fine.
Now i try to use the Chevron software again to unlock the phone and guess what .Got the same error message After flashing my Surround.
Need to know why i still got that message.Could it be because Zune have some kind of programe that block Chevron software to realise the process .
Can some explain what that error message mean exactly went i try to unlock My phone.
i do all the step i wen to a lot of space(WWW) to see if a forgot to do a step
Please advise on this
Thanks
alkatoon82 said:
hi
Can some one help me on this
i update my phone to the NODO and i can't unlock whit Chevron no more
the programme give my the Classic error message (Sorry,I'm having trouble communicating whit the phone. -please sure it's conected using USB - Please start the Zune application)
So i flash my rom whit the RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U (because i have a telus phone) and it work fine.
Now i try to use the Chevron software again to unlock the phone and guess what .Got the same error message After flashing my Surround.
Need to know why i still got that message.Could it be because Zune have some kind of programe that block Chevron software to realise the process .
Can some explain what that error message mean exactly went i try to unlock My phone.
i do all the step i wen to a lot of space(WWW) to see if a forgot to do a step
Please advise on this
Thanks
Click to expand...
Click to collapse
chevron unlocking software doesnt work for nodo the author was taking into microsoft hands
sorry
Hi,
Flash a branded NOT NoDo ROM, install chevron and then flash NoDo via zune
Regards, ansar
My surround was having the Telus logo on startup after flashing it became AT&T, I thought it would be unbranded? (no operator logo on startup) does this mean that the device will be under AT&T's update discretion? Because when my Surround was under Telus, it had the update 7392, now it just on Nodo and wont have the security update after nodo.
kieboy said:
My surround was having the Telus logo on startup after flashing it became AT&T, I thought it would be unbranded? (no operator logo on startup) does this mean that the device will be under AT&T's update discretion? Because when my Surround was under Telus, it had the update 7392, now it just on Nodo and wont have the security update after nodo.
Click to expand...
Click to collapse
Hi,
This is an 7004 platform based ROM
That means you can chevron unlock it and side load anything
Regards, ansar
kieboy said:
My surround was having the Telus logo on startup after flashing it became AT&T, I thought it would be unbranded? (no operator logo on startup) does this mean that the device will be under AT&T's update discretion? Because when my Surround was under Telus, it had the update 7392, now it just on Nodo and wont have the security update after nodo.
Click to expand...
Click to collapse
Hi,
This is an 7004 platform based ROM
That means you can chevron unlock it and side load anything
Beware that there is no yet htc ROM for US
Regards, ansar
Hello guys. I need to ask some detailed information about latest leaked Mango update. I'm very unexperienced Windows Phone user.
I just bought a unbranded (without operator programs-logos) HTC Mozart. I want to flash my Mozart with latest leaked Mango ROM. My phone has a windows version of 7392 NoDo. I just downloaded the RUU exe file. What are the steps of installation? Please tell step by step. Can i jump into bootloader mode or just "connect phone to pc,run zune and run ruu exe?"
Please help me, i'm really unexperienced windows phone user. I had some android phones for 4 years, very experienced android user (even android rom installation) but these operating system is unfamiliar for me. I'm very glad if anybody help me
I searched all windows phone threads but didn't find any guide. What are the steps of installation of Official Mango Update? Please help!
1) make sure you've downloaded the right RUU rom for your phone, or have your phone security unlock
2) power off, press power & vol- buttons to boot, you'll see "security unlocked" at the top if it's unlocked
3) connect your phone to your PC, "serial" on the screen will turn to "USB"(if not, you have to install the windows mobile device center manually)
4) run the RUU on your PC, then the mango goes from here~ enjoy
WARN: MAKE SURE YOUR PHONE DID NOT INSTALL ANY RSPL/HSPL(check it on the same screen, right info is SPL xxxx)
Thanks for your reply I'm really appreciated.
can i install Europe update for unbranded device in Asia?
life25ak said:
can i install Europe update for unbranded device in Asia?
Click to expand...
Click to collapse
You should probably use the Asia ROM.
[DFT Freedom ROM] Mondrian mango 7720 V2 version
Updates:
20 Langs in one rom USA_ENG_FRA_ITA_GER_ESN_NLD_DAN_FIN_NOR_SVE_PTB_ PTG_RUS_ELL_HUN_CSY_PLK_JPN_KOR
Replace RUU_Mondrian_S_Cingular_US_4.03.502.00_5.69.09.05a_22.50.50_RELEASE new driver
Replace some of the new HTC XAP (from Titan ROM or Radar ROM or Market )
Open Internet sharing
Fully unlock with IE download XAP , can be immediately downloaded and install it , see picture under
XAP unlimited installation, dozens of XAP than can be installed, I installed more than 30 XAP which download from the market, fixed market XAP update/install issue from DFT Freedom 7720 version.
ROM built-in HTC Deck , Tango, TouchXplorer, Registry Editor, in the pass XAP only can be installed via computer, DFT developed DFTInstall.exe so now all the XAP can be build-into custom ROM , of course need to see will be over the size of 512, this tool is strictly prohibited any theft, unauthorized use exception.
Important Note
1. Before doing anything, make sure you have more than 50% battery!
2. You must have RSPL / HSPL installed on your device, download RSPL / HSPL see this http://www.darkforcesteam.com.cn ... & extra = page% 3D1
3. Supported Operating Systems: Windows XP, Windows Vista, Windows 7.
Disclaimer
This product is free of charge, at your own risk. We do not have any conflict, fault, or damage caused by the process of responsibility. Implied or otherwise, if you agree that any use of the product warranty. Did not find the problem, several different devices simultaneously to test this product, your experience may vary.
Products used for commercial purposes is strictly prohibited, and prohibited xda.cn & wpxap forum and reproduced with the use of intellectual ROM
For the protection of the DFT our official website and XDA - developers.com, it is not allowed within 5 days reproduced in this ROM, the column name well-known owners of this forum the forum three days after the group can reproduced without the application after five days free reproduced, reprinted, be sure to indicate the DFT produced the original post and add links
# Strongly prohibit any use made of the DFT ROM resources,
20 language versions download here
Code:
Password: 11/08/2011 @ DFT
Dark Forces Team Special thanks to TouchXplorer & Registry Editor author Julien Schapman allows us to these two software built into ROM.
Official DFT site (Chinese)
DarkForcesTeam Nov,2011
http://www.youtube.com/watch?v=KyTniK4AXUE&feature=channel_video_title
invalid password
Thanks a lot. I'll test.
@agushaha: have a space before 11/08/2011 @ DFT.
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
i cant open the file....
do you lnow why?????
nacho685 said:
i cant open the file....
do you lnow why?????
Click to expand...
Click to collapse
Chances are that you put the password in incorrectly
Thank's it's work
bmamo said:
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
Click to expand...
Click to collapse
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
hi guys,
I can't unzip. I have the latest winrar. I tried the password with and without the first space...
space before but no space between then.
perfect!
password is:
" 11/08/[email protected]" (without the ")
thanks
Advanced Config Not Working
Not sure if its a bug but it appears advanced config does not work with this rom.
I miss my custom grey theme already
NVM Reboot fixed it
My attempt at a tutorial
jesusodin said:
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
Click to expand...
Click to collapse
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
HTC update?
Got this "update" last night, does anybody know what it does???
Don't update. Your phone will become a brick if you update.
I tested. There are a few minor bugs eg: Errors column waves 3G,misspelled in the About
Model: HTC Mondrian
Carrier: HTC Sunnound T8788
Thank so much.
hello
When you unzip the file gives error unknown format or damaged
regards
rob243 said:
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
Click to expand...
Click to collapse
that thread says this:
WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke.
MORE INFORMATION HERE
--------
I have mango. therefore i understand i cannot change the rom am i right?
on the 3 colour screen i get the following:
PD26100 SS-BC (4K)
SPL-4.3.2250.0(128976) MNG
MicroP(LED) 0x09
TOUCH C1(v69)
Am I stuck on Mango?
Downgrade????
this is correct do not use the rspl/hspl if the numbers for the versions do not match
I had originally installed mango using the disconnect trick what I needed to do to install this was use the stock rom for my phone/provider to downgrade first for me it was Telus my provider, I found the rom here to put me back to pre-nodo like the phone was fresh out of the box.
THEN I was able to do the rspl/hspl then the DFT rom.
Also check under your battery for the model ID and verify its compatible with those posted in the RSPL/HSPL thread the model ID on my phone is PD26110 I can confirm with a pre-nodo rom and that model ID the rspl/hspl and the dft rom work perfectly
hello
someone upload the rom to another server and that gives me this error or damaged
regards
INTRODUCTION
I bought my phone a month ago but I do not have any plans to do any flashing thing about it except from having a developer-unlock WP7.5 OS. Yes, Windows Phone 7.5 Mango installed in my newly bought HTC 7 Mozart. Unfortunately, I was 3 days late when CheveronWP7 closed. 4 days of frustration and researching ways to have a developer-unlock phone and I finally decided have my SPL downgraded to 1.x from having an SPL 5.11 so I could just have a developer-unlock OS.
Some video was a little bit shaky because I was currently in a vacation and I don't have all my stuff for making a nice video plus I was just squatting around so it's really shaky (sometimes). Sorry.
A LITTLE PREPARATION THOUGH
You need to know your device's region. I am 707 so what's yours?
Quoting this information from this thread will let you know
Firmware revision number: 2250.09.16101.707
Your phone ROM version will be: 1.61.707.01
The characteristic value (CV) is: 707
You Operator name and CID i.e.: hTC_Asia with CID HTC_044. HTC_622 can be found with this CV from following classification:
1. 707: hTC_Asia operator, with CIDs HTC__044, HTC_622, HTC__021, HTC__038
2. 728: hTC_Asia_SEA operator, with CID HTC__023
3. 401: HTC_Europe operator, with CIDs HTC__001, HTC__Y13, HTC__405, HTC__016, HTC__032
4. 206: O2_UK operator, with CID O2__001
5. 073: Orange_FR operator, with CID ORANG202
6. 061: Orange_UK operator, with CID ORANG001
7. 841: Telstra operator, with CID TELST001
8. 112: TMO_AT operator, with CID T-MOB102
9. 113: TMO_CZ operator, with CID T-MOB004
a. 111: TMO_DE operator, with CID T-MOB101
Click to expand...
Click to collapse
This is the very first important thing you need to know before you begin. Then get a copy of your ROM here in this thread
A VIDEO GUIDE FROM DOWNGRADING YOUR SPL TO 1.xx
My phone was originally SPL 5.11 so I downgraded it to SPL1.26. Want to flash your custom ROM now?? THEN DOWNGRADE!!! NO MORE WAITING FOR ME!
Y-CABLE
Making a Y-CABLE is easy as tying your shoes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USB Extension Cable (white) - Php70 (insulated) - $1.59 (USD)
MicroUSB Cable (black) - Php120 (not insulated. disappointed with it) - $2.72 (USD)
1GB MicroSD (CD-R King) - Php180 - $4(USD)
Card Reader (Multiple card port / CD-R King) - Php50 - $1.13 (USD)
Total: Php 420 - $9.5 (USD)
DFT RSPL-HSPL
And of course, you have to HSPL your device http://forum.xda-developers.com/showthread.php?t=1195647 AS ALWAYS. I saw some guys asking if this is necessary .. well of course it is!
AND THE 28minutes 59seconds VIDEO
The number 28:59 means I done everything for less than 30minutes+ or so from downgrading my SPL to executing RSPL and HSPL.
You might hear some weird Beavis sound, sorry, that was me.. I'm just diverting because I was bit scared something bad might happen to my Mozart .. but it turns out that everything went well.
DOWNLOADS
GoldCardTool + goldcard.img
FLASHING CUSTOM ROM ON MY MOZART
SO TO SUMMARIZE EVERYTHING, HERE ARE THE STEPS TO UNLOCKING YOUR MOZART SO YOU CAN FLASH ANY CUSTOM ROM!
Step 1 - Know your region!
You can check check your region by going to:
Settings > about > click More Info button > Firmware revision number
e.g. Firmware revision number: 2250.09.16101.707
Your region is: 707
and your phone ROM version is: 1.61.707.01
So you belong in HTC_ASIA
refer here: http://forum.xda-developers.com/showthread.php?t=915827
Step 2 - Download your official ROM
So after confirming you're that for example you have HTC_ASIA, you can download your ROM here
http://forum.xda-developers.com/sho...401.03_Radio_5.51.09.06_22.30.50.09U_by_ansar
2.1 - Extract the compressed file
2.2 - Make a copy of RUU_Signed.nbh and rename it to MOZAIMG.nbh
Step 3 - Make your own Y-CABLE
It's extremely easy to make one. If you have already created or bought one then
Step 4 - Get a 1GB MicroSD Card
Guys, don't be hard headed, just get a 1GB MicroSD card if you want to have a flawless unlocking your phone.
4.1 - Reformat it with FAT32 File System and use "Default Allocation Table"
4.1 - Copy the MOZAIMG.nbh file to the root of your MicroSD Card.
Step 5 - Patch it with GoldCard tool
Make sure that you copied MOZAIMG.nbh
5.1 - Run GoldCardTool.exe
5.2 - Make sure the select HTC MMC is your newly reformatted MicroSD Card.
5.2 - Load GoldCard.img (the file is included in GoldCardTool_0.0.5.7z)
5.3 - If the patching was a success, then you're now safe for Step 6
Step 6 - Get everything setup and prepare your:
PC - Reboot! So to make sure everything is refreshed.
Phone - Take off the battery, put it back, turn in on while pressing VOL_DOWN_KEY + CAMERA_BUTTON until the screen said "USB HOST MODE"
Card Reader and MicroSD Card - Am pretty sure you know what to do
Y-CABLE - Connect your Phone and Card Reader and connect the male usb to one of the USB ports at the back of your PC (laptop? then just connect it)
Step 7 - Kiss your phone because the downgrading process will begin
Don't worry if after connecting, and still said "USB HOST MODE" because it will take about 3 - 5 minutes before the flashing begins. If it didn't start after like, give it a 7minutes grace period, then remove the Card Reader and put it back again. Still didn't work? Go get a new card reader
The downgrading process will reboot your phone once after it said
RADIO: OK then after it reboots, it will go back to "USB HOST MODE" and will say "Loading ..." immediately, if you didn't saw that, remove the Card Reader and insert again .. but again, the flashing will restart so it will go back to flashing the Radio again.
If everything went well, and you saw the "SUCCESS" message, you can reboot your phone and go to bootloader to check the SPL version. If the SPL version was successfully downgraded to 1.## then it's you lucky day! You can now move on to Step 8
Step 8 - DFT's RSPL and HSPL
Download those and refer to their manual http://forum.xda-developers.com/showthread.php?t=1195647 . If those didn't go well, then make sure you read everything it saids on their manual.
If that goes well, confirm it by rebooting and going to the bootloader, and you'll see the "HSPL" instead of "SPL" then the version.
If you saw the "HSPL" then you're safe to flashing your first
CUSTOM MOZART ROM!
If everything went well, you can have your Mozart unlocked with less than 30minutes
Disclaimer:
All of those steps were tested and proven. If something went wrong and your phone was bricked, then I don't take any responsibility of your actions. so make sure to read, read, read, and read!
TRICK MUSIC & VIDEO SO IT CAN DOWNLOAD ARTIST and ALBUM PICTURES, and ARTIST DETAILS.
If your country is not one of the list below:
Argentina, Australia, Austria, Belgium, Brazil, Canada, Chile, China, Colombia, Czech Republic, Denmark, Finland, France, Germany, Greece, Hong Kong, Hungary, India, Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, Russia, Singapore, South Africa, Spain, Sweden, Switzerland, Taiwan, United Kingdom, and the United States.
Music and Podcasts will not be available in Windows Phone Marketplace app and due to that, if you try to sync some of your favorite Americano artists, then MUSIC+VIDEO app will not be able to download Artists Pictures and details. MUSIC+VIDEO tile will just show the Zune icon, no MUSIC+VIDEO app background, and no lockscreen artists wallpaper (if enabled).
To get this feature, you need to signup a hotmail or live account and the country must be one of the lists above.
-- update --
not "above"
use United States!
reserved .............................
hey,
just one question.
does it have to be a micro sdcard reader ?
because when i'm trying it via usb stick, i become..
1. only "Enter USB Host Mode.."
2. when I try to stick it in it checks but then become it "Not Allow".
Is it because I use a usb stick instead of micro sdcard?
Regards,
diamond_vdf said:
hey,
just one question.
does it have to be a micro sdcard reader ?
because when i'm trying it via usb stick, i become..
1. only "Enter USB Host Mode.."
2. when I try to stick it in it checks but then become it "Not Allow".
Is it because I use a usb stick instead of micro sdcard?
Regards,
Click to expand...
Click to collapse
yeah probably.
Because it said "Not Allow" am not sure if that means if what you used was Not Allowed.. Most of the threads I checked before performing an SPL downgrade, was they're really specific to using "MicroSD" so I just followed it and use Micro SD instead of using 1 gb usb drive which I wanted to do the same before but I do not want to cause any problem with my Mozart .. so .. I used Micro SD.
okay, then I will try the microSD card today in the evening, just bought a logilink microSD usb reader.
maybe the reason why its not allowed is that a usb stick does need more usb power and the phone then didn't recognize the stick anymore? don't know..
i have tried the RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE.exe version to downgrade.. but i will try a version under the 1.30 also.
anyway, thank you for your tutorial! really helpful!
greetings
diamond_vdf said:
okay, then I will try the microSD card today in the evening, just bought a logilink microSD usb reader.
maybe the reason why its not allowed is that a usb stick does need more usb power and the phone then didn't recognize the stick anymore? don't know..
i have tried the RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50_RELEASE.exe version to downgrade.. but i will try a version under the 1.30 also.
anyway, thank you for your tutorial! really helpful!
greetings
Click to expand...
Click to collapse
alright goodluck mate!
hell yeah, mate.. it worked for me as well!!!
have downgraded it to spl 1.28 )) but i had to use the micro sd card and a tmobile DE (ger) rom..
thank you!!!
diamond_vdf said:
hell yeah, mate.. it worked for me as well!!!
have downgraded it to spl 1.28 )) but i had to use the micro sd card and a tmobile DE (ger) rom..
thank you!!!
Click to expand...
Click to collapse
awesome!!
my next task in Mozart is to have a surgery and upgrade the memory!! so watch out!
hi,
one question.
I have a problem, I do every step you write above and when I start the phone I got
1. Enter USB Host Mode..
2. Then "Loading.."
3. And then my phone restarts over and over again
Have any idea where I made a mistake
My firmware revision number is 2250.21.51101.11
so my CV is 111.
I try all 3 roms
9.1 BR: RUU_Mozart_TMO_DE_1.20.111.03_Radio_5.50.09.18_22. 24.50.09U_by_ansar
9.2 BR: RUU_Mozart_TMO_DE_1.25.111.05_Radio_5.50.09.18_22. 24.50.09U_by_ansar
9.3 BR: RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22. 24.50.09U_by_ansar
Thanks in advance
Regards.
miljanmicic said:
hi,
one question.
I have a problem, I do every step you write above and when I start the phone I got
1. Enter USB Host Mode..
2. Then "Loading.."
3. And then my phone restarts over and over again
Have any idea where I made a mistake
My firmware revision number is 2250.21.51101.11
so my CV is 111.
I try all 3 roms
9.1 BR: RUU_Mozart_TMO_DE_1.20.111.03_Radio_5.50.09.18_22. 24.50.09U_by_ansar
9.2 BR: RUU_Mozart_TMO_DE_1.25.111.05_Radio_5.50.09.18_22. 24.50.09U_by_ansar
9.3 BR: RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22. 24.50.09U_by_ansar
Thanks in advance
Regards.
Click to expand...
Click to collapse
It just said "Loading..." ? Did you ever wait until it flashes th Radio?
It never start to flash the Radio, it restart immediately after "Loading..", then again come
to "Loading.." and restarts. I wait about 10 restarts and still nothing happened, just restarting.
I find a solution,
it was my memory card. I try two 1gb cards and both do the same,
then I try one from 2GB and it works.
Thanks for tutorial!!!
miljanmicic said:
I find a solution,
it was my memory card. I try two 1gb cards and both do the same,
then I try one from 2GB and it works.
Thanks for tutorial!!!
Click to expand...
Click to collapse
great to know you got it working!!
thank you!!!
Thanks! This method really worked like a charm. I succeeded downgrading my HTC Mozart on my first try. Thanks a lot
adli89 said:
Thanks! This method really worked like a charm. I succeeded downgrading my HTC Mozart on my first try. Thanks a lot
Click to expand...
Click to collapse
great to know!!