[Unbranded ROM]RUU_Surround_TELUS_1.03.502.07_Radio_5.51.09.06_22 .30.50.09U by ansar - Surround Windows Phone 7 Development

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the unbranded ROM: RUU_Surround_TELUS_WWE_1.03.502.07_Radio_5.51.09.06_22.30.50.09U
A. Pre-Requisites
If your Surround is flashed with a ROM of the following releases:
1. RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U
2. RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following unbranded ROM and when you like you can comeback to your previous ROM
In case your Surround is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.661 i.e. with characteristic value 661
then you can also flash the following unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Surround_TELUS_WWE_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar
2. Download this zip ROM file: RUU_Surround_TELUS_WWE_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Surround will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Surround will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar

Does this rom have the nodo update in it and have you removed the telus start up splash screen?

mcsc said:
Does this rom have the nodo update in it and have you removed the telus start up splash screen?
Click to expand...
Click to collapse
Hi,
It is not a NoDo ROM and TELUS start up splash screen not included
Note that has CV 502 i.e. unbrands to Cingular_US
Regards, ansar

Dear Ansar, the first link (B1) is down, please reupload.
Thanks
Surround ATT
1.03.502.07
Radio_5.51.09.06_22 .30.50.09H
OS 7.0.7004.0

Language
Hi, can you change the language in this unbranded ROM? what languages are available thanks! greets!

Omar Nunez said:
Dear Ansar, the first link (B1) is down, please reupload.
Thanks
Surround ATT
1.03.502.07
Radio_5.51.09.06_22 .30.50.09H
OS 7.0.7004.0
Click to expand...
Click to collapse
Hi,
It will be fixed, thnx!
Regards, ansar

javigc said:
Hi, can you change the language in this unbranded ROM? what languages are available thanks! greets!
Click to expand...
Click to collapse
Hi,
It has English (0409) only and is for those of TELUS that like Cingular_US
Regards, ansar

i got vendor id error ???

benzersizadam said:
i got vendor id error ???
Click to expand...
Click to collapse
Are you trying to use this ROM on a device from AT&T? Because that's the reason for my Surround; I cannot flash the TELUS ROMs on it.

yes my device is at&t i want to make it unbranded

I also would like to debrand my att surround .

Is there anyway to flash telus rom to at&t device?
Is there anyway to flash telus rom to at&t device? I heard that telus rom support spanish and I need spanish keyboard. Does goldcard work for surround?

chettang said:
Is there anyway to flash telus rom to at&t device? I heard that telus rom support spanish and I need spanish keyboard. Does goldcard work for surround?
Click to expand...
Click to collapse
Hi,
There is no yet a ROM for AT&T operator
Regards, ansar

cingular rom as same as AT&T

hi
Can some one help me on this
i update my phone to the NODO and i can't unlock whit Chevron no more
the programme give my the Classic error message (Sorry,I'm having trouble communicating whit the phone. -please sure it's conected using USB - Please start the Zune application)
So i flash my rom whit the RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U (because i have a telus phone) and it work fine.
Now i try to use the Chevron software again to unlock the phone and guess what .Got the same error message After flashing my Surround.
Need to know why i still got that message.Could it be because Zune have some kind of programe that block Chevron software to realise the process .
Can some explain what that error message mean exactly went i try to unlock My phone.
i do all the step i wen to a lot of space(WWW) to see if a forgot to do a step
Please advise on this
Thanks

alkatoon82 said:
hi
Can some one help me on this
i update my phone to the NODO and i can't unlock whit Chevron no more
the programme give my the Classic error message (Sorry,I'm having trouble communicating whit the phone. -please sure it's conected using USB - Please start the Zune application)
So i flash my rom whit the RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U (because i have a telus phone) and it work fine.
Now i try to use the Chevron software again to unlock the phone and guess what .Got the same error message After flashing my Surround.
Need to know why i still got that message.Could it be because Zune have some kind of programe that block Chevron software to realise the process .
Can some explain what that error message mean exactly went i try to unlock My phone.
i do all the step i wen to a lot of space(WWW) to see if a forgot to do a step
Please advise on this
Thanks
Click to expand...
Click to collapse
chevron unlocking software doesnt work for nodo the author was taking into microsoft hands
sorry

Hi,
Flash a branded NOT NoDo ROM, install chevron and then flash NoDo via zune
Regards, ansar

My surround was having the Telus logo on startup after flashing it became AT&T, I thought it would be unbranded? (no operator logo on startup) does this mean that the device will be under AT&T's update discretion? Because when my Surround was under Telus, it had the update 7392, now it just on Nodo and wont have the security update after nodo.

kieboy said:
My surround was having the Telus logo on startup after flashing it became AT&T, I thought it would be unbranded? (no operator logo on startup) does this mean that the device will be under AT&T's update discretion? Because when my Surround was under Telus, it had the update 7392, now it just on Nodo and wont have the security update after nodo.
Click to expand...
Click to collapse
Hi,
This is an 7004 platform based ROM
That means you can chevron unlock it and side load anything
Regards, ansar

kieboy said:
My surround was having the Telus logo on startup after flashing it became AT&T, I thought it would be unbranded? (no operator logo on startup) does this mean that the device will be under AT&T's update discretion? Because when my Surround was under Telus, it had the update 7392, now it just on Nodo and wont have the security update after nodo.
Click to expand...
Click to collapse
Hi,
This is an 7004 platform based ROM
That means you can chevron unlock it and side load anything
Beware that there is no yet htc ROM for US
Regards, ansar

Related

[3 ROMs]Windows Phone 7 Branded ROMs for Surround, U/D on 31.03.2011, by ansar

Dear forum members,
A new ROM for the TELUS operator RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar added, in detail:
A. Updates Summary
31.03.2011
1. TELUS Operator New Branded ROM RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar added
2. [3] branded ROMs in total
19.03.2011
1. Classification for Operator name and CID is added, see section: [B. Notes Summary]
06.02.2011:
1. The thread is uploaded
2. TELUS Operator New Branded ROM RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar added
3. Cingular_US Operator Branded ROM RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar added
B. Notes Summary
Note 1:
In order to identify your Surround phone ROM version see in your phone settings>about>more information:
Firmware revision number: 2250.09.10307.502
Your phone ROM version will be: 1.03.502.07
The characterisric value (CV) is: 502
Your Operator name and CIDs i.e.: Cingular_US operator, with CID CWS__001 can be found with this CV from following classification:
1. 502: Cingular_US operator, with CID CWS__001
2. 661: TELUS operator, with CID TELUS001
In case your phone operator name and the above ROM version of your phone is included in section:
D. Windows Phone 7 Branded ROMs
where ROMs are listed in a template form, in order to minimize post space, and:
[BR] is for Branded Rom, to check if it applies to your phone operator
then:
1. You can safely flash your phone with a new version of a Branded ROM and then return to the initial Branded ROM
2. In case only your phone operator name is included then you can flash a Branded ROM but no return is feasible to the initial Branded ROM
If so you can also go at link of Note 2 to flash any available Radio Unbranded ROM of your phone operator
Then you can go at link of Note 3 to flash any available Unbranded ROM of your phone operator
Note 2:
For Radio Unbranded ROMs to flash your phone see this link: Windows Phone 7 Radio Unbranded ROMs for Surround
Note 3:
For Unbranded ROMs to flash your phone see this link: Windows Phone 7 Unbranded ROMs for Surround (Pending ...)
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
D. Windows Phone 7 Branded ROMs
All Branded ROMs are uploaded including the phone picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Cingular_US operator, with CID CWS__001:
1.1 BR: RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar
2. TELUS operator, with CID TELUS001:
2.1 BR: RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
2.2 BR: RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar
Till next version, enjoy!!!
Regards, ansar.
Post #2 reserved for future use.
Post #3 reserved for future use.
Post #4 reserved for future use.
Works perfectly
Thanks ansar, I'm not entirely sure of all the updates contained in this firmware, but it did sort out a few bugs
I picked up a surround from Telus on the first day of release, unlocked it and am now using it on Rogers.. One of the most notable features that's missing from these first gen surrounds is the lack of the "FIND" speech command... It's in the documentation, but it's not enabled in the original stock rom.
The TELUS rom you provided here enabled that, among a few other minor fixes.
Now the big question is; When NoDo is released, will it include firmware and radio updates?? Or will it be OS updates only?
ansar this software is not working in my hc surround, i got with the demo mode and flashed this rom but nothing changes, after a few minutes it goes back to demo mode.
i had a hd7 and it was on demo mode i flashed one of your roms and is fine now, why is not working in my surround?
Aoshi_ said:
Thanks ansar, I'm not entirely sure of all the updates contained in this firmware, but it did sort out a few bugs
I picked up a surround from Telus on the first day of release, unlocked it and am now using it on Rogers.. One of the most notable features that's missing from these first gen surrounds is the lack of the "FIND" speech command... It's in the documentation, but it's not enabled in the original stock rom.
The TELUS rom you provided here enabled that, among a few other minor fixes.
Now the big question is; When NoDo is released, will it include firmware and radio updates?? Or will it be OS updates only?
Click to expand...
Click to collapse
Hi,
We wil wait for the final NoDo version that probably will be a major one.
Thanks for supporting!!
Regards, ansar.
elmanortega said:
ansar this software is not working in my hc surround, i got with the demo mode and flashed this rom but nothing changes, after a few minutes it goes back to demo mode.
i had a hd7 and it was on demo mode i flashed one of your roms and is fine now, why is not working in my surround?
Click to expand...
Click to collapse
Hi,
Demo mode may also introduce CID problems and not only.
Which one did you flash, Cingular or TELUS?
Regards, ansar.
ansar.ath.gr said:
Hi,
Demo mode may also introduce CID problems and not only.
Which one did you flash, Cingular or TELUS?
Regards, ansar.
Click to expand...
Click to collapse
I flashed both cingular with the same result, it takes 5 seconds to get to 98% and 5 seconds from 98% to 100%. and the the unit reboots like new after a few swconds in the home screen all demo mode comes back.
elmanortega said:
I flashed both cingular with the same result, it takes 5 seconds to get to 98% and 5 seconds from 98% to 100%. and the the unit reboots like new after a few swconds in the home screen all demo mode comes back.
Click to expand...
Click to collapse
Hi,
If flashing is as you describe, this is the case that there is no actual flash taking place.
It is like a hard reset and that's why demo mode recovers.
You must disable demo mode with a registry change or otherway, and enter run mode.
Can you side load *.provxml or xap files, after chevron unlock?
Regards, ansar.
ansar.ath.gr said:
Hi,
If flashing is as you describe, this is the case that there is no actual flash taking place.
It is like a hard reset and that's why demo mode recovers.
You must disable demo mode with a registry change or otherway, and enter run mode.
Can you side load *.provxml or xap files, after chevron unlock?
Regards, ansar.
Click to expand...
Click to collapse
how do i do that???
elmanortega said:
how do i do that???
Click to expand...
Click to collapse
Hi,
Can you chevron unlock it?
Can you side load *.provxml or xap files, after chevron unlock?
See hacking and development thread for details.
Regards, ansar.
elmanortega said:
how do i do that???
Click to expand...
Click to collapse
You dont need to. I successfully flashed a demo-mode surround successfully.
Just do a hard reset
1. hold vol-up/vol-down, power on while holding
2. release, follow hard reset instructions
3. pull the battery before it reboots
4. boot it in boot-loader mode and flash successfully!
also, question for ansar... if i flash an unbranded rom to my htc surround, will it still be sim-locked?
sidicious said:
You dont need to. I successfully flashed a demo-mode surround successfully.
Just do a hard reset
1. hold vol-up/vol-down, power on while holding
2. release, follow hard reset instructions
3. pull the battery before it reboots
4. boot it in boot-loader mode and flash successfully!
also, question for ansar... if i flash an unbranded rom to my htc surround, will it still be sim-locked?
Click to expand...
Click to collapse
you are a geniuos
done
flashing will not lock your cell
another hack done by xda developers
ansar.ath.gr said:
Dear forum members,
The thread is uploaded and Operator Branded ROMs added, in detail:
A. Updates Summary
06.02.2011:
1. The thread is uploaded
2. TELUS Operator New Branded ROM RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar added
3. Cingular_US Operator Branded ROM RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar added
4. [2] Branded ROMs in total
B. Notes Summary
Note 1:
In order to identify your phone ROM version see in the settings>about>more information:
Firmware revision number: 2250.09.16101.207
Your phone ROM version will be: 1.61.207.01
You will also need to know your operator name i.e.: Cingular_US, TELUS etc
This name is derived from the store/source you received your phone
In case your phone operator name and the above ROM version of your phone is included in section:
D. Windows Phone 7 Branded ROMs
where ROMs are listed in a template form, in order to minimize post space, and:
[BR] is for Branded Rom, to check if it applies to your phone operator
then:
1. You can safely flash your phone with a new version of a Branded ROM and then return to the initial Branded ROM
2. In case only your phone operator name is included then you can flash a Branded ROM but no return is feasible to the initial Branded ROM
If so you can also go at link of Note 2 to flash any available Radio Unbranded ROM of your phone operator
Then you can go at link of Note 3 to flash any available Unbranded ROM of your phone operator
Note 2:
For Radio Unbranded ROMs to flash your phone see this link: Windows Phone 7 Radio Unbranded ROMs for Surround
Note 3:
For Unbranded ROMs to flash your phone see this link: Windows Phone 7 Unbranded ROMs for Surround (Pending ...)
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
D. Windows Phone 7 Branded ROMs
All Branded ROMs are uploaded including the phone picture:
1. Cingular_US operator, with CID CWS__001:
1.1 BR: RUU_Surround_Cingular_US_1.03.502.07_Radio_5.51.09.06_22.30.50.09U_by_ansar
2. TELUS operator, with CID TELUS001:
2.1 BR: RUU_Surround_TELUS_WWE_1.04.661.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar
Till next version, enjoy!!!
Regards, ansar.
Click to expand...
Click to collapse
Thank you very much for the support ... can you tell me what language they bring? now that I have the original AT & T and is only in English. I need Spanish ... gives a rom that you posted on the forum is set to that language later?
Another important thing, to change flash 3G bands? that I do not want to fail then the 3G (I use the 850 band, who have phones from AT & T)
Thank you very much again for your input.
Greetings
Hi,
Thread is updated with Classification for Operator name and CID.
Regards, ansar.
languaje
Thanks for your work.
This ROM for Cingular is multilingual? I will need spanish.
waiting for new surround NoDo update. any news on that?
waiting for unlocking procedure for surround i need this in spanish
kalon3344 said:
Thanks for your work.
This ROM for Cingular is multilingual? I will need spanish.
Click to expand...
Click to collapse
Hi,
No, only 0409 English keyboard
The other ROM, TELUS supports Spanish too.
Regards, ansar

[Q] Please Help for Official Mango Update

Hello guys. I need to ask some detailed information about latest leaked Mango update. I'm very unexperienced Windows Phone user.
I just bought a unbranded (without operator programs-logos) HTC Mozart. I want to flash my Mozart with latest leaked Mango ROM. My phone has a windows version of 7392 NoDo. I just downloaded the RUU exe file. What are the steps of installation? Please tell step by step. Can i jump into bootloader mode or just "connect phone to pc,run zune and run ruu exe?"
Please help me, i'm really unexperienced windows phone user. I had some android phones for 4 years, very experienced android user (even android rom installation) but these operating system is unfamiliar for me. I'm very glad if anybody help me
I searched all windows phone threads but didn't find any guide. What are the steps of installation of Official Mango Update? Please help!
1) make sure you've downloaded the right RUU rom for your phone, or have your phone security unlock
2) power off, press power & vol- buttons to boot, you'll see "security unlocked" at the top if it's unlocked
3) connect your phone to your PC, "serial" on the screen will turn to "USB"(if not, you have to install the windows mobile device center manually)
4) run the RUU on your PC, then the mango goes from here~ enjoy
WARN: MAKE SURE YOUR PHONE DID NOT INSTALL ANY RSPL/HSPL(check it on the same screen, right info is SPL xxxx)
Thanks for your reply I'm really appreciated.
can i install Europe update for unbranded device in Asia?
life25ak said:
can i install Europe update for unbranded device in Asia?
Click to expand...
Click to collapse
You should probably use the Asia ROM.

[DFT Freedom ROM] Mondrian mango 7720 V2 version

[DFT Freedom ROM] Mondrian mango 7720 V2 version
Updates:
20 Langs in one rom USA_ENG_FRA_ITA_GER_ESN_NLD_DAN_FIN_NOR_SVE_PTB_ PTG_RUS_ELL_HUN_CSY_PLK_JPN_KOR
Replace RUU_Mondrian_S_Cingular_US_4.03.502.00_5.69.09.05a_22.50.50_RELEASE new driver
Replace some of the new HTC XAP (from Titan ROM or Radar ROM or Market )
Open Internet sharing
Fully unlock with IE download XAP , can be immediately downloaded and install it , see picture under
XAP unlimited installation, dozens of XAP than can be installed, I installed more than 30 XAP which download from the market, fixed market XAP update/install issue from DFT Freedom 7720 version.
ROM built-in HTC Deck , Tango, TouchXplorer, Registry Editor, in the pass XAP only can be installed via computer, DFT developed DFTInstall.exe so now all the XAP can be build-into custom ROM , of course need to see will be over the size of 512, this tool is strictly prohibited any theft, unauthorized use exception.
Important Note
1. Before doing anything, make sure you have more than 50% battery!
2. You must have RSPL / HSPL installed on your device, download RSPL / HSPL see this http://www.darkforcesteam.com.cn ... & extra = page% 3D1
3. Supported Operating Systems: Windows XP, Windows Vista, Windows 7.
Disclaimer
This product is free of charge, at your own risk. We do not have any conflict, fault, or damage caused by the process of responsibility. Implied or otherwise, if you agree that any use of the product warranty. Did not find the problem, several different devices simultaneously to test this product, your experience may vary.
Products used for commercial purposes is strictly prohibited, and prohibited xda.cn & wpxap forum and reproduced with the use of intellectual ROM
For the protection of the DFT our official website and XDA - developers.com, it is not allowed within 5 days reproduced in this ROM, the column name well-known owners of this forum the forum three days after the group can reproduced without the application after five days free reproduced, reprinted, be sure to indicate the DFT produced the original post and add links
# Strongly prohibit any use made of the DFT ROM resources,
20 language versions download here
Code:
Password: 11/08/2011 @ DFT
Dark Forces Team Special thanks to TouchXplorer & Registry Editor author Julien Schapman allows us to these two software built into ROM.
Official DFT site (Chinese)
DarkForcesTeam Nov,2011
http://www.youtube.com/watch?v=KyTniK4AXUE&feature=channel_video_title
invalid password
Thanks a lot. I'll test.
@agushaha: have a space before 11/08/2011 @ DFT.
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
i cant open the file....
do you lnow why?????
nacho685 said:
i cant open the file....
do you lnow why?????
Click to expand...
Click to collapse
Chances are that you put the password in incorrectly
Thank's it's work
bmamo said:
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
Click to expand...
Click to collapse
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
hi guys,
I can't unzip. I have the latest winrar. I tried the password with and without the first space...
space before but no space between then.
perfect!
password is:
" 11/08/[email protected]" (without the ")
thanks
Advanced Config Not Working
Not sure if its a bug but it appears advanced config does not work with this rom.
I miss my custom grey theme already
NVM Reboot fixed it
My attempt at a tutorial
jesusodin said:
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
Click to expand...
Click to collapse
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
HTC update?
Got this "update" last night, does anybody know what it does???
Don't update. Your phone will become a brick if you update.
I tested. There are a few minor bugs eg: Errors column waves 3G,misspelled in the About
Model: HTC Mondrian
Carrier: HTC Sunnound T8788
Thank so much.
hello
When you unzip the file gives error unknown format or damaged
regards
rob243 said:
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
Click to expand...
Click to collapse
that thread says this:
WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke.
MORE INFORMATION HERE
--------
I have mango. therefore i understand i cannot change the rom am i right?
on the 3 colour screen i get the following:
PD26100 SS-BC (4K)
SPL-4.3.2250.0(128976) MNG
MicroP(LED) 0x09
TOUCH C1(v69)
Am I stuck on Mango?
Downgrade????
this is correct do not use the rspl/hspl if the numbers for the versions do not match
I had originally installed mango using the disconnect trick what I needed to do to install this was use the stock rom for my phone/provider to downgrade first for me it was Telus my provider, I found the rom here to put me back to pre-nodo like the phone was fresh out of the box.
THEN I was able to do the rspl/hspl then the DFT rom.
Also check under your battery for the model ID and verify its compatible with those posted in the RSPL/HSPL thread the model ID on my phone is PD26110 I can confirm with a pre-nodo rom and that model ID the rspl/hspl and the dft rom work perfectly
hello
someone upload the rom to another server and that gives me this error or damaged
regards

Update the HTC TITAN for Zune

Update the HTC TITAN for Zune
Release Date: 2012-05-04
This update for HTC TITAN will let your phone to be successfully upgraded via Zune. (Microsoft Zune Error Code: 80070013 / 8007000F)
Requirements:
PC installed with Zune
Battery Capacity: At least 35%
OS Version: 7720 (7.10.7720.68) or later version
Installation Instructions:
Follow the instructions below to download and install the update on your phone:
From your phone device:
(a). With the phone turned off, press and hold the VOLUME DOWN and VOLUME UP buttons, and then briefly press the POWER button.
(b). Release the VOLUME DOWN and VOLUME UP button after you see the white screen with "security" on left-upper corner.
Use the USB cable to connect your phone with computer, You will see "USB" shown on screen of the phone.
From your computer:
(a). Click Download which is located at the bottom of this page to download this update (spl_2.6.160015.3_xxx.exe) onto your computer.
(b). Start the software update by executing the download file (spl_2.6.160015.3_xxx.exe), and follow the on-screen instructions.
Download
hi
Where is this spl coming from? Is this spl for EU or Att titan ?
Btw, I don't get any zune error without this sol. I have the last official sol 2.5
thanks
"Download" don't work, don't have link
missing link
rdebrito said:
missing link
Click to expand...
Click to collapse
Go to this link
http://www.htc.com/www/help/htc-titan/#download
Hmm what is this ? This is update to Tango/Mango Refresh or only bootloader to 2.6 version ? Anybody checked it ?
I think its only new bootloader. Flashing files and cca 800kB nbh file...
Hi
Did anyone got these errors on zune?? Because I didnt
Iosu
New Bootloader, Took few seconds to flash, Many Thanks
Budniu said:
Hmm what is this ? This is update to Tango/Mango Refresh or only bootloader to 2.6 version ? Anybody checked it ?
Click to expand...
Click to collapse
it's just the boot loader. That's all. Should not take more then a min to update.
What are the benefits of updating to this bootloader?
bennyj71 said:
What are the benefits of updating to this bootloader?
Click to expand...
Click to collapse
Good a question - what we get with new bootloader ?
Hello,
Probably only the resolution for the errors identified in Zune.
I never had these errors when I made the Titan updates, possibly some correction thinking in Tango future update?
Thanks,
Santos
sorry but's this update isn't for France Phone?
http://www.htc.com/fr/help/htc-titan/#troubleshooting-guide
or spain?
http://www.htc.com/es/help/htc-titan/#faq
.....
Hello,
This update is available in HTC Europe page, so it should be for all europe countrys I think, and not specifically to one or two
http://www.htc.com/europe/help/htc-titan/#download
Thanks,
Santos
My Titan is from Brazil, iv just updated it.
No problems at all.
@dAV84
For french http://dl4.htc.com/managed-assets/s...e/htc-titan-zune-RUU/spl_2.6.160015.3_FRA.exe
Modified "spl_2.6.160015.3_WWE.exe" en "spl_2.6.160015.3_FRA.exe"
I think this is only for the Titan's that have problems updating due to bootloader issues. I think there was a bad batch released which couldn't update through Zune because it fails between Step 6 - 8.
And there isn't any real benefit with updating the bootloaders. The more farther we go from v1.10, the less likely that we will have a full unlock or even interop for that matter!
Finally!!!!!
No combination of words can accurately describe my happiness of getting this update. After months of being stuck in 7740, my Hong Kong Titan can finally get updated to 8107 and install that HTC Firmware update just like everyone else's unbranded Titans!
Phil_123 said:
Finally!!!!!
No combination of words can accurately describe my happiness of getting this update. After months of being stuck in 7740, my Hong Kong Titan can finally get updated to 8107 and install that HTC Firmware update just like everyone else's unbranded Titans!
Click to expand...
Click to collapse
So you where getting the zune errors before ?
Sent from my TITAN X310e using Board Express

Severly Tested with Flashing!!

Ok, Im confused!!!
I have a HTC Mozart, with simlock to Orange UK
From the debranding/flashing guide found : http://forum.xda-developers.com/showthread.php?t=1002391 - I thought i followed it to the letter....
Download a ROM which is by the same network as you're on (for example if you're phone is currently locked to Orange UK then download RUU_Mozart_Orange_UK_1.22.061.10_Radio_5.50.09.18_ 22.24.50.09U, by ansar. - do not download 1.30!). Done
Open up ActiveSync/Mobile Device Center
Flash this ROM to your phone (you may not need to do this step, but most users will).
Turn your phone off.
Put your phone into Bootloader Mode - this can be done by pressing and holding the Volume Down Key & Power Button.
Plug your phone into your PC, hopefully a HTC USB driver will install.
Once the driver is installed your phone should display USB mode.
Extract the zip file and then run the exe file
Run through the update process
When your ROM is flashed, your phone will want you to customise it - just do the basic stuff.
Done all this - brilliant - I now have:
OS 7.0.7004.0
FW Rev No 2250.09.12210.061
HW Rev No 0004
Radio SW Vers 5.50.09.18_22.24.50.09u
Radio HW Vers A.102.0.D4
Bootloader 1.22.2250.10 (110809) 40
Download the ROM you would like to flash (e.g. RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33 b.50_RELEASE).
Extract the unbranded ROM zip file and then extract the exe file (WinZip will not do this - try 7zip or similar).
Copy the RUU_signed.nbh from the unbranded ROM
Extract the branded ROM exe
Paste the RUU_signed.nbh from the unbranded ROM to branded ROM
Plug your phone back into the PC in bootloader mode
Run RomUpdateUtility.exe file from the branded ROM (but with the unbranded RUU_signed.nbh file)
Follow the steps...
Et voila, you'll have (if all goes well) and unbranded ROM installed
Last step, plug your phone back into your PC and run Zune. Your phone should receive the latest cumulative update.
No matter what I do, this bit will not work!! I follow it to the letter! it either gets stuck at 0% then fails OR vendor ID wrong!! Plllllleeeease tell me what Im doing wrong...! and what I need to do to get this thing running A ok again!!! At this minute, Ive connected this to Zune and the Feb 11 update will not install - keeps telling me to unplug and reconnect..... I think after 3 hours of trying - I think its as good as its gonna get! lol
I was trying to get the internet tethering thing done as Id seen the euro update seems for some users at least to be working..... (dont shoot!) lol
Can anyone help??
Hi piggyman1978, u got vendor ID wrong because u cannot flash custom rom without HSPL try search from forum ... cheerz
Sorry - thread needs deleting now - solved - thank you for your help!

Categories

Resources