Hey,
some of you had interupted the camera firmware upgrade to original Eclair (2.1) Update. This is caused because you shut off the phone when you saw the flashing Camera Icon on the phone. THIS WAS THE CAMERA FIRMWARE UPDATE!
The User lipali reported that it works, so i decided to make a little batch-script for you.
Note: You should be on a ROOTED original SE Eclair Rom (2.1) to have all needed scripts in place.
1.) Activate USB-Debugging on phone
2.) EXTRACT the attached ZIP file
3.) Connect your phone to PC
4.) Start the RunMe.bat and follow the instructions
Please report if this works for you, this is a TEST!
Dont blame me if you **** up your phone in some way.
Best Regards
Bin4ry
I just hope the cam shall be fixed It'll be epic
Thanks a lot dude, I was looking for these files !
Gotta test this...
It works!!!
What iI've done?
copy files from Bin4ry to folders /system/etc/firmware and /system/bin
In next step I goes to the root explorer and execute script init.es09ra.rc. Later I rebooted phone. Waiting while icons with camera and phone is blinking (few long minutes...) and after that phone rebooted. Later I start camera apps and.. it works... THANKS A LOT (yes, this is scream ) And sorry for my english. I'm so excited.
.............
what does this actually do ? does it fix video camera for 2.2?
SE 2.1 (.435) But, i think it will be working on every rom. Just execute this script
This is for fixing camera when it broke while updating 1.6 -> 2.1 and not for Custom ROMs.
Ah I thought this was a miracle for 2.2/2.3
lipali said:
It works!!!
What iI've done?
Click to expand...
Click to collapse
Lipali which firmware did you execute this on? Please tell me it was GB 2.3.3 it's great this is working.. now all we need is the camera working on Froyo+
lipali said:
It works!!!
What iI've done?
copy files from Bin4ry to folders /system/etc/firmware and /system/bin
In next step I goes to the root explorer and execute script init.es09ra.rc. Later I rebooted phone. Waiting while icons with camera and phone is blinking (few long minutes...) and after that phone rebooted. Later I start camera apps and.. it works... THANKS A LOT (yes, this is scream ) And sorry for my english. I'm so excited.
Click to expand...
Click to collapse
would u b kind enough to tell us on which rom u were testin it on?
Like I said before:
This is for fixing camera when it broke while updating 1.6 -> 2.1 and not for Custom ROMs.
oh my phone
my phone not work.i user CM7.0 RC2-V008a.
lollylost100 said:
Like I said before:
This is for fixing camera when it broke while updating 1.6 -> 2.1 and not for Custom ROMs.
Click to expand...
Click to collapse
sorry
my mistake
i was like readin the 1st post by binary n the title makes me think otherwise
will read carefully next time
cheers
lollylost100 said:
Like I said before:
This is for fixing camera when it broke while updating 1.6 -> 2.1 and not for Custom ROMs.
Click to expand...
Click to collapse
No, but since it's already properly decompiled, it may be the key the dev's need to get HD cam running on 2.3/2.3
MrHassell said:
Lipali which firmware did you execute this on? Please tell me it was GB 2.3.3 it's great this is working.. now all we need is the camera working on Froyo+
Click to expand...
Click to collapse
Can't you even read the posts before ?? It is said NOT for custom 2.2+...
... At least, not yet.
Wht are we talking here...
My camera works fine. Is it new upgrade? If it is what is the difference.
Bin4ry said:
Hey,
some of you had interupted the camera firmware upgrade to original Eclair (2.1) Update. This is caused because you shut off the phone when you saw the flashing Camera Icon on the phone. THIS WAS THE CAMERA FIRMWARE UPDATE!
The User lipali reported that it works, so i decided to make a little batch-script for you.
Note: You should be on a ROOTED original SE Eclair Rom (2.1) to have all needed scripts in place.
1.) Activate USB-Debugging on phone
2.) EXTRACT the attached ZIP file
3.) Connect your phone to PC
4.) Start the RunMe.bat and follow the instructions
Please report if this works for you, this is a TEST!
Dont blame me if you **** up your phone in some way.
Best Regards
Bin4ry
Click to expand...
Click to collapse
Sent from my X10i using XDA App
TechGuru_x10 said:
Wht are we talking here...
My camera works fine. Is it new upgrade? If it is what is the difference.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
This is a fix of non working cameras for the few unlucky failing upgrade of ROM from 1.6 to 2.1.
NOT FOR 2.2/2.3.
TechGuru_x10 said:
Wht are we talking here...
My camera works fine. Is it new upgrade? If it is what is the difference.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Some people reported that Camera Stopped working after the upgrade from 1.6 to 2.1. Do you remember that after updating there was an image with an Arrow and the Camera? Well, some users rebooted the phone while doing this process wich pretty much ****ed up the camera and was useless no matter what 2.1 firmware you flash on it because the camera was ****ed up since the beginning.
So Bin4ry compiled the script and now all those users with problems can upgrade the camera and have it fully working on 2.1
That's what i get from it... I could be wrong
Jim
MrHassell said:
Lipali which firmware did you execute this on? Please tell me it was GB 2.3.3 it's great this is working.. now all we need is the camera working on Froyo+
Click to expand...
Click to collapse
even if it works in GB 2.3.3 why you want in froyo while you have the camera working in GB? guys let's find a way to help j for implementing the HD camera .
Related
These roms are flashable with xRecovery 0.1 (backup restore)
update 1
slightly updated AOSP rom to try :
AOSP 2.1 v.0.1
update 2
firmware load fixed, vibrate fixed, some other small fixes.
AOSP 2.1 v.0.2
Todo:
Voicecalls (GSM/3G)
Location services
Google checkin provider
Camera
reserved.............
only if we could mount sdcard and start adb logcat we could investigate further..
It was nice to roam around in 2.2
If we want to create working rom we should know which files from the original ROM are the drivers so we can take them and try to put them in the custom rom.Otherwise froyo will not be able to interact with our specific hardware.
you can ask some one more experians in custom roms so he could recognise the drivers
even if he don't have x8
remember: just ask for help , dont be rude and ask for custom rom
sorry for my bad english and for my interrubed
i am building a working one please wait. i have discovered the drivers and etc.
When it will be ready for test?
trapacska said:
i am building a working one please wait. i have discovered the drivers and etc.
Click to expand...
Click to collapse
nice info... i will waiting
hugerth said:
When it will be ready for test?
Click to expand...
Click to collapse
i started, i trying, i will share it as soon as i can! i would not like to share sh*t, because the working rom is better than a wrong one.
It's just about changing drivers? I would be too easy I think...
hugerth said:
It's just about changing drivers? I would be too easy I think...
Click to expand...
Click to collapse
no, there is some conf file and etc what i have to change.
trapacska said:
no, there is some conf file and etc what i have to change.
Click to expand...
Click to collapse
Share your finds..
One error which i am constantly getting is concerning gralloc any idea whats it about?
trapacska said:
i started, i trying, i will share it as soon as i can! i would not like to share sh*t, because the working rom is better than a wrong one.
Click to expand...
Click to collapse
I want to try this as soon as possible it will be great to have froyo run on my X8.
Thank you for your effort.
And Happy New Year !
trapacska said:
i started, i trying, i will share it as soon as i can! i would not like to share sh*t, because the working rom is better than a wrong one.
Click to expand...
Click to collapse
Best of Luck mate....
any progress? any good news for 2.2 froyo for our x8s??
any updates about the custom 2.2 froyo rom ?
now a little bit work, but just some minutes, and it says system is not responding and restart, but not full restart, just it get to the boot animation and then start.
the first step: i have to make it work, patches and drivers the second step. i tryed much thing to get working it, and i am sure i am not as far as i was.
I really hope that you will get this running because as it seams this will be the only way to get Froyo or Gingerbread on our X8.
Hope you will make this works. And if I can help with something let me know.
Hope this helps zdzihu released sources for his x10 froyo rom
Zdzihu x10 froyo source
trapacska said:
now a little bit work, but just some minutes, and it says system is not responding and restart, but not full restart, just it get to the boot animation and then start.
the first step: i have to make it work, patches and drivers the second step. i tryed much thing to get working it, and i am sure i am not as far as i was.
Click to expand...
Click to collapse
Maybe it's power managment, display, or some other driver problem? Or kernel?
NOTICE: This isn't my work. I've just followed this thread http://forum.xda-developers.com/showthread.php?t=963162 to make it work on X8
All thanks goes to zdzihu for xrecovery and offline charging fix and to genyt and weissgold for their guide
For stock 2.1.1.A.0.6 firmware (don't work with custom roms):
Installation:
1. root phone
2. install Busybox
3. download xrecovery with offline charging.zip
4. extract archive to SD Card
5. with Root Explorer put extracted files to /system/bin
Or install latest xRecovery with FlashTool 0.2.8
For custom roms you also need the files in /system/etc/semc/chargemon/ from stock ROM.
ponanovn said:
For custom roms you also need the files in /system/etc/semc/chargemon/ from stock ROM.
Click to expand...
Click to collapse
Thanks for advice, I'll try it.
Help! I have a problem. I copied files to "/ system / bin", and now does not work xrecovery. and when I turn on my mobile no applications are launched, the application has stopped unexpectedly
I have version 2.2.1 CM Floyd v0.15
please help!
sorry for my english
dbts25 said:
This is for stock 2.1.1.A.0.6 firmware!!!
Don't know if it works with older firmware or with custom roms
Click to expand...
Click to collapse
I said it in first post that it is for stock firmware. If you want it for floyo I can try to make it work too. You must reinstall firmware with SEUS or FlashTool and install Floyo again
daanieloow said:
Help! I have a problem. I copied files to "/ system / bin", and now does not work xrecovery. and when I turn on my mobile no applications are launched, the application has stopped unexpectedly
I have version 2.2.1 CM Floyd v0.15
please help!
sorry for my english
Click to expand...
Click to collapse
you should read the first post clearly mate
dbts25 said:
I said it in first post that it is for stock firmware. If you want it for floyo I can try to make it work too. You must reinstall firmware with SEUS or FlashTool and install Floyo again
Click to expand...
Click to collapse
thank you very much friend
just asking...does it makes stuck on boot?(offline charging for floyo 0.15)...sorry if i ask this thanks before mate...
progress : after installed my phone get force close all app...i use offline charging floyo 0.015 on my floyo
Don't know where is problem. For me it runs ok
i have follow the instruction clearly...or it should be install the xrecovery files first from the attachment(that seems x10 xrecovery..if i'm not wrong) and then copy those floyo offline charging files?...for you it runs ok,but not on my phone.so wierd isn't it?
Yes it is weird. You don't need to install xrecovery it is preinstalled in floyo. You only need to put chargemon and charger to /system/bin and semc folder to /system/etc
yep...that was i'm doin' as your instructions...twice i try and unsucsessfull,the x recovery can't runs when i pressing the back button on booting...
fully working on stock 2.1.1.A.0.6 THANKS!
I'm stock in sony ericsson logo..
Will this work on a CM7 2.3.3 ROM as well?
Roland
Rolandh said:
Will this work on a CM7 2.3.3 ROM as well?
Roland
Click to expand...
Click to collapse
No. In which one? I can try to make it work
dbts25 said:
No. In which one? I can try to make it work
Click to expand...
Click to collapse
I'm using jerpelea Gingerbread CM7 2.3.3 RC 2 v006a.
Roland
http://www.multiupload.com/70KO36BEV0 TRY THIS BETA ROMS IT MADE THIS ROMS IS VERY SIMPLE TO WORK ON XPERIA8 WITH ALL COUNTRY WORKING NAVIGATION GOOGLE MAP FOR GMAIL TRY DOWNLOAD FROM MARKET BUGS BRIGTHNESS LINKNOT WORK 2 VIDEO RECORDING NOT WORK IF SU TRY UPDATE FROM MARKET TRY NOT UPDATE IT FRIST BACKUP UR OLD ROMS TRY IT OWN RISK
sanefirst said:
I decided to give it a try, so I can write something about this ROM:
First of all, IT IS REAL AND IT WORKS!
Rom is pre-rooted
xRecovery preinstalled
Includes reboot to "Bootloader/Recovery/Reboot" script
Looks like clean Android 2.2.1
Boot animation tells that it is "OpenFire"
http://openfire.droidroms.com/
Works:
3G,
3MPX Camera,
GSM,
Youtube normal & HD,
Screen rotation,
Market,
Headphones detection
^^for sure
not sure about the rest - didn't test
Bugs:
Video Recording
SD Card Safe to Remove!!!! after exiting Root Explorer
Autobrightness doesn't work properly
EDIT:
ROM is light, fast & quite stable - some FCs (Youtube first run, Root Explorer first run, Market random), but only at the beginning... the more I use it the less FCs I get! No random reboots apart from su apps.
Click to expand...
Click to collapse
pls make your statements clearer..
i would like to test it but first fix your thread pls.
scary rom.. xD
Itry it owm my phone
billapannu said:
http://www.multiupload.com/70KO36BEV0 TRY THIS BETA ROMS IT MADE THIS ROMS IS VERY SIMPLE TO WORK ON XPERIA8 WITH ALL COUNTRY WORKING NAVIGATION GOOGLE MAP FOR GMAIL TRY DOWNLOAD FROM MARKET BUGS BRIGTHNESS LINKNOT WORK 2 VIDEO RECORDING NOT WORK IF SU TRY UPDATE FROM MARKET TRY NOT UPDATE IT FRIST BACKUP UR OLD ROMS TRY IT OWN RISK
Click to expand...
Click to collapse
Specifications and screenshots please? whats new in this ROM
billapannu said:
Itry it owm my phone
Click to expand...
Click to collapse
Dude its better to explain more about ur rom..plus some screenshot..changelog..and clean and clearer statement..i mean with some "." and ","..not the whole sentences like that..people will be more happy to try flash and used ur rom trust me..and thanks for the hard work
I decided to give it a try, so I can write something about this ROM:
First of all, IT IS REAL AND IT WORKS!
Rom is pre-rooted
xRecovery preinstalled
Includes reboot to "Bootloader/Recovery/Reboot" script
Looks like clean Android 2.2.1
Boot animation tells that it is "OpenFire"
http://openfire.droidroms.com/
Works:
3G,
3MPX Camera,
GSM,
Youtube normal & HD,
Screen rotation,
Market,
Headphones detection
^^for sure
not sure about the rest - didn't test
Bugs:
Video Recording
SD Card Safe to Remove!!!! after exiting Root Explorer
Autobrightness doesn't work properly
EDIT:
ROM is light, fast & quite stable - some FCs (Youtube first run, Root Explorer first run, Market random), but only at the beginning... the more I use it the less FCs I get! No random reboots apart from su apps.
it only beta roms for try to u
for remove SD card remove bugs first go Su app now click root explore link. and now click forget it link after that reboot the phone hope this method help u
Is it ported from HTC Wildfire or built from the scratch?
How about RTL languages support?? Persian/arabic??
Sent from my E15i using Tapatalk
billapannu said:
for remove SD card remove bugs first go Su app now click root explore link. and now click forget it link after that reboot the phone hope this method help u
Click to expand...
Click to collapse
Can anyone confirm this actually fix's safe to remove SD bugs. Maybe works on other roms if it does.
Sent from my X8 using Tapatalk
furrabbit.nh said:
Can anyone confirm this actually fix's safe to remove SD bugs. Maybe works on other roms if it does.
Click to expand...
Click to collapse
is not working...
billapannu said:
for remove SD card remove bugs first go Su app now click root explore link. and now click forget it link after that reboot the phone hope this method help u
Click to expand...
Click to collapse
...i take back what I said on your previus threat... You just dont know english....
i like your effort in building the rom,
looks greats to me, basic things are working,
yet, same bugs..
anyway, i wish you could still make more improvements to this rom,
it is still in beta mode so i'll wait for updates..
I've add Sanefirst Rom description to first post.
I do not have an X8, if anyone wanna make some screenshoots and a better descrition, i will be glad to add it to first post.
I'm sure that OP doesn't mind it.
Downloaded file from HF and cant see file !!! Error bad reading (
Sent from my E15i using Tapatalk
I've update it over my Nexusv2 ROM and I don't see anything special in these "open rom"
Sd card to remove bug, video rec bug, and the phone restart's when you have too much RAM usage :/
quadrant score about 1104 (on the nexus was qudrant score 1230)
and what is the difernce between this ROM and floyo from ratch or nobodyatall's miniCM???? can anyone explain it...
rafcamora91 said:
and what is the difernce between this ROM and floyo from ratch or nobodyatall's miniCM???? can anyone explain it...
Click to expand...
Click to collapse
main difference is that it's not based on CM sources...
DarkThanos said:
...i take back what I said on your previus threat... You just dont know english....
Click to expand...
Click to collapse
That makes perfect sense to me and I'm English :S
Press THANKS button if this guide helps you.
Since we know that CM9 RC2 is too buggy, we are forced to use RC1 instead, until its fixed by Wayland.
This is just for you guys stop once for all asking about etas and other stuff anoying.
Please, after read this, dont make any question about camera, kernel updates or deep sleep.
Follow this and get the RC1 ROM from Maclaw working with 100% camera from RC2, but without its bugs like GPS and Bluetooth not working, SDEXT not recognized etc...
BEFORE you start flashing this, make sure you have enough space on system/app, because libs and camera app from RC2 are bigger than RC1's. Delete some ringtones you dont use or some apps. The same for kernel, the dev says about 4~5 MB free space, i recommend about 7MB, for kernel and camera app. (delete the CMWallpapers apk, it has 7,04MB, and im sure you dont use it)
1st, download Maclaw's CM9 RC1 ROM
DOWNLOAD
If you already have it, skip this step, if you dont, make a full wipe then flash it. Reboot your phone.
2nd, download Nims Kernel 2.1 with Camera app and libs fully fixed from RC2
DOWNLOAD
You don't need to mount this, just flash it. After flash, reboot your phone. If everything was right, the screen "Updating/Starting Apps" should appear. When the system starts, test the Camera app, it should start normally, if you get some FC screen, or "Cannot conect the camera" message, try to re-open the app. This message will appear sometimes, even in 3rd party apps, like Instagram, but is just you re-open it.
3rd, download the lastest Nims Kernel available
DOWNLOAD version 2.2.1 for ICS ROM
This ZIPs files are from this thread, i just put them together for make it easier for you guys.
I'm not responsable if it bricks your phone.
For me and a lot of people it works.
this was what I needed, now I'll change to ics again and finally I definitely thank you very much
Nice tip, but wrong section
diegonnc said:
Nice tip, but wrong section
Click to expand...
Click to collapse
already changed
If you follow this guide exactly as you put it, you will end in a bootloop just like me.Explain better
Very good work
Well just tried all the steps above but sadly it isn't working .
After I flashed nim's 2.1 kernel the phone boot into system upgrading screen and stuck there , I did a restart and the phone got stuck on a boot loop.
Flashing nim's 2.2 kernel after that didn't helped either ..
Please explain the procedure in more details.
Thanks Devs!
urban191 said:
Well just tried all the steps above but sadly it isn't working .
After I flashed nim's 2.1 kernel the phone boot into system upgrading screen and stuck there , I did a restart and the phone got stuck on a boot loop.
Flashing nim's 2.2 kernel after that didn't helped either ..
Please explain the procedure in more details.
Click to expand...
Click to collapse
You might do something wrong...
you dont need to mount system for flashing this zips....
Try to make a full wipe and flash RC1 again, reboot as normal. After that flash cam app and libs with nims kernel 2.1. Reboot again.
Then flash Nims kernel 2.2
Just for guarantee, after you wipe install RC1, delete somethings you dont use in system/app, because cam app is biggest than RC1's.
Some screens of this working properly
Nice tips, thanks. Can I ask you a question??? Does this ROM drains battery much??? The last time I use it, it drains like hell. I need to know if it still drains battery so I can apply your tips
Sent from my GT-S5830 using xda app-developers app
Well got this thing working , Thanks @jmendes.
Edit : After using this ROM for a while I found out that deep sleep isn't working .. ( google location was off )
For me deep sleep works until i take some 5 pics... after that the camera stops and i need to re-open it. Then deep sleep sucks as well :c
jmendes. said:
You might do something wrong...
you dont need to mount system for flashing this zips....
Try to make a full wipe and flash RC1 again, reboot as normal. After that flash cam app and libs with nims kernel 2.1. Reboot again.
Then flash Nims kernel 2.2
Just for guarantee, after you wipe install RC1, delete somethings you dont use in system/app, because cam app is biggest than RC1's.
Click to expand...
Click to collapse
I used nims kernel fix 2.2.1 not 2.2 in last step. Maybe you should update your 1st post
Gesendet von meinem PASCAL2 mit Tapatalk 2
Mardon said:
I used nims kernel fix 2.2.1 not 2.2 in last step. Maybe you should update your 1st post
Gesendet von meinem PASCAL2 mit Tapatalk 2
Click to expand...
Click to collapse
already changed tnx
[N]ano® said:
Nice tips, thanks. Can I ask you a question??? Does this ROM drains battery much??? The last time I use it, it drains like hell. I need to know if it still drains battery so I can apply your tips
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
ROM stays unchanged. If you had use RC1 when it was out, it keeps the same way. Obviously, battery will drain faster than CM7, but it just need some adjustments by the devs, hope itll fixed in Wayland's release
It might even "work" (not sure if the need for closing and re-opening the camera app several times means fully working...) but I doubt the quality of the pictures will be as good as in a GB based ROM.
For me or anyone who uses the camera sometimes and don't want crappy quality pictures, any ICS or JB ROM shouldn't be considered for now. In fact, without OpenMax drivers I guess we'll never see camera working properly on Galaxy Ace running ICS and JB
spfc_jcp88 said:
It might even "work" (not sure if the need for closing and re-opening the camera app several times means fully working...) but I doubt the quality of the pictures will be as good as in a GB based ROM.
For me or anyone who uses the camera sometimes and don't want crappy quality pictures, any ICS or JB ROM shouldn't be considered for now. In fact, without OpenMax drivers I guess we'll never see camera working properly on Galaxy Ace running ICS and JB
Click to expand...
Click to collapse
Jesus Christ! Fully working for our situation means a app who opens and take a photo with auto focus, flash working properly, with all configurations available with a gallery without bugs AND apps 3rd party accessing camera drivers! It's known that it has a lot of bugs, but its better than an app that just take pictures and break deep sleep resource. Everybody knows that OpenMax drivers wont be release for us, and a camcoder wont be available either, bbut they are really working hard to give us a decent camera. The quality is the same on GB. As you said, "shouldnt be considered for now" so dont use it. If you think it's not worth it, stay with your 2.3 version.
jmendes. said:
Jesus Christ! Fully working for our situation means a app who opens and take a photo with auto focus, flash working properly, with all configurations available with a gallery without bugs AND apps 3rd party accessing camera drivers! It's known that it has a lot of bugs, but its better than an app that just take pictures and break deep sleep resource. Everybody knows that OpenMax drivers wont be release for us, and a camcoder wont be available either, bbut they are really working hard to give us a decent camera. The quality is the same on GB. As you said, "shouldnt be considered for now" so dont use it. If you think it's not worth it, stay with your 2.3 version.
Click to expand...
Click to collapse
Hmm, you said that flash is working properly ... is the LED working for flashlight apps as well in this ROM ? Last time I tested CM9, it wasn't working and flashlight is very very useful, can't live without it. If yes, I'll try it.
By "camera working properly" I meant taking photos with good quality, and auto-focus and flash both working. That is enough. I did'nt say "fully working".
spfc_jcp88 said:
Hmm, you said that flash is working properly ... is the LED working for flashlight apps as well in this ROM ? Last time I tested CM9, it wasn't working and flashlight is very very useful, can't live without it. If yes, I'll try it.
By "camera working properly" I meant taking photos with good quality, and auto-focus and flash both working. That is enough. I did'nt say "fully working".
Click to expand...
Click to collapse
Go until Wayland's CM9 topic and you will see that for this he will need to put a modified app for flashlight working. But still works.
And yes, the quality keeps as in GB. With auto focus, flash and cam modes working rightly
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
helderhalen said:
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
Click to expand...
Click to collapse
Try flashing ICS/GB, but I doubt it will help. Unfortunately it sounds like a hardware problem
Grof87 said:
Try flashing ICS/GB, but I doubt it will help. Unfortunately it sounds like a hardware problem
Click to expand...
Click to collapse
Will try that but i think its a hardware problem too , i just want to be sure ,to buy a new display and make it work.
helderhalen said:
Will try that but i think its a hardware problem too , i just want to be sure ,to buy a new display and make it work.
Click to expand...
Click to collapse
Can you post the link for the ICS/GB?? i want to download that.
Thanks
did you found the fix?, i'm having a similar issue, sometimes the back button just stop working, i'm also on cm11
jesus.sea said:
did you found the fix?, i'm having a similar issue, sometimes the back button just stop working, i'm also on cm11
Click to expand...
Click to collapse
No man its been the same , but i didnt try another rom so , but i doubt it is the cyanogenmod causing the problem since it always worked great, i just want to know if this is a hardware problem or software one.
jesus.sea said:
did you found the fix?, i'm having a similar issue, sometimes the back button just stop working, i'm also on cm11
Click to expand...
Click to collapse
If back button stops working sometimes, try opening keyboard(xperia or aosp whichever) and then try again to see if back button works or not.
If it works- it means your keyboard gets killed and as a result back button stops working or you have greenified keyboard or it occurs after you exit from heavy games. Try it
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
helderhalen said:
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
Click to expand...
Click to collapse
There Are Lot Of guides available in general section to fix broken touchscreen problem. Try it http://forum.xda-developers.com/showthread.php?t=2104484
Personally by installing cm 9,10,11 didn't work for me. Fix 9 worked for me.Hope it helps
Dr. Joy Das said:
If back button stops working sometimes, try opening keyboard(xperia or aosp whichever) and then try again to see if back button works or not.
If it works- it means your keyboard gets killed and as a result back button stops working or you have greenified keyboard or it occurs after you exit from heavy games. Try it
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
There Are Lot Of guides available in general section to fix broken touchscreen problem. Try it http://forum.xda-developers.com/showthread.php?t=2104484
Personally by installing cm 9,10,11 didn't work for me. Fix 9 worked for me.Hope it helps
Click to expand...
Click to collapse
Where do i find .62 firmware ??
Thanks
helderhalen said:
Where do i find .62 firmware ??
Thanks
Click to expand...
Click to collapse
Here you go my friend: http://forum.xda-developers.com/showthread.php?t=1439298 Try mirror link
For other versions: http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3
Dr. Joy Das said:
Here you go my friend: http://forum.xda-developers.com/showthread.php?t=1439298 Try mirror link
For other versions: http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3
Click to expand...
Click to collapse
Can someone explani me these steps better? do i need to go to CWM to install the zips? or just with the flashtool? Im newbie in this
Fix 9: By flashing Real ICS R6: (Credits: Kenzeu ; here)
Steps:
1. Flash .62 firmware for your device
2. Flash rage kernel for gingerbread
3. Flash Real ICS R6 rom (choose the wrong device)
4. Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
5. Flash the stock firmware for your device
6. Touch should work now!
helderhalen said:
Can someone explani me these steps better? do i need to go to CWM to install the zips? or just with the flashtool? Im newbie in this
Fix 9: By flashing Real ICS R6: (Credits: Kenzeu ; here)
Steps:
1. Flash .62 firmware for your device
2. Flash rage kernel for gingerbread
3. Flash Real ICS R6 rom (choose the wrong device)
4. Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
5. Flash the stock firmware for your device
6. Touch should work now!
Click to expand...
Click to collapse
Real ICS R6 rom should be in your memory card
First flash 0.62 ftf file using flashtool program
Now flash rage kernel using flashtool program
Go to CWM, flash Real ICS rom...... but select wrong device e.g if your mobile is mini pro, select satsuma(active) as your phone
Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
Flash again 0.62 ftf using flashtool program
Check if touch is working now
If unsuccessfull, try other methods.. no choice:crying:
If all methods fail, then only repair the touchscreen. By friend also had sam problems but after such tedious process his touchscreen worked finally
Dr. Joy Das said:
Real ICS R6 rom should be in your memory card
First flash 0.62 ftf file using flashtool program
Now flash rage kernel using flashtool program
Go to CWM, flash Real ICS rom...... but select wrong device e.g if your mobile is mini pro, select satsuma(active) as your phone
Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
Flash again 0.62 ftf using flashtool program
Check if touch is working now
If unsuccessfull, try other methods.. no choice:crying:
If all methods fail, then only repair the touchscreen. By friend also had sam problems but after such tedious process his touchscreen worked finally
Click to expand...
Click to collapse
Thanks i will try that, then after, if touchscreen works can i install cm 11 again? or i will lose root and bootloader?
It worked man thank you so much, running the last cm 11 , touchscreen working great, solution found glad i didnt bought a new display ha ha.
Thanks
helderhalen said:
It worked man thank you so much, running the last cm 11 , touchscreen working great, solution found glad i didnt bought a new display ha ha.
Thanks
Click to expand...
Click to collapse
Great to hear it helped. All members will always be there to help you and remember to hit thanks button if the posts really helped you:good:
Thanks button helps others who have faced same problem to go through posts most thanked and helped so that they can also solve problem by same method
Dr. Joy Das said:
Great to hear it helped. All members will always be there to help you and remember to hit thanks button if the posts really helped you:good:
Thanks button helps others who have faced same problem to go through posts most thanked and helped so that they can also solve problem by same method
Click to expand...
Click to collapse
hi me too same problem tried all method
finally this method also but not working
i used cm11 bean stalk suddenly touch did not worked
so i flasjhed directly ics stock rom
then touch fully not working
pls help
fairy123 said:
hi me too same problem tried all method
finally this method also but not working
i used cm11 bean stalk suddenly touch did not worked
so i flasjhed directly ics stock rom
then touch fully not working
pls help
Click to expand...
Click to collapse
Have you tried this link http://forum.xda-developers.com/show....php?t=2104484
If all methods fail from here, then may be it has some hardware problem
Dr. Joy Das said:
Have you tried this link http://forum.xda-developers.com/show....php?t=2104484
If all methods fail from here, then may be it has some hardware problem
Click to expand...
Click to collapse
link not found
web page not there
fairy123 said:
link not found
web page not there
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2104484 is the link by mihahn.It is working for me. If it doesn't work, try searching general forums second page
[How-To] Fix Broken Touchscreen of xperia 2011 mdpi devices [UPDATED-18.07.13]
Dr. Joy Das said:
forum.xda-developers.com/showthread.php?t=2104484 is the link by mihahn.It is working for me. If it doesn't work, try searching general forums second page
[How-To] Fix Broken Touchscreen of xperia 2011 mdpi devices [UPDATED-18.07.13]
Click to expand...
Click to collapse
ya working thanks
but when i flash bean stalk kernel screen turns black remaining kernel booting
display light not coming hangs in boot logo with out display light
fairy123 said:
ya working thanks
but when i flash bean stalk kernel screen turns black remaining kernel booting
display light not coming hangs in boot logo with out display light
Click to expand...
Click to collapse
Please ask in the beanstalk thread, I have never used it.