[Q] Roebeets+Clemsyn's Honeycomb COMBO alpha questions - G Tablet Q&A, Help & Troubleshooting

I am new to the forum and the G Tab but have been browsing. I just got the G Tab today and wanted to pursue the Roebeets+Clemsyn's Honeycomb COMBO alpha path!
I have a few questions...
Assuming I have the 1.2 BL (4349) out of the box do I still need to re-partition the G-Tab with 2048/0MB and wipe before proceeding?
Can I skip the following steps?
1. Nvflash to 3588 STOCK DO NOT USE CWM FOR 3588
2. Do not install CWM (we need the stock recovery)
3. DO NOT INSTALL CWM (we need the stock recovery)
4. PLEASE DO NOT INSTALL CWM
5. Reboot
And start from here assuming the partition sizes are correct?
6. RENAME COMBO FILE NAME TO Update.zip
7. Move Update.zip to /sdcard folder
8. Unzip recover.zip and move recovery folder to /sdcard folder
8. Turn off
10. Press Power+Volume up then this will install Update.zip
I know I should NOT install CWM as it wont work until after I flash the ROM which I assume is included in the ROM image.
Is there anything else I need to do before proceeding? I will backup the original ROM of course.
Thanks in advance and what an excellent resource

Do you know what what alpha means? It means it's not recommended for new users. There are many things that still don't work.
That said, technically you can skip all of that. Do you even know why we recommend people to repartition to 2048/0? It's because of compatibility issues. If you don't repartition from the beginning, the system will eventually force closes everything.
I highly recommend you visit my sight. It's written for beginners.
http://viewsonic-gtablet-for-dummies.webs.com/

Yes I do know what alpha means I deal with devs all of the time. I wanted to clarify the partition sizes because it wasn't mentioned in the dev thread as most users there were already coming from previous mods. I will check out your site though and I appreciate the advice. I may be a noob to the G-Tab and Andriod but am an IT admin by trade.
Thanks!

Ok. Still, chances are you will eventually have force closing issue. And I do mean it's bad. That's why the recommendation nowadays is for people to repartition right away before they start putting their own crap into the sdcard. Partitioning erases everything in the sdcard. So, better do it now than later when you already have all your crap in there.

Agreed! I went through your sight and it was very helpful. Thanks. I didn't realize that VS kept the same partition scheme I thought maybe with 1.2 they would have made some changes for the better. But it doesn't matter I will wipe and reformat anyway. I got the G-Tab yesterday and fired it up. WOW is it slow for a dual core. My Droid X runs circles around it...
Thanks again!

Oh by the way... I configured WiFi and I dont broadcast my SSID. I setup the G-Tab for my network and but it stated "Network out of range". So I enabled the SSID and then it connected. Everything worked just fine until I turned off the SSID broadcast again. Now the G-Tab cannot states it's out of range again. Is there anyway to force it? My other Android device and iPad dont have this issue. I hate broadcasting my SSID.
Thanks!

Hey GI,
Can you verify this step from your site? In Part D after the backup you don't want to go to Install ZIP? I skipped that because it is repeated after the wipes and that made more sense...
Thanks!
Part D (flashing a 1.2 ROM)
After backup is done, ----->>>>>>go back out and select "install zip from sdcard". <<<<<<<---------
Choose "wipe data/factory reset".
Choose "wipe cache partition".
Once it's done, go back out to root menu and choose "advanced".
Choose "Wipe Dalvik Cache".
Go back out and choose "install zip from sdcard".
Go into folder "Rom" and choose the Rom that you picked from the list. Watch it install.
After ROM installation is complete, repeat steps 6 and 7 for the GAPPS file IF YOU NEED TO.
Once everything is done, go back out to root menu and choose "reboot system now".

Well, we have a rooted and ROM'd G-Tab and man it is way more snappy. Thanks again to GI for his excellent web site. The new ROM also fixed my WiFi issue

G-Tab Rom
DroidxManiac said:
Well, we have a rooted and ROM'd G-Tab and man it is way more snappy. Thanks again to GI for his excellent web site. The new ROM also fixed my WiFi issue
Click to expand...
Click to collapse
Which Rom did you end up going with? My GTAB will be here Monday. I want to get rid of the stock sluggishness but I'd also like my first ROM to have full functionality , etc so I can check out the camera, videos and all that on my new device. Maybe after some playtime I'll jump to an HC beta that still has issues.
I've done plenty of modding and ROM swapping for the last year on my Cappy, Atrix, and Aria so I'm no noob. I would just like to jump right into the most feature rich, yet stable ROM on day one so I can really check out my new device.
Thanks!

grayfoxx said:
Which Rom did you end up going with? My GTAB will be here Monday. I want to get rid of the stock sluggishness but I'd also like my first ROM to have full functionality , etc so I can check out the camera, videos and all that on my new device. Maybe after some playtime I'll jump to an HC beta that still has issues.
I've done plenty of modding and ROM swapping for the last year on my Cappy, Atrix, and Aria so I'm no noob. I would just like to jump right into the most feature rich, yet stable ROM on day one so I can really check out my new device.
Thanks!
Click to expand...
Click to collapse
Pretty much all froyo roms listed on my site have full functionality (HW accel, video, sound, wifi, camera, etc.). And all of them can be overclocked.
With gingerbread roms, you really need to overclock to get the same video smoothness that you see in froyo because of the lack of HW accel. This is not the developer's fault. And no, it's not my fault either. The mofos NVIDIA and VS decided to stop supporting their product a couple months after they were released.
I'd stay away from the honeycomb roms if I were you. All of them are in their alpha stages right now. Even though most functions work, there are still instability issues. They're only recommended for testers right now.

goodintentions said:
Pretty much all froyo roms listed on my site have full functionality (HW accel, video, sound, wifi, camera, etc.). And all of them can be overclocked.
With gingerbread roms, you really need to overclock to get the same video smoothness that you see in froyo because of the lack of HW accel. This is not the developer's fault. And no, it's not my fault either. The mofos NVIDIA and VS decided to stop supporting their product a couple months after they were released.
I'd stay away from the honeycomb roms if I were you. All of them are in their alpha stages right now. Even though most functions work, there are still instability issues. They're only recommended for testers right now.
Click to expand...
Click to collapse
@goodintentions. I thank you to provide your useful advice.

grayfoxx said:
Which Rom did you end up going with? My GTAB will be here Monday. I want to get rid of the stock sluggishness but I'd also like my first ROM to have full functionality , etc so I can check out the camera, videos and all that on my new device. Maybe after some playtime I'll jump to an HC beta that still has issues.
I've done plenty of modding and ROM swapping for the last year on my Cappy, Atrix, and Aria so I'm no noob. I would just like to jump right into the most feature rich, yet stable ROM on day one so I can really check out my new device.
Thanks!
Click to expand...
Click to collapse
I tried three or four ROMs so far. Among them, my favorite is:
Calkulin + Clemsyn Combo Overclock at 1.5 ghz v5 (Froyo)
It is impressively fast, and the phone function works right of the box. It integrates nicely with either Google voice or Skype.

Calkulin's rom is by itself an already super fast rom. It's actually based off of the TnT. Incredible how he was able to make it work so well.

Related

[Q] First experience with Android

Hi all,
I am new to android. First time using it and really know nothing about it.
Bought the G tab at woot. I am knowledgeable with computers, so I hope that helps. Over 50, so need your help here.
I have spent a decent amount of time looking through these forums and there is so much information here, it is hard to discerne what is relevant for me.
I did the OTA update. I do not have an sd card, so all will be through the usb to my home computer.
I have played with the gtab a bit, but I figure, before I go and do a bunch of setup for the family and download apps that if I am going to root it, I may as well do it now. Those of you with experience using it don't like viewsonics version, so I assume that these ROM's must be so much better.
From this thread http://forum.xda-developers.com/showthread.php?t=842004
it reads that if I have stock gtab, I can simply install TnTLite 4.4 without clockworkmod. I assume then that without colckworkmod, I can't clear the cache or datafiles. Do I really need nvfLASH? I read it and it sounds a bit confusing.
I read that you should repartition the gtab. I looked and can't find out how to do this. Is this before or after you run the mod?
For the market fix, http://forum.xda-developers.com/showthread.php?t=845175
I follow the link to download the zip file. When I download apps from the computer, where on the gtab do they go to unzip them?
What does sideload mean? What do you mean when you say make sure that market is working with your google id? do i need a gmail account?
On a side note, the gtab will not load up my yahoo mail account? hmmm, is that correct? My wife has an old aol account that she uses and she said she can't respond to emails, that is true also?
Thanks in advance,
Kozmokrmr
Lots of questions... let's see what we can do here...
Yes, You can setup TnTLite 4.4 without ClockworkMod. However, CWM is included in the install as part of the 3588 Recovery Pack. You can actually switch it in and out as needed for the purposes of clearing caches and wiping data.
Repartitioning is one of the advanced functions of ClockworkMod. You will not likely find it necessary unless you're doing lots of modding (or are particularly anal about procedure, like I am...).
It doesn't really matter where you download or unzip files to as long as you know where they are. I leave them in the default download folder or create a folder for the particular project on one of the sdcards. Sideloading consists of downloading an app's .apk file to the tablet then installing it without using the market. Most file managers (including the one included on the gtab) do this with a click or two.
Yes you will need a gmail account to make the market work. When you start it the first time it will ask for your gmail credentials to log in.
There is a Yahoo mail (and IM) client/app. Not sure about AOL. But either can be accessed through the web browser.
All that being said... if you are planning on using the "Family" accounts setup that comes stock on the G Tablet you'll want to try that before loading any custom ROM. They all replace the contacts app which is required for that to work. I'm not sure if any of the custom ROM's supports any kind of multi user setup.
Thank you K J Rad
To enter clockworkmod, then just use the power and volume up to access clockworkmod from 3588 update? Then do the data and cache clearing? Is clockworkmod, just a tool to do a few system functions?
Ok, then I won't worry about repartitioning.
Hmm, alright, I guess I'll just give the sideloading a go and see what happens.
About NVFlash, should I worry about it or is it only for the guys who switch out roms and play around with it? I figure, once I install a mod, other than maybe updating the rom, I won't be yanking around with it like this anymore.
Ok, then we'll get a few gmail accounts. Thanks.
The internet on the gtab wouldn't access my yahoo. Possibly I need to upgrade yahoo to the paid version to get the pop account.
The AOL account could be read, but she couldn't reply to any emails. Possibly the same problem there.
No big deal about the family accounts, we don't need them. Its not an issue.
The people here I read that have issues (not booting up, stuck in a loop, etc.) have what? done a step wrong, played around a bit too much or just one of those odd software flukes that catches some guys?
So there really is a BIG difference in the stock rom and the modded roms's, yes?
Thanks again.
Power and Volume Up enter "Recovery Mode." If ClockworkMod is installed then that is what you will get. Otherwise you'll get the stock recovery. 3588 does not install CWM. There is a very good thread "Stickied" in the development section about installing Clockwork, ROMs, etc. Once you've got that installed the instructions for installing TnTLite 4.4 and switching between the two types of recovery are in the stickied TnTLite thread. I usually do a data wipe before and after installing a ROM (it works for me... YMMV).
Knowing how to nvflash could be the difference between nirvana and complete disgust. It may never come up but if it does then you will be thrilled that you know how.
Once you have the market installed and working download a better browser. I use Dolphin HD and it works with my Yahoo account just fine (after you tinker with it's settings a bit...). Probably work fine for AOL also. If not, try Opera Mobile.
Any number of things can cause the issues you'll see posted about here. I've suffered magic number mismatch, boot loop, FC's... the whole gamut. If you get comfortable with the tools then you'll be able to recover from anything. Good practices will also lead to greater success. For example, when I'm flashing to a new ROM I do the following:
1) Cache and Data wipe.
2) nvflash to Factory install.
3) Update to 1.1-3588 build.
4) Data wipe (probably not necessary but wth...)
5) Proceed with update.
For experimental builds I modify that to include repartitioning.
Following this procedure has reduced my occurances of unexpected issues to near zero (I don't always remember to do every step...).
Yes... the custom ROMs are "Better" but better is subjective. I like TwoTapsX for its speed and stability though it does suffer from a few video artifacts from time to time. TnTLite is a good solid daily driver for the average user. VEGAn is popular with a lot of power users. Each has its tradeoffs and even the stock ROM has some advantages (easy to use custom interface, decent basic set of integrated apps, settings optimized to reduce confusing options).
Welcome and enjoy.

[Q] With latest stock update is custom ROM still important?

I have a Gtablet enroute right now and have been doing a lot of reading the last few days. When first released all the talk was that it was a nice peice of hardware but to be any good you had to use a custom ROM with it. Is this still the case with the latest 4xxx update?
Pexcer,
It all depends on what you want. That's what the choices XDA offers here are all
about.
When we started with G-Tablets back last fall, the software was so bad it was
almost unfunctional. It has improved with each update. With 4349 installed you
can put your apps on it and have a functional tablet -- but whether it is good enough
for you is your call.
There are a number of alternate ROMs and each has it assets and liabilities.
The only way I know to approach it is to read the threads related to each rom and
see what those advantages and disadvantages are. You can eliminate some that way.
And whatever you have left, you will just have to try and see what you like.
I know this is not the "Go use the _______________ rom" that a lot of people will
give you -- but I'm not pandering for anybody's rom. I believe everyone should
research, try and make their own choice.
Rev
Pexcer said:
I have a Gtablet enroute right now and have been doing a lot of reading the last few days. When first released all the talk was that it was a nice peice of hardware but to be any good you had to use a custom ROM with it. Is this still the case with the latest 4xxx update?
Click to expand...
Click to collapse
I'm more inclined to go with the fastest rom I can get my hands on. I don't care about looks. And stock rom will never be able to fun as fast as custom rom.
That said, you should make this decision on your own. Depends on what you want. If you are like my brother in law who wants everything to be official and fully officially supported, then I suggest you stay with the stock upgraded rom. If you're like me who doesn't care that it's the official release and would rather have a super fast tablet, then custom rom is definitely the way to go.
In another thread, I was endorsing the new calk/clems combo v3, which my quadrant test resulted in 4081. I've posted a picture in this post. Right now, the only thing that seems to be faster than this is the modded xoom, which is only about 80 more. I highly doubt the stock rom will ever be able to give us this much power.
Thanks for the response. I may try the stock UI for a few days when I get it. I have been having difficulty in really seeing the differences between the different ROMs out there though. One thing I plan to do a lot is watch TV shows I've downloaded from TVtorrents, these are 720p x264 in an MKV, is there one mod that can handle Video like that or is that a non issue. I can also grab non HD formats which would have a higher chance of working, but would rather not.
I've also read that hulu can be made to work, at least on one ROM, can't recall which now. If one does Hulu and another doesn't that would be an issue as well. I only download shows that Hulu or Netflix doesn't have.
Any guidance from people familiar with the different options would be appreciated, might save me from some trial and error in the next couple weeks.
Pexcer said:
I've also read that hulu can be made to work, at least on one ROM, can't recall which now. If one does Hulu and another doesn't that would be an issue as well. I only download shows that Hulu or Netflix doesn't have.
Any guidance from people familiar with the different options would be appreciated, might save me from some trial and error in the next couple weeks.
Click to expand...
Click to collapse
Torrents blows goats. their download speeds are as fast as my original G Tab os. File Hosting is the way to roll.
Off my soapbox, I agree with goodintentions. Speed and stability is the key. after that, ADW, 3D Launcher, VTLauncher and a few other Home screen launchers can customize your experience. let us know how yours runs. I won't go that route until the ROM's for it (1.2) are out and stable.
I don't have the newest update that just came out, so I can't comment on that. But I can mention why I went back to the stock ROM. I got my g tablet when woot was selling them. I left the stock rom on for a week and it worked pretty well as a shared device between me and my wife. The stock apps let you keep separate accounts. I put on clockwork and formatted the drive as recommended, then I tried TNT lite, g harmony, and cyanogen. They make your tablet like a big phone. When you sign in to the google apps, all you contacts, calendar, and emails are imported. This didn't work so well as a shared tablet. I decided to leave clockwork mod and the recommended formatting but put the original ROM back on. With the proper formatting, the thing isn't too bad. Probably not as fast as some of the folks here would like, but it serves our purpose as a shared device.
Half the fun (and half the aggravation) is trying different roms. Which is best? That is hard to say. Here is what I suggest. Don't get the latest update with the locked bootloader because then there is nothing you can play with. Get Titanium Backup so you can back up your apps. Learn how to connect t o your pc with usb so you can copy your stuff safely away while you play. Install clockworkmod so you can fix things and install different roms. NVflash is also a good thing to set up and learn but you don't have to right away unless you got the latest update. Now do this.
1. Use clockwork mod to make a backup of your original rom and copy it to your pc.
2. Download and install a new rom calkulin/clemsyn is nice. Use clockwork mod again to make a backup of that installation.
3. download another rom and install. Use clockworkmod to make a backup of that one.
4. When you've tried enough of them you can decide which one you like and restore it using clockwork mod.
5. Changed you mind? Restore one of the others!
6. Rinse and repeat as needed.
Remember Titanium Backup will backup your apps and data - so, if you install a new rom you can restore your apps and data. That means you don't have to go fetch them all in the market and you don't have to restart angry birds at level one.
There are lots of tutorials on how to do this stuff - read the stickys.
Good luck
Try a bunch of ROMs
I agree with enigma. I got my Gtablet last week and immediately updated hoping that the new stock ROM was good enough. It isn't. It's slow and "chunky" plus doesn't have access to the Android market.
I've heard good stuff about the calkulin/clemsyn and Vegan. Being that Vegan is Honeycomb I just went with that though I really should have tried calkulin/clemsyn too as so many must like it for a reason.
I'm new to Android as well so don't get too hung up on the difficulty of installing ROMs. There are very clear, step by step instructions to be found here. Each install takes maybe 15 minutes. So in an afternoon you could easily install and play with half a dozen ROMs before deciding on which you like better.
enigma0456 said:
Half the fun (and half the aggravation) is trying different roms. Which is best? That is hard to say. Here is what I suggest. Don't get the latest update with the locked bootloader because then there is nothing you can play with. Get Titanium Backup so you can back up your apps. Learn how to connect t o your pc with usb so you can copy your stuff safely away while you play. Install clockworkmod so you can fix things and install different roms. NVflash is also a good thing to set up and learn but you don't have to right away unless you got the latest update. Now do this.
1. Use clockwork mod to make a backup of your original rom and copy it to your pc.
2. Download and install a new rom calkulin/clemsyn is nice. Use clockwork mod again to make a backup of that installation.
3. download another rom and install. Use clockworkmod to make a backup of that one.
4. When you've tried enough of them you can decide which one you like and restore it using clockwork mod.
5. Changed you mind? Restore one of the others!
6. Rinse and repeat as needed.
Remember Titanium Backup will backup your apps and data - so, if you install a new rom you can restore your apps and data. That means you don't have to go fetch them all in the market and you don't have to restart angry birds at level one.
There are lots of tutorials on how to do this stuff - read the stickys.
Good luck
Click to expand...
Click to collapse
if you need vpn, cifs then you need a custom ROM
It depends on what capabilities you want. I need VPN and COFS so I use TNTL 4.4. Also, you can install alternate keybaords. The custom ROMs also tend to fix a lot of issues.
Shame on Viewsonic for locking bootloader in the 1.2 branch.
ConfuciusTse said:
. Being that Vegan is Honeycomb I just went with that though I really should have tried calkulin/clemsyn too as so many must like it for a reason.
Click to expand...
Click to collapse
I know somebody is gonna see this and say something, so I figure I'll be the first to point out its gingerbread not honeycomb.
muerteman said:
I know somebody is gonna see this and say something, so I figure I'll be the first to point out its gingerbread not honeycomb.
Click to expand...
Click to collapse
haha, GB is good almost HC good so far.

Just got Gtablet, Had question about rom version/ sdcard

So I ordered a gtablet and read that flashing it will improve its performance, so I plan on doing that.
I read the guide on how to do it.
I realize each one has its good and bad points.
I am not sure what rom to use. I was going to put vegan on it as I have seen a few people recommend it. I was going through posts on the ginger edition of vegan and saw posts of people having trouble with videos. SO I am leaning towards the vegan 5.1 as people say its stable
I mainly will use the tablet to watch movies, read digital books/comics/magazines and web surf. Would vegan ginger be good pick? Seemed like people were having trouble with video.
When the tablet arrives Im assuming that I should not update it to the latest firmware? Ive seen posts about 1.2 not being compatible. Do I need to make sure I am on certain firmware to root/flash?
.
One other quick question. In the tutorial it mention that when you put clockwork on you make new partition. Does this affect the external sdcard, or is it referring to internal memory?
Just want to make sure as I ordered a larger microsd card so I will wait to flash if its needed to partition.
Thanks. If anyone has any tips or tricks you could offer Id appreciate it as well.
THank you
I'll let others answer your questions since I'm fairly new myself, but I wanted to mention a couple things.
As someone that's certainly computer literate, but completely new to tablets and android, I was able to install Vegan 5.1 following the instructions here. I've been happy with it, but still learning the ropes.
My main issue came from not having a gmail.com email address. My google account was linked to a yahoo email address and that caused issues with Google Talk (which also caused issues with the android marketplace). Other than that, it was fairly painless.
all of the things you want to do, watch videos, read books, and surf the web can be done on a Stock G-tablet. If you don't like the visual appeal of the stock rom, or want to have root access to flash kernels, etc, then you'll need to flash a custom Rom.
More than likely, the G-tablet will not be on a 1.2 firmware out of hte box. Viewsonic pulled the 1.2 update a day after releasing it. The 1.2 branch of development is working under the assumption that all future updates will be of the 1.2 form. So, if you flash a 1.1 Rom now, you may need to be prepared to flash a 1.2 rom later on, if you want future official updates.
I was usuing Vegan 5.1.1, and it worked well. It was stable, I could watch videos, read books, and surf the web, just like you want to. Recently, I flashed Brilliant Corners, which is a 1.2 version of Vegan 5.1.1. It works just the same, but now I'm prepared for any future 1.2 Roms with updates that may include hardware acceleration. The only Honeycomb rom, right now, is being developed on the 1.2 development branch. It's still in the Alpha stages, but if you ever want ot check it out, you'll need to be on 1.2.
The partitioning in the instructions does refer to the internal SD card. With any Vegan rom (from what I've observed) including Brilliant Corners, you need to add a file to each folder, including the root of the external SD card if you plan on putting any music or video files on it. You need a ".Nomedia" file. If you don't have that file, for some reason, the media gets wiped occasioanlly on reboot, waking, etc.
I have never tried any of the "ginger" roms (CM7 and Veganginger) Neither have true official hardware acceleration from NVidea, which is what causes some of the video issues.
My personal opinion...since you are a new user, and have a virgin G-Tab, I would suggest that you flash a 1.2 Rom. If you like Vegan-Tab 5.1.1, then flashing Brilliant Corners gives you the same thing. It's not that hard a process, but it's more involved than just flashing a 1.1 rom. The advantage you have right now is that you are bone stock, so you're already halfway there.
Regards,
Todd
Doesnt flashing make the tablet run smoother and give you the android market so you have more apps to choose from?
I'll admit Im getting discourage from reading the forum. Seems like after you flash a rom then you have to do alot of this to get that working again afterwards. Like it will be one problem after another.
Is this the case? Or is it just that people dont post when it works only when it doesnt making it seem worse to people looking around.
I was looking around and see some posts about running nvflash first before anything else.
I tried searching for a guide on it but couldnt find one on how to make initial back-up before I start flashing.
Can anyone post the correct link?
I see other posts about clockwork recovery.
So I am not sure what to do.
Should I just follow this guide http://forum.xda-developers.com/showthread.php?t=865245
or should I do something more?
Don't be discouraged, the problems don't happen to everyone, and most are resolved.
If you know how to work a computer and can follow instructions you should be fine.
I got my g Tablet in april, it still had the original ROM on it, from the time I opened the packaging to the time I got VEGAN Ginger running on it was about 40 minutes, and most of that was from downloading and installing things on my windows machine, lol.
Once I got VEGAN ginger running I haven't had any major issues with it. I have full access to the Android market, the Amazon market, and the NVIDIA market.
The VEGAN ginger runs Tegra games great BTW, Dungeon defenders and GunBroz both run flawlessly.
It's definitely worth it to put a custom ROM on, and VEGAN ginger is a good choice.
If you'd like, later I'll try to put a few movies on it and play them, that's one thing I haven't done. Also I've heard theres a netflix app available, I'll try that as well.
Doesnt flashing make the tablet run smoother and give you the android market so you have more apps to choose from?
Click to expand...
Click to collapse
I would say that originally customs roms made it run smoother, only becuase the original stock rom was pure garbage. As for android market fixes, you don't need a custom rom for them.
Seems like after you flash a rom then you have to do alot of this to get that working again afterwards. Like it will be one problem after another.
Click to expand...
Click to collapse
It depends on the rom, I think. Some of them are still in development, so aren't the completed versions yet. I can tell you that my first flash of Vegan 5.1.1 worked flawlessly. Everything worked as I expected it when I was done flashing.
I was looking around and see some posts about running nvflash first before anything else.
Click to expand...
Click to collapse
This is preventative mantainence...being comfortable with NVflash will help you in case anything goes wrong. People suggest that you are familiar with it because many times, it's the only way to recover from a soft brick.
As I mentioned before, just about everything you want to do can be done on stock firmware. Rooting your device will give you more options, like overclocking, or running custom kernels. It will also give you the option to flash the custom roms, if you ever want to. CWM will give you more recovery options, enabling you to make a backup of your system, etc.
If you find that stock firmware isn't workign up to your standards, then by all means, take the plunge and root your device, install CWM, and flash the rom of your choice.

Q&A: [ROM-1.2/GRJ90] CM7Tab for the GTab (based on CM7 Nightlies) [Update: 08-15-11]

Q&A: [ROM-1.2/GRJ90] CM7Tab for the GTab (based on CM7 Nightlies) [Update: 08-15-11]
MOD EDIT: THIS IS THE Q&A SECTION FOR [ROM - 1.2] CyanogenMod 7 nightlies for the GTab
ALL Q&A FOR THIS ROM HAPPENS HERE.
Thanks.
---------------------------------------------------
As suggested, I have decided to make my own thread for the Cyanogenmod nightlies and other ROMs. It will make things a lot easier in the long run.
Disclaimer: as with the other Roms, Use at your own risk! Since the CM7 nightlies are basically an ongoing beta, you run the risk to brick your Gtab if you are not careful. Use to learn NxFlash first before attempting to flash ROMS. Also, do yourself a favor and get Titanium Backup! Always backup yours apps/settings and wipe data/cache/dalvik before flashing.
These will be using the bootloader's 1.2 Pershoot's kernel (2.6.32.43 / 1.4 ghz Kernel) for GB. This ROM works with the Gtab and should work with the ZPAD altough I have no confirmation of this yet.
Thanks goes out to: Team Douche/Cyanogenmod Devs for making a great ROM, Zyhong for showing me how to update to 1.2 and a few more tricks, Maxdamage for taking the time to compile the nightlies for 1.1 users, Pershoot for making such a great kernel and Roebeet for being the one that inspired me to take my journey down the Android rom lane.
1) latest version of CM7Tab: CM7Tab build 08082011 (Nightlies changelog)
2) Test CM7Tab with 4950 drivers: Test Build 08152011
Changes in modified version
1- replaced DSPmanager.apk with a previous version that is known to work (7.0.3) (if you open it, it FCs)
2- vold.fstab is setup as sdcard for internal storage & emmc for external card
3- using pershoot's 2.6.32.43 GB kernel for 1.2 bootloader (For more info, check his blog.
4- Read_ahead_kd increased from 128 to 2048.
5- Set up overclocking by default and battery saver script + cpu governors via userinit.sh (from Zyhong's ROM, based on Caulkin's scripts).
6- Replaced Camera libs & apk to stop the 8-bit pixelling.
7- Increased dalvik.vm.heapsize to 64m (07102011)
8- Set some values to improve video playback (07272011)
9- Changed values for lowmemorykiller minfree in init.rc (08072011).
10- changed EMMC to microsd (08072011)
11- updated ROM up to 2.3.5 (08072011)
12- Camera fix (08082011)
To-do list:
1- remove some apks (such as Rom manager) & create a removed apks folder.
--------------------------------
Issues:
1) Once you set up DSPmanager, it force crashes.
1) Vanilla CM7 nightly (only vold.fstab was modified): Latest build: Build 07262011 (Changelog)
If you have suggestions/ideas, do not hesitate to share them.
thank you.
Going to give it a try, tried cm7 a while ago and was great with it but seemed a bit slow. On Iluminate now do I have to flash back to stock?
Sent from my Android Illuminate using XDA Premium App
nelomen said:
Going to give it a try, tried cm7 a while ago and was great with it but seemed a bit slow. On Iluminate now do I have to flash back to stock?
Sent from my Android Illuminate using XDA Premium App
Click to expand...
Click to collapse
How long ago did you try it? I try to play areound with CM7 with the CM7tab ROM to see if I can speed it up a little as well. You can give it a try and tell me what you think.
Icewyng said:
As suggested, I have decided to make my own thread for the Cyanogenmod nightlies and other ROMs. It will make things a lot easier in the long run.
Disclaimer: as with the other Roms, Use at your own risk! Since the CM7 nightlies are basically an ongoing beta, you run the risk to brick your Gtab if you are not careful. Use to learn NxFlash first before attempting to flash ROMS. Also, do yourself a favor and get Titanium Backup! Always backup yours apps/settings and wipe data/cache/dalvik before flashing.
These will be using the bootloader's 1.2 Pershoot's kernel (2.6.32.42 / 1.4 ghz Kernel) for GB. This ROM works with the Gtab and should work with the ZPAD altough I have no confirmation of this yet.
Thanks goes out to: Team Douche/Cyanogenmod Devs for making a great ROM, Zyhong for showing me how to update to 1.2 and a few more tricks, Maxdamage for taking the time to compile the nightlies for 1.1 users, Pershoot for making such a great kernel and Roebeet for being the one that inspired me to take my journey down the Android rom lane.
Issues:
1) Once you set up DSPmanager, it force crashes.
1) Vanilla CM7 nightly (only vold.fstab was modified):
Latest build: Nightly build 07112011 (Changelog)
2) Modified version of the ROM: CM7Tab build 07102011
Changes in modified version
1) replaced DSPmanager.apk with a previous version that is known to work (7.0.3) (if you open it, it FCs)
2) vold.fstab is setup as sdcard for internal storage & emmc for external card
3) using pershoot's 2.6.32.42 GB kernel for 1.2 bootloader (For more info, check his blog.
4) Read_ahead_kd increased from 128 to 512.
5) Set up overclocking by default and battery saver script + cpu governors via userinit.sh (from Zyhong's ROM, based on Caulkin's scripts).
6) Replaced Camera libs & apk to stop the 8-bit pixelling.
7) Changed values for lowmemorykiller (07102011).
8- Increased dalvik.vm.heapsize to 64m (07102011)
RC1 version of the rom with changes: 7.1.0 RC1 with Pershoot 42 kernel
(Sorry if this is short but I will improve the thread as it goes)
To-do list:
1) remove some apks (such as Rom manager) & create a removed apks folder.
2) change the EMMC to Sdcard2
If you have suggestions/ideas, do not hesitate to share them.
Click to expand...
Click to collapse
personally I have been using your build for a while and quite happy with it except the market which sometime shows my apps and other time it doesn't. I have not tried any market fixes yet, so it is partiality my fault as well.
Icewyng said:
How long ago did you try it? I try to play areound with CM7 with the CM7tab ROM to see if I can speed it up a little as well. You can give it a try and tell me what you think.
Click to expand...
Click to collapse
I tried it today but was getting a lot of fc's, it did seem a little faster then I remember except the boot up was really slow as I remember. I did not give it a full try because I failed to wipe everything because I was at work and wasn't really supposed to be on it. I will do it again tonight with full wipe and see if it gives better results and let you know.
I just realized you have a tab build so I will try that one. The one thing I noticed right away with cm7 is that my tablet looked like a phone and I have been jumping around from HC roms and got used to a more tablet specific rom. I will give you update in a few hours I think.
Edit: have been trying for a couple of hours now but sent me in to boot loop had nvflash back to stock, will give it another shot once this silly Tap n Tap is finished loading.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
rob_z11 said:
personally I have been using your build for a while and quite happy with it except the market which sometime shows my apps and other time it doesn't. I have not tried any market fixes yet, so it is partiality my fault as well.
Click to expand...
Click to collapse
Dalingrin was kind enough to provide a fix that seems to resolve most of the problems with market (including buying apps). It was merged in build 07092011+ so give it a try and tell me how it goes.
nelomen said:
I tried it today but was getting a lot of fc's, it did seem a little faster then I remember except the boot up was really slow as I remember. I did not give it a full try because I failed to wipe everything because I was at work and wasn't really supposed to be on it. I will do it again tonight with full wipe and see if it gives better results and let you know.
I just realized you have a tab build so I will try that one. The one thing I noticed right away with cm7 is that my tablet looked like a phone and I have been jumping around from HC roms and got used to a more tablet specific rom. I will give you update in a few hours I think.
Click to expand...
Click to collapse
The FCs you were getting were probbly from DSPManager. It is a known issue that seems to come from a "broken pipe" in one of the libs. For now, it is best just to remove it.
For the bootup, someone suggested moving apps to the SD card. Apparently, it would speed up the process.
I am conscious that 2.3.4 is made with phones in mind but it is a step up from Froyo and having partial hardware acceleration helps.
Just tried again and got stuck on CM7 logo boot loop, this was with the CM7 tab build. did full wipe of cache, dalvik, and user data. Not sure what happened. Restoring to Illuminate rom if you have some ideas on how or what else I can do to try this rom let me know.
Hey there Ice.
First off, awesome work on this and thank you for taking the time.
I would recommend editing the build.prop file to set the Manufacturer to HTC. This fixes the playback issue with Netflix (Chipmunk). I tested this out fully on my gTab last night and it's the ONLY setting that needs to be modified. Aside from that, everything seems to work.
Good work!
Hi
Has anyone tried installing volume+ on this rom? I'm on BL1.1 CM7 rom but volume+ does not install. If this works, I'll take the bold step to upgrade to BL1.2.
I don't know if it's just my hardware. My gtab's speaker is very soft and I want to try cranking it up with volume+ (which works on my phone running cm7).
thanks a lot.
DroidTV phone size not full screen....Anyone have other apps that did that after....
I was using DroidTV, and it was full-screen and then rebuild my G Tab with the cm7tabl-0710200-1.2 and when I reinstalled DroidTV it is now phone size display on the G Tablet.
I used Titanium Backup to restore the app and the settings. Anyone have issues like this with an app that did that after re-installing after a full rebuild? Any build.prop setting or somewhere I could check?
Thanks. Steve.
Thanks everyone for your feedback.
@Mike: I have heard of this before and wasn't sure if anyone would be interested in it. I will change that on the CM7Tab version in the next few days.
@Vhend: Yes, Vol+ works on 1.2. You enter CWM and it works great here.
@Artful: I will look into this. It might just be that the rsolution isnÈt set right. I will let you know how it goes.
Icewyng said:
Thanks everyone for your feedback.
@Mike: I have heard of this before and wasn't sure if anyone would be interested in it. I will change that on the CM7Tab version in the next few days.
@Vhend: Yes, Vol+ works on 1.2. You enter CWM and it works great here.
@Artful: I will look into this. It might just be that the rsolution isnÈt set right. I will let you know how it goes.
Click to expand...
Click to collapse
Thanks Ice. Other than that I have yet to find any major issues that in the build.
Other than apps that open portrait only with the bottom on the side with the power button. Tried to say to not rotate 90 degrees but they still open that way Apps that open landscape then won't rotate to the 90 degree position but portrait apps still open that way
This is the most stable I have used and performance seems good. A co-workers has the same build, I installed it for them since they are techie-challenged, and theirs is turtle slow because I think they have Skype running all the time.
Icewyng said:
Thanks everyone for your feedback.
@Vhend: Yes, Vol+ works on 1.2. You enter CWM and it works great here.
Click to expand...
Click to collapse
sorry for not being clear. I did not mean pressing the volume+ button. i actually meant this app to boost the volume of gtablet.
http://forum.xda-developers.com/showthread.php?t=1023433
I guess the app has dependencies on dsp manager, that's why it did not work on my B1.1 cm7. Since you have replaced the dsp with a workable one in your rom, I would like to check if the volume+ app works here.
Appreciate your work on the rom!
vhendsume said:
sorry for not being clear. I did not mean pressing the volume+ button. i actually meant this app to boost the volume of gtablet.
http://forum.xda-developers.com/showthread.php?t=1023433
I guess the app has dependencies on dsp manager, that's why it did not work on my B1.1 cm7. Since you have replaced the dsp with a workable one in your rom, I would like to check if the volume+ app works here.
Appreciate your work on the rom!
Click to expand...
Click to collapse
Actually, I think it has more to do with a problem with one of the audio libraries. I did a logcat and it seems something called AudioFlinger can't set a parameter properly.
If anyone can fix this, I can send the logcat to help out.
I wanted to apologize for not being able to upload the new nightly today. I had to rebuild my computer and took the opportunity to switch to a new Linux distro. Just tested the new system and all is great.
I will post Build 07172011 later this morning.
Where are the nightly's getting posted now? Thanks and this is the most stable MOD I've had on my G Tab.
Do video apps work as far as no rotation with Oovoo, yahoo, reelportal, etc? Audio work okay with chatting?
mirrors:
http://dev-host.org/cops0ujuwmm0/update-cm-7.1.0-smb_a1002-07182011-1.2.zip
http://dev-host.org/8xjvaysomd1i/update-cm7tab-07102011-1.2.zip.zip
-deck

Just got a touchpad - Questions

Hey, Just got a 32gb touchpad
I want to run Android 4 on it, but i see multiple roms there. Was wondering which one has the least bugs. Im hoping for a fully functional one, but not sure whats there. CM9 seems fairly broken.
Im looking for a fully functional non WEbOS if someone could poitn me to one
Thanks!
I'm not one to complain, but there have been quite a few of these threads started recently... such as:
http://forum.xda-developers.com/showthread.php?t=1618380
As far as CM9 goes, I have been running the Alpha 2 version and have absolutely no problems with it besides the camera and mic not working, and the sound issue while the screen is off. ClassicNerd and AOKP are some good alternatives and they have a lot of support, but there are more. Best place to start is the great sticky post by MindSplit : http://forum.xda-developers.com/showthread.php?t=1552196
If you see CM9 as "broken" then dont bother with Android on your TouchPad. All CM9 ROMs are about the same as far as how stable they are. And all CM9 ROMs just about have the same issues. They are all built from the same source.
It multiboots tho, so i assume i can install as many things as i want..
Rekzer said:
It multiboots tho, so i assume i can install as many things as i want..
Click to expand...
Click to collapse
You can only install one version of android.
I currently use ClassicNerd Rom and love it. Yes, like stated earlier they all are still a little buggy. However it is very cool to multi-boot(moboot) between webOS and android . On the Android side I'm able to download apps from the market and play a load of games. PM me and I will point you to the instructions I used.
Im running CM9 now! THis thing FLIES, only bug i really care about is the audio distortion when the screen is off one, but nbd really!
Question: If i want to Update CM, i just place it on the SD and install via CWM right. How does Moboot know its CM? If i installed another rom via CWM would Moboot properly boot into it?
AND
Is the storage shared? As in, if i boot into WebOS, will it see all the files on the 32gig storage that android sees?
Rekzer said:
Im running CM9 now! THis thing FLIES, only bug i really care about is the audio distortion when the screen is off one, but nbd really!
Question: If i want to Update CM, i just place it on the SD and install via CWM right. How does Moboot know its CM? If i installed another rom via CWM would Moboot properly boot into it?
AND
Is the storage shared? As in, if i boot into WebOS, will it see all the files on the 32gig storage that android sees?
Click to expand...
Click to collapse
Yes. just place it on your sd card and install in clockwork. It's wise to wipe cache and dalvik before you flash. There may be times when you get more than one android version show up on moboot if it is two completely different ROMs but you just need to delete the other listing. there are tutorials on how to do that. and your sd card is shared. it's structured a little differently in each OS but it all shares the same storage.
Thanks a bunch guys!
One last question
I have a bunch of apps backed up via Titanium off my GSII, can those be restored safely onto the touchpad(non system apps ofc)

Categories

Resources