REVIEW: MoKo(TM) Premium Quality Slim-Fit Folio Cover Case with built-in Multi-Angle - Asus Eee Pad Transformer Prime

Just got this in today.
It fits very snug. It is extremely thin and helps show off the Primes own thinness. All ports are fit correctly including the power port. This allows for charging while closed. The clasp on this is magnetic and fits very well. Does not effect sound.
It is EXTREMELY sturdy. The clasps around the Primes screen are very unobtrusive.
http://www.amazon.com/gp/product/B0063Q3G3I/ref=oh_o00_s00_i00_details

Ordered the poetic one that looks identical to it..
Any better photos?

cyi1 said:
Ordered the poetic one that looks identical to it..
Any better photos?
Click to expand...
Click to collapse
Sure, of what part?
To be honest, it looks like the Poetic and Vipertek ones all looked the same. I think they all just buy from China and brand them.

camelontherun said:
Just got this in today.
It fits very snug. It is extremely thin and helps show off the Primes own thinness. All ports are fit correctly including the power port. This allows for charging while closed. The clasp on this is magnetic and fits very well. Does not effect sound.
It is EXTREMELY sturdy. The clasps around the Primes screen are very unobtrusive.
http://www.amazon.com/gp/product/B0063Q3G3I/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
Just ordered this.
The magnetic clasp is to keep the folio closed I assume? Is it sturdy enough to not allow it to "flop open"?
Thanks for the review.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Dr.Jeckyl said:
Just ordered this.
The magnetic clasp is to keep the folio closed I assume? Is it sturdy enough to not allow it to "flop open"?
Thanks for the review.
Click to expand...
Click to collapse
literally the first thing I did was the inverted flop test (SCIENCE!) and I am glad to inform you that there is no floppage. the clasp is minimal and magnetic.

camelontherun said:
literally the first thing I did was the inverted flop test (SCIENCE!) and I am glad to inform you that there is no floppage. the clasp is minimal and magnetic.
Click to expand...
Click to collapse
Good deal. Thanks.

Thanks for the info, it is hard to tell from pictures.
You say the clasp is magnetic? I didn't want one that "attached" to the tablet, pulling everytime I opened.
And the side clips don't stick up?
I want minimal, I have the Ipad and the best feature is the magnetic, easy opening on. The worst is no flash and Itunes - ugh.
If these are so, I will order, I'm waiting to check and see if the tf101 case like the Ipad case will work. Its stretchy, velcros closed and very minimal.

nmoreman said:
Thanks for the info, it is hard to tell from pictures.
You say the clasp is magnetic? I didn't want one that "attached" to the tablet, pulling everytime I opened.
And the side clips don't stick up?
I want minimal, I have the Ipad and the best feature is the magnetic, easy opening on. The worst is no flash and Itunes - ugh.
If these are so, I will order, I'm waiting to check and see if the tf101 case like the Ipad case will work. Its stretchy, velcros closed and very minimal.
Click to expand...
Click to collapse
its no super-magnet. Its a very small magnet with a small lip providing just enough stick. additionally there is no stitching there so its just a single piece of pleather around the clasp so there is no chance of damage to the top of the TFP.
the clips on the sides are very minimal. they barely protrude to the bezel.

got my poetic case today. it does not have cut out for the charger port. ok for $10 bucks.
i am waiting for case crown to enter the game...
Sent from my Transformer Prime TF201 using Tapatalk

That why I went with MoKo. Charger port being cut out is a huge ease of use feature
Sent from my SGH-I897 using XDA App

camelontherun said:
Sure, of what part?
To be honest, it looks like the Poetic and Vipertek ones all looked the same. I think they all just buy from China and brand them.
Click to expand...
Click to collapse
that is exactly what they do, they order from 1 manufacturer in a China plant, and once they get an order of 1000, they stamp their logos on to it.
if you look around chinese website, they have the same ones without logos
they're very cheaply made, and i believe they get them in 100's to 1000's for 5-6$ a piece at most
going to stay away from all of these till better U.S quality ones come out

That's crazy. My wife has an iPad 2 with a Targus case that looks exactly like this. What is the build quality? Is it real leather or authentic pleather? =)

Yori- said:
that is exactly what they do, they order from 1 manufacturer in a China plant, and once they get an order of 1000, they stamp their logos on to it.
if you look around chinese website, they have the same ones without logos
they're very cheaply made, and i believe they get them in 100's to 1000's for 5-6$ a piece at most
going to stay away from all of these till better U.S quality ones come out
Click to expand...
Click to collapse
The only difference is the charger port. I'd disagree about build quality but then again I have one in hand and you don't.
It's pleather. Sturdy and thin.
Sent from my SGH-I897 using XDA App

Can you do this with that Moko case? (from here: http://www.amazon.com/VIPERTEK-Transformer-Prime-TF201-Black/dp/B006OZTNIK)

mrschmitz said:
Can you do this with that Moko case? (from here: http://www.amazon.com/VIPERTEK-Transformer-Prime-TF201-Black/dp/B006OZTNIK)
Click to expand...
Click to collapse
the flap on the screen side can go either way. so... yes. looks like the only difference is the Moko is gray on the inside.

smrsxn said:
got my poetic case today. it does not have cut out for the charger port. ok for $10 bucks.
i am waiting for case crown to enter the game...
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
Which Poetic case did you get? I ordered this one yesterday from Amazon which looks similar to the MoKo case and seems to have the cut out for the charger port. If not, it's going back to Amazon and I'll order the MoKo version.

Is this case by any chance compatible with the keyboard dock?

Nope.
Sent from my SGH-I897 using XDA App

camelontherun said:
The only difference is the charger port. I'd disagree about build quality but then again I have one in hand and you don't.
It's pleather. Sturdy and thin.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
its funny how you think these are amazing quality type cases & i do have one for a regular transformer
try to look for cases for the ipad 2... look at how many quality builds there are for the ipad. i personally don't have an ipad so dont think for a sec i'm a fan of apple.
also just because they have proper positions for charge port/speaker outputs does not mean this is a good quality. Did you expect them to make a case that blocked all the ports?
Every single poetic/vertek/vipertek are just made out of cheap pleather.
They are good for its price, and i'm stating the fact that, there will be better design/quality cases for the prime in the coming months

Ugggg amazon dosent ship it to Canada any other website that sells this case?
Sent from my Transformer Prime TF201 using XDA Premium App

Related

Kindle DX Cases for GTablet

Someone posted in the huge @ss thread that they thought the Kindle DX was about the same size as the GTablet.
I went ahead and ordered this:
http://cgi.ebay.com/Kindle-DX-Leath...&otn=4&po=LVI&ps=63&clkid=5004332251969071237
I'm happy with it so far, the DX is about half and inch wider, height is okay, so it can slide around a bit. I put some stick on velcro on the case and on the GTab, it isn't going anywhere now. I think I'm going to have to use superglue for the velcro on the case though, it's felt lined so it won't stick on for long. The only thing is the top elastic band is close to the power button, maybe Roebeet's electrical tape solution is in order.
UPDATE: Oh, well my fake pleather case has ding in the edge now. Maybe I need to get some of that liquid leather. ;P Happy with the sizing, just need to find something more durable. Maybe I'll use some of that new fangled electrical tape I hear is the new duct tape.
Electrical tape is the new duct tape:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I need to do something like that, was thinking of a little piece of sticky backed foam, like 1/4 ince or so, think I have some perfect for that around here somewhere.
Hitting that power button is way to easy to do, need to mod the physical keys on the side somehow also, lol.
I found an iPad case on amazon for $14.95 that has good potential. go to amazon and search for "Acase Leather Flip Book Jacket/folio for Apple Ipad 3g Tablet/wifi Model 16gb, 32gb, 64gb (Black)" in Electroincs.
Mike Mortazavi said:
I found an iPad case on amazon for $14.95 that has good potential. go to amazon and search for "Acase Leather Flip Book Jacket/folio for Apple Ipad 3g Tablet/wifi Model 16gb, 32gb, 64gb (Black)" in Electroincs.
Click to expand...
Click to collapse
Mike, I'd be careful. I've looked at several ipad cases but the gtab is taller and not as wide as the ipad. Most I've seen dont fit unless it's a universal case.
Sent from my GT-I9000 using XDA App
Thanks for the heads up. I'll keep looking.
Well, I'll let you know how the Acase you listed works... I ordered one last night.
Whoops!
Krissy
I purchased a Solo Classic iPad/eReader portfolio case from Staples that was around $30.00. The downside is that the power button is covered by one of the soft cloth corner holders, but other than that it has worked fine.
Staples item No 912506
I purchased form fitting leather case for kindle DX from ebay . The G tablet fit amazingly well in it. The only problem is that the upper left strap is blocking the charger plug .
Looks good!! Maybe a hole punch can make your life easier.
I think this one looks promising too: http://www.amazon.com/gp/product/B002QHZ6L8
bousquet said:
Looks good!! Maybe a hole punch can make your life easier.
I think this one looks promising too: http://www.amazon.com/gp/product/B002QHZ6L8
Click to expand...
Click to collapse
Did you buy this one? If so, did it work well?
ckelly33 said:
Did you buy this one? If so, did it work well?
Click to expand...
Click to collapse
I just order that case last night, will review it soon
dingoberries said:
I just order that case last night, will review it soon
Click to expand...
Click to collapse
I just ordered mine last night too! I got the genuine leather version in fuschia . Said it should be here between the 21st and the 24th so I'll definitely post some pictures when it arrives.
nicholas621 said:
I purchased form fitting leather case for kindle DX from ebay . The G tablet fit amazingly well in it. The only problem is that the upper left strap is blocking the charger plug .
Click to expand...
Click to collapse
how tight the elastic band holding the tablet? will it slide out when you carry it around? I am thinking to purchase one right now.
tyy10002 said:
how tight the elastic band holding the tablet? will it slide out when you carry it around? I am thinking to purchase one right now.
Click to expand...
Click to collapse
The band was tighter when I first got it (infact it was so tight that it keep randomly turn on my tablet). After a few days it loosen up so the problem resolve itself. I carry it around ,always rushing to class and it feel pretty secure imo.
Lindarose84 said:
I just ordered mine last night too! I got the genuine leather version in fuschia . Said it should be here between the 21st and the 24th so I'll definitely post some pictures when it arrives.
Click to expand...
Click to collapse
LOL! I didn't know what fuschia is. Had to look it up.
Mine is also coming on the same days as yours. Hopefully it can come before Christmas so I can so I can re-wrapped my gift.
Anyone try an Oberon Kindle case? I just found them on the web. Very nice looking.
Site link http://www.oberondesign.com/KindleDX.php
...haven't figured out cut & paste on my g tablet yet, otherwise would link some awesome case pics from their site.
Just placed and order for the genuine leather case front Amazon.will post pictures once I get it.
it2steve said:
Mike, I'd be careful. I've looked at several ipad cases but the gtab is taller and not as wide as the ipad. Most I've seen dont fit unless it's a universal case.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yep. Almost all cases for iPad do not work, since the G is wider.
Happy though with my $10 Case logic (like the zip pouch).
Found this one in E-bay. looks more comtempory and cheaper..
http://cgi.ebay.com/GREEN-POUCH-CAS...306?pt=LH_DefaultDomain_0&hash=item563456485a
They also have black.. I like the green one..

Belkin Portfolio Case- a perfect fit !

bought this yesterday from my local fry's electronics when i was down there to pick up a micro sd card... fits like a glove and i am very satisfied with the look and feel of this case... posting pictures up to show people who are interested in a simple sleeve-type case with a clean look... i will be using this case when i'm hauling the pad by itself and my zeroshock laptop case for when i have it docked with the keyboard...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
belkin product url: http://www.belkin.com/IWCatProductPage.process?Product_Id=511538#
5 bux on amazon: http://www.amazon.com/Belkin-inch-N...ef=sr_1_2?ie=UTF8&qid=1304140643&sr=8-2-spell
Does it have any extra space for tablet+keyboard docked?
this is strictly for carrying the tablet alone, will not fit when docked to the keyboard.
Nice. What about space for USB cable, charger?
just a basic sleeve type case... the cable may fit with a slight bulge [?]
The sleeve is nice but your TXer background is Awesome.
I too think the background is awesome but have no idea where it is from nor what TXer is. Can you enlighten me?
A quick couple of questions for the OP. On the Belkin product page it gives the dimensions of the case as: 8.5 x 1.2 x 7.1inches. I'm assuming this is wrong as obviously the case is meant for up to 10.2" screen size devices, and the transformer is 10.7x0.5x7.1inches. On the amazon site you linked, it shows the dimensions as 11.25 x 8 X .875 which obviously sounds correct. Can you please post the actual measurements of your case? And was the model number of the case you purchased F8N215-BLK or 80-8215 please? Oh and does it feel well made? Thanks in advance.
captkronos said:
I too think the background is awesome but have no idea where it is from nor what TXer is. Can you enlighten me?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=13355322&postcount=34
stuntdouble said:
A quick couple of questions for the OP. On the Belkin product page it gives the dimensions of the case as: 8.5 x 1.2 x 7.1inches. I'm assuming this is wrong as obviously the case is meant for up to 10.2" screen size devices, and the transformer is 10.7x0.5x7.1inches. On the amazon site you linked, it shows the dimensions as 11.25 x 8 X .875 which obviously sounds correct. Can you please post the actual measurements of your case? And was the model number of the case you purchased F8N215-BLK or 80-8215 please? Oh and does it feel well made? Thanks in advance.
Click to expand...
Click to collapse
amazon is correct, 11x8 sounds about right when i've measured mine...
the model# above the barcode reads F8N215-BLK...
it feels as good as how well it fits the tf101... the faux-leather surrounding the case is a nice touch... belkin makes solid products and this case @ $5, you really can't go wrong if this is the type of case you're looking for...
captkronos said:
I too think the background is awesome but have no idea where it is from nor what TXer is. Can you enlighten me?
Click to expand...
Click to collapse
dnaL0R said:
http://forum.xda-developers.com/showpost.php?p=13355322&postcount=34
Click to expand...
Click to collapse
Actually I wasn't after the wallpaper images but where the image (the girl ) was from. Is it a film? I thought the mention of "TXer" was a reference to a film but couldn't find anything via Google
dnaL0R said:
amazon is correct, 11x8 sounds about right when i've measured mine...
the model# above the barcode reads F8N215-BLK...
it feels as good as how well it fits the tf101... the faux-leather surrounding the case is a nice touch... belkin makes solid products and this case @ $5, you really can't go wrong if this is the type of case you're looking for...
Click to expand...
Click to collapse
Thanks for the reply and the info. Yeah there's almost no excuse not to buy one at that price, unfortunately they cost a bit more here. Think i'll still get one though as it's worth it for some protection at least. Cheers.
captkronos said:
Actually I wasn't after the wallpaper images but where the image (the girl ) was from. Is it a film? I thought the mention of "TXer" was a reference to a film but couldn't find anything via Google
Click to expand...
Click to collapse
Surely TXer means Transformer?
I went to Fry's to check out the netbook sleeves. And I noticed the Tempe, AZ Fry's has the Targus Netbook Slipskin Peel 10.2 netbook sleeve for only $6.
I can't find the link on frys.com, but here is the same case on Amazon.com
http://www.amazon.com/Targus-Neoprene-Slipskin-10-2-Inch-TSS11104US/dp/B002RJQT84
Case is the perfect width (in tablet landscape), but has about an extra inch of room in height. The case feels roomy enough it could hold the tablet and keyboard dock. (no pockets to hold cables though)
Seems like a great deal from at $6 from a brick and mortar store. Just don't know if it's a YMMV type of deal though at other stores since I can't find it on the website.
i'm sure the selection varies by stores... i brought my tfmr with me and i tested out all the ones for the netbooks before ultimately deciding on the one i got... they had quite a few selection, not bad for b&m...
Be warned, the inside of this case is very slick against the tablet. This is now I dropped mine Just be careful when opening it, it'll slip very easily.
Ravynmagi said:
I went to Fry's to check out the netbook sleeves. And I noticed the Tempe, AZ Fry's has the Targus Netbook Slipskin Peel 10.2 netbook sleeve for only $6.
Click to expand...
Click to collapse
I bought this one and am returning it. It fits fine, but the metal back of the zipper rubs against the metal trim on the TF when you open/close it.
pokey9000 said:
I bought this one and am returning it. It fits fine, but the metal back of the zipper rubs against the metal trim on the TF when you open/close it.
Click to expand...
Click to collapse
yea, mine is dangerously close as well, but as long as I don't put it inside my backpack and sprint a half-of-mile, it's all good... thnx for bringing that point up.
dnaL0R said:
this is strictly for carrying the tablet alone, will not fit when docked to the keyboard.
Click to expand...
Click to collapse
Are you sure. It says it can be used for netbooks. The reviews specifically mention asus netbooks fitting very well.
timtlm said:
Are you sure. It says it can be used for netbooks. The reviews specifically mention asus netbooks fitting very well.
Click to expand...
Click to collapse
don't take my word for it, try it out yourself if you wish... i will be very impressed if it fits with the dock in place... yet, even if it did fit, it will be insanely tight, especially length-wise... thus, i wouldn't want to risk the inner zipper scratching the bezel of the pad/keyboard unit...
i already have an 11.6 zeroshock case, so i will use that when i have it docked and this belkin case for small outings around town and such...
dnaL0R said:
don't take my word for it, try it out yourself if you wish... i will be very impressed if it fits with the dock in place... yet, even if it did fit, it will be insanely tight, especially length-wise... thus, i wouldn't want to risk the inner zipper scratching the bezel of the pad/keyboard unit...
i already have an 11.6 zeroshock case, so i will use that when i have it docked and this belkin case for small outings around town and such...
Click to expand...
Click to collapse
Thanks. I ended up going with the one from this thread. It sounds like it will fit the tab and keyboard.
http://forum.xda-developers.com/showthread.php?t=1059137

[Review] Alternative Folio Case for TF

Quick Review...yes its copied from the other thread that I posted in. But I figure plagiarizing my own stuff is ok. Plus, there are pictures now!
Material: Definitely not real leather. Is PU Leather but doesn't feel "cheap" in the hand either! Inside of the case is a velvety "soft" material...I guess a cloth version of suede is the best way to describe it. (Definitely not Alcantara like the stuff I have in the bucket seats of my car.)
Workmanship: Can't complain here either surprisingly! I was expecting it to be well, just ok....but the stitching is straight and even, uniform distance from the edges (yeah I'm sure there are tenths of mm variations but...nothing distracting.) Holes for camera, proximity sensors, buttons, etc. are PERFECTLY aligned when the TF is properly inserted.
Closure: Magnetic...decent snap to it. There's magnets on BOTH ends of the case so it is quite secure.
Holding Mechanism: One of the weaknesses of this case. It has a flap that is on the landscape edge facing into the spine of folio case. Should have put a magnet or two in there to keep the flap more securely closed. Or Velcro. I think I'm going to add some velcro there myself. On the other hand, I think it is far better to have the flap on this side than along one of the portrait edges of the Tablet.
Stand angles: 2 actually, one inverted "low position" suitable for typing. One high angle for casual viewing I guess.
Conclusion: 1 thumb up--not two--because of the ridiculous pricing on these cases, $28 including shipping. Seriously, these things can't cost more than $5 in China where they are made.
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you get to the charging port while it is in the case?
Sent from my ADR6400L using XDA App
ctinsley said:
Can you get to the charging port while it is in the case?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Looks like there's a cutout in the tuck in flap but no cutout on the main cover. My guess is you can charge the transformer while in the case but that the cover has to be open.
Where did you get it? Was this one of the generic eBay ones?
I just got this case today (took about two weeks to arrive), and I'm thoroughly satisfied. It has holds for everything, even the Micro SD slot. Most importantly, the Transformer feels protected.
I just received mine today. I bought the brown version. It fits OK but overall the case is not of the highest of quality for instance there is a finger size mark on the front of the case. Can't help thinking in a couple of weeks the transformer will be slipping inside of the casehousing.
The listing on eBay said leather and I am going to complain and request a partial refund because it is definately not leather being some kind of ruberised finish and a joke of an attempt to show leather grain. I feel like I have been mislead....
tophkw said:
http://www.aliexpress.com/product-f...ree-shipping-wholesalers.html?CatId=100008232
there is a multi-angle adjustment case
Click to expand...
Click to collapse
Why are there so many people trolling the "FolioGuard" case in everyone else's threads? WTF? People KNOW there's the FolioGuard case. The point is THIS ISN'T THE FOLIOGUARD CASE AND IS A REVIEW OF A DIFFERENT CASE.
SoCalTiger, I got this one from eBay. Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dl...&ssPageName=ADME:X:RTQ:US:1123#ht_5978wt_1018
I'm beginning to wonder whether this one IS genuine leather and NOT PU leather at all. I've "aired" it a good number of days and it STILL smells/feels like leather. The patterned marks don't seem to be pressed/printed into the case at all. There's a few other tests I can "run" to see if its real leather or not (including the "match" test, but I don't really want to ruin the case either).
Thanks!
verkion
andyzarins said:
I just received mine today. I bought the brown version. It fits OK but overall the case is not of the highest of quality for instance there is a finger size mark on the front of the case. Can't help thinking in a couple of weeks the transformer will be slipping inside of the casehousing.
The listing on eBay said leather and I am going to complain and request a partial refund because it is definately not leather being some kind of ruberised finish and a joke of an attempt to show leather grain. I feel like I have been mislead....
Click to expand...
Click to collapse
Can you send/post the link for the one you ordered that you are not happy with? There DEFINITELY was NO option for "another color material" for this case. Just the variation in stitching color.
http://cgi.ebay.co.uk/Asus-Eee-Pad-...I&otn=3&po=LVI&ps=63&clkid=419235527009776241
3 different colours. Think I saw your link to the seller originally or you posted on the same thread I was reading. They were selling different colours under another listing. Anyway from the pictures you posted it is identical to mine... I think the ebay listing is misleading regarding the material.
Are you sure it isn't leather? I haven't tried the melt vs. scorch test on it yet so I'm not 100% sure. It feels like a really thin layer of leather over a harder backing...
Sent from my HTC Vision using Tapatalk
tophkw said:
URL DELETED
just like this !
Click to expand...
Click to collapse
Okay, that's it. I'm going to report every single one of your posts to have them deleted. All you are doing it trolling with your links to the FolioGuard.
100% certain its not leather. Got a reply from the the seller saying it is pv leather (I understand this to be a man made material and will never have been anywhere near a cow) which is fine but they should state this al the way through the listing. I have asked them to amend the listing and requested a part refund. If not I will report them to eBay and see what think
I am sure most people would be happy with the case and i agree with your review it does a reasonable job of proteting the Asus. The stitching is good but there is a small defect on the front of my case which
i like this case, might have to get one
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
andyzarins said:
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
Click to expand...
Click to collapse
Nice! It does say "Leather PU" now.
andyzarins said:
well I am happy with the case seeing as i have just received a full refund. I do not need to return it either. So feels like a bargain now! Just shows you it is worth complaining. I hope they amend the listing to make it clear this is not leather for other people.
Click to expand...
Click to collapse
You sir...are awesome! LOL. I should request a partial refund too! And I got 2x of them. Can't beat free!
verkion
My case arrived this weekend, but I guess I don't need to do a review either.
It's definitely a decent case for an alright price. Build seems good and does the job perfectly.
No complaints really.
Anybody know if this is the same case? http://electroniccrap.com/store/index.php?main_page=product_info&cPath=34_36&products_id=51

Case that works for gtab

Found the Tagus Truss case for the Acer Iconia fits perfectly. Very nice leather and is able to prop it up on a table.
Sent from my DROIDX using XDA App
Hey thanks for the info.I was also wondering if anyone has tried a Motorola zoom case.It looks kinda close,but wasn't if would work or not.
The xoom is about 2 inches smaller so the cases dont work. I tried to put mine in a friends xoom case
How well does it stay in the notches when in an upright position and being used? I find my CLIP from ElectronicCrap doesn't hold the bottom of the gtablet well enough when it's in an upright position and the screen is being tapped. It drops out of the notch and falls to the bottom position. :-(
Its a very tight/ snug fit. The bottom of the gtab fits onto a pocket that is as wide as the unit. I have no fear of it coming out of this case.
Sent from my DROIDX using XDA App
Actually I meant does the tablet stay upright while set in one of the notches, not whether the tablet itself would fall out of the case when in this position. Based on the design I would assume so which is better then the CLIP case does. Just wanted to confirm. Thanks.
weezel66613 said:
Found the Tagus Truss case for the Acer Iconia fits perfectly. Very nice leather and is able to prop it up on a table.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
It would be nice if you demonstrate with a pic or 2
Thanks,
Got one!
I went to Best Buy and grabbed one. Price there was $39.99, but the G Tablet fits very nicely. I took some pictures (sorry for the low light).
The Gtab slides in there very snug and secure. The top left strap just falls in between the volume rocker. It's not too bad, you can still adjust vol up & down very easily. And that same strap falls in between the power button and the USB cover. You can stil access it just fine.
I love how the case feels. You can fold back the cover all the way back and just use the tablet straight on, or you can open it and place it in one of the 3 little slots to adjust viewing angle.
I like it, it's very comfortable to sit in bed in and use. The multiple angles allows you to have it on your lap very comfortably.
http://www.flickr.com/photos/[email protected]/6082543563/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.flickr.com/photos/[email protected]/6082543399/
http://www.flickr.com/photos/[email protected]/6082543223/
http://www.flickr.com/photos/[email protected]/6082543399/
http://www.flickr.com/photos/[email protected]/6083083744/
http://www.flickr.com/photos/[email protected]/6083083608/
http://www.flickr.com/photos/[email protected]/6082542661/
What about the charging port and the headphone jack? Are they accessible as well? I got the toshiba thrive case and i'm having to take it back since the ports were not accessible. I am thinking about picking this up instead, but I don't want to have to take the tab out of the case to charge it...
Thanks!
mb
Charging port and headphone jack are not blocked. I am attaching a pic of the side so you can see.
http://www.flickr.com/photos/[email protected]/6083468318/
jaycard said:
I went to Best Buy and grabbed one. Price there was $39.99, but the G Tablet fits very nicely. I took some pictures (sorry for the low light).
Click to expand...
Click to collapse
If you are going to pay that much, why not consider the clip case then, its officially made for the GTab and even allow docking while the tab is inside it.
weezel66613 said:
Its a very tight/ snug fit. The bottom of the gtab fits onto a pocket that is as wide as the unit. I have no fear of it coming out of this case.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
agree with above..... I purchased one tonight, great fit. Plus if I did not like it, not a huge hassle to return to the local BB. Thanks to the OG poster!
aasoror said:
If you are going to pay that much, why not consider the clip case then, its officially made for the GTab and even allow docking while the tab is inside it.
Click to expand...
Click to collapse
This one allows docking just fine. The bottom of the case has the area where the docking port cut out already. Lines up perfectly
I dont like the other case, I like how this one feels
hot case usb ebay ...
jaycard said:
This one allows docking just fine. The bottom of the case has the area where the docking port cut out already. Lines up perfectly
I dont like the other case, I like how this one feels
Click to expand...
Click to collapse
Thanks for the reply.
I can't figure out how can you slide the tab in the dock with the case on. I mean its a "just fit" with only the tablet and dock, so when I tried with my own case the couple of mm's added thickness just made it impossible to dock the tablet.
Can you kindly post a pic with the tab docked while in the case ?
Canadian distributor for clip and targus cases discussed in this thread.
Does anyone know of a shop in Canada that sells either gTab CLIP case, or the Targus truss case for the Iconia?
I'm unable to find these products at staples.ca, futureshop.ca, or thesource.ca, and I don't want to pay a bunch of duty/brokerage/shipping fees getting it here.
Thank you,
Dave
dahlungril said:
Does anyone know of a shop in Canada that sells either gTab CLIP case, or the Targus truss case for the Iconia?
I'm unable to find these products at staples.ca, futureshop.ca, or thesource.ca, and I don't want to pay a bunch of duty/brokerage/shipping fees getting it here.
Thank you,
Dave
Click to expand...
Click to collapse
You can have a try:
CLIP for G tablet: http://www.dhgate.com/pv-ff8080812ed10351012eeb2bd9911b41.html
CLIP for Acer Iconia A500:http://www.aliexpress.com/product-f...-multi-angle-for-iconia-wifi-wholesalers.html Good Luck
like it
I got the targus case too and I am liking it. Yaa it is a little bulky, but it feels well made and fits the gtab gr8! I love the three angles I can prop it. It also has some serious cushioning, making me less nervous about damaging my tab.
Got it from BB for $35 after a 10% off coupon for labor day.
Picked up rooCASE leather folio from Amazon, and it fits pretty well with the exception of the opening for the power button.
I got a handy candy case for the ipad. Great for carrying, I wouldn't mind dropping it a few times in this case. It also has velcro grips that can be adusted for propping the gtab up. Not great but definitely not bad.
Sent from my Century Eyes using xda premium

Silicone skin cases for Asus Transformer Prime

They do listen! Skin cases are finally here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit: PCTABLETCASES
Will this still fit into the dock?
Sent from my Transformer Prime TF201 using xda premium
cullenmq1 said:
Will this still fit into the dock?
Click to expand...
Click to collapse
There doesn't appear to be any cutout, from the picture, so unless these are amazingly thin (which would make them somewhat useless for protection), I don't think they'll work with the dock.
But if they're easy to remove and put back on, they'd be suitable to use when the TP is out of the dock.
Has anyone ordered one of these? Just worry 'bout the quality and fit.
I wonder if they protect enough for a fall, has anyone tried this product?
I would actually like to know how is the fit with the prime, i think with such a big skin the long bezel sides won't be well adjusted to the Prime and might be too loose.
Found them in Amazon Germany, but no reviews yet :/
cullenmq1 said:
Will this still fit into the dock?
Click to expand...
Click to collapse
No. Based on the images of the green-colored case on Minisuit's site it's obvious that the TPU is too thick to fit into the dock. This being the case, I would have preferred that they fully cover the 'lock-in' slots on either side of the power connector, so they don't fill up with dust.
It seems like Minisuit had some engineer design it who didn't know what all the holes where for. BUT I'll stop complaining. A silicone case for $7 (shipping included) is great!
nerdsisme said:
Credit: PCTABLETCASES
Click to expand...
Click to collapse
I wonder if these are like the ****ty loose ones from eBay people tried
Bruuce said:
It seems like Minisuit had some engineer design it who didn't know what all the holes where for. BUT I'll stop complaining.
Click to expand...
Click to collapse
It is kind of remarkable that a company would go to the trouble of manufacturing these, but NOT bother to even see what the ports and opening actually do, to intelligently decide whether or not they need a cut-out?!?
Sheesh.
Worth a shot
Lock-N-Load said:
I wonder if these are like the ****ty loose ones from eBay people tried
Click to expand...
Click to collapse
I got one of those loose ones... pretty disappointed. I'll try this though, 7 bucks shipped is worth a try. I'll let yall know.
Lock-N-Load said:
I wonder if these are like the ****ty loose ones from eBay people tried
Click to expand...
Click to collapse
These appear to be the exact same skins just in a different color, which means that the center of the back is likely to be a little bit loose, just like with the black cases.
Mine shipped today, estimated arrival of 5/8. I'll keep ya posted.
Blah
It definitely feels like the same case, however this new one I got seems to fit a little better at the back, with less sag. I'm not sure if it was just a manufacturing difference or what. This case still has the same flimsy feel around the bezel.
My suggestion is to keep looking for another thin silicone case, if you want to give this one a shot it might be worth the 8 bucks though. I'm leaving this minisuit one one for now vs the other one I got off ebay.
Still in the market for a thin non-leather silicone type case. If anyone has seen the HP branded case for the Touchpad, that would be a near perfect case imo, with a magnetic closing mechanism or something.
Edit: After a day or so of use with the minisuit case, I feel like it is basically as good as this skin type case can get without a major overhaul. The back isn't sagging like the original one from ebay did, however the edges are still could be a little tighter (This is where the redesign would come in,) but overall its pretty good. I'm still interested in a slightly thicker version of this, it still doesn't add much protection.
For those interested, a company, BobJ Gear, is coming out soon with a very nice, silicone case for the Transformer Prime.
He's already made cases for the Toshiba Thrive, which gets rave reviews on Amazon, where they are sold.
I was lucky enough to receive one of his prototypes.
This is a tight fitting case, made from food grade silicone, very thick to provide excellent protection! Access to all ports are available. One of the photos below shows you a comparison between the cases soon to be released by BobJ Gear (shown in purple) and the case discussed earlier in this thread (the green case, on top). You'll see there's a noticeable difference in the thickness of the case, and the amount of silicone used to make the case.
This adds a little bit of weight, but provides great protection for the Transformer Prime! Case will also work for the T300, and he's planning to release a case for the T700 down the road!
These should be available end of this month.
Here are a few photos.
ShelW said:
For those interested, a company, BobJ Gear, is coming out soon with a very nice, silicone case for the Transformer Prime.
He's already made cases for the Toshiba Thrive, which gets rave reviews on Amazon, where they are sold.
I was lucky enough to receive one of his prototypes.
This is a tight fitting case, made from food grade silicone, very thick to provide excellent protection! Access to all ports are available. One of the photos below shows you a comparison between the cases soon to be released by BobJ Gear (shown in purple) and the case discussed earlier in this thread (the green case, on top). You'll see there's a noticeable difference in the thickness of the case, and the amount of silicone used to make the case.
This adds a little bit of weight, but provides great protection for the Transformer Prime! Case will also work for the T300, and he's planning to release a case for the T700 down the road!
These should be available end of this month.
Here are a few photos.
Click to expand...
Click to collapse
Not a fan but im glad to see more cases popping up.

Categories

Resources